[Q] lost recovery menu all that comes up is bootloader . - Motorola Droid and Milestone General

hi there , last time i used this forum i had forced android onto a htc diamond and you guys helped me a great deal with the problems i encountered .. this time i have a problem with my milestone .
i updated to root and 2.1 with no problems a few months ago , i was going to attempt to flash froyo onto my handset in the near future but for now i just fancied clearing everything off it .
i tried to boot into recovery menu (camera and power button) and all that came up was a bootloader that looked like normal except for an extra line of :
Err:A5,69,35,00,2F
under the bootloader version .
i also tried to boot into the bootloader and flash using rsdlite after reading about that method , ( D-pad up and power ) , this bootloader doesnt have that error line . Although my device is being recognised by rsd i am unable to flash it .
The wierdest thing about all of this is that it isnt bricked completely in that it will still boot up and allow me to make calls etc , anyhelp you guys casn offer will be appreciated .
thankyou in advance
Sean

have you tried to hold 'x' on the hardware keyboard instead of camera-button to get into recovervy?
with rsdlite try to hold the up-dpad to avoid booting before flashing the vulnerable recovery is finished.

thankyou for your fast response . holding the x button did nothing phone just booted as normal .
rsd still wouldnt flash after i held up -dpad device in rsd looks like ..
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: v0x009074
DRM Version: N / A
AP Die ID: 04200117737b0304000000000400
which i assume isnt right :S

plug the phone into rsd while booted and rsd will recognise it so you can flash as normal. this happened to me before. no biggie.

well that worked ... kinda .. it recognised the device and after several 0x7100 errors by moving the sbf file around my computer i managed to get it to flash ... only to find although it said pass it had done nothing to my phone at all and i was still unable to enter a recovery menu :S
And i can no longer access memory card :S

Ok. That is weird.
try complete uninstall and reinstall of motorola drivers and rsd. Also reseat your sd card. Redownload a fresh copy of the sbf and try again.
Sounds like something somewhere is corrupt so clean clean clean.

well ive tried about six times now and all it seems to do each time i flash it is update the bootloader and seeing as i cant get into the menu where i have the update from sd card option i cant change anything else ..
I think for now i will just be happy to use it as a phone i get to upgrade in a couple of months anyway .
Thankyou so much for your help guys .

Well one thing is clear your recovery partition is damaged/not formated properly.
But as a recovery is able to restore the bootloader, bootloader togehter with ROM is able to restore the recovery, so if one is not working phone is still not bricked at least this is how it is intended.
But with flash .sfb you got errors, that could imply bootloader also has some problems..
There is posibility that recovery part of phone is hardware damaged, so even working bootloader cant restore it, or damaged in some other way that bootloader cant repair it, maybe that were the errors for.
Than you say flashing sfb did nothing? What exactly did you mean, even phone ROM didnt get changed, or just recovery didnt? Couse maybe you can still flash sfb to change ROM. This way you will just have to stick to stock ROMs that are provided as .sfb files.
Try flashing sfb again and check if firmware is changed.

Related

[Q] Please help. Get AP Fast Boot Error at reboot

Hi everyone. I have a problem I can't seem to resolve. I tried updating to the OTA jellybean update a couple weeks ago, it seemed to go ok. I then tried to go back to an earlier version of eclipse rom I was using. Now when I power on the phone I get AP Fastboot Flash Mode (S) (Flash Failure). I can select normal boot and it will go into my ICS Rom that I have loaded in slot 1 after going thru my safestrap recovery program. So the phone is not unusable, just very annoying to use. My question is, how can I get the fastboot flash mode flash failure warning to not show up every time I reboot the phone? I've tried loading the Stock JB Rom from verizon, Blur_Version.6.7.246.xt875.verizon.en.us with RSD Lite, but when I try to extract the files with RSD, I get the error "Please check input file. Either XML format is wrong or image files associated with it are missing." I just want to be able to get a stock rom back on my phone, without any errors when I boot it, I don't care if I have root, safestrap, or anything else, I just want a properly working phone. Any suggestions how to get rid of the boot flash failure warning? Thanks!!!! Richard
Update.... Looks like I really screwed it up now. Tried to rsd lite a JB rom, got about 1/2 way, to copying system image, then hung up. Now when I reboot, it won't even go into recovery or normal mode... Stoopid operator malfunction..... Any suggestions on which rom I can try to install via RSD Lite to help get it back going? It will still go into AP fastboot mode.
He's dead, Jim. Nothing is working, no rom will load, they either fail or hang up. Now both of my batteries are dead, and it won't even try to do anything. Any suggestions?? Guess I'm in the market for another phone. Maybe some of the gurus on here have some advice. Thx.
He's alive, Jim!!!!!
rlg999 said:
He's dead, Jim. Nothing is working, no rom will load, they either fail or hang up. Now both of my batteries are dead, and it won't even try to do anything. Any suggestions?? Guess I'm in the market for another phone. Maybe some of the gurus on here have some advice. Thx.
Click to expand...
Click to collapse
Thanks to some other posts on here, http://forum.xda-developers.com/showthread.php?t=2236980 I tried installing the system and preinstall img files manually thru moto fastboot. They seemed to hang up after a few minutes, but I tried to install the files anyway. Afterwards, I was able to get into recovery mode and do a system wipe and reinstall the JB rom that I had on my SD card. Now a couple hours later, I got the pageplus 4g issue fixed again, and just finished rooting it with the tutorial on XDA http://forum.xda-developers.com/showthread.php?t=2256439.
You guys are awesome! Thanks for all your hard work.

Motorola Moto G (UK Second Gen)

Actually , my friend tried to upgrade from 5.0.2 to latest stock version.
He downloaded 133 Mb update via WiFi, and proceeded to install.
But after the phone turned off , the phone strucked on Motorola Logo, no restart, nothing.
Later he told me situation then we came to know that he is having only 232 MB left in internal memory, thus he was unable to install the update.
Even I tried to flash the ROM, but the phone isnt going in Recovery mode,
Tried many things, but none helped.
Any suggestions , to free up space and make the device usable again ?
I can't seem to understand what you have said, but from what I can tell the phone has little internal storage
The only thing I can suggest is to go into the bootloader and start flashing a new recovery. By holding the power button and volume down button will get you to the bootloader and from there it is simply Googling a tutorial.
Once you've done that, start transferring the internal files he needs to the SD card by using the recovery then wipe the phone and flash the stock or a custom rom

Soft Brick / Hard Brick ? Help...

Hi, well it looks like i have probably hard bricked my phone. After updating to nougat i decided to do afresh clean install. I wanted my phone to as if i had just bought it and came with nougat/emui 5 installed. So i did a factory reset from within the settings menu. But then i thought i would completely erase everything and start from the latest build before nougat, so emui 4.1.2/ marshmallow. So after wiping all the partitions in twrp and then doing a volume up + power to do complete factory wipe followed by using the three button method to install the B130 UPDATE.APP in dload folder on my sdcard, all worked as expected. The update completed at 100% and then rebooted. So there i am waiting for my phone to boot to start the setup process as i have done dozens of times before...BUT...my phone will not boot to the initial setup wizard. It just stays stuck on the Honor logo pulsing animation for ever and ever and ever!!!!!!
So i do the volume up + power button to get to stock recovery and do factory wipe and cache wipe as well. It works as expected so i reboot and once again use the 3 button method to install the update.app on my sdcard. That works as expected and at 100% says its succeeded and reboots. Once again i wait for it to boot to the initial setup wizard but....ALAS...it stays on that DAMN pulsing Honor logo. Ive tried rebooting it several times, redoing the factory wipe and install several times, but nothing. Ive gone into fastboot mode (volume down + power) to try and flash the boot.img and system.img ive extracted from update.app but get the error message -- remote: command failed -- and the same if i try to unlock bootloader. Obviously its not going to work because my bootloader isnt unlocked and nor can i got in to developer settings to enable oem unlock and turn USB debugging on because my phone wont boot past that bloody honor logo.
The only thing i havent done yet is to use eRecovery but i dont have broadband and i doesnt seem to work over public wifi! So i will go to my friends tomorrow and use their broadband and hopefullly eRecovery will download/restore the latest firmware. The only other thing i can think of is to download the original nem-l51c432B102 that came with my phone when bought, extract the update.app file and replace the B130 i have on my sdcard dload folder at present.
Sorry for such a long post but i wanted to expalin evrything in detail to hopefully resolve my problem without going backwards and forwards with questions and answers and taking for ever.
So ANYONE and EVERYONE who managed to read the whole post, if you have even the slightest idea of how to get my phone working, please oh please share it with me. Also my phone is still under warranty so if i needed to send it to a huawei centre to get it fixed would they do it and do it for free??? because eseentialy all i did was a factory wipe/reset and install a frmware and it goes KAPUT!! thats not my fault right????!!???
Thank you to one and all for any wisdom you can share. :crying::crying:
iantechie1979 said:
Hi, well it looks like i have probably hard bricked my phone. After updating to nougat i decided to do afresh clean install. I wanted my phone to as if i had just bought it and came with nougat/emui 5 installed. So i did a factory reset from within the settings menu. But then i thought i would completely erase everything and start from the latest build before nougat, so emui 4.1.2/ marshmallow. So after wiping all the partitions in twrp and then doing a volume up + power to do complete factory wipe followed by using the three button method to install the B130 UPDATE.APP in dload folder on my sdcard, all worked as expected. The update completed at 100% and then rebooted. So there i am waiting for my phone to boot to start the setup process as i have done dozens of times before...BUT...my phone will not boot to the initial setup wizard. It just stays stuck on the Honor logo pulsing animation for ever and ever and ever!!!!!! So i do the volume up + power button to get to stock recovery and do factory wipe and cache wipe as well. It works as expected so i reboot and once again use the 3 button method to install the update.app on my sdcard. That works as expected and at 100% says its succeeded and reboots. Once again i wait for it to boot to the initial setup wizard but....ALAS...it stays on that DAMN pulsing Honor logo. Ive tried rebooting it several times, redoing the factory wipe and install several times, but nothing. Ive gone into fastboot mode (volume down + power) to try and flash the boot.img and system.img ive extracted from update.app but get the error message -- remote: command failed -- and the same if i try to unlock bootloader. Obviously its not going to work because my bootloader isnt unlocked and nor can i got in to developer settings to enable oem unlock and turn USB debugging on because my phone wont boot past that bloody honor logo. The only thing i havent done yet is to use eRecovery but i dont have broadband and i doesnt seem to work over public wifi! So i will go to my friends tomorrow and use their broadband and hopefullly eRecovery will download/restore the latest firmware. The only other thing i can think of is to download the original nem-l51c432B102 that came with my phone when bought, extract the update.app file and replace the B130 i have on my sdcard dload folder at present.
Sorry for such a long post but i wanted to expalin evrything in detail to hopefully resolve my problem without going backwards and forwards with questions and answers and taking for ever.
So ANYONE and EVERYONE who managed to read the whole post, if you have even the slightest idea of how to get my phone working, please oh please share it with me. Also my phone is still under warranty so if i needed to send it to a huawei centre to get it fixed would they do it and do it for free??? because eseentialy all i did was a factory wipe/reset and install a frmware and it goes KAPUT!! thats not my fault right????!!???
Thank you to one and all for any wisdom you can share. :crying::crying:
Click to expand...
Click to collapse
Can you please edit your post ? Add some space, here and there if you want some help... It is nothing but pain for both eyes and mind to read you.
Onto related topic, did you manage to get your phone back to a functionnal state ? Note that the boot sequence can take time after a wipe so maybe it's not broken at all.
As for eRecovery, it never helped me to restore my device, tried on two different Wi-Fi networks after two completely unrelated issues.
Concerning warranty, I guess it depends on your country and where you bought your phone. I went to the carrier which provided me mine this morning since I ended up with a strong brick last night and I'll get a new phone in a couple of weeks.
Zarou said:
Can you please edit your post ? Add some space, here and there if you want some help... It is nothing but pain for both eyes and mind to read you.
Onto related topic, did you manage to get your phone back to a functionnal state ? Note that the boot sequence can take time after a wipe so maybe it's not broken at all.
As for eRecovery, it never helped me to restore my device, tried on two different Wi-Fi networks after two completely unrelated issues.
Concerning warranty, I guess it depends on your country and where you bought your phone. I went to the carrier which provided me mine this morning since I ended up with a strong brick last night and I'll get a new phone in a couple of weeks.
Click to expand...
Click to collapse
finally a reply! okay so ill edit my post once ive finished replying to you. First off thanks for taking your time to read my post, i am most greatfull. In response to your questions,suggestions i can tell you:
i went to my friends, connected to their broadband and attempted to use eRecovey to update/restore my device. ALAS it did not work! I tried several times and it gets to downloading package from server only to end in a FAIL.. I got home tried connecting to public wifi and doing eRecovery but it just fails. So like you I have never managed to get eRecovery to work.
As for the booting sequence, as i explained before, whether i access stock recovery and wipe cache and wipe phone it does this no problem, reboots, only to get stuck on the honor logo boot animation. The same goes for installing updatte.app with three button method. it says its installed succesfully but does not get past the honor logo boot animation. Unfortunately your suggestion that it might just take a long time to boot is not the case I have left it for hours you see and it never gets to the setup wizard :crying:
As for warranty, i am in uk, bought the phone via amazon, and it was unlocked, so not from a carrier like you. So i guess ill just have to find my nearest huawei service centre and have them look at it.
Does anyone know the procedure as far as doing this. Do i phone them or email my problem and then send my phone to them or what?? Any help is very welcome.
Thanks for your time and patience.
Please, please help...i'm desperate
So sorry for my original long post people, i simply wanted to give as much detail and info as possible because being vague doesnt help anyone. It seems that might have worked against me.
Please,please any suggestions would be appreciated to the N'th degree! I have tried everything i can think of and i am truly desperate now. I dont understand why i cant get it to work...
I can go into stock recovery and wipe the cach and do factory reset and that works fine, no errors.
I can hold the 3 buttons down to install the firmware package(ive got update.app from B130 build) and that works fine, gets to 100% and says 'success' and then reboots, with no errors.
But either way the phone refuses to boot past the honor logo boot animation and ive left it for hours hoping,praying, it will work after the 32nd time...
I can access fastboot but that is useless because my bootloader is not unlocked and i cant get to developer options to enable 'usb debugging' and 'oem unlock'. So i just get error message 'remote: Command Failed' with any command i type.
But thats madness, i cant comprehend why it wont boot because everything seems to work!?!
There has to be a way to get my device functioning again.
I am pulling my hair out, i am at a complete loss, it doesn't make sense. PLEASE ANYONE ..... please help....
Thanks HONOR-able enthusiasts for any help, no matter how small! :good: :fingers-crossed: :angel:
iantechie1979 said:
So sorry for my original long post people, i simply wanted to give as much detail and info as possible because being vague doesnt help anyone. It seems that might have worked against me.
Please,please any suggestions would be appreciated to the N'th degree! I have tried everything i can think of and i am truly desperate now. I dont understand why i cant get it to work...
I can go into stock recovery and wipe the cach and do factory reset and that works fine, no errors.
I can hold the 3 buttons down to install the firmware package(ive got update.app from B130 build) and that works fine, gets to 100% and says 'success' and then reboots, with no errors.
But either way the phone refuses to boot past the honor logo boot animation and ive left it for hours hoping,praying, it will work after the 32nd time...
I can access fastboot but that is useless because my bootloader is not unlocked and i cant get to developer options to enable 'usb debugging' and 'oem unlock'. So i just get error message 'remote: Command Failed' with any command i type.
But thats madness, i cant comprehend why it wont boot because everything seems to work!?!
There has to be a way to get my device functioning again.
I am pulling my hair out, i am at a complete loss, it doesn't make sense. PLEASE ANYONE ..... please help....
Thanks HONOR-able enthusiasts for any help, no matter how small! :good: :fingers-crossed: :angel:
Click to expand...
Click to collapse
How comes you have TWRP with a locked bootloader ?
Zarou said:
How comes you have TWRP with a locked bootloader ?
Click to expand...
Click to collapse
??? hi, I.m sorry, i think you must of misread some of my post. I dont blame you, it was bloody long and confusing!
I only mentioned twrp in the very beggining to run you through the steps to my never ending being stuck on honor logo boot animation. I used TWRP to wipe all partitions and format. From there i used 3 button method to install the update.app(B130) on my sd-card. this was succesfull, no errors and rebooted. I didn't expect any problems. But as i explained it never gets past boot logo.
Obviously now, twrp has gone, i am back to stock recovery and my bootloader is locked.
*I can access stock recovery to wipe cache and wipe the phone no problem and all works with no error messages.
*I can access fastboot(bootloader) but the fastboot commands are useless because my bootloader is locked once again and i cant turn on usb debugging or oem unlock in developper options....because my phone wont boot past honor logo...
*Three button method works everytime, 100% success, no errors, reboots but guess what?? IT WONT GET PAST THAT DAMN HONOR BOOT LOGO!!!!!!!!!
Ive tried everything, but NO LUCK. I came up with this idea today though--- download theB130 rollback from nougat to MarshMallow update.zip. Extract the update.app and put that in my sd-card/dload folder and do 3 button install method.
I might even do the same with the nougat B350 just to cover all bases. So i am downloading now, gonna cross my fingers and any other body parts, pray to all the gods...and hopefully i wont be a crying,sniveling,howling piece of mess by tomorrow.
UNLESS OF COURSE SOMEONE HAS THE KNOWLEDGE I SEEK AND IS WILLING TO SHARE IT :fingers-crossed:
thanks Honor-able friends....
iantechie1979 said:
??? hi, I.m sorry, i think you must of misread some of my post. I dont blame you, it was bloody long and confusing!
I only mentioned twrp in the very beggining to run you through the steps to my never ending being stuck on honor logo boot animation. I used TWRP to wipe all partitions and format. From there i used 3 button method to install the update.app(B130) on my sd-card. this was succesfull, no errors and rebooted. I didn't expect any problems. But as i explained it never gets past boot logo.
Obviously now, twrp has gone, i am back to stock recovery and my bootloader is locked.
*I can access stock recovery to wipe cache and wipe the phone no problem and all works with no error messages.
*I can access fastboot(bootloader) but the fastboot commands are useless because my bootloader is locked once again and i cant turn on usb debugging or oem unlock in developper options....because my phone wont boot past honor logo...
*Three button method works everytime, 100% success, no errors, reboots but guess what?? IT WONT GET PAST THAT DAMN HONOR BOOT LOGO!!!!!!!!!
Ive tried everything, but NO LUCK. I came up with this idea today though--- download theB130 rollback from nougat to MarshMallow update.zip. Extract the update.app and put that in my sd-card/dload folder and do 3 button install method.
I might even do the same with the nougat B350 just to cover all bases. So i am downloading now, gonna cross my fingers and any other body parts, pray to all the gods...and hopefully i wont be a crying,sniveling,howling piece of mess by tomorrow.
UNLESS OF COURSE SOMEONE HAS THE KNOWLEDGE I SEEK AND IS WILLING TO SHARE IT :fingers-crossed:
thanks Honor-able friends....
Click to expand...
Click to collapse
OK, sorry for the misunderstanding. Yeah, try that and if this is still not working, I guess all you can do is try the same with other packages.

Install custom/stock rom with locked bootloader and no access to OS

Hi there,
I got a bricked G5S+, which I reported in another thread already.
It was booting, showing the blue Motorola screen but ended up with a lying down android with a red questionmark and saying 'no command'.
That happened after I rebootet the cellphone for a longer time.
I read through a couple of threads and finally decided, I need to flash stock again.
I did not have switched on USB debugging and so on, as the phone was quite new to me and now cannot access android anymore to do so.
Anyway I thought: fine: I will just flash the stock OS again taking care of the software defect.
After having had some issues I flashed Sanders (SANDERS_NPS26.116-26_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml) following that thread here:
https://animetrick.com/flash-stock-rom-moto-g5s-plus-locked-bootloader-2018/
It is quite similar as this thread, which deals with installing a stock OS to a bootloader-locked phone:
https://forum.xda-developers.com/g5-plus/how-to/solution-to-flash-stock-romfactory-t3691396
The thing is I followed all steps but still get the same error:
A lying down android with a red questionmark and saying 'no command'.
Does anyone have an idea what else to try?
I am not aversed to install a custom Rom, such as the official RR v6.0.0, but I have no idea how to do so with a currently bricked phone.
Maybe you guys have a solution for me to unbrick and finally use my phone again.
Thanks a lot!
Regards from Germany
Matt
Hey bro Im not sure if you still need help but, if so can you try to boot into a recovery?
Hi Carlos,
yes I still need help.
I can boot into recovery. And fastboot runs and detects the phone, too.
Any idea what I can do?
Go ahead and download twrp from the Roms sections and also begin the process to unlock the boot loader, we can see if it still can be done without having enabled the setting in the developer sections, and if so we can either then flash the recovery and a custom rom or install stock again.
Sent from my iDevice running Smoothshake v11.3.1
I solved my problem:
It was the SD card. I cannot believe it.
I got myself another G5S Plus and swapped everything:
Same issue.
So I removed the memory card and all good again.
There is no need anymore to install a custom rom (at least not currently )
I am quite sad though not having figured that out earlier, becoz all my data is lost now....
Thanks for your help though!
I have fallen into same issue, i cannot install any custom rom or recovery to it but i can access fastboot & one recovery that has update via adb sideload / sd card but nothing works, shows failed line 2 error / install aborted .
the device just showing oem locked in fastboot & rom install or recovery install fails & says cause too many links
the phone starts & stucks after the motorola logo
anybody with any idea?

EMERGANCY Issue with flashing a new ROM

Hallo, yesterday my phone kinda got laggy so i thought to my self hmm why not flash a new firmware. Aftewards i said to my self, why not go even further and flash lingeageos 16 and thats when it starts going down. The phone would crash or black screen (volume and power key still work and show their UI on the screen) while the rest of the screen was black. I panicked and quickly wiped everything system,internal storage and all that via TWRP recovery. Now i face a even bigger problem. I cant flash anything onto my phone. The Flashtool requires some drives which i installed as the program instructed but with no great result. I put the device in flash mode by holding volume up key and putting the usb cable into the phone and still nothing i can do. I tried various tools to convert the FTF firmware into zip so i can flash it with TWRP that luckily still works. If i try to flash anything i get the error: 7 or bootloop/stock on loading screen. What should i do?
UPDATE: I flashed a stock rom via newflasher, so for anyone in situation like me, where they phone is a very essential part of they everyday life and everyday responsibilties. Then i recoomend this guid for you, it says everything you need to know when you are in a situation where nothing works: https://www.xperiablog.net/2018/01/...-firmware-for-xperia-xz-premium-xz1-and-more/

Categories

Resources