Hi there,
Froyo 2.2 is out for us Aussies and after upgrading it has been a train wreck for me lagging, apps don't work, and don't get me started on txting, it has got to the point that I don't want to use the phone any more
If the ROM is supplied can a developer make a custom ROM for us Auzzies made from the optus ROM but without the bloatware, optimized, no lag etc. I'm sure alot of us would appreciate it.
The only thing is i applied the 3 button fix.
Model: GT-I9000
Firmware: 2.2
Baseband I9000DTJP3
Kernel: 2.6.32.9
Build: Froyo DTJP5
Any help would be appreciated
Did you do factory reset? Clear cache , dalvich cache etc. Mine was unresponsive till doing this, the upgrade can sometimes be messy to say the least. If you want no bloatware download the unbranded aussie 2.2 from samfirmware.
I am having the same problem and now I am trying to get some kernel update but the problem is that the 3 button is not even fixed in froyo update from optus
they just want to use their crappy software with the phone and get the worst experience of the phone !!!!
but you just said you had the 3 button fixed! which link did you fix from or would please write down the step for it.
thanks mate
Related
Hey guys.
I know this has probably been asked/answered a million times before, but hopefully you can understand me wanting a final confirmation before i risk my £500 phone...I have done a lot of reading around this subject, and and *think* i have my head around the most of it now.
Sorry for the block of text, I have put my actual questions in blue to make them a little easier to spot.
So I have the 16GB Galaxy S from Vodafone UK. It is currently completely stock (not even rooted), and is running the JF3 firmware. The details of the phone are:
PDA: I9000XXJF3
Phone: I9000XXJF3
CSC: I9000VODJE4
The phone is unbranded, and will accept an o2 SIM, so I assume it is SIM unlocked.
I am wanting to try out Froyo on my device, and think the JM8 build is going to be the most appropriate.
Do I need to root/backup anything on my phone first? (I am fine with losing apps etc, and would rather reinstall from scratch anyway).
I have signed up to SamFirmwares, and have downloaded the file GT-I9000_I9000XWJM8_I9000XXJM4_CODE-MODEM, which I believe is the right firmware for my phone and region. I have also downloaded the s1_odin_20100512.pit file, which i *think* is the right one.
I also got the CSC_I9000OXAJM1.tar.md5 file which i think should be the right one. I also have Odin3 v1.3.
Can someone please just confirm these are the correct files for me?
So, all I need to do is:
- Start ODIN.
- Put my phone into download mode.
- Select the Re-Partition box, and make sure Auto Reboot and F. Reset Time are checked.
-Select the CODE file in the PDA box, and the Modem file in the PHONE box.
- Put the CSC_I9000OXAJM1.tar.md5 in the CSC box.
- Press Start.
Am I right to think my phone will now flash?
What are the likely-hood of me bricking/destroying my phone if I follow this procedure?
Again, I'm sorry that you have probably answered these questions a hundred times before, but hopefully you can understand why I want to be sure I'm doing this right .
Before you do anything please check if you CAN access download mode. If you can then its all GOOD! you are spot on and I congrats you on doing your research as many don't. Also PLEASE don't install the Froyo Betas as you can see for yourself (JPH/JP3) that theres ALOT of problems on it especially if you don't know much about flashing. Just wait another week or less for OFFICIAL FROYO as if something does go wrong we can actually get support from Samsung as its OFFICIAL.
Also NO you do not need to root your phone. You can do that if you choose to afterwards with a rom update/custom mod. Or just download the samsung root app from market rooting is very painless.
JM8 is NOT froyo.. It's eclair... (JP# is the currently designated Froyo series, but I suspect the designators may change after it becomes stable to the per-month thing)...
Honestly, at this point of time though, it isn't worth it. Samsung seems to have backported the highmem patch to eclair anyway, and Froyo isn't yet stable. Furthermore, there are reports of people's imei getting corrupted (which is fine if you back up /efs maybe, but it still isn't a safe operation).
Honestly, unless you have a need for the new API's, just wait until it's released (it's expected by the end of the month). And then, to be uber safe, use kies to upgrade.
Although, at this point of time, you should probably upgrade your firmware to a newer version of eclair anyway (using kies), because JF3 is ancient, and plenty of problems were fixed in August.
Thanks for the advice guys. I thought JM8 was a Froyo release. After researching more tonight, it seems the JP releases are less than stable at the minute, so i'll stay away from them and wait for the official release.
I updated my firmware via Kies this morning, and am now running:
PDA: I9000BUJM4
Phone: I9000BUJM3
CSC: I9000GVODJM3
The system seems to be running pretty much the same as before. There is no lag etc and it all runs smooth enough.
The only problem I have is that the software updated has now filled my phone with Vodafone branding. It has the Vodafone start screen, and loads of crappy Voda apps on it.
Is there a way I can remove these? or at least make sure I get a "clean" upgrade with the next software update (would removing the SIM before updating work?
You COULD root your phone and use Titanium Backup to remove the apps you don't want. But in all honesty I say get the latest official rom that your provider has. Be it the old JF3 as when Froyo comes out and you do (fingers cross) get a problem you can get actual support. This moment in time I would recommend you do nothing but go back to JF3 and wait for Froyo. But its your device so upto you
The Kies froyo update was not succesfull. My screen froze and I only
could see the bottom 2 buttons lit. So I had to fix this and I downloaded
some ROM and did a manual download with Odin.
Now I have this.
smallband:
I9000XXJP2
kernel:
2.6.32.9
root(at)sep-52 #1
build:
GT-I9000-eng 2.2 MASTER 332 test-keys.332
I want to have a ORIGINAL firmware. A Samsung original, not a modified something. Did I do the right thing ?
How can I get the original firmware if this isnt. Can somebody please enlighten me. I have read that I can not run certain multiplayer games like the Storm8 ones when I do not have a original ROM.
how about factory unlock? maybe it changes back to original state.. try it out.. I never tried it tough..
This wont work. It is the ROM that has been flashed. So factory settings will only bring it back to the initial state of the flashed ROM.
Therefor I need to flash the phone with the original android 2.1 or 2.1 ROM, from Samsung.
http*://www*.samfirmware.com?
Hi ,
My girlfriend has had her galaxy s for about 4 months i recently flashed darkys rom onto it, with no problems (excellent rom btw), but now the phone has started doing menu and back on its own randomly making it impossible to do anything on it for longer than a few minutes , its like the soft keys are being pressed (but they arent of course).
I've had a google and came to the conclusion its a hardware fault and not software (ive tried factory reset / re-flashing roms/ kernels) but now i have the problem i cant send the phone back to tmobile with a custom firmware so is there anywhere i can download tmobile firmware and stock kernel to make it like when she got it ?
Any help or advice would be greatly appreciated.
In the General chat, there is a link to all the stock roms. Select the one you want and install that one. I am on t mobile in the uk and my code is TMU so that will most likely be fine for you.
By the way - Its exactly what I did last month and they fixed it fine for me with no questions...
CtC
hi thanks for the quick response , ive already installed a stock firmware but when the phone boots up it doesnt do the tmobile logo now, plus the firmware i have installed, i'm not sure if thats ever been available on tmobile , which firmware did you send your phone back to them with if you dont mind me asking ?
Hi,
I used the JP1 stock rom here. I remember now that once I installed the stock one I used the Kies registry hack to put the latest t-mobile firmware on there. Then it was branded T-Mobile again. The only problem is that now kies has been updated the Registry hack may not work.
If I were to send you a nandroid backup of my original T-Mobile rom (I did that when I got a new one!) Would that help?
CtC
I would blame the rom before the hardware and want a wipe to a very clean phone and install a stock rom .
You cannot download TMobile firmware you need somebody to give it to you unless you backed up your original firmware .
The only way to get TMobiles firmware would be to downgrade your phone to stock Eclair then use Kies to update as normal to Froyo branded TMobile or if that failed use the registry patch .
Fix on a non stock rom is going to depend on the guy that picks the phone up and the problem .
jje
"If I were to send you a nandroid backup of my original T-Mobile rom (I did that when I got a new one!) Would that help? "
It would be brilliant if you could do that, how can you send it though ?
@ jjegan i have completely wiped the phone, changed the firmware to 2.1update1 same problem still exists with the soft keys randomly pressing themselves thanks anyway .
can any one give me some advice about making this phone look as stock uk tmobile as possible before i send it back ?
I bought my SGS in the Middle East, particularly in Bahrain. Can someone please help me on how to upgrade my SGS. I already have samsung kies and this is what appears when i connect from keis and try to upgrade my phone:
This version of the device cannot be updated.
current firmware version: PDA:JG8 / PHONE:JG2 / CSC:JG9 (CPW)
OS Eclair 2.1
I really don't know what the problem is. I don't have the android market app, I can't use my video call for skype and yahoo messenger, and this really sucks. I searched for solutions, and i'd really like to try to flash and unroot, but i don't like to brick my phone if something goes wrong, because this is what happened the last time i tried to fix my phone with this method:
1- Backup all your files and apps (after this, the device will be just like new)
2- Set the watch to 24 hours mode
3- Dial this code: *#272*HHMM* (HH for the current Hour MM for the current min)
4- Then chose xsg
I get the market app and it works but my problem is, my simcard isn't working at all; I cant send sms or call, so in short, the network simcard became unavailable. Luckily, i still have warranty, so i returned it to the shop were I bought it, and they can't fix it unless they pay 30$ for the repair, so they just replaced it with a new one.
please help , thanks in advance
This version of the device cannot be updated.
current firmware version: PDA:JG8 / PHONE:JG2 / CSC:JG9 (CPW)
OS Eclair 2.1
Usually means the phones network has not yet upgraded to Froyo .
Alternative is to flash your phone via Odin .
Or rom Kitchin
http://forum.xda-developers.com/showthread.php?t=817703
http://forum.xda-developers.com/showthread.php?t=810686
http://forum.xda-developers.com/showthread.php?t=846913
http://forum.xda-developers.com/showthread.php?t=723596
jje
thanks, i already flash it with odin and im really happy with the result
I suggest tol all other noobs like me, just make a little more research b4 you ask, its already available in the internet,
Hi all,
I'm fairly new to the flashing world and need some guidance.
Current rom:
MODEL NUMBER GT-I9000
FIRMWARE VERSION 2.2.1
BASEBAND VERSION I9000XXJPY
KERNEL 2.6.32.9 root (at) SEP - 51 #1
BUILD NUMBER FROYO .XXJPY
Old Rom:
It was from vodafone, but i can't seem to find exactly what rom it is.
I had a problem with my stock SGS rom and was forced to flash it, but i now have a different rom installed on my SGS, the booting animation (for example) isn't from vodafone anymore.
And KIES doesn't recognize my current rom (for update), so i wanted to know how could i leave everything exactly like it was before. So that i could update to gingerbread the official way and still have a fall back plan.
One last thing, i used odin (v 1.3) to flash it, can i "safely" reverse from 2.2.1 to 2.2 (original from vodafone)? And how?
Thanks again for the help.
I'm very sorry for the long text.
Just use the wonderful & usefull searchbox and find this:
Rom list
Thank you for the reply, i've been on that thread, but still i don't know which is my rom and if the csc will be return to stock.
Thank you again
Sent from my GT-I9000
Stock is not the rom that came with the phone its stock Samsung rom .
You need to have saved your original rom or find somebody that did .
Your Vodaphone upgrade path through Kies will fail as you do not have a Vodaphone rom .
2.2 to 2.1 via Odin with pit 512 and repartition checked .Just use 2.1 rom from samfirmware .
May help .
http://forum.xda-developers.com/showthread.php?p=11963455
jje
Thanks for the fast reply,
Are there any special precautions or guides to revert from 2.2.1 to 2.2?
With the csc. (i've flashed before but i only had one tar file, nothing else).
Sent from my GT-I9000
2.1 revert from 2.2 just flash should be ok problems reflash with pit 512 and repartition checked .
jje
Also dont be to scared of vodafone. If you have a stock Samsung android, instead of the Vodafone, you still have warranty. Only thing that can happen is that when you send your phone in, they'll flash a Vodafone rom back on and you'll be having all the vodafone crap back on it.
Really? That's the best news i've heard, since i had this problem. Thanks a lot, how did you know this?
Regards,
Solid Snake
Sent from my GT-I9000
The terms and conditions do not say you can flash any old rom and not break your warranty .
The position is one with a stock rom you may get away with warranty repairs but it will depend upon who you take it to and even the guy picking up the phone .
Samsung service centre and they may well repair .
Vodaphone service centre and its clear that they do not have too repair as you have broken your terms of warranty with Vodaphone .
So rule one is a back up of your original rom will nearly always be the safest path it also allows you to use the Kies method for official firmware updates if you want to revert back .
jje
Solid_Snake.Pt said:
Really? That's the best news i've heard, since i had this problem. Thanks a lot, how did you know this?
Regards,
Solid Snake
Sent from my GT-I9000
Click to expand...
Click to collapse
Experience: I messed up 2 of my previous phones (SE and HTC) due to flashing firmwares and brought them to T-Mobile and Vodafone, telling them the phone got stuck in boot. They took them in and when I got them back, they had Vodafone and T-mobile firmware on them again.
But as jje stated, its offcourse always the best to have a backup of your phones firmware. Its always possible some annoying Vodafone guy pops up, and makes a big deal out of it.
Thanks for all the input,
I never wanted to flash my sgs, but i screwed up the original rom and the phone didn't boot so it was my last resort.
Due to that i didn't make a backup.
In kies i have my rom as KOR and it says that i can't update, if i that *#272#imei code and put it in XEU, would it work? In theory.
Sent from my GT-I9000
Is there a way to download ROMs from the Kies server so that they can be flashed manually at a later date? I'm thinking that if I need it, I can flash back to the latest H3G branded firmware for warranty purposes.
alexhull24 said:
Is there a way to download ROMs from the Kies server so that they can be flashed manually at a later date? I'm thinking that if I need it, I can flash back to the latest H3G branded firmware for warranty purposes.
Click to expand...
Click to collapse
Their is a post in general regarding Gingerbread JVH and downloading that via FUS . You will need to educate yourself as to how .
jje