Beginner question on Modding Galaxy S - Galaxy S I9000 Q&A, Help & Troubleshooting

Hey Guys. If you want to save time, jump to the bold part :
I'm new to the modding scene and have gone around the forum reading all about Roms, kernels, rooting, etc.
Last week I ordered my first Android phone, the Samsung Galaxy S 8gb from Singapore.
I will be receiving it in about 4 hours. I have been told that it's on stock eclair 2.1, not sure which firmware version.
Since this phone is absolutely new, I am posting this question just to make sure I dont screw it up on the first night (literally).
I want to install custom ROM to the phone, so here's what I have understood I have to do :
1) Perma Root the phone
2) Install Rom Manager from Market
3) Reboot in clockwork recovery, choose update.zip (I have decided to go with the "Ultimate Rom" which is a combination of Doc's and Voodoo's works among others with some added themes.
My question is, is there anything else I need to know ? Do I need to make backup using Rom Manager of my STOCK Rom ?
When I do a "Factory reset", does phone revert to stock Rom ?
Thanks for the awesome work guys.

Related

Couple of Q's before I do a first flash...

After many joyous years of flashing ROM’s onto my HTC TyTN II, I’d quite like to do the same with my Samsung Galaxy S. Before I do though, there are a couple of newbie questions that I haven’t been able to answer via the search facility:
1. Can I back up by existing ‘stock’ ROM before I start? (I’ve checked the stock firmware and mine isn’t on there)
2. Do I need to root the device first, or is this done as part of the flashing process (or not done at all)
3. Are there any downsides from flashing these ROM’s? Other than the potential risk involved, do I lose any features/functionality?
I’ve tested the three button mode and works fine on my device. I think i’m ready to go but just want to clarify I’m not missing anything...
My device info:
PDA: I9000ADJP5
PHONE: I9000ADJP3
CSC: I90002UJP3
Build: 2010.11
Many thanks
Not sure about your first question, but I think it's still possible to fool kies so that you can revert back if you really had too, check on this if it is really important to you.
No need to root first, either flash a stock rom and root later (if you need root) or just flash a custom rom that is already rooted.
No feature loss, other than maybe losing some carrier bloatware. The new JPU rom makes your phone feel like a completely different device. Check out the custom roms in the dev section too.
Fantastic. Thanks for the information. It isn't essential I get the stock ROM backed up really. Just being over cautios?
I was going to start with Darky's v5.2 Gingerbread Edition ROM which looks like a nice change from the Samsung stock experience.
Sick of the lag now - can't wait to see if it does as much for my GalaxyS as the WinMo ROM's did for my TyTN
Don't forget to flash jm8 first. Its like installing a big rom for tytn II to clear unused parts of rom. Read darkys instructions slowly. If anything goes wrong its your fault not the instructions
single finger pecked on a galaxy s

Advice

Good evening,
I usually use Windows Mobile devices so very new to Android, but my girlfriend has recently purchased a Galaxy S from Three. I have tried looking in the FAQ's but there is that much information I am feeling a little confused and dont want to go bricking a £380 phone.
Anyway, the phone has Three's customisation on it and it's not good to put it simply and I am wanting to return the phone to stock ROM or possibly a custom ROM.
The phone is currently running Android 2.2 as it updated when we first got it using the Samsung Klies.
Please can some of you offer advise on where to start with this as I presume I will need a backup of the ROM currently installed.
I've tested the 3 button download mode and that works fine.
Many thanks.
Well with the 3br you can pretty much do anything I would probably flash different kernel which has 2e recovery either speedmod or cf root then install rom manager and from within that app install cwm this enables you to flash custom roms preferably jpy 2.2.1 or just use odin to flash roms that are available from samfirmware again id recommend jpy.
It is worth reading everything you can before you start rather than posting in panic if it goes wrong. You can also break the three button as many have discovered lately to their loss. It is always a risk. So make sure you know wha your doing before you start and remember her warranty will probably be voided by doing any flash.

Samsung Captivate Noob Help!

I updated to froyo 2.2 (leaked version) on my samsung captivate, and I was wondering if there was a possible way to downgrade back to 2.1.
*The only reason im not liking froyo 2.2 at the moment i cant seem to learn our find out how to root it...
Wanted to root to rom a custom rom?
"noobie question"--> if i was to downgrade to 2.2 back to stock 2.1 and root it to have super user, i could then be able to install a custom rom? OR what would other people suggest doing?
Could someone point me in the right way with a link or two maybe, or some suggestions?
bummmpppp! this is all so new to me!
Here's a link to the SuperOneClick to root and enable non-market apps.
And here's a thread for new captivate users.
You might have an easier time finding answers in the Captivate forum.
DiGi760 said:
Here's a link to the SuperOneClick to root and enable non-market apps.
And here's a thread for new captivate users.
You might have an easier time finding answers in the Captivate forum.
Click to expand...
Click to collapse
Thanks so much for these thinks, I can use this SuperOneClick user on my Captivate with froyo 2.2 correct?
I like the froyo 2.2 just couldnt figure out how to get superuser, im trying to install a custom rom on it, never done it before just wanted to try one out and see! New to all this so probably have more questions haha !
Also another noobie question(s).
What does "flashing" mean?
lol
You have to be rooted to have superuser privileges.
Flashing a phone rom is like installing a new OS on a PC. Be careful on doing so and watch some videos and read up on it if you get brave to try flashing custom roms onto your device. Usually ppl use a windows app called Odin to do so. Make sure phone always charged 100% before flashing any new rom also. It could mess up battery stats otherwise and could risk brick if its almost dead then dies LOL. Assuming that's the context of flashing you meant.
Sent from my SGH-T959 using XDA App
try bookmark this page 1st if anything wrong u can recover to original rom.
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Go to this link
http://forum.xda-developers.com/showthread.php?t=884364
It has everything you need to know about installing a custom ROM. Started like you all, found this post and now I have flashed like a 100 times Enjoy!
Mac4Wii said:
Also another noobie question(s).
What does "flashing" mean?
lol
Click to expand...
Click to collapse
Flashing in simple terms means to install a new OS version/Updates/Themes etc on the phone. The most common method found here in XDA is to use something called as Clockwork Recovery Mod.
Seriously, go to this link http://forum.xda-developers.com/showthread.php?t=884364 you will know what you need to do to flash a custom ROM. And may I suggest Firefly 2.1 found here http://forum.xda-developers.com/showthread.php?t=914284 as your first ROM. It is a good ROM. You will enjoy it. There are some other ROMs, if you ask which is the best, clearly there is none, it is purely on preference. Once you have flashed one ROM, and then a few, you will know which one you like.
1. installing a custom rom does not require a rooted phone, you can copy the update.zip to your sdcard and get into recovery, select the custom rom zip file and flash from there.
2. have you flashed a bios on a computer? flash a phone's rom is very similar to that.

[Q] Newcomer to the P1000 Galaxy Tab. Put a 'cube out of his confusion.

Okay. So, I've just acquired a Galaxy Tab off eBay. It's on it's way to me, so I thought I'd burn up a few cycles and go download some goods for flashing as soon as I get it.
The setup: ROM version is Gingerbread. Assume Stock ROM. Model is P1000 (Unlocked GSM).
The question is this. I am completely confused as to what I need to do, and I'd like someone to point me in the right direction. With other devices, I would just root, install custom recovery and voila. Non-stock device. Does this same rule apply with the Galaxy Tab, or is it a new ball game?
Basically, what is the easiest way of getting a custom ROM onto my Galaxy Tab? Do I need to use ODIN and co? Or can I do it all via recovery? Is there any n00b guides that explain installing your first ROM?
I don't want to jump through hurdles that I could have avoided. So, that's why I'm asking you for help. Put me out of my confusion, get a +1 thanks in return. Sounds good, no?
Thanks again. Your help is appreciated.
good day sir.
basically is the same with otherdevices,
root it, install clockworkmod, download and install roms
you will need to flash via odin first because stock rom of gtp1000 have limited options in the recovery mode.
after that, all flashings can be done vie clockworkmod recevery... for your convenience search for these ff. keywords:
overcome kernel
overcome rom
zergrush
cm9 rom
humberos.
no need for thanks buton, i just want to ask you to refrain posting posts in the development forums if you think your post will not contribute to the development, too many assholes there beating each other up and flooding the forum of bullshits.
thanks.
Alright, thanks for the explanation, I appreciate it! Seems to be making sense now...
So, basically, with any ROM I flash, I must use ODIN to flash the kernel? Or will the ROM take care of that? I heard the kernel is mixed in with the recovery system, so I'm a little unsure as to what the go is.
no u just need o flash a kernel with clockworkmod recovery and all succeding flashings be it rom, kernel or anything else canbe done using clockworkmod recovery. of course there are exceptions if the developer specifically requires u to flash via odin
You should follow the Overcome Guide for your first flash, it is comprehensive and easy peasy, lemon squeezy
There are some pics missing in the linked page, I have a cached copy from google that you can refer to also.
GL.
Make back up or the original or current rom
I would like to flash my tab with a custom rom, but I also want to be able to revert or go back to the original rom. My question is how you back up your current or original rom so you could restore it back to its original condition? CMIIW but Titanium back up only back up the apps and stuffs but not the rom, or is it?
ChevanLemon said:
I would like to flash my tab with a custom rom, but I also want to be able to revert or go back to the original rom. My question is how you back up your current or original rom so you could restore it back to its original condition? CMIIW but Titanium back up only back up the apps and stuffs but not the rom, or is it?
Click to expand...
Click to collapse
Please do not hijack my thread. You should make another thread for that - and that's what CWM is used for - making backups!

[Q] So confused. Is there a way or not?

Hi there folks!
Im getting mighty confused about this flashing thing.
Im looking to change my ROM to something else then the ICS from Samsung.
Here is the deal.
I read the warning posts and it say (what i think it means) that my build "XLP9" ICS 4.0.3 from Samsung is not safe to do anything on.
I look around on the net to see if there is a way (despite what i read here).
It looks promising.
But all the things i find is ether a lower version of Android (like 2.3.x) or someone is telling me about tons of stuff to download and do before.
So this is were i ask you all.
Do (been searching for 2 days, perhaps my search terms are bad) anyone know if there is a working way to for me to change my version to AOKP for e.g without destroying my phone?
Like i said before, my Build is: XLP9, android version 4.0.3 (from Samsungs update service).
Phone is rooted using CWM.
Its a Note version for the .EU market bought like a few weeks ago (came with 2.3.x i believe).
If you know a thread that contains step by step instructions that will allow me to change the rom, please post it to me here.
Or if I´m screwed for updating to ICS just tell me so to
Cheers
Honken
Hello again.
Yet another day and cant locate any information that im after.
So i tought perhaps there is a way to downgrade the phone back to the factory settings (not ICS).
But since i did the upgrade to ICS is the old rom still on the phone?
I mean to reset it back (same as thode recovery discs on a computer).
Any help or points in the right direction is helpfull at this time.
cheers
Honken
honken08 said:
Hi there folks!
Im getting mighty confused about this flashing thing.
Im looking to change my ROM to something else then the ICS from Samsung.
Here is the deal.
I read the warning posts and it say (what i think it means) that my build "XLP9" ICS 4.0.3 from Samsung is not safe to do anything on.
I look around on the net to see if there is a way (despite what i read here).
It looks promising.
But all the things i find is ether a lower version of Android (like 2.3.x) or someone is telling me about tons of stuff to download and do before.
So this is were i ask you all.
Do (been searching for 2 days, perhaps my search terms are bad) anyone know if there is a working way to for me to change my version to AOKP for e.g without destroying my phone?
Like i said before, my Build is: XLP9, android version 4.0.3 (from Samsungs update service).
Phone is rooted using CWM.
Its a Note version for the .EU market bought like a few weeks ago (came with 2.3.x i believe).
If you know a thread that contains step by step instructions that will allow me to change the rom, please post it to me here.
Or if I´m screwed for updating to ICS just tell me so to
Cheers
Honken
Click to expand...
Click to collapse
It have too many method to change from stock rom to custom rom or aokp. My suggestion is choose your favourite rom and read carefully with the installation method provided at op, then you be fine.
Sent from my GT-N7000 using xda premium
honken08 said:
Hello again.
Yet another day and cant locate any information that im after.
So i tought perhaps there is a way to downgrade the phone back to the factory settings (not ICS).
But since i did the upgrade to ICS is the old rom still on the phone?
I mean to reset it back (same as thode recovery discs on a computer).
Any help or points in the right direction is helpfull at this time.
cheers
Honken
Click to expand...
Click to collapse
Now that you have upgraded to ICS. Those are the factory settings.
Easiest way to downgrade to GB Is by flashing a stock GB rom via pc Odin.
Most of the new ICS custom ROMs now just require you to install AbyssKernel 4.2, then select advanced options and select reboot recovery. Then you wipe your device (wipe data, cache and dalvik cache). From this moment you're free to flash. It all takes less then a minute if you hurry (joking, don't rush when flashing your phone), and it's not very complicated. Do it once and you'll know it's simple.
You need to have a root access first. Plenty of guides how to do it out there.

Categories

Resources