Related
Hi,
I want to say that everyone is very helpful in this forum and you all rock. I'm having some problems with my rooted samsung captivate. I installed the I9000 Full rom, and it was running fine for a few days then I notice it was very sluggish, so I did a factory restore, but data and apps didn't delete. So I then when in to recovery (R2) and deleted cache and all user data files, then it did a factory restore, and it went in boot up pass the att and samsung S i9000 screen and when to the lock screen, but once I unlock the phone, its just in the black screen, when I click and hold on to the home button it goes to recent, no recnet application and under Task Manager, I have 0 active applications. It won't load any programs or apps. I tried restoring the phone by holding the down volume key and power on button, it goes to R2 recovery and then reinstall package, but it can't find the package. I have it on the memory card, but I guess I deleted it from the internal memory when I did a factory restore. Am I screw, or can someone guide me through this and fix my fone. Thanks in advance. XDA Rules.
Odin one click back to stock, assuming you can get into download mode. Also do a master clear just to be sure. A fresh start might be just what your Captivate needs.
Sent from my SAMSUNG-SGH-I897 using XDA App
The same thing happened to me yesterday. Phone was on, battery fully charged. I got on my flight and left it on (forgot I guess) and when I got off the flight, the screen was black. I'll also add, that over the past 3 days the phone was starting to get extremely sluggish (for no reason that I can think of). But back to the rest of the story...
I couldn't get it to turn on, so I pulled the battery and tried again. This time I got the AT&T logo and the Samsung animation. Once the animation was completed the screen goes black.
The phone is still on. How do I know? If I touch any of the bottom buttons they light up.... and stay lit up until I do a battery pull.
Deleted/cleared everything, same behaviour.
I tried reflashing JI6, it works but fails to reinstall the packages, otherwise same behaviour.
I tried reflashing JF6, same behaviour.
The flashes always succeed, but always end up in failure.
Now for the interesting part. I went into recovery mode on JI6. I try to format the internal /sdcard, I get a message that it cannot mount /sdcard /dev... not found.
So to recap, phone not working, recovery mode available, download mode available. adb doesn't seem to be working, but if someone can tell me how to access the phone with "adb shell" while in recovery mode, I might be able to diagnose why /dev... is not mounting... Or at least how I could fix it using adb.
Any help would be appreciated. I'm traveling and needless to say, this is a huge inconvenience, I'm lucky I had my backup phone to at least be able to get online and be able to make calls.
HI,
thanks for quick response. I can get to the recovery mode, where the android holding the shovel. But when I load Odin one click, it don't seem to detect and do anything. o success 0 failed. I installed the samsung captivate windows 7 drivers, the funny thing is when I plug my brink phone in the usb port, it say unrecongize usb. Any other suggestions. Thanks
hksmr2 said:
HI,
thanks for quick response. I can get to the recovery mode, where the android holding the shovel. But when I load Odin one click, it don't seem to detect and do anything. o success 0 failed. I installed the samsung captivate windows 7 drivers, the funny thing is when I plug my brink phone in the usb port, it say unrecongize usb. Any other suggestions. Thanks
Click to expand...
Click to collapse
the shovel is NOT recovery mode, it is download mode.
have ODIN running BEFORE you get your phone in download mode
Hi,
I've flashed multiple times before without an issue until today.
First, here's my background information:
Samsung Captivate (ATT)
Was running Continuum 5.4.1 but it felt laggy so I attempted to flash MIUI 1.5.13.
Here's what I did:
I wiped my phone using the Odin One click tool, then flashed CM7's kernel and then performed formats of the cache, system, and data, then installed MIUI RC2. After this step the phone should have restarted, then I planned to shut it down and reboot into recovery and flash 1.5.13 onto it.
My problem(s):
-Boot into recovery/download mode using key combinations is not working.
-The ADB console reports device not found when I try to run adb shell.
-The phone is undetected in Droidexplorer.
-When I attempt to download an app to boot to recovery with the phone says there is no space even though nothing has been installed other then MIUI.
What I would like to do:
Get back to stock with download/recovery modes working.
On a side note: MIUI works, but in a very limited way. I can navigate through it, but it won't allow the installation of applications due to there not being room on the phone (as said before).
Thanks!
Update - my phone was being identified as a Nexus S, so without those drivers my phone could not be debugged via USB. I now have the drivers and can perform ADB commands, however rebooting into recovery and into download mode both result in the phone restarting without going to the download or recovery mode.
Try using ODIN and repartitioning. I have good videos on standard ODIN and Heimdall on YouTube just search them. If you can not get out of this contact me, I have been able to partition debrick in the past and it's actually considered by me far more annoying than standard bootloader JTAG in certain situations. Let's hope yours is easier to bail out of!
First of all thanks for the reply and direction.
Secondly:
After working on this all last night I was able to get the phone recognized by Odin and my computer, now I am stuck at one of two screens depending on what I do.
If the phone is powered off then plugged in, the battery charging screen appears but there is no animation and after unplugging it the battery charging image remains.
If I power the phone on it hangs on the Samsung boot screen.
Repartitioning does sound like the proper direction for me to take, but, when I use Odin it freezes while setting up the connection to the phone.
when the phone is powered off try holding both vol keys and plugging in the cable. That could possibly get you to download mode. If not try vol down/pwr at the same time since you are now on GB bootloaders the keys are a bit different. Let me know what happens and good luck
maybe you should try to build a jig and use it to get into the download mode first. or you can buy it on ebay, just search for "micro usb jig".
I've tried every volume and power combination possible to no avail, I can't get into download mode. I've given in and am exchanging my phone. Thanks for the help anyway guys!
Hey guys, I'm having an annoying problem here.
When I try to connect my phone to a computer, it just goes straight to charging, it doesn't even recognize on either end that a USB is connected to a computer. Now, sometimes I can force it to work, but that is like around 200 tries and it finally connects. I suspect it might be in test mode (but I'm not sure, I tried pressing # on the dialer to see if it pops up but nothing shows), so I've tried to follow the instructions to flash a .tot file by pressing power + volume up, unfortunately, the computer still doesn't recognize anything is connected, and neither does LGNPST. I have all the drivers properly installed (I was able to successfully downgrade to zv7/install gingervolt last week), and am out of ideas on how to get it to work. Any help would be appreciated.
So far I've tried about 6 different cables in four different USB ports to no success.
pow + vol down (hard reset) should work, phone has to be completely off. not even the charging animation. unplug from pc, pull and replace batt, put batt in then plug into usb then hard reset (hold until factory reset pops up) 10 secs or so
this has allways worked for me no matter how badly i messed up the phone.
Well, I tried your method of a hard reset and it still didn't work. Any other ideas? Is there any way to make the computer force to recognize the phone when its in emergency download mode?
I'm having a similar issue on a friend's phone
Edit: http://forum.xda-developers.com/showthread.php?t=1564941 I think this is the solution
I followed the instructions exactly, and LGNPST still isn't noticing anything and won't go into emergency mode......this is frustrating me....if I can just get this thing back to stock and lose cwm i can just take it to the store and get a new one.....
*EDIT* Well it randomly decided to connect to my computer again. The problem now is as soon as it goes into download mode(LGNPST is at around 11% complete and about to start on the Masterbin), it loses the connection to the computer and can't finish flashing the tot file....ugh..
Anyone have any ideas? I'm going crazy over here trying to figure out whats wrong. Every like 100th try, it will connect to the computer still, but if I try and run mt's revoallinone package it fails to unroot (says access is denied or folder not found), or try lgnpst it loses the usb connection the second it goes to that download screen.
Depending on what version your on or where your at as far as root stock etc this may or may not work i am at a loss, try this http://forum.xda-developers.com/showthread.php?t=1626198
Yeah I've tried that. On the occassion that the COM port reveals which port is the phone(usually on the 100th time of reconnecting the usb cord and successfully able to go into usb debug) I run that program, only for it to state that this is not a lg revo and auto close before I can get all the log data. Its frustrating...I only started to have this problem when I installed GingerVolt.....
Will adb recognize your device, because i had the same issue on a newer revo, you say your on gingervolt then you should be able to set up root acces and push cwm through adb then boot to cwm and flash sonething anything a recovery or do a wipe from there and i believe i saw a method in the forums for installing a stock os fron a zip. All depending on usb connection though
I have cwm already on there. I want it and the root off and back to stock, but I can never flash a tot and unfortunately I have no experience with adb, but I guess I'll google instructions to unroot via that and see if I can go back to stock via it as well.
Hello All,
Hoping someone will be able to assist me, though I'm starting to lose hope.
I have spent all day so far reading threads, and trying various suggestions and fixes, but nothing has really helped and I'm beginning to think the phone may just be kaput.
Initial issue was nothing out of the ordinary; woke up to find the phone was not responding so pulled the battery. After putting the battery back in, the phone would no longer turn on. Uh oh. Did the obvious, repull the battery, try again. Nothing. Connect to charger (nothing happens, no charging icon on screen). At this point I think the battery has died so I bought a new one. No change, phone still won't turn on and nothing happens when I plug it in to charge.
So now I connect it to my PC, and I get the installing hardware message trying to install the APX stuff which fails. After some research, I manage to get the APX drivers installed such that the phone is detected when I plug it in. More research, decide to try the AOI Toolkit to backup everything first. This works ok.
So now I try and enter recovery mode via Power key + Volume Down key. Nothing. Ok, change the recovery image then. Device is not detected via ADB method. NVFlash method instead then. The bootloader loads fine, the screen wakes up and shows the S/W Download... message. I figure this is a hopeful sign. I try all 3 (ics-cwm-5, ics-cwm-6, twrp-2.5). They all flash successfully. However, I can't enter recovery mode with any of them. Once I disconnect the phone, insert the battery and then hold down the Power + Volume Down buttons, nothing ever happens.
I've also tried the LG Update Tool and the Smartflash options, but the phone is never detected.
As a last resort I repartitioned. This also worked ok, but still no recovery mode.
tl;dr
Phone won't turn on, show as charging, or enter recovery mode. Works when connected as APX with AOI Toolkit.
Am I missing something? Doing something wrong? Any assistance is greatly appreciated. Thx.
Bump
Okay, I'm bumping this thread myself (mostly because I'm an idiot and this could happen to me, too), but to give you my two cents: Have you tried the Full Brick Repair tool? You flash it through NVFlash and apparently "it cures any brick". Try it and tell us how it went.
NoDze said:
Okay, I'm bumping this thread myself (mostly because I'm an idiot and this could happen to me, too), but to give you my two cents: Have you tried the Full Brick Repair tool? You flash it through NVFlash and apparently "it cures any brick". Try it and tell us how it went.
Click to expand...
Click to collapse
Thanks for the suggestion. The flash process itself completed without issue, but still nothing once the battery is inserted and the power button is pressed. I'm going to assume there is some sort of hardware issue at this point and consider the phone officially dead. Now, where's my hammer...?
xda_fanboy said:
Thanks for the suggestion. The flash process itself completed without issue, but still nothing once the battery is inserted and the power button is pressed. I'm going to assume there is some sort of hardware issue at this point and consider the phone officially dead. Now, where's my hammer...?
Click to expand...
Click to collapse
Don't give up yet. Try smartflash and flash stock, or whatever. Seriously. Just keep on trying. I had a Samsung Captivate a year back and something similar happened where I woke up one beautiful morning, tried to unlock my phone: no response. I thought I had an SOD, so I pulled the battery out, reinserted: bootloop. Entered recovery, can't flash anything, unable to mount system/data partitions. Turns out my internal memory/ROM got fried. Yay. But until then, I tried every possible option. Wow, this turned out to be a bit depressing. Just try more stuff. After you've tried everything, and I mean everything, declare the phone dead.
I think i have a similar problem. Just woke up to find my phone to be dead. Tried the usual methods, nothing. Best it could do was from time to time show me a battery sign with a red triangle and a whtie exclamation mark in it. Then sometimes i manage to get into the recovery mode, there i tried practically everything. Used restore, it shows that restore was a success, but when i reboot my phone i get into an endless circle of bootloader icon appearing and dissappearing,
EDIT: somehow from the countless attempt it fired up.
Make sure to have the right bootloader before nvflashing unbrick roms....
xda_fanboy said:
Hello All,
Hoping someone will be able to assist me, though I'm starting to lose hope.
I have spent all day so far reading threads, and trying various suggestions and fixes, but nothing has really helped and I'm beginning to think the phone may just be kaput.
Initial issue was nothing out of the ordinary; woke up to find the phone was not responding so pulled the battery. After putting the battery back in, the phone would no longer turn on. Uh oh. Did the obvious, repull the battery, try again. Nothing. Connect to charger (nothing happens, no charging icon on screen). At this point I think the battery has died so I bought a new one. No change, phone still won't turn on and nothing happens when I plug it in to charge.
So now I connect it to my PC, and I get the installing hardware message trying to install the APX stuff which fails. After some research, I manage to get the APX drivers installed such that the phone is detected when I plug it in. More research, decide to try the AOI Toolkit to backup everything first. This works ok.
So now I try and enter recovery mode via Power key + Volume Down key. Nothing. Ok, change the recovery image then. Device is not detected via ADB method. NVFlash method instead then. The bootloader loads fine, the screen wakes up and shows the S/W Download... message. I figure this is a hopeful sign. I try all 3 (ics-cwm-5, ics-cwm-6, twrp-2.5). They all flash successfully. However, I can't enter recovery mode with any of them. Once I disconnect the phone, insert the battery and then hold down the Power + Volume Down buttons, nothing ever happens.
I've also tried the LG Update Tool and the Smartflash options, but the phone is never detected.
As a last resort I repartitioned. This also worked ok, but still no recovery mode.
tl;dr
Phone won't turn on, show as charging, or enter recovery mode. Works when connected as APX with AOI Toolkit.
Am I missing something? Doing something wrong? Any assistance is greatly appreciated. Thx.
Click to expand...
Click to collapse
Try to flash a new recovery image in apx mode.
And edit the /dev/block/mmcblk0p3 partition your self.
seek=6144 count=75 bs=1 / boot-recovery
Thanks for the added input and encouragement folks.
Just reporting an update:
Having been unsuccessful more times than I could count, I decided to physically disassemble the phone (normally Engineering fix #2, but performed out of order on this occasion). I have zero idea why it should have made a difference, as all I did was take it apart and then put it back together, but the phone has groaned back to life.
Of course, then sausage-fingers here managed to tear the digitizer cable when doing the final reassambly... /facepalm
Anyhow, I have a replacement on order, so I'm hopeful that when I receive that in a few days I'm back to a fully functional Optimus 2x!!
Greetings,
My internal sd card died slowly over time. It failed to mount on some occasions at first. After a few weeks I had massive app crashes.
Everything I did on the phone (installing apps, deleting files, even doing a factory reset) seemed to revert back after rebooting the phone. I mean I delete some files, and after reboot, the files came back from the dead. Same thing for factory reset.
Installing other roms made the situation even worse, and I had to revert back to stock 2.3 rom.
And since last week, the phone is on permanent bootloop. It won't go into download or recovery mode (it used to activate those modes with 3 button combo before).
I tried the USB JIG method. Built a 301k resistor, connected pins to the usb thingie. It did power the phone on, but failed to trigger the download mode. The phone still goes into a boot loop.
Anyone has any ideas? I don't know what more information I can provide about the issue.
Regards,
No download mode?
If your phone won’t enter download mode, you can try three things:
A USB jig. Don’t pin your hopes on this, they rarely succeed in this scenario.
‘Jump starting’ – You might need someone else to give you a hand for this. Take the battery out of your phone and wait 30 seconds. Now, press the button combination to enter download mode, and with this combination still depressed, get someone to put the battery back in. Hopefully this will jolt your phone into download mode.
Take out the phone battery, and re-insert it, but don’t turn the phone on. Now, plug in the charger while holding the volume down button. Keep holding volume down till you enter download mode.
If your phone won’t enter download mode, and will do nothing but get hot when you attempt to do anything to it (charge it, turn it on), then your motherboard is in need of replacement.
Your options
I’ve seen a lot of people, when their Odin flash fails, either:
Give up. Not a good option.
Flash a .pit file. That should be used as an absolute last resort. There’s a lot to try before getting to that stage! If a flash of a .pit file fails in Odin, your phone is well and truly unrecoverable, and you will need a motherboard (MB) replacement.
Quoted from a quite by Hopper8, try these steps. Can't really do anything since recovery/download mode is dead. If you can get into download mode, flash a .pit file (get all the files ready beforehand). Be quick, since you don't know when your device will die again.
N7105 rocking AOSB with AGNi kernel,
Click "Thanks" if I was of any help!
FraggyDav said:
Greetings,
My internal sd card died slowly over time. It failed to mount on some occasions at first. After a few weeks I had massive app crashes.
Everything I did on the phone (installing apps, deleting files, even doing a factory reset) seemed to revert back after rebooting the phone. I mean I delete some files, and after reboot, the files came back from the dead. Same thing for factory reset.
Installing other roms made the situation even worse, and I had to revert back to stock 2.3 rom.
And since last week, the phone is on permanent bootloop. It won't go into download or recovery mode (it used to activate those modes with 3 button combo before).
I tried the USB JIG method. Built a 301k resistor, connected pins to the usb thingie. It did power the phone on, but failed to trigger the download mode. The phone still goes into a boot loop.
Anyone has any ideas? I don't know what more information I can provide about the issue.
Regards,
Click to expand...
Click to collapse
My little sister had the same problem.
But now the phone is complete dead.
Not booting after bootloop.
No customroms ever installed.