Database Develop

[Q] Anyone successfully using OpenVPN on the Fascinate?

I just can't get OpenVPN to work on the Fascinate. I think I'm getting close. I finally found a tun.ko driver that works, and I can connect to my VPN at home, but it looks like the route is not being pushed because I can't access any IP on the VPN.. even though I am connected.
I've got Busybox, OpenVPN installer and OpenVPN Settings apps installed right from the market.
Is there any way to enable logging of OpenVPN on the phone? I can't seem to figure that out either. A log might at least give me a clue what is wrong.
Help is much appreciated.
Karl

Can you post a link to your tun.ko file?

Got OpenVPN working!
I believe I'm using the tun.ko posted here:
http://forum.xda-developers.com/showthread.php?t=871681
I had found this early on. But what really stumped me for a week was the inabilitly of OpenVPN to push routes properly to the phone. There are several suggestions out there about linking route and ifconfig in the system/xbin, playing with the busybox install paths, etc. None of that helped me. What did help was actually replacing the Market version of OpenVPN apk with the one found in this thread:
http://forum.xda-developers.com/showthread.php?t=820909
Apparently some gracious person has re-compiled OpenVPN to work properly on Galaxy phones and correctly push out the routes.
I'm posting this in case it helps others.
Karl

[Q] Can anyone connet thru proxy with latest Dalingrin Kernel?

recently i installed the last eclair kernel from Dalingrin (2/25/11), which among other great things, implements netfilter/iptables
i was able to install both TransProxy and AsProxy, but since i need ntlm authentication to connect to the internet in my office, only AsProxy would be useful for me, but when i hit the start button, it says that the iptables were not found.
has anyone been able to connect to the internet thru a proxy server (in my case an ISA Server), with any of the above mentioned programs or another one?

Have you gotten your iptables to show up yet?
I havent gone the route of ROM yet but I probably will have too. I have asproxy and Orbot (TOR client) installed but without iptables they are useless.

wrenchneck said:
Have you gotten your iptables to show up yet?
I havent gone the route of ROM yet but I probably will have too. I have asproxy and Orbot (TOR client) installed but without iptables they are useless.
Click to expand...
Click to collapse
I have the same issue too. Peharps Dal could compile the Kernet to support iptables.

What I had to do for this is set up OpenVPN... Violates my work policy, but oh well. Couldn't figure out how to get it set up any other way.
Technically I did set up an access point on a CentOS box with a transparent proxy, but that doesn't handle syncing which I need at work as I use my tablet during meetings and need to have my schedule up to date etc..

Did you heard about Honeycomb 3.1? Now you can set up proxy and user/psw on the wifi configuration. Nice.. It should be very nice if CM7 got this too...

[Q] Is there a cifs.ko for the streak 7? Or something?

Trying to get this cifs manager to work on my streak 7, But I do not think that this rooted stuff has a cifs ability in its kernal. Anyone with abit more info know how to guide me into getting a correct cifs.ko up here for this?

Anyone have any info? Just wanna get the network sharing going. =) Play my videos over a network etc.

Bump, Was wondering if anyone has had any lucky on any method for network accessing files?

Noone's compiled one for stock 5xx roms, you might be able to bug DJ_Steve to add it into ICS if it's not already in. But keep in mind ICS is still very unstable.
I do believe someone's compiled one for 336, possible DJ_Steve as part of Streakdroid7 when it was based on 336.

Yea, I think steve did do one for the 2.2 but of course... after being on honeycomb.. I would HATE to downgrade again.

Hey is anyone who knows how, able to compile the kernel or least make the cifs.ko for us on honeycomb streak 7? Since cifs manager can load the file anywhere, would be nice to just have that file. I looked into it some, but really, not sure how exactly to go about it. Reading some about it, saying have to install a certain ubuntu version and go from there. Alot of work it seems. Would be willing to pay 5$ via paypal if you get a working cifs.ko for HC Streak 7 for me. =)

Going to try to get it included with the next ICS build but its not a priority.

Cool that its in ICS. (Now once radios work on it.. so I have my 4g and wifi working. Id be happy to install ics lol)
Offer stands for Honeycomb cifs.ko, willing to pay up to 10$ for a working file to use for cifs manager. Would love to put this on my dock and load up network videos on the side while playing my MMOs. =D

[Guide] Installing Arch Linux (updated 11/4/2013) bluetooth+KDE

I've began to write up a guide for getting Arch usable on the Nexus 7. I just threw it up on google docs because I'm too lazy to try to do the wiki thing until it's more complete. Hopefully it is far enough along to get things rolling for people who are looking to experiment with arch.
Anyway, it's a work in progress, if anyone has suggestions, correction, completions, criticisms, etc then holler.
Linkies

Changelog
========
2013-07-20
--Added instructions for installing the platform tools on an arch host pc
--Added references to wicd and network manager as alternatives to netctl
2013-10-20
--Updated instructions to reflect new *-grouper.zip naming scheme for MultiROM files
--Added instructions for updating the kernel to include kexec
--Got bluetooth 90% working. Interface comes up and can find devices with scan. Can’t get it to pair yet though.
2013-10-24
--Got the bluetooth device to power up on boot by adding a udev rule. Unfortunately the bluetooth daemon seems to be failing as it starts.
2013-10-28
--My keyboard is pairing on boot now. Ugly ugly things to get it working, but it works.
2013-11-03
--Updated the guide to get X working.
2013-11-04
--Tweaked xorg.conf files to get kde and e17 working.
--Added instructions to get Touchégg working to provide more tablety experience

Todo/Bugs
Problems/Bugs/Todo
The following is a list of things that need to be addressed or that I want to address. These things will be tackled in no particular order but hopefully over time the number bugs and problems will go down relative to the number of features I want to add.
Feel free to comment with your own ideas or bug reports.
Fix slow shutdowns after enabling networking with netctl
Fix whatever extremely verbose crash shows up on shutdown after setting up bluetooth
Get bluetooth working without hacks and under bluez5
Get a graphical login working
On screen keyboard (especially at login screen)
Set up an aur and/or googlecode project to automate some of the scripting required to get things working
Automate the process with some kind of setup tool
Replace the google doc with a wiki page in a relevant place
Make a custom spin that works more out of the box
Sound
GPS
Accelerometer
Magnetometer
Hardware buttons
Any other sensors that I forgot or am unaware of
Auto screen rotation

For the section on setting up fastboot and adb...it's safe to assume someone installing arch on the nex7 probably has arch on their pc too. For arch, you need to set up access to the AUR, with a package manager that has access to it, i.e. yaourt. Then you can get android-sdk-platform-tools. The rest of the guide looks good. I personally like wicd for my network manager as it is easier to add and remove networks when you go to new locations, and I installed e17(enlightenment desktop).

joeG78 said:
For the section on setting up fastboot and adb...it's safe to assume someone installing arch on the nex7 probably has arch on their pc too. For arch, you need to set up access to the AUR, with a package manager that has access to it, i.e. yaourt. Then you can get android-sdk-platform-tools. The rest of the guide looks good. I personally like wicd for my network manager as it is easier to add and remove networks when you go to new locations, and I installed e17(enlightenment desktop).
Click to expand...
Click to collapse
Thanks for the feedback
I don't have arch on my pc at the moment, so it's not a given, but i think you are right that people are probably more likely to have arch if they are looking at this guide. I updated the guide with info on how to install the tools from AUR. Also added links to wicd and Network Manager in the arch wiki so people are aware of some options if they don't like netctl, and mentioned that e17 works.

Xorg with alarm on nexus 7
Okay, got ALarm installed on my nexus 7 8GB.
For Xorg, I used files from "plasma active" nexus 7 distribution.
Just take them from the plasma active and put them into your /etc/X11 and X should work.
(I can't post a link, must wait 10 posts, I'll link the files later or you can PM me)
My only problem now is to put a cross-compile toolchain on my computer to be able to compile e17 with illume modules. Tried to compile on my tablet but it's too slow and I've not enough disk free to finish. If anybody can help on this point…

What distribution are you using on your PC? Also you can pm me the link for the xorg configuration and I'll post it for you

OK so I have come as far as installing multirom and I installed the archlinux rom and got this error when I tried to boot it
"kexec-hardboot support required to boot this kernel"
How do I resolve this?

thecrimsonfukr said:
OK so I have come as far as installing multirom and I installed the archlinux rom and got this error when I tried to boot it
"kexec-hardboot support required to boot this kernel"
How do I resolve this?
Click to expand...
Click to collapse
Go back and reread the multirom thread, then install a kexec-hardboot patched kernel in your internal rom.
Sent from my SGH-T679 using xda premium

joeG78 said:
Go back and reread the multirom thread, then install a kexec-hardboot patched kernel in your internal rom.
Sent from my SGH-T679 using xda premium
Click to expand...
Click to collapse
Thank you! I didnt realize it was that simple... for some reason i find the original multirom post difficult to follow.

thecrimsonfukr said:
Thank you! I didnt realize it was that simple... for some reason i find the original multirom post difficult to follow.
Click to expand...
Click to collapse
Hello
i want install arch linux on nexus 7 , but i confuse about it . is arch linux on nexus 7 fast and stable ?
can i watch hd video in arch linux withot lag ? before days i install ubuntu desktop on N7 but when i open video HD ( not full) with vlc , it somtimes play withot sound and it have lag . unity is heavy for nexus 7 , i want install arch + lxde . is it fater ?
sorry for english .

For me Arch works without any problems but when I type startx xserver freezes after the first image of xfce or e17.
Has anybody a solution?

? How to install e17 ?
joeG78 said:
For the section on setting up fastboot and adb...it's safe to assume someone installing arch on the nex7 probably has arch on their pc too. For arch, you need to set up access to the AUR, with a package manager that has access to it, i.e. yaourt. Then you can get android-sdk-platform-tools. The rest of the guide looks good. I personally like wicd for my network manager as it is easier to add and remove networks when you go to new locations, and I installed e17(enlightenment desktop).
Click to expand...
Click to collapse
e17 is the fast
so , i want to installing to my nexus 7
thanks .

Why ? my bluetooth not work?
not find the device ????

ylixir said:
I've began to write up a guide for getting Arch usable on the Nexus 7. I just threw it up on google docs because I'm too lazy to try to do the wiki thing until it's more complete. Hopefully it is far enough along to get things rolling for people who are looking to experiment with arch.
Anyway, it's a work in progress, if anyone has suggestions, correction, completions, criticisms, etc then holler.
My bluetooth not working
cannot find the device ??
Nexus 7 32GB Wifi
Click to expand...
Click to collapse

bluetooth
I have bluetooth (almost) working. I've put instructions in the guide. They aren't really a final solution, but maybe people who are running gui's can tell me if they work. I know I have the hardware working because I can see my keyboard when I scan for it, but I can't figure out how to get bluez5 to pair from the command line. Hopefully someone has better luck with a gui?

bluetooth
I've got Bluetooth working. I even have it pairing automatically on boot with a keyboard. Its an ugly solution but it works. The guide has been updated. I'll tackle X next

My Arch Install
Hey just wanted to add my install experience to the thread hopefully to help others. First of all I want say thanks for all documentation from the previous posters. I tried to follow the instructions as close as possible for a kde install, but I ran into some trouble with lightdm, so I tried kdm instead. And I can happily report it has worked swimmingly. Instructions on how to setup kdm, navigate to /usr/share/config/kdm. First edit the kdmrc to turn off the themed greeter. Then add the xvkbd to the XSetup file as in the lightdm setup. Another thing I did was utilize the plasmaboard widget on my main kde panel for my on screen keyboard once I log in. It seems to work much better than xvkbd for me. I can also confirm flash is working great.
So this really close to totally replacing my linux laptop, especially when I am on the go, in fact I am writing this post on the device in arch. However one key piece is still missing for me is sound. I can't seem to coax any sound out the device with my arch install, and amarok crashes on startup, even though both these items were working perfectly in ubuntu. If any one has any ideas how to make audio and amarok work I would be immensely grateful. Also thanks again, I am so happy to be rid of the X11 touch race condition. I have added a screenshot of me editing this post for those interested as well.

Figured out sound!
I think i found a solution to all of my troubles from my previous post. Amarok started working after a pacman update. My general audio problems seem to be caused by the linux for tegra audio drivers lack of head phone jack detection, I found a workaround the ubuntu nexus 7 launchpad bug tracker: https://bugs.launchpad.net/ubuntu-nexus7/+bug/1068804/comments/24. For the tldr crowd basically you have to use alsamixer manually mute and unmute the int_spkr channel for speaker audio and the int_mic channel to enable headphones. Then you can use the output and and hp to channels adjust volume for speaker and headphones respectively. It also might help to do a suspend resume cycle i sound still isn't working. Thanks to everyone else, hopefully others will find this useful as well.

Many thanks for your work!!! I'm using it on a nexus 7 with glass and touch broken (unuseless) but now it lives!!! and is a very responsive lxde desktop with xrdp starting on boot which I use with amule or bittorrent all night long...
two questions:
1) for me it does not work shutdown -r now or reboot... it close immediately all network connections but I have to keep power button 10 sec to restart system...
2) using it with an hub usb I'm trying to connect a big hard disk: pcmanfm (lxde file manager) refuse to mount it saying than it is not authorized... (I've followed archlinux wiki: it work on my archlinux desktop but not in nexus 7).

I need working ssh client

Hi
My phone lumia 930 so windows 8.1
I have seen on US market is Putty, unfortunately cannot download it because stay in uk
I tried to change region for US in phone but doesn't work
Anyone have idea how to install apps from other country app store or know working ssh client which will connect with my qnap nas server?

There's lots of WP SSH clients. I haven't tested them all on 8.1, but they should work. Have you considered just checking the store for "ssh"?
The one I use is called "The SSH Client". The free version works quite well, although there's a paid version with more features.

Yeah, there is few of them and some working but in lan only.
If I'm trying get connected from outside my lan will revive only : This port is not supported by ssh.
Port is properly redirected but different as standard.
Any way it shouldn't be a problem I have putty on my windows rt and connecting without any problems.

wojtas29 said:
Yeah, there is few of them and some working but in lan only.
If I'm trying get connected from outside my lan will revive only : This port is not supported by ssh.
Port is properly redirected but different as standard.
Any way it shouldn't be a problem I have putty on my windows rt and connecting without any problems.
Click to expand...
Click to collapse
Well if you're familiar with SSH then you must of heard about PUTTY , so i'm happy to inform you that there is a working WP8 version of PUTTY, for now it's in closed beta, but you can be part of it, just be sure to drop the developer an email( the default MS account on the device ) for beta access at [email protected]
Can confirm eventhou it's still in beta it's working like a charm.
PROOF : PUTTY

Any decent SSH client, including the one I recommended, supports custom ports... but hey, that PuTTY looks pretty good too!

GoodDayToDie said:
Any decent SSH client, including the one I recommended, supports custom ports... but hey, that PuTTY looks pretty good too!
Click to expand...
Click to collapse
Well it's more than an ssh client, it supports also raw, telnet and rlogin connection types.

VSparxx said:
Well it's more than an ssh client, it supports also raw, telnet and rlogin connection types.
Click to expand...
Click to collapse
Indeed it is. I'm the developer behind the PuTTY port, glad to see it getting some love. Tunnelling is supported in the latest version but still has a few bugs to iron out and I am also working on support for serial over bluetooth too

noggin182 said:
Indeed it is. I'm the developer behind the PuTTY port, glad to see it getting some love. Tunnelling is supported in the latest version but still has a few bugs to iron out and I am also working on support for serial over bluetooth too
Click to expand...
Click to collapse
Hi...great to see some input from the dev., I'm an system admin and rely heavily on your app. so thank you for bringing this awesome tool to WP.
Also maybe it's time to make the app public, as I don't have any problems with it, so general everyone should be fine with it.
Many thanks again.

VSparxx said:
Also maybe it's time to make the app public, as I don't have any problems with it, so general everyone should be fine with it.
Click to expand...
Click to collapse
Yup, there are a few things that need sorting out. For some people it occasionally crashes when they connect and it's related to loading the sound files used for the system beep and the keyboard clicks. I've not been able to get to the bottom of that yet but the next minor update has some improved crash reporting which should help.
There is also a few people experiencing some problems whilst tunnelling.
I can't reproduce either of this bugs though in the emulator or any of my phones. Once they're sorted though I should be taking it public

noggin182 said:
Yup, there are a few things that need sorting out. For some people it occasionally crashes when they connect and it's related to loading the sound files used for the system beep and the keyboard clicks. I've not been able to get to the bottom of that yet but the next minor update has some improved crash reporting which should help.
There is also a few people experiencing some problems whilst tunnelling.
I can't reproduce either of this bugs though in the emulator or any of my phones. Once they're sorted though I should be taking it public
Click to expand...
Click to collapse
Neither of those affected me, maybe poor net signal is the culprit of tunnelling errors.

Can I really view internal system files using SHSH client on WP? I own Lumia 920.

No, you would need an SSH *server* for that. I don't have one of those (although it should be possible to write or port one), but an FTP / Telnet server is pretty easy.
Alternatively, you can use the Webserver app in my signature.
Note that in either case, this will let you browse only small parts of the file system (the Windows directory and the application's own directories). The AllCapabilities version of the webserver has more access (it can see other apps, your documents and media folders, OEM folders, and the entire SD card), but is still restricted. You need capability-unlock (usually means a Samsung phone) to install the AppCaps version of the app.