So, after using aplharev tool for S-off, my splash screen ended up with the joker´s picture on it. I´ve tried to change it using the NBIMG command-line splash<-->image converter tool but when I try to send it to the phone using ''fastboot flash splash1 splash1.img'' I get
sending 'splash1' (750 KB)... FAILED (status malformed (1 bytes))
finished. total time: 0.000s
how can I fix this?
tavocabe said:
So, after using aplharev tool for S-off, my splash screen ended up with the joker´s picture on it. I´ve tried to change it using the NBIMG command-line splash<-->image converter tool but when I try to send it to the phone using ''fastboot flash splash1 splash1.img'' I get
sending 'splash1' (750 KB)... FAILED (status malformed (1 bytes))
finished. total time: 0.000s
how can I fix this?
Click to expand...
Click to collapse
try this, little tool. run the runme1st.bat, say wich HTC you got, after, launch the multitool.bat and choose option 1
or this one
http://forum.xda-developers.com/showthread.php?t=794638
Related
Hi every one,
So, I was in stock 4.1.2 ... changed my bootloader to 3.34 (4.1.1 version using a .img flash) to root my N7 and afterwards flashed bootloader 3.41 (4.1.2 version using a .zip flash)
So I got the Google 4.2 image. Proceeded to flash it using wugfresh toolkit as says this thread but started to have multiple "failed" lines... mainly "too many links" and "unknown error"... I’ve tried all the ways I could think of and I’ve found on the internet but none have worked.
What I have in hand:
wugfresh toolkit 1.5.5
nexus 7 toolkit 3.2.0
Google original 4.2 image (nakasi-jop40c-factory-6aabb391.tgz)
bootloader-grouper-3.34.img
JZO54K_bootloader.zip (3.41 bootloader)
access to fastboot
I think that if I flash a proper 3.41 bootloader image (from an .img file) I might go thru the process successfully... any other help or suggestion I would really appreciate it.
Also, here is a resume of what I got when I try to flash 4.2 image:
Code:
erasing 'boot'...
FAILED (status read failed (Too many links))
finished. total time: 0.062s
erasing 'cache'...
FAILED (command write failed (Unknown error))
finished. total time: 0.593s
erasing 'recovery'...
FAILED (command write failed (Unknown error))
finished. total time: 0.624s
erasing 'system'...
FAILED (unknown status code)
finished. total time: 39.874s
erasing 'userdata'...
FAILED (command write failed (No such file or directory))
finished. total time: 0.016s
sending 'bootloader' (2096 KB)...
FAILED (command write failed (No such file or directory))
finished. total time: -0.000s
rebooting into bootloader...
FAILED (command write failed (No such file or directory))
finished. total time: -0.000s
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
< waiting for device >
Thanks everyone in advanced!!!!!!
Hi All,
I know I have messed up, but want to know is there any remote possible way to do this?
I tried to flash and it failed and on top of that I used
Code:
fastboot oem lock
which has made it even more miserable. I am not able to recover anything now. This what I have tried to unlock OEM -
Code:
C:\>fastboot oem unlock
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.014s
C:\>fastboot oem get_unlock_data
...
(bootloader) This command is not needed to unlock. Run fastboot oem
(bootloader) unlock directly.
OKAY [ 0.029s]
finished. total time: 0.031s
I tried to install Google Stock by pressing on flash-all -
Code:
error: cannot load 'bootloader-shamu-moto-apq8084-71.08.img'
rebooting into bootloader...
OKAY [ 0.000s]
finished. total time: 0.000s
error: cannot load 'radio-shamu-d4.0-9625-02.95.img'
rebooting into bootloader...
OKAY [ 0.016s]
finished. total time: 0.016s
error: failed to load 'image-shamu-lmy47i.zip': No such file or directory
Press any key to exit...
Screens have been attached
Is there any remote possibility on what can be done?
What I learned is when new stuffs arrive study it properly before messing with it around :laugh:
stygianblizzard said:
Hi All,
I know I have messed up, but want to know is there any remote possible way to do this?
I tried to flash and it failed and on top of that I used
Code:
fastboot oem lock
which has made it even more miserable. I am not able to recover anything now. This what I have tried to unlock OEM -
Code:
C:\>fastboot oem unlock
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.014s
C:\>fastboot oem get_unlock_data
...
(bootloader) This command is not needed to unlock. Run fastboot oem
(bootloader) unlock directly.
OKAY [ 0.029s]
finished. total time: 0.031s
I tried to install Google Stock by pressing on flash-all -
Code:
error: cannot load 'bootloader-shamu-moto-apq8084-71.08.img'
rebooting into bootloader...
OKAY [ 0.000s]
finished. total time: 0.000s
error: cannot load 'radio-shamu-d4.0-9625-02.95.img'
rebooting into bootloader...
OKAY [ 0.016s]
finished. total time: 0.016s
error: failed to load 'image-shamu-lmy47i.zip': No such file or directory
Press any key to exit...
Screens have been attached
Is there any remote possibility on what can be done?
What I learned is when new stuffs arrive study it properly before messing with it around :laugh:
Click to expand...
Click to collapse
If you don`t have TWRP installed you`re screwed and you have to send it in for repair .....
gee2012 said:
If you don`t have TWRP installed you`re screwed and you have to send it in for repair .....
Click to expand...
Click to collapse
Ya its there... I switch to TWRP or bootloader and trying to experiment more to get out of it. Thing is I am not able to flash anything. I tried pushing google stock files using ADB commands but when I am trying to install them its failing.
stygianblizzard said:
Ya its there... I switch to TWRP or bootloader and trying to experiment more to get out of it. Thing is I am not able to flash anything. I tried pushing google stock files using ADB commands but when I am trying to install them its failing.
Click to expand...
Click to collapse
Try this: Reboot to bootloader, select recovery mode, enter TWRP, mount MTP and push/sideload and flash a flashable image from here http://forum.xda-developers.com/nexus-6/development/fxz-nexus-6-recovery-flashable-fastboot-t3066052.
gee2012 said:
Try this: Reboot to bootloader, select recovery mode, enter TWRP, mount MTP and push/sideload and flash a flashable image from here http://forum.xda-developers.com/nexus-6/development/fxz-nexus-6-recovery-flashable-fastboot-t3066052.
Click to expand...
Click to collapse
TWRP cannot flash the stock images. Only flash able zips. The modified zips linked by @gee2012 should work
gee2012 said:
Try this: Reboot to bootloader, select recovery mode, enter TWRP, mount MTP and push/sideload and flash a flashable image from here http://forum.xda-developers.com/nexus-6/development/fxz-nexus-6-recovery-flashable-fastboot-t3066052.
Click to expand...
Click to collapse
Just few mins got img downloaded. That was bloody awesome. I dont know how to thank you :laugh::laugh::laugh::good:
Superb
Its working again!!!!!
How to flash bootloader on this phone???
i only has fastboot mode,
when it power on there all many horizontal lines on the screen, i tryed to flash bootloader but no succes
it says ''
sending 'bootloader' (169 KB)...
OKAY [ 0.014s]
writing 'bootloader'...
FAILED (remote: Command not allowed)
finished. total time: 0.045s
''
Help me
Need help ...
malivrag11 said:
How to flash bootloader on this phone???
i only has fastboot mode,
when it power on there all many horizontal lines on the screen, i tryed to flash bootloader but no succes
it says ''
sending 'bootloader' (169 KB)...
OKAY [ 0.014s]
writing 'bootloader'...
FAILED (remote: Command not allowed)
finished. total time: 0.045s
''
Help me
Click to expand...
Click to collapse
Remov 0x in the bootloader unlock code
I had the same prob
it say : ''FAILED (remote: Incorrect format for unlock data. Should be on the form "0x)
finished. total time: 0.043s''
no success at all help me
malivrag11 said:
it say : ''FAILED (remote: Incorrect format for unlock data. Should be on the form "0x)
finished. total time: 0.043s''
Click to expand...
Click to collapse
Me too .help ne
c5503
There HTC 626G, revision 1.79.401.100. During the study, on new devices starting with the revision (build) 1.72.401.101, with modified firmware recovery phone goes bootloop. Initially it was assumed that the problem was incompatible version recovery (old and new versions). new recovery was made under my revision, and after flashing turned bootloop.
When loading stock version:
fastboot flash recovery recovery_stock.img responses with:
sending 'recovery' (10240 KB)...
OKAY [ 0.417s]
writing 'recovery'...
FAILED (remote:
Security deny - Err:0x2017
)
finished. total time: 0.430s
Since version error recovery not confirmed, it remains an unlocked bootloader.
When you enter the command:
C:\Users\bugae\Desktop\android>fastboot oem get_identifier_token
...
FAILED (remote: unknown command)
finished. total time: 0.007s
C:\Users\bugae\Desktop\android>fastboot oem identifier_token
...
FAILED (remote: unknown command)
finished. total time: 0.006s
C:\Users\bugae\Desktop\android>fastboot oem token
...
FAILED (remote: unknown command)
finished. total time: 0.020s
fastboot oem unlock (the tablet responses with a question screen where I can select "yes, unlock bootloader" and "no, don't unlock bootloader", but when I select yes it responses with an error "Unlock failed - Err:0x7000")
Standard methods do not work!(
How to be? What to do?
Backup 4pda.ru/forum/index.php?s=&showtopic=756527&view=findpost&p=53005677
Try using win droid toolkit, I had the same issue with my 626 and I fixed mine here's a link
http://forum.xda-developers.com/devdb/project/?id=1314#downloads
https://forum.xda-developers.com/showpost.php?p=77300835&postcount=2
i have another huawei device, but not honor play.
Now the display can't show me anything even if I press the power button.
Then i connected my phone to my computer and i found that my phone had automatically booted bootloader without showing me anything on its display
i entered fastboot flash recovery recovery.img
it said failed remote command not allowes
i entered fastboot oem relock (password)
it said OKAY
i entered fastboot oem unlock (password)
it said OKAY
i entered fastboot flah boot boot.img
it said failed remote partition length get erro
i used hisuit but it failed when flashing recovery
So i can hardly do anything
how to deal with the problem?
pls help me
thank u
Post proper log.
Bootloader lock or unlock?
It seens that you are tring to flash wrong boot.img cause it shows that length error means boot.img size is higher than the actual partion is
Can you enter erecovery??
Nwereonye said:
Can you enter erecovery??
Click to expand...
Click to collapse
No. the phone cant show me anything. if i try to turn it off, it will restart.(according to my computer)
rajit said:
Post proper log.
Bootloader lock or unlock?
It seens that you are tring to flash wrong boot.img cause it shows that length error means boot.img size is higher than the actual partion is
Click to expand...
Click to collapse
I'm busy these days. I'll post the log some days later
rajit said:
Post proper log.
Bootloader lock or unlock?
It seens that you are tring to flash wrong boot.img cause it shows that length error means boot.img size is higher than the actual partion is
Click to expand...
Click to collapse
Today I download a package for my device from Firmware finder for Huawei. Then I used Huawei Update Extractor to extract some of the files and tried to flash them to my phone. But failed.
Here's the log
PS C:\WINDOWS\system32> fastboot devices
3CG4C16817019572 fastboot
PS C:\WINDOWS\system32> fastboot flash boot C:\Users\yyche\Desktop\update\BOOT.img
target reported max download size of 471859200 bytes
sending 'boot' (15494 KB)...
OKAY [ 0.400s]
writing 'boot'...
FAILED (remote: partition length get error)
finished. total time: 0.430s
PS C:\WINDOWS\system32> fastboot flash crc C:\Users\yyche\Desktop\update\CRC.img
target reported max download size of 471859200 bytes
sending 'crc' (161 KB)...
OKAY [ 0.006s]
writing 'crc'...
FAILED (remote: Command not allowed)
finished. total time: 0.017s
PS C:\WINDOWS\system32> fastboot flash fastboot C:\Users\yyche\Desktop\update
error: cannot load 'C:\Users\yyche\Desktop\update'
PS C:\WINDOWS\system32> fastboot flash fastboot C:\Users\yyche\Desktop\update\FASTBOOT.img
target reported max download size of 471859200 bytes
sending 'fastboot' (3128 KB)...
OKAY [ 0.081s]
writing 'fastboot'...
FAILED (remote: Command not allowed)
finished. total time: 0.092s
PS C:\WINDOWS\system32> fastboot flash recovery C:\Users\yyche\Desktop\update\RECOVERY.img
target reported max download size of 471859200 bytes
sending 'recovery' (35540 KB)...
OKAY [ 0.914s]
writing 'recovery'...
FAILED (remote: partition length get error)
finished. total time: 0.946s
PS C:\WINDOWS\system32> fastboot oem unlock 1**************4
...
FAILED (remote: already fastboot unlocked)
finished. total time: 0.004s
Do not flash the latest version, it seems u r tying to flash Android Pie. Try to flash Oreo (8.0) version of rom or the one that comes factory installed.