Related
Anybody outhere has this one?
It seems nice and comfortable...
http://cgi.ebay.co.uk/New-Black-Sil...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I ordered a couple of silicon cases but they are yet to arrive... I'll let you know.
Ok, got the Silicon Cases... First thing, it is a pretty thick silicon case (I have seen much thiner ones for other phones) and makes the phone quite a bit bigger when fitted. I think the slide requires the sides to be pretty thick...
that said, my old Wizard started to look pretty rough after a couple of years. I think I will stick with the case.
any chance of a few decent pics of it fitted to the dual
CAM77 said:
Ok, got the Silicon Cases... First thing, it is a pretty thick silicon case (I have seen much thiner ones for other phones) and makes the phone quite a bit bigger when fitted. I think the slide requires the sides to be pretty thick...
that said, my old Wizard started to look pretty rough after a couple of years. I think I will stick with the case.
Click to expand...
Click to collapse
I ordered a silicon case too but still waiting for it...
Here you can find a picture...
http://cgi.ebay.com/EXiM-Protector-...ameZWDVWQQrdZ1QQcmdZViewItem#ebayphotohosting
It seems that unfortunately there's no other manufacturer for this kind of product for Dual...
I don't think the aluminium one could be better..
http://cgi.ebay.com/PDair-Aluminium...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
And the leather one is horrible..
The wife has ditched the Silicon case (and my Touch Dual is still awaiting replacement - due to slider gap problem) but I might try and put it back on and get some photos.
Anyone tried one of these for either this or another device??
http://www.shieldzone.com/item_description/HTCTOUDUAFB.html
CAM77 said:
http://www.shieldzone.com/item_description/HTCTOUDUAFB.html
Click to expand...
Click to collapse
Wow...this is one of the best i've seen...
Maybe a little bit expensive...and not so esay to install...
Any other manufacturer of this kind of product?
I haven't seen it on ebay for Touch dual...
I have found a couple. Some only do iPod's...
This one does HTC Touch but no Dual yet (I have emailed them to ask if and when it would be avaialble).
http://www.bodyguardz.com
I thought someone out there may have used one of these on an ipod or other PDA and might offer an opinion before I purchased?
Actually... http://forum.xda-developers.com/showthread.php?t=333707&highlight=invisibleshield
Thank you very much CAM77 for providing these informations...
I'm actually waiting for the silicon case but actually don't think I'll get the invisible shield...I read quicky a few comments and was a little bit disappointed hearing that sometimes small parts are missing and corners are not covered...
has anyone seen anything like these availablke in the UK?
http://event.ruten.com.tw/htc20071108/
i have the invisible shield on my ipod and it is fantastic. does not degrade the touch wheel at all and protects the entire device. i will likely get it for my touch dual as well. it's worth every cent.
the touch doesnt have a glossy finish.. its more of a rubbery feel. will it not ruin this?
ducamie said:
the touch doesnt have a glossy finish.. its more of a rubbery feel. will it not ruin this?
Click to expand...
Click to collapse
my guess is that it'll probably take away from the rubbery feel a bit. but it will protect the device really well. if you want to retain the rubbery feel, you can just get the screen protector for it.
Case makes the phone bigger thats for sure but i like it because helps me understand when the touch screen ends (helpfull for scrolling).
dahquim said:
has anyone seen anything like these availablke in the UK?
http://event.ruten.com.tw/htc20071108/
Click to expand...
Click to collapse
it's just a vinyl sticker. find a store that makes custom stickers, im sure they can make something similar to that
delta37 said:
it's just a vinyl sticker. find a store that makes custom stickers, im sure they can make something similar to that
Click to expand...
Click to collapse
I remember to have read somewhere that it is a limited edition of a Touch Elf...don't think it is available for the dual...
EDIT: http://www.intomobile.com/2007/11/09/htc-touch-special-editions.html
Hello all... I'm new to this forum but have found it quite helpful in my quest to optimize and get every bit of juice out of my HD2. I have looked through so many posts trying to find information on stands as I have just purchased my apple bluetooth keyboard for use as a note taking device at school. I was going to buy another eeepc after I sold mine, but realized that with the keyboard this baby is actually quite powerful enough to be a baby computer at school. A lot of the stands seem really cool but I was wondering if anyone had found or figured out a way to modify a stand that could securely clip onto the space at the top of the apple keyboard.
Attached is a link to an image of the keyboard to give you an idea of what I'm working with. Seems the space at the top is about an inch. As I can't seem to find one I can buy yet, I've been trying to think of ways I could create a clip on from one of the stands like the smart stand but thought I'd throw this out to you guys for some ideas as I'm not getting very far. Sorry if this has been covered before, but I did do a lot of searching and didn't seem to find anything like this in particular so thought I'd post.
And, btw, I'm Elle. Nice to meet you guys.
Cool idea...let us know if you figure something out.
The whole concept just sounds strange to me. Using a small phone with a massive keyboard just to do some notes. Granted both devices are beautiful but working them both together, er no.
However each to their own and all. I can't think of a way to attach them together which wouldn't inherently ruin either the phone or keyoard but what I'd do if I was so inclined to use them both together, would be maybe buy the extended battery with kickstand and then use it like the image below (obviously you wouldn't need to lean your phone against the wall with the kickstand ).
I fail to see why the HD2 needs to be attached to the keyboard in the first place .
Update - my girlfriend has suggested you just use a bit of blu-tac lol.
That's what I've been doing, just without an appropriate stand but a self-created one. It's actually a rather cool setup; this is the smaller version of the keyboard and it decreases the weight I carry around immensely. The keyboard syncs wonderfully, I just thought it might be cool if there was a way to attach it to the keyboard. I'll let you guys know if I figure anything out specifically, there seems to be some interesting ways to manufacture a simple clip on that I'm figuring out the details for at the moment.
Did you ever figure out a simple stand? I just bought one of these keyboards. and it paired perfectly and all the keys work, except the specialized function keys.
Compared to other available bluetooth keyboards (Stowaway, Freedom, etc.), this one is probably overall less space (by volume) and lighter.
Cheers
Capdase stand
hi. Just to let you know that this stand actually works.
Alright, ignoring the iPhone (it sux anyways. ), the translucent stand thats holding the phone actually fits the hd2. Not only that, I have the silicon casing around the hd2 and the stand still fits! Of course, it stretches as the iphone is of a smaller width. How do i know? I tested my bro's stand and it has been with me since. Lets just say that the holder was no longer meant for the iphone due to the bigger hd2. I.e. Its mine!
P.s It goes horizontal and vertical.
There's a couple of threads on make-your-own stands My favourite is the credit-card one, which you then fold out whenever you need it. Keep it in your wallet/as part of your phone case and you're there!
http://forum.xda-developers.com/showthread.php?t=603363
iPhone stand
CCheck out this one: w w w. northsecure. com/iphone-stand/ (remove spaces)
Old thread, but anyway the extended battery with it's kickstand would do this amazingly
Last night I got inspired (by the Netflix app ) to make a functional and nice looking stand. But instead of jumping in blindly with plexiglass or something I built a prototype out of cardboard.
I was thinking of making the final version a bit smaller so it fits nicer when vertical and maybe making a notch in it so the home button is accessible. Something I can't figure out how to fix is that the speaker is inside the stand when vertical. But other than that I'm really happy how this turned out and can't wait to make a final version.
Attached are some pictures of it holding the Nook horizontal and vertical. Any comments, ideas or questions would be appreciated. Thank you.
Not bad though if you are worried about the speaker it would be realy easy to rigup a pair of speakers with a 1/8" stereo jack on your final build
Wouldnt it just be easier/cheaper to buy one of those stands?
Im all about making custom things, but in this case, I dont see the benfit of what you made versus this: http://www.amazon.com/Arkon-Portabl...VOOY/ref=sr_1_2?ie=UTF8&qid=1305477985&sr=8-2
michaelg1030 said:
Wouldnt it just be easier/cheaper to buy one of those stands?
Im all about making custom things, but in this case, I dont see the benfit of what you made versus this: http://www.amazon.com/Arkon-Portabl...VOOY/ref=sr_1_2?ie=UTF8&qid=1305477985&sr=8-2
Click to expand...
Click to collapse
Ah phooey! I see the benefit of DIY. True, sometimes there are cheaper solutions out there. But this user's solution gave "me" many ideas for other devices, my wife's iPad, my Evo, Books! I like the ingenuity involved in the OP's solution. I'm going to make something like this out of plexiglass--the OP's idea. 1 sheet of pl (home depot), my jigsaw, some cement, buff the edges, felt the edges to protect the nook, rubber little feet (Rite Aid), listen to jazz while I'm making it and have a blast! $20. It's going to look a lot better than a little cheap rack holding holding up a nook. Nice going!
I agree, sometimes it's about the journey, not the destination.
michaelg1030 said:
Wouldnt it just be easier/cheaper to buy one of those stands?
Im all about making custom things, but in this case, I dont see the benfit of what you made versus this: http://www.amazon.com/Arkon-Portabl...VOOY/ref=sr_1_2?ie=UTF8&qid=1305477985&sr=8-2
Click to expand...
Click to collapse
I have one of these and, while it's great for my XOOM, it doesn't really fit the NC very well. It's OK for landscape but if you want your NC to stand in portrait while charging you have to put the stand on a book or the edge of a table to allow space for the cable. Actually I found this thread because I was looking for a better stand.
I definitely see the advantages of DIY to satisfy your own requirements. Good luck!
I use this case stand since I got my Nook Color in January. I see that now Amazon for fulfils the orders for it now. I had to wait two weeks back then but it was worth it. No excuses not to get it now.
http://www.amazon.com/rooCASE-Leath...3?s=electronics&ie=UTF8&qid=1306015551&sr=1-3
Get a good Bluetooth keyboard I actually bought the Apple one from Amazon and you're in heaven.
Here's the case:
http://www.amazon.com/gp/product/B007S9ZSGW/ref=oh_details_o06_s00_i00
It has all of the correct cutouts. I also like that the speaker cutout is open, as opposed to a bunch of holes like I've seen in other cases. It does add some bulk due to the fact that it can rotate 360 degrees, but it not enough that I can't slip it in my rear pant pockets. It has a loop for the stylus, as well as the magnet wake/lock. It also doesn't have the flaw that other cases have where it locks the tablet when you fold the cover back against itself. I like the white stitching and the fact that it doesn't cover the bezel, which is a deal breaker for me, since covered bezels tend to hinder you when navigating the UI. It also has deep grooves so that it doesn't slip when you have it propped open. Also, when in Portrait mode, you can only use it on the last groove. Any of the other 2 grooves can't support it. When it is on the last groove, I can use it without feeling like it's going to fall back, so it's supported very well in that aspect.
This is the same case that I have for my Blackberry Playbook, and on that back of the Playbook, it has the Blackberry Logo, which you can see through that open hole in the back so it looks nice. On the Nexus, there's no logo or anything on the back that shows through the hole, so I wish that it was covered for the Nexus version. Another small gripe would be the location of the Stylus loop.....if you have the case open and you have a stylus in it, the tab will be at a slight angle. I tested it and it doesn't take away from the sturdiness of it, just a small observation.
All in all, I'm happy with it so far. The seller refunded me the money since I was supposed to receive it last week and it got lost misplaced somewhere in shipping and ended up getting routed to Cali first before coming here, so I give him props for great customer service.
Nice review! The case looks better than I had imagined.
I got the same case delivered on Saturday. Works well. Feel a lot safer carrying it around to and from work now.
I may get the slim fit version as well at some point so it isn't quite as thick, but it does feel solid in this thing.
I notice you have a skin on the back of your nexus. Does it get in the way with the case at all, and if you pull the tab out of the case, has it mangled the skin at all on any pressure points?
I have a skin as well but am reluctant to put it on for this reason, and being that the back is rubberized i dont feel like it really needs it in the first place.
Thanks for the review. Really wish they had more color choices! I want a case that sits portrait (I read a lot) & landscape (Netflix). I already have a case for now, but I'm looking to replace it with one that does everything I want... like this one! I'll wait it out a bit & see if they come out with more colors.
regalpimpin said:
I got the same case delivered on Saturday. Works well. Feel a lot safer carrying it around to and from work now.
I may get the slim fit version as well at some point so it isn't quite as thick, but it does feel solid in this thing.
I notice you have a skin on the back of your nexus. Does it get in the way with the case at all, and if you pull the tab out of the case, has it mangled the skin at all on any pressure points?
I have a skin as well but am reluctant to put it on for this reason, and being that the back is rubberized i dont feel like it really needs it in the first place.
Click to expand...
Click to collapse
Yes, I have an XtremeGuard body protector on it and it doesn't get in the way. I've taken it out of the case a few times and the protector's not bunching up. The protector's been on the Nex7 for over a week, so it's cured pretty well. I wouldn't try it on a fresh protector install. I'd give it about a week so that it sets right before putting it in a case like this.
Prey521 said:
Here's the case:
http://www.amazon.com/gp/product/B007S9ZSGW/ref=oh_details_o06_s00_i00
It has all of the correct cutouts. I also like that the speaker cutout is open, as opposed to a bunch of holes like I've seen in other cases. It does add some bulk due to the fact that it can rotate 360 degrees, but it not enough that I can't slip it in my rear pant pockets. It has a loop for the stylus, as well as the magnet wake/lock. It also doesn't have the flaw that other cases have where it locks the tablet when you fold the cover back against itself. I like the white stitching and the fact that it doesn't cover the bezel, which is a deal breaker for me, since covered bezels tend to hinder you when navigating the UI. It also has deep grooves so that it doesn't slip when you have it propped open. Also, when in Portrait mode, you can only use it on the last groove. Any of the other 2 grooves can't support it. When it is on the last groove, I can use it without feeling like it's going to fall back, so it's supported very well in that aspect.
This is the same case that I have for my Blackberry Playbook, and on that back of the Playbook, it has the Blackberry Logo, which you can see through that open hole in the back so it looks nice. On the Nexus, there's no logo or anything on the back that shows through the hole, so I wish that it was covered for the Nexus version. Another small gripe would be the location of the Stylus loop.....if you have the case open and you have a stylus in it, the tab will be at a slight angle. I tested it and it doesn't take away from the sturdiness of it, just a small observation.
All in all, I'm happy with it so far. The seller refunded me the money since I was supposed to receive it last week and it got lost misplaced somewhere in shipping and ended up getting routed to Cali first before coming here, so I give him props for great customer service.
Click to expand...
Click to collapse
Picture #3, how did you get traffic webcam as widget? Seems useful.
taC nayN said:
Picture #3, how did you get traffic webcam as widget? Seems useful.
Click to expand...
Click to collapse
Ah, that's not a traffic cam widget....that my News360 App widget and the headline was for an overturned truck on a highway near my house lol
LovelyLush said:
Thanks for the review. Really wish they had more color choices! I want a case that sits portrait (I read a lot) & landscape (Netflix). I already have a case for now, but I'm looking to replace it with one that does everything I want... like this one! I'll wait it out a bit & see if they come out with more colors.
Click to expand...
Click to collapse
I'm OK with the black case.....never been a fan of colorful cases. If I had to pick 1 other color, it would probably be like a dark blue.....nothing girly LOL
Nce review ty, I like the case seems decent for protection...even tho a tad thick. I think I well get this one even so based on the review plus I like the look.
Nice right up. Off subject what ROM are you running?
superman.namrepus said:
Nice right up. Off subject what ROM are you running?
Click to expand...
Click to collapse
Modaco JR6 with the Motley Kernel....runs like gangbusters!!
Prey521 said:
Modaco JR6 with the Motley Kernel....runs like gangbusters!!
Click to expand...
Click to collapse
Haha, that was going to be my question
Metalor696 said:
Haha, that was going to be my question
Click to expand...
Click to collapse
I have switched in the last few weeks to the Paranoid Android ROM with the Trinity Kernel. It runs great.
Thought about this case as well, but went with the official travel case.
Bought this case because of your review. It's exactly what I was looking for. Thanks.
Sent from my Google Nexus 7 using Tapatalk 2
I have a similar one bought off ebay. I'm happy with it. The only downside of that case is the circular bit at the back where it rotates.It can potentially scratch the back of the Nexus 7 so I have put a clear protective plastic on the back of the N7.
http://www.ebay.com/itm/181001261212?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
Do yall think this case looks cheap? I mean, its definitely gimmicky (and i like gimmicky) but would you all purchase it? I like the fact that it's got more than one "function" (to answer calls when the cover is still on and to be able to read the name of the caller) but do yo think the cutouts would jeopardize the screen if dropped? I wanna get it but id prefer opinions first. They made it for the OG Note too.
graveghoul said:
http://www.ebay.com/itm/181001261212?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
Do yall think this case looks cheap? I mean, its definitely gimmicky (and i like gimmicky) but would you all purchase it? I like the fact that it's got more than one "function" (to answer calls when the cover is still on and to be able to read the name of the caller) but do yo think the cutouts would jeopardize the screen if dropped? I wanna get it but id prefer opinions first. They made it for the OG Note too.
Click to expand...
Click to collapse
I have it at home and it's pretty nice.
The edges stick out a little bit and they're a little thin making the corners a little extra pokey but it's not a big deal.
The only reason I'm not using it right now is because I'm not a huge fan of the flip-cover type cases. I use my phone a lot more than I use my tablet so it didn't make much sense for me. It did look nice though, it had a nice feel to it, and great for the price.
Answering calls without opening the case was actually pretty cool every single time I got a call, so that's something you can look forward to.