Database Develop

[Q] Nexus one not turn on WIFI. notice ERROR?

Hi all!
i'm new member! i 'd like are support from xda
i have up ROM CM7-cyanogenmod 7 but not connect to signal wifi.
when i turn on wifi that not yet (failure). under is message appeares (WI-FI "erro").
ROM is 139..
i trying much times but failure.
I hope yours support !
tks very much!

Have you installed a wifi tether app? Mine did this on builds recently, I fixed it by uninstalling the app and flashing the build again. Hope this helps.
Sent from my Transformer TF101 using XDA Premium App

thanks!
but, can you show step by step.?

He asked if you installed a wifi tether app? That is either a yes or a no.
He says if yes try to uninstall it ( which means uninstall a wifi tether app if you installed one) and reflash the rom. That would be um just reflashing the rom. To see if that fixes it.
If you say no to his did you install a wifi tether app then don't bother with his suggestion. That is what he is saying.

laobo said:
thanks!
but, can you show step by step.?
Click to expand...
Click to collapse
Albundy2010 is right, I think what chris said is already step by step. "uninstalling app" and reflashing the rom.. there's nothing more to it. You are flashing nightly roms, therefore you SHOULD know how to flash a new build *I really hope so!*

KAwAtA said:
Albundy2010 is right, I think what chris said is already step by step. "uninstalling app" and reflashing the rom.. there's nothing more to it. You are flashing nightly roms, therefore you SHOULD know how to flash a new build *I really hope so!*
Click to expand...
Click to collapse
I have install the wifi tether app. then turn on WIFI, it like done continue scan points of wifi and my phone hang.
next uninstall wifi tether app, reflash the ROM. and now! Not better...

Use a root file explorer and check your available memory under \system. If your memory is too low when flashing a new ROM, bits and bobs associated with the kernel are not flashed resulting in wifi failing to initialize.
This happened to me before (had only 40KB) so I moved a couple of apps from \system to \data reflashed and problem solved.
With the size of the ROMs continuing to grow, this will be a problem with the limited storage on our N1's.

Why are you guys even installating a wifi tether app in anyways? The nexus one supports wifi tethering stock. I have not ran a stock rom in a while. Am I missing something here?
Sent from my Nexus One using XDA App

Thanks about your comments!
Rod3 said:
Use a root file explorer and check your available memory under \system. If your memory is too low when flashing a new ROM, bits and bobs associated with the kernel are not flashed resulting in wifi failing to initialize.
This happened to me before (had only 40KB) so I moved a couple of apps from \system to \data reflashed and problem solved.
With the size of the ROMs continuing to grow, this will be a problem with the limited storage on our N1's.
Click to expand...
Click to collapse
can you show me wipe full my phone to not happen memory is too low
albundy2010 said:
Why are you guys even installating a wifi tether app in anyways? The nexus one supports wifi tethering stock. I have not ran a stock rom in a while. Am I missing something here?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
maybe i wiill reflasing stock ROM to check hard wifi?
because ago, when i used ROM stock, my phone happen hang, some times

Semi brick. Need help

Basically I've screwed over my phone.
It WILL boot. However I can't get it to go into USB mode.
I'm on Android 2.3.5 and I have this rom installed. http://forum.xda-developers.com/showthread.php?t=1779290
When I try to flash from a backup, it fails flashing system and renders my phone a brick until I reinstall the above ROM
I've also tried going into download mode so I can use the official LG updater to flash it back completely stock. However I can't seem to get that working.
Any help is appreciated. Thanks.

DracoAzule said:
Basically I've screwed over my phone.
It WILL boot. However I can't get it to go into USB mode.
I'm on Android 2.3.5 and I have this rom installed. http://forum.xda-developers.com/showthread.php?t=1779290
When I try to flash from a backup, it fails flashing system and renders my phone a brick until I reinstall the above ROM
I've also tried going into download mode so I can use the official LG updater to flash it back completely stock. However I can't seem to get that working.
Any help is appreciated. Thanks.
Click to expand...
Click to collapse
First you are posting in the wrong section.
Second, what baseband do you have installed. I am running on a Froyo baseband and can't run thrillseeker due to the baseband requiring the GB baseband. You can probably return to stock by using this guide http://forum.xda-developers.com/showthread.php?t=1491870
From what I am reading, the LG Updater sometimes will fail but you just have to continue using it.
Good luck with your issue. I am planning to do the same to my nephews phone later today. If i can figure something out I will post back.

I think its V20P which is Gingerbread. I know when I last updated it I used the official updating tool and grabbed it from their server. But again I'm on Android 2.3.5 Gingerbread. Will those update.zip files work?
Sent from my LG-P925 using xda app-developers app

DracoAzule said:
I think its V20P which is Gingerbread. I know when I last updated it I used the official updating tool and grabbed it from their server. But again I'm on Android 2.3.5 Gingerbread. Will those update.zip files work?
Sent from my LG-P925 using xda app-developers app
Click to expand...
Click to collapse
Everything works except USB ?.....does the phone charge through USB and just doesn't give you the option to connect SD cards?
Sent from my LG-P925 using xda premium

Bdadd34 said:
Everything works except USB ?.....does the phone charge through USB and just doesn't give you the option to connect SD cards?
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
Yea it charges but that's it.
Luckily I have SwiFTP installed on my phone so I can still transfer things back and fourth between my phone and PC over my home network via FTP. Just much, MUCH slower.
EDIT: I just realized why this was in the wrong section. I TOTALLY thought I was posting in the general forum. Sorry. *derp*

Bump

First thing uninstall LG PC drivers then reboot PC and reinstall them. Or try to connect to a different PC to make sure it is not PC related. If that doesn't work then try wiping caches and instsall a different kernel. If that doesn't work I would then try full data wipe and reinstall rom of choice. You might try different rom as once its fixed you can always flash back...hope this helps you.
Sent from my LG-P925 using xda premium

Well I believe I've figured out what the problem was.
You see the other day while I was charging the phone I accidentally knocked it off. The USB cable got caught on my alarm clock and caught the phone, so the phone was hanging by the USB cable.
Well today I looked at the connector on it and I noticed it was bent a little. So I bent it back up and heard a small *click*
I was afraid I had broke it completely inside. However when I plugged it in my computer recognized my phone and USB mode showed up.

[Q] I957 ATT , touch screen not working after ICS upgrade

Hello,
I have gotten the stock ICS rom from samfirmware.com, Installed using ODIN and it all went green.
However, after restart the touch screen is not working !
I have tried the following:
1. First the Default (XXX) ICS rom
2. Second, the Actual ATT ICS rom
3. Flashed CWM and it is working
4. Then tried AOKP unofficial rom, not starting
No luck so far, any help is much appreciated please.

The touch screen was working after step 3?
Sent from my SAMSUNG-SGH-I727 using xda premium

wamaOnline said:
Hello,
I have gotten the stock ICS rom from samfirmware.com, Installed using ODIN and it all went green.
However, after restart the touch screen is not working !
I have tried the following:
1. First the Default (XXX) ICS rom
2. Second, the Actual ATT ICS rom
3. Flashed CWM and it is working
4. Then tried AOKP unofficial rom, not starting
No luck so far, any help is much appreciated please.
Click to expand...
Click to collapse
Do you know what rom you flashed from Sam mobile?
Sent from my SAMSUNG-SGH-I957

jd1639 said:
Do you know what rom you flashed from Sam mobile?
Sent from my SAMSUNG-SGH-I957
Click to expand...
Click to collapse
First was this one sammobile (dot) com /firmware/?page=3&model=SGH-I957&pcode=XXX&os=1&type=3#firmware[/url]
Then when it didn't work, tried this one
sammobile (dot) com /firmware/?page=3&model=SGH-I957&pcode=ATT&os=1&type=3#firmware
Sorry for the strange URL format, but seems as anew member I don't get to add URLs yet
orlandoxpolice said:
The touch screen was working after step 3?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Sorry, I meant the cwm recovery was flashed correctly and functioning
Btwi tried the fix permissions suggestion from the similar thread but no luck

What version of odin did you use? The roms look ok. If you didn't use ver 1.85 download that and re flash the Rom.
Sent from my SAMSUNG-SGH-I957

jd1639 said:
What version of odin did you use? The roms look ok. If you didn't use ver 1.85 download that and re flash the Rom.
Sent from my SAMSUNG-SGH-I957
Click to expand...
Click to collapse
It is the Odin version I have used,
One more note now, am not sure if that is normal if not.but after the latest flash ( preceded by a data wipe and format ) I can now see zip file I have placed on sdcard but can't access them for flashing and/or ad new zip files from pc

In cwm do a factory reset, wipe and format system and data and then boot. I'm hoping that will solve the problem.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

jd1639 said:
In cwm do a factory reset, wipe and format system and data and then boot. I'm hoping that will solve the problem.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Tried,booted, "SAMASUNG"screen only ( as expected sicne i formatted the system ), then re-flushed the ATT ICS and same output
Am trying to get a new ROM flashed, but when the device powers up [ without me going through the wizard ], i can't write anything to SD from my PC.
Any info around here about flashing CM or AOKP using ODIN for this I957 ?

Not with Odin that I'm aware of. All are zip files and would go thru cwm. If you get only to the Samsung logo, my experience has been a factory reset usually gets you past that and if that doesn't work flashing the stock rom with Odin does. And I'd flash the honeycomb rom and bring it back to they way I bought it, then upgrade to ics
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

jd1639 said:
Not with Odin that I'm aware of. All are zip files and would go thru cwm. If you get only to the Samsung logo, my experience has been a factory reset usually gets you past that and if that doesn't work flashing the stock rom with Odin does. And I'd flash the honeycomb rom and bring it back to they way I bought it, then upgrade to ics
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Tried the honeycomb step, still same problem
As for Booting to samsung screen .. i did format /system as suggested, so there will be no system to boot to i think

I'm at a loss, you've tried everything that has gotten me beyond the boot screen.
Anyone else have any ideas?
Sent from my SGH-I727

wamaOnline said:
Tried the honeycomb step, still same problem
As for Booting to samsung screen .. i did format /system as suggested, so there will be no system to boot to i think
Click to expand...
Click to collapse
I should mention something that has gotten me worried, i flashed a TWRP recovery to check if the touch would work there, but it didn't.
Not sure if i should be worried about HW now, or try another TWRP for instance? Or perhaps TWRP shares another flawed tab wide configuration with the Android image ?

It's not twrp, I use it on my tab and it Works fine. If you were the only one who has this problem I'd say hardware for sure. But at least one other person has the same problem after updating to ics. It seems like there something with the firmware interfacing with the touch screen.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

jd1639 said:
It's not twrp, I use it on my tab and it Works fine. If you were the only one who has this problem I'd say hardware for sure. But at least one other person has the same problem after updating to ics. It seems like there something with the firmware interfacing with the touch screen.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Then why is it still borked when reverting to hc?
Sent from my SAMSUNG-SGH-I727 using xda premium

Good question. One of the guys couldn't get the touch screen to work in twrp either. It sounds like a hardware issue but to have a few guys have the same problem after installing ics? I don't know? Something's doing it which I can't figure out

jd1639 said:
Good question. One of the guys couldn't get the touch screen to work in twrp either. It sounds like a hardware issue but to have a few guys have the same problem after installing ics? I don't know? Something's doing it which I can't figure out
Click to expand...
Click to collapse
yea i dont get how a rom flash could cause a hardware issue

orlandoxpolice said:
yea i dont get how a rom flash could cause a hardware issue
Click to expand...
Click to collapse
Think the other colleague did say he found someone elsewhere who resolved the problem by reverting to an older backup he had, which gives me hope that this is no hw issue
And this was my first time to flash any ROM without a backup first, thought a stock update would be fine !!
Can I use adb for instance to verify if it was a hardware issue,if so then any help is appreciated

wamaOnline said:
Think the other colleague did say he found someone elsewhere who resolved the problem by reverting to an older backup he had, which gives me hope that this is no hw issue
And this was my first time to flash any ROM without a backup first, thought a stock update would be fine !!
Can I use adb for instance to verify if it was a hardware issue,if so then any help is appreciated
Click to expand...
Click to collapse
Got it Reassembled and cleaned it and it worked

same prob, touchscreen not responding
wamaOnline said:
Got it Reassembled and cleaned it and it worked
Click to expand...
Click to collapse
I'm having this issue of the touchscreen not responding on my s2 now
You say you got it reassembled? What did you have to do to repair it
any help greatly appreciated
I have JB 4.1.2 and cwm 9.1 flashed
after reboot screen comes on but won't respond to touch, I can only access download and recobvery screens
I also have the phone not showing on computer when usb attached but am loading rom etc to ext sd card first and installing them from cwm

Got the maintenance center to disassemble it, clean the pins and reconnect the screen and then it worked
Sent from my LT26ii using xda app-developers app

[ROM] CM7-GBKernel .621

I Have created a CM7 rom for rooted 621 and it should a lot easier to use now that I have tested personally and everything works as it should no need for gapps as it has vendor.apk in it and it will update to playstore.
Flashing Instructions
1:Back-up always
2:full wipe
3:install rom via CWR or bootstrap
4:Gapps arent needed but you may flash just to be comfortable
5: reboot
6: leave me feedback
7: enjoy
Downloads
Rom: http://www.4shared.com/zip/PvWul1cI/KiladarsCM7GBKERNEL.html?
Gapps: http://www.4shared.com/zip/tDblkDjI/gapps-gb-20110828-signed.html?
Known Bugs:
Settings does not open working on it right now.
let me know what you guys think.
change log:
Settings updated should work now
I Have finally fixed the settings

will this work on gb.605?
Sent from my DROID RAZR using xda premium

I believe it should. I only have my 621. Flash at your own risk.
Sent from my DROIDX using xda app-developers app

ok I'll flash later then thanks
Sent from my DROID RAZR using xda premium

BADDINOROX99 said:
ok I'll flash later then thanks
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
If your scared that your phone may brick or boot loop remember to back up and if you need me to i can find you a tutorial to unbrick your device just for comfort

Kiladar said:
If your scared that your phone may brick or boot loop remember to back up and if you need me to i can find you a tutorial to unbrick your device just for comfort
Click to expand...
Click to collapse
I can't flash it yet because my computer is in the repair shop and I never do anything risky with my phones unless my computer is nearby
Sent from my DROID RAZR using xda premium

Okay. I wonder if anyone has tried this yet.
Sent from my DROIDX using xda app-developers app

I hope so it looks promising
Sent from my DROID RAZR using xda premium

Well Im very new at modding Droid X, but I have an important question...
Is the hdmi fully working?
Or is there any rom which make it work as it should?
I mean something like a mirror.
Thanks!

Downloading Now. I just hope it's for the rooted .621 Non-Milestone hack. The Milestone hack (for root) is .604.
Sent from my DROIDX using xda premium
Update:
First I tried it without gapps. Everything booted fine, but there was no market nor would accounts/ sync let me add Google account.
So, I rebooted into recovery, which worked fine, and flashed gapps.
This time on boot, I actually got the Droid X welcome screen, was able to put in Google info, and market initiator ran and updated.
After that everything worked fine.
Tested Bluetooth, Messages, Gps and Calls. Didn't get chance to try Wifi yet, but I'm sure it works since everything-else does.
The only thing that Would be better is an updated Superuser. The 1 included will NOT update SU Binary. I think it's the old edify binary. Even by updating Superuser in the market WON'T help. Although an easy fix is to get RootUninstaller and uninstall Rom Superuser, then download new 1 from the market and install.
Keep up the hard work. Nice Rom.

Finally, does this works for any other gb kernel besides .621?
Anybody please tell us!

Nope, but maybe yes
BADDINOROX99 said:
will this work on gb.605?
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Nope, but I may have a bad download as I forgot to check the Md5 sum before I flashed. Install was aborted. I can't try again right now because I have another phone to flash and have to go to bed early tonight.

And thank your for the review I've been waiting for a review like that I've created a couple roms and no one has have gave me so much input
Sent from my SGH-i917 using XDA Windows Phone 7 App

No prob Kiladar. I think if someone is going to comment on someones work, they should at least review it and be as informative as possible. It makes it easier
on the devs to look at potential probs/fixes too.
Oh yea, I also got to looking into your system/app folder in your zip. The vending.apk is Not in there, which i would say is why I had to flash the gapps. Just wanted you to know.
Also there is no "boot.img" (which is kernel right?) in the new dwnload.

Right, I will update OP saying to flash gapps rather then say not needed
Sent from my SGH-i917 using XDA Windows Phone 7 App

Beanerman said:
Downloading Now. I just hope it's for the rooted .621 Non-Milestone hack. The Milestone hack (for root) is .604.
Sent from my DROIDX using xda premium
Update:
First I tried it without gapps. Everything booted fine, but there was no market nor would accounts/ sync let me add Google account.
So, I rebooted into recovery, which worked fine, and flashed gapps.
This time on boot, I actually got the Droid X welcome screen, was able to put in Google info, and market initiator ran and updated.
After that everything worked fine.
Tested Bluetooth, Messages, Gps and Calls. Didn't get chance to try Wifi yet, but I'm sure it works since everything-else does.
The only thing that Would be better is an updated Superuser. The 1 included will NOT update SU Binary. I think it's the old edify binary. Even by updating Superuser in the market WON'T help. Although an easy fix is to get RootUninstaller and uninstall Rom Superuser, then download new 1 from the market and install.
Keep up the hard work. Nice Rom.
Click to expand...
Click to collapse
wifi works just fine with it, and I agree bout the updated superuser since you cant uninstall the one you have with it which means you also cant update to the new superuser because they are different volumes but over all nice ROM.:good:

thelangosta said:
Nope, but I may have a bad download as I forgot to check the Md5 sum before I flashed. Install was aborted. I can't try again right now because I have another phone to flash and have to go to bed early tonight.
Click to expand...
Click to collapse
I had it working on mine but my .605 was the .621/.605 deodexed hacked version cause I was on the .621 before I did the work around on the magic 5 route, originally I did the .604 work around but it should work on the .605 stock rooted, but then again I was also running the kernel for the .621 sooooo if the kernel is the key for running it maybe you cant.
Try another download, maybe you did get a bad DL

Other issues with phone
mbm262 said:
I had it working on mine but my .605 was the .621/.605 deodexed hacked version cause I was on the .621 before I did the work around on the magic 5 route, originally I did the .604 work around but it should work on the .605 stock rooted, but then again I was also running the kernel for the .621 sooooo if the kernel is the key for running it maybe you cant.
Try another download, maybe you did get a bad DL
Click to expand...
Click to collapse
I tried this again but, I think the real problem is with my microSD card. I have subsequently tried to flash other roms and have had other aborts as well. I know that the md5's on those checked out. I was able to flash a cm9 based rom and got it set up just fine. All this from the same card on the same phone. Sooo I am attempting to format the card just in case I have bad sectors or something.
Luckily my DX is no longer activated and just keeps me from killing my SGS3 with flashes.:silly:

thelangosta said:
I tried this again but, I think the real problem is with my microSD card. I have subsequently tried to flash other roms and have had other aborts as well. I know that the md5's on those checked out. I was able to flash a cm9 based rom and got it set up just fine. All this from the same card on the same phone. Sooo I am attempting to format the card just in case I have bad sectors or something.
Luckily my DX is no longer activated and just keeps me from killing my SGS3 with flashes.:silly:
Click to expand...
Click to collapse
I hear ya, I had the same prob with sd card so i formatted mine as well, problem was still there though. whenever i tried to install a rom from sd card via rom manager the problem was i kept getting the message saying waiting for sd cart to mount then it would say error bla bla bla sending log file to cwm ect ect ect.... i dont know exactally how i fixed that, all i know is i installed another rom, like cm7 or cm9 for instance and after that whenever i went to back up rom it worked fine ever since.... maybe something flashes over correcting the sd card problem when you install a rom... I know rom manager checks to verify the marker on sd card and thats what your problem is I believe.
Try doing this, try installing a rom cm7/cm9 without making a backup (i know you could lose everything if it fails but its the only way i know that fixed mine) after you have installed cm7/9 go to rom manager and hit the Backup Current Rom it should reboot you to cwm recovery and make an auto backup, if it does this without throwing up the waiting for sd card to mount error stuff and it runs the backup program and then reboots you it should fix your sd card problems.....

Review this rom
this is by far a ROM with the least lag by far i tried liquid ICS and plenty others don't know what it is but the lag is really minimal runs really smooth i only have this for like 3 hours but will update soon
pls hit thanks if i helped

boot looping when I update with Viperboy 1.1.0

I am rooted on a Sprint One and had stock HTC. Then downloaded the Viperrom 1.0.4 and had no trouble get it on, did not loose any of my settings or folders. Now when I download and try to run the viper 1.1.0 zip, it does the install and starts up shows my walpaper and icons appropriately, then crashes and constant reboots to the same point. Able to get on to recovery and reinstall the back up i had made with no rpoblems.
What do I need to do? If I wipe, what do i wipe? Have TWRP.
Will I loose all my settings and data?
Please help

Under advanced wipe select the first 4(dalvik,cache,system,data).
Then reflash the Rom.
You will lose settings.

Thanks, will try that in the morning.
Is there anyway we can save settings and restore them after upgrades?

aviatordoc said:
Thanks, will try that in the morning.
Is there anyway we can save settings and restore them after upgrades?
Click to expand...
Click to collapse
Htcs built in backup through dropbox works very well. It restores apps, settings, homescreens. About the only two things it doesnt restore are accounts, autorotate and lockscreen password
Sent from my HTCONE using xda app-developers app

youkosnake said:
Htcs built in backup through dropbox works very well. It restores apps, settings, homescreens. About the only two things it doesnt restore are accounts, autorotate and lockscreen password
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
yes but i also disables google backup

I fond HTCs better than googles. The only thing I manually use google sync for is contacts. And thats just force of habit.
Sent from my HTCONE using xda app-developers app

youkosnake said:
I fond HTCs better than googles. The only thing I manually use google sync for is contacts. And thats just force of habit.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
good to know, thanks

aviatordoc said:
I am rooted on a Sprint One and had stock HTC. Then downloaded the Viperrom 1.0.4 and had no trouble get it on, did not loose any of my settings or folders. Now when I download and try to run the viper 1.1.0 zip, it does the install and starts up shows my walpaper and icons appropriately, then crashes and constant reboots to the same point. Able to get on to recovery and reinstall the back up i had made with no rpoblems.
What do I need to do? If I wipe, what do i wipe? Have TWRP.
Will I loose all my settings and data?
Please help
Click to expand...
Click to collapse
Need to wipe before installing. In TWRP, hit Wipe>Swipe to wipe
gmentals said:
Under advanced wipe select the first 4(dalvik,cache,system,data).
Then reflash the Rom.
You will lose settings.
Click to expand...
Click to collapse
Do NOT do this. It will wipe everything including your internal SD card
Sent from my HTCONE using Tapatalk 2

I did the same thing as you. Mine got caught in a bootloop, I couldn't get the damn thing to force restart either. The bottom home & back key just kept flashing no matter how long I held it. I had to wait forever for the battery to die. I think something might be wrong with the restart fail safe HTC built in. So I relocked it, flashed back to stock, go to sprint store of course it reboots perfect every time. The people at the store are morons I hate going there. The guy says to me you just hold it down and the restart menu will come up. I'm like if the phone is frozen that doesn't work. None the less I don't expect them to replace something that is working. So I re-unlocked, cleared everything and installed latest build fresh works great haven't had any issue. I didn't back up either so I had to re set everything up which takes forever. I'm not a fan of restoring backups anyway as it can cause issues. I will be doing a nandroid next time and be more careful with dirty flashing. I always dirty flashed on MeanBean on my LTE without issues and Mike made it very clear when dirty update was not advised. In my opinion they shouldn't release a major update that will bootloop a phone over goo manger. It's still my fault but I didn't think twice about it when I tried to update viper. It still pisses me off that I have to fight with it to get the phone to reboot, the entire point of a fail safe is incase something goes wrong. It's the first time I have ever bootlooped a phone.

Do NOT do this. It will wipe everything including your internal SD card
Sent from my HTCONE using Tapatalk 2[/QUOTE]
I do this everytime I flash a new Rom and it doesn't wipe my internal SD...

Thanks all, I am just where I was. so many opinions and would like to have a concensus.

It won't wipe internal unless you specifically check it in advanced. Never wipe internal, but davlic, cache, data and system are fine and constitutes a full wipe..you should always wipe that way when trying different roms or going to a new base. Or use a superwipe script to make things easier.
Sent from my HTCONE using xda premium
---------- Post added at 12:28 PM ---------- Previous post was at 12:27 PM ----------
http://forum.xda-developers.com/showthread.php?t=2237021
[TOOL]smw6180 Superwipe
Sent from my HTCONE using xda premium

Mrlakadaddy is absolutely correct.
Consensus achieved
Sent from my EVO using xda premium

OK here it goes. Went to advanced, wiped all except internal. will see how it goes.

scottspa74 said:
Mrlakadaddy is absolutely correct.
Consensus achieved
Sent from my EVO using xda premium
Click to expand...
Click to collapse
What's up Scott did you get a One?
Sent from my HTCONE using Tapatalk 2

All went well and am on the new base. Only, I lost all my settings and it is such a pain to recreate all the screens, shortcuts, sign ons and accounts...
Thanks to all.

same problem
ive had the same problem, i actually had to use the ruu to get back to stock, unlocked it again s-off rooted and no matter what i do everytime i install any custom rom it goes into bootloop. ive tried every rom on here i cant even get viperrom to fully boot up. looking thru all the forums nobody has a clear answer as to why this is happening.

im stuck in boot loop after the viper rom and i just got it yesterday .. i dont know what to do at this point . when it does boot it ask me for the wifi login and fails says poor connection when its right next to me

Boot Loop
I'm also stuck in boot loop. I've done research and tried all kinds of stuff with no luck. This is what I get...
Phone boots
I get the notification bar and a black screen
Can't do anything with that.
After about a minute, it reboots.
Can anyone help with this? I have the 1.31 version. Clearing cache/data/delvik does nothing for me.
Can someone help me get it back to stock, or at least usable?
Thanks in advance.

erickr5 said:
ive had the same problem, i actually had to use the ruu to get back to stock, unlocked it again s-off rooted and no matter what i do everytime i install any custom rom it goes into bootloop. ive tried every rom on here i cant even get viperrom to fully boot up. looking thru all the forums nobody has a clear answer as to why this is happening.
Click to expand...
Click to collapse
Are you wiping before you flash a new rom?
matt406regal said:
im stuck in boot loop after the viper rom and i just got it yesterday .. i dont know what to do at this point . when it does boot it ask me for the wifi login and fails says poor connection when its right next to me
Click to expand...
Click to collapse
Same question are you wiping before flashing a new rom?
huebenthal said:
I'm also stuck in boot loop. I've done research and tried all kinds of stuff with no luck. This is what I get...
Phone boots
I get the notification bar and a black screen
Can't do anything with that.
After about a minute, it reboots.
Can anyone help with this? I have the 1.31 version. Clearing cache/data/delvik does nothing for me.
Can someone help me get it back to stock, or at least usable?
Thanks in advance.
Click to expand...
Click to collapse
RUU following this guide. http://forum.xda-developers.com/showthread.php?t=2390821
All of you should really start your own topic so people see it and help you.