Related
Hey all, I'm currently in RA after flashing the recovery image , and I'm trying to install the FRESH rom on there but for some reason when I try to "Flash zip from sdcard" it's telling me "No zip files found." Why is that? I have the whole zip folder placed in the main SD card, so why is it telling me it's not found?
BOOGIE_BOTZ said:
Hey all, I'm currently in RA after flashing the recovery image , and I'm trying to install the FRESH rom on there but for some reason when I try to "Flash zip from sdcard" it's telling me "No zip files found." Why is that? I have the whole zip folder placed in the main SD card, so why is it telling me it's not found?
Click to expand...
Click to collapse
I responded to you on http://GeekFor.Me, but the reason is because RA looks in the root of sdcard, the zips can't be inside of any folders.
So does that mean I have to take out all the individual files and place them directly into the root of the sdcard? Because I just basically copied the download folder and dropped it into the root. Thanks for the reply
BOOGIE_BOTZ said:
So does that mean I have to take out all the individual files and place them directly into the root of the sdcard? Because I just basically copied the download folder and dropped it into the root. Thanks for the reply
Click to expand...
Click to collapse
You need to leave the files in a .zip, but yea that zip needs to be on the root of the sdcard.
The only file you need to install the rom is fresh-cdma-hero-20d.zip (for fresh rom 2.0d). Any other zips are just addons or tweaks or whatever they may be.
flipzmode said:
You need to leave the files in a .zip, but yea that zip needs to be on the root of the sdcard.
The only file you need to install the rom is fresh-cdma-hero-20d.zip (for fresh rom 2.0d). Any other zips are just addons or tweaks or whatever they may be.
Click to expand...
Click to collapse
Hmm, I'm on a Mac and maybe it's me but the link I download from gives me an actual folder rather than a zip. And when I rename the folder to a zip, it gives an error. Is there a mirror link to download an actual zip folder?
Boogie when you download it dont opening after it finishes downloading .. just use the finder to navigate to where its at and then copy that to your sd .. when you open it on a mac it will automatically create the extracted folder .. hope this helps ...
Sounds like your using Safari to download it. To make this easier in the future go to Safari > Preferences > General and make sure that "Open safe files after downloading" is NOT check-marked.
Safari is unpacking the zip file for you. The file you want is in your trash bin, drag it to the root of your SD card and that's it..
Ok I'm gonna give it another go. Since I made it all the way through to the RA stage, there's no reason I shouldn't be able to flash the rom is there?
Thanks for all the help everyone I finally got it to flash the FRESH rom, but once I rebooted it, it's still in the "HTC" branded screen. Is it loading? It's not going anywhere but this screen, although I know it's doing something because the animation shine is moving.
BOOGIE_BOTZ said:
Thanks for all the help everyone I finally got it to flash the FRESH rom, but once I rebooted it, it's still in the "HTC" branded screen. Is it loading? It's not going anywhere but this screen, although I know it's doing something because the animation shine is moving.
Click to expand...
Click to collapse
After flashing a new ROM, it can take up to 10 minutes or so to load.
Nice Everything is all good! Now my last question is how do I get the removed apps from the ROM back onto here? I actually prefer to have some of those programs back onto the phone.
BOOGIE_BOTZ said:
Nice Everything is all good! Now my last question is how do I get the removed apps from the ROM back onto here? I actually prefer to have some of those programs back onto the phone.
Click to expand...
Click to collapse
There is a link in the release notes to download all the removed apk's from Fresh Rom. You will then need to use adb push to push them back to /system/app. Search for how to setup adb on a mac as I honestly don't know.
im trying to flash paragon rc5. i follow the instructions, but when i go to choose sd card... and click on paragon.zip as file to use in clockwordmod recovery manager, it loads okay, then says replacing recovery manager and reboots. what did i do wrong?
To flash rom you should boot into recovery, select ingersoll zip from sd, choose zip, select parogon, confirm, done
Well when i do, it acts like its going to install, but then says "replacing recovery manager with clockwork..." then exits and reboots into the normal recovery screen.
Each time i get into recovery it is the normal one. I have to go to reinstall packages to get to the clockworkmod one. Something tells me thats not right.
Could this have happened because i installed rom manager and it didnt say i needed it?
Sounds like you are flashing an update.zip to get clock work recovery. i think you need to confirm you downloaded the correct file
What happened was i installed rom manager, got recovery manager through it, then downloaded paragon and its update.zip file. So am i basically flashing the recovery manager right now?
Sounds like it, are you on stock?
Paragon rom zip should be like 170mb in size
Rooted, but otherwise stock. Have already wiped all my data on it in preparation.
What im trying to do is this- have update.zip and paragon.zip in main internal sd folder. Go into recovery---reinstall---then it loads clockwork, then go to from sd---choose--- and if i pick paragon.zip it still does it.
let me clarify this, basically you do not need rom manager here.
1. download the update.zip and put it in your sdcard root folder;
2. download the rom file (170mb one) and put it in your sdcard; not necessary to be the root folder;
3. suppose you are on the stock rom; shut down your phone and use key combo to get into recovery mode;
4. apply the changes (i remember it is the second option), you may need to do it twice. you should now be in the cwm;
5. use the menu in the cwm to browse and install the rom file
6. reboot your phone. done.
Boot phone up normally. Delete paragon file you have. Redownload. Like I said the file should be like 170mb.
Update.zip goes in the root folder? Where is that? I couldnt find it anywhere....
The file is about 170mb. I know thats correct, im thinking since i had already installed cwm i moght have screwed up.
when you select reinstall packages you should go into green recovery/clockwork recovery.
If that works boot phone, open rom manager, select install rom from sd, select paragon
check the attached file.
Thats the update.zip i have. Now where do i put the damn thing?
Your internal sd card. Dl to phone, go to my files app, open dl folder find file select copy, click paste. Should now be where you need it
mm01 said:
Thats the update.zip i have. Now where do i put the damn thing?
Click to expand...
Click to collapse
copy to your sdcard root directory.
mm01 said:
Thats the update.zip i have. Now where do i put the damn thing?
Click to expand...
Click to collapse
/sdcard
10char
wonner said:
/sdcard
10char
Click to expand...
Click to collapse
ok, ok, i will let you guys help him ... lol
I feel.....stupid. Like, asking if a mac gets bluescreens stupid. I renamed the files on my pc alot, and upon closer inspection, discovered... *Ahem* xp had decided to rename the cwm fole the same as the rom file (yeah, lets go with that...). So i was flashing cwm.
Im going to let my battery charge and then try it. Will post results tomorrow morning. Thanks for all the help guys!
mengbo said:
ok, ok, i will let you guys help him ... lol
Click to expand...
Click to collapse
Sorry, I didn't mean to step on your toes. We all posted at the same time.
Got it all up and running. Works infinitely many times better than it did stock. Got a gps lock in about 5 seconds. Im loving this phone again.
I tried installing this ROM
http://forum.xda-developers.com/showthread.php?t=880859
I got the phone rooted, organized Rom Manager and got the ClockworkMod Recovery going.
I placed the zip file for the mod in the root of the phone memory.
The issue is that upon booting into clockworkmod, I do not get any option to flash the rom, only the regular options such as reboot etc.
Any idea why this wouldn't show?
I am using the "Install from SD card" in rom manager, tried a few other roms same issue. It seems as though the CWM isn't seeing the zip files in the root of the phone memory Sad I even tried renaming the file update.zip
woodyear99 said:
I tried installing this ROM
http://forum.xda-developers.com/showthread.php?t=880859
I got the phone rooted, organized Rom Manager and got the ClockworkMod Recovery going.
I placed the zip file for the mod in the root of the phone memory.
The issue is that upon booting into clockworkmod, I do not get any option to flash the rom, only the regular options such as reboot etc.
Any idea why this wouldn't show?
I am using the "Install from SD card" in rom manager, tried a few other roms same issue. It seems as though the CWM isn't seeing the zip files in the root of the phone memory Sad I even tried renaming the file update.zip
Click to expand...
Click to collapse
you arent supposed to rename the rom file to update.zip
when you flash clockwork recovery manager it puts an update.zip on your /sdcard for you. you have to select reinstall packages let it reboot back to recovery then select reinstall packages again.
I know. I did not rename the file initially. I put the original rom zip file in the root directory. I use the install from memory card option on rom manager but when it reboots into the recovery area I see no option to use the rom file.
root directory? u mean very "root"(/) right?
have u try to put the rom in the home directory? path is /mnt/sdcard
If its a blue screen than u have to hit reinstall packages if your in the green screen then under where it says reboot there should be a choice that says install zip from SD card pick that one and u should then be able to see your rom.
Sent from my Supernova laced Captivate using XDA App
Reinstall packages a time or two...
Hey there =)
I'm a proud owner of a Optimus 2x. I've rooted my phone and flashed the "stock rom" ( From this topic) and downloaded 2 Custom ROMs ( Thisone and another one from a dutch forum).
However, when I go to CWM and do a Backup and complete wipe, when I wan't to flash the rom (as said how to do it in the topics) I get things like this:
"Finding udate package. . .
Opening update package. . .
E:Can't open /sdcard/update.zip (bad)
Toggle signature verification: on/off
Toggle script asserts: on/off
I tried all possible options.
When I got the signature verification ON, then CWM says the signature is not verified
I worked with both V10A and V10B, both don’t work
What do I do wrong?
Killastyle said:
Hey there =)
I'm a proud owner of a Optimus 2x. I've rooted my phone and flashed the "stock rom" ( From this topic) and downloaded 2 Custom ROMs ( Thisone and another one from a dutch forum).
However, when I go to CWM and do a Backup and complete wipe, when I wan't to flash the rom (as said how to do it in the topics) I get things like this:
"Finding udate package. . .
Opening update package. . .
E:Can't open /sdcard/update.zip (bad)
Toggle signature verification: on/off
Toggle script asserts: on/off
I tried all possible options.
When I got the signature verification ON, then CWM says the signature is not verified
I worked with both V10A and V10B, both don’t work
What do I do wrong?
Click to expand...
Click to collapse
Try to select zip file from SD Card. If you have renamed the ROM to update.zip this should work fine, if that's the case the update.zip is corrupted.
I’ve already tried that to, doesn’t work. I suppose that a ‘’physical’’ MicroSD means one you can touch, so a real one (I got one and placed the ROMs on the MicroSD). I also tried making the .zip files a ‘’Read Only’’. I just keep getting the same screen that it doesn’t work.
And is there also a difference between a NANDROID backup and the backup I do in CWM?
Killastyle said:
I’ve already tried that to, doesn’t work. I suppose that a ‘’physical’’ MicroSD means one you can touch, so a real one (I got one and placed the ROMs on the MicroSD). I also tried making the .zip files a ‘’Read Only’’. I just keep getting the same screen that it doesn’t work.
And is there also a difference between a NANDROID backup and the backup I do in CWM?
Click to expand...
Click to collapse
Yes, you need a physical SD card. See if it gets mounted in CWM. Nandroid backup is the backup you do from the backup/restore menu in CWM.
If you keep getting the same screen you have not selected the zip file that contains the ROM. Your CWM is looking for update.zip that should reside on the root of your physical SD card. If you select choose zip you can navigate to the rom zip file you downloaded.
How can I check if it gets mounted in CWM? I can find the update.zip (I renamed the zip file myself to update.zip) When I check in Astro I go to "sdcard/_ExternalSD" and there is on the root of the external SD the update.zip package..
However, I've done a backup back to the standard rom and now I see the LGE-Version is back to LGP990-V10a. Here are all my specs:
Basebandversion: 1035.21_20110223
Kernel: 2.6.32.9
Buildnumber: FRG83G
LGE: LGP990-V10a .
Can you maybe explain to me step by step how I can do a custom rom again? I think I have to start from scratch again?
Killastyle said:
How can I check if it gets mounted in CWM? I can find the update.zip (I renamed the zip file myself to update.zip) When I check in Astro I go to "sdcard/_ExternalSD" and there is on the root of the external SD the update.zip package..
However, I've done a backup back to the standard rom and now I see the LGE-Version is back to LGP990-V10a. Here are all my specs:
Basebandversion: 1035.21_20110223
Kernel: 2.6.32.9
Buildnumber: FRG83G
LGE: LGP990-V10a .
Can you maybe explain to me step by step how I can do a custom rom again? I think I have to start from scratch again?
Click to expand...
Click to collapse
First off, if you install MCR Fr12 then go and update your baseband to the newest one. Follow these instructions: http://forum.xda-developers.com/showthread.php?t=1008070
Download the MCR Fr12 again to ensure that it's not corrupted, check the MD5 of the zipfile and compare it with the one stated in the first post.
Put the zipfile on the external SD card, no need to rename it.
Reboot into CWM, and (not having my phone here, so maybe I don't remember the exact phrases) advanced menu/toggle signature check off and wipe all data (cache/user/dalvik)
install zip from SD card (not apply update.zip) and navigate to the downloaded rom and press power to select it. This should install MCR Fr12 without problems.
Hope it helps.
Edit: Are you able to browse the SD from CWM ? If not try formatting the SD card in your PC as FAT(32).
I haven't done it this way before, so I'm gonna check it out
And I think I'm able to browse the SD from CWM, because when I do ''Install zip from SD card" i can navigate trough the maps I created and the update file is on the root. I will try this asap ! I hope this works thx
edit: How can I check the MD5 of the zipfile?
The: E:Can't open /sdcard/update.zip (bad)
can refer to a corrupted update.zip so try and download it again
Tayutama said:
The: E:Can't open /sdcard/update.zip (bad)
can refer to a corrupted update.zip so try and download it again
Click to expand...
Click to collapse
+1
Had this error many times on my old Hero
Tayutama said:
The: E:Can't open /sdcard/update.zip (bad)
can refer to a corrupted update.zip so try and download it again
Click to expand...
Click to collapse
So that means that all the 4 different times I downloaded the file it has gone corrupted?
Killastyle said:
So that means that all the 4 different times I downloaded the file it has gone corropted?
How can I check the MD5 files?
Click to expand...
Click to collapse
Maybe
Try searching for winMd5SumPortable, nice tool to check MD5 sums.
Killastyle said:
So that means that all the 4 different times I downloaded the file it has gone corropted?
How can I check the MD5 files?
Click to expand...
Click to collapse
Well it might refer to a corrupted download
What is the size of the file after you downloaded it?
Also regarding checking MD5 i use a program called HashTab.
It's a a small program that adds a tab when you check a files properties.
EDIT: also that error can also just be it looks for a file called update.zip but can't find it.
In windows you might see the file as update.zip but in reality it's called update.zip.zip and that also courses that error.
If you haven't renamed it, then choose install zip from SD card instead of install update.zip in CWM and then select the file
And still it doesn't work. I've checked the MDA on the file where I downloaded it to, then it's correct. However, as soon as I copy/paste or cut/paste the file to my MicroSD root, the MDA doesn't match anymore. Can that be the reason?
I might have the solution. When I do a full wipe via CWM, the base version goes back to V10a, maybe that is the solution. I will download the file directly to the MicroSD right now. I let you guys know if its working
Edit: omfg, I found out, I think it's working right now. I formatted and mounted the MicroSD via CWM, copied the file to the MicroSD and the MD5 was now still the same. Right at this moment my phone is writing it to the system. So it was probably the MicroSD not correctly formatted or such... Thx for all the help guys
Killastyle said:
I might have the solution. When I do a full wipe via CWM, the base version goes back to V10a, maybe that is the solution. I will download the file directly to the MicroSD right now. I let you guys know if its working
Edit: omfg, I found out, I think it's working right now. I formatted and mounted the MicroSD via CWM, copied the file to the MicroSD and the MD5 was now still the same. Right at this moment my phone is writing it to the system. So it was probably the MicroSD not correctly formatted or such... Thx for all the help guys
Click to expand...
Click to collapse
is there any update to this i also get this kind of error/
Hey guys,
i wrote a small tutorial for all this people which have the galaxy s i9010 ( its like the captivate only for german market [armani] ) and want install Cyanogenmod with 100% WORKING GPS.
That was really the main problem, but i solved it with the help of this forum.
please extract all my files, i had to compress them but you cant use them as zip!
First of all go back to stock with your phone. You can download all files from http://www.sammobile.com/showthread.php?t=20 but pay attention:
If you dont use the following files, your phone wont work.
Donwload BOTH Firmwares and choose these 3 files for flashing with Odin:
-GT-I9010-CSC-MULTI-OXA902407.tar.md5 (444,851 mb) --> CSC
-I9010XXKB2-REV00-ALL-low-CL909299.tar.md5 (279,501 mb) --> PDA
-MODEM_I9010XXJK9_REV_00_CL737172_SIGNED.tar.md5 (12,291 mb)--> PHONE
Now you are on stock and everything is working fine but you have Android 2.2
Download the latest Cyanogenmod for Samsung CAPTIVATE on http://www.cyanogenmod.com/
- extract all files into a new folder
- replace the existing modem.bin with the JK9-Armani-modem (same name Modem.bin)
- open with notepad and edit the file META-INF/com/google/android/updater-script
- change all entries “SGH-I896” to GT-I9010 [found this solution here] http://forum.xda-developers.com/showpost.php?p=15822109&postcount=67
- save the file and compress via 7-zip to a new zip-file ( mark all files and folders --> right-click --> 7-Zip --> add to XXX.zip
- put this new zip-file into your sdcard
- Now root your phone via "onecklickroot" ( enable USB-debug and dont forget restart after that) http://forum.xda-developers.com/showthread.php?t=803682
- replace this 3e_recovery file with the existing in System/Bin
- install Rom-manager and install clockworkmod (choose samsung captivate)
- reboot into recovery menu and press 2 times "reinstall packages", after that you start into the clockworkmod
- choose install zip from sd and choose your created zip-file
- copy stock gps files to your internal sd
- start root-explorer and copy all files (the folder gpsd to system/bin
the both files to system/etc)
-reboot phone
OPTIONALLY
you can install "gapps", if you need apps like google-market. You do it same like installing Cyanogenmod, reboot into recovery, install from sd etc.http://goo-inside.me/gapps/
you can use the really nice HTC-keyboard, just put the two keyboard files on your sd card, install them and choose settings/language and keyboard HTC_IME
to activate the keyboard go to sms and press a long time into the text field, now you can choose your input method
Have fun and enjoy your galaxy s I9010 with Android-Version 2.3.7
previously it was very difficult to flash I9010, this post was like real itinerary for me. ThankY!
Though even here i've made a mistake
At the 1st step while flashing with Odin DONT MARK Re-Partition as there is no Pit
No Problem , i know this phone is really difficult to flash back to stock or flash a rom with working GPS
I forgot to upload the PIT, if you need it take it from here.
Greetz from Germany
something seems to be going wrong..
it keeps telling it is updating but it doesnt proceed anymore.
Maybe this is because i cant go back to the original stock rom coz the link is broken (and i dont fully understand th explaination with the 3 files and what to do.
I have a stable andromeda 3 build running but my gps isnt working.
I already copied the gps files into their destination folders(and it asked me to replace so i did this properly).
Should my gps work when i did this or should i take additional steps to get it running?
Thanks in advance
seems like i only miss the 'phone' file , the rest i found via google on the samware site , only the phone file (and the pit , but that one is here already) i still dont have , anyone can help?
Hey yoshiwa,
you need to download all files you can get for samsung i9010 on the samfirmware site. After downloading and extracting you have 5 files, but you only need the three i posted. Its really recommend that you flash back to stock before flashing a new rom.
armani26 said:
Hey yoshiwa,
you need to download all files you can get for samsung i9010 on the samfirmware site. After downloading and extracting you have 5 files, but you only need the three i posted. Its really recommend that you flash back to stock before flashing a new rom.
Click to expand...
Click to collapse
We could install gingerbread bootloader to our I9010 to install custom GB roms?
- replace this 3e_recovery file with the existing in System/Bin
Click to expand...
Click to collapse
Sorry this is the only thing i did not understand?
yoshiwa said:
something seems to be going wrong..
it keeps telling it is updating but it doesnt proceed anymore.
I have the same problem.
Click to expand...
Click to collapse
@MikeFRG
in your folder System/Bin exist a file named recovery. You must overwrite it via root-explorer with the new recovery-file (the modded 3e_recovery file )
@ erycx and szika87
you dont need any bootloaders, just download Odin put in the right fields the right files. You need phone, CSC, PDA, and the small pit file... and it works
Thanks man! It really does work for me. CM7 & CM9
Thank you. It work for my 9010 ARMANI. First I've installed th CM7 and used it for a month without any trouble. Now I used your manual to do the same with CM9. Really cool. It seems to be ok.
Hello.
I flashed a I897 Stock GB ROM on my Armani and my phone modem is not working anymore.
Can you please help?
bbogdanmircea said:
Hello.
I flashed a I897 Stock GB ROM on my Armani and my phone modem is not working anymore.
Can you please help?
Click to expand...
Click to collapse
The whole instructions are in the OP, read it, understand it and follow it.
Thanks, now I am back on I9010 stock.
Can you confirm that all the file links that you posted are working?
I will try and download all files and follow the steps.
Now after going through I897 without phone modem, then bootloop, the back to Armani I can say that I got some experience with Odin and
flashing.
Anyhow do you have any idea why on ROOTED 2.2 ROM Manager will not flash the Clockwork even if it says that it is successfull?
Well now with stock 2.2 and factory reset and everything wipe the phone seems to be moving really fast compared to before I started the whole process.
What can you say about the Cyanoged, how is it working in terms of speed and lagfix?
Thanks!
Will get back.
PS: Now that I looked into the OP I saw that still a Clockwork in needed for installing Cyanogen, but I cannot install Clockwork so I cannot follow your instructions.
Is there any other way to install custom recovery except the ROM Manager application?
bbogdanmircea said:
Thanks, now I am back on I9010 stock.
Can you confirm that all the file links that you posted are working?
I will try and download all files and follow the steps.
Now after going through I897 without phone modem, then bootloop, the back to Armani I can say that I got some experience with Odin and
flashing.
Anyhow do you have any idea why on ROOTED 2.2 ROM Manager will not flash the Clockwork even if it says that it is successfull?
Well now with stock 2.2 and factory reset and everything wipe the phone seems to be moving really fast compared to before I started the whole process.
What can you say about the Cyanoged, how is it working in terms of speed and lagfix?
Thanks!
Will get back.
PS: Now that I looked into the OP I saw that still a Clockwork in needed for installing Cyanogen, but I cannot install Clockwork so I cannot follow your instructions.
Is there any other way to install custom recovery except the ROM Manager application?
Click to expand...
Click to collapse
ROM Manager doesn't support the Captivate. You'll need to flash a custom kernel using Odin (speedmod for 2.2). The only thing I dunno is if it's compatible with the I9010.. But before doing so, you wanna do all the other steps with CM (changing the updater.script and such) and have it on the root of your internal.
After flashing speedmod, you'll be booting directly in recovery to flash the modded CM. Don't forget to grab the Gapps.
It would be really great if you:
1.put link to speedmod kernel and how to flash it on stock 2.2
2.put a link to the modified zip CM archive for I9010
The guide on how to do it.
For now I will wait for these files and a complete guide, I don't want to mess my I9010 again.
I got last CM and tried to modify updater.script, I replaced I896 with I9010, then I observed
I897 also. Should also I897 be replaced to I9010.
Wouldn't it be better if you could post all the modified files that needed to be put into the zip,
or the full zip for the Armani?
Thank you and waiting for the files and steps if you would be so generous.
bbogdanmircea said:
It would be really great if you:
1.put link to speedmod kernel and how to flash it on stock 2.2
2.put a link to the modified zip CM archive for I9010
The guide on how to do it.
For now I will wait for these files and a complete guide, I don't want to mess my I9010 again.
I got last CM and tried to modify updater.script, I replaced I896 with I9010, then I observed
I897 also. Should also I897 be replaced to I9010.
Wouldn't it be better if you could post all the modified files that needed to be put into the zip,
or the full zip for the Armani?
Thank you and waiting for the files and steps if you would be so generous.
Click to expand...
Click to collapse
I don't have a I9010 so Idk much about it. I'm only using the search function (as you should) to find the information I provided you with.
No, I don't have time to get the CM10 zip and change all the script but it's really easy to do. Just search all the SGH-I896 and SGH-I897 and replace them with SGH-I9010. Easy enough.
Speedmod kernel can be found using the search function in the Dev section.. Get the .tar version of it as you will be flashing it with Odin.
As for CM, the whole instructions are already in the OP, if you want a link, I'll just link the OP...
Friendly advice: Go read and understand what you're doing otherwise you'll end up with a bricked phone.
Ok so I will ask more questions until I get it right:
- replace this 3e_recovery file with the existing in System/Bin
- install Rom-manager and install clockworkmod (choose samsung captivate)
- reboot into recovery menu and press 2 times "reinstall packages", after that you start into the clockworkmod
Will these steps work if I dont install the speedmod kernel? Are these steps going to get me the clockwork recovery?
Can I pack the files also with Total Commander zip utility, or I have to use 7zip?
I downloaded cm-10.0.0-captivatemtd
I modified the updater script, I will post it here, can you check that this is ok:
Hello.
Back with a feedback about your instructions and a problem that I had:
I did the following steps:
1.I downloaded latest cm10 and decompressed to a folder
2.I copied the modem.bin that you provided and the updater.script that I posted earlier and then compressed back with 7zip, copied the zip to
my sdcard
3.I copied the recovery file on System/bin with Root_explorer
4.I installed ROM Manager and flashed Clockwork
5.I rebooted 2 times and did reinstall packages, then after that I got to the clockwork recovery
6.I selected install sdcard from zip and selected the image that I modified
The install then started but it halted to an error related to update.zip, it kept showing an option that said to select update.zip,
or some other options, something with adb and so on...
I kept on selecting the cm.zip but it kept on showing the error with update.zip, I selected update.zip but still it showed off the error.
From what I saw on the screen, the error was related to what it is checked in the updater.script, cm is looking for GT-i9010 but in
update.zip you have only captivatemd or something like that...
Are you sure there is no need of an modified update.zip archive on my sdcard too???
After this I got the battery out, put in on Download mode and flashed back to the Armani firmware, now it is back and running,
but I am so sad that I couldn't install CM10.
If you have any ideas why it didn't work please get back with some info, also can you check the updater.script that I posted or better that this,
can you post a modified working cm archive for Armani ???
Thanks a lot!