Hi people,
Have you seen samfirmware site lately?? They now recommend NO PIT FILES FOR EVERY ROM from Eclier to latest JPX. I think it makes sense. Our phones already come with a pit suited best for them, we actually dont need to do it again.
Imagine re-partitioning your hard-drive every time you want to install linux or windows. We actually don't do that, The max we do is format 1 drive.
This topic doesn't belong in Dev, & can be moved to an appropriate location once this issue has been sorted out.
Thanks.
Update :
1. SEA (South East Asia) is one region where you require to re-partition with a 512 pit if you want to flash other region ROMs.
PS : All the partitions of our SGS are formatted anyway when we flash a FW through Odin.
EDIT : I have had to use a 512 PIT twice when I downgraded from froyo to eclier. Without that I was getting error. Some developer may shed some light on that.
EDIT 2 : I remember that happened because I followed wrong steps & had flashed 803 PIT. I had to reflash 512 to come out of it.
I don't know ragin.
The table with the firmware on samfirmware is still containing PIT-files.
Exeptions are the first 13 firmwares.
Even JPU and JPX need a PIT file.
But thats only how i read the table!
LaurensJ said:
I don't know ragin.
The table with the firmware on samfirmware is still containing PIT-files.
Exeptions are the first 13 firmwares.
Even JPU and JPX need a PIT file.
But thats only how i read the table!
Click to expand...
Click to collapse
I mean this page where they have published their ROMs for downloading.
http://www.samfirmware.com/WEBPROTECT-i9000.htm
76 ROMs published, all with the same note '1 file select NO .PIT'
That includes JPU & JPX.
If your phone is already formatted with 512.pit you can flash any ROM which works on 512.pit without selecting a PIT file and without selecting repartition.
ragin said:
I mean this page where they have published their ROMs for downloading.
http://www.samfirmware.com/WEBPROTECT-i9000.htm
Click to expand...
Click to collapse
Yes i mean that page as well (with the table).
Its also say's:
Please when you have only one file SKIP RE-PARTITION!
Use only .PIT files if you have 3 files!
So the last column of that table i interpret as using no PIT file ONLY when you have one file. But if the you update 3 files you need a PIT-file.
izibi said:
If your phone is already formatted with 512.pit you can flash any ROM which works on 512.pit without selecting a PIT file and without selecting repartition.
Click to expand...
Click to collapse
Exactly my thought, should we all update our guides & tell everyone, NO PIT to be used?
A lot of people get confused over pit, & a lot of guys have faced problems too.
PS : I have International SGS, & I think they all come pre-partitioned with 512.
PIT files are only ever used when you wish to repartition, which is rarely necessary. There has been a lot of confusion in regards to this as in the past samfirmware was telling users to select a PIT file without repartitioning, which does nothing. Odin doesn't really make this clear either. I have tried to make this clear with Heimdall Frontend by only allowing the selection of a PIT file when repartitioning.
LaurensJ said:
Yes i mean that page as well (with the table).
Its also say's:
Please when you have only one file SKIP RE-PARTITION!
Use only .PIT files if you have 3 files!
So the last column of that table i interpret as using no PIT file ONLY when you have one file. But if the you update 3 files you need a PIT-file.
Click to expand...
Click to collapse
One file means a high level package, 3 files means a middle level package, both contain the same information. No difference at all. Richthofen has helped us a lot by converting a lot of high level packages to middle level ones & made it safer to flash because they dont contain boot loaders.
PS : No boot loaders, safer to flash.
ragin said:
One file means a high level package, 3 files means a middle level package, both contain the same information. No difference at all. Richthofen has helped us a lot by converting a lot of high level packages to middle level ones & made it safer to flash because they dont contain boot loaders.
Click to expand...
Click to collapse
OK.... Learned something new today. Thanks.
First- thanks for the clarification. For a newbie all this flashing process is unclear. Now I know I don't have to select a PIT file.
Second- Is it important to have CSC file? In Nokia you had to change your product code to be able to flash different firmwares. Is this the same in SGS?
Thanks!
bomba6 said:
First- thanks for the clarification. For a newbie all this flashing process is unclear. Now I know I don't have to select a PIT file.
Second- Is it important to have CSC file? In Nokia you had to change your product code to be able to flash different firmwares. Is this the same in SGS?
Thanks!
Click to expand...
Click to collapse
I am just an observer. I hope some real developers will really look into the matter & clarify things.
For SGS, you can flash any official firmware with a reg-hack, dont need to change the CSC for it
@ragin,
Not true, if you come from SEA region, pit513 is needed if your rom is from the Europe or US region, else there will be an error.
This apply as well, vice-versa.
Sent from my GT-I9000 using XDA App
I think repartition is necessary when lagfix problem happens, for example.
Sometimes we forgot the unlagfix before running new Roms on Oddin. In this cases repartition and pit flie, may fix the broken partition. Am i right?
criscan said:
I think repartition is necessary when lagfix problem happens, for example.
Sometimes we forgot the unlagfix before running new Roms on Oddin. In this cases repartition and pit flie, may fix the broken partition. Am i right?
Click to expand...
Click to collapse
Lagfixes dont alter partitions. Or am I wrong? They only change the file systems.
g00ndu said:
@ragin,
Not true, if you come from SEA region, pit513 is needed if your rom is from the Europe or US region, else there will be an error.
This apply as well, vice-versa.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Do you have to do it everytime? Since you already have a phone thats partitoned with 513.
India is SEA? I haven't used 513 ever.
ragin said:
Do you have to do it everytime? Since you already have a phone thats partitoned with 513.
Click to expand...
Click to collapse
Well, whenever I switched firmwares between the regions, yes, I need to. From DXJG4 to JP3, and from JP3 back to DXJPA.
No, SEA refers to Singapore, Malaysia, Thailand, Vietnam, Philippines, and it is also not the same as Hong Kong, Taiwan and China, that region has the prefix of ZS.
Sent from my GT-I9000 using XDA App
g00ndu said:
Well, whenever I switched firmwares between the regions, yes, I need to. From DXJG4 to JP3, and from JP3 back to DXJPA.
No, SEA refers to Singapore, Malaysia, Thailand, Vietnam, Philippines, and it is also not the same as Hong Kong, Taiwan and China, that region has the prefix of ZS.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
SO, SEA (South East Asia) is one region where you require a 512 if you want to flash other region ROMs.
Thats a start.
Is there a way to know how my device is partitioned right now (512,513,803)? any app to show this?
I have a phone from Thailand (so, 513?) and would like to flash firmware of another region (probably 512).
I think this is how re-partition and pit files work:
1. Pit files are only needed if you tick the re-partition box.
2. Re-partitioning reformats partitions back to rfs. (Not so sure about this.)
3. When you flash without ticking re-partition, odin overwrites the files without reformatting. This is where not disabling lagfixes can be problematic.
There are a few instances wherein you will need to re-partition:
1. As mentioned earlier, when you flash roms that use different pits, ie, 512 ->513 or 513 -> 512.
2. When you don't want to bother disabling lagfixes, you can do a re-partition to format everything. I've done this before and it's much faster than waiting for the robo-girl voice to finish her job.
Related
I'm trying to install the DocRambone series on my Samsung Galaxy S, but when I get to HOWTO#1 it says:
"2.Select the PDA/Modem/CSC/.PIT files in Odin. (.PIT and PDA are required. CSC and Modem are HIGHLY recommended. They may be necessary depending on the PDA! Try flashing all three BEFORE reporting bugs, if you only used one initially!)"
Now, the .PIT file I've already found(I chose the 512 since I understand that the 513 is for older versions and 803 is for Froyo). But I don't know where to find the other things, meaning PDA, CSC and Modem? Which ones should if pick(if there is more than one) and why?
If they are on my phone already, how do I mount them in Odin?
My firmware version is
PDA: I9000XWJM2
Phone: I9000XXJM1
CSC: I9000NEEJM1
Thanks alot
/JohnTheOne
Anyone who can help me?
Which Version Froyo? It sounds like you like to flash Froyo..
ok
You must make a Clean Stock Froyo Install.. I think u choose XXJPK take the files at the Tut..! ;D And then you can flash the "Custom Rom" via update.zip
Think thats it is what u mean..
I'm not flashing Froyo, I'm flashing for DocRomboe which is 2.1 (I think?) .. but like I said, the guide sais what I said above.. I need to find PDA, CSC and modem files, because (accordimg to the guide) Odin needs those files.. I'm following the big faq guide, so if anyone could tell me what to do, I'd appreciate it
Sent from my GT-I9000 using XDA App
So.. Who can help?
Sent from my GT-I9000 using XDA App
Oh come on, I really wanna do this soon !!
Read the Docrombone thread again and see what rom it is for. Its a mod. Now go find the rom it wants, something like say JM5 or JM8? do a search and you'll see people link it. Or goto http://www.samfirmware.com/ and make a account to view the firmwares there. I have no idea what rom that mod wants since you are the one wanting to install it
If you are looking for MODEM and CSC files specifically for 2.1, you can pull the ones from Richthofen's post here
-OR-
If you want to maintain your JM1 MODEM/CSC files, like the above poster suggested, visit Samfirmware
I upgraded to the latest version of froyo jpk without bavking up anything, is it possible for me to downgrade back to official 2.1? thanks in advance .
matlear said:
I upgraded to the latest version of froyo jpk without bavking up anything, is it possible for me to downgrade back to official 2.1? thanks in advance .
Click to expand...
Click to collapse
Yep. Just use Odin
Ok, i got the latest official firmware from samfirmware.com
Files include
512 pit file
CODE_I9000XWJM8.tar.md5
MODEM_I9000XXJM4.tar.md5
where should the red files be put in odin ?
The options i have are PDA PHONE and CSC ???
Do i need any other files ?
I dont wanna mess this up
does this look ok ?
matlear said:
Ok, i got the latest official firmware from samfirmware.com
Files include
512 pit file
CODE_I9000XWJM8.tar.md5
MODEM_I9000XXJM4.tar.md5
where should the red files be put in odin ?
The options i have are PDA PHONE and CSC ???
Do i need any other files ?
I dont wanna mess this up
Click to expand...
Click to collapse
If you absolutely positively have the right firmware - the CODE is the, um.... actusally I don't know... anyone else?
matlear said:
does this look ok ?
Click to expand...
Click to collapse
I know that's definitely wrong!
Phone = Modem - I know that!
And where's your PDA?
There's plenty of guides on this forum for flashing with Odin - just have a look in the main Dev threads - there's an Uber thread in there that explains literally everything...
alsheron said:
If you absolutely positively have the right firmware - the CODE is the, um.... actusally I don't know... anyone else?
Click to expand...
Click to collapse
LOL, dont wasnt any help
Hi,
the CODE file should be put to PDA,
MODEM is Phone, pit file is obvious..
Also you should flash a CSC File (which you put to CSC ) depending on your country or any Multi-CSC! Just use the search.
i downloaded I9000UGJH2 FROM
http://www.samfirmware.com/WEBPROTECT-i9000.htm
AND THEN ALSO
Galaxy S / .PIT File: DOWNLOAD. (512) FROM THE SAME SITE
LOADED Odin3 v1.3
CHECKED RE-PARTITION
MOUNTED BY PIT
s1_odin_20100512.pit
MOUNTED BY PDA
I9000UGJH2-PDA-Kernel-Bootloader-CL490514-Low.tar
CLICKED START AND IT DID EVERYTHING ELSE
now my phone is stock and works just like new
thanks guys, worked a treat
Hi, i flashed my phone with ODIN to I9000JPJG8 and it was just one PDA file. I think i ticked on re-partition and now when piece powers on it shows blue circle instead of my network logo. I then reflashed with partition unticked but now still same problem. Help!!
I found this site http://forum.xda-developers.com/showthread.php?t=780509
Should i try out the first option? It says this fix is for those who do not have (correct) .bak files in the /efs/ directory!
I think im coming from phone verison i9000XXJM1 and i know i have flashed many phones with this version and never had a problem.
Well just want to provide better information so i can get help:
Well before flashing my phone version was:
PDA: I9000 XWJM2
PHONE: I9000 XXJM1
CSC: I9000 OXXJM2
I then flashed it to I9000JPJG8. I9000JPJG8 was just a PDA file and i ticked re-partition. Now i see a blue circle. IMEI is fine and tried factory set but without success. I have flashed this verison before without ticking re-partition before and didnt have problems.
For repartitioning you would need a version with a pit file, otherwise the flash will fail, as in your case. You need to get a full package with pit file.
Sent from my GT-I9000 using Tapatalk
liraindon said:
For repartitioning you would need a version with a pit file, otherwise the flash will fail, as in your case. You need to get a full package with pit file.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Ok, thanks for at least helping this lost soul. Do you recommend any file for me?
Try finding your rom in general section. There is a sticky thread which contains links to all the roms and pit files.
Hope that helps.
Edit: The second post http://forum.xda-developers.com/showthread.php?t=723596 contains information on flashing with odin and the differnet pit files. It also links to the stock roms.
Normally clicking repartiton for a new Rom is not required, only if a rom changes the layout of the filesystems on the phone. The information about the new layout is contained in the pit file - you told odin to change the partitions, but did not supply the necessary information.
Good luck!
Sent from my GT-I9000 using Tapatalk
liraindon said:
Try finding your rom in general section. There is a sticky thread which contains links to all the roms and pit files.
Hope that helps.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Ok, thanks you dont realize how precious your help has been for a newbie like me.
Hello,
1) if I wanted to flash to JVO with Odin, is the setup in the attached pic correct (especially the files on PDA, PHONE, CSC and repartition ticked)?
2) Wasn't there a bootloader I needed to flash? I think I read somewhere the bootloader changed with GB.
Landorin said:
Hello,
1) if I wanted to flash to JVO with Odin, is the setup in the attached pic correct (especially the files on PDA, PHONE, CSC and repartition ticked)?
2) Wasn't there a bootloader I needed to flash? I think I read somewhere the bootloader changed with GB.
Click to expand...
Click to collapse
1)Yup
2)The bootloaders are included in the file you have ( See where it says sbl in the file name of the PDA )
Yeah saw that SBL and that made me suspicious whether that file really should go into the PDA slot and leave the bootloader slot blank.
Landorin said:
Yeah saw that SBL and that made me suspicious whether that file really should go into the PDA slot and leave the bootloader slot blank.
Click to expand...
Click to collapse
Nope leave it EXACTLY as you have it there mate and you are good to go.
and repartition has to be ticked as well, right?
Landorin said:
and repartition has to be ticked as well, right?
Click to expand...
Click to collapse
Yes.
You are using a pit file so you need repartition ticked.
Thanks a lot for the quick help!
Landorin said:
and repartition has to be ticked as well, right?
Click to expand...
Click to collapse
no don't repartition unless you want to in which case you need ONE EXTRA FILE: 512.pit!! You sound like a newbie so depending where you are coming from -stock firmware-wise, by all means repartition but you must obtain the 512.pit that you add to odin and flash with the rest of the rom. WARNING: this will wipe all your data and apps and repartition your phone including the sd card. make sure that you remove any external SD cards if you have one and the SIM card too...for peace of mind
UPDATE: oops! England has beaten Algeria...in cyberworldcup
I'd consider myself as noob, yep.
I thought I have to repartition when upgrading from JPY (2.2.1) to JVO? I don't know when this has to be done. Just saw the PIT file recommended for JVO on samfirmware and somehow assumed I have to repartition.
So what should I do, what's the difference if I do or not do it?
I backed up all data and wiped the phone before so there's not much on it right now (and no lagfix or so used, just stock rom with CF kernel).
Landorin said:
I'd consider myself as noob, yep.
I thought I have to repartition when upgrading from JPY (2.2.1) to JVO? I don't know when this has to be done. Just saw the PIT file recommended for JVO on samfirmware and somehow assumed I have to repartition.
So what should I do, what's the difference if I do or not do it?
I backed up all data and wiped the phone before so there's not much on it right now.
Click to expand...
Click to collapse
if you're sure that you used the same pit file as before i.e; 512.pit then you don't have to repartition at all.....if in doubt then repartition. BTW which pit file did you see on samfirmware.com? Should I assume that this is your first rom flashing from stock JPY? Also, make sure that you use the JVO rom that includes GB bootloaders.
Before? I never flashed a full ROM via Odin, only kernel (CF), thus I never re-partitioned myself.
Until now I used KIES always to flash ROMs.
If re-partitioning works like on a HDD I guess then this can be skipped unless something changed partition wise from Froyo to GB?
So do I need to re-partition at all?
Hey guys, gonna steal the end of this thread.
Currently I am on 2.2:
PDA: JPA / PHONE: JPP / CSC:JP7 (MET)
I want to use ODIN to upgrade to STOCK 2.2.1 and for it to change the CSC to XEU so that 2.3.3 (and future updates) will be done through kies automatically.
Can somebody confirm how I do this? Which file do i need to d/l - all three? And do I (and why) need to repartition?
Thanks in advance
Unregistered. said:
Hey guys, gonna steal the end of this thread.
Currently I am on 2.2:
PDA: JPA / PHONE: JPP / CSC:JP7 (MET)
I want to use ODIN to upgrade to STOCK 2.2.1 and for it to change the CSC to XEU so that 2.3.3 (and future updates) will be done through kies automatically.
Can somebody confirm how I do this? Which file do i need to d/l - all three? And do I (and why) need to repartition?
Thanks in advance
Click to expand...
Click to collapse
If you used Kies anyway, why not use it now to update to 2.2.1? Afaik you can change the CSC with market apps (think I read that somewhere but someone may want to confirm this). Anyways, you could just stick with your normal CSC as GB will be released to the rest of Europe anyway.
Currently, it's uncertain whether there will be more updates after GB afaik.
But yes, our question remains: do we have to re-partition at all if we only used Kies so far to update ROMs?
Landorin said:
If you used Kies anyway, why not use it now to update to 2.2.1? Afaik you can change the CSC with market apps (think I read that somewhere but someone may want to confirm this). Anyways, you could just stick with your normal CSC as GB will be released to the rest of Europe anyway.
Click to expand...
Click to collapse
Tried changing the CSC but it's didn't work. I'm with meteor and they are useless. So what i want is the stock 2.2.1 for UK and ireland as if it was d/l form kies and be on my way
Unregistered. said:
Hey guys, gonna steal the end of this thread.
Currently I am on 2.2:
PDA: JPA / PHONE: JPP / CSC:JP7 (MET)
I want to use ODIN to upgrade to STOCK 2.2.1 and for it to change the CSC to XEU so that 2.3.3 (and future updates) will be done through kies automatically.
Can somebody confirm how I do this? Which file do i need to d/l - all three? And do I (and why) need to repartition?
Thanks in advance
Click to expand...
Click to collapse
Official Samsung GB for UK has already rolled out, it's called XXJVO and believe me once you've done your first ODIN rom flashing you will never stop flashing other..(custom roms and kernels) if there're any geeky tendencies inside you and just waiting to be released... see this thread and all your fears will be assuaged!
http://forum.xda-developers.com/showthread.php?t=1011901
Widget21 said:
see this thread and all your fears will be assuaged!
http://forum.xda-developers.com/showthread.php?t=1011901
Click to expand...
Click to collapse
Thanks! There it says:
"Note: Re-partition is not a must, use it only if you need to change partition sizes on the device, but in most cases you will not need to repartition at all." question answered.
@Unregistered: you could use I9000XXJPY from samfirmware, JPY was the one that was offered to me by Kies back then (German unbranded SGS). But someone may want to confirm this to you first, as I see lots of others 2.2.1 ROMs there and not sure what the difference is. Samfirmware offers a single file and once extracted you should have 3 files.
I just wonder why the 2.2.1 ROM files do not show on that website which CSC is used, maybe it's universal or something?
Well, I guess Widget21 has a point here. If you are willing to flash now with Odin, you might be willing to do it with GB too, then the CSC won't matter (it doesn't matter much anyway as I learned).
Just be sure your 3 button combo is working and that you connect with direct USB.
Landorin said:
Thanks! There it says:
"Note: Re-partition is not a must, use it only if you need to change partition sizes on the device, but in most cases you will not need to repartition at all." question answered.
@Unregistered: you could use I9000XXJPY from samfirmware, JPY was the one that was offered to me by Kies back then (German unbranded SGS). But someone may want to confirm this to you first, as I see lots of others 2.2.1 ROMs there and not sure what the difference is. Samfirmware offers a single file and once extracted you should have 3 files.
I just wonder why the 2.2.1 ROM files do not show on that website which CSC is used, maybe it's universal or something?
Well, I guess Widget21 has a point here. If you are willing to flash now with Odin, you might be willing to do it with GB too, then the CSC won't matter (it doesn't matter much anyway as I learned).
Just be sure your 3 button combo is working and that you connect with direct USB.
Click to expand...
Click to collapse
Is it JPY or JPX for UK (XEU)?
I dont want to flash gingerbread. Not yet anyway.
Landorin said:
Thanks! There it says:
"Note: Re-partition is not a must, use it only if you need to change partition sizes on the device, but in most cases you will not need to repartition at all." question answered.
@Unregistered: you could use I9000XXJPY from samfirmware, JPY was the one that was offered to me by Kies back then (German unbranded SGS). But someone may want to confirm this to you first, as I see lots of others 2.2.1 ROMs there and not sure what the difference is. Samfirmware offers a single file and once extracted you should have 3 files.
I just wonder why the 2.2.1 ROM files do not show on that website which CSC is used, maybe it's universal or something?
Well, I guess Widget21 has a point here. If you are willing to flash now with Odin, you might be willing to do it with GB too, then the CSC won't matter (it doesn't matter much anyway as I learned).
Just be sure your 3 button combo is working and that you connect with direct USB.
Click to expand...
Click to collapse
JVO has multiCSC and UK's xeu is included in it so no need to worry about changing CSCs...remember the 'Thanks' button is there for a reason
@Unregistered: yeah, sorry, that's what I meant. If you wanna flash GB in the future you might want to do it with Odin and then the CSC shouldn't matter anymore.
For some reason, I'm unable to find out the CSC on the file and it's not listed. The JPY I downloaded from samfirmware recently has DBT as CSC (Germany). If you download the JPX file and extract it the CSC file might tell which region it is (as in my case).
@Widget21: I used my thanks feature up for today (5 max). I'll try tomorrow again.
I just downloaded this:
http://hotfile.com/dl/100618077/49a97b4/I9000XXJPY.rar.html
JPY_JPY_JPY.tar. I thought i was getting the three files. Where do i go from here
Samsung released a 16GB variant of the SM-N9005 in Hong Kong. This device comes with a slightly different PIT than the 'international' version of the phone.
I am attaching the PIT files of both.
Many people have soft bricked their phones while tinkering with the 16GB version. And then, people who updated to the KitKat bootloader have no option but to use a custom ROM because an official ROM using that bootloader and the 16GB pit is not out yet.
When trying to flash official 'international' ROMs on the 16GB device, it gives a 'invalid ext4 image' error.
Through some trial and error, I have made this out to be due to the fact that the 16GB pit file has a different size defined for the 'system' partition.
I have been trying to make a PIT file that will account for the 16GB size of the N9005 and will let people flash 'international' ROMs to their devices and have spent many hours on this project of mine.
And well, for the life of me, I cannot figure out how to make the required PIT.
The differences between the 16GB pit and the 32GB pit are in 3 partitions- System, Cache, SGPT.
Also attaching a PIT file that I made but I didn't want to give it out to the community because I wasn't confident about it and didn't wanna risk being the reason for bricking people's phones.
In this PIT, I have changed the system and the cache partition sizes to match the 32GB pit, but the SGPT partition is untouched because it confuses me.
PIT files can be opened, viewed and edited by the software PIT Magic by lyriquidperfection.
I am asking for advice/help, if anybody has any to offer.
Also, I have read the guidelines about these forums and the strict warning. I hope that this is classified as development. If not, I apologize and would request a mod to move this thread to the appropriate forum.
FeralFire said:
Samsung released a 16GB variant of the SM-N9005 in Hong Kong. This device comes with a slightly different PIT than the 'international' version of the phone.
I am attaching the PIT files of both.
Many people have soft bricked their phones while tinkering with the 16GB version. And then, people who updated to the KitKat bootloader have no option but to use a custom ROM because an official ROM using that bootloader and the 16GB pit is not out yet.
When trying to flash official 'international' ROMs on the 16GB device, it gives a 'invalid ext4 image' error.
Through some trial and error, I have made this out to be due to the fact that the 16GB pit file has a different size defined for the 'system' partition.
I have been trying to make a PIT file that will account for the 16GB size of the N9005 and will let people flash 'international' ROMs to their devices and have spent many hours on this project of mine.
And well, for the life of me, I cannot figure out how to make the required PIT.
The differences between the 16GB pit and the 32GB pit are in 3 partitions- System, Cache, SGPT.
Also attaching a PIT file that I made but I didn't want to give it out to the community because I wasn't confident about it and didn't wanna risk being the reason for bricking people's phones.
In this PIT, I have changed the system and the cache partition sizes to match the 32GB pit, but the SGPT partition is untouched because it confuses me.
PIT files can be opened, viewed and edited by the software PIT Magic by lyriquidperfection.
I am asking for advice/help, if anybody has any to offer.
Also, I have read the guidelines about these forums and the strict warning. I hope that this is classified as development. If not, I apologize and would request a mod to move this thread to the appropriate forum.
Click to expand...
Click to collapse
hi
i am a hk guy and luckly i did not buy the note3. but i wonder why the hk pit is different from european's, since i have no problem in using european roms at all. i have not read the pit files yet but i suggest you to repack the images from european roms and see if it work. if it fails, extract the images and tar them and untar the tar files in your phone, which should not be bound by the pit, if any
good luck
ykkfive said:
hi
i am a hk guy and luckly i did not buy the note3. but i wonder why the hk pit is different from european's, since i have no problem in using european roms at all. i have not read the pit files yet but i suggest you to repack the images from european roms and see if it work. if it fails, extract the images and tar them and untar the tar files in your phone, which should not be bound by the pit, if any
good luck
Click to expand...
Click to collapse
I know for a fact that repackaged ROMs don't work.
Can you explain the other idea? I didn't really understand it.
What do you mean by 'untar files in the phone'?
Also, anybody with a 16GB phone brave enough to test things?
FeralFire said:
I know for a fact that repackaged ROMs don't work.
Can you explain the other idea? I didn't really understand it.
What do you mean by 'untar files in the phone'?
Also, anybody with a 16GB phone brave enough to test things?
Click to expand...
Click to collapse
i mean, extracting the system.img, for instance, on a linux. then u can use tar command to create a tar file containing the whole system dir, just like a zip but without compression. finally push the tar file to your phone and then untar it to the /system in recovery. thats it
you don need to worry if u do it correctly, since i always use tar to upgrade my phone
ykkfive said:
i mean, extracting the system.img, for instance, on a linux. then u can use tar command to create a tar file containing the whole system dir, just like a zip but without compression. finally push the tar file to your phone and then untar it to the /system in recovery. thats it
you don need to worry if u do it correctly, since i always use tar to upgrade my phone
Click to expand...
Click to collapse
Yeah. That would work, but I want to solve this thing without using recovery. So that people can flash without tripping knox.
If people are unopposed to tripping knox, they can flash custom ROMs anyway.
I did build a tar file with heimdal using kitkat system and 16GB pit. Will upload it tomorrow in university. My net here sucks.
I built a tar file using Heimdall.
This was made using the 16GB pit but the files from the leaked Kitkat ROM.
It does not include the bootloader, so it shouldn't be harmful. Still, flash at your own risk.
Need a tester with a 16GB device. Preferably running Kitkat with the new bootloader.
But even without, we just need to see if this flashes successfully.
Try flashing it through odin. Repartition ought not to be ticked, but if it doesn't work without, try with it ticked as well.
If neither work, try it with heimdall.
https://mega.co.nz/#!xgZHRSqC!FGevxC9hims_UBt5xXPfWuII6KnFkw9drBRuywXtfFM
So, that didn't work.
Any other ideas?
I am all out.
Starting from SGS4, PITs are signed and cannot be flashed if modified.
So, you can only flash official PIT signed by Samsung.
If signature of HK version is compatible with International version then you can flash any of them.
sorg said:
Starting from SGS4, PITs are signed and cannot be flashed if modified.
So, you can only flash official PIT signed by Samsung.
If signature of HK version is compatible with International version then you can flash any of them.
Click to expand...
Click to collapse
The problem with the HK pit is the different size alloted to the system partition.
Does the signing issue extend to Heimdall as well?
I don't suggest to use any flasher except Odin. I never used Heimdall. Actually, it's possible to flash partitions to any place regardless PIT, but it may lead to different kinds of problems.
Long time ago, i've experimented with PIT on i9500. I've flashed PIT through dd (so, i've skipped signature check) and result was cycling reboot. Initial samsung static logo appear, shortly flash and then appear again. Thus, phone didn't even start to boot kernel. Luckily, Exynos has simple bootloader and work independently from PIT and other partitions. I've booted into download mode and flashed original PIT.
There is PIT signature check not only while flashing, but also while booting. You can flash modified PIT file through 3rd party flasher, but phone won't boot.
I doubt Note 3 has different behavior than SGS4. Especially, with much more complicated booting process on Snapdragon (unlike simple Exynos booting process) you are risking to get hard-brick.
latest lollipop
Any ideas that the hk version 16gb note 3 able to flash the poland lollipop firmware? I really get confuse coz same version n9005 but both cant share same firmware and ao complicated.
I've got the same question as elvin92,
is it possible to install Polish (XEO) Lollipop ROM on 16GB Note 3 with loaded N9005ZHUENJ1 (TGY) on board?
when trying to install via Odin I get:
...
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so it's Pit fault ? wrong sizes ?
Want to update to lollipop..
I have note 3 lte sm n9005 16 gb with TGY frimware and want to update to lollipop XEO... plz help? provide pit file...