Related
Does anyone have a solution for phantom taps on your NC?
I'm on my 3rd Nook Color when I pick up the replacement unit this afternoon.
My general issues are phantom taps - or the NC doing things I don't want it to. So far a very poor experience when typing, turning a page in a book, or even just navigating the ui. The whole issue may be me, it happens regardless if I am plugged in or not. I keep a very clean screen so there is very to little gunk.
I do have sweaty palms on occasion but not out of the ordinary. I have other touch devices that have never given me this issue. If anything I think the screen is overly sensitive - hardware or software issue?
Nope it's not just you. Mine has a multitude of issues with the touchscreen...
Essentially I cannot use the touchscreen when the device is plugged into stock charger/cable as wherever I put my finger, a random touch appears somewhere on the x-axis near my finger.
It seems that the device does not like changes in temperature or humidity either when it is unplugged. Using my tablet while cold was impossible, and likewise while it had been warm.
I'm on my second tablet from Best Buy-- the first one had dead pixels galore (enough to make the best buy rep say "dang!"), and now this one has a bad touchscreen and hard to press power button.
However: I purchased one of these for my mother a few days before mine at Barnes and Noble, and it has no issues whatsoever... at least not yet.
I've come to the conclusion that this hardware is quite beta, but I'm willing to give them a chance since it is the best bang for the buck, even if I have to go through a couple of returns... it's honestly almost worth the time for me since a tablet is so valuable for schoolwork.
Fortunately mine does not do this. I think maybe for those that are having this issue it may be able to be fixed in a firmware update.
My EVO had extremely similar problems when it first came out with the touchscreen and not being able to use the dropdown menu while the device wasn't grounded. After a firmware update the phone was great with touch sensitivity.
my first one did this also. so far the second is doing fine, but the first didn't have any problems till the 13th day of owning it.
i'm hoping it's just an issue that can be fixed via software - maybe someone put an incorrect voltage input somewhere.
I was having the same issues. I bought a screen protector and that seemed to solve it. So far, it's been working fine.
I noticed the screen protector stabilized the touchscreen a lot. Before I seem to have a problem finding the sweet spot for a touch. Now it seems better.
However, my phantom pinky is always touching something while I am trying to navigate. As long I only get one finger near the screen, it's fine.
Mine came from B&N.
The only other issue I have is the magnetic clasp in the cover seems to throw the internal compass/magnetometer off a lot.
Awats said:
The only other issue I have is the magnetic clasp in the cover seems to throw the internal compass/magnetometer off a lot.
Click to expand...
Click to collapse
Considering the Nook has neither I think you are okay.
khaytsus said:
Considering the Nook has neither I think you are okay.
Click to expand...
Click to collapse
Then how is it managing to correctly position the screen with Google Sky? Is it just spooky smart?
Mine only has problem when screen gets dirty. Try a screen protector or use gloves.
is there really a compass in this thing? I just assumed there wasn't. if there is I'm buying another tomorrow!
Screen protector helps to solve my problem.
Are you seeing more issues right after cleaning the screen? I see issues then and I think it is because I an using some moisture on the cloth. If I just dust it lightly with a dry cloth and live with a few finger prints there seem to be less of an issue.
Awats said:
Then how is it managing to correctly position the screen with Google Sky? Is it just spooky smart?
Click to expand...
Click to collapse
Wifi location services provided by Google from data collection by Street Cars or by Location Services on Android phones.
iolinux333 said:
is there really a compass in this thing? I just assumed there wasn't. if there is I'm buying another tomorrow!
Click to expand...
Click to collapse
....no
khaytsus said:
Wifi location services provided by Google from data collection by Street Cars or by Location Services on Android phones.
....no
Click to expand...
Click to collapse
Oh well, it could be worse although I don't see how Google data can tell which direction I am facing.
Thanks dad!
Awats said:
Oh well, it could be worse although I don't see how Google data can tell which direction I am facing.
Thanks dad!
Click to expand...
Click to collapse
Nor can your Nook Colour.. Using something like TetherGPS would have some heading information, but the NC itself without help would not.
It might show 0, dunno there. Maps for me just shows a dot, if yours is showing different, that'd be... interesting.
For S&G I tried "Compass", it of course FC's immediately like almost all apps that try to use the GPS. Enabled TetherGPS (with no server, just the client) and it ran, but of course no data, no heading, etc.
Is this occuring when the nook is plugged in? sometimes the charger can cause phatom touches with the touchscreen. Cleaning the screen and being on a stable ROM usually gets rid of that problem.
If only I weren't so stupid ...
khaytsus said:
Nor can your Nook Colour.. Using something like TetherGPS would have some heading information, but the NC itself without help would not.
It might show 0, dunno there. Maps for me just shows a dot, if yours is showing different, that'd be... interesting.
For S&G I tried "Compass", it of course FC's immediately like almost all apps that try to use the GPS. Enabled TetherGPS (with no server, just the client) and it ran, but of course no data, no heading, etc.
Click to expand...
Click to collapse
LOL! Ok, I sat down with it and played for a bit. It appears some tilt sensor is handling the up and down tilt. If you raise the screen over your head, it shows those stars and if you tilt it down, I see what is below the horizon. That is pretty consistent. But it's also "simulating" a compass inadvertently.
By that I mean that if I happen to turn it on facing north, it appears to track as you turn in a circle but it's really just me tilting it and it's rotating he view. If you do it enough it has no clue the direction it's facing.
I'm just glad I figured this out before I got lost in the Amazon.
Just got mine plugged it in and unplugged and within stew minutes phantom touches couldn't even reboot it im on cyanogen mod 7
Sent from my SCH-I500 using XDA Premium App
Nook Screen Recalibrate
You guys can try my app from the market
assid2 said:
You guys can try my app from the market
Click to expand...
Click to collapse
Wow, it seems to have improved the accuracy! I need to play with it more to be sure.
I know that this has been a fairly common complaint about the Nexus One but i'm wondering, roughly what percentage of people actually have this issue? To clarify, i mean the problem whereby touching the screen in one place is actually registering elsewhere on the screen.
I've had this problem since buying my n1 and having to constantly turn the screen off and back on again was driving me nuts. Finally i sent the unit back to Vodafone for repair and they in turn sent it to HTC to be fixed. So yesterday i got it back with an enclosed statement along the lines of "we have fixed your fault etc..".
Three minutes into using the damn thing and the fault crops up again. So much for that! To be fair to Vodafone they are sending out a replacement unit now but of course i'm concerned that even that will have the same issue.
What are the odds?
Here is the same.
To developers: the fact that resetting the screen fix the problem makes me to ask if there isn't a way to make the screen re-calibrate itself every X seconds/minutes, without shut off and on the screen every time. Seems to be until now the only solution to this extremely annoying issue.
It really is a bizarre one. I've seen people discussing whether it's a hardware or software issue but nobody seems to have a definitive answer. If it were a hardware problem, surely it would be constant/permanent? If it's a software issue i would have thought that somebody would have bug-fixed it by now? Especially as it seems so prevailant.
I'm stumped!
Other than this one problem though i am completely in love with this phone. The device itself feels solid, durable and pleasant to use. Android is improving all the time and it always impresses when you demonstrate to the un-initiated what the device is capable of. So close to perfect...but not quite!
EDIT... This from the wiki.. "- Q5: Sometimes my screen registers touches in incorrect places, and I need to turn the phone off and on to make it work correctly again
A: This is a hardware problem, nothing can be done about it. Nexus One's digitizer sucks.
Ho-Hum.
I have experienced this problem on android 2.1 ever since upgrading 2.2/2.2.1, I haven't had the problem. I'm very happy with my screen
Sent from my Nexus One using XDA App
msavic6 said:
I have experienced this problem on android 2.1 ever since upgrading 2.2/2.2.1, I haven't had the problem. I'm very happy with my screen
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
That suggests a software problem although i have had it on 2.1, 2.2 and now 2.2.1. I would say that it has happened to me within three minutes of using the phone, 50% of the time within that three minute window. In other words it's cropped up in half the texts/emails i have sent where i have had to do the screen off/on thing to complete the message.
Very annoying.
It has to do mostly with the way people hold their phones, the possibility of registering false touches - including, for example, touching the screen with fingers that aren't completely dry. Some have the issue more than others.
HW issues still can have SW workarounds sometimes. I'm not sure if it's the case. HW and SW need to be analyzed to find one, if exists.
There is no "calibrating" capacitive touchscreen. Resetting its controller might have effects like missing touches and other random screen misbehavior (for example - if the controller is tracking fingers, resetting it would cause it to lose the tracking).
Since getting my phone back from 'repair' the issue is less frequent, suggesting that it's not a usage problem as i'm obviously still using the phone in the same manner as before. Instead it seems that various devices suffer from the problem in varying degrees.
I suppose if i knew what they had actually done to the phone while it was being tended to it might help us discover why the frequency of the problem has been reduced. I know that the digitizer wasn't replaced as the phone came back with the same screen protector on it as it had when i sent it off. That being said, they obviously did something. I just don't know what!
Most probably replaced the phone's MB.
Try upgrading to the latest radio - the issue will probably not be 100% solved, but now I only get it maybe once a month or so...
I may tell them not to bother sending out a replacement. It's happening far less often since it was returned and (going by the poll results), there's a good chance that the replacement could actually be worse than this one is now.
Perhaps the 2.3 update will jar something loose.
ATTENTION PLEASE!!
after flashing miui latest ROM i've never had touchscreen issues anymore in over 20 hours of hard usage (also with the phone in charge!!).
I don't believe is a coincidence, developers please ask miui developers if they have integrated a code to fix this issues.
Thanks!
Sent from my Nexus One using XDA App
pyngwie said:
ATTENTION PLEASE!!
after flashing miui latest ROM i've never had touchscreen issues anymore in over 20 hours of hard usage (also with the phone in charge!!).
I don't believe is a coincidence, developers please ask miui developers if they have integrated a code to fix this issues.
Thanks!
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
could you please download Multitouch Visible Test
http://www.appbrain.com/app/multitouch-visible-test/com.batterypoweredgames.mtvistest
and report back?
xyellx said:
could you please download Multitouch Visible Test
http://www.appbrain.com/app/multitouch-visible-test/com.batterypoweredgames.mtvistest
and report back?
Click to expand...
Click to collapse
I have already restored cyano 6.1.1.
However, about "multitouch issues" I mean inaccuracy, the fact that the touch is recognised in another point of the screen (particularly when you press the bottom part of the panel). I didn't verified the axes-inversion issue, but I'm almost sure that it persists.
The "touch inaccuracy" is nothing else than the usual axis-swapping thing. When accidental dual touches (palm/holding fingers/water/etc) happen, the digitizer goes nuts.
Jack_R1 said:
The "touch inaccuracy" is nothing else than the usual axis-swapping thing. When accidental dual touches (palm/holding fingers/water/etc) happen, the digitizer goes nuts.
Click to expand...
Click to collapse
I don't think so....I pay attentions when the screen goes crazy. I'm absolutely sure that (in charge for example) my touch is ONE.
The only times I was able to trigger the "screen nuts" effect, were when I was typing 2-fingered, and fast - making it register dual touches. Moreover, sometimes a single touch with a single finger is reported as series of touches. Once it happens, it stays until screen off.
Jack_R1 said:
Moreover, sometimes a single touch with a single finger is reported as series of touches. Once it happens, it stays until screen off.
Click to expand...
Click to collapse
I mean this....since I moved to MIUI this is not happened anymore.
Since I uninstalled Htcime the inaccuracy issues seem less so far! Almost only with the phone under charge ...much much better than before! Dunno why....
Sent from my Nexus One using XDA App
It seems that corner touch screen sensitivity issues are prevalent among all nook color users. What I'm wondering is, does nookie Froyo have this issue as well?
Yes, or at least for me.
No difference on nookie froyo for me either. I'm pretty sure its a hardware defect and not a software one.
I'm on a rooted stock, but my edge sensitivity issues went away when I loaded one of the overclock kernels. I don't know how the two could be linked, but it is the only explanation I have for the difference. I'm not sure if that's been explored on Nookie, but I thought I would share since that would point to a software issue rather than hardware.
isolated_epidemic said:
I'm pretty sure its a hardware defect and not a software one.
Click to expand...
Click to collapse
That I'm not so sure of. Using "Touch Test" I see all touches, but they seem to get shifted slightly when I press near the edges. Maybe this could get solved in the driver (maybe with some help of calibration tool). I hope to have time to play with this sometime soon.
isolated_epidemic said:
No difference on nookie froyo for me either. I'm pretty sure its a hardware defect and not a software one.
Click to expand...
Click to collapse
How can you be so sure?
If i use google market, sometimes the search button is hard to press,
but using appbrain market it works 100% of the time without problems.
No its not H/W I think, run some tests and corners work fine.
Its certainly something else, I also have better response after loading OC.
I've seen the same thing (I would bet every nook owner has.) The Market Search especially takes *%)(!%&! forever to get to work for me.
I've seen the same behaviour as well, some apps the corners take 18,013,108 tries to get to work, other apps I'm all "Whoa, first try and it worked?!".
I put the 950 OC on my autonoot but then I started playing with Froyo on a C10 SD card (very quick) so I don't know if the OC's actually helped with the corners or not. And of course this is the one day I leave it at home since I got it.
Ultimoose said:
I've seen the same thing (I would bet every nook owner has.) The Market Search especially takes *%)(!%&! forever to get to work for me.
Click to expand...
Click to collapse
Use Menu>Search instead of trying to touch the top magnifying glass.
Happens to me with Froyo. I seriously doubt its hardware related. Seemed to work fine on the stock B&N.
It is common for digitizers to be less accurate along the edges but the Nook Color seems worse than normal. I've noticed the problem regardless of kernel or rom used.
I'm pretty sure it has something to do with the LCD Density. All buttons/elements are a lot easier to press when I switched to 240-250. It does look ugly though, it'd be a lot prettier when we get a custom rom running.
Sigvard is right. Fixed for me by chaging my LCD Density. I set it to 200, which is a little too large for me, so I may lower it. But since doing that I have had no problems at all.
Guide here: http://forum.xda-developers.com/showthread.php?t=889951&highlight=LCD+Density
Ha! I have the exact problem even with stock rom. I though it was the problem of the particular corner of the unit I got! It is much easier to press the button in landscape view.
I dont believe its the screen. Download AppBrain and tap the search button. it works 100% of the time
It is the screen. Use a drawing program and notice how it is easy to draw a straight line in the middle and not as easy on the sides and corners. Note, you need to drag your finger slowly or else you will see more interpolation.
Raising the LCD density just hides the problem by making the hit zone bigger. Fortunately, I can live with the it.
Device: Nook Color rooted to 1.1
I had my Nook Color in the car today (40 degrees or so), pulled it out to show her what it looked like rooted. While standing in the driveway showing her different things, I found the touch screen was overly sensitive. As I was scrolling through different things (the app list, twitter, facebook), the slightest touch would select/open an item. It normally doesn't do this. It was incredibly frustrating and almost unusable. I pulled it out later and it seems to be behaving like it normally does.
Does temperature affect the NC screen? Where they any touch screen changes in 1.1? Is there a setting to calibrate the touch screen? I can't seem to find one. Any other suggestions?
I tried doing a search on the forum, but the search crashed.
Thanks.
horsemom said:
Is there a setting to calibrate the touch screen? I can't seem to find one.
Click to expand...
Click to collapse
I was wondering this myself. My input doesn't seem to register as I get towards the edge of the screen.
tactfulcactus said:
I was wondering this myself. My input doesn't seem to register as I get towards the edge of the screen.
Click to expand...
Click to collapse
I don't know if it's placebo or not, but I feel like this app improved my screen response.
http://forum.xda-developers.com/showthread.php?t=934500
As for the other question, I would expect the screen to be less responsive in cold weather, but I don't have anything to base that on.
Guessing what you experienced was due to condensation on the screen. Doesn't take much and can be 'invisible' to you but the screen is sensitive to 'stuff' on the screen and will become overly sensitive if there is anything on it, like moisture, skin oils, etc .. a screen protector may help but unless it continues that is probably the cause.
tactfulcactus said:
I was wondering this myself. My input doesn't seem to register as I get towards the edge of the screen.
Click to expand...
Click to collapse
What you experience is probably temperature related, but another thing to try is to increase the LCD screen density to around 190, 200, or a little more. For me, I get improved sensitivity, especially near the corners.
My daughter accidentally got a little water on the screen and it was a little erratic. I put it in a ziplock with a handful of rice for about 6 hours and it was like new.
I have owned 3 nook colors, the first one I owned freaked out when I used a damp cloth to wipe the screen. It exhibited some strange behavior and emitted some loud static from the speaker. It would not power down or anything... finally it just went back to normal, so I took it back to B&N and then went and bought one at walmart. I took it back because I thought I wanted the Viewsonic G Tablet. But after trying it I finally bought a Nook Color at Best Buy, bought a screen protector too so that I don't have a repeat of my first NC. The screens on these things are, I believe, rather sensitive and the cold or the moisture may have played a part in your unit's behavior.
migrax
tactfulcactus said:
I was wondering this myself. My input doesn't seem to register as I get towards the edge of the screen.
Click to expand...
Click to collapse
Same here. My screen also seems very inaccurate.
Have you found a fix?
Sent from a NookColor using the xda app
I'd be interested in a solution for this as well, since the edges of my NC screen seems to be a lot less sensitive. For instance, when the Market is launched, it takes 4-5 tries to hit the search button at the right top corner (I know that I can hit menu and select search from there, but I am trying to illustrate my point).
tenderidol said:
I'd be interested in a solution for this as well, since the edges of my NC screen seems to be a lot less sensitive. For instance, when the Market is launched, it takes 4-5 tries to hit the search button at the right top corner (I know that I can hit menu and select search from there, but I am trying to illustrate my point).
Click to expand...
Click to collapse
this modified kernel solves that
http://forum.xda-developers.com/showthread.php?t=925451
and you'll also get a speedier nook
It's funny, actually... The cold makes your skin less detectable because of vasoconstriction in your fingers as a physiological response to the cold temperature, but a hint of moisture by means of condensation has the opposite effect.
For me, condensation is rarely a problem, but the decreased capillary blood flow effect is quite noticeable.
Sent from my Nexus S using XDA Premium App
One thing that's been mentioned before (and the B&N salesman told me while buying a screenprotector) is that if the screen has a lot of fingerprints, it'll make the nook act weird.
Try wiping the screen of fingerprints.
don_ernesto said:
this modified kernel solves that
http://forum.xda-developers.com/showthread.php?t=925451
and you'll also get a speedier nook
Click to expand...
Click to collapse
Thanks for the reply. Is it safe to assume that the screen sensitivity would not be an issue in Honeycomb since it is designed for tablets? If so, I may just wait for the final release of HC before fiddling with different kernels,etc. Thanks!
tenderidol said:
Is it safe to assume that the screen sensitivity would not be an issue in Honeycomb since it is designed for tablets? If so, I may just wait for the final release of HC before fiddling with different kernels,etc. Thanks!
Click to expand...
Click to collapse
final realease of HC? no one knows if we will ever have one...... anyhow, it seems to be a fix at kernel level (had to be fixed in eclair, froyo and HC), and it fact, it was discovered by deeper (the guy who ported our HC version)
my suggestion? go for it now. the sensitivity problem is way too bothersome, and it is very easy to apply
don_ernesto said:
final realease of HC? no one knows if we will ever have one...... anyhow, it seems to be a fix at kernel level (had to be fixed in eclair, froyo and HC), and it fact, it was discovered by deeper (the guy who ported our HC version)
my suggestion? go for it now. the sensitivity problem is way too bothersome, and it is very easy to apply
Click to expand...
Click to collapse
Thanks again for the reply.
Yes, I'd love to take care of it ASAP, since I'm sick of trying to hit a small button on the screen and going somewhere else instead.
My NC was rooted with B&N 1.1 + Autonooter 3.0. Will I still be able to "apply" the changes that you mentioned on top of that or do I have to start from scratch?
Thanks!
tenderidol said:
My NC was rooted with B&N 1.1 + Autonooter 3.0. Will I still be able to "apply" the changes that you mentioned on top of that or do I have to start from scratch?
Thanks!
Click to expand...
Click to collapse
go ahead! you won't loose any app or any data (not even your progress in Angry Birds)
Of course, before applying this changes i always make a backup. good to have a way back in case something goes wrong
Good test tool
I ran GoJimi's tool, and since then my screen has been flipping out. Typing anything is a good test...I enter one key like "z", and get 2 - "zm". Utterly maddening.
A good tool to see what's going on is "Mutitouch Test" from JerryW in the market.
When I press with one finger, I see a "phantom" 2nd point jumping around. Very quick way to see 1) how good tracking is and 2) if there's any random inintended multitouch action happening.
Does anyone have issues with the touchscreen skipping every once in a while? Occasionally, there is an area on the lower half of the screen that seems to be insensitive, but if you start touching around it, it goes back to normal.
I've discussed this with some fellow Z1 owners and it appears to be a relatively common issue. There is some discussion that it may be due to overheating or a software issue.
Anyone else have this problem?
Had this once while my device overheated hard(~47-48°).
Not sure if I have to be concerned about that, because otherwise it works fine.
koopa101 said:
Does anyone have issues with the touchscreen skipping every once in a while? Occasionally, there is an area on the lower half of the screen that seems to be insensitive, but if you start touching around it, it goes back to normal.
I've discussed this with some fellow Z1 owners and it appears to be a relatively common issue. There is some discussion that it may be due to overheating or a software issue.
Anyone else have this problem?
Click to expand...
Click to collapse
Same here
Sent from my C6903 using XDA Premium 4 mobile app
At first I thought it was an issue with crappy screen protectors. The Z1 already has a anti-crack film on the screen so I thought that adding a poorly made screen protector would create too much distance from my touch to the sensor. However, I've tried replacing the screen protector and also asked other people with varying brands of screen protectors and it seems that the issue still persists.
The issue seems to occur most often on the password screen for me (which is particularly annoying).
I've had it too, lower half of screen does not register slides on login screen for a brief moment.. No overheat!
Sent from my C6903 using Tapatalk
No overheat here 2 but with the same issue.
Also the last days i think that all the screen sometimes is more insensitive than usual.I have to touch 2-3 times to do what i want.
I think that is a hardware issue.
Have it sometimes as well sadly! Can't figure out when exactly it's happening though..
I find it very annoying when I'm scrolling and at the bottom part of the screen, the scrolling becomes a click, which brings me to a place I did not intend to go to. Hope it's software, but can't imagine that.
Happens to me as well, regardless of device temperature. Based on the seemingly random nature of the issue, it should be a simple fix via software update. A similar bug persisted on the 2013 Nexus 7 devices when you laid them flat on a surface.
koopa101 said:
Does anyone have issues with the touchscreen skipping every once in a while? Occasionally, there is an area on the lower half of the screen that seems to be insensitive, but if you start touching around it, it goes back to normal.
I've discussed this with some fellow Z1 owners and it appears to be a relatively common issue. There is some discussion that it may be due to overheating or a software issue.
Anyone else have this problem?
Click to expand...
Click to collapse
Same problem here!!!
I think is a hardware issue. When you touch the alu frame the phone works fine. If the phone is on the table or in a cover the issue are immediately there.
Sorry for my bad english. Hope you understand
I noticed some small things and thought it was me but I guess this makes sense.
Could be worse, my previous Note 3 had multitouch issues and had problems register several fingers :silly:
Considering how common the issue appears to be, I find it hard to believe that this is a hardware issue.
I also don't believe it's related to overheating since it seems to happen even when I haven't used the phone at all for a long time.
It feels like a software issue to me since the issue sends to go away if you touch another section of your screen
koopa101 said:
Considering how common the issue appears to be, I find it hard to believe that this is a hardware issue.
I also don't believe it's related to overheating since it seems to happen even when I haven't used the phone at all for a long time.
It feels like a software issue to me since the issue sends to go away if you touch another section of your screen
Click to expand...
Click to collapse
When you touch the alu frame the issue is not there. Only when you use phone without touching the frame.
Must be some kind of hardware issue...
Sent from my iPad using Tapatalk HD
I am having the exact same issue. The weird thing is, is that it doesn't always fail to register my finger. I've gone a few days without it, then suddenly it's back again. Also in the Xperia Diagnostics app I could then see the phone failing to register a proper line, then 20 seconds later it's gone. Weird thing indeed.
Sent from my C6903 using XDA Premium 4 mobile app
nonamedk said:
When you touch the alu frame the issue is not there. Only when you use phone without touching the frame.
Must be some kind of hardware issue...
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
Is this the case? I don't think I've ever used my phone without touching the frame somehow.
koopa101 said:
Does anyone have issues with the touchscreen skipping every once in a while? Occasionally, there is an area on the lower half of the screen that seems to be insensitive, but if you start touching around it, it goes back to normal.
I've discussed this with some fellow Z1 owners and it appears to be a relatively common issue. There is some discussion that it may be due to overheating or a software issue.
Anyone else have this problem?
Click to expand...
Click to collapse
Yes, I have it as well.. First of all though, to reply to a lot of people on this thread, it happens regardless of "flat surface, touching the frame, overheating", or anything else. It seems to be completely random with me. Sometimes everything is perfect, then it goes nuts for no apparent reason whatsoever. I'm almost sure it's a software issue, and hope sony will address this issue soon!
it also happens sometimes to me.
the only thing that helps is to touch the ground of the ac power socket. it seems like the screen needs much more potential difference between the pointer and the screen itself and after a while of using it the pointer (you and your fingers) are more loaded.
thats my theory to it.
Jimmyness said:
Yes, I have it as well.. First of all though, to reply to a lot of people on this thread, it happens regardless of "flat surface, touching the frame, overheating", or anything else. It seems to be completely random with me. Sometimes everything is perfect, then it goes nuts for no apparent reason whatsoever. I'm almost sure it's a software issue, and hope sony will address this issue soon!
Click to expand...
Click to collapse
Unfortunately, unlike the rooting camera bug, it doesn't sound like Sony has even acknowledge it at all.
Exactly this.
http://www.youtube.com/watch?v=h0sqwwUoEPc
I often have to attempt inputting my password multiple times before I can finally get it right. I have since switched to PIN unlock. Really wish there was some sort of response from Sony.
I'd you're using pie then stop using it and retry the affected area. I had this issues because of the activation area causing certain keys on the keyboard to become non responsive.
Sent from my Z1.
Has anyone tryed the touchfwtool?
URL itechdestiny.com/xperia-touch-screen-solution-touchfwtools-apk-download/
My phone is on the way back from repair. They only have calibrated the screen.