Hello Everyone here
In friday i`ve perform a successful synchornize between my device and my PC
But after ten meniutes of the beginning of the sync, the deveci has been desconnected from the PC
Please Help me if there is any solution for this problem
Notice : Charging is working well
noaman-atassi said:
Hello Everyone here
In friday i`ve perform a successful synchornize between my device and my PC
But after ten meniutes of the beginning of the sync, the deveci has been desconnected from the PC
Please Help me if there is any solution for this problem
Notice : Charging is working well
Click to expand...
Click to collapse
Try another USB port, try to disable and enable the driver, try to clean connector.
I`ve tried everything i can
Also it cannot be running on my old computer, i`ve opened the device and check the connector, it`s connected by the right way with the board
but i don`t know why it cannot be connected again
Related
laptop no longer recognizes tilt or tytn; changed usb cables; rebooted both devices and laptop; no go..
mssg I get is "one of the usb devices attached to this computer has malfunctioned. and windows does not recognize it"; any suggestions; cannot sunc nor tether via ISharing.
tia
a in yul said:
laptop no longer recognizes tilt or tytn; changed usb cables; rebooted both devices and laptop; no go..
mssg I get is "one of the usb devices attached to this computer has malfunctioned. and windows does not recognize it"; any suggestions; cannot sunc nor tether via ISharing.
tia
Click to expand...
Click to collapse
Hi
First of all try to reinstall Microsoft ActiveSync, than in the ActiveSync options, in your device, be sure that in "Connections..." setting "Synchronize all PC by this connection" is checked and below "USB" showed!
Otherwise, if your device, when connected to the PC, also doesn't charge (if you have this option enebled on your PDA!) there is some problem on your PC settings concerning the USB! Try to connect to someother PC to test it!
Ciao
thx...
@[email protected] said:
Hi
First of all try to reinstall Microsoft ActiveSync, than in the ActiveSync options, in your device, be sure that in "Connections..." setting "Synchronize all PC by this connection" is checked and below "USB" showed!
Otherwise, if your device, when connected to the PC, also doesn't charge (if you have this option enebled on your PDA!) there is some problem on your PC settings concerning the USB! Try to connect to someother PC to test it!
Ciao
Click to expand...
Click to collapse
hello there, first n foremost thanks for your input!
Before trying out your possible solution i tried to connect and for some reason i was able to connect via the device today...??!!
i really dont know why, but will try your soln if this situation reocurrs.
NB: this happenned to me twice in the last 3-4 months, n i never figured out the cause ??
any other advice or ideas gratefully accepted.;
its probably the same as me and loads of other people - the pins have bent on your usb connector - probably caused by using non standard chargers and usb leads. Its been widely reported. The non-standard leads have too much space around them when plugged in and wiggle causing the connector on the tytn II to bend. Try using the lead which came in the box and see if it helps. and try using the charger that came with it too.
Can bent pins be fixed?
Hello -- I'm one of those people with a non-recognition problem. Is it possible to fix the bent pins? My problem seems to have begun around the time I lost my original USB cable. Now, all the cables I have -- ones that have been specifically sold to work with my HTC Tilt -- have the symmetrical, sort-of-trapezoidal mini-usb connection, rather than the rectangle-with-one-corner-cut-off shape of the original cable. I should say these cables do charge my device, but none of my computers recognizes it as a USB device.
Help?
Thank you,
J. Georgia
bent pins continued
I should add that the charging cable that originally came with my phone has the same connector shape, so I'm not sure what's going on.
USB Device not recognised
This is known to happen at times win Windows, and not just for the TYTN2 but a myriad of devices.
The fastest fix for this:
Reboot ur PC/ Laptop.
If this Doesn't help - Then add in a reboot for the TYTN 2 also.
The problem will go away for some time.
I know its annoying, but this is way faster than troubleshooting for contacting MicroShaft Support.
axeman said:
This is known to happen at times win Windows, and not just for the TYTN2 but a myriad of devices.
The fastest fix for this:
Reboot ur PC/ Laptop.
If this Doesn't help - Then add in a reboot for the TYTN 2 also.
The problem will go away for some time.
I know its annoying, but this is way faster than troubleshooting for contacting MicroShaft Support.
Click to expand...
Click to collapse
Unfortunately this is no soution for me. I seem to have this problem as well, since about two weeks.
I use two notebooks (Dell & Acer) and both do not show any activity when connecting my Kaiser to the original USB cable. The device is not even switched on when I connect it, nor does this happen when I connect it to the (original) cable in my car, which did work before.
Charging works fine, both in the car and when connected to both notebooks, but no Sync at all.
I have tried another USB-cable with the same result, so I suspect some hardware-problem causing me to be unable to copy files between my notebook and my phone and worse, rendering me unable to flash a new ROM onto it.
Who knows what to do next?
I am mystified, too. USB Charging and audio connections work. I have rebooted my computer and done a soft reset on my phone several times, to no effect. I uninstalled and reinstalled Windows Mobile Device Center. Still nothing at all via USB. Once, yesterday, I somehow got a Bluetooth connection long enough to sync, but haven't been able to since then. Even then, Windows Media and AudibleManager couldn't see the phone. The really weird thing is, I can see the phone connection in my Bluetooth manager, but even with all the proper boxes checked, I can't sync. When I try from my device, I get an empty progress box which disappears after a fraction of a second. When I try from my computer, it says the device is not connected, but doesn't give me any option to connect.
Would a hard reset help?
If so, would returning an unlocked AT&T Tilt to factory defaults lock it back up? And what do I do if it does?
Please help!
J. Georgia
I have had similar problems with my touch pro in the past, even bluetooth internet sharing eventually gave up the ghost.
I tried a myriad of leads and then eventually reinstalled active sync- which did the trick.
USB sync not working
[email protected] said:
I am mystified, too. USB Charging and audio connections work. I have rebooted my computer and done a soft reset on my phone several times, to no effect. I uninstalled and reinstalled Windows Mobile Device Center. Still nothing at all via USB. Once, yesterday, I somehow got a Bluetooth connection long enough to sync, but haven't been able to since then. Even then, Windows Media and AudibleManager couldn't see the phone. The really weird thing is, I can see the phone connection in my Bluetooth manager, but even with all the proper boxes checked, I can't sync. When I try from my device, I get an empty progress box which disappears after a fraction of a second. When I try from my computer, it says the device is not connected, but doesn't give me any option to connect.
Would a hard reset help?
If so, would returning an unlocked AT&T Tilt to factory defaults lock it back up? And what do I do if it does?
Please help!
J. Georgia
Click to expand...
Click to collapse
I've had the same problem with my first Tilt. There's multiple threads that detail this known problem. Some seem to be due to bent pins, some are general hardware failures (possibly the USB controller). There are some HardSPL images out there that have a "force usb" option enabled. This never worked for me, but it might be worth a shot for you.
...a word of warning....
If you end up reflashing your phone (via MicroSD) and the flash goes bad, you may be stuck, as many of the solutions for repairing a bad flash require you to USB sync. My first Tilt was a victim of this after a bad stock ROM flash that left my device without audio, and unable to flash via MicroSD.
replace usb board
you need to replace your usb board. It will run you less than $10 if you do it yourself. you can get the board on ebay
really? 4 years later?
Hai..
iam new bie, i just newly purchased xperia xli. after using 4 month, iam now facing some problem, every time if i need to charge or connection for active sync i need to restart, and this repeats every time. and if i try to open task manager or Device information in settings it will give an error
"cannot open 'ctlpnl'. A critical conponent is either missing or cannot start because program memory is unavailable. Tap start> settings > system tab> task manager, stop programs that did not automatically stop and try again".
and i cannot even make screen off by pressing power button for that also i need to restart.
So please give me some information regarding this so that i can solve this problem.
Thank you
I would hardreset it
Thanks for reply
I had done it already, after hard reset first time i can charge and connect to active sync also, and if i disconnect it and try another time it wont work, again i have to hard reset to charge or to connect it to active sync. so pls give me solution for this,
for more information i will provide my device information
software version: R3AA003
ROM VERSION: 1.05.931.3 WWE
MODEL : XLI
xperia usb connection problem
i see no one is taking this matter seriously
i have googled for the past 4 weeks and it seams many people are having this problem with xperia/wm6 devices - its just that not many of them understand the problem and know how to express themselves (e.g. many belive it's a problem with the pc's usb ports)
i would suggest does interested in IT mysteries and things like that to look into this one. i can explain the problem here:
I've used xperia/windows mobile 6 device for about 6 months, syncing it daily or semi daily (or weekly..) all that time via USB connection and active sync installed on winxp.
one day i plugged the usb cord into my phone and - nothing. the phone has started charging as thou it's connected to a charger and not to a PC - one of the first things i noticed cause i specifically always have the "don't charge the device while connected to a pc" box ticked on.
what is very important to know is that NOTHING of the following didn't fix this problem:
changing cords
changing ports
changing pc's
soft reset via button on the back
hard reset
nudging the cable
usb hub pc connection
direct pc connection
updating windows mobile
toggling ANY option in the OS itself
charging/discharging the device
changing the chargin cable, then connecting
leaving it off without a battery for a long period of time (12+ hours)
---------all other idiotic suggestions that are being written all over the net by dumb asses who think they can shoot a guess and come of as smart guys---------
bear in mind that this happened after absolutely no physical damage to the device or any kind of extreme working conditions, exceeded cpu/memory use etc.
it would be great if someone could solve this mystery. activesync is still working via Bluetooth but it's just stupid to transfer files over the slow bluetooth connection whilst having a USB connection as one of the greatest advantages of this kind of a device
i kindly thank in advance to anyone having some kind of an idea about how it's possible for a USB connection to just stop working, for absolutely no reason.
bye&cheers!
Matija
Anyone has the solution for this problem? Like Matija said, it happened suddenly for no reason... My x1 has been facing this problem for 3 weeks
I cannot update my phone via my PC
I recently having problem with my X1 syncing with my home PC and charging from my Laptop
Now I found out that, those mini USB cable might be good enough to charge the phone, or even trying to sync, but then it gets error more and more often. So try getting some better quality cables (ie. those with "Magnetic Shield" near the end), see if that fix the problem
good luck
Flash another ROM?
rickysio said:
Flash another ROM?
Click to expand...
Click to collapse
I have done flash newest ROM by sd method... yet it's still not working
Changing the cable is the first thing I've ever done
up on this thread...
it's been sometime, I am having the same problem, tried all the above in vain..
any solutions?
Having the same problem here.. I faced it after I formatted it by clicking on (Clear Storage) under System tab.
Hello everyone, I have one question ....
When I first connected the phone (HD 7) to a computer via USB cable appeared to me the window that said to take the Zune application after I took off and connect the phone to the computer throw me a window with the text''PHONE SETUP INČOMPETE'' if anyone knows what the problem is and whether there is any program that you connect your phone to your computer to load the storage because I need to transfer images, music, etc..
Thanks. and please answer me. . .
goran95 said:
Hello everyone, I have one question ....
When I first connected the phone (HD 7) to a computer via USB cable appeared to me the window that said to take the Zune application after I took off and connect the phone to the computer throw me a window with the text''PHONE SETUP INČOMPETE'' if anyone knows what the problem is and whether there is any program that you connect your phone to your computer to load the storage because I need to transfer images, music, etc..
Thanks. and please answer me. . .
Click to expand...
Click to collapse
Hi,
If you want to exchange your pictures etc. from your PC you need to install Zune software first. Without Zune you can not do that.
i install it but when i connect my phone to pc he say connect a device ...?
goran95 said:
i install it but when i connect my phone to pc he say connect a device ...?
Click to expand...
Click to collapse
It looks like lack of drivers or maybe problem with USB cable.
make sure the cable is connected properly and your screen doesnt go off while your syncing or setting up cause that will terminate it.
thanks.is there any drivers to fix it?
1. What operating system are you using?
2. I note the first few times I plugged the phone into my pc (with Zune installed) it takes a while to fully launch and recognize.
So, plug the phone into your PC and wait a bit. Maybe it'll help.
i use win7 ultimate 64bit .all right i will be try that. thanks
recently i am faceing a lot of problems with the usb of my phone. it charges but doesnt connect to the pc plus it sometimes doesnt charge too i have to switch the phone off to charge it then.
my phone itself is not detecting the usb as when it does it pops up the usb debug icon on the status bar but it is not doing so.
Need help real bad!!
susmit95 said:
recently i am faceing a lot of problems with the usb of my phone. it charges but doesnt connect to the pc plus it sometimes doesnt charge too i have to switch the phone off to charge it then.
my phone itself is not detecting the usb as when it does it pops up the usb debug icon on the status bar but it is not doing so.
Need help real bad!!
Click to expand...
Click to collapse
I've been working with another member on this issue. Go here and read through my suggestions and see if one helps. The first thing I would try, is to uninstall sync manager and all drivers for the phone from your pc. Then, connect the phone and see if it reinstalls sync and the drivers. I hope this helps.
kibmikey1 said:
I've been working with another member on this issue. Go here and read through my suggestions and see if one helps. The first thing I would try, is to uninstall sync manager and all drivers for the phone from your pc. Then, connect the phone and see if it reinstalls sync and the drivers. I hope this helps.
Click to expand...
Click to collapse
yaa i have gone throught ur post a wyle bak. i tried it all. but there is no use. :crying:
I had same prob few days back. My htc one would behave madly. When i accept call automatically speaker gets on. It would not charge either by charger or by usb connection. Usb wouldn't recognize either.
See this psot
http://forum.xda-developers.com/showthread.php?t=2417377
Also see this
http://forums.androidcentral.com/htc-one/290813-htc-one-not-charging-usb-not-recognizing.html
I think is problem is large. After update htc one sucks. no doubt it added some great features. Or it may be hardware prob as always with HTC specially with HTC one X
usb problem
mine has also stopped working. does charge but not connecting to computer . running xp so drivers ok . definitely phone problem as friends htc one connects fine..
Disable usb debugging, it will connect
Sent from my One using xda app-developers app
usb problem
thanks , but tried everything. wont connect in fastboot, recovery or anything. cannot relock bootloader or return to stock so just returning it for warranty as it is with fingers crossed. unless someone can tell me if possible without connecting to pc.
are you using a usb 3.0 port
usb problem
usb 2.0 . i have two friends with htc one's and they both connect just fine.
Same issue here! Last night pulled my phone out and it said "incompatible charger, please use original charger". I wasn't even charging the phone, and now it wont charge or connect to PC unless the phone is off. Tried turning off debug/developer/power save/fastboot/ etc with no luck so far.
Hi, I searched in the Internet but didn't find any answer..
my galaxy s plus USB port stopped working Without any reason every time I try to charge or Plug it to my pc nothing happens..
And the most weird thing about all this is that except this problem the device work totally fine without any problems.
Please help!! :crying:
Daniel231 said:
Hi, I searched in the Internet but didn't find any answer..
my galaxy s plus USB port stopped working Without any reason every time I try to charge or Plug it to my pc nothing happens..
And the most weird thing about all this is that except this problem the device work totally fine without any problems.
Please help!! :crying:
Click to expand...
Click to collapse
use this guide, look at Cleaning and looseness more closely than others.
Check this out! You , YES! you are an " Android ". Not your phone but U.
Daniel231 said:
Hi, I searched in the Internet but didn't find any answer..
my galaxy s plus USB port stopped working Without any reason every time I try to charge or Plug it to my pc nothing happens..
And the most weird thing about all this is that except this problem the device work totally fine without any problems.
Please help!! :crying:
Click to expand...
Click to collapse
may be disabled options usb conntecting in Options-Memory..