[Q] Failed to upgrade with KIES - Galaxy S I9000 Q&A, Help & Troubleshooting

I'm trying to upgrade from JPA to JPX with Kies with the reghack and the firmware is available in Kies, then it starts upgrading, Kies loses connection with the phone and 5 minutes later I get the message: "Failed to convert to upgrade mode. Try again later."
I've tried several times with both Windows 7 x86 and Windows 7 x64 and both have the same problem.
Any solution on this?

I had the same thing, unplugged the phone and decided to try again.
When I plugged it back it KIES told me there was firmware recovery available, so I did that and it put 2.2.1 on

I had something similar - I left the phone in and went to the failure notice within windows where it said drivers failed to install. I then selected search for drivers online (or something like that) and it installed the right//correct drivers and the firmware update continued.

Related

[Q] prob with download mode

hello i found this forum great for mod my samsung galaxy s here i found a lot of thinks.
but here is my problem i have already install the samsung kies and android sdk, but when i trie to update my phone with kies the process run normally until it come the time that kies put the phone in download mode, there i receive a messege on the windows task bar like i have disconnected the phone and then it says that "error unknow device" and the upgrade on kies cant go on.
any help plz thanks
i have a att galaxy s rooted
windows 7 32bit
latest version of kies
First thing to try is test each of the different usb ports on your computer - if you get the same error on each port then my first instinct would be to reinstall the samsung drivers for your computer.
If you try reinstalling the drivers below is a link to the drivers that have worked the best for me.
http://www.mediafire.com/?0b45zo7o75rc5d5 - samsung captivate windows 32 bit drivers
thanks for your replay. i already have uninstall the drivers and reinstall them with no success, but i will try to test it in other usb port and report later
this is soo bad i have try both of you recomendations and still says usb device not recognize. then it says no driver was install and when i click that it says on the driver part that windows have stop the device for a error code 43.
i have search a lot and i havent find anything close to my problem can anyone else give recomendations on this or tell me if you know something similar to this happend to other users.
ps - i also try on a win xp 32 with the same result

[Q] Usb not Recognised SGS HELP?

I have seen posts on here regarding this error for the sgs althought none of the solutions that have came up are working on my sgs.
i have tried multiple os and every driver you can think of also i have used usb debug mode and altered between what usb port i am using..
My main os is windows 7 64bit the error i get on screen is:
usb device not recognised...so drivers wont install. skip to device manager and then there is and unknown device when i view this windows gives the error :
Windows has stopped this device because it has reported problems. (Code 43)
its really starting to destroy my soul...none of the methods previously posted are working..
Please help
You dont mention Kies installed .
Install Kies on phone go to settings and select mass storage mode .
Connect USB cable wait for pc to find phone and install drivers .
jje
yeah sorry kies is installed i tried different versions of that aswell.
There is an install driver option in Kees, try to re-install driver. Be aware that in kies it takes too long to install driver(don't know why), for long time it will show 100% in progress bar but wait until you get driver successfully installed driver message in Kies, it tool more than 10 mins.
Just fixed the similar problem today only, on Windows 7 64 bit, was struggling to but re-installation worked. Earlier I also tried reinstall driver but I thought it stuck on installation so I canceled but not today I gave it full time hence I said wait till you get success message. I didn't connected the device till driver installed.
May be your problem will also get fixed by this, nothing wrong in trying.

Cannot connect to Kies: neverending "connecting"

I've latest KIES version, the tab is rooted and cwmodded but stock rom. When I try to connect it to kies I get a neverending "connecting", so basically it never establishes a connection. I tried reinstaling drivers and with and without debug usb, but no luck. Do you have any clue?
same as my tab,
Sent from my GT-I9300 using xda app-developers app
Problem with KIES
My tablet is not rooted, it have stock rom, haven't changed anything. I have installed latest KIES on my laptop with Win 7 x64. When I try to connect my tablet to PC, I can access it's contains, but if I try to connect to KIES it say: Cannot start service on the device. Please disconnect and reconnect the device. I try that too, but every time it's the same. I have tried to re-install KIES couple of times, but it's always the same story... Anybody have some ideas?
I able to connect in the pass, that was how I get android 3.1 upgraded to 3.2
Sent from my GT-I9300 using xda app-developers app
I had the same issue, then I reinstalled the drivers, REinstalled KIES and there even was some messing around in "services". for WIFI connection thou, but it fixed my connection issue via cable.
When I bought my "8.9 tab wifi only"and plugged it up for the first time i had no problems using kies. It updated to 3.2 the NEVER worked again.Once you install kies it installes your drivers. If you uninstall kies it will ask if you want to keep the drivers or uninstall them."KEEP THE DRIVERS" I don't use kies at all. I use drag-n-drop to transfer files.You may also notice at times when moving files"mostly video" that windows explorer will crash"may just be my p.c." but a way around that is to simply zip the file,move it to your device,unzip from device using a file manager,I use "file manager HD"
Galaxy Tab 8.9 not connecting to Kies
Same problem here, Connected first time to Kies but since updating Kies I have never been able to connect.
Uninstalled and Reinstalled various times, restarting computer but still inop.
kies has many problems in its own software... ur pc can see it very well... samsung released a "Piece of Cr*P" software to just show themselves... Kies isnt really useful for anything rather than updates and syncronizing...
I saw someone posted a quote from samsung about the kies problem, and the only answer was its kies thats messing, not the tablet
I had this problem and I fixed it by reinstalling kies and basically enabling WIFI synk from pc (Kies setup guide) and after that it works from the USB.
(sorry for typos)
I had a similar problem but I ended up downloading the latest version of keis first. I also checked to make sure my computer was up to date with the latest usb drivers. After an update the Samsung keis software recognized my tab and was up and running.
Sent from my GT-P7310 using Tapatalk 2
first you should have usb debugging off
second, I tried all sorts of solutions (like uninstall/ install back again for kies or drivers and so on). I think there is a problem with the drivers.
If you plug in your tab, go to device manager and look for unknown devices or so (entries with exclamation marks and so )
I got it installed as samsung composite usb but also got part of the drivers not being correctly installed ( PCI flash memory having exclamation mark)
the only solution I found was to factory reset the tab. I did this and the tab is now recognized by Kies via USB without doing any additional work to the drivers or kies installation
latest kies version as of the post date, Windows 7 professional x64.
I still don't know if it was some wrong setting for an app or the firmware itself had something messed.
by the way, the tab was only 2 weeks old and it didn't connect from the very first time although the tab was just out of the box with no root/CWM recovery. just everything stock with normal apps and it didn't connect.
it happen to my nexus, but when I change to other PC, it working fine.. my 8.93G connecting very good for this moment and hope it will till i sell it..

[Q] Trouble with Samsung USB Drivers version 1.5.18.0 + KIES

Hello.
I recently tried to root my phone with the S3 Mini Toolkit. I have the GT-I8190 international version.
It said that I needed to Install the device drivers first (which is the v1.5.18.0).
So I did it as instructed in the command prompt. When it finished installing the driver, and I plugged my device as instructed, suddenly came an error message "Samsung Hardware ID is missing error", and my Mini became unrecognized all of a sudden. I couldn't access my device storage.
There was an error message too popped up in my device saying that It cannot find a driver in my PC for my device.
I tried to install KIES afterward, hoping that it can solve the problem. Thing is, it didn't. My device was still not recognized, and KIES couldn't recognize it either (Connecting.....for, like forever).
I then tried to Google the problem, and came by a forum, saying that it was the 1.5 USB Drivers that caused the problem (but the case being talked in the forum is for Galaxy S3). Said that my PC need to uninstall the 1.5 drivers, uninstall KIES, deactivate the automatic device installation by Windows, and install the 1.4 version.
Well, what I can find in the internet is the 1.3 USB Drivers, so I tried the instructions, and installed the version 1.3 USB Drivers, and my PC recognized my device again, and able to access the storage.
(also, the 1.3 drivers made Odin unable to recognize my phone too in download mode).
Does anybody here have ever experienced the same problem as mine? Or did I do something wrong?
I managed to root my Mini, being not recognized by the PC (but registered at the toolkit) in the whole process, and then did the whole uninstalling and re-install the USB drivers so that I can access my storage again.
Because it's rather a painful process if in the future I want to use the toolkit again with the newest drivers.
Note:
- before rooting, I did the latest OTA update.
My current device info is
Android version 4.1.2
Baseband version I8190DXAMA2
Build vnumber JZO54K.I8190DXAMA2
Region Indonesia
Thank you very much
Bumped. Can anybody gives me some enlightenment about this issue? Thanks

[Q] Bricked Galaxy Gear

Hi guys! I have a big problem, because in the past I installed null rom on my gear, but today I wanted to update it to Tizen. So, I tried it with Odin, but it stuck and show a message Setup Connection... So I tried it again and again and again. Maybe 2x it skipped this message, but then it stucked I think in zImage or something like this. Then I unplug the cable from PC (when it showed me zImage) and now it is showing an error message on my Gear: Firmware update encountered an issue. Please select recovery mode in Kies and try again.
But the problem is that Kies didnt connect to my gear, it is "Connecting" non-stop. So it recognise that something is in PC, but it didnt recognize that is my Gear. In Odin I have the same problem that i mentioned earlier in this post. Setup Connection and it is completely frozen. I tried everything. Other USB ports (I think 7 different ports), I tried to flash stock rom on another PC, I reinstalled the Samsung USB drivers, I tried to flash custom recovery, I tried different versions of Odin, maybe 10 alternatives from 1.5.2 to 3.09... So I dont know what should I do. Please help me an sorry for my terrible english, but I hope you understand me.
Thank you!
//PROBLEM SOLVED
I downloded stock android 4.2.2 and flash it with odin 3.09 on Windows 7 without problems.

Categories

Resources