[Q] Help! Black screen and vibrate every 2min - Galaxy S I9000 Q&A, Help & Troubleshooting

Im pretty new to androids and I installed the Battery Icon Mod without realising that I could harm my phone. Now on reboot it gets passed the "S" screen but just sits there with a black screen and vibrates every 2 min.
Im a bit unsure what to do from here.
The details of my phone are:
Build#FROYO.DTJP5
BaseBand I9000DTJP3
PDA: TJP5
Phone: DTJP3
CSC OPSJP4
Build:2010.11
Austrailian, Optus Network.
I recently reverted from recovery 3e to 2e (no clockwork Recovery) and did the fix to enable the 3 button recovery (Im very glad I did this now!!). I also got root with z4root and have a full app and system backup on my sdcard with Titanium backup
I dont know too much about the details of flashing (Although I was learning as much as possible as I wanted to apply the z4mod with EXT2 lagfix).
What should I try first to minimise damage and get back to as stock as possible?
edit:
I should just add that I have gone to this thread http://forum.xda-developers.com/showthread.php?t=846913 and found what I believe to be my firmware I9000DTJP5|2.2|2010 November listed under USA, would this be the same? I have also downloaded the CSC file which dosent seem to include my version (Do i even need to flash this file??)
Thanks in advance!

floopyb said:
Im pretty new to androids and I installed the Battery Icon Mod without realising that I could harm my phone. Now on reboot it gets passed the "S" screen but just sits there with a black screen and vibrates every 2 min.
Im a bit unsure what to do from here.
The details of my phone are:
Build#FROYO.DTJP5
BaseBand I9000DTJP3
PDA: TJP5
Phone: DTJP3
CSC OPSJP4
Build:2010.11
Austrailian, Optus Network.
I recently reverted from recovery 3e to 2e (no clockwork Recovery) and did the fix to enable the 3 button recovery (Im very glad I did this now!!). I also got root with z4root and have a full app and system backup on my sdcard with Titanium backup
I dont know too much about the details of flashing (Although I was learning as much as possible as I wanted to apply the z4mod with EXT2 lagfix).
What should I try first to minimise damage and get back to as stock as possible?
edit:
I should just add that I have gone to this thread http://forum.xda-developers.com/showthread.php?t=846913 and found what I believe to be my firmware I9000DTJP5|2.2|2010 November listed under USA, would this be the same? I have also downloaded the CSC file which dosent seem to include my version (Do i even need to flash this file??)
Thanks in advance!
Click to expand...
Click to collapse
same thing happened to my Galaxy s mate early this morning while tryng to flash new firmware what you can do is factory reset your phone to get there you follow the 3 button recovery instruction press all these buttons at the same time volume up+power button+home aryt hope you can get it fix

blazingcaloy said:
same thing happened to my Galaxy s mate early this morning while tryng to flash new firmware what you can do is factory reset your phone to get there you follow the 3 button recovery instruction press all these buttons at the same time volume up+power button+home aryt hope you can get it fix
Click to expand...
Click to collapse
Thanks for the help but that didnt work
Went into the recovery and chose "wipe data/factory reset"
Still got black screen and intermittent vibrating. When I press the back button I also get vibration.
Do I need to flash? If so what files do I need to flash? Just the PDA?

floopyb said:
Thanks for the help but that didnt work
Went into the recovery and chose "wipe data/factory reset"
Still got black screen and intermittent vibrating. When I press the back button I also get vibration.
Do I need to flash? If so what files do I need to flash? Just the PDA?
Click to expand...
Click to collapse
Flash stock rom with odin. Search these forums for the stock optus rom or download 2.1 jg4 from samfirmware to get your phone up and running then flash jp5 again.

floopyb said:
Im pretty new to androids and I installed the Battery Icon Mod without realising that I could harm my phone. Now on reboot it gets passed the "S" screen but just sits there with a black screen and vibrates every 2 min.
Click to expand...
Click to collapse
Hi I've got exactly the same problem as you and I recover it by re-flashing a stock filmware with Odin.You might want to follow this link on how to do it?Hope it helps!Cheers!
http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install-froyo.html

Thanks guys! I reflashed jg4 then updated with Kies to get froyo! I tried reflashing jp5 but it didnt have the optus apps, so I flashed back to jg4 then used Kies.
Thanks!

Related

[Q] Flashed Batterymod, but...!

I just flashed a battery mod on my galaxy s.
But i think i downloaded the Wrong one!!! When i did a reboot, the process 'android.phone' stopped working. Mmmm.. OK.
Tried a factory reset through the 3 button menu. Well now it does not do anything, i can see the boot movie, but then i get a Black screen with an heartbeat on the vibration thingy.
I did not panic and tried to flash an other firmware. Well it did not work. I see the boot movie, but then the screen blacks out and nothing works......
I searched for this, but i didnt get a good answer on how to solve this.
So if anyone is kind enough to help me, and tell me what to do in simple steps.
The same here. I used version D for JP6 & the 2nd method.
I had to reflash the softwear.
Exact same problem with me, had to reflash. Could someone tell the guy who has the battery mod thread?
Sent from my GT-I9000 using XDA App
Antonyjeweet said:
I just flashed a battery mod on my galaxy s.
But i think i downloaded the Wrong one!!! When i did a reboot, the process 'android.phone' stopped working. Mmmm.. OK.
Tried a factory reset through the 3 button menu. Well now it does not do anything, i can see the boot movie, but then i get a Black screen with an heartbeat on the vibration thingy.
I did not panic and tried to flash an other firmware. Well it did not work. I see the boot movie, but then the screen blacks out and nothing works......
I searched for this, but i didnt get a good answer on how to solve this.
So if anyone is kind enough to help me, and tell me what to do in simple steps.
Click to expand...
Click to collapse
1st. You need to flash a fresh firmware I suggest a official one so you can download the latest JP6 from kies without knifing the registry. you can get those firmwares from http://www.samfirmware.com/WEBPROTECT-i9000.htm but you need to register first. And here are the intructions how to flash http://samsunggalaxysforums.com/sho...and-and-flash-newer-firmware-to-your-Galaxy-S
2nd. After a succesfull flash go to recoverymode (shut down device, hold: vol-up, home and power)
wipe cache and do a factory reset just incase, and boot your device.
3rd. Install JP6 through Kies
edit:
BTW im a noob who did just this after i messed my phone to a state like mentioned in op So i dont take any responsibility about any damage you do to your phone. I did something like this and now i have official JP6 inside my sgs and its flying

Unable to reboot in download mode

I find my newly purchased tab 8.9 very laggy with the stock TouchWiz
Before returning it I wanted ti try the Overcome rom to see if it can get any smoother.
I carefully followed there instructions but I am unable to go past the downloading droid. once I validate with the right button volume, the tablet simply reboots.
Does anyone else have this issue?
josibarns said:
I find my newly purchased tab 8.9 very laggy with the stock TouchWiz
Before returning it I wanted ti try the Overcome rom to see if it can get any smoother.
I carefully followed there instructions but I am unable to go past the downloading droid. once I validate with the right button volume, the tablet simply reboots.
Does anyone else have this issue?
Click to expand...
Click to collapse
Let me get this right: you sucessfully flashed Overcome, and want to ODIN but when you try to get in Download Mode, it reboots, is that it? If so, that's the first time I've heard this issue. How are you trying to enter Download Mode?
nirogu325 said:
Let me get this right: you sucessfully flashed Overcome, and want to ODIN but when you try to get in Download Mode, it reboots, is that it? If so, that's the first time I've heard this issue. How are you trying to enter Download Mode?
Click to expand...
Click to collapse
I am still with the Samsung original
I wanted to try the overcome ROM see if the lag disapears.
I am stuck in the first step when I need to flash CWR using Odin. I can't get into the download menu
josibarns said:
I am still with the Samsung original
I wanted to try the overcome ROM see if the lag disapears.
I am stuck in the first step when I need to flash CWR using Odin. I can't get into the download menu
Click to expand...
Click to collapse
I see. The Overcome thread also has the CWM Recovery as a .zip file which is flashable through Stock Recovery (same procedure as flashing Root). You just put the file in your internal SDcard and flash away. If you still have doubts, read a little bit here, as I'm sure that will clear any doubts you might have.
josibarns said:
I find my newly purchased tab 8.9 very laggy with the stock TouchWiz
Before returning it I wanted ti try the Overcome rom to see if it can get any smoother.
I carefully followed there instructions but I am unable to go past the downloading droid. once I validate with the right button volume, the tablet simply reboots.
Does anyone else have this issue?
Click to expand...
Click to collapse
u have to press the power and the left-volume button for about 15sec
nirogu325 said:
I see. The Overcome thread also has the CWM Recovery as a .zip file which is flashable through Stock Recovery (same procedure as flashing Root). You just put the file in your internal SDcard and flash away. If you still have doubts, read a little bit here, as I'm sure that will clear any doubts you might have.
Click to expand...
Click to collapse
Perfect it worked! And I was also able to install the Overcome ROM It seems to be more battery hungry and a bit faster
DonKomposto said:
u have to press the power and the left-volume button for about 15sec
Click to expand...
Click to collapse
Yes I have done that and I get to the menu with the droid blinking with "downloading" written under it. The issues is when I validate instead of showing the dowload menue it simply reboots...
josibarns said:
Perfect it worked! And I was also able to install the Overcome ROM It seems to be more battery hungry and a bit faster.
Click to expand...
Click to collapse
Don't expect perfection from a port, ever (port = a ROM that's not native to the device). The motley kernel, along with UV can help you in the battery department.
Sent from my GT-P7310
Sorry to comeback to it but after having flashed a couple or ROM with CWM I want to come back to the stock rom using ODIN and I cannot enter the dowload menu.
My system right now is a stock ROM us retail P7310UEKHA flashed with CWM and CWM and I want to install a 3.2 stock ROM using ODIN.
The way I try to access the download menu is
1. Turn off the tab
2. wait 30 sec
3. restart with the down volume pressed
4. when the reaching the menu between recovery and dowloading. Select dowloading with the down volume button and validate with the up volume button.
Result: a black screen for 3 seconds and then the tab reboots
josibarns said:
Sorry to comeback to it but after having flashed a couple or ROM with CWM I want to come back to the stock rom using ODIN and I cannot enter the dowload menu.
My system right now is a stock ROM us retail P7310UEKHA flashed with CWM and CWM and I want to install a 3.2 stock ROM using ODIN.
The way I try to access the download menu is
1. Turn off the tab
2. wait 30 sec
3. restart with the down volume pressed
4. when the reaching the menu between recovery and dowloading. Select dowloading with the down volume button and validate with the up volume button.
Result: a black screen for 3 seconds and then the tab reboots
Click to expand...
Click to collapse
A corrupt bootloader that may be. Reflash KHA (CWM version alterbridge posted) to see if it solves it.
Sent from my SGH-T959.
Just to precise this issue was present out of the box when I got it from best buy...
josibarns said:
Just to precise this issue was present out of the box when I got it from best buy...
Click to expand...
Click to collapse
flash a stock bootloader and a stock recovery using nvflash, im in a hurry now and dont have time to explain, use google, you will find all the info in the tab 10.1 forum.
lupu666ro said:
flash a stock bootloader and a stock recovery using nvflash, im in a hurry now and dont have time to explain, use google, you will find all the info in the tab 10.1 forum.
Click to expand...
Click to collapse
Thanks lupu666ro. I've tried installing stock Rom with CMW but nothing works. I have found very sparse info about nvflash. It looks like the solution but I'm a bit wary about tring this without a instructions. Could give me more info or point me to a tutorial
Thanks!
Still no luck...
So I have tried reflashing the stock US retail ROM and ran the EULA3 OTA update over it. I can't seem to figure this out.
The OTA update entered the download mode for a few seconds during the update so I am wondering if I don't simply have a locked bootloader.
I have made a video to show the problem: http://youtu.be/b09-x31ldbs
josibarns said:
So I have tried reflashing the stock US retail ROM and ran the EULA3 OTA update over it. I can't seem to figure this out.
The OTA update entered the download mode for a few seconds during the update so I am wondering if I don't simply have a locked bootloader.
I have made a video to show the problem: http://youtu.be/b09-x31ldbs
Click to expand...
Click to collapse
here is a tutorial on how to use nvflash, this will repair you tablet. http://forum.xda-developers.com/showthread.php?t=1130574
On the download warning screen you are hitting volume down, not up. Volume up is the button closest to the headphone jack..
josibarns said:
So I have tried reflashing the stock US retail ROM and ran the EULA3 OTA update over it. I can't seem to figure this out.
The OTA update entered the download mode for a few seconds during the update so I am wondering if I don't simply have a locked bootloader.
I have made a video to show the problem: http://youtu.be/b09-x31ldbs
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I957 using XDA App
neubauej said:
On the download warning screen you are hitting volume down, not up. Volume up is the button closest to the headphone jack..
Click to expand...
Click to collapse
Ok I am really ashamed on this one, you were right I've been hitting the wrong button for all my attempts
Thanks a lot neubauej!!!!!
Lol, no problem, glad it was simple.
Sent from my SAMSUNG-SGH-I777 using XDA App

[Q] Samsung Galaxy S I9000M Boot Screen Loop

Hi there, I am new to this forum as I am trying to fix my gf's Samsung Galaxy S i9000M on Bell.
I tried to search up boot loop and have tried a few different ideas on the board but it doesn't seem to work.
Would like to know if anyone can help.
Here are the specs: Samsung Galaxy S i9000M - unrooted / stock.
Problem: The phone when turned on will only show the "Samsung Galaxy S I9000M" screen. It will turn black and then reloop itself. I have tried the 3 button boot to "download mode" and have successfully connected to ODIN.
I have tried to download PDA/Phone/CSC from one of the pages on this forum containing North American firmware files.
However, the problem still persists! I cannot check the OS version as I can't get the phone to boot into the OS. Is this a bootloader corruption problem? What should I do to try to fix this issue?
Any help would be greatly appreciated! THANK YOU in advance.
I assume you want Gingerbread?
If so, you want the UGKG3 download from Bell (it's the only GB ROM from Bell to date).
Go here and search for UGKG3.
The file is in 7Zip format. If you do not have anything to unpack it with, download IZArc.
Thanks for responding so quickly.
I did try the GB firmware - flashed it with ODIN - the software says successful.
But once the phone boots - it goes back into the loop - it does not know to unpack the OS to try to install and boot into it....
Any other ideas? Thanks again!
Did you flash it as a single file or 3 files?
You need to unpack the 7Zip file so you end up with 3 files:
Select PDA_UGKG3_Sbl.tar.md5 for PDA
Select CSC_BMCKG3.tar.md5 for CSC
Select PHONE_UGKG3.tar.md5 PHONE
Then flash with Odin. That should get the phone up and running again.
---------- Post added at 11:20 PM ---------- Previous post was at 11:17 PM ----------
How long has she had the phone? I wonder if she was on Froyo or GB.
Can you get into the recovery menu?
Thanks for your response.
I have unpacked all three files and loaded it into ODIN as per the firmware upgrade instructions on the thread you provided me.
I have also tried loading in both both the GB and the Froyo versions (UGKG3, UGJK3). After the "successful" message on ODIN, the phone boots up - shows the Samsung Galaxy GT I9000M screen and then goes black and keeps looping again.
I have a feeling this made me a problem with the bootloader. If the phone is completely stock, which one should i try flashing?
As the phone is stock there isn't a recovery (CWM) that i know of.... Or am I incorrect?
thanks again for your help!
OK, thanks for the clarification.
There should be the stock recovery from Samsung (2e or 3e).
Yes, it does sound like a bootloader problem.
Is it still under warranty?
EDIT: What is the build date for the phone? There will be a number in YY.MM format under the battery.
See if you can get into the recovery and try to clear the cache. That may give an indication as to what is going on.
We've had the phone for a year and a few months, so no more warranty.
In fact, we brought it back to bell store and they said there is "no way" the phone can be fixed. (yea right).
So I see a bunch of bootloaders in the forum here. Are there specific ones that work for the GT i9000M on bell? Or since I've tried flashing gb on the phone, do I need to download one that is specific to the OS? sorry as I am quite a n00b at this.
thanks!
The 3 file ROMs include a boot loader.
The GB one for Bell only includes the secondary bootloader (sbl.bin).
Bell no longer sells the i9000m, so they are hoping you'll simply buy a new one.
Your GFs phone is a couple of months older than ours. I bet the phone is one of the ones that has the issue where the internal storage is known to fail (builds prior to 11.03).
If that's the case, I think Samsung may repair/replace it, since it's a known issue with the early i9000m phones.
Did the phone get updated via Kies recently?
thanks again for following up.
How do I test if the phone's internal storage failed?
No I have not tried to update the phone via KIES. How does this work and what will it do?
Thanks!
Going into recovery and clearing the cache might show it.
If you see an error message that it can't mount something, that would be an indication.
EDIT: What's the build code?
I can't get into a recovery mode because the phone doesn't have CWM nor can I get by even the Samsung screen when it first turns on.
How do you flash via KIES? All I can do is get the phone into download mode. Can't do anything more.
Thanks.
Boot loop on stock Bell GT-I9000M
I have the same issue and still trying to find a solution.
Can't get into recovery. From most of what I read it's the boot loader. But I may be wrong, I 'm very new to this. I flashed with I9000UGKG3-homebinary with no luck. I did not however try the Sbl.bin file yet. I can still get to the Download mode and don't want to loose that ability.
Any help would be greatly appreciated.
galaxy s vibrant GT-I9000M
Bell mobility
Stock unrooted
GB
although you do not have CWM you should have a stock recovery... I know you have probably already tried.. but try again.
Menu+Power+Volume up...release only the power button as soon as the initial screen disappears.
if you do get into this screen you can do full wipes...
--pm me if you live in the Toronto area
It also might be a boot loader problem depending on what version of of android you were on and what you tried to do with odin and if you had the right version with the bootloaders etc.....
viperm5 said:
I can't get into a recovery mode because the phone doesn't have CWM nor can I get by even the Samsung screen when it first turns on.
How do you flash via KIES? All I can do is get the phone into download mode. Can't do anything more.
Thanks.
Click to expand...
Click to collapse
As dlockhart said, you should have the stock recovery on the phone.
Since you can get into download mode, you should be able to get into recovery mode by pressing volume up+home+power button.
Flashing through Kies only works if your phone will actually boot.
Since the phone is constantly boot looping, i tried to go into the stock recovery mode multiple times with the volume up + menu + power combination. Tried releasing the power button when the words are on the screen, when it is blank, and other permutations - but i cannot get into the stock recovery.
Once i press the volume down button instead though, i can quickly jump into download mode.
Is this normal? or am i doing something completely wrong?
Is there another way to get into stock recovery mode?
Don't release the power button until you see the recovery screen.
maybe also try flashing another kernel?
Boot loop on stock Bell GT-I9000M
I have tried to get to the recovery screen also with varied timing on button presses and releases, but no luck. Vol down and power gets me to download screen every time though.
I would keep trying the volume up power and home and as soon as you see the black background with galaxy showing let go of all buttons but wait until you see it restart again. So you'll hold vol. up + power + home and your phone will restart and you'll see the galaxy words keep holding the buttons until it restarts again and when you see the words let go of all three buttons. Now if your willing to switch kernels I would go to www.darkyrom.com and follow the directions there for flashing darkyrom 10.4.2 its just as smooth as stock but its not stock and voids your waranty, but since you dont have a waranty go for it. Good luck if you need any extra help you can pm me as well. I have had my phone since Oct. 2010 and flashed atleast a hundred roms and thought i broke my phone a few times but these thing are damn near impossible to totally mess up.
Sent from my GT-I9000 using Tapatalk
Is there a minimum remaining battery-life requirement for the device to enter Recovery?
Does the 3-button Recovery require power cable to be attached or not?
For what its worth, my I9000m has a Build Date of 11.04 and came with Froyo 2.2, so unless he already updated he's definitely not on 2.3.3
Downloading Kies to your PC and updating to 2.3.3 that way, just might work. Thats what I did.

strange problem with charging, bootloop, pls help

Hi,
I rooted my note some weeks ago and I was searching the web, reading all kind of threads and thinking what the problem might be for the last weeks. Finally I decided to register myself on xda and to post my problem.
Like mentioned before I rooted my note via CMW and then flashed a franco kernel, unfortunally I dont know which version, but no custom rom. It all worked fine for 14 maybe 16 hours, then the phone froze after opening a app and after that it stuck at the Galaxy Note N7000 logo. I tried to enter recovery but it didn't work, I can enter downloadmode but I ran out of battery before I could do anything.
Now the phone keeps turning itself on and off the whole time when I try to charge it, the battery image comes for like 1 second and after that the screen turns black again. The battery itself is new so that shouldnt be the problem. I charged it like that for like 4 hours and then tried to enter downloadmode but it only says "battery to low to download".
I hope it is not a hardware problem. If anybody has a idea please help me, I am getting desperate.
Greets
weasl
EDIT: I came from offical 4.0.4 ICS
How old is your phone? Try with another good battery.
Suggestion: you may flash gb via PC Odin and check phone back to normal.
Sent from my GT-N7000 using xda premium
I got my phone last april, so it is not even a year old, but I got a new battery some days before rooting it... I'll try/have to get another one anyway.
Could you give me a link for a stock gb rom please.
Thank you for your quick reply.
Kindly go thru Guru 'drketan' threads and posts.
Sent from my GT-N7000 using xda premium
Found it. Should I use a rom with three parts or with only one? And can I use any rom or one with a special "code" that suits my device, e.g. german....
And just flash the rom and then fullwipe or is wiping not necessary?
I am sorry for the questions but I want to do everything right.
You can use any. Wipe in GB recovery.
Thanks a lot.
Yesterday I finally found somebody to charge my battery, today I flashed a GB stock rom, but I still can`t get any further than the Samsung Galaxy Note logo... It worked one time but I turned the phone off to insert my sim card and it got stuck again.
I tried flashing with pit file and bootloader as well, but no luck.
Could it be a hardware problem? Could a J-tag repair fix it?
Thanks in advantage.
weasl said:
Yesterday I finally found somebody to charge my battery, today I flashed a GB stock rom, but I still can`t get any further than the Samsung Galaxy Note logo... It worked one time but I turned the phone off to insert my sim card and it got stuck again.
I tried flashing with pit file and bootloader as well, but no luck.
Could it be a hardware problem? Could a J-tag repair fix it?
Thanks in advantage.
Click to expand...
Click to collapse
Now your on safe GB rom, enter recovery wipe cache, factory reset, wipe dalvick cache.
Let's know the result
I tried, but I am not able to enter recovery... I press volume up + home + power but I only get the N7000 logo. I have read that you have to press the home button in the right moment to enter stock recovery, could somebody tell if that is true and if yes when do I have to press?
Anyone an idea please? I can enter download mode but not recovery, I downgraded to gb 2.3.6.KK5, I flashed abyss 4.2 but I can get to recovery mode or past the GT N7000 logo. Three times it got to the "package installing" page and one time it even started then I switched it off to insert my sim card and again stuck at the N7000 logo.
I need help please...
weasl said:
I tried, but I am not able to enter recovery... I press volume up + home + power but I only get the N7000 logo. I have read that you have to press the home button in the right moment to enter stock recovery, could somebody tell if that is true and if yes when do I have to press?
Click to expand...
Click to collapse
You have to press the three button combo "a long time" and the power button should be the last one to use.
I always wait until the Samsung Logo appeared 2 times and I see the next animation (depends on your kernel/recovery).
So please try again and hold the three buttons longer.
I flashed the 3-part lc1 gb and did a full wipe. The phone now starts sometimes but gets stuck at the n7000 logo most of the time. When it starts the whole UI feels very laggy, eg. while typing. Recovery mode started one time out of 1000 tries. I am afraid that something with my hardware is wrong. Any ideas? Could a Jtag be a solution? Please help.
try again to get into recovery and do a factory reset from Gb recovery..
press it until you get to recovery. DO NOT remove your fingers when you see n7000 bootlogo. keep pressing . keep pressing. keep pressing.
Recognized Distributor™
I made it in the recovery, did another fullwipe, but it still lags while typing or opening/closing an app and still does not boot proper, I have to try several times to get past the logo screen and it works only when I go in downloadmode and boot from there. Entering the recoverymode still only works randomly. Any idea?
Edit: it also lags while scrolling down/up
weasl said:
I made it in the recovery, did another fullwipe, but it still lags while typing or opening/closing an app and still does not boot proper, I have to try several times to get past the logo screen and it works only when I go in downloadmode and boot from there. Entering the recoverymode still only works randomly. Any idea?
Edit: it also lags while scrolling down/up
Click to expand...
Click to collapse
In all you posts here you never wrote exactly what version of which Rom you installed in whatever way.
That's why I'm still not convinced that you have "defined state" and giving good advice is try&error.
So please start telling: how did you flash, what GB or ICS or JB version, Stock Rom or Custom Rom.
,Sorry, I flashed the n7000xxlc1 - open europe with odin PC, stock, prerooted and in 3 parts. After that I did a fullwipe, the phone turns on after a few tries, most time after I go in download mode and restart from there. It lags while it is on, like short freezes, I tried to install the OTA update to ICS but failed.
Before that I was stuck on the Samsung Galaxy Note logo after flashing a franco kernel via CWM (I am not sure which version but it came with the guide to root, so I thought it could not be bad)
Edit: I flashed the xxlsc 4.1.2 jelly bean offical leak via odin PC, and I still have the same problems. I takes 5-6 reboots to actually start the device and it is very laggy, almost unusable. Every second or so it freezes for short time.
Any help please? I would send it to someone to do a JTAG repair if this could help. I just dont want to waste the money, so if anyone has experienced a problem like this please help me.
Is this a brick revived phone?

Rooted Note 1 in bootloop after update

Hi everyone. I have a rooted Galaxy Note 1. I accidentally tried to update something (the phone said there was an Android update or something) and now my phone in stuck in a bootloop showing the Android logo. When I try to reset it (volume+home+power buttons) it goes to an Odin "Downloading..." screen and gets stuck on that.
I've seen some stuff about unbricking the phone using Odin to return to the original stock rom. But from what I can tell, there are different stock roms available depending on your Country Sales Code (CSC). So apparently I need to look in Kies for my CSC to know which rom to download, but Kies doesn't recognise the phone, I guess because it's bricked. I know the phone is from the UK, but I don't know what network it came from (I bought it second hand). All I know is that it is unlocked now.
I have CWM.zip, CWM-SuperSU-v0.87.zip, and franco.Kernel-r5.zip on the micro SD card from when I was rooting it ages ago. Do these have anything to do with fixing it?
Any ideas on where I go from here? Thanks for your help.
Which volume button did you press ? You need volume up + home + power to get into recovery.
You can flash any rom from any region using odin.
Same problem
Hey,
Thanks for helping me in advance...
I used the Custom ROM (( http://forum.xda-developers.com/showthread.php?t=1970626 )) Ultimate N7000 for a long time. However this build became more and more unstable the longer I used my phone.
So I decided to go back to STOCK.
So I followed this guide: http://forum.xda-developers.com/showthread.php?t=1424997
And everything went well (Odin didnt give any errors)
However after reboot... the problem began... I cant turn my phone on anymore.... It seems to be stuck in a bootloop....
How can I fix this?? please help me
Which rom did you flash? If you flashed JB, boot into recovery and wipe data. Then reboot.

Categories

Resources