Hi guys, I was upgrading my galaxy i9000 to Froyo 2.2 when suddently the phone turn off. Now it does not turn on. I tried to access to the recovery mode, but it does not work. The only way it starts is in donwloading mode. What can I do ??? ... Please help me !!....
Do you know how to use odin? If so, try flashing jh2 from samfirmware.com. Depending on the cause if your problem, you'll either recover or will be sol
Good luck
Thank you so much !!! It worked !!!!!
Related
Hi Experts,
I am from Singapore and i have a problem with my SGS and i hope someone here from XDA can help me.
I have been flashing and trying the firmwares here but then i encountered an issue, my SGS is not completely booting and after the samsung logo i will only receive vibrations from my phone.
What i did is, i went to the download mode and used this once click but i did not noticed that this is for CAPTIVATE ONLY!!!
Now my phone is stocked in AT&T logo, just looping back and forth.. i cant even go to DOWNLOAD mode and when i plug it in USB my phone turns off..
Please EXPERTS, need your help..
Thanks in advance
forum.xda-developers.com/showthread.php?t=819551
Try this, i have the same problem, just had the resistor come in today, now just waiting for the breakout board to arrive...
Hope this help.
Hi Guys,
I made a really terrible mistake. I did not set my international version Galaxy S to USB debugging mode before attempting to flash Voodoo lag fix with Odin. Now all I see when I turn on my phone is the phone-!-pc message. I can still get to download mode but no luck getting into recovery mode. Odin seems to be able to detect my phone when I set it to download mode and connect it to my PC. Is there anything I can do to save my phone?
Any help would be appreciate.
Ok. I managed to save my phone. Turns out I could still re-flash an official firmware. /Close Thread
i have just bought i9003.Good phone. but my firmware iz xxkb1. there are some problems on this.Please tell me should i first install xxkb3 and then root the phone or?and if i do something wrong on rooting process,what will happen?and i am very very noob on android.i had i8910 omnia hd before.so please write very simple and step by step how to root and install xxkb3? thanks a lot...
If you want to flash your galaxy sl read the following posts.
http://forum.xda-developers.com/showthread.php?t=987169
You can root your device with SuperOneClick, and don't worry, in this program you can't crash your Galaxy SL.
http://forum.xda-developers.com/showthread.php?t=1004647
In this post you cand find and download XXKB3 firmware.
http://forum.xda-developers.com/showthread.php?t=1004622
And finally, with Odin you can install XXKB3 but be careful, if you don't follow all the steps, you'll break your phone.
If you have a question, post it.
don't laugh please)) but what means breaking?my phone will not turn on anymore?
and what is odin?where can i find it?
Nightwish sgsl said:
don't laugh please)) but what means breaking?my phone will not turn on anymore?
Click to expand...
Click to collapse
A break phone can turn one, but the screen don't show anything and you can't do nothing. You break your phone when you do anything bad, but in the download mode (volume down + home button + power button with the phone turn off) you can recovery it. If you haven't got the download mode on activate it now, it's very important.
And i live in azerbaijan.will xxkb3 cause any problems?
Nightwish sgsl said:
And i live in azerbaijan.will xxkb3 cause any problems?
Click to expand...
Click to collapse
I don't know but you can try it, if you have got problems you can install another firmware.
Up to now my observation on xxkb3, it was very good than the xxxkb1 and i didnt face any problems with this, battery drain also less compared to kb1
thanks guys.i will try to install kb3
basically, how to turn download on? i tried to press (volume down+home+power) and the screen message is "downloading... Do not turn off Target!!!" what does this means?
That screen is the download mode, in download mode you can conect your phone to one pc and install a ROM.
Think I have bricked my Tab - HELP
Just got myself a Tab P1000. I try updating software using Odin3.
I think i have misused the wrong firmware not for P1000 (stupid), when Odin3 is running gonna finish, it showed FAIL! So i disconnected my GT although the download mode still running.....(stupid again) n I manually off my GT by continuing pressing power button wished to reflash by proper firmware.
As i reconnected it to pc again, although i tried to turned it into download mode again from off mode and i failed, Odin still can detect it. As i tried to use proper firmware to flash it, when it gonna finished, it showed FAIL again!
Now the tab screen turned off and it won't turn on. I tried to turn it into download mode or recovery mode but it couldn't be. I think my wrongly flash has made the buttons all mess up their function. All I have is the LED light on permentanly. If I hold the power button for 10 secs, the LED goes off for 3 secs and then comes on again.
Can anyone help me sort this? Any suggestion pls? Urgent!
Thanks a lot!
What firmware did you flash? I only ask because I know I once flashed an I9000 bootloader on my Captivate and it changed my download & recovery combo to I9000's however they still worked once I used the proper combo (I know extremely lucky)
If bootloaders have been wiped and replaced with wrong bootloaders then its back to samsung with your tab for (hopefully) warranty repair...
Send back to samsung is my last choice, beside this there is no more solution??
my tab it was in same condition, check this forum and you will find solution. i give you what it works for me.....http://forum.xda-developers.com/showthread.php?t=1081800
good luck!!!
Dude!! It is worked!!!!
OMG DUDE IT IS REALLY WORKED!!!
Once i really think my GT have to send back to samsung...... but i have the last try of your suggestion, IT IS WORKED!!!
IT IS SO AMAZING N UNBELIEVABLE!!!
Thanks alot dude!!! You save my SGT!!! n my pocket!!! Thanks~
This solution is really useful n amazing!!
Any1 has same situation can try this!
Thanks again dude~!
Hello guys,
I'm new here, I just need your help, my galaxy s i9000 won't turn on anymore after i flashed it with its stock firmware.
i'd follow some of the post from this forum on how to flash a stock firmware.actually i successfully did it once. i even change the rom into jellybean
but i can't access my storage. so i decided to flash with its stock firmware again. But then i in counter a problem, it always keep on loading repeatedly. until i end into bricked. and totally my phone won't power on.
is there any idea? on how to power back on my phone?
please i need help. :crying::crying:
Have you tried charging it then trying to power on
Sent from my GT-I9000 using XDA Premium HD app
Your phone is finnished
jazzbertwise said:
Hello guys,
I'm new here, I just need your help, my galaxy s i9000 won't turn on anymore after i flashed it with its stock firmware.
i'd follow some of the post from this forum on how to flash a stock firmware.actually i successfully did it once. i even change the rom into jellybean
but i can't access my storage. so i decided to flash with its stock firmware again. But then i in counter a problem, it always keep on loading repeatedly. until i end into bricked. and totally my phone won't power on.
is there any idea? on how to power back on my phone?
please i need help. :crying::crying:
Click to expand...
Click to collapse
Cant find any good news after googeling alot
Does it go into Download mode?
or TRY THIS Bit extreme but may help you