[Q] 2.2.1 upgrade UK o2 ?? - Galaxy S I9000 Q&A, Help & Troubleshooting

sorry but looked through quite a few pages about the 2.2.1 upgrade and is it avaiable on UK 02 or do I have to do something special ??
I am new to the Glaxaxy S and have tried the search so appoligies if the answer is lurking somewhere.
I have plugged my phone in to Kies checked for a firmware upgrade and get the following Current version: PDA:JP6/Phone JP3/CSC: JP3
The latest version is already installed on connected device.
Thanks for looking

Currently it is only rolled out to Product code XEU and CPW if your product is either of those then kies will inform you have an upgrade. The Upgrade is JPY, if your product is not either of those then you will need to use Nodial Registry patcher for Kies to spoof XEU.

Related

[Q] Keis won't upgrade to Froyo from JM2/JM1/JM2

Hi,
Quick question:
I started Keis and it said an update was available. The next screen stated :
Code:
List of Devices Requiring Fireware Upgrade
Model Name: GT-I9000
Current Version: PDA:JM2 / PHONE:JM1 / CSC:JM2
The latest version is already installed on connected device.
The is running Eclair (this is what is says in Settings -> About Phone).
I am in the Netherlands. Phone was bought SIM free. Does anyone know how to get out of this?
Regards.
I telephoned Samsung, and was told that the 2.2 update had not yet been rolled out to the whole of the E.U. He said ti was not even available in Belgium, and though that since it was released north to south, then Portugal may well have to wait. I'll try back in a months time.
so do you already have it? i have jm2 jm1 jm1 netherlands wich telephone number did you dial
Bump
Any news on Froyo for JM1/JM2 ?

[Q] upgrading from jpo to ? (Need help here)

well i have xxjpo for my Samsung galaxy s i9000 unlocked no carrier bloodware non rooted still have the original launcher and since the leak of 2.2.1 there has been loads of xx??? files so confused i also want to wait for official release do any of you know what the official firmware will be called as well ?
Are you in thee UK or Ghana? If in the UK then your phone should be XEU as it is unbranded. Open Kies make sure it is updated to version 102 (Kies that is) then connect the phone and check for firmware update. You should be offered JPY. Back up all your Data before updating just in case it is deleted.
i live in london but i am on holiday with my family in ghana i am using a different chip while i am here firmware 2.2 baseband i9000xxjpp kernel version 2.6.32.9 [email protected] #1 build number FROYO.XXJPO when i get back to london i will switch back to t-mobile i have also trouble with kies i will also factory reset after update

[Q] Im new, why I cant update my samsung Galaxy s to 2.2

Hi all.
Could anyone tell me why I cant update my samsung Galaxy s to 2.2,
its on o2 but the phone was on orange if thats any help.
Iv downloaded kies and it says there are no updates for my phone so can you help me?
Ive updated my girlfriends phone and she has got the same phone me
She can update it again now.
Allso we cant send mms:mad
Pete.
Hey there
Responding to you're message.
Im having this same problem with my girlfriends phone.
Everytime I try to update her phone it says that it cannot upgrade her phone.
I updated mine to 2.2.1 now. Her phone is still on 2.1-update.
Her buildnummer is I9000XXJF5.
Either she does not recieve my MMS.
Very strange.
P.s. Im from holland, and the phone arrived in Germany Language.
Please, need some help.
Your apn settings will be different on o2 if the phone is from orange which is why probably both internet and mms doesnt work.
Don't know why kies isn't playing ball, make sure u have the latest version.
I'd suggest changing to a stock firmware from samsung. E.g. The latest jpy firmware.
First thing is to check the 3 bitton combo works, if it doesn't then there is a really simple windows based fix for this on this forum that doesn't require any programming or command line stuff.
Next, visit samfirmware, sign up free, download odin and firmware. Follow instructions to a T. Install jpo firmware first as it's v2.2 then you can go for jpy as the v2.2.1 is really a vast speed increase.
Sent from my GT-I9000 using XDA App
Thanks for getting back,
Ive done all the setting with o2 and still dont work.
I did the three button combo and reset my phone and put all the setting back in still no good.
Ive done all this visit samfirmware, sign up free, download odin and firmware. Follow instructions to a T. Install jpo firmware first as it's v2.2 then you can go for jpy as the v2.2.1 is really a vast speed increase but it would not download.
My phone numbers Pda jf3 Phone jf3 and Csc je5 if this helps
Cheers Pete.
If your phone is O2 UK you get update to )2 firmware .
If its an Orange product code phone you need to check Orange has updated the firmware .
jje
you could always do what i did with my o2 uk phone that wouldn't upgrade to latest version...im guessing that you may still be on JM1 software? [thats what mine was].
all i did was download the Kies registory patcher and use it to tell kies that i was on XEU firmware. next time i connected to kies it told me there was an upgrade available to JPY [2.2.1].
hope this helps, Matt
Settings for O2 UK Kies Reg Patcher
SoftwareRevision
was
I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1
ProductCode
Was
GT-I9000HKDO2U
HIDSWVER
Was
"I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1"
DEVCONINFO
Was
" MN(GT-I9000);VER(I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1);HIDVER(I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1);PRD(GT-I9000HKDO2U);SN();IMEI(***********);PN(*********** );CON(AT,
Updated O2 firmware and using Kies Reg Patch take the chance to save the downloaded rom .
jje

[Q] Back to Stock using Kies

Hi I need some help, and I am sure this has been answered a number of times before but I am having trouble understanding the answers.
In the past I have installed the following Firmware using Odin 1.7.
PDA - I9000XXJPU
Phone - I9000XXJPU
CSC - I9000OXAJPU
Build 2010 12
PIT - from 12/08/2010
And this work just fine on the phone.
I would like to install an older version of the ROM so Kies will update it to the latest that Kies has to offer.
I know this is not the done thing, but this is what i would like to do.
So today I installed a couple of different ROMS but every time Kies tells me I can not upgrade the version I have installed.
I am sure it is me doing something wrong, but I am getting a little confused.
So any help would be great.
Kies path to upgrade is simple .
Checks Product Code Firmware details etc if Product Code Firmware details etc match up to original phone providers details it upgrades if not it fails .
So on your phone Kies cannot match the firmware you installed with the details as its not the firmware supplied by the provider .
Your path to official upgrade is either reinstall your original saved rom .
Or flash back to stock Eclair and use the Kies Registry Patcher from Themes section to spoof an official upgrade .
jje
JJ,
Thanks for your reply, I must be using the wrong rom's, my Galaxy is a none branded one.
Do you know which ROM I would need to install, I don't have my original backed up.
Is it still possible to spoof Kies, I understand this route has been broken.
All the best.Peter
Branding is not the same as product code .
The original supplier of the phone has a product code for their individual firmware branded or not . Thats the product code for upgrade path .
If you want the latest 2.2 Froyo Kies will only offer that when it gets the correct product code
Example of O2 UK product code
oftwareRevision
was
I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1
ProductCode
Was
GT-I9000HKDO2U
HIDSWVER
Was
"I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1"
That tells Kies to upgrade as numbers match .
I would suggest you use rom kitchin and build your own rom to flash if you are unable to use the Kies registry patcher to spoof the product codes .
http://forum.xda-developers.com/showthread.php?t=817703
Or use Odin to flash latest base rom .
jje
JJ,
Thanks for this information, it is all starting to make more sense now, my phone is supplied by Carphone Warehouse, so I just need to figure out what the original product code is. Then get all of the relevant components together.
Other than the relevant PIT, Modem, Code and CSC files, do I need anything else.
I have reverted by phone back to XXJPU as this works very well for me.
Peter
Rom kitchin has the CPW csc files i would build a rom .
Use JPY and if that works you can try a later one .
jje

[Q] Need some clarification on KIES is looking for

Lots of us are trying to get our phones back to Stock Firmware so KIES can update to 2.2.1 & at some point 2.3. In my case i9000T Latin America (TTT) model which seems to be very popular on the various US sites selling unlocked i9000 phones (New Egg & Expansys-us)
Many of us have used Euro 2.2 or 2.2.1 Firmware without issue using ODIN 1.3.
What happened in the process of applying the Euro firmware that keeps KIES from updating once you've rolled back to a stock firmware. In my case i9000TUBJH1 which is android 2.1 (ECLAIR.UBJI1) .
I've tried everything from changing the Product Code from KOR, TTT, PCW and any other one that might trigger KIES (1.5 or 2.0) in allowing the update.
I have 2 of these phones. One is untouched stock firmware. It was i9000TUBJG7 and after KIES update it's now (i9000TUBJP9 with a TTT Product Code). again, just trying to get my other phone back to stock and then update to 2.2.1 so both phones are the same.
Which file is KIES looking at to allow the update? CSC?
I'm not sure why the i9000T firmware is not readily available on samfirmware.
Thanks - many of us are just trying to learn the basics and spent hours reading these forums.
Try reading the last few pages of this thread. http://forum.xda-developers.com/showthread.php?t=959806
why bother with kies anyway i have a 19000t.. just use odin and flash the stock rom form samsungfimrwares.com or a custom one like docs etc..
i am currently on jpy with jl2 modem.
also once you have clockwork on you can also flash one of docs roms via that.
or is it that you are trying to get a stock rom via kies. that is not on samsungfirmwares.com ?
if that is the case i think the reason may be that these stock firmwares were never release via kies?
I bricked my initial handset using KIES as it crashed during the update. Won't be using it again to flash my phone.
Sent from my GT-I9000 using XDA App
Samfirmware & i9000T
No sign of any i9000T (TTT) Latin America firmware on Samfirmware.com. The latest update via KIES for this phone was about 10 days ago. Version i9000TUBJP9 which installs 2.2.1.
Again, just trying to get back to stock. I'll be passing this phone to another user at some point and they'll need KIES to keep it simple.
Any help in understanding what keeps KIES from updating after you've installed stock 2.1 firmware would be great.
I'll keep reading ...
thanks
Kies reads the codes from the phone .
Firmware 2.2 Product Code Vodaphone Hardware ID Vodaphone .
Looks for update for the product code if all matches downloads .
Product Code stock Hardware ID stock matches nothing on its Database = no update .
Route back i have used is flash Eclair spoof product code via Kies registry patcher . Upgrade and save rom at the same time to enable reflash to product codes firmware .
jje
Did you manage to get the update from Kies? You would do a great service if you can share the firmware.
Kies looks at the product code. I replied to your other post.

Categories

Resources