Now just had a little problem. I updated to Darky's 8.1 no wipe version. It updated fine but the first time it booted, it froze. Now it keeps doing a boot cycle over and over again. I see the i9000m screen but I do not get to the S logo screen or in this case the transformer screen because it reboots. Can you help me plz? Thanks.
Zink6 said:
Now just had a little problem. I updated to Darky's 8.1 no wipe version. It updated fine but the first time it booted, it froze. Now it keeps doing a boot cycle over and over again. I see the i9000m screen but I do not get to the S logo screen or in this case the transformer screen because it reboots. Can you help me plz? Thanks.
Click to expand...
Click to collapse
try a re flash of another ROM preferably a stock ROM then start all over again, similar thing happened to me earlier, i am quite new to all this but i dont know if its the kernel or lagfix i had what caused this...
i re flashed back to froyo and then installed darkys ROM then re installed my kernel last.. all is good (for now)
worked for me first time but when i went to sgs tools to upgrade your apps ie gallery, camera, it said no busybox installed but went ahead and done fine in v8.0 and i see that cwm changed from red to green too went to market for busybox to download it but when it goes to install phone just reboots all the time mmmm...
Easiest way out of cycling boot:
pull battery
place it in
bring phone in download mode (not recovery!)
prepare Odin with a stock ROM
connect the phone to your PC and give it a kick thru Odin
When done feel free to switch again to Darkys (8.0) with wipe (you will loose data) and afterwards upgrade to 8.1.
stepsch said:
Easiest way out of cycling boot:
pull battery
place it in
bring phone in download mode (not recovery!)
prepare Odin with a stock ROM
connect the phone to your PC and give it a kick thru Odin
When done feel free to switch again to Darkys (8.0) with wipe (you will loose data) and afterwards upgrade to 8.1.
Click to expand...
Click to collapse
YES !!! i agree, it is a pain.. but we love our phones and we would do anything for them its always best to flash back to standard FW if you ever get a problem...
I myself experienced this. Whenever I installed a new software, it would just boot. I got fed up because darky's forums are also down and there is no discussion. flashed doc's rom. Now everything is fine.
...mh... but it's not caused by Darkys ROM. This cycling boot feature may appear at all ROM, at all lag fix actions and so on. It depends how proper you interact with phone- and ROM-features while configuring. A lil disturbance during your session (by you or battery issue or whatelse) or a not so well prepared basic from where you start and your unlimited-feature-wishlist-and-paint-it-golden-one-click-action is enough to interrupt the whole thing and run into trouble.
It was and is all the same - since DOS or C64. And it will be the same, even when iPhone is on level 12.x or Android will be able to beam you elsewhere thru the barcode scanner.
It's a game. Nothing more. And game means lot of fun - and in the beginning a certain thrill when your phone stuck first time and you are thinking: "... f*ck... bricked..."
yup same for me
cycle boot thing
didnt enable download mode before that....
can get into debug screen thou but wiping it doesnt help
anyone with a suggestion on what i can try? warrenty = off so im screwed otherwise
anyone with a suggestion on what i can try? warrenty = off so im screwed otherwise
Just tell the warranty guy darky screwed it .
OR
http://forum.xda-developers.com/showthread.php?t=853950
jje
cant even boot the phone mate
so ehm i dont get it....how can odin help me ?
is there any way of getting it into download mode still when it doesnt boot up? i heard about that JIG thing they made themself...isnt that just like the microusb cable that comes with it to the pc? i dont get it sorry if im trippin but im maddd at myself for even trying this lockscreen thing
http://forum.xda-developers.com/showthread.php?t=819551
jje
Thanks guys for all the replies. Now I did try flashing a stock rom but with no results. Was still having the same thing happening to me. If you guys can give me the link to the files you used to solve this problem, that would be great. Also just for your information I have a Bell i9000m unlocked running on fido. And NO its not an sd card failure lol.
As for DarelSteilz85, I did make one of those JIG usb for myself. It easy, just get the micro usb and strip it bare to the point you can see the pins on the usb which usually are connected to the wires and get a resister to connect one pin to another. Now for which pins, I remember it was 4 and 5 that you had to connect through the resistor but double check as I am not sure. Also the resistor has to be a certain level which I forgot so double check that also. Good luck.
http://forum.xda-developers.com/showthread.php?t=853950
What i use for problems .
jje
Hi, I just rooted my phone and installed Darky's ROM etc. Everything went perfectly but I just did a factory reset on my phone through the settings > privacy menu. Then i turned my phone off, now it's stuck on the boot screen (the one that says:
Galaxy S
GT-I9000
Samsung
)
Anyone know what I can do to resolve this?
PS, I've tried booting into recovery and download mode,- only download mode works
Flash ressurrection with Odin, or just try reflash a kernel.
Post in right section next time !
And don't say "dead" "brick" if you have download mode, nothing is more "noob" !
Sent from my GT-I9000 using XDA App
Flash another ROM in Odin with re-partition. You need CSC, Modem, and ROM. The next time, factory reset/wipe, clear cache, and clear Dalvik cache before flashing to a custom ROM, not after.
Also, this is the wrong section for this.
If download mode still works, its unlikely that its ' dead'.
Probably just a corrupted filesystem or some missing file that it needs.
If youve tried everything else, the thing left to do is flash a complete firmware via either Odin or Heimdall, in download mode. That should give you a working phone again.
First, wrong section... post in the right section next tome.
Get darky resurection edition and flash with odin, then reflash darky nornal rom from cwm
Sent from my GT-I9000
WiwiPouPou said:
Flash ressurrection with Odin.
Post in right section next time !
And don't say "dead" "brick" if you have download mode, nothing is more "noob" !
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Apologies for being a noob, couple of questions though:
never mind
EDIT: Thanks for your responses, and don't answer the above question
thanks for your help everyone
Which is the correct section for this type of thread though?
And Mods- please move this thread to correct location, cheers!
WRAITH07 said:
Apologies for being a noob, couple of questions though:
never mind
EDIT: Thanks for your responses, and don't answer the above question
thanks for your help everyone
Which is the correct section for this type of thread though?
And Mods- please move this thread to correct location, cheers!
Click to expand...
Click to collapse
follow this guide for flashing stock rom --> http://darky.ficeto.com/community/i...-stock-rom-over-darkys-rom-gt-i9000-only.486/
AND: if you can access DL mode then Recov Mode is working too. You are just doing something wrong then ... for Recov Mode you need to release all buttons when Galaxy S logo appears.
WRAITH07 said:
Apologies for being a noob, couple of questions though:
never mind
EDIT: Thanks for your responses, and don't answer the above question
thanks for your help everyone
Which is the correct section for this type of thread though?
And Mods- please move this thread to correct location, cheers!
Click to expand...
Click to collapse
For questions maybe the questions and answers section
Anyway, with download mode our phone is pretty much unbrick/killable unless you flash another bootloader which is a) rare and b) not really a threat either
I think my phone is dead.... can anyone help me verify that? I've been reading all over and tried all ways to get a response, but there's none.
I pulled the battery and let it sit for several hours before inserting. - No response.
Put in my spare batte, have it plugged to charger. Also no response.
Plug to PC, PC doesn't even see the phone.
Cannot go into recover, download or boot or show any signs of life.
It was charging fine one moment (last saw about 80%) then about 10 min later, went to unplug to use.... but found the phone dead and rather warm. (not sure if that is usual since the batt was being charged)
Anyway, I flashed my phone only 1 week ago using "Insane" kernel and doing Overclock to 1200 with about -75 undervolt across the frequencies. Did I kill the phone by doing this ???
What are my chancs of getting warranty on it if the service centre manages to find out it had been flashed??
What are my options now? Any other areas to chek and try to recover?
Thanks
Well, if you can't get into download mode, there is still one more step to try before giving up. Go to ebay and search for I9000 usb jig. That might be able to force your phone into download mode. (They are cheap. Very cheap.)
If that doesn't work, there's nothing else you can do but to bring it back to a service centre.
Check out the info for the rig you mentioned. Apparently, it doesn't wotk for phones that are totally dead. i.e. no signs of life at when buttons are pressed, no lights etc.
I brought the set down the to service centre and luckily, the lady there did not ask me anything much. She just swapped out the batt to verify, plugged into USB charger to verify... then started to fill in the form for the phone to be sent in for repairs. Though she's not the repair person.... she did mentioned that all data would be lost and most likely a new board would be put in.
I'm keeping my fingers crossed that'll be the case... just gimme a new PCBA w/o trying to repair the current one. Hope they don't have any diagnostic tool/fixture where they can boot from a "debug" chip (such as processor, etc) to do board level repair.... then it might just show up that I'm running a modified kernel & ROM.
They cant check, if you were runnig custom ROM. Stop worrying, mostly they do not have a choice but to replace PCB. This is my personal exp. with samsung.
Sent from my GT-I5700 using Tapatalk
Hey there, i am feeling somewhat overwhelmed with all of the advice going on out there and need someone who can give me the answer to my specific problem hardware wise without breaking a sweat...
I flashed a froyo 2.2 rom onto my phone a while ago, recently all of my apps stopped working, and i could no longer install any apps.
Couple days ago i tried openning gmail and the screen went black and gave me the bzzzzzz...............................bzzz...bzzz...
vibrating error that you usually get when an app crashes.
Now the phone continues doing that even when booted up and stuff
It starts right after the S screen and repeats until the battery is removed.
My phone can't get into download or reset mode using the 3 button method so i bought a jig off of ebay, works like a charm.
however NOW, i cannot get the computer to see the phone; both when it is on and attached and in download mode and attached. Odin can't see it, neither can Kies.
If i can get either to see it, i can look up the flashing process to make sure everything is right.... but as of yet nothing i am doing is making a difference.
Thanks for any help
Ok, I'd focus on odin so disable Kies (in task manager processes - all the kies processes).
Then I would 1) reinstall the drivers (standalone ones) 2) Have a few versions of odin to try (like 1.3, 1.7 and ez odin) 3) Clean your usb port on the phone (and computer maybe too - whats the harm?).
Usually if you are sure the drivers are Ok then you should be able to odin working with a nice clean port. They are more sensitive to dirt/moisture or whatever than they should be.
Try that and let us know...
BTW Some people think that the order is important but I've never noticed that. I always have odin open and then connect it but cant hurt to try the other way around too.
Hey thanks alot,
I am at work right now but i am optimistic about trying that out lol.
Just so i know for when the time comes and if Odin works, what files do i need to flash it? .pit, .tar and anything else specific for Bell Canada?
I only ask because you are with Bell so it is probably a very simple answer for you. Otherwise I am sure i can find it elsewhere.
Thanks,
I'll keep you updated
Josh
Download the complete jl2 rom from link I posted yesterday (search my posts) with repartition ticked, then flash the kc1 rom from stock rom link on xda or at samfirmware.com and flash without repartition if you want the latest. You could just try the kc1 step but I you need to repartition.
Sent from my GT-I9000M using XDA Premium App
Hey man,
my phone has never been sent in for repairs or replaced...
I was reading one of your other posts and you advised another member to send it in and maybe they will replace/update hardware?
I have still had my phone for less than a year so sending it in will be no problem at all...
Should i flash to the latest myself or return to stock and send it in?
I really appreciate your help.
Thanks
Well he knows his is broken as he can see that his internal memory reads 0 (which means its cooked - ask me how I know...) and he was trying to fix it in a round about way. Or there was the guy who flashed a captivate rom - that was just a big no-no.
You might just have a corrupt partition or some other corruption in the file system. I seem to get that all the time and its a pain but very fixable .
Alright, sooo
-uninstall Kies
-install drivers only
-try to connect to Odin
-If succesful flash with Odin
-dance with joy
Got it, I will update you later when i get home.
Thanks
installed drivers on my work computer (32 bit windows xp) and nothing... I've tried phone off, phone on, phone in d/l mode... It doesn't pick up anything...
I can try it on my Windows 7 comp at home and see if that works but i'm wondering what the worst case scenario is just bringing into Bell and having them fix it... Am i looking at charges, warranty voiding, etc.. etc... to have it fixed or could i BS my way out of it?
Fuuuuuuuuuuuuuuuuuu
pretty sure i flashed the wrong firmware on my phone, when it boots up it says GT-I9000 not GT-I9000M.
It worked fine for like 6 months so i never questioned it... damn damn damn
Not to be completely devious but i got an extended warranty that replaces the phone due to water damage, theft, etc. etc...
If there is no other way should i take advantage of that?
I would hate to jump to one of those actions but i am somewhat panicking becuase i made a super-noob mistake and effed up my phone....
I9000 firmware is completely compatible. The text you see is from the kernel which are always for i9000 unless you have one of the three bell firmwares. So that's not the issue.
Sent from my GT-I9000M using XDA Premium App
RogueCow27 said:
Not to be completely devious but i got an extended warranty that replaces the phone due to water damage, theft, etc. etc...
If there is no other way should i take advantage of that?
I would hate to jump to one of those actions but i am somewhat panicking becuase i made a super-noob mistake and effed up my phone....
Click to expand...
Click to collapse
I would keep trying. I have gotten warranty before and I was in the same predicament as you almost except I knew that the internal memory was dead. But that was also around the time when most of the I9000M models were dying. They might be checking more now.
If you get odin to flash a stock rom then you can go for it but by then you should be able to fix it.
Sent from my GT-I9000M using XDA Premium App
Alright i will keep trying.
As far as the firmware goes, my gf and i both have the same phone, but she kept heres official and i put custom roms on mine (just the 2.2 because it wasn't available)
We are both on bell canada so i asked her to boot up her phone and the beginning message on hers says GT-I9000M so it freaked me out lol
I will try on my home computer,
keep your fingers crossed for me
Alright, so Odin can now see my phone (it was the damn cord, my Win 7 comp couldnt see it but my xp work laptop can)
Which firmware would you recomend flashing? Stock gingerbread or a slight variation?
I am at work right now so i can wait a bit for a good response. It'd really help me out if you could provide links and tips to the best firmware out right now (i have no problem flashing a custom ROM if it is good).
Thanks alot,
Josh
Succesfully Flashes Gingerbread 2.3.4
Thanks for all your help!!!
how did you manage to see it in odin?
i have te same problem with restarting just after first screen (after flashing to gingerbread) but i cant see it in odin so i cant flash it again?
when i connect it when turned off, a small icon appears with usb connected sound but its still not visible.
Is it maybe my win7?
help, anyone please
Did you start in Download mod? Did you kill the Kies processes in you Win7 task manager ?
If yes, sometimes Windows takes time to install the drivers (be sure ton be connected to the internet), you should also close and relaunch Odin.
i launched download mode with sdk, and now i cant start it.
i went to another pc with xp. it installs drivers but odin cant recognize it.
Well i did it on my work XP computer becuase WIN 7 wasn't recognizing it. But it turns out the whole time the cable i was using would connect to charge, but not act as a pc connection.
I superonelick rooted. Then i downloaded ROM Manager and flashed CWM. Then i returned to stock using ODIN 1 click. It failed.
Now when i turn phone on it just shows a white screen and nothing else happens... i can't find problem anywhere else on google. I've rooted many captivates but never had this problem! UH-OH... Help please
the same thing happens whenever i try to boot into recovery and into download mode...
You are gonna need a JIG. Check mobiletechvideos.com to get one or u could make one urself.--see this for homemade jig... [HOWTO] *Layman's iGo Jig* [Solderless]
Which One Click Odin did u use ??
i used I897UCKH3_withBL
i used it the night before and did the exact same procedure with no fault... i didn't do anything differently...
If u can't get into download mode by pulling battery/ replacing battery and connecting the micro usb to the phone, having already connected the usb end to the computer... then u r gonna need a jig.
And a friendly fyi, once u flash Gingerbread firmware that contains the Bootloaders, there is no need to flash a firmware that contains GB Bootloaders again if u are flashing another or the same Gingerbread firmware... or even going back to Froyo or Eclair for that matter, because the GB Bootloaders are backwards compatible.
i pull the battery. press both volume buttons, plug in usb chord to phone (already plugged into computer) then put in battery. The phone screen turns on (all white, blank screen)
I've seriously done this with 5 captivates... i've never had ANY issue... and now this happens. I'm so confused.
Do u remember or can u still see on the Odin where it failed ?
Either way though, u r gonna need a jig.
But on the plus side, it is not hard bricked.
Yeah i just did it out of order... ugh...
well this sucks, cuz it's someone elses phone and it's 9pm on a sunday night... I don't know what to tell him, lol.
Once u get or make a jig, then just flash the KH3 that contains NO Bootloaders 1st, that is, if that is still the base u want to take the phone to. This should get the phone working, if the Odin failed after it had already installed the GB Bootloaders.
good grief... i still can't believe this has happened... I guess i'll just give him my phone to use... i'm never helping anyone else again with their phone. I don't want to be responsible for this crap.
Can i just take his phone to AT&T store and get a new one (it is only 2 months old)
i mean are there any other ways to try and get the phone to do SOMETHING? I mean it turns on....
Jig is ur answer.
If it turns on still its fixable if you tried download mode and the screen is all white does odin still see the phone??
Sent from my I897 using XDA App
odin does not see the phone.
As others have mentioned jig is your only option at this point, but easily fixed none the less
Sent from my I897 using XDA App
okay well i just bought one. I'm really short on time to make one this week. So it'll be here tomorrow or wednesday.
what are the actual instructions once the jig comes in? I just plug it in and it goes into download mode? Then hook it up to computer and ODIN. (which odin do you recommend for cognition, or do you recommend another OS? )
Search, man, search.there are dozens of threads that answer this, and all the questions you've had.
You may also want to try one of the heimdall one-clicks, especially if ODIN isn't working for you.
i appreciate that. I just wanted the opinions of forum members that i respect. (i know there are a lot out there who are worthy of it as well.) So i figured while i had one's attention, i would ask
There is nothing wrong with asking questions, but you can learn more by searching for one answer than asking 10 questions.
Ok Guys, I started this thread because last weekend I had an interesting issue with my O2X. From one day to another, whenever I connected my phone to the computer it only charged, I had no USB connection. I’m not yet quite sure why it happened, the last thing I did to my phone was install CM10 nightly of 31 October 2012, and then I changed the default baseband I had (725) to the one GetRil was telling me to install (LGP990AT-00-V20l-EUR-XX-OCT-20-2011 0_CP) (this baseband didn’t fixed the strange noises of in call) two days after that I got the no USB bug, at first I thought it was software related, then after lots of reading and trying different cables and computers I thought it was hardware related, but then I saw an interesting chance of fixing it, and it did in my case
Credit goes to Kohos, I manage to have USB fixed temporary thanks to his post on modaco.com
I’M NOT TELLING THAT CM10 CAUSE THIS BUG, IT JUST HAPPENED TO ME WHILE USING THIS ROM
Specs
Phone: Optimus 2x (p990H made in south Korea)
Rom: CM10 Oct 31 2012 (when got the bug) now CM7 nightly 15 July 2012
Kernel: Symbiosis 2.6.32.59 v1.2
Carrier: Telcel
Country: México
Ril: 0725 (V10d, Europe)
BB: 1035.21_20110725
CWM: 5.0.2.0 (no touch version)
To solve this issue you need to have a stock ROM that can be flashed by CWM. Can be the rom, or a backup of the stock rom (If you don’t have one send me a PM), I didn’t tried stock-based ROM so those may or may not work; I’m not sure but rather use an original stock ROM. You also need to be able to enter CWM recovery, and have LGE drivers up to date.
For this method I used a stock nandroid backup.
I’ll describe step by step all I did to solve this issue so you can give it a shot:
1. If you have a flashable stock rom you may skip this step and go to step 3, if what you have is a nand backup you need to make your partitions back from EXT4 to EXT3 (this is the format that stock rom uses) so need to download the tool R2 found on the first post here:
http://forum.xda-developers.com/showthread.php?t=1021549
put it on your external SD card along with the backup of the stock rom
2. Reboot to enter CWM recovery and install the tool R2 (NOTE: this will erase all information of the internal memory)
3. Install or flash your stock rom or backup (In case you're using my backup, keep in mind, my file IS NOT a flashable rom, it is a backup, so trying to use the option "flash zip from external sd card" WON'T work, what you need to do is unzip the file and put it on sdcard/clockworkmod/bakcup, then on the recovery, you have to use the option "restore from external sd card", that way it should work, keep in mind that if you change the name of the file it will give md5 error for the name won't match the backup's md5)
4. Reboot and start the phone, once it is all loaded, on the phone app dial: 1809#*990# this will take you to the service (hidden) menu (If it doesn’t take you automatically to the service menu (without clicking dial) you’ll need another ROM or backup)
5. In this menu you’ll need to scroll to the option: Module Test > USB Mode Selection, in there make sure the option LG Android USB is selected
6. Then go back to the root of the hidden menu, and go to Port settings, there you’ll see several options, the ones we’re interested in are: AP USB, CP USB, AP UART, CP UART, the default should be AP USB, you can start playing with those options. (While doing this, you might want to play with your computer device manager scanning for hardware changes, that might help detecting the USB)
The recommendation is to select CP UART, wait, if your problem is not hardware related, it should popup a message of new unknown device, or LGE Platfrom Android USB device. If your USB show some life signal, then you’re almost done, if not, keep playing with the four options until you see some life signal.
What I did was select CP UART, click Ok, wait, AP UART, click OK, wait, CP USB, click OK, wait, AP USB, click OK, I waited here about 1 min, and then on the computer device manager I scanned for hardware changes, and suddenly my computer started installing all drivers again, this last option is the one that must keep selected even with reboot of the phone.
7. Once you get all done, reboot the phone and connect it to USB to see if it is recognized again, if not, repeat steps 4 to 6
8. Ok, If everything went fine, you should now have USB connection, now I would recommend you flash your Stock Rom, so everything that might cause this bug gets fixed (if you don’t do this, you might get the bug back eventually). To do so you might need to turn off your phone and plug it to your computer while clicking PWR and VOl- at the same time, if your computer doesn’t recognize your phone, use the device manager and scan for hardware changes, this should reinstall the driver needed to make this happen.
9. Finally I restored my last nandroid backup through cwm
I did this on Monday, and two days later I had no USB connection again, I repeated this steps and I had USB detection once more, today it happended again, and repeated the steps so I’m pretty sure this fix should work every time.
NOTE: This is a temporary fix, I've been trying to identify why the bug keeps comming back
Hope this help you all get over this serious bug :laugh:
Updates
This is my last froyo teclel stock backup
http://www.4shared.com/zip/AEVLSE34/2007-02-01000516.html
http://dl.dropbox.com/u/7867872/2007-02-01.00.05.16.zip
Disclaimer: Even though I'm sure it will work, try it at you own risk, I'm not responsable for any bad behavior or damage that could happen to your phone
UPDATE:
Ok, guys I told you I would make some test to make sure the bug won't come back or identify the problem, what I've found so far is that the problem might be caused by the wall charger (but might not the the only reason), If I'm not wrong, the LG stock charger has output of 5.2V - 650mA DC and I've been using a motorola charger (5.1V - 850mA DC output).
Four days ago I started charging my phone only with my computer (usb port has output of 5V - 500mA) and I've had no trouble at all, the bug hadn't come back, today I charged my phone with the wall charger and the bug immediately came back, so for now that's my theory, the wall charger, stock or not, might fail and deliver more current that the O2X need so it mess the phone, I'm going to make fix on my charger to prove my theory, (I have no money for a new charger xD, but I'm studying electronics) if it fix it, I'll let you know, but you can try and charge your O2X with your computer for a day or two to help me prove my theory or prove me wrong
UPDATE:
It's been some time since I last posted here, I've been busy with my finals, but have had some time to make some tests to my phone. On my last update I told you that I had a theory about the bug, well, so far I can tell you that the wall charger indeed have something to do with the bug, but its not the cause of it, I've been using my wall charger letting my phone connected all-night long and the bug seems to happen again, but letting my phone connected to the PC for a while allows the USB sync and debugging again, so I'm not sure why it happens, I'm about to finish my finals so I'll try to make some tests once I'm done, hope this giude help you
UPDATE:
Well, as I was testing my theory, I go back to zero, this is because, my phone, doesn't have the bug anymore, so I have no chance to keep testing solutions for it, the conclusion I got with this is that the wall charger doesn't create the bug, maybe it triggers it, but not always nor on every device because, I haven't sopped using the same wall charger and the bug haven't returned, the last thing I did was, use my computer to charge my phone for three days, always letting it charge to 100% (unless I have to move from the computer) and the bug didn't happened, then, on a rush I had to use the wall charger, the bug appeared instantly, and then keep charging it with the same charger, two days after that, the bug dissappeared, I made no rom change, nor baseband, nor ril, nor anything, just like that it disappeared, so, I have no way to keep testing, if it ever comes back, I'll make some tests again, but for now, I have nothing to work with, hope this thread help you to get over this bug, at least, for a while, I'll be reading this thread in case you have some trouble with the instructions or so, cheers
UPDATE:
Ok, so I deleted long ago the last backup you told me was not working, and since I went to CM10 from Pengus I haven't had the no USB bug, so, one person asked me for the backup, I just made a new one, (this one is 204 MB on zip, read step 3) and uploaded it to 4Shared and Dropbox, so, remember to read and follow the instructions as they are, hope this time you can restore this backup, and one more thing, this backup was made just after installing it on the phone, so it doesn't have even a gmail account, you have to put yours and update market if you need something from there, ps. dont mind the date of the name of the file, it is innacurate, cheers
I don't have any stock ROM backup that I can flash via CWM, can I use this instead?
http://forum.xda-developers.com/showthread.php?t=1617458
To be honest I don't see a big difference to my post you probably found while searching except that your version is waaaaay more to read.
kohos said:
when dialing the above mentioned 1809#*990# in the Port menu, switching from default AP USB to AP/CP UART gave me life signs.
After switching to AP UART I linked the Unknown device driver to lgusbdiag.inf located in C:/ProgramFiles(x86)/LG United Mobile Driver.
Suddenly it started installing it and is now recognized as: LGE Platform Android USB Device.
Once disconnected I lose USB again, I'm able to recreate the first steps though even in default AP USB mode by now.
Click to expand...
Click to collapse
But that aside I hope you realize that this is not a solving fix at all. All it does is giving people who got a fresh device the chance to flash a custom recovery. That's all. It won't work with any CM ROM and even Stock based ROMs.
Unless you have an early Froyo version flashed you will also have no ADB and it won't be recognized during the NVFlash process rendering it pretty much useless.
Having seen dozens of people having this particular problem where all the super obvious stuff like other cables, other pcs, other drivers etc. did not work, sending it to repair was the only fix I heard of solving this problem to date.
Of course I'm very curious on how you are going to identify the problem. Good luck.
kohos said:
To be honest I don't see a big difference to my post you probably found while searching except that your version is waaaaay more to read.
But that aside I hope you realize that this is not a solving fix at all. All it does is giving people who got a fresh device the chance to flash a custom recovery. That's all. It won't work with any CM ROM and even Stock based ROMs.
Unless you have an early Froyo version flashed you will also have no ADB and it won't be recognized during the NVFlash process rendering it pretty much useless.
Having seen dozens of people having this particular problem where all the super obvious stuff like other cables, other pcs, other drivers etc. did not work, sending it to repair was the only fix I heard of solving this problem to date.
Of course I'm very curious on how you are going to identify the problem. Good luck.
Click to expand...
Click to collapse
I'm extremely sorry, there's one think I missed, give you credit (fixing that right away), I actually found your post on modaco.com, and tried to access to the hidden menu from CM7 with no success, fortunately, I do have an early froyo backup that can be flashed through CWM, the only thing is that is the Telcel stock rom (I don't know if this can work with other O2X devices, I think there should not be problem at all)
About ADB, it work in full with the latest drivers installed and scanning for hardware changes on the computer device manager, It even work entering the S/W update service on the phone (to install a stock rom)
I know that many people have had this issue, I spent a lot of time reading forums and stuff about it, the only post that actually helped me, was yours, so, credit is yours, I did this post to show people what I excactly did (that's why is a lot to read, but I wanted to make it as easy as possible to follow up)
To identify the problem is a long and slow task, so, I'll be making some tests and let you know what I found, right now I have no much time, 'cuz I'm about to start my final exams, so I'll be busy, but as soon as I finish I'll be more dedicated to it, I'll be making hardware and software tests but can't promise anything yet
vanmarek said:
I don't have any stock ROM backup that I can flash via CWM, can I use this instead?
http://forum.xda-developers.com/showthread.php?t=1617458
Click to expand...
Click to collapse
I tried to use that ROM, but couldn't manage to download it (I think it was removed, if you want to give it a shot try to find another flashable stock rom or backup, if not, give me some hours to clean my bakcup and upload it somewhere to let you use it, (it is mexico's telcel stock rom, but it should work)
Well Thanks ocr66 for this wonderfull news. I have the issue with usb connection from long time and i will give a try to your fix. You can post a stock rom here or a link to a rom that works??? In order to instal this fix i could lose the root??? Thank you 4 all!
vladutz9 said:
Well Thanks ocr66 for this wonderfull news. I have the issue with usb connection from long time and i will give a try to your fix. You can post a stock rom here or a link to a rom that works??? In order to instal this fix i could lose the root??? Thank you 4 all!
Click to expand...
Click to collapse
It all depends on what you install, if you manage to install stock rom through CWM or another recovery, yes you will loose root, but will have usb connection so you can root again, later today I'll upload my own froyo stock backup (it's mexican stock for telcel carrier, i think it should work out of méxico, maybe could cause network trouble on other countries, but its just a posibility, the important thing is that you be able to access the hidden menu), this backup I'll upload can be installed through cwm and its already rooted, so its like installing any custom rom, you'll keep your recovery and root
Remember, this is a temporary fix yet 'cuz I still get the bug comming back, maybe its because I am restoring my last working cwm backup, the only thing I haven't tried is clean all, install stock, root, install custom rom, and download again everything, maybe the bug is caused by something on that last cwm backup
I'll let you know as soon as I upload my bakcup
cheers
Well thank you! How i have this issue from one year i learned to live with her, but i could not live without root. So if i will instal a stock rom without root i will be unable to correct the usb connection i will get stuck with stock rom and no root. Will be the end of my phone. In am interesed to gain the usb connection for change the bb, i supose i can be something wrong with my bb 1035.21_20110725 and gingerbread. You can check to change the bb to see if you get again losing usb connection. Cheers and thank you 4 all.
got this after CM10 install
I've only had my phone for 1 day from new and already got this problem.
Rooted with superoneclick
Installed CWM v5.x
Installed CM10 Nightly Nov 13th
Now no USB mode, only charging.
baseband: v10e
RIL: CM10 1106
EDIT UPDATE: Well its working for me again now, I think in my case it was because I was using Linux and CM10.
By going to Settings/Storage then pressing menu button and selecting 'USB computer connection' I was able to change the 'Connect as' option from MTP to Mass storage and it now works.
@tiktok1 Lucky you!!!
@ocr66 Any news about this bug???
vladutz9 said:
@tiktok1 Lucky you!!!
@ocr66 Any news about this bug???
Click to expand...
Click to collapse
Actually yes, I've managed to identify what's triggering the bug at least in my phone, so might be the same for others as well, see the second post
BTW, did you tried already the fix? did you used my stock froyo backup?, if it didn't work, I can make another and upload it
Hi. Looks like I have the same problem with USB as you. Your theory about the wall charger might be correct. Here's my situation:
So, I've got my phone two days ago, bought used, came with a general Sony Ericsson USB charger. It says it outs 850mA at 5.0V (confirmed with a multimeter). The phone is on stock Android 2.2.2, isn't rooted yet. The guy from who I got the phone says that he suffered too with this kind of problem, however he got it working after 2 weeks without the use of the hidden menu. This means, that in those 2 weeks, he might have used a PC or a laptop to charge the phone. I tried the hidden menu port settings, however the only "working" mode is AP UART, but it is not recognizable by the PC, even if I try to link the LG drivers manually. Cycling through the modes did not help. I'll try to charge the phone with my PC, and see if that dose anything.
Details of the phone:
Firmware version: 2.2.2
Baseband: 1035.21_20110218
Kernel: 2.6.32.9-dirty
Build: FRG83G
LGE Version: LGEP990-V10b
Wow. All i can say is wow! Gosh! Just dunno how grateful I am stumbling upon this thread! Kudos to you sir,you just ended my 2 month long frustration about my phone not being able to communicate to my PC. was getting ready to send the phone for service then I read this. I had flashed every GB ROM imaginable from the dev thread with no luck. I am running carburano DM 1.7 now,all I did was to go to the hidden menu,switched one port setting,wait,then voila! PC recognized my phone! Again thanks,great respect to you,and Superskill.
Hi, this is my post to thebgeneral board by accident, didnt even read there was a qanda section lol
It didn't work on my gfs phone unfortunately, notvsure what was wrong.
Maybe I should try stock Rom instead of modded, how long are you guys waiting for the phone to show up?
I downloaded a stock Rom that had been modded.
So I could be sure that I would have cwm in case anything went wrong.
Rom loaded and was able to get into the secret menu.
I will say that under USB connection type there was misspelling where it said:
LG USB adnroid
Not sure if that would affect it.
I selected that item.
Then went to port.
Selected the different options in ordered and waited about 10 seconds on each turn, then pressed find any changes in device manager unplugged and plugged the USB.
Then tried in different orders but with not luck.
Took the battery out and tried holing the vol up down the plugging in USB but to no avail.
Then pressed power and vol down.
The phone tuned on and showed LG sign then switched off.
I tried pressing check any changes as the LG sign came on but nothing.
Then tried nvflash as the LG sign came on but nvflash showed no connection.
Very weird, definitely dead but still charges, doesn't make sense.
Oh well
Ordered an atrix with work and play kit for 68 quid, has a broken digitizer which will cost 20 pound, on average, off ebay.
Thanks for the help though.
May take the 2x apart when new phone comes and see if there's any physical damage on te board.
Sent from my LG-P990 using xda app-developers app
Sent from my LG-P990 using xda app-developers app
mondc1088 said:
Wow. All i can say is wow! Gosh! Just dunno how grateful I am stumbling upon this thread! Kudos to you sir,you just ended my 2 month long frustration about my phone not being able to communicate to my PC. was getting ready to send the phone for service then I read this. I had flashed every GB ROM imaginable from the dev thread with no luck. I am running carburano DM 1.7 now,all I did was to go to the hidden menu,switched one port setting,wait,then voila! PC recognized my phone! Again thanks,great respect to you,and Superskill.
Click to expand...
Click to collapse
Lucky you! I was to in DM 1.7 but when i was in hidden menu i chosing another port, don´t want to save the settings. Anyway congrats!
No luck...
I've used my PC for charging for a week now, still no USB connectivity. I think this might be a hardware issue with me as the phone sometimes says it's charging, but it's actually in my hands with no cable attached. I managed to root the stock 2.2.2 firmware with GingerBreak and installed CM7 with RomManager with a downloaded ZIP on the SD card. Thanks for the tips anyways.
Doctor0710 said:
I've used my PC for charging for a week now, still no USB connectivity. I think this might be a hardware issue with me as the phone sometimes says it's charging, but it's actually in my hands with no cable attached. I managed to root the stock 2.2.2 firmware with GingerBreak and installed CM7 with RomManager with a downloaded ZIP on the SD card. Thanks for the tips anyways.
Click to expand...
Click to collapse
Hello, I'm sorry it took me a while to answer, I've been busy with my finals, did you tired the tutorial I posted? the hidden menu modification? I know that you let your phone charging for a while with your pc, actually, it should've worked but, maybe the problem on your phone actually is something else, 'cuz I haven't had that issue that the phone says it is charging but its not connected to the charger, my brother told me that he have had that same issue but with other phone, he changed the wall charger and that "fixed" it, but I think if you haven't tried the tutorial, give it a shot, try changing to CP UART if your phone's usb is working as it should, your computer should detect a new unknown device, if not, myabe your phone is hardware damaged, hope you can fix your phone soon
cheers
monkeyass said:
Hi, this is my post to thebgeneral board by accident, didnt even read there was a qanda section lol
It didn't work on my gfs phone unfortunately, notvsure what was wrong.
Maybe I should try stock Rom instead of modded, how long are you guys waiting for the phone to show up?
I downloaded a stock Rom that had been modded.
So I could be sure that I would have cwm in case anything went wrong.
Rom loaded and was able to get into the secret menu.
I will say that under USB connection type there was misspelling where it said:
LG USB adnroid
Not sure if that would affect it.
I selected that item.
Then went to port.
Selected the different options in ordered and waited about 10 seconds on each turn, then pressed find any changes in device manager unplugged and plugged the USB.
Then tried in different orders but with not luck.
Took the battery out and tried holing the vol up down the plugging in USB but to no avail.
Then pressed power and vol down.
The phone tuned on and showed LG sign then switched off.
I tried pressing check any changes as the LG sign came on but nothing.
Then tried nvflash as the LG sign came on but nvflash showed no connection.
Very weird, definitely dead but still charges, doesn't make sense.
Oh well
Ordered an atrix with work and play kit for 68 quid, has a broken digitizer which will cost 20 pound, on average, off ebay.
Thanks for the help though.
May take the 2x apart when new phone comes and see if there's any physical damage on te board.
Sent from my LG-P990 using xda app-developers app
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
What I did on my phone is exactly what I posted, if your computer haven't detected your phone on CP UART I doubt rebooting will make a change, anyways the most important thing to see if your usb is damaged or not is to try on the hidden menu the option CP UART it almost instantly detect the device, but, not everytime, I once waited there 20 min, so, give it a shot if you want, the stock rom I posted (on second post) is Mexico's Telcel stock rom, rooted, it doesn't delete your cwm recovery nor root, you can give it a try if you want, but read the instructions 'cuz you have to restore the ext3 format of your phone's partition to make it work (it stays on boot loop if you don't restore ext3 format), if the backup doesn't work, let me know to upload a new backup, hope you can fix it
cheers
vladutz9 said:
Lucky you! I was to in DM 1.7 but when i was in hidden menu i chosing another port, don´t want to save the settings. Anyway congrats!
Click to expand...
Click to collapse
Hey did you managed to fix the problem yet? did you tried the bakcup I uploaded? it's Mexico's telcel stock rom, rooted, its made by cwm so it doens't delete your cwm recovery, give it a try if the backup doesn't work, let me know to make a new one and upload it ok?
cheers