Database Develop

[Q] Can't root Bell i9000M

Hey,
First of all, I tried to find the answer tot he problem in the forums before posting but I was unsuccessful.
I am having some trouble rooting my Bell i9000M. It came with Froyo when I recieved it. I tried androot, z4root, and SuperOneClick but they all failed. In my forum research I came across some comment that said z4root does notwork with the UGJK4 version.
I am restricted to 2 computers, a Mac and a laptop running Ubuntu Linux, so it'd be difficult for me to use Kies for anything.
What is my next step in rooting the phone?
I also tried to flash a kernel, which I read I can do without root access usining heimdall but this error occured: unknown required load command 0x80000022.
My phone is able to do into 3-button recovery and download modes.
Thanks in advance for your help.
Alex.
edit: spelling

Upgrade to Jl2 use superoneclick it works.
Sent from my GT-I9000 using XDA App

have done a lot of reading over the last week trying to work out how to root my SGS i9000M, checking both these forums as well as android & phandroid, as well as googling the issue and trying the Market. I've also checked out many youtube videos on this topic but they seem out of date now. I note the most recent thread on here by liv4air (march 2011) but it doesn't really help with my query.
I am a total noob with regard to this - only heard about rooting a couple of weeks ago but I definitely like the idea. My 1st handset had to be replaced due to a sound issue (it had 2.2 Froyo) - was replaced with a handset sourced for Canadian market (linked to Bell - has lots of stock apps from them that are useless to me). I'd like to get rid of them to start with, but this handset is running Eclair 2.1 - didn't realise this for awhile after it was replaced and didn't actually understand the differences between the builds and firmware.
So now i've got GT-i9000M, Eclair.UGJH2
kernel [email protected] #2, firmware version 2.1-update1 (updated via Kies).
I have tried the one click root download which put the 'update.zip' file on my SD but when I tried to install this in the recovery mode (have discovered that I have the download and recovery mode buttons - also totally new to me!) there was a red error message:
E:Error in /sdcard/update.zip
(status 7)
Installation aborted.
Have seen the Ryan ZA OCLF in Market too, but understand that the 'rooting' ability has been removed from that app.
Have downloaded the Odin3 program to maybe try to root it via this method but am confused about how to get kernels/which ones to get...or even if that's what I have to do! can find various kernels etc at SamFirmware but not really sure how to use them.
Am I even close to working out how to root this phone!?
Please help!

Flash EZbase : http://forum.xda-developers.com/showthread.php?t=991792 with odin. All the instructions you need are over there.
It's a complete, stock rom except for a few modifications (such as root and cwm recovery), you can choose to download froyo or gingerbread depending on what you want to flash next, if you do.
(Froyo is the 2.2 android OS that has more stable custom roms/kernels while Gingerbread is the new 2.3.3)
Also since you're on a i9000m, you may want to flash a "i9000m" modem (with the 850mhz band) found here: http://forum.xda-developers.com/showthread.php?t=876391 after flashing, but it's not necessary.

Thanks for that link - it looks promising so i'll read through it properly and give it a go soon. I can't query to that forum as it's a development thread but a couple more queries...just want to make sure i don't do anything stupid!
The instructions state: Download all the EZOdin, EZbase CSC, PDA, PHONE and PIT if you do not have Samsung Kies installed, The Samsung USB Drivers will be required to.
Do you know if this means to download ALL those things if I don't have Kies installed, or just PIT if I don't have Kies installed? I do have Kies installed so not sure which of the above I require.
And on the Kies topic, it also states: If Samsung Kies is used please make sure you kill all Samsung Kies related services that are running (kies, tray agent, etc.)
sorry if i'm making you smack your head in disbelief at my ignorance, but does this mean I can use Kies to flash a kernel to my phone (and hence not need the above)...or that when using EZOdin to flash my phone, I need to make sure I have Kies completely shut down during the process?
And I assume by having Kies on my PC, I do not need to download the samsung USB drivers.
Thanks!

What the first sentence means is that you will need the usb drivers if Kies is not installed. There's a period missing I guess.
For the second one, it means you need to close Kies completely before flashing.

Thanks!
Got EZOdin, and the PDA/PHONE/CSC files, but when I click on the EZBase pit file this is all that's written on the page it opens:
v˜4
Edit: don't know why the rest of my post wouldn't complete above, but no luck in downloading the EZOdin.pit file, either at home (or now here at work).
Any thoughts? Reiterating my noob knowledge (or lack thereof) - I assume the .pit file is crucial to the process? Is there anywhere else I get this file, or another .pit file that will suffice?
Maybe i'll do some reading on PIT....

Rooted successfully!
been a bit of a task over the last fortnight trying to work out the ins & outs of rooting, the ways to go about it and to find a method that worked, which i've finally done.
this is really just a post in case anyone in a similar position and feeling as lost as i was along the road to discovery might benefit from how i managed it.
(and this assumes you've already read the many disclaimers out there about bricking your phone, & making sure you do a lot of reading of the threads on this topic)
i ended up using shortfuse superoneclick. got the program from shortfuse.org - v1.9. i downloaded it and ran it with my anitvirus turned off. It worked fine as per the instructions on the website (shortfuse.org) or in the thread here.
Bell Galaxy Vibrant i9000M
recently upgraded from 2.1 to 2.2 via Kies
UGKC1
kernel 2.6.32.9 [email protected] #4
...now to do some proper exploring and fun!

Well done, take your time and,welcome to the world of fast galaxy s!!
Sent from gt i9000 insanity 8.5/fugumod

see these instructions: http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
good kernel, root, cwm and excellent, clear instructions

lgsshedden said:
see these instructions: http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
good kernel, root, cwm and excellent, clear instructions
Click to expand...
Click to collapse
Now rooted and have gone and obtained TiB, Terminal Emulator, Wireless Tether and Root Explorer.
Had the speedmod kernel downloaded and was going to try to flash it to my phone via Odin as per the link you provided but wasn't sure if the kernel itself would root my phone and didn't get replies for my query about that.
So...now that i'm rooted you would still recommend flashing the speedmod kernel? I would assume mainly for the benefits of the kernel itself? Any likelihood of problems arising, having already rooted with SuperOneClick?
Thanks for your advice - the speedmod does sound good and have heard many happy reports from users.

yes it would have rooted you hence my suggestions for using it: sorry to have not been more clear
yes the speedmod kernel would be an upgrade over the stock one but my signature indicates what I use now: very fast and outstanding, not available on xda
I was never able to get oneclick to work as it was blocked on my pc, so my solution stemmed from having to find an alternate answer to a problem like yours
its fun once you get started: lots of help, even more opinion!

[Q] Issues upgrading kernal - DTJP5

G'day Guys,
This is actually my first time posting. I'll also point out that while I am quite technical minded & have been working in IT for a few years.. I haven't yet upgraded to a custom ROM - and as such I'm having issues
Basically, i've got a Froyo GT-I9000 with a build of DTJP5 and recovery console 3e
I've found Darky's mod to be pretty good and i'm wanting to upgrade to it, upon suggestion by the thread for v9.4? i installed Clockwork Mod & ran through the install for that, however now I'm at the part when I'm trying to apply the update.zip and i get the dreaded 3e "Verification Failed" error.
Could anyone help me out and possibly throw me in the right direction?. I'm lost..

To my knowledge, you will keep on getting the "Verification Failed" error. You need to root your phone (because its froyo, on eclair you could simply go and start using the update.zip for clockwork recovery).
Read this thread. Read the instructions, download the required file and get SU (or root) on your phone and then use the custom ROM you had in mind. I though suspect, you will need to flash your original firmware again. Or you could simply use any stock ROM you can lay your hands on.
http://forum.xda-developers.com/showthread.php?t=788108
Good luck mate.

Phone is already rooted using z4Root permanent.
Yea i've had a look at that article a few times, couldn't find a kernal version close enough to mine. Also when going through the ODIN method using the correct kernal from Z4, i just kept getting the error "Check files!"

Need help with installing a custom rom.

Please help!!! I have searched and searched and searched the forums and have come across so many threads on how to add a custom rom to your Captivate.
To start, what I have been trying to do is add a custom rom after upgrading my phone from ver 2.2 to 2.3.3 GB. Some posts say you can just upgrade with the 2.3 on the phone, other posts say you need to take the phone back to the stock 2.1 rom. Then you find posts that say, make sure you have the stock bootloaders and kernals when you downgrade to the stock 2.1.
You can easily see how even a somewhat above novice can get confussed. To take my phone back to 2.1 I have followed posts that say use Odin 1.3. I have used odin before so no big deal. However in this case again you are getting different opionions and versions on this. Some have just the odin .exe and others have the .exe and the MD5 and .ini it the package. I am assuming that the one with just the .exe has everything built in as the size is quite big.
I have tried both ways and after I "Flash" it will not finish with the normal recovery mode and see the linux script. It will go to the ATT window and just keep rebooting over and over. I then will use my JIG and get back in download mode in order to reflash back to 2.3.3 just to get the phone to work again.
Can someone please give me a clue as to what I am doing wrong or direct me to the proper files and maybe some better step by step instructions.
Thanks in advance for the help.

What Rom is currently on you phone? Which Bootloaders do you have installed?
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro

Rhiannon224 said:
What Rom is currently on you phone? Which Bootloaders do you have installed?
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
Click to expand...
Click to collapse
Here is the info:
Firmware: 2.3.3
Baseband: I897UCKF1
Kernel: 2.6.35.7-I897UCKF1-CL273832
Build: GIGERBREAD.UCKF1

^ From the looks of what u posted, it looks like u have the leaked i897uckf1 currently on ur phone. If that is the case, then u could Odin the Cognition Beta 2 Kernel and then flash the latest Cog Rom (having already copied it to ur internal sd).
Just flash the kernel through Odin then use button combo (volume +/- and power...release after u see the at&t screen) to get into CWM 4.0.0.5 and flash Cog 5 v 1.00 from there.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

Are you plugging into a usb port in the back of your pc? Also, there are several methods for flashing back to stock now, once you upgrade to GB bootloaders you don’t ever want to use the Odin with the button fix because it will only flash the secondary bootloader and the primary bootloader will remain GB and the result will be a hardbrick. Also, some of the newer builds came with Froyo installed and using the older 1 click Odin by DesignGears will put those devices in a bootloop. So it really is dependent on your device and your needs. I now use the method outlined in the Continuum 6.1 thread which will not touch the bootloaders and brings you safely back to 2.1 stock. I always clear user data and cache in recovery, flash back to stock using Cezar's method (not a 1 click) prior to flashing a new Rom. Most devs recommend flashing to stock first because there is less chance of corruption.
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro

http://www.youtube.com/watch?v=UOyx5JQ_8_I
MobileTechVideos video is how i flashed my first gingerbread ROM. Its easy, straight forward and he has all the links you will need under the video.
piece-a-cake

Gupone said:
Please help!!! I have searched and searched and searched the forums and have come across so many threads on how to add a custom rom to your Captivate.
To start, what I have been trying to do is add a custom rom after upgrading my phone from ver 2.2 to 2.3.3 GB. Some posts say you can just upgrade with the 2.3 on the phone, other posts say you need to take the phone back to the stock 2.1 rom. Then you find posts that say, make sure you have the stock bootloaders and kernals when you downgrade to the stock 2.1.
You can easily see how even a somewhat above novice can get confussed. To take my phone back to 2.1 I have followed posts that say use Odin 1.3. I have used odin before so no big deal. However in this case again you are getting different opionions and versions on this. Some have just the odin .exe and others have the .exe and the MD5 and .ini it the package. I am assuming that the one with just the .exe has everything built in as the size is quite big.
I have tried both ways and after I "Flash" it will not finish with the normal recovery mode and see the linux script. It will go to the ATT window and just keep rebooting over and over. I then will use my JIG and get back in download mode in order to reflash back to 2.3.3 just to get the phone to work again.
Can someone please give me a clue as to what I am doing wrong or direct me to the proper files and maybe some better step by step instructions.
Thanks in advance for the help.
Click to expand...
Click to collapse
Listen, I'm new at this and learned watchin mobiletech videos from youtube. At first I found it hard but now is pretty easy (in my opinion). The first thin I do is back up apps with titanium and paste to my laptop (for me is faster to install them back), go back to stock 2.2, master reset using dialer (no odin), root, reboot, install rom on sd card, using odin i install bootloaders (I9000), flash talon kernel (odin), flash rom (CWM) and reboot. That's how I do it. Now, I could b wrong but doing it that way, in that pattern works for me. Like I said, I'm new at this but trust me....I've done it several times and it works for me. Keep reading and then decide how you want to do it. Good luck..."HONESTLY"!!!

It all depends on where you are now and where you want to go.
Sent from my SGH-I897 using XDA App

I'm new to all of this and have done a good amount of research but seems like the information never ends and there are a few ways to load a custom rom.
Method one
BACK UP!!!
Flash to stock (FTS)
Wait for your phone to reboot and then re-enable debugging
Hook phone back up to pc and Master Clear (MC) using Odin
Load Clockwork update.zip (DOWNLOAD)
Load FireFly_X-X.zip to phone memory
Remove sim and external SD, and unplug USB
Boot into recovery and reinstall packages (You may have to reinstall packages twice to get to Clockwork recovery)
Once in Clockwork recovery (Green Text), select install zip from SDcard
Next select choose zip from sdcard
Scroll down to FireFly_X-X.zip and select the file
This will run the script and install the ROM to your phone
After this is done, select go back and then select reboot phone
This may take a while, so leave your phone and go grab a snack!
Method 2
Load ROM file onto phone
Boot into recovery
Select ROM and flash it
Reboot, wait and enjoy
Wash, rinse, repeat!
What are the differences? Which one is better?
Seems like the first video is very simple and straight forward?
Am I missing something here? I'm already rooted and used titanium backup.
I'm on 2.2 Froyo and wanting to flash to Firefly 3.0
Thanks!

Help a rusty flasher! (can't go back to stock 2.1 X_X)

Hey folks, I'm a casual flasher and have done most of the pre-requisite background readings. Went from 2.1 -> 2.2 Cognition and then -> 2.3 Serendipity so I can scrape by normally.
Everything was good on 2.3.5 with the GB bootloaders but then I tried to update to ICSSGS 4 but it didn't go well. Got stuck at the boot screen (probably I should have reset to factory settings)..I thought I would try to re-flash Serendipity using Odin but it didn't work.
Ok this is bad..so I tried to restore to all the way back to stock using Odin 1 Click for Rogers. ( http://forum.xda-developers.com/showthread.php?t=979133 ). This successfully got me back to 2.1 and I seem to have retained the GB bootloaders as I still have the i1900 boot screen first. Attempts to re-flash back to 2.3.5 through Odin have resulted in errors, and soft-bricked (pc-!-phone screen). However, I have been able to get back into download mode to restore to 2.1.
So now I need to get back but I'm having issues...
1) can't seem to manually get into recovery mode anymore using 3 button.
2) Wasn't able to unroot using one click unroot...gave me an error type 7 whatever that means.
3) Trying to flash kernels through odin seems to have failed the 2 times I tried it. I'm kind of scared to test my luck to try it again without a jig.
4) So what's the best way to get a kernel with CWM so I can try to get back to 2.3.5 at least?
5) Should I try this new-fangled heimdall instead?
Any assistance is appreciated... I'm afraid of screwing this up even more..

phrenicthenub said:
Hey folks, I'm a casual flasher and have done most of the pre-requisite background readings. Went from 2.1 -> 2.2 Cognition and then -> 2.3 Serendipity so I can scrape by normally.
Everything was good on 2.3.5 with the GB bootloaders but then I tried to update to ICSSGS 4 but it didn't go well. Got stuck at the boot screen (probably I should have reset to factory settings)..I thought I would try to re-flash Serendipity using Odin but it didn't work.
Ok this is bad..so I tried to restore to all the way back to stock using Odin 1 Click for Rogers. ( http://forum.xda-developers.com/showthread.php?t=979133 ). This successfully got me back to 2.1 and I seem to have retained the GB bootloaders as I still have the i1900 boot screen first. Attempts to re-flash back to 2.3.5 through Odin have resulted in errors, and soft-bricked (pc-!-phone screen). However, I have been able to get back into download mode to restore to 2.1.
So now I need to get back but I'm having issues...
1) can't seem to manually get into recovery mode anymore using 3 button.
2) Wasn't able to unroot using one click unroot...gave me an error type 7 whatever that means.
3) Trying to flash kernels through odin seems to have failed the 2 times I tried it. I'm kind of scared to test my luck to try it again without a jig.
4) So what's the best way to get a kernel with CWM so I can try to get back to 2.3.5 at least?
5) Should I try this new-fangled heimdall instead?
Any assistance is appreciated... I'm afraid of screwing this up even more..
Click to expand...
Click to collapse
1) well if you have i9000 bootloaders recovery is 2 button combo. not 3
2) error 7 or whatever that means... search cwm error 7 and find out... and its not error 7, it is STATUS 7. when you get an error, write down the error and type it into google. phone/pc/life...
2b) that is the oldest way to root captivate. search/download " superOneClick Root " nuff said.
3 /4 ) best ONLY way to get a cwm kernel without having Cwm is odin or heimdall, you cant brick flashing kernel, jig not needed. make sure you are using a newer version of odin 1.5 or newer please...
5) not going to hurt trying, but quite different from odin.

Thanks for the quick replies and addressing my various points! Big fan of your one click to stock.
Perhaps a stupid question, but are there disadvantages to using one click odin rom flashing setups such as: http://forum.xda-developers.com/showthread.php?t=1285616 (stock 2.3.5)? Is this safe for me to use from 2.1 (with GB bootloaders)?
Just seems a lot easier than manually choosing files for pda spots etc.

that is the same thing as my one-click-to stock "odin one clicks" but that is ATT and mine is rogers.
however the ATT version is better and higher android version, so i used it myself. but stock roms suck. take some time read up, (read flashing link in my sig) find a nice cool custom rom.

TRusselo said:
that is the same thing as my one-click-to stock "odin one clicks" but that is ATT and mine is rogers.
however the ATT version is better and higher android version, so i used it myself. but stock roms suck. take some time read up, (read flashing link in my sig) find a nice cool custom rom.
Click to expand...
Click to collapse
True, I agree that custom roms are better than stock..I'd just like to get a better proper 'base' to flash my next rom than from 2.1 without cwm and root. I'll check out your guide.

Cannot enter CWM recovery although it's flashed

Hi guys,
First of all, I apologize in advance if this isn't the correct place and/or thread title for my question. I've rarely posted in this forum as I'm usually able to find what I'm looking for.
I'll try to describe the issue fully so bear with me. If you're not patient, skip the next two paragraphs and go to the problem.
I bought my Galaxy S more than two years ago; back then it had Android 2.1 and I believe I also flashed to 2.1.1 via Samsung Kies.
I later flashed Froyo via Odin, rooted with 1ClickLagFix and installed a ton of apps. I haven't updated anything for more than a year, perhaps year and a half. I recently uninstalled many applications I wasn't using, including the lag fix, unrooted and began preparing to flash something newer. I didn't have the time though, so I dropped the project, and besides, the phone is working much smoother without all the unnecessary crap I had before.
Yesterday I decided to finish the job and flash DarkyROM 11 Black Edition. I rooted the phone again using Z4root, installed CWM ROM Manager and flashed CW recovery. I need the recovery in order to flash CM9 and then the ROM per the installation instructions for DarkyROM.
At this point I might as well wait for v.12, but I'll still need the CW recovery I guess. Or I may flash v.11 as planned; I still haven't decided.
The problem: CW recovery is flashed, but when I reboot I go to 3e recovery instead (tried with the 3 buttons or boot to recovery from ROM Manager, same result). I then copied the CW recovery file directly on the SD card and renamed it update.zip (it was recovery-update.zip) and tried to apply it. Didn't work. As far as I remember it said it couldn't verify file integrity or something. I can check for sure if you'd like.
Here's what I'm running (I'll put what I see, let me know if you need more):
GT-I9000
Firmware: 2.2
Baseband version: I9000XXJPP
Kernel version: 2.6.32.9
[email protected] #1
Build number: FROYO.XFJP7
ROM Manager (installed v. 5.5.1.4 yesterday) says current recovery is ClockworkMod 2.5.1.2.
I'd appreciate any insight. I don't have much experience flashing my phone, so if you have a solution, it would be best to include not only links to relevant threads but also an explanation as to what steps I should follow in my specific case.
Thanks in advance!

Filkolev said:
Hi guys,
First of all, I apologize in advance if this isn't the correct place and/or thread title for my question. I've rarely posted in this forum as I'm usually able to find what I'm looking for.
I'll try to describe the issue fully so bear with me. If you're not patient, skip the next two paragraphs and go to the problem.
I bought my Galaxy S more than two years ago; back then it had Android 2.1 and I believe I also flashed to 2.1.1 via Samsung Kies.
I later flashed Froyo via Odin, rooted with 1ClickLagFix and installed a ton of apps. I haven't updated anything for more than a year, perhaps year and a half. I recently uninstalled many applications I wasn't using, including the lag fix, unrooted and began preparing to flash something newer. I didn't have the time though, so I dropped the project, and besides, the phone is working much smoother without all the unnecessary crap I had before.
Yesterday I decided to finish the job and flash DarkyROM 11 Black Edition. I rooted the phone again using Z4root, installed CWM ROM Manager and flashed CW recovery. I need the recovery in order to flash CM9 and then the ROM per the installation instructions for DarkyROM.
At this point I might as well wait for v.12, but I'll still need the CW recovery I guess. Or I may flash v.11 as planned; I still haven't decided.
The problem: CW recovery is flashed, but when I reboot I go to 3e recovery instead (tried with the 3 buttons or boot to recovery from ROM Manager, same result). I then copied the CW recovery file directly on the SD card and renamed it update.zip (it was recovery-update.zip) and tried to apply it. Didn't work. As far as I remember it said it couldn't verify file integrity or something. I can check for sure if you'd like.
Here's what I'm running (I'll put what I see, let me know if you need more):
GT-I9000
Firmware: 2.2
Baseband version: I9000XXJPP
Kernel version: 2.6.32.9
[email protected] #1
Build number: FROYO.XFJP7
ROM Manager (installed v. 5.5.1.4 yesterday) says current recovery is ClockworkMod 2.5.1.2.
I'd appreciate any insight. I don't have much experience flashing my phone, so if you have a solution, it would be best to include not only links to relevant threads but also an explanation as to what steps I should follow in my specific case.
Thanks in advance!
Click to expand...
Click to collapse
clockworkmod 2.... really ? because cwm 5 or 6 is the actual version .. maybe rom manager cannot flash the recovery in froyo, try to connect phone .with kies and update to gingerbread
Sent from my GT-I9001 using xda premium

Jonboy2011 said:
clockworkmod 2.... really ? because cwm 5 or 6 is the actual version .. maybe rom manager cannot flash the recovery in froyo, try to connect phone .with kies and update to gingerbread
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
Can't do... Kies cannot upgrade the firmware since I'm on a custom ROM (or because it didn't match my country, I don't quite remember the reason).
I was following the installation instructions for DarkyROM for Froyo; it says I should have it rooted with CWM and use the recovery to flash CM9 and the ROM itself afterwards, so I believe Froyo isn't the issue. The kernel perhaps? Have no idea, I'm a novice more or less. I do know how to follow instructions though, so I'm not a complete idiot
Besides geting a newer ROM with newer Adnroid version I'd also like to clean up the mess I've been creating for the past year and a half. Maybe flashing a stock ROM and then DarkyROM would be easier. I'm looking for the most time-efficient method.