Installing Darky's / Axura ROM - Galaxy S I9000 Q&A, Help & Troubleshooting

Hey everyone, I'm trying to play with a couple ROMS, starting with the Darky 7.7 ROM from stock Froyo 2.2 on a Galaxy S i9000.
I've done the following:
1) Rooted the phone using SuperOneClick (proven to be rooted with ROM Manager).
2) Transfered the Darkys ROM.zip to the internal SD Card
3) Downloaded and copied ClockworkMod from the original post (file is update.zip) and transferred this to my internal SD Card
4) Gone into ROM Manager, selected Flash ClockWorkMod Recovery
5) Select Install ROM from SD card
6) Selected Darkys_V7.7_Gingerbread_.....zip
7) Prompted with Backup Existing, or Wipe Data and Cache. I chose Wipe. It tells me I will be brought into recovery to continue.
8) Chose apply sdcard:update.zip
Receive the following error:
Install default apk-files, finished
--Install from sdcard...
Finding update package...
Opening update package...
Verifiying update package...
E: Failed to verify whole-file signature
E: Signature verification failed
Installation aborted.
Where have I gone wrong? Any help is appreciated

Go to recovery mode (power off then vol up+home+power). If you're already using clockworkmod, then select install zip from sd card. If you're not using cwm yet, select install update.zip to give you cwm then choose install zip in sdcard.
Sent from my GT-I9000 using XDA App

Kops said:
E: Failed to verify whole-file signature
E: Signature verification failed
Installation aborted.
Click to expand...
Click to collapse
You need to install a kernel that has 2e recovery, this version doesn't verify file signatures, or go back to 2.1.

I see now when I enter recovery mode at the top it says Android Recovery 3e. I'm assuming that should say Clockworkmod Recovery.
It is the next step I'm stumped with
What is an example of a kernel that runs 2e? Flashing is done through ODIN correct? Can you help me figure out how to flash in ODIN, or where I can find a 2e kernel for my i9000?

Grab the latest speed mod kernel from hardcore in the dev section, flash that via odin and it will be 2e recovery. Then follow darkys instructions and flash his rom. After his rom is on depending on where you are you might have to flash your original stock modem but only do that if your phone doesn't register on your network.
Sent from my GT-I9000 using XDA App

spectre85 said:
Grab the latest speed mod kernel from hardcore in the dev section, flash that via odin and it will be 2e recovery. Then follow darkys instructions and flash his rom. After his rom is on depending on where you are you might have to flash your original stock modem but only do that if your phone doesn't register on your network.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I am having difficulties flashing via ODIN. Can you help me find some help, perhaps an ODIN guide of some kind?
I have found a UGJH2 kernel that should be 2e recovery, now I just need to learn to flash it.

Kops said:
I am having difficulties flashing via ODIN. Can you help me find some help, perhaps an ODIN guide of some kind?
I have found a UGJH2 kernel that should be 2e recovery, now I just need to learn to flash it.
Click to expand...
Click to collapse
open odin Put kernel into pda put phone into download mode then connect phone to pc.. The comm port will turn yellow the pres start. Does that stock kernel have 2e?

Can someone people tell me what odim in.. I'm new to this and I've rooted/installed rom on my phone but I'm planning to do more to it.. finding the best rom and stuff.
Sent from my SAMSUNG-SGH-I897 using XDA App

i897-63784 said:
Can someone people tell me what odim in.. I'm new to this and I've rooted/installed rom on my phone but I'm planning to do more to it.. finding the best rom and stuff.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
ODIN is a program that flashes individual kernels, CSC's, modems and other bits to your phone. It's one of the methods used to flash ROMs also. If you search the forums (or even Google) you should be able to get everything together. I recommend searching for ODIN, the 512 pit file, and then following the instructions below to re-root your phone.
http://forum.xda-developers.com/showpost.php?p=8238938&postcount=1
Any problems you can PM me.

Kops said:
I am having difficulties flashing via ODIN. Can you help me find some help, perhaps an ODIN guide of some kind?
I have found a UGJH2 kernel that should be 2e recovery, now I just need to learn to flash it.
Click to expand...
Click to collapse
Check my post below, it hopefully should help, if not, you can PM me.

Related

[Q] ClockworkMod Recovery doesn't work

Hi everyone.
I installed ROM Manager and flashed ClockworkMod Recovery, but even though the phone said it successfully flashed it, when I enter recovery mode I get the stock recovery. I even tried using the apply sdcard:update.zip option, but it gives me an error:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
I even considered installing Amon RA's recovery, but there doesn't seem to be a version compatible with this phone. What should I do? Is there another recovery you'd suggest me to install? If not, what can I do to get the ClockworkMod Recovery to work? Any help would be much appreciated
You must have recovery 3e. Oh well, just flash hardcore's speedmod latest kernel in the Android development section via Odin to get cwm.
Sent from my GT-I9000 using XDA App
Sorry if my questions are too basic, but I'm a new Android user.
android.francis said:
You must have recovery 3e.
Click to expand...
Click to collapse
When I enter the stock recovery mode, it says Android system recovery <3e>. Does that mean anything?
android.francis said:
Oh well, just flash hardcore's speedmod latest kernel in the Android development section via Odin to get cwm.
Click to expand...
Click to collapse
On the creator's blog it says that SpeedMod "works on all stock Froyo ROMs XXJPO/DXJPA/XWJPA and popular custom ROMs", although his thread doesn't state so. My ROM is Froyo I9000BUJP7; am I safe installing this kernel? Also, I don't know if it matters, but my phone is network locked.
Thanks for your help.
The reason you can't flash cwm is because you have recovery 3e which does not allow unsigned .zip
You must have 2e recovery. There is a way to get 2e but you gotta search for it. I'm on the road driving so I am a bit pre occupied to search for you.
Easiest way for you is to flash the latest speedmod kernel via Odin.
Sent from my GT-I9000 using XDA App
android.francis said:
The reason you can't flash cwm is because you have recovery 3e which does not allow unsigned .zip
You must have 2e recovery. There is a way to get 2e but you gotta search for it. I'm on the road driving so I am a bit pre occupied to search for you.
Easiest way for you is to flash the latest speedmod kernel via Odin.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
As android.francis said your best bet is to flash a kernel with 2e. I use cf root it always does the job for me.. http://forum.xda-developers.com/showthread.php?t=788108
I am having the same issue, now installed the Speedmod kernel, how can I enter the CWR now?!
My stock recovery still says 3e
Hello,
I had the same problem and I used cf root too. It works very well and if you use a stock rom you will find the rigth kernel there. I only had some problems to find the rigth kernel for my branding firmeware, because this I flashed a stock rom before and after cf root.
Clockwordmod Rom Mgr boots into 3e but up button/power/menu button boots speedmod 2e.
Here is a weird one I think. I installed stock JVH 2.3.3 (from wuala site I9000XWJVH.7z) which I rooted with CF-Root (CF-Root-WX_NEE_JVH-v3.2-CWM3RFS.tar) and then applied Speed mod (speedmod-kernel-k15h-t24-300hz.tar). If I press the 3 button combination I get the speedmod 2e recovery and can backup and restore, install update.zips and reformat partitions to ext4 just fine. So far so good. All updates performed using ODIN.
Here is the problem. I installed a 'paid for' version of ClockworkMod Rom manager (from the market) but when I select backup or 'reboot into recovery' I get the stock 3e kernel and it fails.
Any ideas?
Thanks

[Q] Clockworkmod Recovery error: signature verification failed!

Hi all,
I installed JPY (2.2.1) Rom on my SGS yesterday, rooted my phone with SuperOneClick.
Tested the phone, everything is ok and the root is also ok.
Then installed Clockworkmod, flash cwm recovery 2.5.1.2, click on Backup, the phone automatic rebooted but presented my with a normal recovery screen.
In it I can do something like; a factory reset, clean card data, restart or click on update.zip (I thing that goes to the update.zip that cwm put on my sdcard).
But when I click it gives this error:
Install from package...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Tried everything... What can I do in order to cwm works and backups my sgs??
All the help is appreciated...
Thanks,
you loose 2e recover when going to froyo.. needed for clockwork ..
flash a kernel that restores it ie
chainfire/cf or speedmod or backlight notifiction ie bln kernel.
lgkahn said:
you loose 2e recover when going to froyo.. needed for clockwork ..
flash a kernel that restores it ie
chainfire/cf or speedmod or backlight notifiction ie bln kernel.
Click to expand...
Click to collapse
So what are you saying is that CWR doesn't work with 3e recovery? Only with 2e?
Because 3e does not allow unsigned zips hence the error message..
Sent from my GT-I9000 using XDA App
Sâmes problem for me... No solution found yet ...
Sent from my GT-I9000 using XDA App
install CF-root http://forum.xda-developers.com/showthread.php?t=788108 to get 2e recovery then reflash CWM recovery and try again...
striken said:
So what are you saying is that CWR doesn't work with 3e recovery? Only with 2e?
Click to expand...
Click to collapse
ah ya.. the "needed for clockwork" in my original message pretty much states that.
android.francis said:
Because 3e does not allow unsigned zips hence the error message..
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Thanks for the explanation,
Didn't know why it works with one and not the other...
Anyway, its working now, thanks for all the help!
For anyone that has the same problem, here is what I did:
Flashed the phone with I9000XXJPY and with Odin. You can find JPY here: http://www.multiupload.com/UHJNT0K1F2
Put PIT 512 in PIT and in PDA put the file JPY_JPY_JPY.tar (no repartition selected).
Shutdown the phone after it starts.
Start Odin again and in PDA put this file: CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1
You can download it here:
http://forum.xda-developers.com/showthread.php?t=788108
After that you can install CWM. When you click in backup and the phone restarts see if 2e restore appears in top of the screen if so all is ok.
Also, if a normal screen appears just click in update.zip and after that you will see the cwm screen.
In the cwm recovery screen the sgs buttons are like this: back button is the “enter” and the “menu” is the back button.
P.S. If you need to install TPH for Portuguese language just tell me, cause the CSC installed is KOR and you don't have TPH in CSC file to install.
Once again, Thanks to all who help me!
striken said:
Thanks for the explanation,
Didn't know why it works with one and not the other...
Anyway, its working now, thanks for all the help!
For anyone that had the same problem, here is what I did:
Flashed the phone with I9000XXJPY and with Odin. You can find JPY here: http://www.multiupload.com/UHJNT0K1F2
Put PIT 512 in PIT and in PDA put the file JPY_JPY_JPY.tar (no repartition selected).
Shutdown the phone after it starts.
Start Odin again and in PDA put this file: CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1
You can download it here:
http://forum.xda-developers.com/showthread.php?t=788108
After that you can install CWM. When you click in backup and the phone restarts see if 2e restore appears in top of the screen if so all is ok.
Also, if a normal screen appears just click in update.zip and after that you will see the cwm screen.
In the cwm recovery screen the sgs buttons are like this: back button is the “enter” and the “menu” is the back button.
P.S. If you need to install TPH for Portuguese language just tell me, cause the CSC installed is KOR and you don't have TPH in CSC file to install.
Once again, Thanks to all who help me!
Click to expand...
Click to collapse
Great explanation but for the record (for anyone looking for a solution), if you're already on a 2.2 firmware, you can simple start at the step of flashing a custom kernel that supports CWM (i.e. there's no need to first flash to JPY).
gtg2 said:
Great explanation but for the record (for anyone looking for a solution), if you're already on a 2.2 firmware, you can simple start at the step of flashing a custom kernel that supports CWM (i.e. there's no need to first flash to JPY).
Click to expand...
Click to collapse
That's a thing I didn't know.
Winrar is asking for a password?
imprezzadude said:
Winrar is asking for a password?
Click to expand...
Click to collapse
On what files?
On the I9000JPY file. Sorry i didnt specify. Been a loong day lol
I am Facing Similar problem...
i wanted to install new rom on my phone ...i.e. darky's v 8.0
so i rooted my phone with z4root, then downloaded the rom and the update.zip file for clockward mod on to internal sd card..
and when tried to run update.zip file in normal recovery mode to get into clockward recovery i got the same signature error
i looked for solutions..got to know about rom manager..downloaded it and installed clockward mod through it..and then tried to reboot into clockward recovery ...it will bring me to same normal recovery screen...so basically stuck and cant get to clockward recovery...please help
my phone details
model gt-i9000
firmware:2.2
baseband : i9000zsjpe
deepumalik said:
I am Facing Similar problem...
i wanted to install new rom on my phone ...i.e. darky's v 8.0
so i rooted my phone with z4root, then downloaded the rom and the update.zip file for clockward mod on to internal sd card..
and when tried to run update.zip file in normal recovery mode to get into clockward recovery i got the same signature error
i looked for solutions..got to know about rom manager..downloaded it and installed clockward mod through it..and then tried to reboot into clockward recovery ...it will bring me to same normal recovery screen...so basically stuck and cant get to clockward recovery...please help
my phone details
model gt-i9000
firmware:2.2
baseband : i9000zsjpe
Click to expand...
Click to collapse
How about
1. Repartition with a 512 pit from odin.
2. Flash Stock JM8 or JM9 (Usually i am flashing JM8 when things get messed)
3. Use update zip and install clockworkmod from it . (you will not have any signature errors because now you have recovery 2e)
4. Sometimes you will have to apply sd card update twice to get to CWM.
5. Vola, now you have working clockworkmod recovery and you can flash whatever the things you want with it
androidsl said:
How about
1. Repartition with a 512 pit from odin.
2. Flash Stock JM8 or JM9 (Usually i am flashing JM8 when things get messed)
3. Use update zip and install clockworkmod from it . (you will not have any signature errors because now you have recovery 2e)
4. Sometimes you will have to apply sd card update twice to get to CWM.
5. Vola, now you have working clockworkmod recovery and you can flash whatever the things you want with it
Click to expand...
Click to collapse
horrible suggestion you both need to search b4 posting.. been posted multiple at least 20 times now.. you DONT need to go install a new rom and blow everything away on your phone just to get 2e recovery so clockwork works.. search search.. there are kernels out there you can flash to get back 2e recovery
lgkahn said:
horrible suggestion you both need to search b4 posting.. been posted multiple at least 20 times now.. you DONT need to go install a new rom and blow everything away on your phone just to get 2e recovery so clockwork works.. search search.. there are kernels out there you can flash to get back 2e recovery
Click to expand...
Click to collapse
Oh yeah. forgot to mention it. there is a post that have a kernel which gives you recovery 2e on JPY firmware. (Don't know other firmwares has it or not)
Anyway, in my case i like to blow everything and start all over when i got messed up. because i don't use my sgs for very precious works. i'm just playing with it
Kudos to the lgkahn for bringing this kernel thing up
lgkahn said:
horrible suggestion you both need to search b4 posting.. been posted multiple at least 20 times now.. you DONT need to go install a new rom and blow everything away on your phone just to get 2e recovery so clockwork works.. search search.. there are kernels out there you can flash to get back 2e recovery
Click to expand...
Click to collapse
I am really a starter..when it comes to all this will be able guide me a little bit please..what exactly do you mean and what do i search for...thanks a lot for all your help...
Okay..seems like this thread is getting nowhere..
Go to the android development section and look for hardcore's speedmod kernel. Download the latest version and flash it via Odin.
Btw, let me give you a tip once you are in hardcore's thread. PLEASE READ THE FIRST 3-4 POSTS AND FOLLOW INSTRUCTIONS.
I don't think you are exerting enough effort to research here in the forum so I just gave you one of the simplest and shortest step to have CWM directly.
Sent from my GT-I9000 using XDA App
is it OK to use Stericssion autosin.bat to sign the update.zip downloaded by CWM and then flash it using recovery 3e? We will not have to flash the CF Kernel.

Problem flashing custom roms!

So I have a Samsung galaxy captivate and I have searched constantly for a fix. What the problem is I have gingerbread 2.3.5 and it's just not working when I flash roms. I think I have the wrong cmw recovery. When I try and flash cmw recovery it doesn't give me the captivate option I am rooted. Whenever I try to install rom from sd card I can never find the file and I only have this update.zip so when I try and flash I get the E failed to verify whole-file signature and the the other e: fail thing. Please help! Thanks!
P90 said:
So I have a Samsung galaxy captivate and I have searched constantly for a fix. What the problem is I have gingerbread 2.3.5 and it's just not working when I flash roms. I think I have the wrong cmw recovery. When I try and flash cmw recovery it doesn't give me the captivate option I am rooted. Whenever I try to install rom from sd card I can never find the file and I only have this update.zip so when I try and flash I get the E failed to verify whole-file signature and the the other e: fail thing. Please help! Thanks!
Click to expand...
Click to collapse
ROM Manager works fine for 2.1, but not for anything else. You need to download any 2.3 kernel that already has CWM baked into it and flash it with Odin or Heimdall. What I would do is go into the development thread and pick any gingerbread-based ROM that is already packaged for Odin or Heimdall and flash that. Then you'll have CWM and you can go from there.
But when I try and flash roms I always get an error!
P90 said:
So I have a Samsung galaxy captivate and I have searched constantly for a fix. What the problem is I have gingerbread 2.3.5 and it's just not working when I flash roms. I think I have the wrong cmw recovery. When I try and flash cmw recovery it doesn't give me the captivate option I am rooted. Whenever I try to install rom from sd card I can never find the file and I only have this update.zip so when I try and flash I get the E failed to verify whole-file signature and the the other e: fail thing. Please help! Thanks!
Click to expand...
Click to collapse
Just do Step 1 of my little guide here
http://forum.xda-developers.com/showthread.php?p=21556191#post21556191
continue steps if you want Ice Cream Sandwhich
P90 said:
But when I try and flash roms I always get an error!
Click to expand...
Click to collapse
You're getting errors because you're trying to flash from recovery but you don't have CWM. You can't flash anything from recovery until you have it. Like I said, you need an Odin or Heimdall package, not a CWM package.
Go here http://forum.xda-developers.com/showthread.php?t=1406877
Download the Odin One Click Package. Do some research and teach yourself how to use Odin and the risks involved, then flash it. This will give you CWM and you can then flash anything you want from there.
i already have the heimdall suite but i have no idea what to do with it or how to get cmw on my phone!
Sir refer to this and this and this. Read the stickies for newbs and understand before you flash ANYTHING. You might end up with a nice hard brick...
P90 said:
i already have the heimdall suite but i have no idea what to do with it or how to get cmw on my phone!
Click to expand...
Click to collapse
jayRokk posted a quote with a brief tutorial and I gave you a link with a one click flasher, both of which will put CWM on your phone.
You need to peruse the stickies in the development section to learn the ropes before you start flashing with Odin or Heimdall. There are risks involved that you need to fully understand and the process for how to do it safely has been covered many, many times in there.
Start here: http://forum.xda-developers.com/showthread.php?t=858765
Learn the terminology, the risks, and what to do when something goes wrong, and then go to town.
Seriously just follow that first step i posted to my link and youll be able to flash
ANY
rom you wish!
lol
---------- Post added at 01:02 AM ---------- Previous post was at 12:38 AM ----------
Just did a whole tutorial on how to flash ANY rom the easy way
check it out
http://forum.xda-developers.com/showthread.php?t=1479458
and direct if someone still has problems or issues after reading the stickies
thnx
Ok will do. I just flashed.
Now whenever I try and flash mosaic 9 it keeps getting stuck on replacing stock recovery with clockwork mod recovery. And when I open rom manager it doesn't even show galaxy captivate
DONT DONT DONT DONT DONT DONT
use RomManager
when flashing place a rom on sd card
boot up to recovery (pressing Vol+ Vol- and Power)
flash from there!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
DONT i repeat
DONT!!!!!!!!!
use RomManager or any RomManager recovery!!
Ok well how else do I do it?
P90 said:
Ok well how else do I do it?
Click to expand...
Click to collapse
Did you not read my guide or my last comment?!?!?!?
Sent from my GT-I9000 using XDA App
None of your links ever work
I know you're frustrated...
But do you really think you'll get more help by name-calling? All of the links posted in the thread above take you to useful tutorials on how to flash ROMs using methods other than ROMManager. I've not used ROMManager for, well, anything since the Eclair-based ROMS.
Breathe deep, put the phone down for a bit, and read the links. You'll get a successfull ODIN or Heimdall flash following the methods described therein. I promise!
None of the downloads work though man!
Yes they do... I just checked all of them...
Dude...in the mosaic thread, the second post has an Odin package of the ROM.
Just .tar in pda slot, when it's done it'll boot into cwm, from there just wipe data/factory reset and reboot. Bingo bango you're on mosaic
Thank you so much I'll do it now. It works with 2.3.5 gingerbread correct?

[Q] android system recovery <3e>

Ok... from the top - I've done a good amount of flashing custom ROMs (B & N Nook and Captivate) and reading on forums but I'm currently stumped. I can't boot into the ClockworkMod recovery - instead I go to the stock android system recovery <3e>. This has been my complete procedure:
1 - Odin3 one-click downloader and connect phone in downloading... mode, click "start" to go back to stock
2 - odin one click "master clear"
3 - Samsung Kies update to Android 2.2 froyo and then Android 2.3 Gingerbread
4 - One click root
5 - Put .zip of ROM on internal sd root
6 - Odin3 v1.82 load ClockworkMod Recovery .tar
Now here is where I am stuck - I have the most up to date ClockworkMod Recovery but I can't boot into anything but the stock android system recovery <3e> (either through the app or by holding volume up and down and powering on) - where if I change the zip file name to update and try to apply update from sdcard I get an error that the signature verification failed. I'd like to install the latest build of ICS but I am just stuck - any help would be greatly appreciated!
Thank you,
You'll need a kernel with the non-3e recovery baked in. You can either flash a Gingerbread kernel with CWM (e.g. Boog's kernel) or flash a stock gingerbread rom with CWM in the kernel.
Ok - thank you. I have downloaded that Heimdall one-click .jar file. However I'm having trouble opening it... I feel really foolish ont his but if I extract the files I see a readme file that says I shouldn't be reading it and I have gone the wrong way. But if I open the unextracted file it tries to open in WinRAR and again non of the files seem like a program file that I can just open and run. Sorry about this...
No problem - just double-click the file. The .jar is an executable file that will install the necessary drivers, open the heimdall program, and get everything ready to flash. Once it's ready and sees your phone in download mode, all you have to do is click flash and it will do the rest.
I have now figured out ICS - I think I had the wrong .zip I was trying to install... Does the ICS allow for overclocking?
Ok - my apologies again for keeping going with this (but my main goal is to get to ICS) with that kernel it wouldn't let me install ICS (but I was able to do the latest CyanogenMod). On the Team Hacksung Wiki page FAQ on Galazy S it looks like CM7 kernels don't work - did the one I installed from the above thread have a CM7 kernel?
Does anyone know of a specific kernel I can use to go from stock 2.3.5 so I can boot into ClockworkMod Recovery and install the ICS zip?
I'm sorry - I needed to update or install Java... Then I needed to install the correct drivers - automatically routed to this through the Heimdall program so it was easy enough (I think this has to do with switching between ODIN and Heimdall). Thank you again so much for the help. Time to give ICS a shot
YouTube ics video I had the same issue boog kerneral with cwm baked in it att boot loaders follow the instructions I'm using works great
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Flash back to stock 2.1 which includes the 2e recovery which doesn't have signature checks. With that you can flash a cwm zip and get into the clockworkmod recovery. On the captivate you gotta reinstall the the update zip twice, once to install cwm, the other to actually go into cwm.
Sent from my glitched ICS Captivate using XDA App
cmilldrummin said:
Flash back to stock 2.1 which includes the 2e recovery which doesn't have signature checks. With that you can flash a cwm zip and get into the clockworkmod recovery. On the captivate you gotta reinstall the the update zip twice, once to install cwm, the other to actually go into cwm.
Sent from my glitched ICS Captivate using XDA App
Click to expand...
Click to collapse
I wouldn't recommend flashing back to 2.1, as it is much easier to simply flash a kernel with CWM baked in.
That is also an option, both able to be done with several clicks of a button.
Sent from my glitched ICS Captivate using XDA App
any help?
i try to enter to APPLY SDCARD:UPDATE.ZIP
but have the same error :
E: failed to verify whole-file signature
E:signature verifcation failed
i have galaxy i9000b
also have the superuser , 2.2.1 froyo and wanna upg to ice cream or anything new
i read i have to change the android systema recovery <3e> to 2e ??
here i found a lynck with 3e-fix-unzip-uninstall
but these is for Captivate and doesn't work for i9000b ?
Yea 3e recovery has a signature check, and clockworkmod zips are not officially "signed." Either flash back to stock 2.1 eclair which has 2e recovery w/o signature checks, or flash a custom kernel with cwm already included, as suggested above. I cannot speak for if the modded 3e recovery will work on an i9000b.
Sent from my glitched ICS Captivate using XDA App
Edit: this 3e mod should work on the i9000b, and has worked great for me http://forum.xda-developers.com/showthread.php?t=731989
Sent from my glitched ICS Captivate using XDA App
Thanks for this link

Can't load any ROM in my SGH-I897

hi
I'm writing for the first time although I've been visiting the forum for couple of weeks as I'm facing a problem with my samsung SGH-I897.
PROBLEM HISTORY
it was a present to me which was already rooted and loaded with ICS rom (I can't remember the version, kernel, baseband or build no). 2 weeks back, I tried to upgrade the phone with JB Slim custom rom (www.android.gs/update-galaxy-captivate-i897-jelly-bean-slim/) but stuck with AT&T bootlogo. I tried to go back to ICS again but accidentally did something wrong in CWM recovery (don't know the version) for which CWM went back to original 3e version.
Since then I couldn't load any rom (by CWM or Odin) bcos there was error in CWM saying failed to mount /dbdata... etc. 2 days ago I found a fix for that in blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
Then I loaded GB rom 2.3.5 , baseband I897UCKJ1 , kernel 2.6.35.7-I897UCKJ1-CL614489 . But my CWM is still 3e.
THE PROBLEM NOW
1) I am trying to update the captivate but every time I try to update I get this:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
I've tried Lanight, Slim Rom (again) but no use. what should I do?
2) Maybe there is a kernel issue (it says here forum.xda-developers.com/showthread.php?t=1874327 ). So to flash new kernel I followed the instruction from androidprof.blogspot.com/2013/02/upgrading-rooting-and-then-installing.html?goback=%2Egde_86481_member_213543419 and forum.xda-developers.com/showthread.php?t=1350266 but Odin hangs at midpoint and the captivate becomes softbricked. Then again I have to load the GB. is the odin defective? (I used odin 1.85 & odin3)
3) I tried to load GB I897UCKK4 by one click odin installer but it hanged everytime. why?
thanx in advance
Sent from my GT-I9070 using xda app-developers app
shiploo35 said:
hi
I'm writing for the first time although I've been visiting the forum for couple of weeks as I'm facing a problem with my samsung SGH-I897.
PROBLEM HISTORY
it was a present to me which was already rooted and loaded with ICS rom (I can't remember the version, kernel, baseband or build no). 2 weeks back, I tried to upgrade the phone with JB Slim custom rom (www.android.gs/update-galaxy-captivate-i897-jelly-bean-slim/) but stuck with AT&T bootlogo. I tried to go back to ICS again but accidentally did something wrong in CWM recovery (don't know the version) for which CWM went back to original 3e version.
Since then I couldn't load any rom (by CWM or Odin) bcos there was error in CWM saying failed to mount /dbdata... etc. 2 days ago I found a fix for that in blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
Then I loaded GB rom 2.3.5 , baseband I897UCKJ1 , kernel 2.6.35.7-I897UCKJ1-CL614489 . But my CWM is still 3e.
THE PROBLEM NOW
1) I am trying to update the captivate but every time I try to update I get this:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
I've tried Lanight, Slim Rom (again) but no use. what should I do?
2) Maybe there is a kernel issue (it says here forum.xda-developers.com/showthread.php?t=1874327 ). So to flash new kernel I followed the instruction from androidprof.blogspot.com/2013/02/upgrading-rooting-and-then-installing.html?goback=%2Egde_86481_member_213543419 and forum.xda-developers.com/showthread.php?t=1350266 but Odin hangs at midpoint and the captivate becomes softbricked. Then again I have to load the GB. is the odin defective? (I used odin 1.85 & odin3)
3) I tried to load GB I897UCKK4 by one click odin installer but it hanged everytime. why?
thanx in advance
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
From your signature, you have a GT-I9070, which is a different device. This section is for the Captivate.
Perhaps this link can help you: http://forum.xda-developers.com/showthread.php?t=1985398
NO, it's Captivate
BWolf56 said:
From your signature, you have a GT-I9070, which is a different device. This section is for the Captivate.
Perhaps this link can help you: http://forum.xda-developers.com/showthread.php?t=1985398
Click to expand...
Click to collapse
I used my wife's cell to post. So it is Captivate SGH-I897 that is giving me problem.
See TRusselo's Guide here ---> http://forum.xda-developers.com/showthread.php?p=19425513
Sent from my SAMSUNG-SGH-I747 using xda premium
tried and didn't work
4-2ndtwin said:
See TRusselo's Guide here ---> http://forum.xda-developers.com/showthread.php?p=19425513
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Yes I've tried but odin hangs during flashing of speedmod kernel (everytime).
THANX anyway.
Did ya take a look at this Captivate - PC Connection Issues thread ?? ...http://forum.xda-developers.com/showthread.php?p=33227541
And u could flash the .tar file of KK4 Corn Kernel instead of the Speedmod kernel...http://forum.xda-developers.com/showthread.php?p=18233847
Sent from my SAMSUNG-SGH-I747 using xda premium
odin hangs
4-2ndtwin said:
Did ya take a look at this Captivate - PC Connection Issues thread ?? ...http://forum.xda-developers.com/showthread.php?p=33227541
And u could flash the .tar file of KK4 Corn Kernel instead of the Speedmod kernel...http://forum.xda-developers.com/showthread.php?p=18233847
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
thank you 4-2ndtwin,
I think the pc connection is ok bcos I can flash the GB 2.3.5 I897UCKJ1 ROM by odin 3. (infact it's the only ROM I can flash)
And Odin cannot flash the kk4 kernel, it hangs at midpoint.
SO FAR HERE GOES THE SUMMERY
I can only flash the above mentioned ROM. No other ROM, kernel, CWM recovery can't be loaded by Odin 1.85 or 3.
Same goes for flashing through recovery mode. there's always signature verification failure error (see 1st post)
bad usb driver, connector or cable can cause intermittent fail like that, mid flash, even though it looks okay when you start. also, have you tried redownloading your sources? signature verification can mean failed md5 checksum= corrupt source file.
Out of curiosity, did you accidentally enable the signature verification in speedmod? I did that yesterday while installing Captivating and it'll throw the signature verification error lol. Just click it again in CWM and you should be able to get passed the signature verification.
laughingT said:
bad usb driver, connector or cable can cause intermittent fail like that, mid flash, even though it looks okay when you start. also, have you tried redownloading your sources? signature verification can mean failed md5 checksum= corrupt source file.
Click to expand...
Click to collapse
I don't know, if it's bad usb driver, connector or cable how come they always give trouble during flashing everything except I897uckj1 rom?
and, I'll try redownloading the sources (have to browse the history)
nope
x0ne215 said:
Out of curiosity, did you accidentally enable the signature verification in speedmod? I did that yesterday while installing Captivating and it'll throw the signature verification error lol. Just click it again in CWM and you should be able to get passed the signature verification.
Click to expand...
Click to collapse
there's no such option in my cwm. the cwm is 3e and very limited. it has only 4 option... reboot, update from zip, wipe factory data, wipe cache.
CWM and 3e recovery are 2 different things. CWM is a CUSTOM recovery, 3e is the stock recovery. It sounds like you're still on stock recovery.
Have you tried using ADB to push a CWM recovery.img to the device? There should be some tutorials or posts on other threads here about doing it. I had to do that for my Pantech Crossover.
Once you do that, you can flash a ROM no problem.
x0ne215 said:
... It sounds like you're still on stock recovery
Have you tried using ADB to push a CWM recovery.img to the device?....
Once you do that, you can flash a ROM no problem.
Click to expand...
Click to collapse
ok thanx, this ADB thing is sounds complicated to me. but I'll learn it.
bad news
ok... bad news.. phone is hard bricked... no download mode, no charging battery display when plugged to wall... this is going near to the end.
Time to build a jig. See the how to if you want to diy. There are a few you can buy online if you're lazy
Sent from my SGH-I897 using xda app-developers app
It's quicker and easier to just do it yourself, there's a no solder method on the forums here.
I'm trying
yes.. I'm following this 2 solderless threads jig without cutting usb cord and jig with cutting usb cord
but no luck yet, have to identify the problem. is there any suggestions about these methods or any other?
What problem? Only follow 1 of the guides, they're different, hence why there's 2.

Categories

Resources