I did a factory reset from the settings menu and and while it was reseting it randomly turned off. I thought that means it was done and I needed to start it back up. After I tried to press the power button I get no response. A complete black screen and not even the M logo. I tried charging it overnight and it still has a black screen. Any help please?
Edit: Apprently it works now right after posting on XDA...
Yesterday I put it on charging when I went to sleep. Today morning I tried to ON the tab and it just boots to a blank screen and stays like that. My Nook HD+ has stock rom and only modifications was one which allow third pary apps to install. I don't know what to do, please help me...
[Edit] It won't even boot to the CWM backup SD card. When long press power button screen's truning off and long pressing power button again makes the blank screen to appear. Once it reached till the nook 99% screen and then it became blank, twice the very first nook boot screen appeared and then it went blank... and now after several trying only blank screen appears.
After a lot of tries, it finally resetted to factory settings. But a couple of minutes after loging in to my account, blank black screen again appeared and it stays like that. I turned the device off and turned it on after some time, it again booted to the black blank screen for a couple of times. I decided to leave the device on like that. After about 5-7 minutes staying idle, the device booted to the nook os automatically. But the blank screen process repeated. I tried restoring my stock backup using CWM, but the blank screen process is happening in CWM too after some time.... After a lot of tries, I finally restored my stock backup using CWM. But the problem is still there.... Anybody know what is happening? What I do now?
Any advice is really appreciated... thanks.
Any of the experts here know, why this is happening and what to do?
mashac said:
Any of the experts here know, why this is happening and what to do?
Click to expand...
Click to collapse
It sounds like a defective device to me. Time for a warranty exchange.
Sent from my BN NookHD+ using xda premium
Hello guys, I am in need of some serious help, but please excuse me if I ask too many newbie questions.
I was running SlimROM on my Nook HD+ (I came back from running CM10.1>CarbonROM>SlimROM>CM10.1>SlimROM) and browsing the web late a couple of nights ago when the nook turned itself off. It rebooted itself and got stuck in the CM spinning logo for about 5 minutes. Since this had never happened to me before, i hard reset(held on the power button for long to force a restart) and now it is stuck on the Nook logo until the battery is fully drained. I tried rebooting it many times, while trying to force it into CWM recovery by pressing the vol down/vol down+home while turning it on. No effect, it just keeps showing the Nook logo.
So I brought out my SD card using which I had first installed CWM and CM upon receiving my new Nook HD+ and tried to boot from it. It starts up, shows the Nook logo, then goes on to Cynoboot Universal Bootloader logo for a few seconds, dims, then lights up again and gets stuck there. It then shuts down the Nook itself after a couple of minutes or so.
I brought this tablet with myself to Afghanistan, where I am currently stationed, so I cannot even go into a B&N store until my next R&R (not that I want to take an EMMC flashed Nook to B&N anyway). Please advise.
Am I going to have to buy a new tablet?
Thankyou very much in advance.
chr0 said:
Hello guys, I am in need of some serious help, but please excuse me if I ask too many newbie questions.
I was running SlimROM on my Nook HD+ (I came back from running CM10.1>CarbonROM>SlimROM>CM10.1>SlimROM) and browsing the web late a couple of nights ago when the nook turned itself off. It rebooted itself and got stuck in the CM spinning logo for about 5 minutes. Since this had never happened to me before, i hard reset(held on the power button for long to force a restart) and now it is stuck on the Nook logo until the battery is fully drained. I tried rebooting it many times, while trying to force it into CWM recovery by pressing the vol down/vol down+home while turning it on. No effect, it just keeps showing the Nook logo.
So I brought out my SD card using which I had first installed CWM and CM upon receiving my new Nook HD+ and tried to boot from it. It starts up, shows the Nook logo, then goes on to Cynoboot Universal Bootloader logo for a few seconds, dims, then lights up again and gets stuck there. It then shuts down the Nook itself after a couple of minutes or so.
I brought this tablet with myself to Afghanistan, where I am currently stationed, so I cannot even go into a B&N store until my next R&R (not that I want to take an EMMC flashed Nook to B&N anyway). Please advise.
Am I going to have to buy a new tablet?
Thankyou very much in advance.
Click to expand...
Click to collapse
I thought the normal way to get to recovery is to power up with the nook button held down? - have you tried that?
jazzy2fives said:
I thought the normal way to get to recovery is to power up with the nook button held down? - have you tried that?
Click to expand...
Click to collapse
Yes, i tried that first, then the vol down+power and then vol down+nook+power. I guess I was desperate, and searched everything remotely similar to the issue.
jazzy2fives said:
I thought the normal way to get to recovery is to power up with the nook button held down? - have you tried that?
Click to expand...
Click to collapse
That is not the way to boot to recovery. You boot to recovery from power off by holding BOTH power and n for like 5-8 seconds, releasing power first followed a few seconds later by releasing n. But be careful how long you hold power, if you hold it too long it will power back off.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
That is not the way to boot to recovery. You boot to recovery from power off by holding BOTH power and n for like 5-8 seconds, releasing power first followed a few seconds later by releasing n. But be careful how long you hold power, if you hold it too long it will power back off.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Yes sir, that's what I meant I tried. I have (successfully) force booted my way into recovery a couple of times before, but this time it is just stuck on the Nook logo (or cyanoboot logo if I power up with the CWM/CM SD inserted)
Wow. So many views on the post.
Guess the tablet is done for then.
Anyway, thankyou devs of CWM, CM and other ROMs who made my short journey with my first Android so very informative.
Would love to come back here when I buy my new tablet. I think it will be the new Galaxy note 10.1. Or the Nexus 10.
'Till then.
-
Chr0
I'm a real newbie to this stuff, so I may be talking rubbish and I'm not familiar with the ROM you were using, but is it possible you're emmc is damaged, for instance by trim. I know there are some people on the board running of special SDCard only roms, and some talk of possible ways to recover damaged emmc.
The reason I say this is it seems stuff is working up to a point, I think even the normal bootable SDCards and recovery partition probably try to mount some things from the emmc, and I wonder if this is where it's freezing up.
Hi all im really looking for some help before i give in and send my for repair. I have only had it a week and earlier today it suddenly stopped working but just before it did it said the xperia home has stopped and then the phone went off and wouldnt turn back on. When i finally managed to get it to come back on i get just the sony logo then a blank black screen with a backlight on and nothing else this then loops back into the sony logo then the blank screen. Iv tried charging the phone. Connecting to a computer does not work as it cant recognise the device. (otherwise i could have reset the phone). Iv tried volume up and power get the three vibrations then it ends up doing the same thing when i switch back on. Then volume down and power while plugged into computer but the green light comes on for a brief second then goes again. Im really baffled as to whats happened and any advice would be really appreciated.
Thanks in advance, sorry for the long post
Hi all
Wondering if someone can help please. All of a sudden yesterday the screen wasn't working on my phone, but it was still streaming music via Bluetooth to my car.
Now I can hold the power button for ages and it vibrates, and sometimes gets a white Huawei logo on the screen, but it won't show anything on the screen.
Any ideas how I can force it to boot up please or do you think it's broken?
cable_guy said:
Hi all
Wondering if someone can help please. All of a sudden yesterday the screen wasn't working on my phone, but it was still streaming music via Bluetooth to my car.
Now I can hold the power button for ages and it vibrates, and sometimes gets a white Huawei logo on the screen, but it won't show anything on the screen.
Any ideas how I can force it to boot up please or do you think it's broken?
Click to expand...
Click to collapse
Follow the guide in my sig.
Don't forget to read dude.