Database Develop

[Q] Bell i9000m Official 2.2 Froyo Upgrade Question(s)

So apparently the official 2.2 Froyo is rolling out. I haven't checked yet but I will when I get home. I have some newb questions.
I got my phone and haven't touched a thing to it. Just added lots of apps. No root. No lag fix. Nothing.
My question is, if I upgrade this officially via Kies:
1) Do I lose my contacts / stuff ?
2) Do I lose my apps ?
I heard people saying that once you upgrade to do a hard reset of the phone -- why ? What happens if you don't ?
With this in mind, how and what is the best way to back up all my apps ? I haven't rooted but i DO have Titanium Back up. Would Z4root work for i9000m ? can anyone confirm ?

Funkadelick said:
So apparently the official 2.2 Froyo is rolling out. I haven't checked yet but I will when I get home. I have some newb questions.
I got my phone and haven't touched a thing to it. Just added lots of apps. No root. No lag fix. Nothing.
My question is, if I upgrade this officially via Kies:
1) Do I lose my contacts / stuff ?
2) Do I lose my apps ?
I heard people saying that once you upgrade to do a hard reset of the phone -- why ? What happens if you don't ?
With this in mind, how and what is the best way to back up all my apps ? I haven't rooted but i DO have Titanium Back up. Would Z4root work for i9000m ? can anyone confirm ?
Click to expand...
Click to collapse
1) no
2) no
3) hard resets are only if you experience a ton of lag while operating the phone
4) z4 does not work on jk4

BlackDino said:
1) no
2) no
3) hard resets are only if you experience a ton of lag while operating the phone
4) z4 does not work on jk4
Click to expand...
Click to collapse
how do you root jk4 then ? 2.1 eclair on bell i9000m

1. Phone is currently rooted. Do I have to unroot it before applying the firmware upgrade from Kies?
2. Do I have to perform a factory reset before applying the firmware upgrade?

Why is this stupid update corrupting internal SD's left and right? Bell better get me a new phone! Cause this one is bricked(I think) it goes up til "S" logo and then nothing but blank screen. If I touch the button, they light up but still nothin on the screen.
I should have gotten a different phone to begin with, but too bad Canada doesn't have all the good phones US has like D2 DX HTC Evo etc. Going up to Bell tomorrow for an exchange.

rajesh26e4u said:
Why is this stupid update corrupting internal SD's left and right? Bell better get me a new phone! Cause this one is bricked(I think) it goes up til "S" logo and then nothing but blank screen. If I touch the button, they light up but still nothin on the screen.
I should have gotten a different phone to begin with, but too bad Canada doesn't have all the good phones US has like D2 DX HTC Evo etc. Going up to Bell tomorrow for an exchange.
Click to expand...
Click to collapse
A lot of people have been complaining that their SD cards have been screwed. Luckily mine went through without any problems and hasn't given me any trouble so far.
Froyo is insane tho, before the phone used to lag a bit, now the moment i touch it it opens. No need for lag fix in my opinion, everything works blazing fast as is.
One thing to watch out for is the WIFI. It was working normally at the beginning but after 3 hours it just disconnected for no apparent reason and has trouble connecting back.
Good luck

rajesh26e4u said:
Why is this stupid update corrupting internal SD's left and right? Bell better get me a new phone! Cause this one is bricked(I think) it goes up til "S" logo and then nothing but blank screen. If I touch the button, they light up but still nothin on the screen.
I should have gotten a different phone to begin with, but too bad Canada doesn't have all the good phones US has like D2 DX HTC Evo etc. Going up to Bell tomorrow for an exchange.
Click to expand...
Click to collapse
Don't panic yet...
Try this
Volume UP/Power/Home(middle button)
Factory reset/Wipe

urfase said:
1. Phone is currently rooted. Do I have to unroot it before applying the firmware upgrade from Kies?
2. Do I have to perform a factory reset before applying the firmware upgrade?
Click to expand...
Click to collapse
1. NO
2. Good idea to factory reset before and after. Can't hurt and any noncompatible
programs and data will be gone.

Videonut said:
1. NO
2. Good idea to factory reset before and after. Can't hurt and any noncompatible
programs and data will be gone.
Click to expand...
Click to collapse
1) but will it erase root upon upgrading?

bimmerboii said:
1) but will it erase root upon upgrading?
Click to expand...
Click to collapse
Yep, but for optimised result, this is a must do!
You can probably have it work without doing a factory reset, but you can encounter weird behavior, bugs and stuff!
Anyway, you might end up doing it anyway to solve the firts boot issue

I'm one of the users who upgraded to Bell Froyo (from stock FW with root and lagfix - undid the lagfix before upgrading) and then encountered the broken internal SD card issue. I ran Volume UP/Power/Home(middle button) to reformat everything and it is up again. Inside the OS, I ran the internal factory reset again. So far so good. *crossing fingers*

I updated mine last night. However I've had major problems since. Initially it would just freeze up randomly and require removing the battery to get it back up and running.
Today I decide to reset it to defaults which seemed to go fine, although shortly after getting it all setup again, some Samsung app of sorts came up with an error and had to be forcefully closed. Then I was left with a black screen and only the notification bar.
Powered off the phone and went to turn it back on, and now it just loops through the Samsung GT i9000 screen (white writing). Not even the colourful S logo comes up.
I'm able to get it into Download Mode but not Recovery Mode. I'll have to do some reading about this Odin stuff tonight. Hopefully I can revive it, otherwise I guess I'll had to send it in for repairs. No idea if Virgin Mobile repairs will go through Bell or if I take it to them directly.
This is my first Android phone and I've only had it for just over a week. I thought I was making a good decision, but now I see it has quite a defect with the internal SD card failing.

Slow after upgrade
I upgrade my phone last night ( as per bell and Samsung) It is now slower than before. Quadrant Standard has it under 900.
Any ideas how to fix it?

bimmerboii said:
1) but will it erase root upon upgrading?
Click to expand...
Click to collapse
Just use SuperOneClick after you upgrade to Froyo, I've tested and have root on JK4
http://forum.xda-developers.com/showthread.php?t=803682

I have an unlocked phone from Bell that I already upgraded to the international (or European?) JPP/JPO 2.2, what is the best way to downgrade or restore back to default firmware before using Kies to get the official update? Does factory reset restore stock firmware?

I upgraded to official Bell froyo last night ..thn rooted.But how can i Unlock now? i tried using SGS unlock app it says no unlock codes found?? Please help

God damn samsung and bell!
it seems like they're giving defected phones to their costumers!
I have the corrupted sd card too, took it to guarantee now it takes more than 1 month to fix this!
this is f-ing xmas for god's sake. i want my phone

Same problem here!
I do have 2 good samsung galaxy s vibrants from Bell, however when i got the second one i upgraded to Froyo and now i cant unlock it because i cant read the stupid file inside the phone so,
How can i go back to my previous JH2 baseband?
Or
How can i unlock JK4?
I did my unlock on the other Galaxy using the script you donwload from somewhere in this website and then connecting the phone via usb cable with debugging on and mounting sd but with froyo i dont even know where my USB settings went!!!
Thanks for your help, greatly appreciated.

ciudadbonita said:
I do have 2 good samsung galaxy s vibrants from Bell, however when i got the second one i upgraded to Froyo and now i cant unlock it because i cant read the stupid file inside the phone so,
How can i go back to my previous JH2 baseband?
Or
How can i unlock JK4?
I did my unlock on the other Galaxy using the script you donwload from somewhere in this website and then connecting the phone via usb cable with debugging on and mounting sd but with froyo i dont even know where my USB settings went!!!
Thanks for your help, greatly appreciated.
Click to expand...
Click to collapse
Have you found any solution yet?? I am thinkin to flash back orignal samsung firmware using Odin n then unlock..atleast i will be able to use the phone then

Videonut said:
Don't panic yet...
Try this
Volume UP/Power/Home(middle button)
Factory reset/Wipe
Click to expand...
Click to collapse
what if after this, it's still stuck after the s logo boot up?
does this mean i have a broken internal sd?

[Q] Bricked NTT DoCoMo Japanese Tab

Ok here goes... This is my first thread post here but I am in serious need of help.
I have searched and searched the forums for a hopeful answer but I have found it difficult to find the answer I seek.
So here is the story:
Bought a GT second hand from Akihabara in Japan which was locked to NTT DoCoMo. I was using it as a WIFI only Tab and all was wonderful till my IT brain decided it could be better and I began to tinker.
I had been looking around for a way to make my Australian Virgin Mobile SIM to work on the tab and found a lot of good answers but nothing that would make it work.
I then had the brilliant idea to change the firmware with a European firmware so I could get all the features enabled from a fresh start. Which is where it all went wrong.
I first tried to flash the tab using Odin 1.7 with the P1000XXJK5 euro firmware from samfirmware.com
This failed and left my tab with the picture of a phone and a pc with a dotted line and in between them an exclamation point in a triangle.
After a lot of fiddling (I dont remember what I did but I managed to get rid of that screen had something to do with retrying the flash and it was very late last night at this point) I managed to try again but Odin just kept failing on running the updated firmware.
I then decided that it would be a good idea to run the Rotohammer firmware by following the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=895827&highlight=sc-01c
This is where I once again received errors from Odin and now my tab is somewhat bricked.
I tried reflashing but same errors every time. (I currently dont have the errors from Odin but I will update my post when I get home)
I can still get to the downloading screen (Yellow triangle with the Android digging) so I am hopeful all is not lost.
So now you have heard my sob story I will ask two questions....
1. Has anyone actually successfully flashed a Japanese model Tab?
2. My only thought/hope at the moment can anyone direct me to an original NTT DoCoMo firmware so I can at least go back to having WIFI only Tab?
Thanks in advance if you can help
Alex

Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz

I am searching the an original NTT DoCoMo firmware.

Electroboy said:
Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz
Click to expand...
Click to collapse
Oz the model is SC-01C it has a build date of 2010/12
I was thinking considering I can get into the build/download screen maybe trying an emergency firmware recovery using Kies.

Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<

I'm going to give the original firmware a go today at lunch time and I will let you know how I go. Thanks anyways for the link if all goes well I'll look at possibly trying the the koxudaxi kernel.
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
UPDATE: Still getting the same problems using heimdall to flash the tab. Any suggestions as to what I could do next?

Recovering a Docomo Tab
I'm currently running Overcome v1.1.3 ROM and richardtrip's V15 kernel on my SC-01C.
acont said:
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
Click to expand...
Click to collapse
You're getting this error from Heimdall, right? Have you tried Odin 1.7?
Here's how I recovered my Tab using Odin:
1. Following the instructions in http://forum.xda-developers.com/showthread.php?t=895827, specify the P1_add_hidden.pit in the PIT button and select Re-Partition.
2. Specify the stock Docomo ROM when pressing the PDA button.
3. Ignore the Phone and CSC buttons, as the stock ROM already contain these items.
You should be able to restore your Tab to stock settings using this procedure.
If this doesn't work, you might want to check if the USB connection to your PC is ok, and if everything necessary to run Odin is installed on your PC.

Bugger!
Well thanks for your help all of you but I think I have just made matters worse.
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
I can't boot into download mode and I can hold down the power button till I turn blue in the face... So as Bones would say "It's dead Jim"
Unless any of you have anything else I could try as a last ditch shot I might just have to ship it back to Japan and get them to fix it or maybe try Samsung here in Oz.
Serves me right
Thanks again.

acont said:
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Click to expand...
Click to collapse
What exactly happened?
The SC01COMJK2 firmware does not contain protected bootloaders, by the way.
acont said:
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
Click to expand...
Click to collapse
I've heard about this happening when the battery runs out. Try connecting the Tab to your PC (not your AC adapter) and let it trickle-charge for an hour or so. If successful, you should see the download screen.

fury1sog unfortunately that didnt work
spoke to the samsung repairers here in Aus and they said they can take a look at it for me hopefully bring life back into my unit and then I will never touch it again

Any thoughts?
Hopefully this post is still being looked at but has anyone got any ideas as to what I could do before I fork out $374 to my tab repaired by Samsung Australia?
According to the repair guys its a faulty board (not an idiot that tried to flash it) and needs to be replaced. Not sure if this is worth my trouble considering I could buy a brand new tab for $599.
There is a positive out of this, the MB will be an Australian MB and I will have a working "Australian" tab instead of the Japanese version.
Considering the unfortunate tragedy in Japan I am not sure I should try and get my friend in Japan to fix it for me.
Thoughts anyone?

I know someone who can unlock it, I have mine unlocked by them.
I was afraid of flashing it myself so I paid to have it unlocked, cost was $20.
I think you better go for the MB replacement, it's cheaper.

For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.

zetsurin said:
Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<
Click to expand...
Click to collapse
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.

also used heimdall. starts downloading. but stuck almost at the end of the tab's progress bar.
argh...

me too ! samsung galaxy tab m180 Korean .... huhu

What ROM is best for a SC-01C?
Hi Guys
I picked up a 2nd hand SC-01C from Yahoo Auction, and am wondering what the best ROM to use with it is...
Looks like this guy has got an Overcome ROM on it OK, (http://chaki-ramone.blogspot.com/2011/06/galaxytabsc-01cgingerbreadromovercome.html), so I wonder if the latest version (http://forum.xda-developers.com/showthread.php?t=1205990) will work OK - anyone tried? (is the SC-01C a GSM-based model??)
I'm not going to use a SIM with it, so I'm not bothered about unlocking - but just want it rooted & want a good balance between speed & battery life. If you were going from scratch with an SC-01C, what would you do? Any suggestions greatfully received!
Thanks in advance?
PS - I'm an iPhone / iPad / Ideos 8150 / Notion Ink Adam owner, all jailbroken / rooted. So I'm not scared about rooting per-se, just worried about trying something that will not work because of anything docomo has done to the Tab!

Acont you could be coma bricked try pluginging it into THE MAINS for at least 4 hours if nothing come up your hard bricked.
Sent from my GT-P1000 using XDA Premium App

zetsurin said:
For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.
Click to expand...
Click to collapse
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..

huylang280285 said:
me too ! samsung galaxy tab m180 Korean .... huhu
Click to expand...
Click to collapse
unbricking M180 is done long time ago
Here is a video for you
http://www.ort-jtag.com/blog/?e=15
udhtari said:
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..
Click to expand...
Click to collapse
What about this P1000R , what is special or different ?
I know P1000L was for south american edition !
lemmy_0 said:
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.
Click to expand...
Click to collapse
Docomo solution is very soon !
That TAB need JTAGging thats the only way ..
I have the good and dead device in hand , we will release for ORT-JTAG probably this week ..
Best Regards
Oz.

So... i bricked my Galaxy Tab... HELP!!!

So I was retarded and followed the instructions (or started to) on androidadvices dot com/how-to-update-samsung-galaxy-tab-to-stable-gingerbread-2-3-3-firmware
My Tablet will not boot past the T-Mobile logo.......... they are being assholes and telling me i need to deal with samsung ......... who told me it would be 6-8 weeks for a replacement........ is there ANYONE out there that can help me with just resetting it???

If you can get to the T_Mobile logo, you probably have a working bootloader and that mean you just need to flash the correct firmware for you device.
In short words, go to samfirmware.com and download the right firmware for your tablet model.
Once you have the firmware, flash them to your tablet with 'odin' (flash software, that you can also get in the mentioned website).
This should solve the problem.

If this works I will love you.

So i am obviously more retarded than I thought pedrohfsd ........ I have an SGH-T849 and i cannot FIND the firmware on that site..... seriously? UGH

pm me i'll tell you what to do , with th stock firmware for Tmobile , i helped someone before 2days he had same tab with you ) and same problem

pedrohfsd said:
If you can get to the T_Mobile logo, you probably have a working bootloader and that mean you just need to flash the correct firmware for you device.
In short words, go to samfirmware.com and download the right firmware for your tablet model.
Once you have the firmware, flash them to your tablet with 'odin' (flash software, that you can also get in the mentioned website).
This should solve the problem.
Click to expand...
Click to collapse
You sir, are brilliant.
I wasn't able to locate the firmware on the samfirmware.com but I DID find it on XDA from another user. Put phone into download mode... waited till the little box in Odin turned yellow and loaded that badboy on there. After about 5 minutes it was back into the 2.2 OS again. The only problem that I had was with programs that had been installed before and loaded at boot (Just had to uninstall / reinstall) But for the most part its back to the way it was.
Thanks so much for your help!
You too Kosh, as I am sure you were going to walk me through exactly what I fumbled through on my own (I'm lucky I didn't blow anything up haha)
NO more attempts to get 2.3 on this badboy!
Thanks again all <3

I'm glad to hear that KalKainen, the first time i soft bricked my phone i got desperate too.
But after some weeks i saw the inumerous progressions that people develop in custom roms here in xda, and flashed the whole thing again =P.

pedrohfsd said:
I'm glad to hear that KalKainen, the first time i soft bricked my phone i got desperate too.
But after some weeks i saw the inumerous progressions that people develop in custom roms here in xda, and flashed the whole thing again =P.
Click to expand...
Click to collapse
Amen man..... desprate is about right.. haha... now if i could only figure out why i have to CONSTANTLY reboot it in order to restore network service (Even though I have 3g and full bars... no text messages send / come in and programs that use data error out... ) I would be happy. This has been happening for the last 4 months badly enough that I can have to reset it 10 times in a 2 hour period >.< I cant even put it into flight mode.... but after I TRY putting it into flight mode and then reboot it... it comes BACK in flight mode.... I hoped the reinstall of the firmware would fix it.. but alas..... still plagued. AT LEAST IT WORKS THOUGH!!

[Q] Removed touch wiz woops!

Morning all,
I apologise if this is in the wrong section but I am new to the forum and in a bit of pickle.
Around a week ago I rooted my lovely new note 3 to hopefully one day install some nice new ROM to get rid of the horrid touch wiz and actually see the full potential of the phones power. However, for some silly reason while I was using titanium backup on my phone I thought it would be a good idea to uninstall touch wiz thinking it would magically go back to basic android however it didn't. It is completely broken now, woops. The first issue I had was it would boot up and stick to the Samsung logo and just glow so I thought it would be an idea to install stock ROM via ODIN to try and revert it back to normal. Once I downloaded the correct stock ROM it was uploading through download mode however at the last minute it failed with a ext4 error which I think it means it's bricked? Not sure, completely new to this. I am now a bit stuck as I am not 100% sure what to do next.
The phone will only boot into either the firmware upgrade has encountered an issue, basically Odin mode or download mode. I have tried recovering it through kies however it cant connect to it. It knows it is there as it will start searching for it when it's connected however says it can't find it.
My phone is a note 3 SN SN-9005. The system status is custom, reactivation lock is off, Knox kernel lock 0x0, Knox warranty void 0x1 and write protection is enabled.
Obviously I would like to get the phone back to normal, I don't care if it has to be completely wiped and brought back to normal I would like it to just work. I've been an complete idiot and fiddled with something I'm not 100% sure on and I would like to not have a 600 quid paper weight hehe.
I will greatly appreciate any help or feedback.

You won't get the best feedback for a 9005 model here. We are the 900A version stuck on AT&T. Yes, however, we have plenty of intelligent people here. It's best to post your question here in the main Samsung Galaxy Note 3 thread next time:
http://forum.xda-developers.com/galaxy-note-3/help
Next, since you've voided your warranty as Knox being 0x1 - you're pretty much screwed for a refund or replacement based on PRESENT development from what I have read all over the AT&T threads. Understand this. Now, that being said, did you install a custom recovery or have your original recovery?
Here's my input/help. Forget about ODIN. You don't need that if all you did was remove your touch wiz.
Take out your battery, put it back in and hold VOLUME UP, POWER, and HOME together until you reach a recovery. Then if it's the stock recovery, wipe your cache partition, then wipe data/factory reset. Then reboot and you're good back to starting over. Check with a rooting application to see if you still have or not. If not, then obviously reroot
Also, don't ever do anything like that again without thinking what it could do, lol . Always tread carefully whenever you are new to something. Just my two cents for you. If you came here to root and learn it, don't be afraid to ask questions about applications and expanding your knowledge. No one will ignore you if you ask a simple question in the right manner/thread.
Good luck!

Thank you for the feedback. I have defiantly learnt from my mistake with this one. I have usually been lucky diving into things blindly hehe. I have tried to put it into recovery mode however it just vibrates like it should and then comes back up to firmware upgrade issue with the two computer screens an a attention sign in the middle. Is there anyway to get recovery mode back.

apdnote said:
Thank you for the feedback. I have defiantly learnt from my mistake with this one. I have usually been lucky diving into things blindly hehe. I have tried to put it into recovery mode however it just vibrates like it should and then comes back up to firmware upgrade issue with the two computer screens an a attention sign in the middle. Is there anyway to get recovery mode back.
Click to expand...
Click to collapse
Wish you had come here when you deleted touchwiz only instead of playing with Odin. Looks like you messed it up even further and have to now use Odin to reinstall your firmware. I'm about to go to sleep, but do this.
1) Take out battery and put it back in. Then press and hold VOLUME DOWN + HOME + POWER at the same time until you reach DOWNLOAD MODE.
2) Follow the steps here and use your odin or latest odin (shouldn't matter):
http://www.androidrootz.com/2013/10/how-to-unrootunbrick-galaxy-note-3.html
Oh, and google is your friend. It's how I learned things over the years...READING, then tinkering....you're welcome .

I wish I did as well. I will try this when I get back from uni this evening and post back results.
Thank you again.

apdnote said:
I wish I did as well. I will try this when I get back from uni this evening and post back results.
Thank you again.
Click to expand...
Click to collapse
You're very welcome, bro.

opasha said:
You're very welcome, bro.
Click to expand...
Click to collapse
I used what you have said to do and downloaded the correct firmware however when I try and install it via odin in download mode I get a FAIL(SIZE!) message at the end. Its not an ext4 error anymore but im worried at what is going on now. I have tried searching it up on google however nothing has come up. Looks like ive completely broken it... ='(

apdnote said:
I used what you have said to do and downloaded the correct firmware however when I try and install it via odin in download mode I get a FAIL(SIZE!) message at the end. Its not an ext4 error anymore but im worried at what is going on now. I have tried searching it up on google however nothing has come up. Looks like ive completely broken it... ='(
Click to expand...
Click to collapse
You have the 9005 right? I think you have the wrong file to odin. What is the exact model number of your phone and where are you located in the world? (reason I ask is there are different regions to choose from)

agent929 said:
You have the 9005 right? I think you have the wrong file to odin. What is the exact model number of your phone and where are you located in the world? (reason I ask is there are different regions to choose from)
Click to expand...
Click to collapse
SSN: SM-N9005GSMH
S/N: RF1D96B6ELB
United Kingdom Vodafone.
Im sure I downloaded the 9005 for samsung in the uk but I wil try again from a different site that specficly says what country and code.
If not would you be able to post me a link to the exact one?
Many thanks

Thank you so much everyone for your input. I hunted out the correct EU snapdragon firmware and booted it on, emptied the cache and restored to factory settings and its finally running! Only took 2 days hehe but at least its working. Thanks again everyone

Good to hear!

apdnote said:
Thank you so much everyone for your input. I hunted out the correct EU snapdragon firmware and booted it on, emptied the cache and restored to factory settings and its finally running! Only took 2 days hehe but at least its working. Thanks again everyone
Click to expand...
Click to collapse
Your welcome, don't forget to hit the thanks button for anyone that helped you!

apdnote said:
Thank you so much everyone for your input. I hunted out the correct EU snapdragon firmware and booted it on, emptied the cache and restored to factory settings and its finally running! Only took 2 days hehe but at least its working. Thanks again everyone
Click to expand...
Click to collapse
Hi, I am using same SSN. Can you please confirm the working rom download URL? Appreciate your help.
Thank you.

*URGENT* Huge Problem with my S3 Mini

Hey XDA guys,
I've got an I8190N
I've got a pretty big problems and I need the help of your big brains.
Well a long time ago (17th September 2013) I posted a thread about a problem with my phone, when I booted up, it had this screen:
*Image should either be here or in the attached thumbnails*
So about 3 weeks ago from today I was trying to install a new CM11 ROM update from Maclaw but after I put the zip on my sd card and booted into TWRP recovery (2.6.3.0, just in case it needs mentioning), the phone shut off in the middle of the installation, I thought it was just the usual bugs I get whilst flashing ROMs so I tried to turn it on and it wouldn't turn on.
After a couple of attempts I finally realised that it's able to go into download mode only, I think that means it's soft-bricked right?
So I kept trying to re-install the stock ROM (unroot, unbrick etc) through odin but it kept failing.
I sent the phone to repairs and they wouldn't repair it (because it's rooted obviously, I thought maybe they wouldn't know but of course they did).
I obviously can't get a replacement and start over again because the warranty is void now that I've rooted it
So now they've sent it back and it's currently a paper weight that can go into download mode and refuses to install stock ROMs through Odin.
What do I do? I really need help guys (I don't need to worry about backups because I always backup)
Please answer soon, otherwise I'll be without a phone and my phone company will keep charging me for my contract eventhough I'm not using the phone.
Thanks in advance for any help given

LordwinOfficial said:
Hey XDA guys,
I've got an I8190N
I've got a pretty big problems and I need the help of your big brains.
Well a long time ago (17th September 2013) I posted a thread about a problem with my phone, when I booted up, it had this screen:
*Image should either be here or in the attached thumbnails*
So about 3 weeks ago from today I was trying to install a new CM11 ROM update from Maclaw but after I put the zip on my sd card and booted into TWRP recovery (2.6.3.0, just in case it needs mentioning), the phone shut off in the middle of the installation, I thought it was just the usual bugs I get whilst flashing ROMs so I tried to turn it on and it wouldn't turn on.
After a couple of attempts I finally realised that it's able to go into download mode only, I think that means it's soft-bricked right?
So I kept trying to re-install the stock ROM (unroot, unbrick etc) through odin but it kept failing.
I sent the phone to repairs and they wouldn't repair it (because it's rooted obviously, I thought maybe they wouldn't know but of course they did).
I obviously can't get a replacement and start over again because the warranty is void now that I've rooted it
So now they've sent it back and it's currently a paper weight that can go into download mode and refuses to install stock ROMs through Odin.
What do I do? I really need help guys (I don't need to worry about backups because I always backup)
Please answer soon, otherwise I'll be without a phone and my phone company will keep charging me for my contract eventhough I'm not using the phone.
Thanks in advance for any help given
Click to expand...
Click to collapse
I believe that kies has emergency firmware that you can use to revive your phone? Try that. What does it say when it fails in odin?

hello,
so you can still go into download modus?
try the latest recovery (2.7 if i'm correct...) and flash with odin.
then try to boot into recovery and reflash the latest mclaw (or any other) non stock firmware.
think about it that you have to unzip the odin firmware package you download from maclaws site ( i forgot it and got messing around 2hours ago.... also staring at the erro in odin and thinking W*F is happening :cyclops: but then i realized i need to unzip the package...
realy good luck.....

Hi
Odin flash pit file

It just says the big black FAIL in the red background where it's supposed to be PASS in the green background

Could you guys give me download links to the PIT files, TWRP and the firmwares so I could get the right ones please?
Thanks

LOOK HERE
(i8190_goldenxx.zip) is the pitfile for I8190 only and i8190N_goldenxx.zip for I8190N version
BUT: these are NO flashable files - extract them and choose xxx.pit in Odin.
MJ

Could you give me a link to the pit file please

Do you have a link to the firmware I should use because tys0n gave me one before which was the service firmware (like 1.29gb) but it wouldn't work for this problem

LordwinOfficial said:
Do you have a link to the firmware I should use because tys0n gave me one before which was the service firmware (like 1.29gb) but it wouldn't work for this problem
Click to expand...
Click to collapse
come on boy, it´s really easy to find it, but ok, it´s friday and weekend comes ...
Firmware
Look at the attached files in that post
to flash a pre-rooted, deodexed and zipaligned ROM try this one
MJ

LordwinOfficial said:
Hey XDA guys,
I've got an I8190N
I've got a pretty big problems and I need the help of your big brains.
Well a long time ago (17th September 2013) I posted a thread about a problem with my phone, when I booted up, it had this screen:
*Image should either be here or in the attached thumbnails*
So about 3 weeks ago from today I was trying to install a new CM11 ROM update from Maclaw but after I put the zip on my sd card and booted into TWRP recovery (2.6.3.0, just in case it needs mentioning), the phone shut off in the middle of the installation, I thought it was just the usual bugs I get whilst flashing ROMs so I tried to turn it on and it wouldn't turn on.
After a couple of attempts I finally realised that it's able to go into download mode only, I think that means it's soft-bricked right?
So I kept trying to re-install the stock ROM (unroot, unbrick etc) through odin but it kept failing.
I sent the phone to repairs and they wouldn't repair it (because it's rooted obviously, I thought maybe they wouldn't know but of course they did).
I obviously can't get a replacement and start over again because the warranty is void now that I've rooted it
So now they've sent it back and it's currently a paper weight that can go into download mode and refuses to install stock ROMs through Odin.
What do I do? I really need help guys (I don't need to worry about backups because I always backup)
Please answer soon, otherwise I'll be without a phone and my phone company will keep charging me for my contract eventhough I'm not using the phone.
Thanks in advance for any help given
Click to expand...
Click to collapse
You can go to recovery mode then by using three button combo
if its no working flash it from here using odin

Sorry, it's just not my day, phone breaks, gf breaks up with me because I didn't reply to her because my phone broke lol just ain't able to fix my phone myself like usual, I got a USB jig on the side just in case I need it if that'll be of any help? & Thanks for the links, appreciate the help

Fixed
Thanks guys, the phones fixed
Really appreciate all the help