Database Develop

Swype?

Can't find a version of swype that works at the moment? Anyone have the newest one?
Sent from my Nexus One

heya,
It's a closed beta at the moment, you need to register at their site (http://beta.swype.com/) and wait for an invite.
Alternately, each beta account can have up to two phones linked to it, so perhaps find somebody and see if you can piggy-back on.
I assume here that you're not asking for an APK though, right? *sigh*. Because that would be morally dubious (even though their infinite beta is annoying, I admit) and possibly illegal (since it's piracy). You can find them floating around the internet, but most of them are date-expired by now, possibly set your clock back?
Cheers,
Victor

Swype
Sorry I don't have an answer to the OP's question, but would like to continue the discussion.
I have a Nexus one with Swype. It works fine. been working fine since I was stock. I rooted, installed CM5 and Swype worked fine. I wiped, installed Enomthers, and Swype works fine. No problems there. (been using Enomthers ROM ever since. I like it better than CM... although I haven't tried 6.1)
Then... My wife got a MT3G original (no headphone jack). She signed up for the Swype beta, they accepted her and we installed Swype on her phone. It worked great. Then i rooted the MT3G and installed CM6. After installing CM6, Swype will not install. It says the application is registered to another device. Apparently this is a known issue with Swype. Even just uninstalling/reinstalling the app on the same phone/ROM can give this error. I have tried EVERYTHING suggested on the official Swype forum's, unofficial forum's, these forum's, forum forum's, etc. But i have never heard that you can have 2 devices registered to one Swype beta account. That may be the solution to mine and everyone else's problem.
Can you tell me how to accomplish this? I snooped around the Swype web page but could find anything about this. I'd be forever greatful if you can help.
PS: Does anyone understand the "application is registered to another device" error? If so can you explain how it knows it;s registered to another device? Is it the "swype installer" that gives the error or the "swype installer downloader" that gives the error? Shouldn't I be able to find the installer, change the phone info for the installer and have it realize it's actually registered for that device?

2.4.44 works fine

You cannot have one Swipe beta username and password used on two devices.
If you change roms, all you have to do is install the swipeinstaller.apk and login and it will download/ install. It will then register with swype. You cannot use a backup to install swype.apk
Just save the latest swypeinstaller.apk on your sdcard to use after Rom change.
I update or change Rom weekly and it works fine. I've been on beta since the beginning and have downloaded/installed/registered swype more than I can count.
Kevin
Sent from my Nexus One using XDA App

vwauditech said:
You cannot have one Swipe beta username and password used on two devices.
If you change roms, all you have to do is install the swipeinstaller.apk and login and it will download/ install. It will then register with swype. You cannot use a backup to install swype.apk
Just save the latest swypeinstaller.apk on your sdcard to use after Rom change.
I update or change Rom weekly and it works fine. I've been on beta since the beginning and have downloaded/installed/registered swype more than I can count.
Kevin
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
thanks for the info

sonok said:
Sorry I don't have an answer to the OP's question, but would like to continue the discussion.
I have a Nexus one with Swype. It works fine. been working fine since I was stock. I rooted, installed CM5 and Swype worked fine. I wiped, installed Enomthers, and Swype works fine. No problems there. (been using Enomthers ROM ever since. I like it better than CM... although I haven't tried 6.1)
Then... My wife got a MT3G original (no headphone jack). She signed up for the Swype beta, they accepted her and we installed Swype on her phone. It worked great. Then i rooted the MT3G and installed CM6. After installing CM6, Swype will not install. It says the application is registered to another device. Apparently this is a known issue with Swype. Even just uninstalling/reinstalling the app on the same phone/ROM can give this error. I have tried EVERYTHING suggested on the official Swype forum's, unofficial forum's, these forum's, forum forum's, etc. But i have never heard that you can have 2 devices registered to one Swype beta account. That may be the solution to mine and everyone else's problem.
Can you tell me how to accomplish this? I snooped around the Swype web page but could find anything about this. I'd be forever greatful if you can help.
PS: Does anyone understand the "application is registered to another device" error? If so can you explain how it knows it;s registered to another device? Is it the "swype installer" that gives the error or the "swype installer downloader" that gives the error? Shouldn't I be able to find the installer, change the phone info for the installer and have it realize it's actually registered for that device?
Click to expand...
Click to collapse
I had the same problem on my g1 with cm6.my guess is swype does not have a current version for the g1/mt3g on android 2.2
I managed to find an apk that did work however with some searching and did get it working
Sent from my Nexus One using XDA App

Pm sent .

[Q] Confusion over market...

I was running Cognition for a while, and found in market a "quickoffice for captivate". Installed it, used it, worked great.
Re-flashed to Continuum, which is an I9000 based ROM, and now a search for quickoffice for captivate gives me nothing.
Is there some setting in the market based on hardware ID or somethign that's blocking me finding this stuff? If so, what are my options? Some app that enables different markets, or changes some string somewhere for identifying the type of phone? Or what?
Thanks for any tips.

Download galaxy s tools and rub the market fix. (it blocks apps that are not "compatible" with your phone but the fix lets you see all ) hope this helps
Sent from my SAMSUNG-SGH-I897 using XDA App

Or you could go to the Cognition zip at system/app and copy the quickoffice.apk to your new rom.

or just use this apk

I tried the SGS tools market fix. Didn't change anything. I still can't find it. I'll try the apk. I just was hoping Ii wasn't missing out on other good stuff because of market limitations.

viny2cool said:
or just use this apk
Click to expand...
Click to collapse
So much for self reliance.
Caution swyping! Read at your own risk.

working swype (no link inside)

for those of you wanting to get swype working, if you google swype v2.6.48.12226 wsvga. click the first link, and look in post 53, you might find a way to get it working.
Just throwing this out there for those of you like me that wanted swype working with out all this coding nonsense.

Anyone brave enough to try the G2x Swype.apk? (See post #8)
http://forum.xda-developers.com/showthread.php?t=1051812
I would try it but don't want to mess up my 2.6 installation.

Paul22000 said:
Anyone brave enough to try the G2x Swype.apk? (See post #8)
http://forum.xda-developers.com/showthread.php?t=1051812
I would try it but don't want to mess up my 2.6 installation.
Click to expand...
Click to collapse
Just tested it. When installing the apk, it says "Application not installed" so it won't overwrite.
I uninstalled my version (2.6) and installed the new version (2.26 I think). Trying to get into the settings is an instant force close.
If anyone has any idea how to get the new version working, that would be welcome!

ive been getting some reports that the other links are no good, so heres a working one.
http://www.multiupload.com/UD4WWV9AQ7

boogerboy72 said:
ive been getting some reports that the other links are no good, so heres a working one.
http://www.multiupload.com/UD4WWV9AQ7
Click to expand...
Click to collapse
I cant seem to get it to run at all with phiremod 6.1? any suggestions?

installed, but I can't choose it, it doesn't appear in the Nookcolor Tools keyboard settings. Anybody know how?

btw I PAID for slidIT and it stopped working when I reflashed. they said I would need to pay for a new license every time I reflashed. they are thieves.

The version linked here is the one that works and I'm using it now. But still it's a rather old version. A number of terrible bugs that still exist in this version have already been fixed in the proper beta. I'd love it if there were a way to take the most recent beta and make that work on the Nook instead.
Sent from my Nook Color!

which OS are you running on your nook? what did you do to install it? it installs for me and I can select it in settings but only android keyboard comes up always.

iolinux333 said:
which OS are you running on your nook? what did you do to install it? it installs for me and I can select it in settings but only android keyboard comes up always.
Click to expand...
Click to collapse
Stock rooted 2.1, downloaded from the links above, installed with Astro, sucessfull

pretty good swype in this download. Works and it is better than stock or slideIT.

Finally figured it out you have to select it in settings AND then hit the little circle at the bottom left of the android keyboard and select it there too. Hooray for swype !!! When it finally gets to market I will buy it. I missed it so much ! BTW did I mention that the slideIT butholes are thieves?

I can't choose it in settings first :/
I think it can't be done in stock eclair..

VVM/My Verizon/Flash 10.2 all for GB (Updated 7/20)

OK, so I'm putting these up all in one place. This way you can stop asking for them in various threads. I'll add others as I discover need to add them.
My Verizon only works on VZW based ROMs.
6/27 Only works with PlainJane v3 AFAIK 6/27. GB ROMs will need to wait for a new base leak most likely.
6/30 Update - Older version works again. Download MyVerizon.apk for the older version that works on most newer ROMs. the com.vzw.hss.myverizon-1.apk will only work on the MR2 based ROMs.
VVM (visual voicemail) - Works on all versions of everything as far as I know. It also fixes the notification issues that people are having with voicemails on bamf roms. (your account must have it enabled for it to work, $3 a month.) - Apparently doesn't work with the Thunderstick ROM or CM7 1.2. Not sure what got changed in this most current build, but it definitely broke VVM. Thunderstick has some conflicting files baked in that break it.
Flash 10.2 edited for use with hulu.com as well. If you don't use it for hulu you won't see any difference. CM7 users rejoice? Just make sure you don't accidentally update it via market or you'll lose in browser flash video again and need to re-install this.
If you're having issues with a particular file, please post what ROM you're running. I'm trying to narrow down possible culprit ROMs.
If these files help you, don't forget about the "Thanks" button
Enjoy.
6/25 - Re-uploaded VVM.apk since a couple people seem to be having issues with it. I even deleted it off my phone and re-downloaded it via this attachment to check to make sure it went through properly. Since there are only the 2 people commenting that it didn't work out of 100+ downloads of the file, I'm going to assume that something happened on your end not mine (make sure you have unknown sources checked in your application settings and/or re-download?), but re-uploaded and tested nonetheless.
6/26 - Had to pull My Verizon due to an update today that breaks it for us. No current working version known for Thunderbolt.
6/27 - Ok, so the structure is there in the MR2 froyo update (plainjane v3) so I'm putting the current apk up. I need to figure out what i need to strip out of MR2 to make it work for other ROMs.
6/29 - Added Skype
6/30 - Changed Skype File location to Fyels.com for more bandwidth.
6/30 - Re-Posted the older My Verizon APK. No idea what VZW is up to on their end, but it no longer prompts for update locking us out. We'll see how long that lasts.
7/5 - Fixed Broken link for skype. Added bold text to netflix description to make it more obvious that it doesn't work on unrooted/froyo phones...
7/8 - Added Flash 10.2 (is also edited for use with hulu.com) for CM7 users.
7/20 - Removed netflix. It is now natively supported.
7/20 - Updated VVM to newer build version.
8/5 - Removed skype. Natively supported.

Good post. Good idea.

My Verizon app not working on my stock T- bolt. Pop up says not supported on this device. Did you mean all *rooted* Verizon based ROMs?

This is great, and I'ma let you finish.... but where's the Hulu+? #kanyeshrug

Dangerous Dave said:
My Verizon app not working on my stock T- bolt. Pop up says not supported on this device. Did you mean all *rooted* Verizon based ROMs?
Click to expand...
Click to collapse
You should be able to download it from the market if you're stock but the thread title says "for GB"
Sent from my ADR6400L using XDA Premium App

ipawd1 said:
This is great, and I'ma let you finish.... but where's the Hulu+? #kanyeshrug
Click to expand...
Click to collapse
Hulu plus is not currently supported on the tbolt (hence i won't put it in the op til then). If you want to mess with it, here's the apk. You can manage queues etc but you cannot play video. You will get a "device not supported yet" type error. You may be able to edit the build.prop to get it running by tricking it into thinking you have a different (supported) device but the idea to this thread is to not hack/edit things to get them working.

arcanexvi said:
You should be able to download it from the market if you're stock but the thread title says "for GB"
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
Not on the market for T-Bolt, and sorry...I missed the GB in the thread title (linked here from another thread).
At the risk of being accused of threadjacking, somebody saw my post and sent me a link for a MyVerizon app that works on a stock T-Bolt. (Thanks Zinsko!) So in case somebody makes the same mistake as me and wants the same answer, It's here
http://www.4shared.com/file/9XiNcQ-w/My_Verizon_Mobile.html.
Cheezy site, but the app works as it's supposed to.
[/threadjack]

Dangerous Dave said:
Not on the market for T-Bolt, and sorry...I missed the GB in the thread title (linked here from another thread).
At the risk of being accused of threadjacking, somebody saw my post and sent me a link for a MyVerizon app that works on a stock T-Bolt. (Thanks Zinsko!) So in case somebody makes the same mistake as me and wants the same answer, It's here
http://www.4shared.com/file/9XiNcQ-w/My_Verizon_Mobile.html.
Cheezy site, but the app works as it's supposed to.
[/threadjack]
Click to expand...
Click to collapse
I don't trust apps that I don't pull myself. Someone in that thread noted that that apk got flagged by Norton (mine doesnt). Just a heads up.
Sent from my ADR6400L using XDA Premium App

arcanexvi said:
I don't trust apps that I don't pull myself. Someone in that thread noted that that apk got flagged by Norton (mine doesnt). Just a heads up.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
I had my concerns, but my Lookout Mobile gave it a thumbs-up, and it seems to work as it's supposed to. But thanks for the warning.

Tried installing vvm but no dice...tried installing as a apk tried dropping in system app tried renaming it. all I get is app not installed do I need to change permissions?

Anyone have luck with the VVM APK? Can't get it to install at all. Using BAMF 2.1. Tried a straight APK install and just dropping it into the sytem/app folder via root explorer.

jdphilly said:
Tried installing vvm but no dice...tried installing as a apk tried dropping in system app tried renaming it. all I get is app not installed do I need to change permissions?
Click to expand...
Click to collapse
I see someone beat me too it
And yes, I did change permissions. Would really love to get this working, as I have to use VZW VVM for work. Thanks.

All I do is install it like anything else. Looks like this.
Make sure you have unknown sources checked. I'll reupload it when I get home if people are still having issues. I've installed it on every version of bamf that didn't include integrated Vvm and cm7.
Sent from my ADR6400L using XDA Premium App

Thank you for all of these

I do appreciate th work you have put into these but I also cant get the VVM to work. I am using thunder stick GB rom and it wont work. Any ideas?

rt1231 said:
I do appreciate th work you have put into these but I also cant get the VVM to work. I am using thunder stick GB rom and it wont work. Any ideas?
Click to expand...
Click to collapse
Won't install or won't run?

I am very happy that this is thread came out cuz I've been tryin to leave Froyo but those 3 major apps were an issue w/GB and it looks like no more issues. Am on the latest Gingeritis and all those apps work anyway so I'll cnfirm the truth about this thread once I decide to test the other GB roms again. Great thread though OP. Much props to you. If you can somehow make the HTC messaging widget bug leave GB as well, You'd be even more of a hero

When I try to launch the My Verizon app on Bamf 3.0 RC3 it says there is an updated version of the My Verizon app in the market. If I select upgrade, it launches the market, but can not find the app. If I select cancel, it closes the My Verizon app. Is anyone else having this problem?

ind3p3nd3nt said:
When I try to launch the My Verizon app on Bamf 3.0 RC3 it says there is an updated version of the My Verizon app in the market. If I select upgrade, it launches the market, but can not find the app. If I select cancel, it closes the My Verizon app. Is anyone else having this problem?
Click to expand...
Click to collapse
Yea same here you can tell its an old version because the widget is old compared to the stock app we need the latest one
Sent from my ADR6400L using XDA Premium App

The VVM apk is not working w/Thunderstick rom, can anyone confirm this. Each time I install, I get the error that a "built in" version is already installed..I know there isn't..oh well..Guess am back to Gingertis 3D

Android market incompatible apps

Ok so I installed the latest android leak from sammobile (XWJVZ)
The problem I'm having is that a few apps arent showing up in android market anymore. I can see them when I use the android website but when trying to install remotely it says incompatible.
Didnt have that problem before. Tried market enabler but nothing changed.
Starting to think its an android 2.3.6 problem.
Anyone maybe have a solution or same problem?
Thanks

I have noticed the same as well since flashing to XWJVZ. There is 1 particular paid app that I cannot install.
If I search the Market for it, it doesn't turn up any results. If I use market.android.com and search for the app it states "This item is not compatible with your device".
I contacted the app's author and they have never heard of such a thing with their application before.
I'm going to flash back to XWJVU (the app worked then) and see if I can install it via the market again.

Jason709 said:
I have noticed the same as well since flashing to XWJVZ. There is 1 particular paid app that I cannot install.
If I search the Market for it, it doesn't turn up any results. If I use market.android.com and search for the app it states "This item is not compatible with your device".
I contacted the app's author and they have never heard of such a thing with their application before.
I'm going to flash back to XWJVU (the app worked then) and see if I can install it via the market again.
Click to expand...
Click to collapse
Ok, thanks for the reply. Guess I'll need to go back to XWJVU also
Let me know if it works

Check themes and apps section for possible fix.

woolf clubs said:
Check themes and apps section for possible fix.
Click to expand...
Click to collapse
there is no fix
Ok so I noticed that with JVW, JVZ and JW1 some apps dont show in the android market.
So I went back to JVT and now they do show in the market. Weird
Unfortunately for me I dont like JVT. The touchwiz launcher wont run stable on my phone

I installed JW1 yesterday and one of the apps I had before now says its not compatible.
One thing I noted is that my cell phone carrier is no longer listed in my market profile.

Valinorian said:
there is no fix
Ok so I noticed that with JVW, JVZ and JW1 some apps dont show in the android market.
So I went back to JVT and now they do show in the market. Weird
Unfortunately for me I dont like JVT. The touchwiz launcher wont run stable on my phone
Click to expand...
Click to collapse
Did you search and try this fix?
http://forum.xda-developers.com/showthread.php?p=20606420
From themes and apps section.

Try chainfire3d's market fix

Black Rose said:
I installed JW1 yesterday and one of the apps I had before now says its not compatible.
One thing I noted is that my cell phone carrier is no longer listed in my market profile.
Click to expand...
Click to collapse
Search for a CSC changer in the market. If you don't have "BMC" (i.e. Bell Mobility) listed as a CSC, you can flash KG3 CSC.
Then in the CSC changer app, choose BMC as your CSC. Save and reboot.
Note: Changing your CSC will perform a factory reset.
---------- Post added at 03:06 PM ---------- Previous post was at 02:55 PM ----------
woolf clubs said:
Did you search and try this fix?
http://forum.xda-developers.com/showthread.php?p=20606420
From themes and apps section.
Click to expand...
Click to collapse
This worked for me! Much appreciated.