Ok, so I just upgraded to Froyo, flashed Perception build 10. But, I can't get MobileAp to work. Like, it'll run and I can find the network on my laptop, but no internet access once I've connected
Ideas?
froyo has a built in wireless tether. try using it instead
settings>wireless and network>mobile ap
mtrsttr said:
froyo has a built in wireless tether. try using it instead
settings>wireless and network>mobile ap
Click to expand...
Click to collapse
That's what I am using, and it's not working. I can join the network, but no internet access
No ideas?
Firebird kernel 24
Have you tried connecting with anything besides your laptop? An ipod or another device? I have always been able to connect with my windows devices but it can take a few minutes after connecting before internet access is obtained.
Aster you able to tether via usb?
You can also try using an app from the market to see if it will work if you haven't already.
http://code.google.com/p/android-wifi-tether/
It's in the market. I use it instead of mobileap cause it allows me to secure my wifi and allow only those who I know to connect. Mobileap is completely open to any and all. I'm sending this post from my hp laptop tethered to my captivate.
@bobarone....click mobile ap settings to enable secure connection. default is usually set to open
newter55 said:
Have you tried connecting with anything besides your laptop? An ipod or another device? I have always been able to connect with my windows devices but it can take a few minutes after connecting before internet access is obtained.
Aster you able to tether via usb?
You can also try using an app from the market to see if it will work if you haven't already.
Click to expand...
Click to collapse
Thanks for your mention of Windows, because I just tried it on my Mac and that's what would not work. My iTouch worked fine though.
Any ideas on making it work with my Mac? if not that's not a big deal as that's not what I'll be using it for primarily, just wondering.
Thanks for your help, didn't even think about it!
Regards
Smith
Hmmm...i thought mac's "just worked" honestly I know nothing about them, every time I get a new laptop I say I am gonna get an apple but wind up with windows.
was just in best buy last week and the new ones look sweet so perhaps this summer I will finally make the leap.
newter55 said:
Hmmm...i thought mac's "just worked" honestly I know nothing about them, every time I get a new laptop I say I am gonna get an apple but wind up with windows.
was just in best buy last week and the new ones look sweet so perhaps this summer I will finally make the leap.
Click to expand...
Click to collapse
Well... Macs are harder to break. lol idk if they 'just work' haha but only reason I even have an apple is because it's fast as hell for school work, and when I got it was before I learned linux so I thought it was the only Windows alternative. Learning linux has made most of this 'more advanced' adb stuff cake because I know all the shell commands haha
I would still recommend one though simply because you'll be relatively hard pressed to find a laptop with such high specs for that price anywhere else. That, and you can multiboot so you can decide what you like best. That was the deciding factor for me lol.
But thanks a lot for your help, this makes me feel much better. I use my wifi tether for work because the upload speeds suck hard and I never get jack done if I don't lol, so I'm happy this works!
Regards
Smith
No problem....glad to be of assistance
newter55 said:
@bobarone....click mobile ap settings to enable secure connection. default is usually set to open
Click to expand...
Click to collapse
Can't get the save button to come up. Tried changing it, but save is greyed out, just cancel as an option.
From a phone
How many characters/numbers are you trying to use? Minimum appears to be eight though I never paid attention til now, the code I have always used just happens to be sufficient.
Related
Does anyone know if this follow scenario is possible?
I want to connect the phone up to my computer via BT or the USB cord, and then the phone will connect via WiFi (802.11b/g) to a wireless router. Can this be done?
Thanks in advance.
wingmanjd said:
Does anyone know if this follow scenario is possible?
I want to connect the phone up to my computer via BT or the USB cord, and then the phone will connect via WiFi (802.11b/g) to a wireless router. Can this be done?
Thanks in advance.
Click to expand...
Click to collapse
Yes. It can be done with a program like wifi internet sharing. I have not used it myself, but NRG has it in his newest rom. You will want to link up with the usb cord because anytime I have wifi and BT going at the same time (internet wifi and BT headphones) there is a conflict. I have also heard that it isn't a great program, but you can find out for yourself. Hope that helps.
wingmanjd said:
Does anyone know if this follow scenario is possible?
I want to connect the phone up to my computer via BT or the USB cord, and then the phone will connect via WiFi (802.11b/g) to a wireless router. Can this be done?
Thanks in advance.
Click to expand...
Click to collapse
Here ya go!
I have to say that it does work. Im using NRG latest Energy rom, july 29, and i can share the internet from my fone to the laptop through wifi and connect the laptop to the internet. basically the fone works like a router... or u can also connect and share internet through usb... it seems to work just a lil bit faster.
I'm not sure how else to explain this. I'm NOT looking to use the cell phone's data plan. I AM looking to use the phone as a usb wireless (802.11b/g) adapter for the computer.
Anything like this?
The Wifi internet sharing is attempting the use of the data plan (no good for my situation).
wingmanjd said:
I'm not sure how else to explain this. I'm NOT looking to use the cell phone's data plan. I AM looking to use the phone as a usb wireless (802.11b/g) adapter for the computer.
Anything like this?
The Wifi internet sharing is attempting the use of the data plan (no good for my situation).
Click to expand...
Click to collapse
use WIFImoster...
its wifi to usb mode is awesome. it will try to pick up a free hotspot first, but you can manually connect to a wpa/wep secured network and then launch it, works like a champ everytime.
edwinh2209 said:
use WIFImoster...
its wifi to usb mode is awesome. it will try to pick up a free hotspot first, but you can manually connect to a wpa/wep secured network and then launch it, works like a champ everytime.
Click to expand...
Click to collapse
Do you mean wifimonster? If so, I don't see a usb mode
wingmanjd said:
Does anyone know if this follow scenario is possible?
I want to connect the phone up to my computer via BT or the USB cord, and then the phone will connect via WiFi (802.11b/g) to a wireless router. Can this be done?
Thanks in advance.
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=377047
u can always try to "obtain" a copy of wmwifirouter
This is just my opinion. It might be wrong!
If you've a computer that can connect to your cell phone with Bluetooth.
I'm quite sure that the computer must have Wifi function also.
Why you want to do some easiest thing to be much more complicated!
@navi_mapper:
Not always; I've seen some laptops with a Bluetooth only card, a WiFi only card, and Bluetooth/WiFi combo cards.
It likely the purchaser may not have chosen a combo option or the laptop came with Bluetooth only. Worst case, the laptop may have shipped with a legacy WiFi device and is too costly to replace.
Cheers,
TurboX2 said:
u can always try to "obtain" a copy of wmwifirouter
Click to expand...
Click to collapse
Ten cuidado...thin ice on this forum.
navi_mapper said:
This is just my opinion. It might be wrong!
If you've a computer that can connect to your cell phone with Bluetooth.
I'm quite sure that the computer must have Wifi function also.
Why you want to do some easiest thing to be much more complicated!
Click to expand...
Click to collapse
PC Desktops rarely have wifi on the internal mobo. Also, I want as many options as possible with this phone. It's the best yet!
muguly said:
Here ya go!
Click to expand...
Click to collapse
This is perfect. Thanks very much
wingmanjd said:
Ten cuidado...thin ice on this forum.
Click to expand...
Click to collapse
Note that there are early versions of WMWifiRouter (up to V.91, IIRC) still available that were released without encumberance. While it might not be Chainfire's preference, it's not exactly discussing "warez" to use an older version. Granted - the person you're cautioning seems to be insinuating that you get a cracked version...
I recommend paying for it, though - the supported paid version is a lot more reliable (and you can actually uninstall it without borking your network setup). It also offers a very nice USB-to-Wifi interface. I think the free ICSControl offered elsewhere on this forum does the same (USB-to-Wifi), but in my brief experience with that program it was not as reliable as WMWR.
hyachts said:
Note that there are early versions of WMWifiRouter (up to V.91, IIRC) still available that were released without encumberance. While it might not be Chainfire's preference, it's not exactly discussing "warez" to use an older version. Granted - the person you're cautioning seems to be insinuating that you get a cracked version...
I recommend paying for it, though - the supported paid version is a lot more reliable (and you can actually uninstall it without borking your network setup). It also offers a very nice USB-to-Wifi interface. I think the free ICSControl offered elsewhere on this forum does the same (USB-to-Wifi), but in my brief experience with that program it was not as reliable as WMWR.
Click to expand...
Click to collapse
Thanks. Didn't know that about the older versions of WMWR. I may save up for the $30 that it'll drain my treasure horde.
wifi router not seen by some computers
any ideas why wifi router works on some of my computers but not others. I am using it right now, but my computer downstairs does not see it at all. Have same issue at work some computers see the wifi signal some do not. Seems to be a windows security setting? Works great on computers that see it.
Hey guys, longtime reader. I was wondering if there was an app that i could DL that would give me the funtionality of the Hero's Mobile network sharing settings? I have searched far and wide and have not seemed to find a solution for me to easily tether my PC running Ubuntu 9.04 to my G1 running Cy's 4.1.11.
Sorry if this has been discussed elswhere, and as you can see ive been a member for a long time and have never needed any help, but i have been lookin for about a week now and have only been able to find these 2 sites about it: http://joshuaredstone.blogspot.com/2009/01/bluetooth-tethering-from-ubuntu-to.html and http://www.kryogenix.org/days/2009/...thout-jailbreaking-or-installing-applications
The second one is the one im inquiring about.
thanks
Please correct me if I'm misreading you, are you looking to tether? ie. use your cell phone to get ubuntu online?
If so I use aNetshare, first result in google. It has worked best for every rom I've ran, the older RCs, cupcake and now donut. I'm roaming 99% of the time so that may be why the other more popular ones give me trouble. idk...
For any of them to work you'll need root and su permissions. There is a paid app out there which claims to tether w/o root or su. I think through usb.
yah im slightly confused as to what exactly it is you are looking for as well...but the one im using is called PdaNet just google it and its one of the first choices.
its free.
it claims it works without root, i wouldnt know cuz im rooted =] but you can try!
it works via usb so it charges the phone while you're surfin =]
EDIT....heres the link. http://www.junefabrics.com/android/index.php
PS. my bad...didnt realize you were already running cyan =]
sonikamd said:
Please correct me if I'm misreading you, are you looking to tether? ie. use your cell phone to get ubuntu online?
If so I use aNetshare, first result in google. It has worked best for every rom I've ran, the older RCs, cupcake and now donut. I'm roaming 99% of the time so that may be why the other more popular ones give me trouble. idk...
For any of them to work you'll need root and su permissions. There is a paid app out there which claims to tether w/o root or su. I think through usb.
Click to expand...
Click to collapse
sorry if i wasnt clear before but i have Ubuntu and want to know how to tether my G1 through bluetooth using Ubuntu....i cant get netshare to work through Ubuntu. how did you get it to work?
bluetooth, you got me there... sry
Ya, sry no idea how to tether via bluetooth. I really only use wifi. Dunno why(maybe because of high data traffic) but my phone would constantly die while tethered and charging via usb.
Other than getting ubuntu to see&install my wireless card(nothing to do with my phone) I don't remember having any problems getting it to see or connect to my phone.
Or am I still confused and what you're really trying to do is use the internet you already have working on ubuntu to get you phone online?
for whatever reason my Ubuntu 9.04 does not automatically read my phone (Tmobile G1) as a modem through the usb. whenever i configure the steps (http://technologyheaven.com/2009/08/27/phoneasmodem/) to get it to read my phone it still says not connected even though it IS connected. I know the usb ports work cause i can get it to mass storage...just not modem.
Any help would be greatly appreciated, thx!
it's been a long while since I used USB tethering (anyone remember tetherbot & socks proxies). You may need to have the android sdk installed or atleast know how to communicate with your device via console. Connecting as a mass storage device and as a modem are two different things, so one may work great while the other still needs more setup.
Hopefully someone else with more experience can chime in.. please.. anyone...
I don't know a ton about cyan's roms but I'm assuming they come rooted by default. Is there a reason you don't want to use the wifi method for the time being?
edit: fwiw, you can use the wifi method while charging via usb. But, with heavy traffic(downloading huge files consecutively) the usb may not be able to keep up with the battery usage.. especially if on a 3g network. Using the stock charger & wifi on 3g the battery actually gets a little charge(power supply is ~500mA on usb, ~1A on charger). Either way, usb or wifi, usb or charger, turn off your screen for best results.
Im surprised no one mentioned Wireless tether for root users:http://code.google.com/p/android-wifi-tether/
supports both wifi and bluetooth.
@B3astofthe3ast, cool I didn't know that(no bt on my laptop, ya it's kinda old heh). For whatever reason on several different roms I get terrible data when using that app, it might be because I'm 100% roaming with no 3g ever. Tethers to pc fine just 9/10 doesn't seem to be able download stuff.
thx, but i have that (http://code.google.com/p/android-wifi-tether/). anyway, im thinking its got something to do with my comp and not the phone itself, seeing as i can get on internet with windows just fine. Im just trying to move away from windows and to Ubuntu.
p.s. i dont have a wireless card in my self built computer, thats why i dont use wifi!
Ok. So I have an HTC Hero CDMA with Fresh ROM 1.1. I have the wifi-tether app installed, but my desktop does not have wireless. I normally use PdaNet on Windows 7, but I am now dual booting Ubuntu 9.10 with Windows 7 Ultimate. I want to USB tether my phone to either Ubuntu 9.10 or OpenSuse 1.1. I have tried the little "Sprint MNS rig" and it fails for me every time and every way. I am open to anything! I will even wipe my phone and install a new ROM if needed! I just really want to USB tether my phone to Linux! Thanks!
Unfortunatly, the USB tether app doesn't work on our Hero.
Have you tried running PDAnet in Wine?
This worked for me.
defaria said:
This worked for me.
Click to expand...
Click to collapse
These links are gettin better and better.
defaria said:
This worked for me.
Click to expand...
Click to collapse
Ya, I have been googling since 5 A.M. so how about NOT being a complete ass, ok?
KyleIsTheBeast said:
Ya, I have been googling since 5 A.M. so how about NOT being a complete ass, ok?
Click to expand...
Click to collapse
Well I used to tether my diamond to linux all the time and afaik you should be able to get it.
Look up the guide that uses the race condition(enabling sharing before connection grabs), it's on this forum.
Setup a dial up connection in KPPP or w/e your choice is. Have the connection dial #777 and fill in anything for user/pass and that may work.
Best I can think of at the moment.
ROFLMAO.
That link works for me too.
Anyhow i can't think of a laptop that has windows 7 that doesn't have wireless? whats the use having a laptop without wireless? where did you get this state of the art beast. does it have bluetooth?
defaria said:
This worked for me.
Click to expand...
Click to collapse
Maybe you should actually read some of the things you google.
The first link talks about MNS, which he said does not work.
The second link is the same thing.
The third link is this thread.
The fourth link is also MNS.
cteneyck said:
ROFLMAO.
That link works for me too.
Anyhow i can't think of a laptop that has windows 7 that doesn't have wireless? whats the use having a laptop without wireless? where did you get this state of the art beast. does it have bluetooth?
Click to expand...
Click to collapse
If you're going to attempt to be a smart ass, at least read the post first instead of seeing what other people say and repeat them.
AFAIK, most desktops do not come with built in wireless cards. Seems you can pick up a small selection of motherboards from Newegg that have a/b/g, but that's about it.
I repeat however, have you tried PDAnet in Wine?
My Windows 7 desktop doesn't have wireless either.
But wireless pci cards are getting cheaper as we speak. That's an option I guess?
cteneyck said:
ROFLMAO.
That link works for me too.
Anyhow i can't think of a laptop that has windows 7 that doesn't have wireless? whats the use having a laptop without wireless? where did you get this state of the art beast. does it have bluetooth?
Click to expand...
Click to collapse
Hey smart ass? First off, I said DESKTOP. Secondly, Lets say I DID have a laptop with Windows 7 and no wireless, you mocking it is NOT solving my problem, which is why your post should be reported for low quality. Lastly, "whats the use having a laptop without wireless?" Isn't even a sentence. Stay off my threads. Thanks
And to the guy recommending PdaNET on Wine, No I haven't dude I am looking into it right now.
Here's something else to look into
http://code.google.com/p/azilink/
If you can get the race condition to work, the KPPP connection should work.
If not, try the VPN.
As far as using Wired Tether on 2.1, it seems it runs, the Su request goes through, the computer make the "hardware plugged in noise," but as far as getting data to transfer, nothing.
However I'm at my Mom's house, and her USB ports are all screwed up, so my tests are inconclusive.
KyleIsTheBeast said:
Hey smart ass? First off, I said DESKTOP. Secondly, Lets say I DID have a laptop with Windows 7 and no wireless, you mocking it is NOT solving my problem, which is why your post should be reported for low quality. Lastly, "whats the use having a laptop without wireless?" Isn't even a sentence. Stay off my threads. Thanks
And to the guy recommending PdaNET on Wine, No I haven't dude I am looking into it right now.
Click to expand...
Click to collapse
First off. Kyle i don't think your mother would appreciate you talking to ppl like that.
Second. yes i did miss read your post. my bad
Third. the second post was funny as hell. and proves you didn't do any searching on this forum much less any other.
so please stop whining and get busy trying to figure it out. if you get stumped post your errors and commands and we'll lend a helping hand.
Third have you tried proxoid?
Also i found this link
http://blogs.myspace.com/index.cfm?fuseaction=blog.view&friendID=409949084&blogID=446443940
its for a g1 but you should be able to make it work.
so don't post asking for somebody to figure it out for you unless you search first.
Tethering works just fine for me. It comes up as a wifi access point in network manager, and it also comes up in iwlist for an essid. im using gentoo btw
And im using the wireless tether app which comes in most custom roms to do my tethering
you can download the said app here : http://code.google.com/p/android-wifi-tether/
abcdfv said:
As far as using Wired Tether on 2.1, it seems it runs, the Su request goes through, the computer make the "hardware plugged in noise," but as far as getting data to transfer, nothing.
However I'm at my Mom's house, and her USB ports are all screwed up, so my tests are inconclusive.
Click to expand...
Click to collapse
Wired tether(the app) doesn't work. I've tried on 1.6, 2.01 and 2.1. It's an incompatibility with our Heros it seems.
And at above poster, he said NOT wireless.
cteneyck said:
First off. Kyle i don't think your mother would appreciate you talking to ppl like that.
Second. yes i did miss read your post. my bad
Third. the second post was funny as hell. and proves you didn't do any searching on this forum much less any other.
so please stop whining and get busy trying to figure it out. if you get stumped post your errors and commands and we'll lend a helping hand.
Third have you tried proxoid?
Also i found this link
LINK
its for a g1 but you should be able to make it work.
so don't post asking for somebody to figure it out for you unless you search first.
Click to expand...
Click to collapse
First off, My mom is dead. Died when I was six jackass.
Secondly, You must not have learned your lesson about READING THE POSTS huh? I said I have been searching since 5 A.M. for an answer but all have failed, or aren't companionable.
Lastly, I have already found that. For some reason, I can not establish a connection. It will not even pick up the fact that there is a wired connection.
P.S. Proxoid is NOT what I am looking for. It does not connect like an internet connection and I have to go through every program I want to use for the internet and change the proxy settings manually. Not only that, it lags, disconnects, and the response time is terrible.
cteneyck said:
Third. the third post was funny as hell. and proves that the person who posted that link, all the people commenting on how funny it was, and myself, didn't even look at the first page of results, and just laughed at our own stupidity.
Click to expand...
Click to collapse
Quoted for Truth.
intx said:
Wired tether(the app) doesn't work. I've tried on 1.6, 2.01 and 2.1. It's an incompatibility with our Heros it seems.
And at above poster, he said NOT wireless.
Click to expand...
Click to collapse
Oh, my b. And in the 2.1 build, if you go into wireless settings and enable mobile network sharing, it comes as an interface usb0 in which you can dhcpcd it to gain internet access
I haven't tested this, but you could probably get the same usb0 interface using this app: http://code.google.com/p/android-wired-tether/
KyleIsTheBeast said:
First off, My mom is dead. Died when I was six jackass.
Secondly, You must not have learned your lesson about READING THE POSTS huh? I said I have been searching since 5 A.M. for an answer but all have failed, or aren't companionable.
Lastly, I have already found that. For some reason, I can not establish a connection. It will not even pick up the fact that there is a wired connection.
P.S. Proxoid is NOT what I am looking for. It does not connect like an internet connection and I have to go through every program I want to use for the internet and change the proxy settings manually. Not only that, it lags, disconnects, and the response time is terrible.
Click to expand...
Click to collapse
i still don't think she would appreciate your tone. and even though you have been searching you have yet to pick one possible solution and post any errors that you have had. you just ***** that you can't figure it out and flame everybody that finds humor at the "third" post. BTW its around 5 am somewhere in the world so that doesn't prove a thing.
Talked my buddy into a Gtab after giving him a test drive on mine...
1 problem, his smart phone is through Sprint and he uses a Black Berry.
He connects his LT to the internet with a USB cable and his BB.
I thought I could set him up through Bluetooth, but I cant figure out how to tether the connection.
I can "pair" the 2 together no problem, but I dont have a clue how to make the internet connection.
He uses a Sprint program on his LT, so I'm wondering if there's a program that would do the same on the Gtab...
Any help would be greatly appreciated...
Thanks in advance...
Ive tried to usb and BT tether with no luck so far....anyone have any success?
jamesgf said:
Ive tried to usb and BT tether with no luck so far....anyone have any success?
Click to expand...
Click to collapse
I can get the 2 to "pair" without a problem, what I need is a terminal app to use the BB as a modem.
I know they do this on the iPad's all the time for the wifi only users.
I dont have enough experience with the Android OS to set this up.
I'm not even sure how to tether the Gtab to an Android phone.
Really need some help on this one or told it's not an option.
Thanks
As far as I know you can't do usb/bluetooth tethering atm . Unless someone manage to port over archos tethering protocol/tethering wizard.
[email protected] said:
I can get the 2 to "pair" without a problem, what I need is a terminal app to use the BB as a modem.
I know they do this on the iPad's all the time for the wifi only users.
I dont have enough experience with the Android OS to set this up.
I'm not even sure how to tether the Gtab to an Android phone.
Really need some help on this one or told it's not an option.
Thanks
Click to expand...
Click to collapse
I don't think it's an option direct from the GTab to the BB. I've been trying to get this to connect with my Storm 2, and have had no luck at all with it. Like you, I can pair the devices, but they won't connect. The only tethering software I can see that was worth a shot was Tether, and they don't support BB to Android.
Someone else in another thread pointed out a possible solution, a Cradlepoint CTR-350 Cellular Travel Router. You can connect your BB to create the access point, then connect the GTab to the 350. Runs about $77.00 from what I can tell online.
Ronin916 said:
I don't think it's an option direct from the GTab to the BB. I've been trying to get this to connect with my Storm 2, and have had no luck at all with it. Like you, I can pair the devices, but they won't connect. The only tethering software I can see that was worth a shot was Tether, and they don't support BB to Android.
Someone else in another thread pointed out a possible solution, a Cradlepoint CTR-350 Cellular Travel Router. You can connect your BB to create the access point, then connect the GTab to the 350. Runs about $77.00 from what I can tell online.
Click to expand...
Click to collapse
Hummmmm.... That might be a possibility.. Thanks...
Keep me posted if you try this out....
Does blackberry have any hotspot apps?
My wife uses a Nokia N97, and purchased the Joikuspot hotspot app. The G-tab can see the Nokia's hotspot once the ad-hoc wifi hack is installed.
Will do, but the more I look the more I like the CradlePoint PHS300 Personal Hotspot. Little more expensive, but might be worth it since it's battery powered.
Ronin916 said:
Will do, but the more I look the more I like the CradlePoint PHS300 Personal Hotspot. Little more expensive, but might be worth it since it's battery powered.
Click to expand...
Click to collapse
Good point... I pulled the Cradlepoint 350 up on line and it was AC only...
I also like the suggestion about "HOT SPOT" app on the BB... Haven't checked that as of yet....
If we can get this through software, that would be so much better...
He uses a Sprint program on the laptop to connect so we know it has the
capabilities to work as a modem and he has internet access.
I'm wondering how the iPad folks use their phones to connect to the internet.
I know most have the WIFI only models and they tether through their phones.
He just ordered the 300.....
They are running a holiday special of $99 dollars and that includes a free second backup battery....
Regular price was over 200 with shipping.... Cost him 109 with shipping...
He figures he can use the hot spot for other users also. It supports up to 16 users at once.
His Sprint card was listed as a option so this is even a better solution.
Huge thanks for pointing us in the right direction.
[email protected] said:
He just ordered the 300.....
They are running a holiday special of $99 dollars and that includes a free second backup battery....
Regular price was over 200 with shipping.... Cost him 109 with shipping...
He figures he can use the hot spot for other users also. It supports up to 16 users at once.
His Sprint card was listed as a option so this is even a better solution.
Huge thanks for pointing us in the right direction.
Click to expand...
Click to collapse
No problem, let me know how it works out.
pdanet for blackberry has bluetooth connection
jamonthis said:
pdanet for blackberry has bluetooth connection
Click to expand...
Click to collapse
What app would you run on the Gtab to make the connection?
Bump...
Anyone have any more information on this, either the bluetooth pda net or using that 300?
Thanks!
Install pdanet and creat your hotspot. Once that is done go to your wireless setting and connect to the hotspot.
[Deleted by Author]
seadooxp30 said:
Install pdanet and creat your hotspot. Once that is done go to your wireless setting and connect to the hotspot.
Click to expand...
Click to collapse
??? I have PDANet on my Black Berry and PDANet on my GTab. On the BB, I selected Enabled Bluetooth DUN. The same thing for the GTab. Doesn't do anything.
I suspect both are listening for something to connect to them. Not sure how this is supposed to work.
I'm using it with wifi via my iphone...
Ah, that must be the key. You can't do it via bluetooth. You have to have a wifi connection to your phone.
The original posting asked how to do this via bluetooth.
PDAnet via usb requires a client on the client computer. I contacted PDAnet if they would create an android client for tablets and their answer, atleast for now, is we are SOL. Use BT DUN. But like the OP I cannot get my G tab to connect, only pair with my droid x or Aria. I don't know what is supposed to happen after turning on the BT DUN in PDAnet. Should the G tablet then be able to connect? Does some other software need to be run on the gtab to allow DUN connection?
I'm using tnt lite 3.1.4, also had vegan, but none could do anything with my 3g sticks. Following different forums, I see most devices can (at least some specific sticks). Has anyone managed to set up a 3G conection? Is there a how to I could follow? What chipset the stick had?
Thanks,
T.
I tried a sprint usb aircard.. no go..
The only way I have been able to get a 3G connection is to wirelessly tether to my DroidX work phone...
1) Install Z4root on the droid and run it to root the phone
2) Install wifi tether on the droid and set up a wep key and ssid
3) Turn on the wifi tether
4) The table sees this wifi "router" or connection, I set the wep key on that connection, the two units negotiate an IP, and zap, it has 3G through the droid
Not sure if this is helpful, but that is what I had to do in my own situation.
if it's in the kernel, it should seriously work, but someone has to build it. there's absolutely no reason for this not to work if someone builds it -- it has conceptually worked in linux for years.
myndwire said:
if it's in the kernel, it should seriously work, but someone has to build it. there's absolutely no reason for this not to work if someone builds it -- it has conceptually worked in linux for years.
Click to expand...
Click to collapse
I can build the kernel but I believe we need to add some stuff in initrc for the usb to connect to serial (like ttyUSB). Once I get another Gtab, I'll look into this.
clemsyn said:
I can build the kernel but I believe we need to add some stuff in initrc for the usb to connect to serial (like ttyUSB). Once I get another Gtab, I'll look into this.
Click to expand...
Click to collapse
Please do -- this is the one feature I'm dying to have! I promise a (small, sigh) donation once it's done
Here's the extra scripts I need to wired-tether my cheap T-mobile prepaid phone to my linux netbook:
http://blog.swatteksystems.com/what...ether-huawei-u7519-wind-mobile-linux#comments
THANKS!
clemsyn said:
I can build the kernel but I believe we need to add some stuff in initrc for the usb to connect to serial (like ttyUSB). Once I get another Gtab, I'll look into this.
Click to expand...
Click to collapse
exactly man, thanks for stepping up! this will be ultimately useful on many different devices with usb host features, and shouldn't be ridiculously difficult to get going, and gain some real cred with the tablet community, especially now as we're the first with this new tegra2 platform, with over 20-30 new devices coming soon. i'm unsure of how many are wifi-only, but the ability to merely jack in with a 3g/4g usb modem would be ultimately useful to many, and will save a ton of money for folks.
clemsyn said:
I can build the kernel but I believe we need to add some stuff in initrc for the usb to connect to serial (like ttyUSB). Once I get another Gtab, I'll look into this.
Click to expand...
Click to collapse
A kernel supporting the 3g sticks would be great I have 3 of them, so I am ready for testing
T.
TeamSpeed said:
The only way I have been able to get a 3G connection is to wirelessly tether to my DroidX work phone...
1) Install Z4root on the droid and run it to root the phone
2) Install wifi tether on the droid and set up a wep key and ssid
3) Turn on the wifi tether
4) The table sees this wifi "router" or connection, I set the wep key on that connection, the two units negotiate an IP, and zap, it has 3G through the droid
Not sure if this is helpful, but that is what I had to do in my own situation.
Click to expand...
Click to collapse
Thanks for that. I also use teether from my NexusOne, but I have to give it up as I got to move to BlackBerry - so I need a different solution... (what a step backwards :-(
T.
The stick is probably seen in the kernel. The other parts, Networkmanager, dialier, ppp are not on the tab. They would have to be recompiled for the arm processor and I'm not sure what other work is needed.
Thanks Clemsyn. Using your latest kernel with Vegan B5.1. I bought a Novatel USB727 (Verizon) stick off ebay (built in Linux support) just to try this out. Would gladly test if needed.
I would also be happy to test with ATT and Verizon 3G USB modems...
Update:
Built a kernel with 3g USB support, used my friend's Verizon Mifi, plugged it in the Gtab and it turns on, Dmesg shows it is detected as Novatel wireless and shows it's serial info. That's about it, can't browse and use it. Any ideas?
I'll try my usb modem using the ubuntu load. It should have the other networking parts to dial and connect.
In the ubuntu load, networkmanager is not supported yet so usb modems are still on hold.
Yes please, we need this. I have a sprint card from work and would love to ditch the laptop when travelling. Clemsyn, I could send you a copy of sprint smart view 3g manager if you think it would help.
Sent from my VEGAn-TAB-v1.0.0B5.1 using Tapatalk
I am able to use 3G easily using MyWi app from Cydia on my iPhone. This Gtablet works great on 3G! And since I always have my phone on me, I always have a 3G network on my Gtablet! iPhones basically suck, but this is probably the only good thing I've been able to use it for! And man oh man, its working great! Btw, When my phone contract runs out, I'm going to change to the Evo! That would be sweet!
SirDroidAlot said:
I am able to use 3G easily using MyWi app from Cydia on my iPhone. This Gtablet works great on 3G! And since I always have my phone on me, I always have a 3G network on my Gtablet! iPhones basically suck, but this is probably the only good thing I've been able to use it for! And man oh man, its working great! Btw, When my phone contract runs out, I'm going to change to the Evo! That would be sweet!
Click to expand...
Click to collapse
Same here. I've been using Wireless Tether on my rooted Droid X with an unlimited 3G data plan for several weeks and it is pretty sweet. And like you said, since I have my phone with me all the time anyway, this seemed like an obvious solution.
I would be interested in the progress of this usb effort since my carrier now offers 4G modems.
Does anyone have any idea if the gtablet will tether to the blackberry
Here Made support for a similar tablet Toshiba Folio 100:
http://forum.xda-developers.com/showthread.php?p=10617881
Perhaps our main problem - is that excluded from the firmware application for telephone calls?