Related
I was reading this thread [RECOVERY] Monster RootPack 0.7 / Clockwork Recovery 3.0.0.5 SD (1.1 Compatible!). But, since I am new to this forum I couldn't post there. I hope this is the right place to ask for help.
I upgraded my NC to 1.1.0 successfully. I put Autonooter 3.0.0 on a MicroSD card. With my NC off, I inserted the card and then plugged the NC into my PC. I got a black screen for over 5 minutes. It looked like nothing was happening, so, I disconnected the NC, removed the SD card and tired to turn the NC on. No joy, it won't turn on and won't boot at all. I think my Nook is bricked. Any ideas what went wrong?
I've read some other threads about similar problems. It seems there is a fix to get it back to stock (1.1.0). I hope the Recovery thread I mentioned above is where the answer lies. But, I'm a bit confused and don't want to make any more mistakes. I only have one 4GB SD card at my disposal right now.
My questions are as follows:
1. Is my NC bricked beyond hope of recovery?
2. If I follow the procedures in this post can I get it to boot from the sd card even though it won't turn on at all?
3. What is the difference between the Rootpack and the Clockwork Recovery Image?
4. This is the confusing part. Should I download the RootPack? Or, should I download a bootable Clockwork SD card (128mb, 1gb, 2gb, 4gb, 8gb)
5. Since I only have a 4GB card, what should I choose?
6. Should I opt for 1.0.1, or 1.1.0 where it was still working.
7. Can I get all of this on one 4GB card?
8. Is there anything else I should be weary of before starting this procedure?
If i have posted this in the wrong place, I am sorry. But, I hope someone can clear things up for me. Thanks.
This is the right place to ask general questions.
1. Most certainly not.
2. Yes, using a bootable CWR SD is the way to go.
3. Totally different. The Rootpack is the name given to a package that helps you root your Nook. CWR image is a recovery image. That means you can boot to this recovery utility and apply changes to you NC (like repairing stuff, making backups, etc.).
4. An image will adapt to the drive. If you have a 4GB SD and burn (dd) a 1GB image to it, your SD will suddenly present itself as a 1GB SD. If you format it with the right tool, your SD will be 4GB again. So don't panick, if it says 1GB after burning, it's jut "adapted to the image". You haven't lost any disk space.
5. 1GB would be enough, but you can go up to 4GB image with a 4GB.. It could sometimes be a problem to apply an image which is the exact same size as the drive. I would use th 1GB, which is plenty for what you are going to do.
6. That's up to you. Both should work.
7. Yes.
8. Just read threads exhaustively before attempting anything..
So what you need to do is read threads about this CWR Bootable img to learn how to burn it to your SD.
Then, find the appropriate .zip files to flash (apply) (1.1 recovery and 1.0.1 are available in dev section.
Copy them to root of SD.
Boot with the SD Card and apply zip files from SD.
If your NC should still have problems booting, you can also apply a boot repair zip file, that you will find on my Nook Color restore to stock tread in dev..
Sam
His Rootpack wont work on 1.1.0 You should have seen that in his instructions. It will only block 1.1.0 and fake it. You need to see this thread to fix your nook. It is 100% NOT bricked, just messed up atm. You can fix it tho. Read here:
http://forum.xda-developers.com/showthread.php?t=949699
Thanks for thr quick reponse Sam. I'm at work now, but will be able to use your suggestions later this afternoon\tonight. So, if I get a 1gb CWR image on my 4gb sd card, plus the 1.1.0 zip file and put it in the root of the sd card, the Nook should boot up even though I can't turn it on now? How long typacally will it take to boot up? What should I expect to see?
I will post results after I try the procedure. Thanks again!!
Thanks Thiboi69. I have printed out the instructions from the link you sent and will follow them to the T. I'll post results later.
It will work. I have never heard of a 100%bricked NookColor to date. And I have read 1,000's of posts here over the past 4 months. IT is just your boot partition that is messed up and B&N made it check the sdcard first for a Boot partition, then fall back to eMMC. Thank you B&N !!!
I downloaded all the files, wrote them to my sd card, and put it in the Nook. When I connected the Nook to my pc, I got a messaage the the battery was too low to turn on. So, I took the sd card out, and put the Nook on charge. After a while, it turned on, booted up and when I checked my OS, I found that I had
version 1.1.0. Apparently, my attempt to root with autonooter 3, never got installed, partially or completely. And, my battery probably got to low to turn the nook on. So, I didn't need to use CWR after all. I apologize to all who have tried to help me. But, all replies were good and contained useful info.
Now, my question is: Should I try to use Autonooter 3 again, or is there an easier
(more foolproof) way to root v1.1.0?
I just got a nook last night with the sole intention of hacking it - and did so in a matter of minutes. Autonooter couldnt be easier! When you get to the part of putting the SD card in the nook and connecting it to USB to make it boot, just plug it in and go get a cup of coffee. Don't unplug or touch anything until it boots up by itself. At 1st I thought it wasn't doing anything as I didn't see a clockwork mod screen come up or anything, but just be patient and it'll tell you when it's done. Just make sure it's pretty well charged when you do it - mine was about 80% or so.
Honestly after less than a day of the rooted stock 2.1 Eclair OS, I'm ready to drop a fully customized Froyo or Gingerbread image on this thing. Autonooter it 1st and run it for a few days 1st and see what you think. I'm still learning the ins and outs of tinkering with this thing, but so far it seems much easier than the Epic and Moment I've been beating on. Seems pretty well unbrickable too thanks to the boot to SD 1st option B&N baked into this puppy.
jostarr said:
I was reading this thread [RECOVERY] Monster RootPack 0.7 / Clockwork Recovery 3.0.0.5 SD (1.1 Compatible!). But, since I am new to this forum I couldn't post there. I hope this is the right place to ask for help.
I upgraded my NC to 1.1.0 successfully. I put Autonooter 3.0.0 on a MicroSD card. With my NC off, I inserted the card and then plugged the NC into my PC. I got a black screen for over 5 minutes. It looked like nothing was happening, so, I disconnected the NC, removed the SD card and tired to turn the NC on. No joy, it won't turn on and won't boot at all. I think my Nook is bricked. Any ideas what went wrong?
I've read some other threads about similar problems. It seems there is a fix to get it back to stock (1.1.0). I hope the Recovery thread I mentioned above is where the answer lies. But, I'm a bit confused and don't want to make any more mistakes. I only have one 4GB SD card at my disposal right now.
My questions are as follows:
1. Is my NC bricked beyond hope of recovery?
2. If I follow the procedures in this post can I get it to boot from the sd card even though it won't turn on at all?
3. What is the difference between the Rootpack and the Clockwork Recovery Image?
4. This is the confusing part. Should I download the RootPack? Or, should I download a bootable Clockwork SD card (128mb, 1gb, 2gb, 4gb, 8gb)
5. Since I only have a 4GB card, what should I choose?
6. Should I opt for 1.0.1, or 1.1.0 where it was still working.
7. Can I get all of this on one 4GB card?
8. Is there anything else I should be weary of before starting this procedure?
If i have posted this in the wrong place, I am sorry. But, I hope someone can clear things up for me. Thanks.
Click to expand...
Click to collapse
Joe, I would recommend downloading the 1gb rootpack image and a restore to stock file. Make your bootable clockwork recovery image, place the resotre to stock file on the sdcard, turn your nook off, insert the sdcard, power on and flash the file. All this info and more can be found in my thread here:
http://forum.xda-developers.com/showthread.php?t=949699
Thanks for your suggestion Riley, please take a look at my post # 7 above. Seemd my NC
had a low battery. When I charged it, all was ok. It booted up and I was back in 1.1.0.
But, I just now tried autonooter 3.0.0 again. When I pluged thr NC inyo my PC, I got some sort or warning message. I hit cancel and waited a few minutes. The message came up again. It said the device was not recognized. I unplugged, removed the card, and my fully charged NV won't turn on. And, windows explorer can not read the sd card. This is basically what happened yesterday to cause my panic. The sd card had all the files befor I inserted it into the NC. Now, it's unreadable and I can't turn on or boot the NC again.
Is it autonooter 3.0.0, or the card, or the Nook, or me?????
One correction to post # 10. I can read the sd card in windows explorer. But my NC won't turn on.
With sd card out of the Nook, I get a "Welcome to the Found New Hardware Wizzard"
What does this tell anyone about the condition of my Nook?
I am having a problem and don't really know what to do. When I start my NC its stops at the N screen and goes no further. I've tried a lot of the different ways to get it back to stock with no luck. When I try to write CWM to my SD card with win32 it either doesn't have enough room to put the stock file on the zip with it or when I open the SD card it says the card needs to be formatted. The file is a tr.gz or something like that is there a step between that I am missing or just download the CWM and write to SD using win32? I also tried adb with no luck. I am very new to rooting so any super dumbed down instructions would be greatly appreciated.
Sent from my ADR6300 using XDA App
You can put the rom image to a separate SD card. Just swap it after you boot up from cwr. I did it before for flashing froyo to emmc.
Sent from my PC36100 using XDA App
72chevy2k2 said:
I am having a problem and don't really know what to do. When I start my NC its stops at the N screen and goes no further. I've tried a lot of the different ways to get it back to stock with no luck. When I try to write CWM to my SD card with win32 it either doesn't have enough room to put the stock file on the zip with it or when I open the SD card it says the card needs to be formatted. The file is a tr.gz or something like that is there a step between that I am missing or just download the CWM and write to SD using win32? I also tried adb with no luck. I am very new to rooting so any super dumbed down instructions would be greatly appreciated.
Click to expand...
Click to collapse
Have you followed the restore-to-stock procedure outlined in this thread?
http://forum.xda-developers.com/showthread.php?t=914690
Just a noobish advise!
After configure everything and become accustomed to some of the NC behaviors this should not matter, but I remember at my first attempts at rooting the NC, using a Win7 PC was much easier than using Win XP or iOS devices. Might fix your 'not recognized' problems, sd card recognition and formatting problems etc.
It has CWM on it. I can get it to recovery but it will not recognize the SD or not mount it and I go to mount it in the menu and it says something like can not mount SD card so I have been trying to do the CWM SD burn but I keep getting the above errors I am on a vista computer so I will try it on my windows 7 one and see how that goes. And the different SD card one I will try that as well after work thank you for the help.
Sent from my ADR6300 using XDA App
RickOSidhe said:
Have you followed the restore-to-stock procedure outlined in this thread?
http://forum.xda-developers.com/showthread.php?t=914690
Click to expand...
Click to collapse
Yes I did try that one I put the nookie froyo on the SD and put it I'm my turned off NC and plugged it in to my computer and it sat at the N screen forever and after a while I took it off and it was still in the same state could the CWM be the problem?
Sent from my ADR6300 using XDA App
I'm not sure what posts 13 thru 18 have to do with my problem???
Just didn't feel like starting a new thread for the couple of questions I had along the same line as yours.
Sent from my ADR6300 using XDA App
How to root your brand new Nook Color - For Noobs on windows - I'm sure this will all work from Mac too, but I do not have one so I don't know
-I know there are plenty of threads our there for this - but I figured I would compile my journey to root so that anyone slightly confused with the process of rooting, starting over and re-flashing stock nook, using root explorer is all in one area.
First things First - Without the Cyanogenmod team, everyone who has a hand in this at XDA, Dalingrin's overclock, everyone who compiled the files for recovery, Clockworkmod team, iomonster, everyone! This wouldn't be possible. Drop by their websites and buy them a beer or two.
Secondly - I am not responsible for any damage at all, if you don't follow simple instruction then too bad for you. Also, none of the above mentioned folks are responsible for any damage to your Nook Color (NC).
NOW FOR ROOT!!!
go to http://nookdevs.com/NookColor_Rooting and follow the instructions. Download the appropriate autonooter for your software version. (this can be checked on the nook by going to settings, device info, about nook)
Follow the helpful people at NookDevs instructions and thank them for their help!
After you achieve root you should see Market app in your extras tab in the Original Nook Software, This is good, if you don't go back and try again. Now pull out your card(dont forget to unmount and format) , and turn off your nook .
Let's Begin With CM7
First you will need to make yourself a bootable clockworkmod (CWM) to run your installation from -
download winimage for your PC - http://www.winimage.com/download.htm and install the appropriate file (obviously x86 for 32 bit PC, and x64 for 64 bit)
install it!
next download 7-Zip to extract the files!!! http://www.7-zip.org/
when installed go to tools/options/ and make sure tar is checked and gz is checked. You might as well select all!
Next download bootable clockwork image http://tsunade.net/nookdev/clockwork/0.1-ext4/
I used the 1GB one on my 8GB class 4 card. It burns faster and works just fine!
Burning Process!
First insure that your already formatted card is formatted by formatting again! woot for the word format! Next-
On a computer open win image
click ok!
plug in your microSD card
click on Disk tab
go down to restore virtual Hard Disk Image
Select your microSD
find the place you saved the image after extracting through 7zip (I saved to Desktop)
Click OK and it should start burning
after five minutes or so the image will be written to the microSD card
Now to install CM7!!!!!!!!!! Drop by their page if you want and donate some beer money!!!!
Download these files!
http://mirror.cyanogenmod.com/?device=encore&type=nightly (CM7 Encore ZIP - Get the latest one)
http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps (google apps file!!!!)
http://forum.xda-developers.com/showthread.php?t=925451] (Dalingrins!!!!! OVERCLOCK - even if you don't need this, you WANT THIS (my attempt at a jedi mind trick) just do it).
download the zip files and put them on that 1GB cwm bootable SD card you made!!, and copy the the zip files to the ROOT of the sd card i.e just drag and drop them into the sd card.
Now safely remove and plug the card in to the nook color
it will boot up into CWM - go to this page http://forum.xda-developers.com/showpost.php?p=11535969&postcount=151 and start at the installing section number 2!!! Thanks Faceman66 Only follow the install section and first boot section up until 2 if you have a DLINK router!!!! this is very important!!!! Once your done with the installation again, make sure to format the microSD card, do not use cyanogen it will mess everythin up, format it through your computer.
Dlink router connection issue!
The wifi in cyanogen just scans and disconnects constantly without connecting. Skip all of the first boot process like signing in to google, etc. Just get into the main screen of your new ROM. Connect it via USB to computer and "turn on USB storage" in the drop down notification bar.
Now preferably purchase the Root Explorer App on your phone or on your computer (you wont be able to access the nook color CM7 market yet. If you find it by other means I dont want to hear about it. if you download on your phone, download astro file manager as well, open astro file manager and click menu, tools, application backup. Find root explorer, back it up, pull it off your phone to the computer by searching the SD card for the "backups folder" and then drag and drop it onto your nook SD card. Use CM7 file explorer, find the APK and then install. Now using root explorer go to
/system/etc/wifi/ and find the tiwlan.ini file, at the top of the screen youll notice a button that says Mount R/W, click it. now press and hold on tiwlan.ini and open in text editor. go down about half way to find WifiAdhoc = 1 or something to that affect.
WiFiAdhoc is set to 1 on the cm7 builds but if you need change it to 0 for wpa/wpa2 will work.
Once that is set to 0, reboot, and connect to your internets.
WHAT IF I MESSED EVERYTHING UP AND MY NOOK COLOR IS BRICKED! IMPOSSIBLE! just follow these instructions!!!! Thanks to HittingSmoke over at addictive tips
This guide is broken and bricks the Nook. The problem is, it tells you to format /boot when you should NOT format boot.
If you have the black screen because of following this guide, here’s how to fix it:
Format your SD card and re burn that 1GB cwm image (It worked perfect for Me)
Next, download:
http://www.etoile-laconnex.com/nook-complete-restore-1.0.1.zip
and
http://www.multiupload.com/VEJFMO05BV
Copy them both to the SD card that you made with winImager.
Put in the SD card and hold the power button until it boots into recovery again.
Under Mounts and Storage, format /boot, /system, /data and /cache
Using the “Install zip from sdcard” option, flash “repartition-boot-with-stock.zip” THEN “nook-complete-restore-1.0.1.zip”
Take out the SD, reboot and you’ll be back to a working stock Nook.
After that, follow this guide:
http://forum.xda-developers.com/showpost.php?p=11535969&postcount=151
and/or go to the top to try again.
Note: Do NOT use your Nook to format the SD card after installing CM7. There’s a bug and it will format /boot instead, returning you to the black screen problem and you’ll have to repeat the process. This is TRUE WITH PHONES AND THE NOOK COLOR
Thanks again to everyone's contribution - I do not own the rights to any of this and am not the original finder/creator/designer of any of these tips and tricks.
Sorry you feel that way about Mac users. I will get the information from somewhere else.
Simply one of the best tutorials out there. So many of the custom roms overlook the documentation.
I am stuck on the boot logo ( the part where the android is being scribbled in directly after i plugged in the nook cable after first loading the sd card with winimage. It never goes past halfway on the scribble animation, and i am wondering if I may have done something wrong. Please reply.
You may need to go through the steps again to get it to work, it shouldnt hurt anything to do. Also try to write a different winimage and a different size download. If you have bigger than a 1gb card, i recommend getting the 1gb image file
first post on nook forum just order one after reading for 2 weeks about development cant wait to get it and use this guide to root it...
I'm guessing when you say format sd card your means fat 32 correct? Also once done with everything do you suggest to parition sd card to allow a2sd or data2ext? Our use titanium back up when updating rom...
I actually dont usually use titanium back up but if you want to partition and use titanium backup, cm 7 will defenitely support it. Format in fat 32 definitely. Luckily now CM7 has fixed the D-Link issue so you should be good on text editing and the whole process should be expedited alot with how hard Cyanogenmod team has worked to make a pretty flawless copy of CM7 for Encore (Nook Color). Im running CM7.02 and it is fast, sleek and sexy!
v/r
Drew
I tried this on my nook color and when it booted it showed the default nook icon with the adobe copyright warning, for a second, then it showed a cyanogen mod logo for a second then a screen that said install failed reboot to try again. I thing that some part of the nook android is still there and is messing up the CM install. Any ideas?
candreasen said:
I tried this on my nook color and when it booted it showed the default nook icon with the adobe copyright warning, for a second, then it showed a cyanogen mod logo for a second then a screen that said install failed reboot to try again. I thing that some part of the nook android is still there and is messing up the CM install. Any ideas?
Click to expand...
Click to collapse
First, what version is your Nook Color? These are outdated steps and files. Second, this is rooting (gaining superuser access and installing apps) and not installing CM7 or a custom rom. Can you tell us what exactly you did so we can try and help out more?
It is the BNRV200. I believe it had the latest BN firmware because I got it about 2 weeks ago.
drewbacca said:
Now to install CM7!!!!!!!!!!
Click to expand...
Click to collapse
This seems to say otherwise about the installing CM7.
candreasen said:
It is the BNRV200. I believe it had the latest BN firmware because I got it about 2 weeks ago.
This seems to say otherwise about the installing CM7.
Click to expand...
Click to collapse
If you're installing CM7, go here and read about the new partition guide since you probably have the new partition on yours.
http://forum.xda-developers.com/showthread.php?t=1030227
If you're rooting, go here. (You can also re-partition, go back to stock then root.)
http://forum.xda-developers.com/showthread.php?t=1054027
Folks, I am trying to root my NC for the first time. I am following the instructions found here:
http://forum.xda-developers.com/showthread.php?t=942424.
I cannot get WinImage to write to the disk. I downloaded auto-nooter-3.0.0. It is about 125 Meg when unzipped. I open Winimage just fine, and point to the .img file. When I try to do the "Restore Virtual Hard Disk Image", it asks me for a VHD file. I checked all the folders I installed, and cannot find a .vhd file anywhere.
I did point it back to the image file and it says it cannot write it because the file is in use...
I also tried the alternate windows application, Win32ImageWriter. No good. It errors out as well. Gives me an undocumented error code: error 8.
There must be something wrong with my setup, but I cannot figure out what it is. I have a brand new MicroSD card, 8GB. The card is visible in windows explorer and it shows empty...
Any help would be appreciated.
Jim
Error 8 means you have to run win32imagewriter as administrator.
Using Win Image 32
Jim,
EDIT: use whatever version of Clockwork Mod that is recommended for the purposes that you are trying accomplish. The one I listed below may not work with what ever you are doing.
I had similar issues when I started to use it, also.
The following is info from another post I made on installing a rom to the Nook. Formatting the XD card with SD Formatter 3.0, and then using version 0.1 of Win Image seemed to be the answer.
A) Download the following software to your PC/MAC for formatting your XD card. This is the best one that I have found.
SD Formatter 3.0 for SD/SDHC/SDXC:
- Format your XD card. This step is very important to correctly write the EXT4 compatible bootable SD recovery.
B) You will need “Image Writer for Windows”
- I found that the “0.1 (truckstop) release” worked the best. The newer version seemed to always have some problem.
- Paste the unzipped folder to you C:\ directory. Put the EXT4 compatible bootable SD recovery file in the same folder. This will help prevent issues. This software is originally intended for a Linux environment and thank you to the developer for making it compatible with Windows.
- Make sure that the chosen device is your XD card. It automatically selects the correct one, but you never know. Go to “my computer” in windows and check to see what Letter has been assigned.
- Choose the EXT4 compatible bootable SD recovery file from Image writer directory.
- Click the “write” button. This will take a few minutes to finish.
- Now you can copy misc files to the flash drive. It is ready to boot your Nook into Clockwork Mod Recovery.
They don't trust me yet on this site, so I cannot post links to other sites. The required links are in my original post: http://forum.xda-developers.com/showthread.php?t=997764
Let me know it this helps.
SUBCAN
Solved: cannot write SD image
solved...
Thanks to both Subcan and n1bsbri for the replies. The one that put me on the right track was N1's statement that I had to run as admin. I was running as admin, but obviously I did not have write permission. I then just tried to write something to the card using dumb old windows explorer and found that the card was write protected.
I am embarrased to admit it took me hours to find a post that highlighted the fact that on some microSD adapters you had to tape (yes, good old Scotch Tape) over the switch to get it writeable. I did that, wrote the card, and the NC booted right up.
I cannot begin to tell you how many bad words it took me to figure that out...
Thanks to both of you for your replies. I am very new at this and I know I will have more questions... thanks for getting me over the hump!
Jim
I keep seeing SD card rooting questions. I'm providing a link to some guides that describe in gory detail how to get CM7 up and running on an SD card (for both MAC OSX and PC). These guides are built off of verygreen's size-agnostic SD card thread and he deserves any and all credit. All that I (DrAstro) and DrWho have done is expound on the easy-to-follow steps that he provides from the perspective of trying to teach someone who is only mildly computer literate.
http://clubnook.com/forum/showthread.php?953-Rooting-Instructions
If this helps, go to verygreen's SIZE AGNOSTIC card thread and give him thanks.
I've just copied and pasted directly from Clubnook in case people don't want to link over there. If this is useful for you, comment and I'll keep it updated. If not, just let it fall into the ether...
CM7 - SD Card - Mac Version
INSTALLING CM7 (CyanogenMod 7/Android 2.3) ONTO A MICROSD CARD FOR USE WITH NOOK COLOR
Thanks to DrAstro for the following instructions:
I used the instructions from verygreen (who deserves any and all credit):
http://forum.xda-developers.com/show....php?t=1000957
I did nothing other than follow exactly what he said to do and was up and running with full android market access in about 10 minutes (with a 5 minute nap in the middle!). It was literally that easy. I’ve just expanded, in gory detail, on the basic.
Basically, what you are doing here is taking a microSD card, making it so that the nook color can boot from it, putting a new OS on that card (CM7) and then adding the android market. At the end, you will be able to run a more tablet-like experience from your microSD card without doing anything to the internal software that BN put on there. Here are steps, with heavy borrowing from verygreen’s guide. Hopefully you will read and understand what you are doing, so that you can pick and choose which OS zip you want to use.
NOTE: These are mac specific instructions, as that’s what I used!
1) Downloaded the following files and put them on your desktop:
generic-sdcard-v1.2.1.img.gz
(http://nook.handhelds.ru/sdimage/gen...-v1.2.1.img.gz) - This file makes your SD card bootable. This is probably the “hardest” part of the process as you have to “burn” this image to the card, not just “drag and drop”
update-cm-7.1.0-RCO-encore-2.6.32-beta3.1.zip
(http://coachz.inetpro.org/~dalingrin...32-beta3.1.zip) – This is the latest beta version of CM7 that was available at the time I did this! There may be some instability, but they fixed the battery issues with this release so the tradeoff is worth it.
Or get the latest stable version update-cm-7.0.2-encore.zip
(http://tinyurl.com/3vyanhh)
gapps-gb-20110307-signed.zip
(http://wiki.cyanogenmod.com/index.ph...Latest_Version) – This was the latest google apps version that was available when I did this. It will give you access to the android market!
2) Get any microSD card that you don't mind trashing the data on. There a LOTS of options out there, but I would HIGHLY SUGGEST getting a SANDISK, CLASS 4, 8 GB or 16 GB card. It is by far the most likely card to work well for you.
Also get a reader for your microSD card. I got one that plugs into my USB port and lets me see my microSD card on my desktop.
3) The first step is to install the .img file to the microSD card. First, you need to double click it on your desktop and let mac osx unzip it for you. It should do this nicely and your resultant file will be:
generic-sdcard-v1.2.1.img (i.e. the .gz at the end will go away)
To install the .img onto the microsd card, put the micro sd card into your card reader. It should pop up on your desktop as a disk. Mine was called “no name”.
To write the image (called burning the .img file to), you need to do the following:
-Find which drive the sd card is mapped to. To do this on mac, you can use the terminal:
how to open the terminal:
a) Go up to the magnifying glass in the top right of your mac.
b) Click on it and search for the word “terminal”. The first thing it finds should be a little black box with the word Terminal.
c) Click on that and a window should open on your desktop. That window should say something like Terminal – bash – 80x24 in the top line and then have a bunch of words, maybe something about Last login: and finally a line that ends in a dollar sign $. Here’s where you will type in your commands.)
Inside of that terminal, after the dollar sign ($) first, type:
cd Desktop
That will take you to your desktop. If you now type
ls
This should show you a list of all the files and folders on your desktop. All the terminal does is let you work with files using text commands rather than a nice graphical interface (i.e. clicking on windows and stuff)
Now that you know a couple basics on “terminals” type this:
diskutil list
This lists all the spaces on your computer where things are stored. You need to unmount the microSD card that you just plugged in. This will allow you to erase the card and put what you want on it. You need to look at this list and figure out which drive# is your microSD card. To the far right, you will see the disk size. Your microSD card should be around that same size as what you bought (for example, I’m using an 8GB card and found the disk that was around 7.5 GB).
Once you know the right disk (mine was disk1, yours may be different) unmount that drive by typing this:
diskutil unmountDisk /dev/disk<#>
(to be explicit, my drive was disk1 so I typed: diskutil unmountDisk /dev/disk1)
It should say: Unmount of all volumes on disk<#> was successful
Next type:
dd if=generic-sdcard-v1.1.img of=/dev/disk1
Everything needed should copy right over to the card. It took my laptop 140 s.
Now unmount the microSD card, but NOT the same way as what you just did. How? Remember when you connected the microSD card and a folder popped up on your desktop? Right click on that and select “unmount”. Note, it might be the case that the folder was renamed “boot”. If that’s the case, that is the folder to unmount.
After the microSD card disappears from your desktop, remove your microSD card from the laptop and plug it back in. The folder named “boot” should pop up on your desktop. Now the easy part.
Drag and drop the file:
update-cm-7.1.0-RCO-encore-2.6.32-beta3.1.zip or update-cm-7.0.2-encore.zip
Into the “boot” folder. Now right click on the “boot” folder and unmount.
Take out the microSD card and put it into the nook color. Turn the nook color on and it will boot. A little penguin might pop up followed by lots of techie looking things flashing on your screen. That’s fine. Keep an eye open and when its done, the screen will go blank. It should turn itself off, but probably won’t reboot. You need to hold down the power button for around 8 seconds to turn it back on. It will reboot into CM7.
(note: This is updated from prior CM7 installations (i.e. these instructions are specific to installing the CM7 beta). If your unhappy with the performance of the beta, you can install a CM7 version that’s labeled as “stable”. The stable versions occasionally need to be turned off manually (i.e. by holding down the power button for 8 seconds)).
You’re almost there. You should have a homescreen with a few icons. Find the one labeled “settings”. Open this up, go to Wireless & networks, and connect to your wireless network. Now CM7 is ready to go online and you can turn off the nook color and install the Android Market.
You need to turn off the nook color. Take out the microSD card and connect it to your computer again. This time, two folders will pop up. One called “boot” and one called “sdcard” or something similar
This time, drag and drop:
gapps-gb-20110307-signed.zip
into the boot folder. Now comes the second hardest part, booting into recovery. The process depends on the version you are installing.
If you are installing the beta version I reference above then put the microSD card into the nook color and boot into CM7. Once you’re in CM7, hold the power button until a menu pops up and choose to “reboot”. Choose to reboot into “recovery” and you should be all set.
If you’re installing one of the “stable” versions, put the microSD card into the nook color and boot to Recovery Mode. In order to do this hold the nook N key and press and hold the power button for ~5-6 seconds. It may take a couple of tries. The screen may turn off a couple times. You may boot into CM7 a couple times. Eventually, with luck on your side, you will successfully boot into “recovery mode” and google apps will be installed. Once you manage to boot into recovery the screen will flash up lots of techie text, similar to when you started CM7. It should go blank when this is done. At this point you can turn it off by holding power for around 8 seconds. Turn it back on, follow the screen instructions and you should be good to go with an android tablet with the full android market, all running from your microSD card!
Setup Wizard stuck?
I actually got this working on the first try a couple weeks ago and it was fantastic!
I was able to play netflix and flash for the first time, and now my dad wants me to do his nook the same way. He has a 16GB sd card though, and the original instructions didn't work on >8gb cards. I can't just image his SD card to my SD card because I couldn't get my google account to de-register etc, so I started from scratch with my card and planned to image to his before configuring any user accounts.
I'm having repeated trouble with my retry attempt though
Basic CM7 install with the generic-sdcard-v1.2.1 and update-cm-7.1.0-RC0-encore-2.6.32-beta3.1 (the ones recommended as of today in the instructions)
I set up wireless access, shut down, and backed up my card at this point.
Copy the current 20110307 gapps to the boot partition, eject, put it back in the nook, boot into recover (I've gotten good at this), it installs, shut down. Back up my card again as I figure this is where I'll want to start the other card.
Back to the Nook, boot up, get past the CyanogenMod scateboard screen, and it goes to "Setup Wizard". This should be for setting up the Google Apps Marketplace account I think, except it's completely black except for grey bar across the top with "Setup Wizard" on it, and the bar across the bottom with menu/back/search/battery indicator etc (these do nothing).
I can press power button and get only two options: shut down the tablet or reboot the tablet. I can rotate the nook and the UI changes orientation. Nothing else does anything as far as I can tell.
Anyone else seen this problem? I've searched, and even tried to post to the dev thread, but I can't due to low post count.
Help! (and thanks in advance!)
*.gz img file not recognizable & not zipped
Hi. I rooted my Nook with Autonooter and love using it. YouTube and all work fine, but I would like to redo with CM7. I have all that I need, except I'm caught with the img file this time round. It has an extension .gz. Win32DiskImager does not recognize it. Some sites say that it needs to be unzipped, but it's not zipped. I hate being stuck before even beginning. I hope that you can explain why I'm having this trouble. TY!
The .gz file is just a compressed .img file.
There are a number of Windows apps that can de-comress the file, for example: 7-Zip
Martyn
Hi Martyn, Thanks again. Now, DiskImager is coming up with an error when I try to write. It says that there is not enough space on the disk. The unzipped img file shows to be 117megs, while my SD card is 16gigs. After I got the error, I chose to format the disk but have the same error. Do you mind to help again?
I saw this suggested: "I did a full format (not quick) and used WinImage to write the SD card instead. Works every time since then," by TL Jester here. I"m just curious why there always seems to be a roadblock.
sGooss said:
Hi Martyn, Thanks again. Now, DiskImager is coming up with an error when I try to write. It says that there is not enough space on the disk. The unzipped img file shows to be 117megs, while my SD card is 16gigs. After I got the error, I chose to format the disk but have the same error. Do you mind to help again?
Click to expand...
Click to collapse
I had this same problem, i discovered that it created a partition on the sd card... I had easeus partition master home edition, which i used to resixe the partition and you can see your full 16GB then.
sGooss said:
Hi Martyn, Thanks again. Now, DiskImager is coming up with an error when I try to write. It says that there is not enough space on the disk. The unzipped img file shows to be 117megs, while my SD card is 16gigs. After I got the error, I chose to format the disk but have the same error. Do you mind to help again?
Click to expand...
Click to collapse
I had an error message like this too. It turns out it was because I was trying to use the internal card reader in my laptop. I bought an external USB card reader, and it worked fine with the same card.
Originally Posted by sGooss View Post
Hi Martyn, Thanks again. Now, DiskImager is coming up with an error when I try to write. It says that there is not enough space on the disk. The unzipped img file shows to be 117megs, while my SD card is 16gigs. After I got the error, I chose to format the disk but have the same error. Do you mind to help again?
babyfine24 said:
I had this same problem, i discovered that it created a partition on the sd card... I had easeus partition master home edition, which i used to resixe the partition and you can see your full 16GB then.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Ditto, same problem, same solution. When you write the image to the card it seems to create a default boot partition of 117mg. When I tried to put both the rom and gapps in the boot partition after writing the image, I got that message (but not every time). So I made the boot partition bigger before adding rom and gapps, using Easus. I increased it to 150mg or so, that was plenty.
One time image+rom+gapps barely fit in the boot partition, and while installing I got an error that said not enough space in disc. I redid it, making the partition bigger, and it worked. I think the installation process may temporarily use some of that boot partition space.
Is there any way to duplicate an SD card install for my Nook Color? I have the latest Cyanogenmod nightly on an existing card but I can't seem to burn a new nightly starting from scratch. The new nightlies all update the existing card. I figure if I can just duplicate the existing, working card I can update it.
As a side note the new installations all give me an endless reboot at the cyanogen logo. I am using Win32Disk Imager, generic-sdcard-v1.3-CM7-9-10-10.1-10.2-11-largest-Rev8b.img, and can't get past this reboot loop. The cards all had working installs on them previously so I know there is not a compatibility issue with them.
Thanks in advance
f1jim
You can use win32diskimager to make an image of the existing card and write that image back to a new card. But be warned, depending on the size of the existing SD, the image can be quite big (same size as the card).
On writing the new 8b image, are you letting it boot first to set up the partitions before you add the CM zip? Also, you said those cards had working installs on those before writing the image. Did you format the card first using SDFormatter? You need to to clear the prior installation. Use size adjustment and overwrite options too.
Sent from my SCH-i705 using XDA Premium HD app
Thanks
I will try your suggestion on booting first without the zip file.
Thanks
f1jim
leapinlar said:
You can use win32diskimager to make an image of the existing card and write that image back to a new card. But be warned, depending on the size of the existing SD, the image can be quite big (same size as the card).
On writing the new 8b image, are you letting it boot first to set up the partitions before you add the CM zip?
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
f1jim said:
I will try your suggestion on booting first without the zip file.
Thanks
f1jim
Click to expand...
Click to collapse
see my edit above. You need to format the sd first.
Sent from my SCH-i705 using XDA Premium HD app
I formatted the SD card, used Win32DiskImager, took the card out of the machine, reinserted it, inserted it in the Nook, It did it's thing till it got to the line that looks for the file starting with CM or ends in zip. It goes no further and just flashes a cursor. I take the SD card out of the nook and with it in the PC copy the nightly zip. I then insert it in the Nook and boot up. It appears to be installing everything then shuts down.
I reboot and it starts the reboot cycle over and over. Am I missing a step in the process?
Also I open Win32DiskImager and don't see a way to copy the working SD install. Seems like it only will read and write .img files.
Thanks
f1jim
Win32diskimager is not supposed to copy the install. It is supposed to create an image (read the card to an img file) of the existing SD. Then use it to write that img file back to a new SD.
And when you formatted you used SDFormatter with the options I suggested? If you did not, then you only changed the SD headers and did not erase the prior data and it is still there when the SD partitions itself.
Sent from my BN NookHD+ using XDA Premium HD app
I can't figure out how to get Win32DiskImager to make an image of the existing install. I see no menu selection to allow this. Are you sure you are not thinking of another program.
Or am I not seeing something obvious?
f1jim
leapinlar said:
Win32diskimager is not supposed to copy the install. It is supposed to create an image (read the card to an img file) of the existing SD. Then use it to write that img file back to a new SD.
And when you formatted you used SDFormatter with the options I suggested? If you did not, then you only changed the SD headers and did not erase the prior data and it is still there when the SD partitions itself.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
f1jim said:
I can't figure out how to get Win32DiskImager to make an image of the existing install. I see no menu selection to allow this. Are you sure you are not thinking of another program.
Or am I not seeing something obvious?
f1jim
Click to expand...
Click to collapse
Yes the obvious thing you are missing is the read button. The read/write buttons mean read or write the card. When you press the write button with the 8b image file in the box, it writes that image to the card. When you select the read button, it reads the card and makes a new image file that you have typed into the name box. The new image file will be the same size as your whole SD. Then you can use that new image file to write to a new SD. It does not guarantee that the new card is bootable though. Just try it.
You did not answer my question about using SDFormatter.
Sent from my BN NookHD+ using XDA Premium HD app
When I run the program the box that opens says image file and a white box that's empty below it. To the right of that box is a blue navigation button that allows one to navigate to an .img file. Still farther right is a device box that only allows the selection of my removable SD drive. The read and write buttons are grayed out till I select an .img file in the white box. Since my current useable SD card had no .img file on it how do you propose I select the SD card to write an image of?
Honest, I have looked this over with a fine toothed comb but cant see how to select my SD card to write an image. The blue selection box will only look for .img files. Till that happens nothing else is an option.
I have been formatting the SD card with Mini Tool Partition Wizard. I format the SD card using Fat32. After that the PC sees it just fine. I will look for SDFormatter and use it.
Sorry if I am overlooking something that should be obvious to me. Your help is greatly appreciated.
f1jim
leapinlar said:
Yes the obvious thing you are missing is the read button. The read/write buttons mean read or write the card. When you press the write button with the 8b image file in the box, it writes that image to the card. When you select the read button, it reads the card and makes a new image file that you have typed into the name box. The new image file will be the same size as your whole SD. Then you can use that new image file to write to a new SD. It does not guarantee that the new card is bootable though. Just try it.
You did not answer my question about using SDFormatter.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
What happens when you type a new file name in the box? Does the read button come ungreyed? Pick a location and type a name like mycard.img.
And as I told you, unless you use SDFormatter with the overwrite and size adjustment on, you are not really formatting, just writing new headers.
Sent from my BN NookHD+ using XDA Premium HD app
I used the name "test" and yes, the read button became ungreyed. I hit read and it continued for awhile until an error message popped up at 3%. It says "An error occurred when attempting to read data from handle. Error 1117: The request could not be performed because of an I/O device error. Tried it twice. Same outcome.
f1jim
leapinlar said:
What happens when you type a new file name in the box? Does the read button come ungreyed? Pick a location and type a name like mycard.img.
And as I told you, unless you use SDFormatter with the overwrite and size adjustment on, you are not really formatting, just writing new headers.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Since it is obvious you are going to continue to have issues with this method, I suggest you abandon that and use one of the two below.
1. Use SDFormatter with the size adjustment and overwrite options selected. This truly erases everything on the SD. Other methods, including Mini-Tool, just 'quick erase', leaving old data there when it re-partitions itself back to the old partition structure. So when CM tries to run it has the old data from your prior install and hangs.
Or
2. Go to my NC Tips thread linked in my signature and get the Alternate CWM from item B5. After you have burned the image and let it boot the first time to repartition itself and installed the CM zip, install the Alternate CWM and boot to it. Use that to do a wipe data/factory reset. That clears your old data from your old install so CM can boot properly. If it still hangs using this method, you may have to go to mounts and storage and format /system. Then re-install CM using the copy to boot partition method, not the Alternate CWM.
Sent from my BN NookHD+ using XDA Premium HD app
Once more......
I'll give this a try once again. There has to be something obvious I am overlooking. I have 2 SD chips that have previously worked with android installations on them. Following your advice this is what I have done with both of them and with no success:
I have formatted each chip with SDFormatter using the OVERWRITE and AUTO SIZE options turned on. I then use Win32DiskImager to burn the image generic-sdcard-v1.3-CM7-9-10-10.1-10.2-11-largest-Rev8b.img. I then copy the latest nightly to the root directory and boot the chip in the Nook Color. It appears to go through the setup process and shut down properly. Upon rebooting the nook color it comes up to the Cyanoboot Universal Bootloader and says loading. Then the screen goes dark and it reboots back to the Cyanoboot Universal Botloader screen and reboots yet again. It seems stuck in this loop. Same issue using both SD chips.
I'm utterly lost.
Thanks
f1jm
leapinlar said:
Since it is obvious you are going to continue to have issues with this method, I suggest you abandon that and use one of the two below.
1. Use SDFormatter with the size adjustment and overwrite options selected. This truly erases everything on the SD. Other methods, including Mini-Tool, just 'quick erase', leaving old data there when it re-partitions itself back to the old partition structure. So when CM tries to run it has the old data from your prior install and hangs.
Or
2. Go to my NC Tips thread linked in my signature and get the Alternate CWM from item B5. After you have burned the image and let it boot the first time to repartition itself and installed the CM zip, install the Alternate CWM and boot to it. Use that to do a wipe data/factory reset. That clears your old data from your old install so CM can boot properly. If it still hangs using this method, you may have to go to mounts and storage and format /system. Then re-install CM using the copy to boot partition method, not the Alternate CWM.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
f1jim said:
I'll give this a try once again. There has to be something obvious I am overlooking. I have 2 SD chips that have previously worked with android installations on them. Following your advice this is what I have done with both of them and with no success:
I have formatted each chip with SDFormatter using the OVERWRITE and AUTO SIZE options turned on. I then use Win32DiskImager to burn the image generic-sdcard-v1.3-CM7-9-10-10.1-10.2-11-largest-Rev8b.img. I then copy the latest nightly to the root directory and boot the chip in the Nook Color. It appears to go through the setup process and shut down properly. Upon rebooting the nook color it comes up to the Cyanoboot Universal Bootloader and says loading. Then the screen goes dark and it reboots back to the Cyanoboot Universal Botloader screen and reboots yet again. It seems stuck in this loop. Same issue using both SD chips.
I'm utterly lost.
Thanks
f1jm
Click to expand...
Click to collapse
Nightly of what, CM11? And what date? A fresh download?
And as the text is scrolling past are there any error messages? Are you installing in two steps? In other words are you letting it boot first to make the partitions followed by copying the CM zip and booting again?
Sent from my BN NookHD+ using XDA Premium HD app
Once again
Yes, the nightly CM11. cm-11-20140510-NIGHTLY-encore.zip to be exact. Yes, fresh downloiad. I will try to boot to the chip before copying over the nightly this time.
Fingers crossed.
f1jim
leapinlar said:
Nightly of what, CM11? And what date? A fresh download?
And as the text is scrolling past are there any error messages? Are you installing in two steps? In other words are you letting it boot first to make the partitions followed by copying the CM zip and booting again?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
No luck.
This time I started from scratch again. Formatted the chip with SDFormatter(4.0), Used a fresh downloaded copy of the generic img file. Botted it in the Nook. No error messages and it stopped at the place where it looks for the zip file. Pulled the chip, copied a fresh download of the CM11 nightly. Popped in the chip and started up the Nook. It went through the installation process with no error messages and properly shut itself down. Rebooted the Nook only to have it load the Cyanoboot universal bootloader page, says it's loading....then it goes black and reboots to the same bootloader page.
Any more ideas that don't involve dynamite?
f1jim
f1jim said:
This time I started from scratch again. Formatted the chip with SDFormatter(4.0), Used a fresh downloaded copy of the generic img file. Botted it in the Nook. No error messages and it stopped at the place where it looks for the zip file. Pulled the chip, copied a fresh download of the CM11 nightly. Popped in the chip and started up the Nook. It went through the installation process with no error messages and properly shut itself down. Rebooted the Nook only to have it load the Cyanoboot universal bootloader page, says it's loading....then it goes black and reboots to the same bootloader page.
Any more ideas that don't involve dynamite?
f1jim
Click to expand...
Click to collapse
Before doing anything drastic, read this.
http://forum.xda-developers.com/showpost.php?p=52506409&postcount=283.
Once again....
I most definitely have a Nook color. I think I mentioned early on I have a chip with the latest nightly on it and it works beautifully. The other chips used to as well. I just can't figure out why they stopped working when I tried to start from scratch with them.
I do appreciate your efforts in helping. It's not the end of the world if I can't get them to work. I'll keep trying.
f1jim
hwong96 said:
Before doing anything drastic, read this.
http://forum.xda-developers.com/showpost.php?p=52506409&postcount=283.
Click to expand...
Click to collapse
f1jim said:
This time I started from scratch again. Formatted the chip with SDFormatter(4.0), Used a fresh downloaded copy of the generic img file. Botted it in the Nook. No error messages and it stopped at the place where it looks for the zip file. Pulled the chip, copied a fresh download of the CM11 nightly. Popped in the chip and started up the Nook. It went through the installation process with no error messages and properly shut itself down. Rebooted the Nook only to have it load the Cyanoboot universal bootloader page, says it's loading....then it goes black and reboots to the same bootloader page.
Any more ideas that don't involve dynamite?
f1jim
Click to expand...
Click to collapse
What are the sizes of these two chips you have used previously? You know CM11 requires larger chips.
Sent from my BN NookHD+ using XDA Premium HD app
Once again....
Both chips are 8Gb. The one that is working properly is 16Gb.
f1jim