Related
Right, can someone give me a quick set-by-set of what to do from my position.
I can access HBOOT fine (HBOOT-1.33.2005 / RADIO-2.22.23.02) and i can access my System Recovery fine (RA-dream-v1.7.0), but i can't boot to my Rom.
I have the following on my desktop:
HBOOT-1.33.0013d
RADIO-2.22.27.08
gapps-tiny-112010 (that the right one?)
froyobylaszlo-5.1 (from: http://forum.xda-developers.com/showthread.php?t=929678)
If my thinking is right, i need to:
- Delete the rom etc. that i installed wrong
- Move the files from my desktop onto my SD
- Install everything
- Boot
However, i'm not sure how to go about that... So this is where i need the simple instructions and advice.
**There was a serial0 question before, so ignore the first few posts.
Seems it's because i was using RC29 instead of RC7...
Soon as my phone has charged, i'll flash the rom
New issue:
Need some help people. Rooted my G1, worked. Got it back to 1.5, then updated it all. Installed the Recovery.img and that worked. Now, i want to install this:
http://forum.xda-developers.com/showthread.php?t=929678
But im not sure what radio, SPL and gapps to use. I followed this video:
http://www.youtube.com/watch?v=DR0HpUVv-BY
Then when he installed Cyanogen, i installed Gingerbread. Now im stuck on the boot screen and have been for 2 hours... ideas?
I'm thinking the files i used, from the video, ain't compatible. So, anyone have links to "SPL: 1.33.0013d (hboot)" and "RADIO: 2.22.27.08 / 28.25"? Then, what do i do from the Recovery screen to delete all i did and install Gingerbread?
wow you are in a rush to take the G1 all the way to the hilt arent ya?
What roms have you successfully run on it prior (if at all) to trying to flash Lazlo? Did Eclair work?
I ran Cyanogen6 for a long while till it developed a slight lag. In all i've ran:
Cyan6, then 1.6, then Cyan6, then 1.6 again, now im trying this.
I created the 3 - 4 Partition, THEN the 2 - 3 Partition.
Think that could be the issue?
If so, how do i go back and try again?
**NEW QUESTION FROM HERE
dmreall said:
Right, can someone give me a quick set-by-set of what to do from my position.
I can access HBOOT fine (HBOOT-1.33.2005 / RADIO-2.22.23.02) and i can access my System Recovery fine (RA-dream-v1.7.0), but i can't boot to my Rom.
I have the following on my desktop:
HBOOT-1.33.0013d
RADIO-2.22.27.08
gapps-tiny-112010 (that the right one?)
froyobylaszlo-5.1 (from: http://forum.xda-developers.com/showthread.php?t=929678)
If my thinking is right, i need to:
- Delete the rom etc. that i installed wrong
- Move the files from my desktop onto my SD
- Install everything
- Boot
However, i'm not sure how to go about that... So this is where i need the simple instructions and advice.
**There was a serial0 question before, so ignore the first few posts.
Click to expand...
Click to collapse
froyobylaszlo-5.1 needs radio 2.22.27.08/2.22.28.25,spl 1.33.0013d,flash your radio&spl first
Got Cyanogen6 working on it now.
I downloaded HBOOT-1.33.0013d and RADIO-2.22.27.08, zipped them, then moved them onto my SD card and when i try flash them on my G1, it's says invalid file.
dmreall said:
Got Cyanogen6 working on it now.
I downloaded HBOOT-1.33.0013d and RADIO-2.22.27.08, zipped them, then moved them onto my SD card and when i try flash them on my G1, it's says invalid file.
Click to expand...
Click to collapse
have u tried the guide from here to update your radio and spl
(p/s u need to follow it properly and understand most of the jargons such as spl perfect or engineered and etc)
http://forum.xda-developers.com/showthread.php?t=831139
Ok, so going by that i need to:
- Put them files onto my SD (not zipped, just as they are downloaded and into the root)
- Boot into fastboot
- Enter Console and type:
Code:
fastboot flash recovery recovery-RA-dream-v1.7.0-cyan.img
fastboot flash radio radio-2.22.27.08.img
fastboot flash hboot hboot-1.33.0013d.img
fastboot reboot-bootloader
- Check it says "1.33.0013d" as its version
- Enter console again and type:
Code:
fastboot erase system -w
fastboot erase boot
- Restart
- Boot to Recovery
- Go to "Flash"
- Select "Froyo by Laszlo"
- Reboot
Am i right with that method?
Need to know before i risk it
Just install yoshi ginger its so smooth (gingerbreab 2.3)
sent from my gingerdream
dmreall said:
Am i right with that method?
Need to know before i risk it
Click to expand...
Click to collapse
In theory it is already right. Maybe some small litte details.
After fastboot erase(before flashing rom), u should partition your sdcard so that it has the ext4 partition ( from recovery, partition sd, follow steps, upgrade from ext2 to ext3, upgrade ext3 to ext4 )
After that try using the wipe and reset all data to factory.
Now maybe u are good to go with flashing roms.
For the radio/hboot guide, just follow step by step from the thread.
This better then? I just want to make a guide for the future.
- Put "Recovery", "Radio" and "HBOOT" files onto SD (not zipped and into the root)
- Boot into fastboot
- Enter Console and type:
Code:
fastboot flash recovery recovery-RA-dream-v1.7.0-cyan.img
fastboot flash radio radio-2.22.27.08.img
fastboot flash hboot hboot-1.33.0013d.img
fastboot reboot-bootloader
- Check it says the Hboot that was just flashed as its version
- Enter console again and type:
Code:
fastboot erase system -w
fastboot erase boot
- Restart
- Boot to Recovery
- Go to "Partion SD"
- Partition SD with "Swapsize = 96" and "Ext2 = 1024" then "Ext2 to Ext3" then "Ext3 to Ext4"
- Go to "USB MS Toggle"
- Move Rom onto SD
- Go to "Flash"
- Select the ROM to flash
- Reboot
Click to expand...
Click to collapse
looks quite good, do u want to make a guide for the forum or just for urself?
If for the forum, maybe just add some small details as example :
boot into recovery ( hold power + home together )
Just for the new people without experiences in flashing.
No, this is for myself. Just trying to get a solid method i can reference to whenever im stuck.
Fastboot is "Power + Camera" yes? If so, i don't see a console.
Still need that one answered.
Also, should i put the files as .img or .zips in the root of my SD?
Fastboot can be accessed with camera and power or back and power.
You would move the files as zips.
A couple of notes. I wouldn't upgrade to ext4 as not all roms work with 4 (most do but not all) just go to ext3 and you will be good. If it supports ext4 then it will 3 also.
Also most of your guide is really only needed for the first time. if you are just switching roms you don't need to do half of that.
If just switching roms you only need to boot to recovery, wipe/factory reset, flash/install zip (depending on what the recovery calls it its the same thing). Reboot and enjoy.
Android G1 mobile software required (urgent)
Hi,
I have Htc G1 android mobile set.
The problem is my mobile phone only goes till G1 logo and does not proceed forward.
I think i have to flash my mobile set using micro SD card.
Can anyone plz share with me android G1 software and the method to do that.
I shall be grateful.
Regards,
Khurram
ok i set up ADB
Rooted the phone with Superboot
oem unlocked
flashed recovery-ra-nexus-v2.2.1
here's the problem
Next step i want to do is to install a custom rom.
So I try to do the following
"1. Download the ROM you want from our Nexus One ROMs section.
2. Turn off the phone.
3. Turn it back on by holding down Volume Down and Power until the bootloader screen comes up. Let it finish searching then select Recovery by using the volume buttons and click power to select.
4. Once the recovery screen comes up, select Nandroid Backup (to save a backup just in case, optional)
5. Then select Mass Storage On and plug your phone into the computer.
6. Copy the ROM .zip file to your phone’s SD card then unplug the phone.
7. Click USB MS Toggle."
Problem is i don't see nandorid backup, nor do I know where USB MS Toggle is located.
Rom is on my SdCard.
can i just flash Clockwork? :/
go for 4EXT. its the best out there nw.
http://forum.xda-developers.com/showthread.php?t=1419813
www.4ext.net
Sent from my Nexus One using Tapatalk
4ext is nice I use it now. did use amon_ra for 2 years no issues
don't like clockwork
if you go 4ext bu's are in clockwork backup folder
usb toggle should be on first ra screen under reboot now
nandroids or "backups" are under "backup/restore", however you should see nandroid folder on sdcard
if you just flashed a new recovery for first time did you remove this file to allow your recovery to stick--/system/etc/install-recovery.sh may be no issue for you at this point.
I'll try these out...
NP hit our thanks buttons if we helped
I managed to get into recovery and flash a rom, BUT....after I successfully install the rom and reboot. I just get a black screen that leads to nothing :/
Oh and the led buttons light up when i press the power button
Propably you just didnt wipe data. The entry is called something like format data/factory reset.
Sent from my Nexus One using xda premium
Did you follow this on installing recovery and removing stock recovery image as mentioned above, you can also remove it with root explorer if it is on phone
http://forum.xda-developers.com/wiki/Nexus_One/Recovery_Images#Installing_a_Recovery_Image
try to pull/reinstall battery and see if it boots
did you wipe all 3x with amon ra before flashing, should do system too--
http://dl.dropbox.com/u/28338566/Extreme-wipe.zip flashes from recovery
and I like sdformatter to format card then partition 1gb ext4 0swap
http://dl.dropbox.com/u/28338566/SDFormatter 2.0.mht
if battery pull don't work, pwr off and press trackball and pwr at same time and see if you can get into bootoader. there you can get into recovery, rewipe all 3x and reflash rom
did you check md5 with a a file mgr like es file explorer
what a2sd are you using, I prefer Dark Tremor beta4, flash it after rom and reboot, reboot again then with terminal emulator run the DT scripts as mentioned on Op of thread
worse case go back into adb/fastboot window and reflash recovery as per above link, wipe, and reflash rom
you can even wipe phone and fastboot rom thru command window by extracting the roms system and boot images and placing on sd card where you had ra recovery and fastbooting them--little more complicated and no need to try yet
just some ideas for now--
britemb 1332
Ok this is exactly what I have done from the start
Oem unlock
flashed recovery-ra-nexus-v1.7.0.1 (because the later ones don't work) through superboot
Went into recovery
I had previously formatted the sdcard with sd formatter as you suggested
converted ext2 to ext3
converted ext3 to ext4
-Did NOT use Dark Tremor, cause idk how to use it (don't understand instructions)-
wiped with Extreme wipe
flashed rom - Bugless Beast
reboot
and still black screen-led buttons light up and turn on and off as i press the power button.
hope that gives you a better idea of what i have done.
still no luck
can you get back to your stock rom
that recovery is too old
if so try ext4 from market or a pre 3.0 clockwork
am not sure why amon 2.2.1 won't fastboot
i did not use superboot so not familiar with it
i set up sdk/adb/fastboot--oem unlocked--fastbbooted amon ra--then flashed a rom with superboot in it
did you remove stock recovery
are you fastbooting the recovery or going thru a terminal on phone
i cannot go into phone and into market (as phone won't load)
I did NOT remove stocke recovery (link to file is broken)
and I am fastbooting the recovery
not sure what's wrong
you do have sdk installed? and when you type adb devices and fastboot devices you do see phone ID--?
and your images you fastboot are in your fastboot.exe folder ie "tools" for
it must be all correct or couldn't have fastbooted old recovery--just asking
do you have a backup (nandroid) on sdcard and maybe even backup sdcard at this point--i put all by bu's on pc as soon as i bu to phone
not sure what the lights mean
can you boot in to fastboot screen as i mentioned above and see hboot you have--could be an hboot or boot partition issue
not sure i want to instruct you on that--you would have to get correct hboot to fastboot
here is amon 2.2.1 i used
http://dl.dropbox.com/u/28338566/AmonRa 2.2.1.mht
fastboot flash recovery recovery-RA-passion-v2.2.1.img
Could try
1) Boot into fastboot and plug into your computer.
fastboot erase system
fastboot erase recovery
fastboot flash recovery recovery-RA-passion-v2.2.1.img
here is passimg link if you want to go back to stock and start over
http://forum.xda-developers.com/showthread.php?t=1577114
I've done the Passimg method and nothing, still a black screen with the led buttons going on and off as you press the power button.
don't know--sorry
maybe google your problem
pull battery and leave out 15 minutes
try another battery
do you get vibrations when the screen goes off and any orange light
could be hardware
let's see what anyone else says
ezceazy said:
I've done the Passimg method and nothing, still a black screen with the led buttons going on and off as you press the power button.
Click to expand...
Click to collapse
make very sure that you name the file PASSIMG.zip and not PASSIMG.zip.zip cos windows hadles the files such way.
after that reboot into bootloader (power+trackball) and then choose Bootloader by pressing power button. nw your phone should detect the passimg.zip and should be reverted back to stock.
Sent from my Nexus One using Tapatalk
I DID IT!
Sorry for not replying, I've been trying to fix this phone since I posted this thread.
Ok what I did is i for some reason got to this page:
http://www.machackpc.com/restore-your-nexus-one-to-its-original-shipping-image/
Weird thing is I've tried this procedure before with no luck. This time it worked? who knows.......
Thank you all for the help and support
glad you got it---
I initially looked for a complete update guide on here and eventually found all the information I needed, but it was in multiple places and sometimes hard to find. After getting everything installed on my N1 I thought I would write a guide for other noobs like me that want to try out ICS or JB but would like a step-by-step guide. I hope that it is helpful. SpazeDog ROMs (both ICS and JB) are working wonderfully on my N1 - its a very nice update from CM7 with only minor issues so far.
Note: this was initially written specifically for SpazeDog roms, but as they have not been updated in a while I have provided links to other popular roms as well. If you would like to try a different ICS or JB rom this guide should work, just substitute with the appropriate rom and depending on the one you choose, you may also need to install Google apps.
If you looking at this guide and don't know the basics yet, check out the Newbie Friendly thread first.
Links to popular roms that will work using this guide:
Evervolv JB 4.2
Evervolv JB 4.1
CM 10, JB 4.1.2 by vijendrahs
CM 10, JB 4.2.1 by vijendrahs
Spazedog ICS/JB
Disclaimer: This guide involves making changes to your phone that potentially could brick your phone leaving it unusable. I am not liable for any changes you make or problems you may have with your phone. You should at least be familiar with entering commands using command prompt. This procedure will erase ALL the data on your phone. Make sure you have a backup of everything. A nandroid backup is highly recommended. Proceed at your own risk.
Before we get started make sure you have the following: a rooted Nexus One, a USB cable to attach your phone to a computer, and the Android SDK. If you are just now installing the Android SDK, open the SDK manager and make sure to install the "Tools" and in "Extras" the "Google USB Driver" are checked off and download them. Alternatively, you just download ADB and Fastboot (search this forum or google). If you have a Mac see this thread to get started with ADB and Fastboot.
If you Nexus One is NOT already rooted, then follow this guide from Cyanogenmod to root your phone. If you plan to use the adb commands below (they are optional) make sure you have usb debugging enabled: go to "Settings" → "Applications" → "Development" → enable "USB debugging."
Step 1 - Download everything you will need:
4EXTRecovery Updater - the first link will download the .apk to your computer or phone.
BlackRose - go down to bottom of the first post to "Attached Files" and download the latest BlackRose zip file. If you don't want to do it yourself, check out this thread to flash a pre-made partition scheme. Often the developers (Evervolv) will also have a partition schemes that you can flash via Fastboot from your PC as well.
Your rom of choice - go to the downloads section and choose which rom you would like to try. Download the zip installation file.
Since you will be decreasing the size of your partition that apps can be stored on consider something like Mounts2SD or AD2SDX to move apps to your SD card.
Step 2 - Install and use 4EXTRecovery Updater on your phone:
The easiest thing to do is go to the 4ext link above, download and install it, directly from your nexus one. You can also install it by copying the APK file to your SD card, then using a file manager to find it and install it or you can use command prompt by opening command prompt, cd to the location of the Android SDK tools, and then type in the following command (replacing "path" with the path to where the APK is located on your computer):
Code:
adb install /path/4EXTRecoveryUpdater.apk
After you have installed 4ext open the 4EXT Recovery Updater. Tap "Settings" → "Allow" superuser request → "Yes" to connect to 4ext to get new data. Now select "Online install/upgrade" → "Yes" assuming it detects your nexus one correctly → select and install the latest 4ext recovery (at the top of the list).
After 4ext has installed, it will have placed a recovery image on your SD card - find it (its called recover.img) and it should be located in SD/Download/4EXT_Recovery_Touch/ folder. Copy this to your computer in case something goes wrong later and you need to re-flash the recovery image!
After installation of the 4ext recovery turn off your phone and boot into recovery by turning off your phone, turning it on again while holding the trackball down. This will boot into the bootloader, then press the power button once, use Volume Down to select "recovery" and press the trackball to select. Alternatively you can use the command prompt:
Code:
adb reboot recovery
Your phone should now boot into the 4ext recovery menu. Before moving on make sure you have any important stuff backed up because you are about to erase your entire SD card! Select "tools" →“partition sd card” → “remove all partitions and start from scratch.” Then for the 1st partition select “1024″ for a 1GB partition (this will be where ICS will be able to put your applications & data). Select "skip" for the 2nd partition and for the swap partition. Finally select the system “ext4″.
Step 3 - Copy the Evervolv, SpazeDog, or whatever zip installation file you have chosen to your phone's SD card
Download the ICS or JB zip file above and copy it to the root of your newly formatted SD card.
Step 4 - Installing and using BlackRose to resize the system partition:
Download the BlackRose application and install it on your computer. (Alternatively people have made flash-able partition schemes that you can just flash from your PC - usually links and instructions are provided in the installation rom's thread, Evervolv's here. If you do have access to a computer you can check out this thread).
Make sure your nexus one is attached via USB to your computer.
Open the BlackRose application - it will install and reboot your phone. Then follow along as shown in this video to resize your partitions for a JB ROM.
If you plan to install the ICS rom then use the video above as a guide but use the numbers (sizes) for the different partitions as indicated below.
After BlackRose has installed you will need to restart the application. After it has started up and recognized your device select "apply stock/custom blackrose" by typing in 1 and enter.
Then select "custom blackrose" by typing in 2.
Then type "resize" when prompted.
Now you will need to change the sizes of the system partition to 220 for ICS or 260 for JB.
Change the cache size to 8.
Finally name the new system partition, either "ICS" or "JB" depending on what you plan to install.
Note: some people have reported having problems getting into recovery at this point (if not move on to step 5). If that happens, luckily for you, 4ext put a recovery image in the downloads folder of your SD card and if you did what I said in step 2 you saved it. Try reflashing that recovery image using fastboot (remember the one that was in SD/Download/4EXT_Recovery_Touch/ and was named "recovery.img"). Put your phone into the bootloader by turning off your phone, turning it on again while holding the trackball down. To reflash the recovery open command prompt and cd to the location of the Android SDK tools. Then type in the following command (replacing "path" with the path to where the recovery image is located on your computer):
Code:
fastboot flash recovery /path/recovery.img
If that does not solve your problems (inability to get into recovery) then I would recommend going back to the cyanogenmod wiki and installing Amon_Ra's recovery. Then you can use it to flash your installation zip.
Step 5 - Install JB or ICS:
Now turn your phone off and boot into recovery as you did in step 2.
4ext will load. Select "wipe/format" → "format all partitions (except sdcard)" and then also "wipe data/factory reset."
Now go back and select "install from sdcard" → "choose zip from sdcard" → and then select the ICS or JB zip you copied to the SD card in step 3.
Now either the ICS/JB installer will load or it will just install in one step. Just follow the prompts to install and enjoy.
Depending on the ROM you chose you may need to install Google apps (see the specific ROM thread for details) and will also likely want to flash an apps-to-SD script as mentioned above so you do not run out of space.
This method worked perfectly for me, hopefully it will work well for you as well. Enjoy.
Great work, your guide is amazing!!! I followeed it and ended with an infinite bootanimation , I'm trying to discover what I did wrong :fingers-crossed:, but the guide was superb!
diegolm said:
Great work, your guide is amazing!!! I followeed it and ended with an infinite bootanimation , I'm trying to discover what I did wrong :fingers-crossed:, but the guide was superb!
Click to expand...
Click to collapse
I am sorry to hear that. Can you boot into recovery or is that broken as well? If you can boot into ext recovery try selecting "wipe/restore" → "wipe data/factory reset" and then try to install BCM again. I probably should have added that above, I will do that now.
If your recovery is broken but you can get into the bootloader (holding down trackball while starting up), you should be ok. You will probably need to flash Amon_Ra's Recovery using Hboot as was described in the guide from cyanogenmod link above. If there is a way to directly hboot flash 4ext recovery I don't know how to do it. Then you can try installing BCM again from the Amon_Ra's recovery and re-install 4ext after you get everything working.
I tried the Texasice ROM and it worked, but I didn't like it! Later I tried again BCM and It worked! I dont know, maybe I did something wrong... Anyway thanks again for the guide!!
Does work the same if using fastboot method? Thx
Sent from my Nexus One using Tapatalk 2
intel415 said:
Does work the same if using fastboot method? Thx
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
I am not sure which part you are referring to, but, yes, a few of the above instructions could be replaced with fastboot commands.
The adb commands, instead using adb I can use fastboot commands right. That's what I used to root my n1 kinda familiar with fastboot. Thx
Sent from my Nexus One using Tapatalk 2
intel415 said:
The adb commands, instead using adb I can use fastboot commands right. That's what I used to root my n1 kinda familiar with fastboot. Thx
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
I used the adb commands above because you can use adb to reboot directly into recovery (fastboot you can only reboot normally or into the bootloader) and you can also use adb to directly install apk files - fastboot cannot do those two things - it is more for flashing images (recovery, roms, etc). In order for adb to work make sure you have usb debugging enabled: go to "Settings" → "Applications" → "Development" → enable "USB debugging."
Note that adb commands are not required - you can reboot into recovery and install the 4ext manually.
It won't let me post a link right now, but just google "adb commands" to find a list of all the commands you can use.
Hope that helps.
Thx. All I need it was to install black rose and partition it. Put zip on SD card wipe and flash. Installation was easier than I thought it would be lol
Also on ur guide you forgot to put 200 for the data part. You only had 220 and 16
Thx again got ics installed on my n1 smoother than cm 7.2
Sent from my Nexus One using Tapatalk 2
intel415 said:
Thx. All I need it was to install black rose and partition it. Put zip on SD card wipe and flash. Installation was easier than I thought it would be lol
Also on ur guide you forgot to put 200 for the data part. You only had 220 and 16
Thx again got ics installed on my n1 smoother than cm 7.2
Sent from my Nexus One using Tapatalk 2
Click to expand...
Click to collapse
Yeah, its not bad - glad you got it working! ICS has been smoother than cm 7.2 for me as well.
Blackrose didn't ask me about userdata - it just assumed that automatically after putting in 220 system and 16 cache... I'll make note of that in the guide so its clearer. Thanks.
Got the issue with not being able to get into recovery after step 4, but I don't have the recovery image to flash. Once the SD card was formatted in step 2 I don't have a download folder. I attached what is in my SD card right now. Help please.
Look for "recovery.img"
bobbyphoenix said:
Got the issue with not being able to get into recovery after step 4, but I don't have the recovery image to flash. Once the SD card was formatted in step 2 I don't have a download folder. I attached what is in my SD card right now. Help please.
Click to expand...
Click to collapse
Try to find if there is a "recovery.img" anywhere on your SD card, perhaps in the 4ext folder?
If you can't find it, do not worry, you can just go to the first page of this thread, click on the link labeled "follow this guide from Cyanogenmod" and then go to the section on how to download and install Amon_Ra's Recovery. Once you get Amon_Ra's recovery flashed you will be able to install any ROM of your choice.
You can reinstall the 4ext recovery later if you want.
c2med said:
Try to find if there is a "recovery.img" anywhere on your SD card, perhaps in the 4ext folder?
If you can't find it, do not worry, you can just go to the first page of this thread, click on the link labeled "follow this guide from Cyanogenmod" and then go to the section on how to download and install Amon_Ra's Recovery. Once you get Amon_Ra's recovery flashed you will be able to install any ROM of your choice.
You can reinstall the 4ext recovery later if you want.
Click to expand...
Click to collapse
OK I'm stuck on what the path name is suppose to be. I tried it every way I can think of. Can you take a look at my screen shot, and tell me where I'm going wrong? The recovery image is on my desktop, so I'm not sure what exactly I should be replacing "path" with. I tried it from the link, and how you have it in your note. You don't have the "/to/" after path as in the CM link.
Well I tried a couple more times, and I can get it to seemingly do it, but it just hangs on this: (see screen shot) I get no error, and if I try to enter recovery on the phone I still get the reboot to the android and triangle with the ! in it.
place the recovery under the folder which contains fastboot.exe and rename it to recovery.img
now use the command
fastboot flash recovery recovery.img from platform-tools directory
Sent from my Nexus One using Tapatalk
And right-click this folder while pressing the SHIFT key on your keyboard. Then choose "Open command window here".
n1newbie said:
place the recovery under the folder which contains fastboot.exe and rename it to recovery.img
now use the command
fastboot flash recovery recovery.img from platform-tools directory
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
tommert38 said:
And right-click this folder while pressing the SHIFT key on your keyboard. Then choose "Open command window here".
Click to expand...
Click to collapse
WOW Thank you both. I spent literally hours yesterday trying to get it to work. Tried your suggestions, and in five minutes it was up and running!
---------- Post added at 12:31 PM ---------- Previous post was at 11:33 AM ----------
I may have spoke too soon. I followed the instructions to the end. Installed the ROM, and rebooted, but now after the X I get the Spazdog splash screen with the big Z in the middle and green dots moving, but it stays there forever. I waited 20 minutes one time. Tried reflashing, but I get the same thing.
---------- Post added at 01:17 PM ---------- Previous post was at 12:31 PM ----------
Just giving an update on progress (in case someone else is in my boat too) Flashed back to stock GB. Reinstalled recovery, and reflashed Spaz. Got past the X, and the splash screen, but now it's stuck on the Android logo that looks like the night rider beam that goes across the word. Been there now for about 10 minutes.
You do have Blackrose, right?
Yep. Installed everything according to OP. I think it may be the partition sizes as I think flashing back to GB messed with them. It says 220 and 10, but after checking some threads, it looks like there is one missing (userdata). I tried flashing a custom GB from here http://forum.xda-developers.com/showthread.php?t=1214543&page=98 and I was able to install everything. Got it up and running, so I'm going to start over for ICS, or do you think I can flash one of these for ICS http://forum.xda-developers.com/showthread.php?t=1637166 , and then just flash the ROM after?
220/10 means that you have 220MB for system and 10MB for cache, everything that's left will be userdata, so it doesn't ask (total is ~436MB, so userdata will be ~206MB in that case).
In HBOOT you can check how large your partitions are, or you could use the FreeSpace app for example. Always make sure your system partition is large enough before flashing a ROM.
Hi all, I wrote a long-winded Tutorial to put Evervolv KitKat on a stock N1. I don't have a stock N1 (I stumbled all the way through this process and got done yesterday, was so excited I wrote this tutorial) and don't know how to get it back to stock, so I'm wondering if anyone who has one and has experience putting new ROMs on other devices would like to test this out and let me know if anything doesn't work as written. Please go ahead if you like and reply your updates! Once it's dialed I'll make it a thread in the N1 ROMs forum.
Here's the text:
How to put KitKat on a Nexus One (And have computing power & space to spare):
Things you'll need:
1. A Windows/Linux computer with internet connection, USB port, and terminal
2. A USB Cable
3. A Nexus One with the most recent stock gingerbread rom (Settings->about, look for Android 2.3.6 or GRK39F, else apply/google updates to get to that version)
Before you begin, note that you're playing with a generally safe form of fire, but when playing with fire, you may brick your phone. The maker of this guide and any sites you visit during the process assume no responsibility, the user assumes full responsibility for lost work and damaged or ruined phones. Your warranty will be voided about six times over. Save all your stuff somewhere, save apps with Titanium Backup (Google it) or something, and do a full Nandroid backup (Goog that too) before you begin. You will be fully wiping your phone and SD card multiple times. Make sure at every step of the process that your battery is at least half full. Running out of battery during an update can cause bricks. In this guide, “Boot” means standard boot, the way it normally turns on. Not hboot or fastboot or recovery.
I did part of this from a Windows7 computer on Cygwin and part on Ubuntu 12.04, each presented some annoyance but by far the greatest was due to my Linux ineptitude with PATH and Root. If you're trying the same, I've made an appendix for that.
It may help to have a brief conceptual overview of what you'll be doing in case you run into snags and have to step out of the walkthrough. Your N1 has a few basic parts: Internal memory that is chopped into 3 partitions: One for the system files (System) , one for the files that they will need to make during the first bootup and use in order to operate, along with your apps and their created files (Data) and one for temporary files that your OS and apps can regenerate (Cache). Somewhere in there it also has space for a Radio (that also includes some critical power functions, flashing a new radio is the easiest way to brick an N1 but we won't), as well as a Recovery partition and an Hboot&Fastboot partition. We will be messing with Recovery and Hboot. The virtual machine that turns all the friendly pseudo-english computer code into 1s and 0s for the processor to deal with is called Dalvik, named after a town in Iceland where some old dev's family is from. It has its own Cache (the VM, not the town, as there are no longer any fish in Iceland ). It's SOP to wipe Cache & Dalvik before and after applying any updates, and wipe Data (Factory reset) before applying most updates. Sometimes when my phone bogs I reboot to recovery and wipe caches just for funsies. This makes it take longer to boot the phone and to use each app just the first time after that, while the files are created fresh. The phone also should have an SD-Card. You should have or buy an 8+MB, Class 10 SD card. The class relates to read/write speed, anything less than 10 will noticeably slow your Nexus One's operation. Why?
Because we're going to put some of your operating system on the SD card. We're going to use a special recovery system (aka recovery ROM) called “4ext” to partition your SD card. Mine is 16GB, partitioned to 14GB for storage and 2GB to use as fake internal memory, where my system's Data and Cache live. The KitKat System files that normally live on internal memory's System partition are too big for a normal N1, so we'll use a special Hboot called BlackRose to repartition your internal memory so you can fit KitKat, and then after you first boot it up we'll use an app called Mounts2SD to install a startup script so that every other time you boot it up after that, it will know to find Data and Cache on the SD card. In order to install BlackRose, you'll need to be running CyanogenMod Rom as your main OS, and in order to do that you'll need ClockWorkMod Recovery ROM. So the installation order will be: ClockworkMod recovery->Cyanogen7OS (Gingerbread based)->4ext recovery to partition SD card->BlackRoseHboot to repartition internal memory->Evervolv KitKat-based N1 ROM-> run Mounts2sd for startup scripts ->reboot to your new life among the anatomically modern cyborgs (and then you're on your own for getting all your apps and music and contacts and stuff back on the phone from wherever you saved it).
Ready? Here we go!
1. Install the Android SDK on your computer.
1. Get the appropriate version here: http://developer.android.com/sdk/index.html
2. Unzip it.
3. Run the setup.exe (if using windows)
4. When asked which packages to install, choose “Android SDK Tools”, “SDK Platform Android 2.1″, and “Usb Driver package” (If you use eclipse, check that last link for instructions on using the ADT plugin (Not the same ADT that cuts your paycheck, much less inept))
5. Make sure the USB drivers installed properly (windows).
1. Go to printers and devices in the control panel, or device manager
2. If you see an android device with no warnings, you're golden. If it has warnings, right click it and go properties->update driver (driver can be found in your android sdk directory where you unzipped the sdk bundle, in \usb_driver).
6. Boot up your N1 and plug it in to the computer. If the computer recognizes it and they play nice, you're set with the sdk. To extra check, open terminal and cd to the sdk's platform-tools folder that should contain the adb utility. Type #adb devices and see if it comes up with a message telling you that it's running a daemon on a port like 5037, and then lists something like HT9CPP800063 device. This is your phone, it's telling you you're beyond connected. You've got the sdk working. Else have your friend Google help you get the SDK properly installed.
2. Root the phone so it will let you dig in.
1. Put your N1 in USB debugging mode (Settings > Applications > Development > USB Debugging)
2. In the terminal, in the platform-tools folder, type #adb reboot bootloader. (((My phone has a power hardware issue and will not reboot while plugged in ever to any mode ever at all ever, if yours does too you can unplug (first type #adb kill-server to make it ok to unplug) the usb cable, power down, wait five seconds, and hold the trackball and power button to power back up into the bootloader, then plug in again. There was a lot of unplugging, waiting fifteen seconds, booting while holding buttons, plugging in, adb devices -ing that I will omit henceforth due to low likelihood that you have the same problem.)))
3. Using the onscreen directions on the phone and the hard buttons, navigate to fastboot mode. It may be unresponsive and throw some not-found messages for five seconds before it lets you do anything.
4. In the terminal on your computer, in the platform-tools folder, type #fastboot devices to see if your devices is connected (it should come up with the same HT#XXX###### number).
5. This step will gain Root access, unlock the bootloader, and WIPE ALL YOUR ****. Now type #fastboot oem-unlock . You may have to accept the warranty voiding. If for whatever reason it doesn't work, use this method http://code.google.com/p/bexboot/, and unzip the files to the platform-tools folder.
6. Using the phone buttons, reboot. Your little lock logo during the bootup should be unlocked now.
7. Power down and boot again for good measure. Re-enable usb debugging in the phone app dev settings.
3. Get ClockworkMod Recovery.
1. Download koush's ClockworkMod Recovery from : recovery-clockwork-5.0.2.0-passion.img and put it in the platform-tools folder.
2. To make sure the file is not corrupted and will not brick your goods, check the md5sum. This is the result of a complicated equation that easily reveals even a single flipped bit in the file by vastly changing the output. Google how to do this, in windows you'll need to download a tool like winmd5free. The output for this particular file should be: md5: 45716c8d51ed2375873f01f0b14b2184 If it's anything else don't use it.
3. Reboot to the bootloader again, either by #adb reboot bootloader or by powering up while holding the trackball, and navigate to fastboot.
4. Verify that you're connected with #fastboot devices
5. Flash ClockworkMod Recovery by typing #fastboot flash recovery recovery-clockwork-5.0.2.0-passion.img
6. It should give a success message. Reboot to recovery from the fastboot menu. It should be a sweet new blue and white ClockWorkMod recovery. Power down and reboot to recovery by holding volume up as you power up, just for good measure.
4. Get CyanogenMod7 ROM.
1. On your computer, go to http://download.cyanogenmod.org/?device=passion&type=stable and download the latest stable CM7 zip. Put it in the platform-tools folder.
2. Check its md5 as you did in part 3.
3. Do #adb-devices, which should give you that serial again, and the word recovery.
4. Place the zip file on the root of your SD card by doing #adb push cm-7.2.0-passion.zip /sdcard/
5. If that last step failed, try running #adb shell mount /sdcard or #adb kill-server then #adb devices then #adb shell mount /sdcard, then try the push again. Or mount the sdcard through the recovery menu before running that push command. Or use your computer's file system to drag and drop the .zip to the root (lowest) folder of the sd card.
6. Using the recovery menu, in backup and restore options, backup your current ROM.
7. In the format menu, do a wipe data/factory reset. Wipe the cache and dalvik cache while you're at it.
8. Back in the main recovery menu, do install zip → choose zip from sd card.
9. Select that CM7 zip file.
10. Return to the main menu and reboot the system. It should come up with a totally different looking leaner meaner version of Gingerbread, that gives you more control and speed and saves battery. But even with this system, given modern app sizes, you'll soon run out of room on the internal memory if you stop now. And besides, you're having too much fun.
5. Get 4EXT recovery
1. Go to 4ext.net and download the free .apk file: http://www.4ext.net/get.php?apk Congratulations if you're about to install your first not market app (apps are now .apk, not just something you get from the store's GUI.). Save it in platform-tools. Or, to be really nice to Max, you can just buy the app in the play store and skip the next two steps.
2. Enable USB debugging, plug in and #adb-devices.
3. # adb install 4EXTRecoveryUpdater.apk. You should get back a success message in a fistful of seconds.
4. At this point you may need to back out to regular settings, turn on wifi, and hook up to your wifi router.
5. Open the 4ext recovery updater app. Go to settings. Allow superuser permissions and everything else. It should detect Nexus One, connect to the internet, and boot you back to the main menu.
6. Go to online install. They're all release candidates and no stable versions, so just go with the newest one. Select install.
7. Wait for it to finish and then reboot to recovery, either by # adb reboot recovery or manually. You should have a beautiful new touchscreen recovery.
6. Partition your SD Card
1. In recovery, go to tools->partition sd card->remove all partitions and start from scratch.
2. For the first Ext partition, where you'll be keeping a good chunk of your OS, The consensus online is not to go above either 1.5GB or 2GB. I'm working fine with 2GB aka 2048MB.
3. You can skip the 2nd Ext partition.
4. The internet says Swap size should be 0.
5. Internet says File system should be ext4. This should do the partitioning, the rest of your SD card will still be great for storage as before.
7. Repartition internal memory using BlackRose:
1. I have never used BlackRose on Windows, but here goes: go here : http://forum.xda-developers.com/showthread.php?t=1270589 and download this zip archive: http://forum.xda-developers.com/attachment.php?attachmentid=1016437&d=1334971685; It has windows and linux files. The site also has a manual in case this walkthrough lets you down.
2. Unzip it into a folder in your platform-tools. Execute it with a ./ in linux or a .exe in win. It should say waiting for devices.
3. Reboot your phone manually. BlackRose should hijack the startup, install itself, and quit. Boot your phone up again.
4. Blackrose is rumored to have an interactive guide to partitioning, but it didn't work for me and at least some other genius on the internet, but being an industrious Austrian, he figured out the fix: Run Blackrose in Editor mode. Type resize as prompted.
5. The post here http://forum.xda-developers.com/showthread.php?t=2540366 on Evervolv KitKat implies that 250MB for System works with enough space for Gapps (Google does not allow their standard apps like Play Store to be included with Mod roms anymore, so you will need to install them from recovery too, but they distribute them bundled so it's not hard.), and some commenter said 260MB, but that didn't work for me long enough to run startup scripts and move some of it off. So I had to redo it and I went with 265MB for System and 10MB for Cache, which is working fine. Give it a name, I went with Kat.
6. BlackRose will shut down, but it will leave a golden turd in the form of a file called hboot_brcust.nb0 probably in the folder called “other.” That's what you want.
7. Put that file in the same folder as the Blackrose utilities fastboot-l and fastboot-w if it's not already there. Then boot your phone into fastboot again, via adb or manually. I think. Maybe try this from being standard booted up if the next part doesn't work.
8. Run # fastboot-l flash hboot hboot_brcust.nb0 . Windozers should use fastboot-w instead. Blackroot will wait for the device again.
9. Reboot your phone into the bootloader manually, by holding the trackball while powering up. The image should install on this boot, resizing your phone's internal memory partitions.
10. Run # fastboot -w. Your Bootloader should be loaded up, with the 1st line saying something about BlackRose and the 2nd line saying 265/10/161. This is how you know it worked. That 265 is where it's at for KitKat. Your main OS had been destroyed, but your Recovery ROM should still work.
8. Install Evervolv KitKat.
1. Go here http://evervolv.com/devices/passion and download the latest stable release. At press time that's the 4.0.0p4.2 version. Save it to platform-tools.
2. Reboot to Recovery from the menu in the BlackRose bootloader.
3. Do # adb devices. Then do # adb push ev_passion-4.0.0p4.2-perdo-squished.zip /sdcard/ . If it doesn't work, try using the touch recovery menu to toggle mount USB, then push, then unmount. Or mount USB, use the computer's file system to move the file to the root of the sd card, then unmount USB. Or try as root if you're using linux.
4. From the main recovery menu, select install zip from SD card → choose zip → select the ev_passion-4... zip. Wait up, it could take a while.
5. Success!! Right? Right. #adb kill-server, you can unplug now and won't need to plug back in! Reboot the phone, you're getting perilously close! This boot could take five plus minutes, or just one, but be patient.
9. Install Gapps.
1. You are such a lucky dog. Gapps bundled updates are available through the Evervolv toolbox. So you can get Play Store and everything else will come easy. Go to settings → wifi, turn it on, hook it up to your wifi router.
2. Back up to settings, and go Evervolv Toolbox → Updates and swipe over to the Gapps section. Tapp the most recent Gapps-kk zip. Tap the down arrow to download.
3. Reboot manually to recovery.
4. From the main recovery menu, select install zip from SD card → choose zip → select the gapps-kk... zip. This could also take a sec.
5. Reboot again! You're almost done! When it's all loaded up, Play Store should now be installed, as well as various google options that you can enable through the Evervolv settings.
10. Install Mounts2sd.
1. Go to the Play Store and get Mounts2sd.
2. Hit the top right corner for application settings. You'll need to install a startup script. Agree, give it permanent superuser status.
3. Reboot.
4. Go back into Mounts2sd, and go to the Tool menu (Wrench). Note that boxes aren't checked unless they're green-checked.
5. Enable the Cache to move cache partition to data or sd-ext. Storage threshold is up to you. Make sureApplications, Libraries, Data, and Media are all checked. Dalvik should stay unchecked, System apps can too.
6. Reboot again.
11. You're done!!! Or at least we're done. You still have to restore your apps and put all that music back on and figure out how to resync your contacts and... Good Luck.
12. If you want to get extra tricky, it's believed to be possible to leave app data on the real internal memory by default, and use Titanium Backup to move the data of most of your apps to the SD-ext, thereby leaving the data of your favorite apps on real internal memory. Use at your own risk.
ENJOY!!
Appendix 1:
Linux PATH env: I put all my android stuff in a file called androidy, so my path to my platform-tools was /androidy/adt/sdk/platform-tools, and my blackrose was in there too. So to set my PATH, I used: $ export PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/sean/androidy/adt/sdk/platform-tools:/home/sean/androidy/adt/sdk/platform-tools/blackrose_120421/binary"
In order to make sure that while using it as root (as was necessary for some fastbot operations), I referenced the same PATH instead of the messed up root PATH, I used sudo env PATH = $PATH a few times.
Appendix 2:
The only actual bug I've noticed in a few days with this ROM is that my Chrome bookmarks don't add shortcuts to the homescreen when I tell them to from within Chrome. The widget-adder (longpress homescreen) has a bookmark option though, so if you bookmark it you can put it on the homescreen from there.
Huge Thanks to everyone involved with ClockworkMod, Cyanogen, 4Ext, BlackRose, and Evervolv!
Sources:
http://wiki.cyanogenmod.org/w/Install_CM_for_passion
http://nexusonehacks.net/nexus-one-...n-how-to-unlock-bootloader-on-your-nexus-one/
http://marian.schedenig.name/2012/07/22/installing-android-4-ics-on-the-google-nexus-one/
http://forum.xda-developers.com/showthread.php?t=2540366&page=24
Wooooh, Amazing book ! Everything is soo.... deep. In my opinion, tutorials should be only few lines.
Some mistakes :
Why installing CM7 and then backing up ? (You can install non market apps without CM7, and when flashing CM7 you erase all user data)
Why using m2sd if the rom has a built-in feature called a2sd ?
Why installing CWM then 4EXT recovery ? (TWRP is a touch one, and you can flash recovery once you have root access)
"You should have or buy an 8+MB, Class 10 SD card" ? typo ?
In my mind, big steps should be :
1) Backup SD, and SMS and Apps
2) Root
3) Install recovery (TWRP is advised by evervolv, but CWMRecovery is OK)
4) Partition SD
5) Install Blackrose (using 260mB system)
6) Flash ROM
7) Flash GAPS
8) A2SD Y N Y
Notes :
About SD-Ext size, i recommend reading this post from his creator : http://forum.xda-developers.com/showthread.php?t=1716124
A2SD is an old version of INT2EXT+
Using terminal is not friendly for beginners. Avoid it at maximum.
Provide a link for a MD5 sum checker.
I don't know if it works with actual stock rom, but when i rooted my n1, i used SuperOneClick. Plug, Click, Wait, Smile. (I still have it if needed)
ldFxl said:
In my opinion, tutorials should be only few lines.
Click to expand...
Click to collapse
This tutorial doesn't need to exist at all. All the information is available elsewhere on the internet, I did nothing original. Its only value is that it puts all the information in full detail in one place so you don't have to look in the forums for elaboration on each line of a more concise tutorial. Hopefully with info this detailed, someone with more chops than me could script it.
ldFxl said:
Why installing CM7 and then backing up ? (You can install non market apps without CM7, and when flashing CM7 you erase all user data)
Why using m2sd if the rom has a built-in feature called a2sd ?
Click to expand...
Click to collapse
I had already installed CM7 when I thought to write this, Marian (my 3rd source) seems pretty skilled as he is the only one who could make BlackRose work for me so I trusted his advice that it was the easiet procedure he found. Have you put TWRP Recovery on from stock after unlocking the bootloader (fastboot oem unlock)? And have you successfully repartitioned SD (fat32 &ext4) from TWRP? If so and you want to quickly write up the steps, I'd gladly replace my steps 3-6, that would save people a lot of time and doing.
ldFxl said:
Why installing CWM then 4EXT recovery ? (TWRP is a touch one, and you can flash recovery once you have root access)
Click to expand...
Click to collapse
4EXT is also touch, CWM cannot repartition SD. If you can go stock to TWRP this might be the best option. Or if not, stock to 4ext.
ldFxl said:
"You should have or buy an 8+MB, Class 10 SD card" ? typo ?
Click to expand...
Click to collapse
Yes! Thanks.
ldFxl said:
Using terminal is not friendly for beginners. Avoid it at maximum.
Click to expand...
Click to collapse
Don't you have to use terminal to use the built in A2SD? At any rate, it didn't work for me (I'm kind of a beginner), Mounts2SD's GUI seemed a little more beginner friendly. Also I certainly wouldn't have been able to make BlackRose work
ldFxl said:
Provide a link for a MD5 sum checker.
Click to expand...
Click to collapse
Good idea
ldFxl said:
I don't know if it works with actual stock rom, but when i rooted my n1, i used SuperOneClick. Plug, Click, Wait, Smile. (I still have it if needed)
Click to expand...
Click to collapse
I once used SuperOneClick on another phone, it looked like it struggled and finally worked with a DDoS style attack, it seemed simpler to just do it the way the manufacturer intended (if that's even a thing). But I suppose if it works with one click it really is simpler as seen by the user. Anyone have a report on whether it worked from stock N1?
Fituate said:
I had already installed CM7 when I thought to write this, Marian (my 3rd source) seems pretty skilled as he is the only one who could make BlackRose work for me so I trusted his advice that it was the easiet procedure he found. Have you put TWRP Recovery on from stock after unlocking the bootloader (fastboot oem unlock)? And have you successfully repartitioned SD (fat32 &ext4) from TWRP? If so and you want to quickly write up the steps, I'd gladly replace my steps 3-6, that would save people a lot of time and doing.
Click to expand...
Click to collapse
On my first flash, i was pretty beginner, so i followed a tutorial ; ) . And they used CWM. But flashing a recovery procedure from .img file doesn't differ with the recovery. TWRP allows you to partition SDCard. I did it last week (on HTC wildfire S, TWRP 2.6 as for N1).
Flashing step is the same -> just replace img file name. You can get it Here (From official TWRP Website)
Procedure from TWRP Website said:
Download the above file. Turn off your device. Turn on the device and keep holding volume down until a menu shows up. Select fasboot from the menu list. Plug the device into your computer. If you have the right drivers installed, your screen should now say FASTBOOT USB. Run the following command via the command line:
fastboot flash recovery recoveryfilename.img
Note that you will need to change the last part to match the name of the file that you just downloaded. This method requires that you have the drivers installed that come with the HTC Sync software that are available here. You will also need adb and fastboot for your computer.
Click to expand...
Click to collapse
6. Partition your SD Card
1. In recovery, Tap Advanced
2. Tap Partition SD Card
3. Set 2048 (MB max) on EXT Size and 0 on Swap Size
4. Tap EXT4 then swipe to start partitioning
Fituate said:
3. Reboot your phone manually. BlackRose should hijack the startup, install itself, and quit. Boot your phone up again.
Click to expand...
Click to collapse
Backrose is a custom Bootloader-> it replaces your HBoot/Fastboot
You don't need to reboot your phone to install blackrose. You just need your phone in ADB over USB, then the win setup will install blackrose.
Once done, run setup again, your phone will automaticaly go to HBoot, then choose 1, and 1 again.
Then enter "resize", "260" and "8".
In case that the installer don't work correctly, you can get flashable HBOOT from [Provide a nb0 (texasice recommend 260/8/168) AND MD5 Checksum]
While googling to find some infos (I don't remember me unlocking my bootloader) I found this guide : http://forum.xda-developers.com/wiki/HTC_Nexus_One/Flashing_Guide
Apperently SuperOneClick does not even need unlocked bootloader on 2.3.3 or previous ...
Isn't what we are trying to write down ?
There are many links pointing to this forum aswell.
It's a bit urgent to get solved, I'm at college, and that's the only way to talk with my parents, being 1 or 2 days without answering them would be a problem, since they will start to get worried.
Phone: Motorola Moto G 2014, XT1063
Using Team Win Recovery Project v2.8.0.1
Basically I was trying to update to the Android 5.0, since I had my phone rooted, I decided to go with an customized ROM.
DIdn't understand why, but it f**ed up.
Basically I cleaned everything, and in an act of desperation I also lost my sdcard, I've been trying to install the ROM through sideload, but it's not working, I get the error *failed to write data protocol fault no status*, and the phone keeps rebooting, and stuck in the "WARNING BOOTLOADER UNLOCKED"
I appreciate any kind of help, as I said, it's really important to solve this ASAP.
Thanks in advance!
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
gouzzz said:
Basically I was trying to update to the Android 5.0, since I had my phone rooted, I decided to go with an customized ROM.
Click to expand...
Click to collapse
1) download TWRP 2.8.4.0 and install it through fastboot.
2) Since you have no sdcard we will use the mtp capability of twrp
-- Boot into your newly installed recovery. Check the version
-- Go to Mount and disable mtp and unmount everything. Now enable mtp. You should see that Data is mounting automatically and should appear on your Computer.
-- Transfer your ROM (I recommend The Titan Prime Rom for XT1063/64. It's based on stock and much more polished than CM12)
-- Download and transfer pa-gapps (MICRO MODULAR PACKAGE).
-- Download and transfer latest SuperSU (min version 2.45 is required by our device).
-- Wipe Dalvik, Cache, System and Data
-- Now Flash ROM, GApps and SuperSU. reboot and wait. it will take a couple of minutes.
Doppel u r right. follow doppel steps.
doppelhelix said:
1) download TWRP 2.8.4.0 and install it through fastboot.
2) Since you have no sdcard we will use the mtp capability of twrp
-- Boot into your newly installed recovery. Check the version
-- Go to Mount and disable mtp and unmount everything. Now enable mtp. You should see that Data is mounting automatically and should appear on your Computer.
-- Transfer your ROM (I recommend The Titan Prime Rom for XT1063/64. It's based on stock and much more polished than CM12)
-- Download and transfer pa-gapps (MICRO MODULAR PACKAGE).
-- Download and transfer latest SuperSU (min version 2.45 is required by our device).
-- Wipe Dalvik, Cache, System and Data
-- Now Flash ROM, GApps and SuperSU. reboot and wait. it will take a couple of minutes.
Click to expand...
Click to collapse
The device appear as offline in the fastboot, sometimes even doesn't appear, where can I get the drivers?
I searched for naked versions, and "universal" ones, but none seems to work.
gouzzz said:
The device appear as offline in the fastboot, sometimes even doesn't appear, where can I get the drivers?
I searched for naked versions, and "universal" ones, but none seems to work.
Click to expand...
Click to collapse
You can get Motorola drivers here. You probably also need a recent version of adb and fastboot. You can ge it here Minimal ADB and Fastboot. Install it.
start "Minimal ADB and Fastboot" by navigating to the Start Menu Folder you choose to create during installation or the desktop shortcut you choose to create and select "Minimal ADB and Fastboot"
You should now see a command window open.
Put your device in fastboot mode and connect usb.
Now just do verify type this command
Code:
fastboot devices
the output should show something like this (your number is different)
Code:
fastboot devices
ZX1D225X69 fastboot
now put your recovery.img into the directory where your command window is open and start flashing
Code:
fastboot flash recovery NAME_OF_RECOVERY.img
---------- Post added at 15:34 ---------- Previous post was at 15:31 ----------
gouzzz said:
EDIT: Now it doesn't charge, or something. I connected it to charge, but it keeps appearing 0% for more than 30 minutes, I can't even access the menu from "Volume Down + Power On"
Click to expand...
Click to collapse
You need a wall charger. USB from pc does not supply enough power. And you need at least 25% (ish) otherwise fastboot will refuse do do anything.
doppelhelix said:
You can get Motorola drivers here. You probably also need a recent version of adb and fastboot. You can ge it here Minimal ADB and Fastboot. Install it.
start "Minimal ADB and Fastboot" by navigating to the Start Menu Folder you choose to create during installation or the desktop shortcut you choose to create and select "Minimal ADB and Fastboot"
You should now see a command window open.
Put your device in fastboot mode and connect usb.
Now just do verify type this command
Code:
fastboot devices
the output should show something like this (your number is different)
Code:
fastboot devices
ZX1D225X69 fastboot
now put your recovery.img into the directory where your command window is open and start flashing
Code:
fastboot flash recovery NAME_OF_RECOVERY.img
---------- Post added at 15:34 ---------- Previous post was at 15:31 ----------
You need a wall charger. USB from pc does not supply enough power. And you need at least 25% (ish) otherwise fastboot will refuse do do anything.
Click to expand...
Click to collapse
On the MOUNT and UNMOUNT processing I don't see anything on my PC, I don't even know how to unmount it. It only appears Enable MTP and disable.
How am I supposed to load the ROMS?
Tried with sideload but got an errror : "Error executing updater binary in zip .."
Seems like the drivers aren't working properly, I have Windows 8.1, on the site it doesn't talk about it, this might be the problem? Cause I instaled motorola device manager, I scan for drivers but it doens't find anything, and the phone apperas with the yellow triangle on the Device Manager.
----------------------------------------------------------------------------
----------------------------------------------------------------------------
EDIT: I managed to boot the Titan 5.0.2, but now it's stuck in the 4 balls moving around, i waited for about 1hour.