Hi All,
I Upgraded my Samsung Galaxy S to Froyo 2.2. All seems well but the performance does not seem all that great as well.
If i want to restore back to the Standard Manufacturer Firmware (i was on JG4) that comes out of the box with the I9000 what do i have to do? Any help here would be appreciated.
Download the firmware from samsung-firmwares and flash your phone with odin. There is plenty of flashing tutorials about to show you how to do it. Although if you managed to update to froyo then you properly already know how to flash it again
Sent from my GT-I9000 using XDA App
Restore
Hello. I managed to get the firmware from samfirmware.com for the original 2.1 (Asian version) but I couldn't get it to follow through. There would always be an error with regards to MD5 or something. What do I do? Thanks
Ren Hayashi said:
Hello. I managed to get the firmware from samfirmware.com for the original 2.1 (Asian version) but I couldn't get it to follow through. There would always be an error with regards to MD5 or something. What do I do? Thanks
Click to expand...
Click to collapse
I have the same problem as well, any helps here please?
Alot of the the DXJG4 firmware out there is corrupted.
So, try download DXJF4 from samfirmware.com (and flash with Odin with 513 pit) then uprade to DXJG4 through KIES.
NOTE: If KIES says "Device version's cannot be upgraded". Then you need to change your product code back to "XSO" (Search the forum on how to change product code.... about editing the nv_data.bin file)
My Flash history:
DXJF4-->DXJG4-->XXJPK-->DXJG4
I'm pretty new....
The firmware versions you guys are talking about are I hope, all "software" version and not real hardware chip revisions?
thanks
why dont you just flash your phone with 2.2.1 or 2.3.3(latest).....i know 2.2 is quite unstable FW but 2.2.1 will help a lots......I dont think you need to downgrade the phone back to the stock FW to solve any problem
Hey everyone,
I rooted my nexus one when it was 2.2, now im trying to update to 2.2.1. However the OTA update wasnt taking, it failed and the installation aborted everytime. I search forums and found one saying to factory reset my phone, which i did. Saved everything with titanium backup. Now im stuck with:
Firmware: 2.1-update1
Kernal version:2.6.29-01117-g4bc62c2 android-build apa26#1
Build nuumber: EPE76
One problem is i do not get an OTA update to upgrade to 2.2 or 2.2.1. Also i did a manual update with signed-passion-FRF50-from-ERE27.1e519a24.zip and it fails and installation aborts. How can i get back to at least 2.2, but preferably 2.2.1.
Also when trying to restore my apps from titanium backup, it tells me my phone is not rooted, but I still see the little "padlock" unlocked when i boot my phone.
Thanks, hope someone can help
John
What recovery are you using?
fastboot, then recovery, used a zip i downloaded from another forum that gave me build epe76. just renamed it to undate.zip and let the phone do the work.
What recovery are you using? Stock? Clockworkmod? Amon_RA?
i guess just stock, all i do is fastboot the phone and hit recovery
Have you tried ROM Manager?
yes but i am getting an error that my phone is not rooted. Although it is, the padlock is open when i boot the phone. If I root it again will i be able to install 2.2?
gimpyjohn said:
yes but i am getting an error that my phone is not rooted. Although it is, the padlock is open when i boot the phone. If I root it again will i be able to install 2.2?
Click to expand...
Click to collapse
There you go.
Unlocking the phone is one thing. Rooting is another. You need to root it over again, but it should be easier this time since you do not need to unlock your bootloader.
ok i will try but before i do should i upgrade to 2.2 or 2.2.1 first then root it again? Because that was my problem originally, i rooted it when it was 2.2 and could not get do the OTA update to 2.2.1 to work the installation aborted with an error every time.
No, root the phone first. Then you can put whatever the hell ROM you want.
It's like putting your pants on first, then your shoes.
Yeah root first cuz most of the custom rom already jumps to 2.2.1
Sent from my Nexus One using XDA App
Also, if you root first, you can make a full backup before doing anything else...
Sent from my Nexus One using XDA App
Hello everyone,
I have installed the P1000XWJMI version from samfirmware, first it is a cyrillic version, second lots of bugs are this version and it is too slow summary of the update . I tried to go back to my old version JJ7 but it is not working odin don't want to flash back anymore. So i am stuk on this version. can anyone help to go back to the old version ??
Solution to unlock found by chainfire and rotohammer and others ino post "warning do not flash jk jm etc"
It is sticky am7 surprised you haven't seen it
Sent from my GT-P1000 using XDA App
Use this patch.
Then you can install roms with the locked bootloaders by modifying the odin files before you flash. You have to untar the files, remove a few files, them retar the files into the odin file, and flash.
Firstly, apologies if this is already posts elsewhere, but I have tried looking for this with no joy (there's aloooot of threads n here lol)
I recently upgraded to the leaked official 2.3.3 using odin (sbl version).
However, I would like to flash with stock software now to get the official upgrade on my Galaxy S via Kies.
Can someone please help or point me to a guide on doing this and where i can download the correct version. I assume its not as straightforward as simply downloading a stock version of Froyo and flashing as I did to upgrade.
My Current phone version is showing as PDA:JVK / PHONE: JVK / CSC:JVK (CPW)
I should point out that this is the first time ive flashed software on my phone, so ideally a step by step guide, if there is one out there
Thanks for any advice you can give
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
azzledazzle said:
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
Click to expand...
Click to collapse
I think that JM1 is eclair...
froyo works with the gingerbread bootloaders so you should just be able to flash a froyo rom i THINK.
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
neoian1277 said:
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
Click to expand...
Click to collapse
Any froyo ROM is fine as long as it contains the bootloaders as gingerbread ROMs have different ones.
Download your ROM. Check inside the PDA (sometimes code) tar. If you can't see by clicking on it find instructions how to untar it.
There should be a boot.bin and an sbl.bin if there is you're good to go. If not flash another one that has.
You can always reflash with your preferred froyo ROM after the initial flash has downgraded the bootloaders
This link tells you all you need to know about flashing with Odin.
http://samsunggalaxysforums.com/showthread.php/2921-How-to-use-Odin-to-upgrade-to-Froyo-from-Eclair
Sent from my GT-I9000 using XDA App
Ok, I tried flashing using the JPY firmware. The process seemed to go okay.
But only getting the 'S' logo for ages then the phone starts ocaasional quick vibrations and screen eventually goes black.
Have tried rebooting ans reseting.
Please help
First boot after a flash does take a long time and you may get the odd little vibration. The screen may go black for a little while. Be patient. If nothing happens after six or seven minutes pull battery try again. If still no good reflash.
You did check repartition in Odin? And use. 512 pit? You need the pit file for a reflash.
Maybe md5 your firmware to check you didn't get a corrupted download.
If you can still get download mode don't worry you will be able to sort it. Most people on xda brick their phones most weeks!
Sent from my GT-I9000 using XDA App
well i reflashed the 2.3.3 leaked and its working for now, will try again tomorrow, getting a bit late.
Was wondering about whether I should try the JM1 instead of JPY. But, on the Sammyfirmware website they only had XW***JP1 which I understand is not for UK/Europe (mine is XX)?
But thanks everyone for your help so far, i may be back on in tears tomorrow
You can use any firmware - they were released with different codes in different regions but if you use a multi CsC like the one in the jpy ROM it doesn't matter because its the csc file that does the regional settings not the PDA file
Sent from my GT-I9000 using XDA App
Hmmm well showing on Samsungs FB page that the ginerbread update has been pulled (by Google)
Guess i'm sticking with the leaked version for now
Sorry to muscle in on this thread but I'm trying to go back from GB 2.3.3 to Froyo 2.2.1. I've flashed JPY with Odin, used repartition, 512 pit and registry patch 1.82 to XEU, phone works fine. Well, Kies then recognises that there is a new firmware (JPY as it happens) and starts the upgrade process, I then get an error message saying that this version can't be updated
Any ideas??
MTIA
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Anybody tell me what is lagfix and why it is used for?
and why different kernels are used
Galaxy S XWJVB
richard2311 said:
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Click to expand...
Click to collapse
We now have two threads on the same subject but as this was started first I'll continue with this one.
Thanks for the suggestion, I flashed JPU but unable to connect to Kies so flashed the 1 file JPY but still got the same error message with Kies. Maybe I'll try reinstalling Kies and see what happens.
OK, I've reinstalled Kies, changed the product code in the phone with *#272*IMEI# to XEU and now Kies tells me that I have the latest firmware - great bring on the official version of GB.
can anyone give me a link of jpy firmware with bootloader?
the ones from samfirmare.com are WITHOUT bootloader...
Okay, seems that Samsung have finally released Gingerbread.....again. So am gonna make another attempt at downgrading to Froyo so I can get the official Gingerbread update.
However, because of the issues I had with my last attempt, I would like to make sure I am doing it correct.
Current Phone Software
Model: GT-I9000
Firmware Ver: 2.3.3
Baseband Ver: I9000XXJVK
Kernal Ver: 2.3.35.7-I9000XXJVK-CL75655 [email protected] #2
Build Number: GINGERBREAD.XXJVK
I believe the version I installed included the bootloader
The phone was purchased in the UK on T-Mobile but supplied through Carphone Warehouse
Steps:
Downloaded: I9000XXJPY (single file) & 512.pit from Samfirmware (does this contain bootloader? If not, will it cause an issue in updating on Kies?)
Remove sim & memory card
Start phone in Download mode
Plug in USB
Open Odin v1.3
Select .tar file as PDA
Select 512.pit file
Re-Partition - Not Ticked
Auto Reboot & F.Reset Time - Ticked
Click Start
Wait for installation to complete and phone to restart
Hopefully i've provided all the info required, but if not, please post or PM me. If anyone could please check my steps above and let me know if i'm doing this correct or not before I go ahead.
Much appreciated
hi there,
as i know, to run a 2.3.3 rom on SGS , we need to flash a new bootloader right?
but what if i wanna roll back to 2.2.1? do i need to do somthing to re-install a bootloader for 2.2.1?
cuz in most tutor of installing a 2.2.1 rom did mention DO NOT touch the "Phone Bootloader Update" option of odin3
thanks.
I have found a method to downgrade successfully and created a new post with the step by step guide
http://forum.xda-developers.com/showthread.php?t=1100906
Sent from my GT-I9000 using Tapatalk
Hi guys, I'm having trouble with my Milestone after trying to update it from 2.1 to 2.2, its stuck on the "M" logo. I've tried flashing it again using the SBF on and-developers.com/sbf:milestone221[/url] but I'm still getting the same boot problem. I was wondering if I tried flashing it back to 2.1 if that would work and where I could find the SBF as the multiupload links from the above site no longer work.
Cheers