Related
I have managed to create a shortcut which will take me directly to the Band tab in the Phone settings app. This will enable me to switch between GSM/3g and power cycle the radio with a couple less screen taps. I am having dificulty getting an approriate icon to display and I welcome any suggestions.
The shortcut properties are
Code:
"ctlpnl.exe" cplmain.cpl,20,3
Ok so I was playing around with Any Cut today to see what everything is and I decided to make a little list of everything and what it does:
ACTIVITY:
Alarm Clock
Enable Forecast Alarm Clock
Alarm Clock
Actual Alarm Clock Program
APNs
Brings up APNs Settings from settings
Application Settings
Brings up Application settings from settings
Attention
Mobile Network settings form settings
Battery Info
Brings up battery info (battery status, level, voltage, temp etc etc)
Bluetooth Settings
Brings up Bluetooth settings from the settings
Browser
Brings up the web browser
Calculator
Brings up the calculator
Calendar
Brings up the calendar
Calendar Content Provider
Brings up CalendarContentProviderTest (Run All, Recurrence Processor Test, ICalendar Test etc etc)
Calendar Tests
Brings up CalendarTests (Run All, Format Data Range Test, Week Number Test)
Call Settings
Brings up Call Settings form settings
Camera
Brings up the camera
Camera Settings
Brings up Camer settings from settings (store location in picture, prompt after capture)
Camera Settings
General Settings (Picture size, picture sort, slideshow intervals, etc etc)
Change SIM PIN
Change SIM PIN from settings
Contacts
Brings up contacts program
Data Roaming
UNKNOWN STOPPED UNEXPECTEDLY
Data Synchronization
Brings up data synchronization in settings (auto sync, gmail sync, calendar, and contacts)
Data & Time Settings
Brings up Date and Time settings (automatic, set date, set time zone, use 24 hour etc etc)
Data & Time Settings
Same as above
Debug Intent Sender
Brings up Debug intent sender (action, data, sccount, resource etc)
Delete Limit Exceeded
Nothing
Development
Brings up development menu from settings
Device Info
Brings up device info (uptime, awake time, asleep time, build description
etc)
Dialer
Brings up the phone dialer
Display
Brings up display menu (font size)
Email
Brings up email (not gmail email)
Enable/Disable SIM PIN
Enable SIM PIN menu
Factory Data Reset
Brings up Factory Data Reset (This action will reset the phone to its initial factory state...etc)
Field Test
Brings up Field Test application (Please select an item to test)
Fixed Dialing Number
Brings up Fixed dialing number menu (FDN disabled, Change PIN2, Manage FDN list)
Gmail
Brings up Gmail application
Google Search
NOTHING BLINKS SCREEN
Google Talk
NOTHING BLINKS SCREEN
GTalk Service Monitor
Brings up GTalk Service Monitor (brings a lot of personal information up, email address, has all connections listed...worth looking at)
Home
NOTHING
IM
Brings up the IM menue (AIM, Google talk, Windows Live, Yahoo messenger)
IM
Same as above
IP Settings
brings up IP settings (use static IP, IP address, gateway, netmask etc)
Locale
Brings up Locale menu (English (US))??
Locale
Brings up Text Settings (auto replace, auto cap, auto punctuate)
Locale
Brings up Locale menu (select your language)
Manage Applications
Brings up manage application from settings
Map
Brings up Google Maps applcation
Market
Brings up the Android applications
Messaging
Brings up messaging application
Music
Brings up the music application
Network Setting
Bring up Mobile Network settings (data roaming, use 2G, sperator selections etc)
Operator Selection
Brings up operator selection (available networks, search networks, select automatically)
Phone
BLINKS AND THATS IS
Phone Info
Brings up the Phone info menu (IMEI, IMSI, Ping IP address, roaming, GSM service etc)
Phone Status
Brings up About Phone menu (Status, legal info, contributors etc)
Pictures
brings up picture folder (all pictures, IMG, and camera pictures)
Pictures
Lists all pictures
Proxy Settings
Brings up proxy settings menu (hostname, port)
Quick Launch
Brings up the Quick Launch application (set QL shortcuts)
Quick Launch
Brings up quick launch menu to place on home screen
Raw Image Viewer
Brings up recent picture from camera
SD Card
Brings up SD card menu (enable USB mass storage, unmount SD card)
SD & Phone Storage
brings up SD card menu (total space, available space, Use for USB storage, Internal phone storage etc)
Settings
Brings up setting menu (wireless controls, call settings, sound and display etc)
Settings
SET GSM UMTS BAND SETTINGS (USA bans, JAP bans, AUS band, EURO band etc)
Setup WIzard
Initial setup when you get the phone
SIM Card Lock Settings
brings up sim card lock settings from settings
Sound & Display
Brings up sound and display menu
Sound Recorder
Brings up sound recorder application
Status
Brings up status menu (battery status, battery level, phone number, network etc)
Street View
STOPPED WORKING UNEXPECTEDLY
Sync (Old)
STOPPED WORKING UNEXPECTEDLY
Sync History
STOPPED WORKING UNEXPECTEDLY
Testing
STOPPED WORKING UNEXPECTEDLY
Unlock Pattern
Brings up unlock pattern application
Voice Dialer
Activates the voice dialing program
Wi-Fi Settings
Brings up wi-fi settings from settings
Wireless Controls
brings up wireless controls (wi-fi, wi-fi settings, bluetooth, bluetooth settings etc)
YouTube
Brings up YouTube application
YouTube Settings
Allows you to clear YouTube search history
YouTube Tests
Brings up YouTubeTests (run all, search test)
damn thats a long list..thanks for documenting it for us buddy!
Battery Info, Device Info, and Phone Info have some real nice information.
goodwinm said:
Battery Info, Device Info, and Phone Info have some real nice information.
Click to expand...
Click to collapse
I have those along with status, phone status, SD Card, and Field Test on one of my screens.
Testing, brings up Phone information & Battery information
AnyCut is cool but I want to make something that has all that information in a collective app that i can just click and obtain info. A report would be nice too, like with the network diagnostics tool in BlackBerry OS.
Anyone know if there is a way to bring up a certain contact. I know its possible to make a direct call/sms shortcut. But i would like to be able to open the contact and then select call or sms. I dont like making 2 shortcuts for 1 contact
MArtijn
having used this before and creating a few short cuts. But creating this pic mes short cut is driving me mad. can it be done
From the developer of S for Switch Voice:
Touchless Notifications Pro and Touchless Notifications Free in the Google Play Store
New: To become a beta tester of the Pro version please join this Google+ community: Touchless Notifications Beta testers
"Listen to your notifications while your eyes and hands are busy"
Please try the Free version to see if it works for you, before purchasing this Pro version
You might have heard about the "What's up?" feature on the Moto X. They can ask "What's up?" and Touchless Control reads them their notifications. Politely, totally hands free, without ever taking their eyes off of what they are doing.
So you like it? But you don't have a Moto X?
You can have it now on your Android phone! Touchless Notification does that and much much more.
Features:
► Reads out all active notifications, every app notification is supported
► Notifications are shown along the announcement in big clear fonts
► You can change the amount of detail from an itemised list to content of emails and text messages (for expandable notifications)
► Turns screen off, if phone is in your pocket
► Shake to mute
► Remembers what it has announced already, only updates you with what's new
► Language detection to use the correct TTS engine for non-English messages
► Choose chronology: newest to oldest or vice versa
► App exception list, to exclude apps from announcement
► Says ambient temperature on supported devices (Samsung S4, Note3, S5)
► Pauses the music for the time of the reading
Complete user guide available online: notifications.dataglobe.eu
Pro version benefits:
► You can personalize how Touchless Notifications will greet you, or turn off the greeting. The Free edition let's you change the greeting, but you will only hear it in the test announcement (in settings)
► You can hide the notification icon of the Pro version
► Touchless Notifications Free will remind you to get the pro version in the announcement
► Note: More Free features may be moved to the Pro version in the future
You can have the reading start without touching your phone. Here are the options: (see video!)
► Issuing the voice command "open notifications" in Google Voice Search (more variations of the command are coming soon)
► Issuing the voice wake-up command "Hi Galaxy" on selected devices (using S for Switch Voice Pro)
► Connect the wired or Bluetooth headset. You can configure the time delay before the start of the announcement. Also works with car hands free systems.
► Attach or detach the charging cable. You don't have to look at your phone to hear about incoming notifications when you go to bed or pick up your phone after charging.
► Many other ways by simply launching the app from Tasker, Locale, NFC Retag etc.
How does it work? The app is special, because it installs two icons on your phone:
► Touchless Notifications Pro: launch this for the initial setup and to change settings
► Notifications: launch this for the actual announcements
Touchless Notifications places a permanent notification in the shade if you select any of the headset/power monitoring features. Remove the notification by disabling all connection triggers in the settings.
Preparations:
1► Launch "Touchless Notifications Pro" (the 2nd icon, NOT the "Notifications" icon!)
2► Read the two popup windows and enable both settings:
- Notification Access (on some devices the link might no take you all the way into the necessary Settings menu)
- Device Administrator (this is needed to turn the screen off in pockets)
3► Select the amount of detail in the "What to say" section, with special attention to "App exception list". You will need to come back to settings in the beginning to mark unwanted apps from the announcements
4► Press speaker icon on top to test
Q&A:
Q I cannot uninstall?!
A Go to Settings / Security / Device Administrators and uncheck
Permissions:
READ_PHONE_STATUS=mute announcement when a call comes in
BLUETOOTH=detect when Bluetooth headset is connected to trigger reading
BOOT_COMPLETED=restart the headset/power monitoring after restart
Touchless Notifications Pro and Touchless Notifications Free in the Google Play Store
Version history
Beta channel: To become a beta tester of the Pro version please join this Google+ community: Touchless Notifications Beta testers
Symbols:
* fix
+ new feature
- feature removed
~ modification
4.00 (beta: free, pro)
* no more "empty" notifications announced (Oreo+ GROUP_SUMMARY filtered out)
* will not announce "Google" when the Google Assistant is opened
* "dot" is not pronounced (prononciation correction by default)
+ new option "Stop readout when call comes in" (neccessary to request PHONE_STATUS permission)
+ notification channels for Android Oreo
~sleep when done (show "Enable screen off / lock" when its grayed)
~change "Screen off + lock" menu item to show 3 options: "disabled" / "device admin lock" / "screen off via short timeout"
+request permission to adjust screen timeout
1:
+added replace default to eliminate "dot" or "questionmark dot" from readouts
*fixed: was no expanded text after v4.00
3.41
* whatsapp notifications are not read out if they come within 3 seconds of the previous (WhatsApp is notorious for updating its notification causing double readouts)
* button to clear unused apps from blacklist/messging apps
3.40
*show quick-command icons in expanded notification
3.39
*keep non-adaptive icon in intro screens (increased resolution)
+new option to black list phrases from only a specific app
3.38
*fixed crash when selecting English as a 2nd language (dialect)
+new adaptive icons (Oreo and later)
3.35
*fixed a crash in World List Preference (settext/→)
3.34
+new option: "Always use 2nd language" → disables "Speak in full sentences" [tip: +Sven Hofians]
*corrected spellign "alternate" to "alternative"
+added sale announcement in Free version
3.33
+Added proper Slack support [thank you +Matt Arnett]
*Fixed Hangouts notification (messages were read twice)
*Fixed issue reading "dot" at the end of announcements
3.30
*Device Administrator description added (Play Store requirement)
3.29
*rare crash fixes
3.28beta
*out of memory crash causing notification listener to disconnect
3.27
*Various crash fixes (previously unreported)
+App will now auto-activate itself after Play Store updates
3.26beta
+Attempted to stop duplicate readout of notifications of some apps on Android 6-7.
~Corrected the readout of Gmail messages on Android Nougat
3.25
*gmail messages are only read once
3.24
*crash fix: helpview==null setText
+privacy policy
3.23
*Improved stability: Hopefully no more crashes caused by triggers (never close database)
*Go to Notification Access by toggling the "Central switch"
*Screen off (via short timeout) is more stable
3.21
*works with always on display
*improved alternate screen-off method
*workaround for Marshmallow screen lock issues
3.20
*improved stability: handles large number of active notifications better
3.18
*second language words in upper case were not handled correctly
3.17
*gray word lists if "second launguage" option is turned off
3.16
*improved upgrade procedure from Free to Pro (will only prompt to release Device Admin if it was enabled in Free)
3.15 beta
*if you enabled "wave to mute" and put the phone on charger: it did not announce notifications → fixed
+option: "Screen off + lock" to select between screen off methods (device manager vs screen timeout hack)
*screen-timeout screen off method will not mess up if BACK or HOME is pressed during screen fade
+new setting: "Second language words" = Always use second language if text contains any of these words
+new setting: "English words" = Always use English voice if text contains any of these words
(if word match found neither 2nd language words nor identifier characters are checked)
*no toast is show at device boot
*intro slideshow buttons should now be correctly announced by talkback
3.13 beta
+Delay after each read-out: Time to wait after notifications are shown and announced (chance to dismiss)
+Amount of detail announced: Expanded content / Shorten expanded content / All expanded
*Tweaked the new screen off workaround to not leave a 0sec screen timeout accidentally.
3.12 beta
~Turns off screen without locking the device after readout
+Improved compatibility with Lollipop SmartLock
+New permission: WRITE_SETTINGS is necessary to apply the screen-timeout workaround
3.11
*fixed blank Google Now notifications!
3.09
*crash fixes
3.08beta
*multiple reported crashes fixed
3.07
+improved crash reports - please send them
*reported crashes fixed
3.06
*bugfix: caused by the previous update
*more reported crashes avoided
3.05
~now you can set non-US English as 2nd language for other dialects
*various crashes fixed (thank you to all who sent crash reports)
3.04
*Second attempt at removing the unwanted toast
3.03 emergency fixes
*Removed the repeating toast at boot
*Improved skip blanks option to work in more cases
*Various other smaller fixes which I did in the previous weeks but neither were big enough for a new release
3.02 more fixes and improvements
*Intro slider graphics optimized (caused out of memory errors)
*Built in help can be accessed from the intro slider (Question mark in the upper right corner blinks to draw attention to this)
*Bluetooth triggers related crashes fixed
*Fixed other random crashes
3.01 emergency bug-fix
*Crashed if Wifi SSID, Bluetooth device or Notification had apostrophe in their names
3.00 public release
~intro slider and built in help updated
3.0beta2
*Fixed: triggers were not started correctly after boot
+Debug modes = disable tasker plugin + disable all triggers (press MENU on Touchless Triggers screen)
3.0beta1
+"Touchless trigger system"!!! → change app settings based on time/bluetooth/wifi/power/hardware connections
-Removed: "Start summary when connected to..." menu item from Advanced mode (replaced by Smart triggers, still available in "Quick settings mode")
+Simple 2x2 widget: resize to only show/hide full screen control (1x1 and 1x2) / current settings (2x1 vs 2x2)
+Widget background transparency setting (under Voice I/O?)
+Notification actions → pop-ups allow you to select modes instead of dual-state toggles
~Tasker plugin interface [x] (+) Floating add button instead of checkboxes
+New audio stream option added: "None (silent / show only)"
~Monitor always on, unless "Central switch" is OFF
+skip blanks option (when only app name is known, everything else blank)
+new "Immediate readout" option: "Only if screen off"
~"Immediate readout" option "Always + show if headset or screen off" changed to "Always + show if screen off"
(Full screen notification is not shown unless screen is off or "Always + Always show" is selected for "Immediate readout")
+Audio stream selection made available from Tasker plugin (and the touchless trigger system) → set it to "None" to silence
+Audio interruption setting made available from Tasker plugin (and the touchless trigger system) → set it to "Keep" when silenced
+Full immersion display option
+export/import triggers
+log trigger activity
-Removed the voice control alternatives, as Google Now stopped being able to reliably launch applications by voice command
(an experimental, free stand-alone app can be installed from the Play Store)
2.08
+automatic cloud backup / restore settings (when installed on a new device) PRO
~Make "amount of detail" a multiple choice list where you can toggle individual components independently
2.07beta
*Attempt to fix Tasker plugin on Android v5.0.2
2.06
+Google inbox support
+Central off switch
2.05beta
*Audio over "BT mono" fix attempt for kitkat → please check to see if it now/still works this way with your device
~Extended the log (to start logging double press "email dev" item in the feedback section, click "email dev" to send the log)
2.04
+notification logging
~battery use reduced (NL service optimized)
*WhatsApp announcement problems sorted out
2.03
+user guide updated with Tasker plugin information
~messaging notifications: prevent repeated announcement of accumulated text in immediate readouts (Hangouts, WhatsApp)
*secondary language selection was not possible unless you selected voice engine immediately before it
~more of a text message is displayed
+Pre-announcement delay new option: Double delay (3→6 sec)
*back key behaviour in the built in user guide: click to go back in history, double click to exit
*inhibited full-screen flash-ins for notifications which disappear by the time they would get to be read
+some default black list items, notably "incoming call" and "ongoing phone call" for new Google Voice integrated Hangouts
+no notification readout during Hangouts calls (video or google voice)
*updated the app to work with the new version of Google Voice Search, which would start the Settings instead of the readout
Click for older history
2.02
+blacklist notification by search phrases
+pronunciation correction dictionary
*sometimes the phone could not go back to sleep after it woke to announce a notification
+proper Tasker plugin (add action / Plugin / Touchless Notifications) - only works in Pro version → see tutorial: http://youtu.be/mC9HmpxZR_w
+tasker/intent: quiet=no toast or notification ticker text displayed
2.01
+if full screen display and shake to mute were both turned off, there was no way to cancel a readout.
→ Now you can, by starting the summary again (by using launcher icon or notification quick action)
→ also the "Test Now" button restarts it with full-screen display, then you can use the back key to cancel
+broadcast intent is sent when woken from sleep (receive with Tasker IntentReceive event (action="hu.viczian.notifications.woke") details below
*"the"→"to" (on slide 7 of tour wizard)
~changed the wording on the "Notification Access stopped responding" → reboot if toggle doesn't help
*voice reply should not start when user returns from launched app - fixed
+(special feature if 2nd language = hungarian) text messages are always shown full screen even with screen on
+added "Your device" to blacklist by default (thanks David Samual)
*no summary on charger connection if external audio is connected
*no proximity screen off when on power / speak only
~wave to mute when on charger
*detect bluetooth headset and power connection on initial app run (or after reboot) → will even start summary
2.00 MAJOR UPDATE
+full screen gesture: down swipe = pause + option buttons (mutes voice when buttons already shown)
+full screen gesture: up swipe = dismisses notification (clears it from the notification bar)
+button on full screen: reply = voice input answer (for messaging notifications)
+menu item: "Select messaging apps" = mark apps with reply capability
+menu item: "Auto show reply button" = automatically show buttons for messaging notifications
+menu item: "Voice prompt after messages" = voice prompt to reply for messaging notifications
+menu item: "Messaging apps use 2nd language" = inhibit identifier based language check for messaging notifications (for languages with English characters)
+menu item: "Prompt to unmute" = show unmute button on full screen if volume muted
+intent command button:0/i/s/2 = auto show buttons for messaging notifications
+intent command prompt:0/i/s/2 = voice prompt to reply for messaging notifications
+intent command show:0/i/s/2/w (to control fullscreen notifications)
+colorful tour wizard for first time users
+notification listener crash recovery (after Play Store update and otherwise if something goes wrong, no need to reboot to get it back)
+0-20sec delay for app notification sounds before single announcements (it will now mute the music only before it starts to talk - only when displaying the full screen notification.)
+"hot" messaging app status: 5min special treatment for app which you replied to
+foldable menu groups (with preview icons!) in advanced view => hopefully easier to navigate
+new quick action toggle in the persistent notification of the app (we used to have a "Settings" button in the center position, but it just had the same effect as tapping the notification itself) More info on this at http://notifications.dataglobe.eu/index.html#notification
~look of settings menu: sections headings are more emphasized, margins reduced to show more
~menu item: "Select secondary language" (choose locale from list of available locales instead of typing their codes)
~menu icons: Active voice commmands, Black list, Say each once, Identifier characters, Email dev
~menu text: Device andministrator, Secondary langauge, Enable swipe gestures
~full screen help drawing: to include new gestures
~default setting: Full screen notifications = "Always display + wake phone"
~default setting: Automatic summary = (wired + bluetooth) + car dock + desk dock
~default setting: Amount of detail shown = Expanded content shortened
~default setting: Pre-announcement delay = Wake to show notification
~menu category headings slightly changed wording: "WHEN to start the read-out", "WHAT to include in the read-out", "HOW to read them out", "VOICE I/O (Messaging & Language)"
~TTS engine and speech rate moved from "HOW" to "VOICE I/O"
~Device administrator setting moved from top of the advanced menu to the very bottom in the "FEEDBACK" section
(logic: most of my feedback is from infuriated people who can't uninstall the app, maybe here they will notice the reminder)
~Some menu items changed wording: "Start summary when connected to"
~New option under "Immediate read-out": "Always + show always"
~Notifications will wake the device if either the pre-announcement delay is set to "wake" OR the full-screen notifications are set to wake device (it used to be AND condition)
~the "car" intent (tasker) command now handles all 4 options: n/h/a/f
*handle exception for non-bitmapDrawable icons
*strange "Page Buddy" notification fixed (and similar others)
*summary sort order didn't work, nobody noticed
*proximity sensor turned off on user interaction
*queued single announcements when they wake up the screen
*if auto voice prompt was enabled (pulling down and) pressing the mic button prompted to send empty message
*notification listener watchdog improved
*switching between basic/advanced mode used to start a new instance of application, fixed (and this lead to...)
- notification listener menu item removed (the app automatically prompts you to access it) This was the first removal in the life of the app
1.51
+clarifications
*improvements, fixes
1.50
+new trigger: car/desk docking
*fixes
1.49
*no interruption in music if "keep playing" is selected
+skip notification, if it is exactly the same as last
1.48
+new intent commands: shake, wave. Both can be y/n. Multiple commands in one intent: comma separated car:h,shake:n,wave:y
~kitkat style settings icon (gear as in app icon!)
~fade in at wake / fade out at sleep
+dual Bluetooth + media/notifications stream 4.4 workaround
*boot crash fixed when no connection triggers were selected
+in app bug report now can include all your app settings in the email → app support made much easier
*better in-call detection to abort any announcements
~more informative in-app instructions
+new icons
*various other fixes and improvements
1.47
+full screen notifications are shown in front of the lock screen (security or keyguard)
~if the default "Media" stream is selected, the speech functions from version 1.45 are used. This is an attempt to solve a TTS compatibility issue.
~message splitting is only used when a second language is enabled
*removed [] and | characters from spoken text (it's annoying how SVOX would read them out)
*excluded apps are propagated to immediate readout service right away (settings + 2 fingers)
*text message read-out improved
*business calendar tells you in how many minutes the announced event is going to be (more apps will follow)
*missed call announcement fix (truncated names)
1.46
*More intelligent notification fetching
*Much improved Gmail notifications
+Audio stream selection (advanced settings / "how to read" section) → BT mono included as experimental feature = tested to work on Android 4.3, not reliable on 4.4 yet
1.45
*Improved compatibility with 4.4 notifications
1.44
+New: various hints&tips are displayed at the end of each Test summary (only when started from the settings using the Test button)
*If you never switched to advanced mode the default "Notification" icon disappeared from the launcher, making it impossible to start the summary by saying "Open notifications"
1.43 (Pentecost sale)
+Quick settings screen with only the most essential options (on phones. Tablets have a hierarchical settings screen)
+Test and language icons updated
+Built in help updated
1.42
+incoming calls will abort non-displayed immediate announcements too
*install-location: internal only (does it install on HTCOne now?)
*fixed 2 kinds of force closes at incoming calls (sorry about them)
*improved reading out expanded notification text (gmail, hangouts etc)
1.41
*Google+ comments notification
+Notification bar actions: toggle car mode, settings, start summary (expand notification using two fingers) - added on user's request
1.40 (5/28)
+pre-announcement options added
+wake phone to show notifications when not in pocket (in mode "car:always")
~Built in help extended with new features http://notifications.dataglobe.eu
~small aesthetic + spelling fixes in app
~proximity sensor turns screen off quicker (in pocket)
~new/revised icons (notification bar follows Android guidelines)
~slightly smoother screen on / off (I wish it was even smoother)
1.39 (5/22)
+ NEW PERMISSION: WAKE LOCK (to wake phone, optional)
+ pre-announcement warning: yellow LED light + click sound + 3 sec delay
~ two finger swipe pauses read-out until choice is made
+ wake phone to display notifications (new option in setting: Full screen notifications)
+ feedback section in settings (bug report, app rating, google plus community)
~ only audio bt devices will trigger bt headset
* improved notifications (removed some text duplication)
1.38 (5/18)
b1* better notifications for S Planner and Business Calendar (Pro)
b2* better text message notifications
b2* smarter color matching
b3* headset state got forgotten: had to replug. Status storage moved to HeadsetMonitoringService
b4+ immediate notification delay and intro sound (there's a click and 3 seconds of delay before announcement if wave to mute or shake to mute is enabled)
b4+ control "immediate mode" using intents (tasker or other apps - for details see built in help or here)
1.37 (5/15)
* urgent fix: would speak during calls if "keep music playing" was selected for "Music interrupt". TN will never speak during call, under any circumstances. - fixed on user's request
+ New voice command option: "(Show) what I missed"
~ Free version will remind less frequently
* Expanded notifications were trimmed but the new version will also trim the collapsed notification's second lines if too long (e.g. IMDB notifications)
~ most on/off sliders were replaced with less space consuming check boxes in settings
+ new icons for these options (now they fit)
(this update will quickly be moved to production if no side effects are reported)
Join the Touchless Notifications Google Community to become a tester.
1.36 (5/10)
* fixed incompatibility with Google Voice Search 3.4 in car mode
+ Wave to mute: wave at the phone to mute immediate announcements when the phone lays flat on its back (great for "always" car mode - with no display - and phone flat on desk)
~ rewired: display-less announcements now use service, not activity => incoming notifications will not switch away from certain apps
* says "a number starting..." in sms text for numbers not in your contacts (doesn't blabber all 10 digits only the first few)
* more ways to say "updated its notification"
* colors, circles
1.32 (5/3)
~ incoming notifications are queued if they come in while another one is being announced
* headset/power connection disregarded if announcement is already in progress
1.31/beta
* hardware keys didn't work during display-less announcements
* proximity sensor detection fixed
~ proximity sensor behaviour updated: screen now turns off as soon as something is detected near the sensor (in summary mode only)
* temperature reading inconsistencies fixed: it can now tell you the temperature even with screen off, or display-less read outs
1.30 (4/30)
+ car mode = announce new notifications as soon as they appear (repeating notifications and notifications without content are suppressed) - added on user's request
+ music interruption control = keep playing / pause / lower volume (podcast players may choose to pause on requests to duck)
+ display control = show notifications or not during read out (notifications are never shown when car mode is set to "always" and no headphone/bluetooth is connected)
~ variations on "about"
~ test button in settings will replay last summary
* summary after single announcements
* "the last one was sent to you" is not said in car/headset mode
~ shake detection mutes quicker
~ new, higher resolution app icons
1.22 (4/22)
+ extensive online help
1.21 (4/20)
~ greeting hint in settings "e.g. 'Hello'"
+ add "days ago" for notifications older > 48hrs
+ player checks for notification access and goes to settings if necessary
1.20 (4/17)
+ swipe left (down in landscape) to skip ahead
+ two finger swipe to put app on exclusion list
~ illustrations in settings
1.16 (4/16)
~ custom greeting: disable greeting, include custom greeting in name
+ new option: animated slide transitions
1.14 (4/15)
+ pro imports settings from free before uninstalling
+ free switches to pro if both are installed
+ alternate voice command options (launcher icons) See details here.
* overflow text is trimmed in itemised reading
1.12 (4/13)
+ new different icon for settings app
+ mute / switch away instructions toast
~ text sizes unified across different screen sizes
* some repeated text eliminated in notifications
1.11 (4/12)
~ uninstall directly without going into Play Store
* 4.4 crashes: isValidFragment
1.1 (4/12)
* Spelling mistake "turn off"
~ Greeting: good evening (0:00-2:59)
~ Shortened the maximum headset delay from 5 min to 90 seconds
* Settings screen didn't appear during headset delay
+ Announcement cancelled if headset is disconnected during delay
+ Prompt to uninstall the free version when pro is installed
1.0 Initial version (4/11)
Future Features
Items on this list are implemented as the userbase grows. The numbers represent a tentative priority based on difficulty, importance and number of user requests. I may implement an idea from lower in the list, or postpone another infinitely.
You can motivate me with good Play Store ratings and upgrades to Pro Please recommend the app.
Wildcards in the pronunciation / blacklist by phrase
option to filter out/shorten phone numbers (Number starting XY...) and URLs (xy.com "url")
100% handsfree for regular text (SMS) and email (gmail). These are the only two services left which are not locked down
Dial option for numbers in SMS and missed calls?
Announce notification changes (music apps - new song e.g. Spotify) They work on Lollipop devices, if not, it's not possible
Special treatment for time/phone numbers in notifications (time: say how much time to or since, phone: only say the first few digits) ~ already doing in some cases
Language detection based on unread part of the expanded text too
Localization (Hungarian, Polish, etc)
Show contact icons (notification icon) instead of app icon
Deeper integration with certain apps (Gmail, Messages: read all texts from the past hour, or all unread texts, or new texts from one person), reply by voice without paste etc.
Pause, rewind summary readout + Repeat!
Contextual messages: amount of time since last summary, temperature change since last readout, voice command dependent greeting
Message queuing with voice-only notifications too
Announce caller's name over bluetooth Might not ever be possible in new Android versions
Completed:
Smarter language identification (letter combinations / stop words / statistical method?) Dutch, German, French, Spanish → 3.15beta
Command to have the entire expanded notification be read by https://play.google.com/store/apps/details?id=com.hyperionics.avar → 3.13beta
Option to skip blank notifications (when only the app name is known) → 3.0beta1
Optional full immersive mode (On 4.4+) → 3.0beta1
Display only mode (no talk) → 3.0beta1
Option for no readout when screen on (similar to no full-screen notification currently with screen on unless headset is connected) → 3.0beta1
Revised trigger system: time, wifi, docking, charger, bluetooth, headset, volume-level → more flexible control of what should happen → 3.0beta1
Cancel summary read-out when triggering connection is disconnected → 3.0beta1
Widgets to control some settings (mostly those which are available from the Tasker plugin) → 3.0beta1
Mute immediate notifications for a time period → 3.0beta1
↓
Backup / restore / reset settings → 2.08beta
Make "amount of detail" a multiple choice list where you can toggle individual components independently → 2.08beta
Option to permanently opt out of Device Admin (no more bugging) → 2.06beta
Master switch to turn off and unload TN from memory → 2.06beta
Black list new apps by default → 2.05
Keep track of message body in WhatsUp and Hangouts and don't announce accumulated text in immediate readouts →2.03
Free-text black list to exclude only certain notifications from the read-out →2.02
Native Tasker plugin, export more options →2.02
New immediate readout trigger: wifi network connected Use Tasker to achieve this →2.02
Dashboard control (icons only: toggles) →2.00
Delay immediate notification read-out by a configurable length of time (more universal than the 3sec pre-warning) →2.00
Setup / introductory wizard →2.00
Ability to change the default language from English (~ forced secondary language option / per app) →2.00
Voice response to messages (start voice search after message) →2.00
Silent / Vibrate warning / prompt at the start of the summary read-out →2.00
Make Notification actions available on the full screen notification →2.00
Notification dismissal →2.00
Secondary language / region selected from menu →2.00
Pause summary readout →2.00
Store notification text, do not announce it more than once if it doesn't change (a cure for Goolge Now frequent weather updates) →1.49
Update settings icons to kitkat style →1.48
TTS on dual streams voice + media [4.4 BT mono compatibility] →1.48
Smoother fade-in, fade-out when phone woken up for immediate read-out →1.48
Voice command alternatives
From version 1.14 you are not limited to the voice command "Open notifications".
Under "When to say" in Settings you can currently select from 3 alternatives, and more may come in the future:
►(Open) notifications
►(Fire up) my notifications
►(See) what's up
►(Show me) what's up
►(Start) summary (NEW)
►(Play) what I missed (SOON)
►(Play me) what I missed (SOON)
The command in brackets can be any of the action words Google Voice Search recognizes for launching apps. Here is the list I found to work in the current version on Google Now:
►Open... ►Start... ►Show... ►Play... ►Run... ►Execute... ►Launch... ►Fire up... ►Load... (There might be many more
These only work with some of the commands (what's up, what I missed...):
►Show me... ►See... ►Play me...
So currently, if you configure Touchless Notifications to have the "My Notifications" launcher icon, you will be able to say:
►Start my notifications
►Play my notifications
►Open my notifications
etc.
One app, several icons
You can mark any or all of the voice commands in the Settings. The app will enable a launcher icon for each (that's necessary for Google Voice Search to recognize them as apps, which it can open). So if you enable all of them, you will end up with these four icons:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The last one with the Gear of course is the settings. To reduce clutter in your app tray, you might want to gather them into a folder of their own.
Alternatively you can disable all action icons, then you won't be able to start the announcement neither using Voice Command nor by clicking on an icon, but if headset or power connection monitoring is enabled, the app will activate itself.
S for Switch Voice Pro users don't need any action icons either for the Offline mode activation.
Your input is welcome
Finally, I would like to invite you to come up with launch phrases which might feel more natural to you. These need to be "wired" into the app, so there will be a limit on the selectable alternatives, but we can add a few more. Let me know what voice command would you like to use:
►"(Start) briefing me"?
►"(Run) summary"?
►"(Launch) notification reader"???
I'm open to your suggestions regarding these and any other function of Touchless Notifications.
"Greeting text" dependencies
View attachment 2692015
Great App!!! I am using it in a car setup, I want it to automatically read the text as it comes in, instead of having to launch every time. Anyway I can force it to start whenever a new notification occurs? Tasker set up perhaps? If so I will be buying the pro version.
Notification announcements as they come in
gnice18 said:
Great App!!! I am using it in a car setup, I want it to automatically read the text as it comes in, instead of having to launch every time. Anyway I can force it to start whenever a new notification occurs? Tasker set up perhaps? If so I will be buying the pro version.
Click to expand...
Click to collapse
Great idea, announce notifications as they come in. There are other apps which offer this, for example Enhanced SMS and Caller ID. But AFAIK it cannot announce all notifications and doesn't show them as my app does.
I will look into how I could incorporate this into Touchless Notifications. Maybe there could just be one new toggle, to announce incoming notifications while the headset/bluetooth connection is active (i.e. you are connected to the car hands free).
Until I get to implement this, you can use this simple Tasker profile to launch Touchless Notifications when a new notification appears:
Profile:
Notification *,*
Task:
Launch App "Touchless Notifications"
(to be able to catch all notifications you will have to enable the Accessibility functions of Tasker). Good luck, and I will keep you updated
Touchless Notifications 1.30beta (NEW: with car mode)
Here is a preliminary release of the new version with car mode:
1. You can choose to have notifications read out as soon as they appear: ideal for car use. Choose if you would like the notifications always, or only when bluetooth or wired audio is connected.
New terminology:
single announcements = notifications as they come in
summary announcement = the original "what's up" style briefing which lists everything active.
2. Starting with this version you can choose only to hear and not to display the notifications. You can control this separately for singe and summary type of read outs:
Never
During summary read out
During immediate read out (this is an unlikely choice, it might disappear in the final version)
Always (in both cases)
3. Starting with this version you can also control how other audio is handled when Touchless Notifications starts to talk:
- keep the music (or podcast) play in the background
- lower the volume of the music in the background
- completely pause the music for the time of the announcement
You can again set these separately for single and summary type of announcements:
Always keep playing
Lower its volume for summary (keep playing for single)
Always lower its volume
Pause it for summary (lower volume for single)
Always pause it
All the changes:
+ car mode = announce new notifications as soon as they appear
+ music interruption control = keep playing / pause / lower volume
+ display control = show notifications or not during read out
(notifications are never shown when car mode is set to "always"
and no headphone/bluetooth is connected)
~ variations on "about"
I am grateful if you can give this a whirl, and if you can let me know how it works for you!
4/27 UPDATE: see newer beta 2 posts below
Stumbled across this app today itself and must say superb! Been wanting something like while driving.
Will be testing this beta out in detail, particularly with tasker integration with my car profile. Will update soon.
1.30beta2
windieboss said:
Stumbled across this app today itself and must say superb! Been wanting something like while driving.
Will be testing this beta out in detail, particularly with tasker integration with my car profile. Will update soon.
Click to expand...
Click to collapse
I've been testing this version over the weekend and here are a few fixes:
* some notifications were not read in "single"/"immediate" mode
* some were read several times
~ other minor fixes
To become a beta tester of the Pro version please join this Google+ community: Touchless Notifications Beta testers
How to start Touchless Notifications with the "What's up" command
I posted this as a youtube comment, but include it here too: You will see that I can simply say "What's up" on my phone to start Touchless notifications (http://youtu.be/7dTw--5bg6Y?t=1m33s)
As I list it in the video, quite a lot is involved. Here is a list of apps you will need as a starter:
Tasker https://play.google.com/store/apps/details?id=net.dinglisch.android.taskerm (paid)
XPosed installer http://repo.xposed.info/module/de.robv.android.xposed.installer
Google Search API http://repo.xposed.info/module/com.mohammadag.googlesearchapi
Autovoice plugin for tasker https://play.google.com/store/apps/details?id=com.joaomgcd.autovoice (paid/iap)
and of course:
Touchless Notifications
Free https://play.google.com/store/apps/details?id=hu.viczian.notifications.free
or
Pro https://play.google.com/store/apps/details?id=hu.viczian.notifications.pro (paid)
Install all of the above
Here is a most simple tasker profile / task:
Code:
Profile: whatsup
Autovoice Recognized Event Behaviour: true Command "what's up"
Task: whatsup
Launch App "Notifications"
But of course you don't need any of these (except for Touchless Notifications) if the command "Open my notifications" does it for you instead of "What's up".
You can also say any of these:
"Open notifications"
"Play what's up"
"Show what's up"
"Launch my notifications"
"Open what's up"
etc
etc
More on this here: http://goo.gl/03tZLl
New beta is out (1.30beta3)
This is probably the last before release. Fixes: Notification read out and repetitions are all cleaned up
► when you only listen to summaries, Touchless Notifications keeps track of which have been read already and doesn't repeat them (unless you turn the option off)
► if you cancel a read-out by shaking the phone or by pressing the back key, those will be re-announced in the next summary
► if you enable single (immediate car/headset mode) read-outs, they are not going to be included in the next summary
► exceptions to this are the notifications which were read out while you didn't have the headset / bluetooth audio connected. These are included in the next summary
► The operation of the test button in Settings has been changed: it will replay all the notifications as if the previous summary hadn't happened (kind of like a re-read function, but it might include new notifications which came in since the last summary)
►repetitious notifications and very short notifications (just telling you one app appeared in the notification bar) are not announced in car/headset mode
Available on the beta channel: https://plus.google.com/u/0/communities/100847829964200965231
See how it works for you
New version with major new features - new app icons
Before:
After:
New 1.31beta1
Changes:
* hardware keys didn't work during display-less announcements
* proximity sensor detection fixed
~ proximity sensor behaviour updated: screen now turns off as soon as something is detected near the sensor (in summary mode only)
* temperature reading inconsistencies fixed: it can now tell you the temperature even with screen off, or display-less read outs
Join the Touchless Notifications Google Community to become a tester.
500+/100+ Free/Pro versions
Because the display-less notification read-out was added to the application as an afterthought, currently the readout is implemented using a "@android:style/Theme.NoDisplay" activity. This is an okay, but far from optimal solution though. This way I have started to work on transforming the backbone of the app into a service instead, which needs to interact with the display activity when requested.
This conversion is expected to take a longer span of time. Alpha and beta versions will appear for those who signed up to receive early releases.
I keep you posted on the progress.
New 1.33beta
* fixed incompatibility with Google Voice Search 3.4 in car mode
+ Wave to mute: wave at the phone to mute immediate announcements when the phone lays flat on its back (great for "always" car mode and phone flat on desk)
~ rewired: display-less announcements now use service, not activity => incoming notifications will not switch away from certain apps
* says "a number starting..." in sms text for numbers not in your contacts (doesn't blabber all 10 digits only the first few)
* more ways to say "updated its notification"
Available on the beta channel. To become a beta tester join: Touchless Notifications Google+ Community
New 1.36beta
+ Colors
+ Circles
(both based on application icon colors)
All Touchless Notifications in a single image
Calendar Notifications
I started to work on proper calendar notifications.
Currently it would say things like
"Business Calendar Pro notification: Meeting with Andy Webber - College Hall 6:00, College Hall (Zoom to expand)"
which is not the most friendly. What makes this task complex is the fact that there are so many different calendar apps and they can have so many different notifications.
I can make it work with the stock android calendar, then maybe S Planner which comes preinstalled on Samsungs. Then Business Calendar which is pretty popular and the one I am using. Then? Maybe users should be able to pinpoint the Calendar app they are using and I will try to parse its notifications for start time and description... Or should I look directly into the calendar data stored on the phone?
Waiting for inputs on this. Is this an important matter? Any good ideas?
New 1.37beta
New voice command option: ►"(Show) what I missed"
~ Free version will remind less frequently
* Expanded notifications were trimmed but the new version will also trim the collapsed notification's second lines if too long (e.g. IMDB notifications)
* would speak during calls if "keep music playing" was selected for "Music interrupt". TN will never speak during call, under any circumstances.
~ most sliders were replaced with less space consuming check boxes in settings
+ new icons for these options (now they fit)
v1.38b3
New beta 1.38b3
b1* better notifications for S Planner and Business Calendar (Pro)
b2* better text message notifications
b2* smarter color matching for circle and text
b3* headset state got forgotten: had to replug. Status storage moved to memory resident HeadsetMonitoringService (hopefully fixes it)
Hey everyone. Anyone here use Tasker or any similar app. If so so what are your favorite profiles or things to do with them?
tEcHsAvY said:
Hey everyone. Anyone here use Tasker or any similar app. If so so what are your favorite profiles or things to do with them?
Click to expand...
Click to collapse
Use search
I'm a long time Tasker user and cannot think using any device without it.
The main thing I use it for are:
- automatic change of audio volumes based on time and location;
- hourly chime;
- missed notifications reminder;
- automatic switch GPS ON/OFF when using maps;
... Other little things depending on specific ROM I'm using ...
Macro droid is pretty good, A tad easier to setup tasks
For me, Tasker knocked me down. I use Automateit Pro, a little bit more user friendly and does the job accurately.
tEcHsAvY said:
Hey everyone. Anyone here use Tasker or any similar app. If so so what are your favorite profiles or things to do with them?
Click to expand...
Click to collapse
I am using macro droid. Its really smooth and user friendly. Not as versatile as Tasker may be but it almost serves all the needs with more macros. It was my first purchase from google play.
Only use it to turn volume down when I arrive at the office.
Tasker and Secure Settings. I use it to:
1) Set ringtone to vibrate between 11pm to 6am
2) Trigger high accuracy GPS when I open waze.
3) Auto rotate only when in the camera, gallery, youtube and a few others.
4) Switch between edge and HSPA (to save battery) i.e. only swtich to hspa when youtube, web browser or app that needs a fast data connection is active.
5) Send emergency SMS to certain people when battery reaches to 10% (hardly ever happens but hey safe than sorry)
6) Switch to car mode (app) when connected to my bluetooth headset.
7) Open up emulator when game controller is connected.
8) When within range of my home town cell tower, switch on wifi, similarly when out of range of the tower, wait 2 mins then switch off wifi.
amd-dude said:
Tasker and Secure Settings. I use it to:
1) Set ringtone to vibrate between 11pm to 6am
2) Trigger high accuracy GPS when I open waze.
3) Auto rotate only when in the camera, gallery, youtube and a few others.
4) Switch between edge and HSPA (to save battery) i.e. only swtich to hspa when youtube, web browser or app that needs a fast data connection is active.
5) Send emergency SMS to certain people when battery reaches to 10% (hardly ever happens but hey safe than sorry)
6) Switch to car mode (app) when connected to my bluetooth headset.
7) Open up emulator when game controller is connected.
8) When within range of my home town cell tower, switch on wifi, similarly when out of range of the tower, wait 2 mins then switch off wifi.
Click to expand...
Click to collapse
Do any of these require root?
I can't recall but I think secure settings requires root, someone correct me if I'm wrong. Most of them don't. Secure settings trigger different gps modes.
Ok cool thank you
Llama - is similar, as some alright features
I personally went for tasker and added secure settings
After 3 failed unlocks, takes picture on front cam and logs location
when face down, set phone to silent
when near home or work turn wifi on
when at home and connected to wifi, turn lock off
when connected to bluetooth in car turn lock off
on boot set lock to on
similar to others... other additions:
> read SMS sender and text contents while connected to car bluetooth [developing] (anyone know the right audio channel to play notifications through?)
> shake vertically to lock device (too big to always reach power button)
and per someone's earlier question yes you need root for secure settings to do most of its worthwhile tasker actions. although my secure settings is not working for enabling/disabling pattern unlock in 5.0 [liquidsmooth v4.0 unofficial]
I mainly use it to control the lights at home. I haven't been able to think of any other use cases for me
c8503 said:
> shake vertically to lock device (too big to always reach power button)
Click to expand...
Click to collapse
want to share this? looks a bit nifty
Below are the Tasker Profiles that I use:
1. Turn Wifi On when I'm connected to a cell tower near home. Turn off when I exit.
2. Notify to take my ID card when disconnected from wifi (reminds me in the elevator)
3. Turn on silent mode when I'm connected to a cell tower near office.
4. Switch to 2G when screen is off.
5. Turn on location for Maps, Uber, etc. Turn off when not using.
6. Increase the display timeout when using Feedly, Facebook, Play Store, etc. Change it back to 15 secs when not using.
Hampa_D said:
want to share this? looks a bit nifty
Click to expand...
Click to collapse
Superquick:
New Profile "Shake it off" > Event > Shake Backwards & Forwards > Sensitivity = High, Duration = Medium > New Task "LockSystem" > If %SCREEN ~ on > System Lock
Note the "IF Screen ~ ON" otherwise while your phone is in your pocket it will keep locking which is not a problem untill you try to run with your phone playing music and you get the lock sound effect every step you take
The "Shake Backwards-Forwards" is not intuitive but the shake actions are sort of misnamed in tasker. This locks the phone if you shake it up and down vertically [insert masturbation gesture here].
The medium duration is also key so you get the right kind of threshold for not having the screen go off while you ride the bus but also not having to shake it for a while.
<3
Tasker, AutoVoice, Secure Settings
- Set Silent mode as soon as connected to WiFi at work
- Turn off mobile data when connected to WiFi
- Invisible unlocker to unlock phone from locksreen
- Change input method when i take out the pen on my Note 3
- Read my calendar for work events and set my alarm accordingly
Tasker, AutoVoice, Secure Settings
- Set Silent mode as soon as connected to WiFi at work
- Turn off mobile data when connected to WiFi
- Invisible unlocker to unlock phone from locksreen
- Change input method when i take out the pen on my Note 3
- Read my calendar for work events and set my alarm accordingly
Tasker with OnePlus One
Hello,
I am using Tasker with some of the following tasks/settings...
Sound and Timeout profiles for Home, Out, Work and Night situations.
Toggle between different screens in Lightning launcher for Home, Out, Work or Night situations.
They than look similar to the Smart Screen Launcher screens.
Capturing notifications and displaying them in situations when I want them to appear, including sound and/or vibration.
Retrieving Sunrise/Sunset times and weather information, displaying the info via Zooper Widget.
Setting different wallpapers according the time and location during the day.
Adding the current location to for instance Evernote (like the app Where Am I).
A working time registration including reporting worked hours.
-Tasker
-Lightning Launcher
-Zooper Widgets
-AutoNotification (plugin for tasker)
-AutoLocation (plugin for tasker)
-AutoLaunch (plugin for tasker)
-Email Me (plugin for tasker)
There is so much you can do with tasker
Regards, Rob
Only for testers - No direct support by me !!!
Hello everyone, I was browsing through the S23 Ultra forum and came across the topic "Soul - ROM".
Of course, I was directly interested and wanted to learn more about it. I was able to find some reports about the ROM in the S22 Ultra forum.
It should have a very good SoT regarding the battery and offers some features.
The ROM is probably a paid ROM, which is free in the first week. To what extent the ROM is affected after that I can not say.
I can't say anything about the VIP status, either. (I assume however that it concerns the version).
Spoiler: About the Soul ROM - Translate from Chinese Website
Please recognize this Taobao store and keep it updated, and do not trust any other contact information.
I will not be responsible for any economic losses caused by contacting other people.
Supported models: ● S23 series European version (SM-S918B/SM-S916B/SM-S911B) models
Exchange group: 772862135
Download address (including flashing tools and tutorials): Link: https://pan.baidu.com/s/1hhVMkp3pZDkANMEn0ZdHmw Extraction code: 1314
S23/S23+/S23U_S91XX_VIP1
1. S23U is based on the latest Android 13, OneUI5.1 official S918BXXU1AWBD bottom package, S23+ official S916BXXU1AWBD bottom package, S23 official S911BXXU1AWBD bottom package production
2. Bank of China features, streamline a large number of useless APPs
3. Crack the signature Crack font restrictions
4. One-click installation with built-in LSP framework
5. Support NFC analog access control
6. Marquee (alarm, call, music playback)
7. Free definition of virtual button height (can be hidden, the system has a floating ball, and slide up gestures , edge gestures, support Bezier animation)
8. Icon themes, third-party icon packs can be used, front camera flash
9. Integrated system tools independently developed by Soul: Soul fine-tuning
10. Soul module supports one-click installation of xposed modules, automatic With mainstream functions (fingerprint payment, grab red envelopes, anti-withdrawal, motion acceleration, Alipay assistant, Douyin assistant, simulated positioning)
Soul fine-tuning function introduction:
[Connection]
WLAN status: display the ssid and password, IP and gateway of the connected
wifi
. Prohibit pop-up stk operator dialog box after booting Mobile network: modify mobile network type preference Network settings: modify mobile network frequency band preference 5G network mode: set SA, NSA mode Volte HD call: switch volte HD voice
[Sound and Vibration]
Full charge ringtone: set the full charge reminder sound
only once: full charge ringtone can only remind once
Voice announcement: voice announcement full charge reminder
Enable music spectrum: display spectrum information on the screen when playing music
Allow movement: allow Move the music spectrum position
Spectrum type: Set the music spectrum display style Sound decibel : Detect the sound decibels
of the current environment Time: Custom reminder time Text-to-speech engine: Set the default text-to-speech engine, the kernel Microsoft text-to-speech engine voice broadcast Incoming call: When there is an incoming call, the voice reads out the contact Voice ringtone alternately: use voice and ringtone to play from Definition format: Customize the format of the voice broadcast text content Power status voice broadcast: broadcast the battery status when the power is connected/disconnected Long press to read aloud: Long press the text to read aloud Voice broadcast text message: When a new text message comes, the voice reads out the text message The content is inserted into the earphone to broadcast: the content can only be read out when the earphone is inserted
[Notification]
Side screen flash management: Set the parameters of the side screen flash and the side screen flash application (marquee)
Front camera flash: Turn on the front camera flash function, which can be used as an LED notification light
. Notification Bright screen management: Allow specific application notifications Screen-on
voice broadcast notification: Allow specific applications to read out notification content Notification prompt management: Allow specific applications toast
to display notification content Flash blinks when there is an incoming call
[Status Bar]
Hide Status Bar Icon:
Customize the icon to be hidden in the Status Bar The lunar calendar is displayed under the date Signal on the left: Move the signal icon to the left Display the operator: Display the operator information on the right of the signal Custom operator: You can define the operator's text information Battery percentage Font size: Set the font size of the battery percentage Enable Soul battery Icon: You can replace the official power icon (dozens of icon styles are built in ROM) Status bar power icon: Choose the built-in power icon style Allows you to define the color of the power icon: After opening, the color does not change with the system Power icon color: Customize the power icon Coloring Hide Soul battery icon: Hide Soul battery icon in the status bar Battery icon size: Set the size of the soul battery icon Network speed: Set network speed display in the status bar Dual network speed display: Display upload and download network speed Network speed font: Set network speed Font size Custom text in the status bar: Set the custom text type in the status bar Date format: You can change the date format type when the defined text is a date. Position of the custom text: Set the display position of the custom text in the status bar Time display seconds: Set Status bar time display with seconds Status bar clock style: Set the position of the status bar time, the default soulrom is on the right, you can set the heel to the left Time text: Set the text type of the time band Date format: You can change the date when the time text is set to date format type Time text display position: Set the position where the time text is displayed Time text
size: Set the time text font size
Status bar left slide: Set the status bar left slide action gesture
Status bar right slide: Set the status bar right slide action gesture
status bar Long press : Set status bar long press action gesture
status bar double click: set status bar double click action gesture upper
left corner of status bar single click: set status bar upper left corner click action gesture
status bar upper left corner long press: set status bar upper left corner long press action gesture
Click on the upper right corner of the status bar: set the action gesture on the upper right corner of the status bar
Long press on the upper right corner of the status bar: set the long press action gesture on the upper right corner of the status bar
Linear power: display the linear power on the screen
Display position: set the display position of the linear power
Linear Width: Set the height of the linear power
Linear Width: Set the width of the linear power
Linear background color: Set the background color of the linear power
Linear foreground color: Set the color of the remaining power of the linear power
[Display]
Eye protection at night: You can set a lower brightness than the official one, and use it at night to protect your eyes
Blue light mode: Another mode for eye
protection Screen brightness: You can adjust the brightness value of eye protection
at night. Eye protection
Global dark mode: Force all apps to try the dark mode
Screen color: Switch the screen to black and white mode
Outdoor mode: Turn on a brighter brightness than the official one Suitable for outdoor
Animation speed: Fine-tune the animation speed of app transitions
Automatically shut down the screen: Settings Screen mode
: You can set Amoled cinema or Amoled photo mode
Global refresh rate: You can set 120hz or 96hz globally
Screen resolution: Customize screen resolution
Font management: Download and install your favorite fonts
[Home screen]
Icon theme: You can apply the third-party icon theme package downloaded by Kuan.
Custom icon: You can customize the icon of other unsuitable applications based on the third-party icon package.
Application name: You can customize the display of the application name
...
(You can find pictures on the website.)
Nevertheless, I took the trouble to download the ROM data for the Samsung S23 SM-911B (EU) from the website "SoulUI" and upload it to my MEGA account again. (Since the official download away is quite complicated).
I'm currently using Dr. Ketan's ROM for my S23 SM-911B/DS (as a paid premium full version) and don't want to make a switch currently, as I've just freshly updated my device.
However, I think we have some tinkerers here in the forum who like to test and report.
A like to thank is enough.
To the downloads (Klick ME)
Please check independently for viruses and co. before use!
Attention, I do not receive or ask for money, this topic is for information and testers only. - Exchange of experience.
If I violate any rules in the forum, I ask for deletion of the topic.
Greetings Ramme
Soul's rom is official of S91xB package with csc for S91x0, plus some settings of Soul，we must be alert to this romer
did anyone test it?