Database Develop

Need Odin3 1 click/stuck on boot screen

So I flashed my phone to Phoenix and was going wonderfully. Flew into St. Louis from Oklahoma and the phone froze up. It's now stuck on the AT&T boot screen. Occassionally after doing a battery pull and turning it on, the Phoenix boot screen will come up and I've gotten it to the lock/unlock screen but is unresponsive to touch.
Occassionally it even has what almost looks like colorful static on the screen. So now I'm in a completely different state without my home laptop for a week with the Odin3 1 click and am unable to find a download link for it.
Help would be appreciated. I was hoping to get the phone into recovery to try and flash back to stock or reflash Phoenix but it just stays stuck on the AT&T boot screen now.

remove battery, put battery back in, hold up+down vol buttons, plug in usb.
you'll be at download mode, then use odin.

Chillyw said:
remove battery, put battery back in, hold up+down vol buttons, plug in usb.
you'll be at download mode, then use odin.
Click to expand...
Click to collapse
Do you have an Odin download link? The Odin link on the site isn't good anymore and google isn't helping

here's an alternative link I've used:
http://www.mediafire.com/?0w2y31maz8mdom4

I appreciate the help so far and the Odin link. I managed to get Odin downloaded. I managed to get my phone in download mode. However, Odin is not registering that there is any phone. Normally I'd see a COM but nothing is showing up.
I started by running Odin.
Then got my phone in download mode.
I can't get any farther.

Do you have the drivers installed on your PC ? I also read somewhere where you have to have the latest net frame work as well...If you do...you might have a bad usb cord...and here in St.Louis..there are a lot of AT&T stores you can get one..
Mac

Well, on the original thread that had the link for Odin has the 32/64 Samsung drivers. I downloaded the drivers zip file to the desktop of the laptop.
One thing I find strange is usually when I plug in the phone to my laptop with the USB cable, the option to view files, etc pops up. It is not on this laptop.

kiltedthrower said:
Well, on the original thread that had the link for Odin has the 32/64 Samsung drivers. I downloaded the drivers zip file to the desktop of the laptop.
One thing I find strange is usually when I plug in the phone to my laptop with the USB cable, the option to view files, etc pops up. It is not on this laptop.
Click to expand...
Click to collapse
Did you install the drivers then ? Sometimes my wife's Samsung laptop does that..and not install anything going to the desktop..If everything is loaded correctly..you 2 drive pop up windows should open..
Also (I'm sure it is) make sure usb debugging is checked on your phone..
Sometimes the most simplest things keeps things from working correctly..
Phone unplugged..in normal mode..usb debugging checked..do not mount phone..
Close Odin
Open Odin
Plug phone in
Put phone into download mode...click start...not master clear...
Mac

Odin is also finnicky about USB ports. If you are on a desktop machine, try using one in the back instead of the front, or if you have multiple sets, try using a different one. I've had Odin not recognize certain USB ports but recognize others before.
Finally, I suspect you already know this, but for sanity's sake make sure you start both the PC and phone up fresh after reboots, open Odin, then connect the phone. Connecting the phone first breaks Odin.

Mac11700 said:
Did you install the drivers then ? Sometimes my wife's Samsung laptop does that..and not install anything going to the desktop..If everything is loaded correctly..you 2 drive pop up windows should open..
Also (I'm sure it is) make sure usb debugging is checked on your phone..
Sometimes the most simplest things keeps things from working correctly..
Phone unplugged..in normal mode..usb debugging checked..do not mount phone..
Close Odin
Open Odin
Plug phone in
Put phone into download mode...click start...not master clear...
Mac
Click to expand...
Click to collapse
Plug the phone in after it is in download mode, otherwise odin might not see it.
Sent from my SGH-I897 using XDA App

skatcat31 said:
Plug the phone in after it is in download mode, otherwise odin might not see it.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
I know...but I have had to do it this way on a couple of times..and let it go into download when it was hooked up already..It's strange..but it worked at that time..after getting the drivers loaded for the first time on the wifes laptop..
Mac

What OS are you running? Are you explicitly starting odin in administrator mode (right-click->run as administrator)?

Okay, so I switched USB ports and it suddenly recognized and it started to download drivers. But it was listed as a gadget Serial and no drivers found. Geez this would be so much easier if I was at home where the laptop is set up with everything instead of being several states away.
Okay, so apparently I do not have the correct drivers installed. I really appreciate all the help so far. At this point, should I just google Samsung Captivate drivers or does someone have a link handy?
I can't get to my debugging as the phone stays on teh AT&T boot screen. I did have it enabled before I left OKC though.

I've gotten teh Samsung modem software successfully installed.

opcow said:
What OS are you running? Are you explicitly starting odin in administrator mode (right-click->run as administrator)?
Click to expand...
Click to collapse
Phoenix 3.0 which is 2.2
The Odin is a zipfile that I have to use winzip to use it. It doesn't have the option to use as an administrator.

kiltedthrower said:
Phoenix 3.0 which is 2.2
The Odin is a zipfile that I have to use winzip to use it. It doesn't have the option to use as an administrator.
Click to expand...
Click to collapse
OS as in, what OS is your DESKTOP/LAPTOP running?
and....you need to EXTRACT Odin from the zip file, and run it as administrator

kiltedthrower said:
Phoenix 3.0 which is 2.2
The Odin is a zipfile that I have to use winzip to use it. It doesn't have the option to use as an administrator.
Click to expand...
Click to collapse
O_O You blew my mind.

Windows 7 is the OS and I finally got Odin extracted and running as administrator

opcow said:
O_O You blew my mind.
Click to expand...
Click to collapse
I know. Flying from OKC to St. Louis and then from St. Louis to Baltimore with a several hour layover has me exhausted and not thinking clearly.
I did manage to reboot it and Phoenix came up. All drivers were showing ready except for ADB and then the phone shut down and ADB said phone was unplugged.
I feel like I'm making headway but just not there.
And why is it I'm staying in an expensive hotel and you still have to pay for net? Geez

I downloaded the 64bit drivers. Ran the exe file.
Extracted Odin and have run it as an administrator
Put the phone in download mode.
Odin is still not seeing anything.
NM....pop up box just said taht device driver software not successfully installed. I think I'm going to hit my head against the wall for a bit.

Help! Odin not seeing phone!?

Ive got my phone into a boot loop state because I messed up when trying to restore a previous backup of CM7 that I had.
Okay I thought, this is not a problem I will just do a clean flash of something via odin with my phone in download mode. This is where the problem lays. Odin can not see my phone when its in download mode and plugged in via USB! I have flash roms via Odin before so know what I'm doing.
I've tried it on 2 windows 7 64bit laptops and different USB ports but both are the same! could this be a driver issue? I have Kies installed on both and have manually tried installing the driver too.
Other things to note is that I can't get into recovery mode but no problem getting into download. Also when I plug the phone into charge it doesnt come up with the battery symbol but only the circle of rectangles like it is loading the battery symbol which never appears.
Anyone know what is going on?

Sorry for bad english.
I had problem like yours - pc don't recognized my phone (odin too) and shows only battery charge. i tried on 3 different pc's, installed kies, pc studio, drv, tried 2 differnt cables.
And the problem was... Cables
Sent from my GT-I9000 using XDA App

Deck6rd said:
Ive got my phone into a boot loop state because I messed up when trying to restore a previous backup of CM7 that I had.
Okay I thought, this is not a problem I will just do a clean flash of something via odin with my phone in download mode. This is where the problem lays. Odin can not see my phone when its in download mode and plugged in via USB! I have flash roms via Odin before so know what I'm doing.
I've tried it on 2 windows 7 64bit laptops and different USB ports but both are the same! could this be a driver issue? I have Kies installed on both and have manually tried installing the driver too.
Other things to note is that I can't get into recovery mode but no problem getting into download. Also when I plug the phone into charge it doesnt come up with the battery symbol but only the circle of rectangles like it is loading the battery symbol which never appears.
Anyone know what is going on?
Click to expand...
Click to collapse
If you are CM7, you may need Nexus S Drivers.
See this link
http://forum.xda-developers.com/showthread.php?t=1061946&page=879
Download and extract to folder.
When phone connected, locate it in your computers devive manager and update driver and point to your folder where you extracted for installation.

Thanks spaikas!
I guess I will have to go out and buy a new cable to try that. One thing though is that even when I plug it into the mains power adaptor I still get the circle of rectangles as well as when its plugged into my PC (with the supposedly defective cable). So does this suggest that the circle of rectangles is not caused by a bad cable? but still my cable being bad could be a culprit for odin not seeing it.

chablo12 said:
If you are CM7, you may need Nexus S Drivers.
See this link
http://forum.xda-developers.com/showthread.php?t=1061946&page=879
Download and extract to folder.
When phone connected, locate it in your computers devive manager and update driver and point to your folder where you extracted for installation.
Click to expand...
Click to collapse
Thanks. I have downloaded and extracted the driver. But I can't find my phone in device manager. Does the phone have to be in download mode for windows to be able to see it. Do you know roughly what it would be called?

Deck6rd said:
Thanks. I have downloaded and extracted the driver. But I can't find my phone in device manager. Does the phone have to be in download mode for windows to be able to see it. Do you know roughly what it would be called?
Click to expand...
Click to collapse
No, actually enable USB debugging and go into CWM recovery and connect, mine was showing as Samsung Galalxy S or Android phone. Check in USB devices as well.

chablo12 said:
No, actually enable USB debugging and go into CWM recovery and connect, mine was showing as Samsung Galalxy S or Android phone. Check in USB devices as well.
Click to expand...
Click to collapse
I can't get into CWM! Is there no way to install the Nexus S driver without having the phone plugged in because otherwise I have no idea what I'm going to do....

It was my cable! Sorry for wasting your time guys but it was just a very unlucky coincidence that my cable must of broke at the same time that I messed up my phone and needed to do a odin flash! Anyway managed to get my hands on another cable and now odin can see my phone!

) congratulations!
i was so happy too, when i pluged 3rd cable, and found it good
Sent from my GT-I9000 using XDA App

Q: Comp not recognizing hard bricked in download mode

My phone was hardbricked when i screwed up with the latest Serendipity install. It boot loops at the white AT&T world phone screen. I am unable to get it into download mode with out a jig. However, once i do have it in download mode, my computer will not recognize the phone. It keeps viewing it as an unknown device.
I dont know if this is related to it not showing up using Odin 3 one click downloader. Either way, i need to get it back to stock.
I have the drivers already, in fact ive reinstalled them once or twice trying to get this to work, any ideas?

That's not a hard brick. Search the already existing threads in the forums, of which there are many. No need to start another thread on it. Try a different USB port on your PC, make sure you're running Odin as an administrator before you put the phone in download mode and plug it into your PC.
Sent from my GT-I9000 using Tapatalk

Rhiannon224 said:
That's not a hard brick. Search the already existing threads in the forums, of which there are many. No need to start another thread on it. Try a different USB port on your PC, make sure you're running Odin as an administrator before you put the phone in download mode and plug it into your PC.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
sorry for not searching.
as for my problem. ive tried multiple ports and im running odin in admin mode. still no luck

icanhearpudding said:
sorry for not searching.
as for my problem. ive tried multiple ports and im running odin in admin mode. still no luck
Click to expand...
Click to collapse
Have you tried installing drivers and then reinstalling drivers manually from designgears thread in dev?
SIGNATURE : Life is like a box of captivates, you never know if your gps will work

so im pretty much able to get it into download mode any time i want. but i cannot get my computer to view it. No matter what USB port i use, it still says unknown/unrecognized device. I see you mentioned something about manually installing drivers, how would i do that?

Try a different PC. Although, it sounds like a driver issue. What version of windows are you on?
sent from my Gingerbread Cappy using Tapatalk from somewhere on AT&T's ****ty network.

I know others have had issues with i9000 ROMS not being recognized once their phone goes in download mode. Here is a whole thread about it.

yeah i checked through that whole thread, it wasnt any help.
My comp is 32 bit windows 7. ive tried to connect my phone to a 64 bit windows 7, and a mac, and still havnt gotten ****. Im getting really frustrated. What are my options when i simply cannot find a way to get Odin to view the phone? All it says is that my USB device has malfunctioned and it wont work.
EDIT1
okay. ive discovered that if i plug in my USB while the ATandT logo is looping, my computer will see it as an external storage device. THEN i jig it into download mode, and plug it into the same port, and it will no longer see the device as unknown, but instead calls it 'androidtest,' although it still doesnt show up in Odin3. hmmmmm could this be a lead into getting it to show up? Every other attempt ive done has ended up with it just calling it unknown device
EDIT2
Searching through the device manager shows that the phone no longer shows up under universal serial bus controllers, but instead 'libusb (WinUSB) devices', under the name Androidtest. But as i said before, still no luck getting it to show up with Odin, either the one click or the choose all the components version. Any thoughts?

icanhearpudding said:
yeah i checked through that whole thread, it wasnt any help.
My comp is 32 bit windows 7. ive tried to connect my phone to a 64 bit windows 7, and a mac, and still havnt gotten ****. Im getting really frustrated. What are my options when i simply cannot find a way to get Odin to view the phone? All it says is that my USB device has malfunctioned and it wont work.
Click to expand...
Click to collapse
It really sounds like a driver issue. Have u tried downloading I9000 drivers?

prbassplayer said:
It really sounds like a driver issue. Have u tried downloading I9000 drivers?
Click to expand...
Click to collapse
ive downloaded and uninstalled and redownloaded all sorts of different captivate drivers. it always still just said 'usb device malfunctioned.' i belive at this point, i have every driver uninstalled, hoping that windows itself would grab the right one. . ..
idea: ill reinstall captivate drivers. . . then ill do the usb while atandt is booting and THEN use the same usb port for the download mode. Without drivers, this is how i got to the 'androidtest' deal. perhaps with drivers installed, it will do something different.

icanhearpudding said:
ive downloaded and uninstalled and redownloaded all sorts of different captivate drivers. it always still just said 'usb device malfunctioned.' i belive at this point, i have every driver uninstalled, hoping that windows itself would grab the right one. . ..
idea: ill reinstall captivate drivers. . . then ill do the usb while atandt is booting and THEN use the same usb port for the download mode. Without drivers, this is how i got to the 'androidtest' deal. perhaps with drivers installed, it will do something different.
Click to expand...
Click to collapse
HOOOOOOOOOOOOOOOORAY. I did it! THis worked. I had to have the captivate drivers, installed, THEN plug it in during the at and t boot loop THEN plug it in after jigging download mode. Thanks so much for your help everybody!

Captivate stuck on phone-!-computer screen, even with jig

So I was flashing a stock rom from Odin, and Odin froze, so I unplugged the phone and took out the battery. Now, when I try to get into download mode, all I get is a screen with a phone-!-computer. Even with a usb jig, it just goes to this screen. My captivate is also not recognized by the computer when I plug it in when its on the phone-!-computer screen.

cherrybombaz said:
So I was flashing a stock rom from Odin, and Odin froze, so I unplugged the phone and took out the battery. Now, when I try to get into download mode, all I get is a screen with a phone-!-computer. Even with a usb jig, it just goes to this screen. My captivate is also not recognized by the computer when I plug it in when its on the phone-!-computer screen.
Click to expand...
Click to collapse
Have you tried all the steps in the Captivate Connection Issues post (in my signature)?

Does it say something about hardware upgrade failure?

mrhaley30705 said:
Does it say something about hardware upgrade failure?
Click to expand...
Click to collapse
Nope. It just doesn't show up at all; not even in device manager and it just shows the phone exclamation computer screen.

jmtheiss said:
Have you tried all the steps in the Captivate Connection Issues post (in my signature)?
Click to expand...
Click to collapse
Yea more or less. The weird thing is it was detected before and odin was able to start the flash. But it hung after it said do not disconnect the device so I was forced to unplug it. Now I just don't see anything at all.

cherrybombaz said:
Yea more or less. The weird thing is it was detected before and odin was able to start the flash. But it hung after it said do not disconnect the device so I was forced to unplug it. Now I just don't see anything at all.
Click to expand...
Click to collapse
Have you given Heimdall a try? It sometimes works when Odin won't.

jmtheiss said:
Have you given Heimdall a try? It sometimes works when Odin won't.
Click to expand...
Click to collapse
Yep. When I try to install the heimdall driver, the phone doesn't even show up so it won't install.

cherrybombaz said:
Yep. When I try to install the heimdall driver, the phone doesn't even show up so it won't install.
Click to expand...
Click to collapse
Odd. I'm assuming you've done all the uninstalling drivers, rebooting, etc, etc?

jmtheiss said:
Odd. I'm assuming you've done all the uninstalling drivers, rebooting, etc, etc?
Click to expand...
Click to collapse
Yea I tried uninstalling and reinstalling the Odin drivers. How do I uninstall the heimdall driver?

Driver Uninstallation Instructions:
1. Put your Samsung Galaxy S Captivate (i897) into download mode by holding Volume Down + Volume Up and...
2. Plug your phone into your PC.
3. Open up Device Manager on your PC.
4. Under "Libusb (WinUSB) devices" right click on "Samsung USB Composite Device" and choose Properties.
5. Go to the Driver tab and select Uninstall.
Done

4-2ndtwin said:
Driver Uninstallation Instructions:
1. Put your Samsung Galaxy S Captivate (i897) into download mode by holding Volume Down + Volume Up and...
2. Plug your phone into your PC.
3. Open up Device Manager on your PC (Control Panel -> System -> Device Manager).
4. Under "Libusb (WinUSB) devices" right click on "Samsung USB Composite Device" and chose Properties.
5. Go to the Driver tab and select Update Driver.
6. Chose to browse your computer for the driver.
7. Chose to pick from a list of devices drivers on your computer.
8. Pick the original Samsung Composite driver, press next and then follow the prompts.
9. Done
Click to expand...
Click to collapse
The problem is I don't see my phone in device manager.

Edited my previous post. Gave u the update instead of the uninstall method, oops.

4-2ndtwin said:
Edited my previous post. Gave u the update instead of the uninstall method, oops.
Click to expand...
Click to collapse
But I don't see the Libusb tab in device manager when I plug my phone in.

When u initially installed the drivers for Heimdall, they only installed to the usb port that u were connected to. So u need to be plugged into that specific port and then u should see it in the Device Manager.
And u really don't need to uninstall the drivers that u need for Heimdall, as long as u installed them after u installed the drivers from Kies. See this post... http://forum.xda-developers.com/showpost.php?p=19998299&postcount=115
And if u have tried everything in the Stickied thread--Captivate Connection Issues and Download Mode Help to no avail, then ??

4-2ndtwin said:
When u initially installed the drivers for Heimdall, they only installed to the usb port that u were connected to. So u need to be plugged into that specific port and then u should see it in the Device Manager.
And u really don't need to uninstall the drivers that u need for Heimdall, as long as u installed them after u installed the drivers from Kies. See this post... http://forum.xda-developers.com/showpost.php?p=19998299&postcount=115
And if u have tried everything in the Stickied thread--Captivate Connection Issues and Download Mode Help to no avail, then ??
Click to expand...
Click to collapse
Yep I made a jig and it works but it doesn't go to the downloading screen with the shovel instead it just goes to the screen with the phone exclamation computer.

Then try this...may sound odd but anyway--just pull ur battery and leave it out for 5 minutes or so and then put it back in and try getting back into download mode and see what happens.
Btw, which stock odin were u trying that got u in this mess ?

4-2ndtwin said:
Then try this...may sound odd but anyway--just pull ur battery and leave it out for 5 minutes or so and then put it back in and try getting back into download mode and see what happens.
Btw, which stock odin were u trying that got u in this mess ?
Click to expand...
Click to collapse
The odin3 one click downloader. Yep I tried taking out the battery -- no go :/.

happened to my cappy yesterday. went through 7 hours to fix mine. had the same issue as yours. no download mode showing with any combo I try even recovery had 4 micro usb cables and still my pc is choosy. that screen is actually download mode. you just need the proper drivers for the pc to read it. I used the one from heimdall. tried for atleast 100x before my pc recognizes my cappy as gadget serial and then boom! after installing,uninstalling and reinstalling all is A-ok now. just try it and have faith on your cappy

gonemad02 said:
happened to my cappy yesterday. went through 7 hours to fix mine. had the same issue as yours. no download mode showing with any combo I try even recovery had 4 micro usb cables and still my pc is choosy. that screen is actually download mode. you just need the proper drivers for the pc to read it. I used the one from heimdall. tried for atleast 100x before my pc recognizes my cappy as gadget serial and then boom! after installing,uninstalling and reinstalling all is A-ok now. just try it and have faith on your cappy
Click to expand...
Click to collapse
What did you try before it was recognized? Did you just plug and replug the usb into the computer until it worked?

Mine did this before, when I accidently forgot to convert back to RFS before flashing back to stock, and I thought I was totally screwed. After this screen comes up the first time it will not go away, even if a download jig is used, until you get a good flash.
Try this:
Open your Odin, and have it ready with whatever you were trying to flash to begin with. Pull the battery on your phone, put your download jig in, and now put your battery in. It will still be the error screen that comes up. Pull your jig, and now plug your phone in. It should show on Odin now, and this flash should take correctly.
---------- Post added at 01:53 AM ---------- Previous post was at 01:50 AM ----------
Also make sure the USB port you are using is a direct link to your board. I always use one of the original USB 2 ports on the back of my computer. Not using a USB hub either, but straight from the port to your phone.

[Q]Samsung captivate I897 pc connection problem model 1007

i tried everything that suggest on thread http://forum.xda-developers.com/showthread.php?t=1953930
But my PC still not detecting the phone, i am able to get to download mode but pc just wont detect it T_T. i already tried 3 different pc and 2 different cable......
Anyone have any suggestion?

gamfunny said:
i tried everything that suggest on thread http://forum.xda-developers.com/showthread.php?t=1953930
But my PC still not detecting the phone, i am able to get to download mode but pc just wont detect it T_T. i already tried 3 different pc and 2 different cable......
Anyone have any suggestion?
Click to expand...
Click to collapse
Sounds like your usb port is broken.

BWolf56 said:
Sounds like your usb port is broken.
Click to expand...
Click to collapse
but it will still charge the phone if i plug in the usb port

Use original Samsung USB cable. Charging and data pins are different.
Cheap USB cables will only charge the phone, but you'll have no data connection.

Val D. said:
Use original Samsung USB cable. Charging and data pins are different.
Cheap USB cables will only charge the phone, but you'll have no data connection.
Click to expand...
Click to collapse
:crying: i am using the original samsuung USB cable:crying:

Do you have the right drivers? Have you tried uninstalling and reinstalling them?
I suggest you go throwing the connections thread all over again.
Sent from my SGH-I747 using xda app-developers app

gamfunny said:
:crying: i am using the original samsuung USB cable:crying:
Click to expand...
Click to collapse
When you connect the phone to the computer do you hear Windows specific USB device connection sound? If you do, then the computer sees something connected, but doesn't recognize the device. As BWolf56 said, check again your drivers. If there is no reaction when you connect the phone to the PC, then it's either the cable or phone's micro USB port. Also, try different USB ports on the computer. Use the ones to the back on desktop computers, not on the front panel. Good luck!

Val D. said:
When you connect the phone to the computer do you hear Windows specific USB device connection sound? If you do, then the computer sees something connected, but doesn't recognize the device. As BWolf56 said, check again your drivers. If there is no reaction when you connect the phone to the PC, then it's either the cable or phone's micro USB port. Also, try different USB ports on the computer. Use the ones to the back on desktop computers, not on the front panel. Good luck!
Click to expand...
Click to collapse
Sound may not appear. Just have to try with another cable and computer

Val D. said:
When you connect the phone to the computer do you hear Windows specific USB device connection sound? If you do, then the computer sees something connected, but doesn't recognize the device. As BWolf56 said, check again your drivers. If there is no reaction when you connect the phone to the PC, then it's either the cable or phone's micro USB port. Also, try different USB ports on the computer. Use the ones to the back on desktop computers, not on the front panel. Good luck!
Click to expand...
Click to collapse
ZidanCo said:
Sound may not appear. Just have to try with another cable and computer
Click to expand...
Click to collapse
Tried usb port in the back and different cable, still not detecting in the download mode

gamfunny said:
Tried usb port in the back and different cable, still not detecting in the download mode
Click to expand...
Click to collapse
Does it detects it when it's simply powered on?
I think you don't have the drivers (or right drivers).

BWolf56 said:
Does it detects it when it's simply powered on?
I think you don't have the drivers (or right drivers).
Click to expand...
Click to collapse
my phone is stuck in AT&T logo when I power one

gamfunny said:
my phone is stuck in AT&T logo when I power one
Click to expand...
Click to collapse
You haven't confirmed your drivers. Do you have the right ones?

BWolf56 said:
You haven't confirmed your drivers. Do you have the right ones?
Click to expand...
Click to collapse
I download my drivers from this thread http://forum.xda-developers.com/showthread.php?t=1953930

gamfunny said:
I download my drivers from this thread http://forum.xda-developers.com/showthread.php?t=1953930
Click to expand...
Click to collapse
Try directly from the samsung website. I'm not sure what else it could be.
Sent from my SGH-I747 using xda app-developers app

BWolf56 said:
Try directly from the samsung website. I'm not sure what else it could be.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
The tread has the link from the samsung website and I download it from there....
What happen is before i have cayagenmod 10 and i want to wipe it clean and re-flash it with official rom. So i went to CMW and delete everything there, so maybe i detele something that i not suppose to and get me this situation??

gamfunny said:
The tread has the link from the samsung website and I download it from there....
What happen is before i have cayagenmod 10 and i want to wipe it clean and re-flash it with official rom. So i went to CMW and delete everything there, so maybe i detele something that i not suppose to and get me this situation??
Click to expand...
Click to collapse
I highly doubt it. CWM wouldn't delete something that hurt itself.
Last thing I can think of is checking your usb port's and cable's data pins, perhaps they're damaged.

gamfunny,
U could also try one of my Heimdall One Clicks. See here... http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Heimdall uses different usb drivers. There is a Read Me file included in the downloads, with full instructions. I would suggest u have a Jig (u can make or buy one easily) just in case u need a way to get into download mode and the button combo won't work.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

BWolf56 said:
I highly doubt it. CWM wouldn't delete something that hurt itself.
Last thing I can think of is checking your usb port's and cable's data pins, perhaps they're damaged.
Click to expand...
Click to collapse
If it damage then it won't charge right? but mine can still charge.....
4-2ndtwin said:
gamfunny,
U could also try one of my Heimdall One Clicks. See here... http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Heimdall uses different usb drivers. There is a Read Me file included in the downloads, with full instructions. I would suggest u have a Jig (u can make or buy one easily) just in case u need a way to get into download mode and the button combo won't work.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
tried Heimdall and it doesn't detect my phone either , I can get to download mode without a Jig
Any other suggestion? I really want to save my cappy

gamfunny said:
If it damage then it won't charge right? but mine can still charge.....
tried Heimdall and it doesn't detect my phone either , I can get to download mode without a Jig
Any other suggestion? I really want to save my cappy
Click to expand...
Click to collapse
Actually, the data pins are different than the ones for charging. But it's a shot in the dark since everything else doesn't seem to be working.
Sent from my SGH-I747 using xda app-developers app

BWolf56 said:
Actually, the data pins are different than the ones for charging. But it's a shot in the dark since everything else doesn't seem to be working.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
do you know which pin is the data one? i want to try and see if i can clean them