Database Develop

[ROM] fyodor FroYo AOSP Tattoo v0.7.2c (Optimized ADWLauncher for QVGA)

CURRENT DEV STATUS:
Project Terminated @ Nov 2010. Please redirect to this new ROM release thread.
Hello, guys!
I have created a personal ROM to optimize the Tattoo's performance, and flashed it successfully into my Tattoo. This ROM, fully based on AOSP, has several features here:
fully compiled from AOSP-FroYo, _TONS_ of issues hacked.
lots of kernel tweaks, deadline I/O scheduler and SLOB allocator by default.
all APKs optimized with OptiPNG and zipalign.
compcache compiled as module, enabled by default.
moving /data/dalvik-cache to /cache partition, app2sd no longer needed.
If you want to flash this ROM, do as following:
flash recovery-RA image first and reboot to recovery.
[optional]backup any files as you need via recovery.
download the package, and check out its md5sum.
adb push _zip_file_name_ to /sdcard, rename it to update.zip. (you can also copy it to /sdcard through various means as you like)
flash your tattoo, and reboot. Enjoy!
Credits: bool_s(m7 program and tattoo-hack.ko module), mainfram3, Coburn64, moneytoo(patch for market), Amon_RA(recovery image) and other active people in this community.
NOTEs:
Version x.y.z patch will only be applied to Version x.y fyodorROM. For example, v0.3.1 patch is just for v0.3 fyodorROM, you CANNOT apply it to stock ROM or other custom ones.
[v0.5.3.1 ONLY]If you really love the Sense UI, here is an highly OPTIMIZED package I build. Just apply this patch as flashing update.zip. (Please check md5sum: f803054d8232b0690741afa93fcb2356)
FAQ:
Input Method for local lang prediction. (HTC_IME only)
Please check here and here. Thanks to vilec and NForce25.
Froyo can't recognise my sdcard. (complains Blank sdcard or something else)
Froyo doesn't need ext2/3 partition to install apps on sdcard. Format it as a single vfat partition. Don't forget to backup.
Froyo official apps2sd.
Please check here and here. Thanks to NeXTWay and crazyworlds.
google apps missing
Because the google apps are always the same, I'll exclude them in my future ROMs(v0.7.2c and later). You can go to mirror.kanged site to get the latest gapps. Or just flash the gapps package from spartm. No duplicated work.
Enable JIT
pull /system/build.prop and change "dalvik.vm.execution-mode=int:fast" to "dalvik.vm.execution-mode=int:jit", then push it back and reboot.
WARNING:
COMPCACHE module is in its experimental stage, use it at you own risk.
don't forget to backup before flashing.
SNAPSHOT:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Known Issues:
FM/Camera not working. (Please DON'T try to start Camera app, which will lead to battery drain.)
v0.7.2c Changelog:
new kernel with camera debug enabled for devs. (hope it helps to fix the camera issue)
sapphire camera interfaces ported into this new kernel. (mt9t013 driver with AF disabled)
delete google apps. (any mdpi-gapps packages for Froyo would work. see FAQ)
compile the Phone app hacked by cytown, replace the stock one with it.
make VoiceRecorder visible to user.
fix the LatinIME can't predict, six lang included.
tweaks on framework and Launcher2 to improve user experience.
tweaks to save more battery. (2-3 days without gapps)
disable JIT by default since a bit unstable on arm5vt-compatible devices.
fyodor-froyo-tattoo_v0.7.2c.zip LINK: UploadMirrors MegaUpload
fyodor-froyo-tattoo_v0.7.2c.zip md5: 95de7b1f08f00254144fd5754c354321
v0.6.4.2 Changelog: (re-uploaded, apps2sd fixed. No wipe needed if you flashed my v0.6 series of ROMs before.)
kernel: apply 'memory barriers, cache flush, TLB invalidation' patch.
port the optimized bionic libraries from cyanogen git repo, and compile full source tree with them. (bullet speed)
headset's icon now shows up at the StatusBar while headset plugged in.
revert Contacts and Phone apps to AOSP version, but the Eclair like UI kept back. (hope to fix the incoming call lag issue)
build busybox dynamically to reduce the image size.
fix Phone app force close at the first boot time.
fix Music app unable to scan FLAC audio type file.
fix the Landscape layout of Music app.
fix TE can't execute commands when carriage return key pressed and fix TE number input issue. (thanks to cyanogen)
isolate Terminal Emulator from dev tools as a single app.
add 'crond_enabled' option into /etc/superd.conf, disable crond daemon by default.
replace the brut Maps version with google stock one. (fewer bugs)
fyodor-aosp-tattoo_v0.6.4.2.zip LINK: RapidShare
fyodor-aosp-tattoo_v0.6.4.2.zip md5: d63e0bfa537efaced70438aeb4031c6a
v0.5.3.1 Changelog: (New complete ROM, not patch. Remember to backup all your files)
fix renicer script. (Thanks to alexsunmiu)
fix eclair icons for Album and Clock.
convert updater-script format to recovery-RA update-script format.
disable dropbear by default. (Now you should change 'dropbear_enabled' and 'compcache_enabled' options in superd.conf, with which compcache.conf was replaced)
delete user-space APKs, only astro and maps5 reserved.
change the default wallpaper.
other minor bugs I forgot fixed.
fyodor-TattooROM_v0.5.3.1.zip LINK: http://rapidshare.com/files/381185296/fyodor-TattooROM_v0.5.3.1.zip
fyodor-TattooROM_v0.5.3.1.zip md5: fddf3dc1dc192708ba337f42cfd7d991

Sounds good m8y, well done.

Good job.
thanks

why "save system partition space" ?
what's this for ?
/system/app symlinked to /data/app_s
/system/framework symlinked to /data/framework_s

i do 4 steps, but i dont know how to do 5. step : "flash your tattoo through update.zip." plz help

I searched a lot to find it too. You must reboot to recovery mode(holding home button) and then when the recovery android image appears must quick press and release home+back+red buttons(this is a little tricky) to appear the recovery mode menu with the option to flash the update image.

suoko said:
what's this for ?
/system/app symlinked to /data/app_s
/system/framework symlinked to /data/framework_s
Click to expand...
Click to collapse
Actually, saving system partition cann't enhance the performance, I have deleted that stmt.(symlink) in updater-script, and restored the app/framework to /system partition. Thank you!
Update to v0.1 plz.
btw, it's not necessary to press "HOME+BACK+END" at the same time to enter the recovery menu UI, just hold HOME button and then press END, you will get it.

update to v0.2
I have updated my personal ROM(fyodor ROM) to v0.2. If you meet any problem after flashing the ROM or if you have any suggestion, please let me know. Thank you!
v0.2 Changelog:
* restore SenseUI.
* add nano text editor.
* add terminfo for nano UI displayed properly.
* add scp command.
* busybox symlinked to /system/xbin/* (200+ command linked).
* replace default wifi config file: tiwlan.ini. (keep connecting with sharp speed, disable powersave mode by default)
* auto-install tattoo-hack.ko module.
* patch the market program to display all apps.
* formatting /data partition has been canceled in updater-script. (but wiping /data partition in recovery mode is strongly recommended)

The Recovery image that you have attached is the TCRI? or another recovery image?

Mikhael_ said:
The Recovery image that you have attached is the TCRI? or another recovery image?
Click to expand...
Click to collapse
It's based on TCRI, scripts(backup.sh and restore.sh) were written totally. I think this point has been mentioned in my first post.

hi fyodor, i would like to congratulate you for your wonderful work.
i have one doubdt, how do i flash recovery image first ???? it was mentioned in ur to do list before anyone flashes his tattoo using ur ROM.
i really dont know how i do it, but somehow i could get the root status on my tattoo, please explain to me step by step on how to flash recovery image ...

look at the forums and you will see just like the rest of us did how to do it
keep questions to rom related and we should all be ok

Omg. It's fast!!!
Thanks a lot Any chance we can get the Sense widgets back?

Yes. Fast rom. I need htc sense widgets too.

are sense widgets ...
... just apk packages we can download somewhere and install by ourselves?

where to download? i can't find.

Which recovery is better?
Original mainfram3's TCRIalpha or yours?

i am getting this error, i dont know where i am getting it wrong....
in recovery mode, when i apply sdcard:update.zip
it says;
verifying update package....
E:No signature (806 files)
E: Verification Failed
Installation aborted.
why is this error ??? what should i do now ???

中文一顶！
再次路过~~~

alexsunmiu said:
中文一顶！
再次路过~~~
Click to expand...
Click to collapse
What? This is an english forum. Please respect forum rules.

[EXT3] HoneyDroid V2 [20/2/12]

Hey guys, I proudly present to you all my 4th themed Android ROM, namely HoneyDroid. This time I theme the ROM to Honeycomb-like style.
This ROM was very similiar with Needo's Honeycomb Froyo but with different base used, and most important part was this ROM is the FIRST EVER OFFICIAL EXT3 ROM been made
*Features:
- EXT3 system (Fast like Hell)
- FULL Arabic support
- Honeycomb lock screen
- Fast + Stable + Beauty
- Wifi Tether apps included
- 99% Honeycomb icons and style
- Honeycomb style clock, originally in clock widget
- All other features that have in SenseDroid
* For Your Information:
- Honeycomb theme for Go Launcher had included in the build to improve your experience to this ROM
- You can download Honeycomb style buttons from attached file on post 2 below to make your home screen more looks like Honeycomb
- You can download Wifi Tether app from attached file on post 2 below
- I will including two different version starting from V2 which was using EXT2 or EXT3 system
-Wifi Tether:
1. Install and launch Wifi-Tether
2. Go to "Settings".
3. Then go to "Change Device-Profile" and choose HTC Desire (GSM) and start tethering.
4. Without stop tethering go again to "Settings> Change Device-Profile> and choose HTC Dream.
5. Now stop tethering and start again.
Click to expand...
Click to collapse
- Market Problem (' Apps not compatible'):
- Go to Settings > Applications > Manage applications > All > Market > 'Clear Data' and then 'Uninstall updates'
- To disable Market Updater so that the Market will not updating itself to the latest version (buggy version):
---> Download Terminal Emulator in the Market
---> Type the following command in the terminal emulator:
---> su *PRESS ENTER*
---> pm disable com.android.vending.updater *PRESS ENTER AGAIN*
Click to expand...
Click to collapse
- Hardware key doesnt light up:
---> Go to brightness control, select other brightness value, then the light will turn on
Click to expand...
Click to collapse
- 3G function for some users:
---> Go to Settings > wireless networks > mobile network > APN
---> If there is nothing in APN then you have to set your own APN---> Press 'Menu' button then add new.
Click to expand...
Click to collapse
*Important:
- First time boot into Android, go to 'Settings > Wireless and Network > Mobile Networks > uncheck 'Data Enabled'. VERY IMPORTANT
- DO NOT install GAPPS directly after finish installing the build or else you will get a serious problem
- NEVER try to sync your phone with Google before installing GAPPS or else you will get serious problem
- Wifi have to switch on before booting Android or else you will get error message
- Silent the phone before booting Android so that you will have sound in Android
- Charge your phone before booting Android so that you can charge your phone in Android
- Go to Setting > Location & Security > Check 'Use wireless networks' so that you can use your GPS
- Choose Ripple Lock to integrate with Go Launcher, after that Start Ripple Lock
*Installing Instructions:
1. Format SDcard To 4 Partitions :
- 1st partition: FAT32 (SDcard / Rest)
- 2nd partition: EXT3 (System / about 150 MB )
- 3rd partition: EXT3 (Data / about 250 MB)
- 4th partition: EXT3 (Cache / about 100 MB)
* Make sure all partitions are set to PRIMARY
* If you are using HoneyDroid EXT2 version then format the three partitions as EXT2
2. Extract the Package then copy [npkboot] folder to root of SDcard
3. Copy [HoneyDroid V2.zip] to root of SDcard without extraction
4. Run Haret and wait until the screen show 'Press Volume Down shortly To Launch ClockworkMod Recovery', press Volume Down button
5. While In Recovery menu, choose " install zip from SD card >> choose zip from sdcard >> select 'HoneyDroid V2.zip'
6. After finish installing the build, return to main menu >> Reboot phone
7. Run Haret, this time let the phone boot into Android completely. After that, reboot your phone
8. Run Haret, go into CWM Recovery, choose " install zip from SD card >> choose zip from sdcard >> select 'HoneyDroid GAPPS.zip'
9. After finish install, reboot phone
10. Run HARET and leave it to continue booting into Android, you are done
*Huge Thanks to:
- Needo
- Neopeek
- XDAndroid
- Midnight aka Helicopter88
- Myself
*WHAT CAN YOU DO IF YOU APPRECIATE MY WORK:
- CLICK the Thanks Button
- RATE THIS BUILD
- BUY ME A COFFEE
DOWNLOAD HoneyDroid V2 (EXT3) HERE
DOWNLOAD HoneyDroid V2 (EXT3) FROM FTP SERVER
DOWNLOAD HoneyDroid GAPPS
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

DOWNLOAD HoneyDroid GAPPS WITH NEW MARKET HERE >> View attachment 805984
DOWNLOAD HoneyDroid GAPPS WITH OLD MARKET HERE >> View attachment 805986
Download Honeycomb style buttons + Wifi Tether.apk HERE >> View attachment 807052
Change log and Update:
6/12/11
HoneyDroid V2:
1. Providing two different system format (EXT2 or EXT3)
2. Updated Go Launcher EX
3. Added Honeycomb theme
4. Updated SU
5. NEW Honeycomb style clock, originally in clock widget
6. FULL Arabic support
7. Using Midnight's latest kernel with better battery drain control
15/11/11
HoneyDroid V1 Released

kernel?
what kernel is in the package??

ady_95 said:
what kernel is in the package??
Click to expand...
Click to collapse
My kernel,xdadnroid based,gpu overclocked,axi&ahb overclocked and ext3 support..

sorry for another question, but does it have the same problems with the batt-meter as XDAndroid kernel??
EDIT: and if has it, is there any way to solve it??

ady_95 said:
sorry for another question, but does it have the same problems with the batt-meter as XDAndroid kernel??
EDIT: and if has it, is there any way to solve it??
Click to expand...
Click to collapse
It's xdandroid based,so yes,it has the same problems
To solve i would need to mess with battery files,but I would probably break compatibility with other phones..

helicopter88 said:
It's xdandroid based,so yes,it has the same problems
To solve i would need to mess with battery files,but I would probably break compatibility with other phones..
Click to expand...
Click to collapse
How about making a custom kernel for our X1?

OMG ! Nothing to say.
Is so so so SPEED.
Ty jerry

jerrytan93 said:
How about making a custom kernel for our X1?
Click to expand...
Click to collapse
Could be doable,but I don't have a lot of kernel developement and C knowledge,could take a while,and for a while i mean,a lot..

I only get to the Line:
init: Unable to open persistent property directory /data/property errno: 2
but i'm pretty sure, that I set up the file system structure correct... any ideas?

Kid_DC said:
I only get to the Line:
init: Unable to open persistent property directory /data/property errno: 2
but i'm pretty sure, that I set up the file system structure correct... any ideas?
Click to expand...
Click to collapse
You haven't installed the build.

helicopter88 said:
You haven't installed the build.
Click to expand...
Click to collapse
thank you ^^ actually i didn't noticed the moment when i had to press the volume-down button... thought there would be some kind of delay... also text size on xperia is sooo tiny ^^ but managed it now... so problem solved
Edit: Already another one... trying to flash the GAPPS.zip, it responds: can't find keys (or Cant Open /sdcard/GAPPS.zip (bad))
already downloaded it again and copied several times to the phone to check the size... but the phone won't let me flash the Gapps...
anyone?

This build should be fast, right?
So far a great build!!! BUT.
My quadrant score was only 365. It seems a bit low. I tried to use the app setcpu but it crashed consequently. In the Sensedroid v.9. there were no problems at all setting the max. speed. How can this be solved?

Hello jerrytan,
all your versions of Android is the best, but I have the same problem with all ...
by incoming calls will not hear anything ....
you have any solution?
thanks...

rhmjmango said:
So far a great build!!! BUT.
My quadrant score was only 365. It seems a bit low. I tried to use the app setcpu but it crashed consequently. In the Sensedroid v.9. there were no problems at all setting the max. speed. How can this be solved?
Click to expand...
Click to collapse
Kernel related.. I think Midnight will solve this
combaluigio said:
Hello jerrytan,
all your versions of Android is the best, but I have the same problem with all ...
by incoming calls will not hear anything ....
you have any solution?
thanks...
Click to expand...
Click to collapse
use volume down to turn the speaker off and then press volume up to turn on for few times.. it will be solved.

why I can't download your new rom?

ext3 vs ext2
jerrytan93 said:
*Features:
- EXT3 system (Fast like Hell)
Click to expand...
Click to collapse
why is ext3 build way faster than ext2 build?
iirc, the difference between ext2 and ext3 is journaling, and until now i think because ext3 use journaling so ext3 slower than ext2 (but ext3 'safer' than ext2).
Can you explain this, I'm confused

jerrytan93 said:
Kernel related.. I think Midnight will solve this
Click to expand...
Click to collapse
Don't ask me why,ext3 makes benchmark crazy,Neocore was good and smooth,the result was 15 fps here...
The UI and the performance is faster,and benchmark aren't important..
sLumPia said:
why is ext3 build way faster than ext2 build?
iirc, the difference between ext2 and ext3 is journaling, and until now i think because ext3 use journaling so ext3 slower than ext2 (but ext3 'safer' than ext2).
Can you explain this, I'm confused
Click to expand...
Click to collapse
Well,even on my pc ext3 is way faster than ext2,and ext4 is faster than both.
Journaling improves performance,improves safety but on sd-card isn't the best choice since it may kill the sd before than ext2,but no one has ever reported "My SD has died"..

Installed Midnight´s kernel and yes it worked. Could Setcpu to 633 Mgh. Had no effect on the score in quadrant, still around 350.
By the way i noticed that playing music there is only mono not stereo. Any idea to fix this!?

fabulioussssss,tnx dear friend for ur new work,I should try it soon....
leo.dong said:
why I can't download your new rom?
Click to expand...
Click to collapse
Links have been checked,I see nothing wrong!!

[EXT3] MiDroid V1 [20/2/12]

Hey guys, after making 4 themed Android ROMs, this time I try to port MIUI stuff into the ROM, I call it MiDroid.
What is MIUI? MIUI features a heavily-modified user interface that does away with the Android app drawer and having a very similar iOS UI look.
MiDroid having lots of apps and stuff from MIUI rom, and I had also include some Market apps to enhance your experience with MIUI build.
Direct ported apps from MIUI:
1. Analog clock
2. Browser
3. Digital Weather Clock
4. Gallery
5. Launcher
6. Music
Market apps with MIUI style:
1. EX Dialer (Smarter contact and dialer integration)
2. Go SMS Pro (Similar interface with MIUI)
Click to expand...
Click to collapse
* Features:
- Wifi Tether
- FULL Arabic support
- Fully call function ( Call and Receive )
- Able to install any apps (Won't show you 'Not Compatible')
- MIUI launcher and other apps ported from MIUI
- Launcher having lots of themes which are downloadable from internet
*For your information:
- Youtube can only play non-HQ video
- System will be slower when first time boot into Android:
--> Open all apps, sync your phone with Google, then reboot your phone
- There are two different system format for this build (EXT2 / EXT3), choose your desire format
- Due to MIUI official ROM is based on CHINESE, so there are some apps are in Chinese language
-Wifi Tether:
1. Install and launch Wifi-Tether
2. Go to "Settings".
3. Then go to "Change Device-Profile" and choose HTC Desire (GSM) and start tethering.
4. Without stop tethering go again to "Settings> Change Device-Profile> and choose HTC Dream.
5. Now stop tethering and start again.
If Wifi Tether not working, use File Manager and go to /system/apps/choose 'Wifi_Tether' and reinstall again
Click to expand...
Click to collapse
- Market Problem (' Apps not compatible'):
- Go to Settings > Applications > Manage applications > All > Market > 'Clear Data' and then 'Uninstall updates'
- To disable Market Updater so that the Market will not updating itself to the latest version (buggy version):
---> Download Terminal Emulator in the Market
---> Type the following command in the terminal emulator:
---> su *PRESS ENTER*
---> pm disable com.android.vending.updater *PRESS ENTER AGAIN*
Click to expand...
Click to collapse
- Hardware key doesnt light up:
---> Go to brightness control, select other brightness value, then the light will turn on
Click to expand...
Click to collapse
- 3G function for some users:
---> Go to Settings > wireless networks > mobile network > APN
---> If there is nothing in APN then you have to set your own APN---> Press 'Menu' button then add new.
Click to expand...
Click to collapse
*Important:
- First time boot into Android, go to 'Settings > Wireless and Network > Mobile Networks > uncheck Data Enabled'. VERY IMPORTANT
- DO NOT install GAPPS directly after finish installing the build or else you will get a serious problem
- NEVER try to sync your phone with Google before installing GAPPS or else you will get serious problem
- Wifi have to switch on before booting Android or else you will get error message
- Silent the phone before booting Android so that you will have sound in Android
- If you cannot hear the person's voice when incoming calls, turn off the speaker and then turn on again
*Installing Instructions:
1. Format SDcard To 4 Partitions :
- 1st partition: FAT32 (SDcard / Rest)
- 2nd partition: EXT3 (System / about 150 MB )
- 3rd partition: EXT3 (Data / about 250 MB)
- 4th partition: EXT3 (Cache / about 100 MB)
* Make sure all partitions are set to PRIMARY
* If you are using EXT2 build then format the partitions as EXT2 instead
2. Extract the Package then copy [npkboot] folder to root of SDcard
3. Copy [MiDroid V1.zip] to root of SDcard without extraction
4. Run Haret and wait until the screen show 'Press Volume Down shortly To Launch ClockworkMod Recovery', press Volume Down button
5. While In Recovery menu, choose " install zip from SD card >> choose zip from sdcard >> select 'MiDroid V1.zip'
6. After finish installing the build, return to main menu >> Reboot phone
7. Run Haret, this time let the phone boot into Android completely. After that, reboot your phone
8. Run Haret, go into CWM Recovery, choose " install zip from SD card >> choose zip from sdcard >> select 'MiDroid GAPPS.zip'
9. After finish install, reboot phone
10. Run HARET and leave it to continue booting into Android, you are done
*Huge Thanks to:
- MIUI
- Needo
- Midnight
- Neopeek
- XDAndroid
- Myself
*WHAT CAN YOU DO IF YOU APPRECIATE MY WORK:
- CLICK the Thanks Button
- RATE THIS BUILD
- BUY ME A COFFEE
DOWNLOAD MiDroid V1 (EXT3) FROM HIGH SPEED FTP SERVER
DOWNLOAD MiDroid GAPPS
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Download MiDroid GAPPS with NEW Market >> View attachment 816686
Download MiDroid GAPPS with OLD Market >> View attachment 816685
Change log and Updates:
15/12/11
MiDroid V1 Released !!

Awesome, congrats...

wow,looks very good, and why the weather is beijing? but relly good for our chinese

congrats man ... keep the good work up ...

leo.dong said:
wow,looks very good, and why the weather is beijing? but relly good for our chinese
Click to expand...
Click to collapse
The weather widget is in Chinese version because it was directly pulled from MIUI ROM

I've seen that you removed the charging disclaimer in your "*Important:" section. Is this issue fixed in this ROM:
- Charge your phone before booting Android so that you can charge your phone in Android
Click to expand...
Click to collapse
And I would also please like to know if I have to do these procedures everytime I reboot the system:
- Wifi have to switch on before booting Android or else you will get error message
- Silent the phone before booting Android so that you will have sound in Android
- Charge your phone before booting Android so that you can charge your phone in Android
Click to expand...
Click to collapse
I would really be happy to hear that the charging issue is gone in this ROM.
Thank you for your great work non the less

OtoTheBear said:
I've seen that you removed the charging disclaimer in your "*Important:" section. Is this issue fixed in this ROM:
And I would also please like to know if I have to do these procedures everytime I reboot the system:
I would really be happy to hear that the charging issue is gone in this ROM.
Thank you for your great work non the less
Click to expand...
Click to collapse
Yes.. charging issue had been fixed by using Midnight's kernel..
If not mistaken WiFi issue also had fixed in midnight's kernel as well

I can't install this rom, I installed from Sd card, then run haret again and it can't start to Android, it just reset. I'm using energy 2.5 rom

jerrytan93 said:
Yes.. charging issue had been fixed by using Midnight's kernel..
If not mistaken WiFi issue also had fixed in midnight's kernel as well
Click to expand...
Click to collapse
That's great news, thank you

LOC9493 said:
I can't install this rom, I installed from Sd card, then run haret again and it can't start to Android, it just reset. I'm using energy 2.5 rom
Click to expand...
Click to collapse
This issue happened to me so many times,but it gone away now...
what kernel are u using??I think It's B coz of CPU overclocking,ur kernel may not work with all kovsky devices b coz f overclock, try to change the overclocking value in startup.txt ..
PS:I suggest u to use a lighter build like 826X,It's really fast and stable,I'm using it for more than 2 years,I know energy ROMs have so many cool apps,But if u really need a special app u can install it urself.....

Updated new link to high speed ftp server..

I have this problem with camera (attachment).
Can i fix it somehow? A kernel change?
And the Wi-Fi - i've followed the instruction, Wi-Fi was okey on MIUI,
but is it temporary (till restart) ?
Because after phone's restart there is Wi-Fi error again.
Do i have to enable Wi-Fi on Windows each time when i want to boot MIUI?
What about if MIUI was installed as primary rom, could i enable the Wi-Fi without Windows?
Anyway, thank you for the great job, system works, even sound and light near the buttons.
Aaah, almost forgot - any way to power up the ambient lights on the sides of the phone?
That is the feature i miss very much

[ROM] [2013-05-14] CM10 "Look Ma! No Hands!" Edition

Hiya !
As a result of all the r&d in Metallica's thread, i'm starting this new one to focus mainly on testing if by having cm10 run on the new bootloader, the call bug is somehow affected/resolved.
So let's do that
For whoever may want to compile the rom, all the patches and instructions are here and on the next few pages. Let's keep that thread for raw development and this one for testing
This rom is 99% pure cm material and, aside the patches i applied to make it boot on the new bootloader and some little things like PDroid... for now...
Do not, and i repeat, do not flash any official cm10 or cm10.1 release when on the new booloader. It will just fail miserably
So, here goes...
Updated howto to simplify the process by using the cwm flashable recovery
If you come from any ICS with unlocked bootloader (Topogigi, Carburano, etc...):
1) grab the recovery zip and the cm10 zip attached to this post
2) enable debug in developer options (if you haven't already of course)
3) connect the usb cable to your box
4) copy the two zips in your external sd card
5) reboot to recovery by holding power and volume down
5) wipe data/cache, then go to mounts and format system (just to be safe)
6) flash the recovery zip file you previously slapped in the external sd card
7) reboot recovery from the advanced menu
8) flash the cm10 zip as usual
If you come from a GB Bootloader (cm7/9/10 - stock gb):
1) get the AIO Toolkit and read the instructions on that thread !!!
2) in the AIO toolkit select to flash my recovery
3) download the latest cm10 zip attached to this post
4) copy the zip to your external sd card
5) boot to recovery holding down POWER and VOL- together
6) flash the cm10 zip as usual
If you update from a previous version of this rom
1) download the new version to your external (or internal) sdcard
2) reboot to recovery
3) wipe cache/dalvik (no data wiping necessary at all)
4) flash the rom
5) reboot and enjoy
A nandroid backup of your previous rom is vigorously suggested
A big thanks to RC and the CM team for cm10 and cm10.1 is mandatory
Special thanks go to Tonyp, Metallica, Harsh, Wkpark, Imperticus, and all the people (surely i forgot someone, don't hate me) that spent time and effort in brainstorming to make this possible in the r&d thread
Second post: kernel, addons and experimental mods
Third post: recovery and rom changelogs
CM10 Downloads
2013-05-14 -> cm-10-20130514-UNOFFICIAL-p990 (Look Ma! No Hands!)
2013-02-08 -> cm-10-20130208-UNOFFICIAL-p990 (Here Come The Drums)
2013-01-06 -> cm-10-20130106-UNOFFICIAL-p990 (Lights Fest)
2012-12-28 -> cm-10-20121228-UNOFFICIAL-p990 (Penguins Galore)
2012-12-26 -> cm-10-20121226-UNOFFICIAL-p990 (After Christmas)
2012-12-24 -> cm-10-20121224-UNOFFICIAL-p990 (Merry Christmas)
2012-12-20 -> cm-10-20121220-UNOFFICIAL-p990 (Initial Release)
Touch Recovery 6.0.2.5
Get it from this post and read the changelog there. Thanks to Tonyp.
-

Pengus Kernel
Development of this kernel has been discontinued and resumed as Kowalski Kernel in this thread !​
Change Log
Code:
2013/01/13
- Fixed wifi issues when tethering
- Reverted a patch related to sdcard access
- Set default i/o readahead to 256 kbytes
- Added a temp wake / unwake lock to suspend/resume for bcm4329
- Revert to 32M of carveout reduction
- Force wifi pm_fast mode when screen on
- Revert to 07/01 values for kernel flags
2013/01/11
- Disabled auto hotplug during screen-on operations
* Both CPUs will be always active
- Enabled auto hotplug only during suspend
* On screen off the 2nd core will go to sleep
- Small changes in the kernel cflags
2013-01-10
- Fixed auto_hotplug code that was causing freezes
- Fixed the auto_hotplug parameters for good
- Configuration optimizations (lots of them)
- Fixed a couple bugs in the wifi pm system
- Set default i/o readahead to 1024 kbytes
- Implemented Proportional Rate Reduction for TCP
- Applied a few patches to speedup access to the sd
- Modified cflags to speedup the fpu a bit
2013-01-07
- Fixed notification lights... again.
* They work perfectly when selecting "always on" mode.
* Blinking requires some more love in the kernel. Works perfectly when on charger.
- Fixed wifi power consumption when in active use.
2013-01-06
- Carveout reduced to 120M. 32M more ram for free.
- Fixed notification lights. They blink correctly now.
- Fixed wifi:
* Will keep the connection in background and allow the phone to enter deep sleep.
* Preconfigured to use PM_FAST in suspend and PM_OFF during normal operation.
* Added sysfs interface for wifi power management (/sys/modules/wireless/parameters/max_pm).
* "echo 1 > /sys/modules/wireless/parameters/max_pm" will enable PM_MAX suspend mode.
- Fixed bluetooth:
* Allows the phone to enter deep sleep without disconnecting the clients.
* Headset commands will not work when the phone is in deep sleep.
* Just turn on the screen and they will work fine until there is rf traffic (music, voice, etc).
* Added 60 seconds grace time before deep sleep kicks in.
- Backported ROW I/O scheduler from Qualcomm (from kernel 3.2). Set as default.
- Backported Dynamic Interactive governor (from kernel 3.2). Set as default.
- Backported Auto Hotplug (from kernel 3.4) and removed Tegra Hotplug.
* Kernel will disable the second core when not needed.
* Second core is always off when in sleep mode.
- Backported multiple SMP patches (from kernel 3.4).
- Updated Interactive governor with patches from the Aurora Project.
- Enabled support for BoostPulse on the Interactive governor.
- Added support for NTFS and HFS+ filesystems.
- Added support for NFS 3/4.
- Added support for multiple tcp congestion algorithms.
- Changed the default tcp congestion algorithm to Westwood.
- Removed all debug options. Kernel is compiled in release mode now.
2012-12-30
- Fixed bluetooth disconnecting when screen off. Note: When bt is on, the phone won't go into deep sleep.
- Fixed wireless hotspot. When hotspot is active, wifi will not go to sleep so tethering will work fine.
- Merged marsgod audio/media fixes from his github.
- Merged a ton of fixes from nvidia and broadcom.
- Reduced carveout to 128M so, well, you get 24M of additional ram for free.
- Some more fixes to the wifi module, so it drains even less battery in deep sleep.
- Removed the conservative governor when in sleep, possible cause of BSODs.
- Set deadline as default i/o scheduler and tweaked a bit the parameters.
Before installing these kernels, just two things
1) This is only for the new bootloader. Don't install it on the old one or your phone won't boot.
2) Wipe dalvik and cache in cwm before flashing a kernel. No data wipe is necessary.
For kernels >= 2013-01-06
- Make sure that in Settings -> Performance -> Processor it's set as default the DynInteractive governor, and that in Settings -> Performance -> I/O Scheduler the default is ROW. For both tick the "set on boot" option and reboot. The DynInteractive seems to behave perfectly in terms of frequency ramping so far and keeps the system running mostly on low clock speeds, unless really needed (games, heavy browsing, etc).
- To enable the wifi conservative mode, via adb/terminal, type "su" and then "echo 1 > /sys/module/wireless/parameters/max_pm". This setting will not stick across reboots, but will take effect as soon as you turn off your screen.
- They will work only on roms with a date >= 2012-12-28
---> 2013-01-13 ---> pengus-kernel-20130113 + Wifi-Conservative-20130113 (only for this kernel)
---> 2013-01-11 ---> pengus-kernel-20130111 + Wifi-Conservative-20130111 (only for this kernel)
---> 2013-01-10 ---> pengus-kernel-20130110 + Wifi-Conservative-20130110 (only for this kernel)
---> 2013-01-07 ---> pengus-kernel-20130107 + Wifi-Conservative-20130107 (only for this kernel)
---> 2013-01-06 ---> pengus-kernel-20130106-v2 + WifiModule-Fix-20130107 (only for this kernel)
---> 2012-12-20 ---> cm10-kernel-20121230
Warning, dragons ahead !
1) Enable Swap on the unused SWP partition (/dev/block/mmcblk0p4) - Thanks to wfd for the idea
This will grant you 370mb of swap space.
On heavy duty this will maybe slow down marginally your phone, but trying is for free and that partition is 100% wasted otherwise
Download the SwapEnabler.zip attached to this post and flash it in cwm. Done
2) Fix Nitz time on V30A and SU660 basebands
So your timezone is totally crazy ? Just add "telephony.test.ignore.nitz=true" to /system/build.prop and reboot. This will fix it.
Don't know how to mount/remount edit files on android system ? Learn from above or... flash NitzDisabler.zip attached to this post from cwm
3) Swap External/Internal sdcards - Thanks to Imperticus
Check out this post and download the file attached to it. Just flash it in cwm and your sdcards will be swapped
4) DPI Changer - Thanks to Tonyp
Check out this post and read it carefully
5) Working GTalk Audio/Video !!! - Thanks to wfd
Say thanks to wfd on this post
6) Interesting post on how to get a perfect GPS fix - Thanks to tetsuo55
You can find the post here and don't forget to thank him !
7) Working FaceLock for CM10 roms ! - Thanks to flopower1996
Here's the post where you can thank him and download the apk: http://forum.xda-developers.com/showpost.php?p=37795310&postcount=3044
.

CM10 for the Unlocked ICS Bootloader Changelog
Code:
2013/05/14
- Fixed two major RIL bugs
- Call Forwarding Options
- In-Call Mute
- Merged all upstream CM changes up to today
- Optimized the thumbnails handling
- Optimized the media scanner process
- Added the option to center the clock on the menu bar
- Added hardware key targets
- Torch
- Screenshot
- Quick Memo
- Power Menu
- Toggle Last App
- Long press menu key on lockscreen -> Torch
- Added Quick Memo app
- Ships with Smart Launcher and Nova Launcher
- Comes with a pre-release 122pre Kowalski Kernel
- Zen I/O scheduler
- A load of subtle performance and power saving fixes
- Fix for USB/AC reporting
- Removed all default live wallpapers, videos, wallpapers, etc
2013/02/08
General mods
- Nitx fix by TonyP - After flashing reboot again to make it work
- Updated wpa supplicant 8
- Updated dhcp daemon
- Trickster Mod preinstalled
- Kowalski Manager preinstalled
- PDroid Apk preinstalled
- Holo Launcher as default launcher
- Trebuchet removed
- Added iwconfig/iwlist
- Added alsa_amixer / alsa_ctl / alsa_aplay
- Removed VideoEditor apk
- Added libjpeg-turbo from Linaro Android
- Optimized CFLAGS for C and C++ parts
- Enabled Purging of Assets in performance -> memory menu
- Kowalski Kernel 011p4
Cherry-Picks from CM Gerrit
- FM Radio: Add support for FM Radio in Android
- SMS Usage Monitor: Prevent recurring usage Alerts
- Added cooler weather icons (thanks wfd)
- Fix for custom button and keyboad light values
- extend PreferenceActivity for title text on a single pane mode
- add criticalBatteryShutdownLevel; fix plugged/charging status
- bluetooth: prevent Android restart with buggy devices
- Allow purging of asset bitmaps
- Stop supplicant and dhcp before start
- audioflinger: Fix to release wakelock after closeoutput
- libstagefright:Buffer size needs to be set on Native Window
- Fix for NULL pointer deference when Audio Record fails
- Fix for audio playing on speaker when headset is removed
- surfaceflinger: Add all display connections to connection list.
- Mms: Take into account image rotation.
- MMS app: fix crash when MMSC setting is NULL
- Camera: Allow setting "profile-video-size" before recording starts
- Messaging: Add the ability to mark a message as read from the notification
- Add option to enable/disable Electron Beam Animation
- libsuspend: Correctly handle errors initializing autosuspend, to avoid exceptions later on
- Decode DHCP netmask option correctly
- Fixed an unused param warning
- libnetutils: Fix up the dhcp request arguments
- dhcp_utils: Add -f dhcpcd.conf processing
- vold: Add support for EXT filesystem on sdcard
2013/01/06 - CM10 Lights Fest Edition
- Merged 20130106 CM official sources
- Integrated the latest 20130106 kernel from op
2012/12/28 - CM10 Penguins Galore Edition
- Merged 20121228 CM official sources
- Moar love for the wifi chip (conservative pm by default)
- Fully blinking notification lights (thanks Tonyp for the fix)
2012/12/26 - CM10 After Christmas Edition
- Merged 20121226 CM10 official sources
- Loads of wifi-related fixes (deep sleep, power management, etc)
- Fixed battery animation when phone is off and connected to charger
- Fixed phone doesn't boot when connected to charger
- Added an install step that installs the lgdrm files
2012/12/24 - CM10 Merry Christmas Edition
- Merged 20121224 CM10 official sources
- Added PDroid support ! You asked for it, you got it ;)
- Added an install step that checks if the internal sd is readable/mountable. If not, it formats it automagically
- Removed CMUpdater.apk (thanks Tonyp for the idea)
2012/12/20 - CM10 for the new bootloader initial release
- Merged 20121220 CM10 official sources
- Fixed code to allow booting on the new bootloader
PDroid support thanks to pastime1971 for his patches in this thread and download the PDroid.apk from here
Custom CWM Changelog
Code:
2012/12/30 - Inverted the sdcards order in backup menu. Updated to 2.0.2.6.
2012/12/23 - Updated to version 6.0.2.5
2012/12/22 - Fixed home key not working in recovery
2012/12/21 - Enabled usb mass storage
2012/12/20 - Initial 6.0.1.9 release with fixed partition layout and product info
If you want to see what i did in code, you can find a detailed explanation here: http://forum.xda-developers.com/showpost.php?p=35736099&postcount=175
This recovery works perfectly fine also to flash Carburano's DJ X, civato's ICS with aroma installer and the upcoming cm10.1 (for new layout) from Imperticus. Tested personally going back and forth between my cm10 and the ones listed and all went smooth.

Whola..
I m gonna try this...
.
One question, recovery is modified, so it can use to flash other roms like topogigi or we need to change revovey again for those roms ?

RohanAJoshi said:
Whola..
I m gonna try this...
.
One question, recovery is modified, so it can use to flash other roms like topogigi or we need to change revovey again for those roms ?
Click to expand...
Click to collapse
Better if you revert to the one that came with the rom originally. It's in the nvflash pack.
The recovery is not really modified at code level, only how it presents the phone to the updater script so that cm10 installer doesn't complain.
I'm working to adapt the zip to the ics recovery, but it's taking a while... in the meantime this recovery is the only one guaranteed to work correctly for this cm10 version
Edit: updated OP. Tested with carburano's and civato's ics roms and they both flash correctly with this recovery

Cool. Will try this. Thanks pengus!
Sent from my LG-P990 using xda app-developers app

Sorry, but is cm10 or cm10.1 rom?

Can we flash moded 4.1.2 - > 4.2 Gapps to this?
Sent from my LG-P990 using xda premium

Is it possible to go from LG Official V30a to this? if yes, how please as i dont have the Boot Recovery mode on it after smartflashing Official V30a, please guide me...

kamiar said:
Is it possible to go from LG Official V30a to this? if yes, how please as i dont have the Boot Recovery mode on it after smartflashing Official V30a, please guide me...
Click to expand...
Click to collapse
Are U blind or just too layzy:
"
If you come from a GB Bootloader (cm7/9/10 - stock gb):
1) place the cm10 zip attached to this post in the external sdcard of your phone.
2) grab one of the ICS roms out there (Django Manouche X, TG P990 ICS V30A, or whatever you prefer based on V28 or V30).
3) replace the recovery.img file in the folder of the rom you downloaded with the one attached in this post.
4) nvflash the rom you chose following the instructions on the relative pages and let the phone boot fully (so it formats your internal sdcard correctly).
5) after first boot, shutdown the phone.
6) turn on the phone and boot it to recovery by holding power and volume down.
7) flash the zip file you previously slapped in the external sd card.
"
This should work for U

someone has already tried it? Some news regarding the call bug?

kamiar said:
Is it possible to go from LG Official V30a to this? if yes, how please as i dont have the Boot Recovery mode on it after smartflashing Official V30a, please guide me...
Click to expand...
Click to collapse
I think you need to unlock the bootloader first then root then install the appropriate CWM for the new bootloader. Then follow the instruction in OP for those already in new bootloader.

with the ADB/terminal command, do we typr it all in one go ?

If new CM10 out (or CM10.1) can we flash it instant or need to make something change before flash other rom?

Oh noo are you serious this rom is out? I think I have to take a day off because this rom will answer one BIG question! Damn nice work, thanks a lot for all the efforts.

You Need to change your phone partition layout.
k101d said:
If new CM10 out (or CM10.1) can we flash it instant or need to make something change before flash other rom?
Click to expand...
Click to collapse
You cant flash cm10 directly on Ics patition layout, as cm10 still works on old GB layout, so u need to go back to nv flash GB or use nvflash toolkit. :angel:

hellraiser said:
You cant flash cm10 directly on Ics patition layout, as cm10 still works on old GB layout, so u need to go back to nv flash GB or use nvflash toolkit. :angel:
Click to expand...
Click to collapse
OK get idea I check the updater-script both origainal CM10 and the new mod for this ICS partition layout and found mounting point different SO I think if I want to flash anyrom into this ICS partiotion layout I will try to edit updater-script.

call bug resolved?

anjo88 said:
call bug resolved?
Click to expand...
Click to collapse
Most important thing of this rom is we can enjoy the pink LG logo while booting CM10. Less important is the call bug, hopefully it's fixed too=)
Well, that's what this is all about isn't it?:laugh: Can't really say, but we all hope! Just installed, CM10 is damnnn SMOOTHH compared to 30A

x_justin said:
Most important thing of this rom is we can enjoy the pink LG logo while booting CM10. Less important is the call bug, hopefully it's fixed too=)
Well, that's what this is all about isn't it?:laugh: Can't really say, but we all hope! Just installed, CM10 is damnnn SMOOTHH compared to 30A
Click to expand...
Click to collapse
Yea it is faaasssttt I will today make a bunch of calls just to be sure

Dr.Ketan ROM Nougat I Jio VoLTE

Dr.Ketan ROM Nougat I Jio VoLte
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am sharing my N5 ROM here as it is reported working fine on S6E+. (Reported by @gtaelbordo)
Main thread is Here
Look to post #2 for ChangeLog and instruction for Nougat version.
PS : To use this ROM on S6E +, you need to select S6 E+ kernel from aroma while flashing ROM.
Also I am not following this thread so any bug report or query to be post on head thread with remarking of your device model.
.
XDA:DevDB Information
Dr.Ketan ROM, ROM for the Samsung Galaxy S6 Edge+
Contributors
dr.ketan
ROM OS Version: 5.1.x Lollipop
Version Information
Status: Testing
Created 2015-09-25
Last Updated 2017-02-14

ChangeLog
https://forum.xda-developers.com/showpost.php?p=62693867&postcount=2

Reserved 3

Reserved 4

Reserved 5

Reserved 6

Last

Updating.

ChangeLog and Download L1
ROM Features
Inbuilt features
- 300 fonts enabled
- All Language enabled
- Multi DPI. (No S-view support) - Right now not all app moded as well this mod is in beta stage and some glitches expected. Launcher is moded for no DPI and camera not fully.
- Ad Free (you can disable from Dr.Ketan Utility)
- Auto Call Recording - Auto call record included On/Off from Dr.Ketan utility
- Manual Call Record - ROM Control - Native call record
- Power Menu -5 Way Reboot mod with sound mode
- CSC features - Separate app for CSC features
- All App Multi Window (optional in ROM Control)
- Camera Hack - Use camera with Flash at low battery + Camera shutter sound toggle
- Call/SMS block
- No Increasing ring tone. (Extra Settings- Other mods)
- Memory Clean option on expanded notification with switch (Extra setting-Memory Clean view) Also Color can be set. (Extra setting-Other Mods-color-Memory color
- Mute/Vibrate/Sound option in power menu.
- NFC hack with screen off (ROM Control)
-.Appoops (permission manager) Settings-LockScreen and security - Application permission
- No call delay mode (preactivated)
- Center clock option (separate zip available in Add On later
- Advanced Messaging features
Split view toggle
Priority sender
Delay sending option
No SMS to MMS conversion
Backup/Restore option
Scheduled message
-New lock screen unlock effects (Dr.Ketan Utility)
Circle
Stone keeping
- Email Security bypass (Extra settings - Toggles & Colors -Email Exchange security)
- Enable 30 Toggle (Extra settings )
ROM default have stock number of toggle but you can enable extra toggles (total 30) with single click without reboot.
- Number of scrollable toggles (Extra Settings)
Stock allow you to set 10 maximum toggle to scroll, here you can make all 30 toggles to scroll in notification layout. Requires reboot.
- Toolbox and Side key from Note 4
Toolbox enabled with ability to add 12 application) Credit and Thanks to @daxgirl @Wuby986 for Toolbox controller.
SideKey panle from Note4 (No edit option)
There are multiple ways to enable Toolbox and SideKey
1.You can enable 30 toggles as said above which have both toggles
2.There is separate application available 'Toolbox Sidekey' in ROM which have option to enable both application separately as well you can edit Toolbox app.
3.One more facility included in Toolbox Sidekey application is shake to enable/Disable Toolbox/Sidekey/Both
Once you enable this option you can just shake device Lt to Rt while display is ON to toggle Toolbox/SideKey/Both depending on your selection.
- Dr.Ketan Utilities
1.Toggle
Auto record Incoming call
Auto Record Outgoing call
Auto GPS (GPS will auto ON with some common app needs GPS)
Auto Wifi (Wifi will be turn off if remains disconnected for 10min)
Auto Blutooth (will be turn off if remains unpaired for 10min)
Smart Network (Mob data will be switched off after 30 sec of screen off)
Media scanner Enable/Disable
Login security - captures image with wrong password login with multi attempts.
Ad-free
2.Tasks
EFS Backup (will be available in next version)
IntSd FIX (fix for unable to save on intSD)
Flash recovery/Kernel/Modem from intSD
AutoScan - Enable media scan only while connected to power/USB
3.ROM
LockScreen unlock effect Particle/Stone keeping/Circle)
Meet here - Car finder
4.Help
general info
- ROM Control
NFC hack
Recent Panel Quick Launch (Keep App desired App shortcut on recent App)
Menu key assign Menu/Recent (If you select this option then you may use Virtual key for Multiwindow & Recents)
Native Call record enable/disable
Enable LTE option (In case missing on N910C)
Enable All App in Multiwindow
- Extra Settings
Heads up Notification
Fast Charging
Popup blocker (Not sure exactly what popup blocks but should block some miscelaaneuous popup related to location,Battery etc)
TotchLight with Long pressing volume while screen off
Toggles (switch on the fly) - 1.Increasing Ring tone 2. Network Meter 3. Memory View
Color Option - 1.Internet meter 2.Memory view
- Virtual key
How to use virtual key :
Open Virtual key - Tap on Right/Left button to enable corresponding virtual keys. (long press to disable)
To assign keys- scroll selected action from tab and tap on selected item to set (message will be displayed on successful assign)
Now long press bottom corner of screen to perform selected (assigned) action.
Each key have following options to assign
None
Browser
Calendar
Contact
Home
Menu
OK Google
Power (Long Press power action)
Recent
Search
Sleep (Power button to turn off screen)
Screenshot
S-Voice
Sattelite view
Multiwindow
Battery
- CSC features(some features not tested)
Enable camera during call
Enable Popup Notification
Shutter sound Menu
Enable Sub Menu Symbol KB
Raise name lenth limit
Max speed dial 100
Enable call button
Enable export to SD
Message
Raise recepient limit 999
SMS to MMS threshold 999
Enable folder view
Enable font features
Enable schedule msg
Disable phone nu formatting
Phonebook digit matching
Launcher Rotation
Web exit option
Wifi client 10 for MobAP
MultiWindow addOn App
Calender export
Email White BG
Clock enable Auto on off menu
Voice call waitingtone 60
National Roaming Icon enable
Web default desktop site
- ROM cleaner Included in ROM. you can select Lite/Full version of ROM. Best to use this feature immediately after instaling ROM before updating any application.
Installation Instructions.
Important : All users requested to make EFS backup if you are already rooted device. Otherwise make backup as soon as you root device.
1.You must be having custom recovery to flash this ROM. You can use TWRP/Philz CWM according your choice. Recommended is Philz recovery
How to flash custom recovery?
First go to setting-about device-software info and tap 7 times on build number
now look to setting and you will find developer option just above about device.
Enable OEM unlock
Switch off device
Reboot to download mode (Vol up+power+home)
Select downloaded above said Philz recovery with AP tab of Odin and flash.
Reboot to recovery and now you should have custom recovery.
In case still you have stock recovery then follow this
Again reboot to download mode
Select recovery file with AP tab of Odin
Now uncheck Auto reboot option
Flash selected file
Once flashing complete, disconnect device and long press Vol down+Power
Once screen turns off, immediately press vol up+power+home to reboot to recovery manually.
Now you have custom recovery and proceed to flash RO)M.
2. This ROM doesn't have kernel/modem included as it requires custom kernel to root device otherwise device won't boot.
Get @arter97 kernel from here OR @g.lewarne kernel from here
Download custom kernel and copy to device.
3.You also require to flash SuperSU by @Chainfire. Download Beta SuperSU 2.49 and copy to device
4.Download G928I Dr.Ketan ROM L* (Link below) and copy zip file to Device.
5.Installation :
-Reboot device to Recovery
-Select Wipe option - Factory reset
-Select N920I Dr.Ketan ROM zip
-This will start calculating md5, wait till it finish and match MD5 with download page of ROM. Once it match - select 'yes' to flash ROM.
-Once ROM flashing finish - DON'T REBOOT Device but again select to Install file
-Select Kernel file you have copied
-After this yet DON'T REBOOT DEVICE but
-Flash Beta SuperSU 2.49 you have copied to device.
Now reboot device and keep patience for 5-6 minute to boot device.
G928T (T-Mobile) user can use this ROM but they have to flash Call Audio Fix otherwise there won't be audio while on call.
Download
DrKetanROM.com
Add On
- 3Minit battery mod - Flash from recovery - Available soon
- Center clock -Available soon

Great to see the first real rom for the Galaxy Edge Plus.
Thank you dr.ketan !

Does this rom compatible with Indian version 928G.
Sent from my SM-G928G using Tapatalk

installed over stock rom
works great inc. xposed
thank you
@dr.ketan
sorry - G928F

amitbhavi said:
Does this rom compatible with Indian version 928G.
Sent from my SM-G928G using Tapatalk
Click to expand...
Click to collapse
You can try and report here.
datom84 said:
installed over stock rom
works great
thank you
Click to expand...
Click to collapse
Whenever you report kindly mention your device model so it will be helpful to others.

dr!!!!!!!!! whatsup.....tel me this realese is exact as the test you send me to check???

OCH 2 is newer than AOH4?
Trimis de pe al meu SM-G928F folosind Tapatalk

After wipe option - factory reset
I think everything will removed .. including the ROM file .. is that right ?
Sent from my SM-G928C using Tapatalk

No. Wipes only your System, not your data.
Sent from my SM-G928F using XDA Free mobile app

Any screenshots except those 2 in first message?

nulledapk.com said:
Any screenshots except those 2 in first message?
Click to expand...
Click to collapse
It is same like stock. My ROM doesn't contain any visual changes (like theme etc). All features are just functional.
Sent from my SM-N920I using xda premium

Try it now on my G928F. Will report if it's ok