Database Develop

Stuck at sending boot image....

Hi I am stuck at flashing a boot image in Fastboot.. please help... I am S-on (htc dev unlocked) Right now am using the ViperVIVO 2.1.7... but am not being able to use the wifi... I read somewhere that this due to kernel issue, so I flashed Redux_0.3_ProjectX kernel in reovery (i.e installed the zip file in recovery) than booted into bootloader and ran fastboot usb..than extracted the boot image from the zip and put it in the android fastboot folder. After that flashed by typing fastboot flash boot boot.img but than it gets stuck there. it says sending image and stays there. Please help dont know what I am doing wrong. Thanks in advance

andzy said:
Hi I am stuck at flashing a boot image in Fastboot.. please help... I am S-on (htc dev unlocked) Right now am using the ViperVIVO 2.1.7... but am not being able to use the wifi... I read somewhere that this due to kernel issue, so I flashed Redux_0.3_ProjectX kernel in reovery (i.e installed the zip file in recovery) than booted into bootloader and ran fastboot usb..than extracted the boot image from the zip and put it in the android fastboot folder. After that flashed by typing fastboot flash boot boot.img but than it gets stuck there. it says sending image and stays there. Please help dont know what I am doing wrong. Thanks in advance
Click to expand...
Click to collapse
U are a s-on user... So u cannot flash a kernel directly...Dats y u broke ua wifi...dont u read instructions before flashing kernel???
http://forum.xda-developers.com/showthread.php?t=1899335
There is a kernel u can flash widout s-offing ua phone...The XS ICS
http://forum.xda-developers.com/showthread.php?t=1899335
here u can find kernel...read instruction in S-On section...
or
Reflash ua rom to work wifi again...if u want to flash kernel then s-off ua phone first...
here u can find complete s-off procedure...
http://forum.xda-developers.com/showthread.php?t=2118187
good luck...

So that is why I get stuck on sending...but even when I want to install the 4ext recovery over the cwm recovery, when I flash the recovery it gets stuck....and I am not able to flash the 4ext recovery...
Sent from my HTC Incredible S using Tapatalk 2

Ua recovery problem is kinda weird problem...i realy dont knw abt this...bt if i find smthnig useful foe u...i will tell u...
Sent from my HTC Incredible S using Tapatalk 2

Thank you all for helping me... the problem was with the htc drivers... once i reinstalled them all working back to normal...

flashing system.img from original rom ?

Hi
i want to replace my phone and bring it back
but i have flashed a custom rom
now i want to flash the system image from the original rom
fastboot flash system system.img
does not work
file is too large
can i flash it another way ??
thanks

[Q] When do I flash boot.img?

Hi.
I've got a problem. In all of the tutorials I read about how to flash ROM:s, it says that I have to flash boot.img through fastboot, then enter recovery and flash the ROM. I can not do this. When I flash the boot.img, I can not enter recovery or anything, I get stuck in a bootloop and have to restore through flashtool. When I flashed Taylor_Swift's 4.3 ROM, I flashed the ROM first and then the boot.img, it worked, I got up and running, but after that I couldn't enter recovery and therefore not obtain root access, making the ROM almost useless because the lack of the Battery Calibration app. Now I want to flash the PAC ROM, but I'm not sure how to do with the boot.img part. If it's relevant I have the lockeddualrecovery as my recovery.
Help please

Grozos said:
Hi.
I've got a problem. In all of the tutorials I read about how to flash ROM:s, it says that I have to flash boot.img through fastboot, then enter recovery and flash the ROM. I can not do this. When I flash the boot.img, I can not enter recovery or anything, I get stuck in a bootloop and have to restore through flashtool. When I flashed Taylor_Swift's 4.3 ROM, I flashed the ROM first and then the boot.img, it worked, I got up and running, but after that I couldn't enter recovery and therefore not obtain root access, making the ROM almost useless because the lack of the Battery Calibration app. Now I want to flash the PAC ROM, but I'm not sure how to do with the boot.img part. If it's relevant I have the lockeddualrecovery as my recovery.
Help please
Click to expand...
Click to collapse
No special order, really, as long as the kernel (boot.img) is fully compatible with the rom.
I'd flash PAC boot.img first though. Flash boot.img, then enter recovery and flash the zip containing the rom information.

Usually you should flash the boot.img that came inside the rom's zip and it should have a recovery,than you will have to install the rom from the recovery.
Don't forget to factory reset/wipe data inside the recovery.
Sent from my C6603 using xda premium

[Q] Installing custom rom on unlocked Z failing

Unlocked rooted xperiaz..
installed this: http://forum.xda-developers.com/showthread.php?t=2190936
(tried also with cwm)
After entering recovery cwm or twrp i can choose ROM: (tried paranoid android)
I'm on the latest stock firmware btw... 244..
After flashing i only get a red light, and nothing else works.. can get to flas mode and flash stock ROM, but everytime i try a custom rom it fails..
Where am i going wrong? I Know i **** up somewhere, but can't see where...

Try flashing the Kernel from Paranoid Android by itself. Inside the rom's zip there ahould be an image called boot.img. Flash via fasboot on Flashtool.
Now enter recovery and follow the normal procedure.

First of all that link to TWRP is for locked bootloaders. You need to have an unlocked bootloader to install a custom rom
To get recovery just flash the boot.img which is inside the rom .zip folder
Code:
fastboot flash boot boot.img
Then enter recovery and flash the zip then gapps.

[Q] Back to stock

Hi all,
I am a HTC guy and I'm not that familiair with the Asus way of flashing things.
So just to make sure I'm not doing something wrong here.
I want to go back to full stock including recovery and stuf. I have a WW version of the TF701.
What I found online is this:
- Flash http://droidbasement.com/db-blog/?p=3210 in recovery.
- flash latest WW update from Asus site.
Is this the correct and safe way?
Thanks
Frnas

Yep. That should work. Flash stock recovery, then flash stock rom.

Stock recovery? Is that included in the file from Droid basement?

Frazzy said:
Stock recovery? Is that included in the file from Droid basement?
Click to expand...
Click to collapse
Nope. But the flashable stock recovery is on the same page you posted.
CWM won't flash the stock firmware - I thought. But Droidbasement says otherwise... Try it and let us know!

AH, glad I asked it.. So I must:
- flash the recovery from droidbasement in CWM
- flash the ROM from droidbasement in the flashed recovery
- flash the latest ROM from the asus site
That's the right order?

I haven't looked at your link but I don't think you can flash the stock recovery from cwm. You will need to fastboot flash the recovery from your computer.

Frazzy said:
AH, glad I asked it.. So I must:
- flash the recovery from droidbasement in CWM
- flash the ROM from droidbasement in the flashed recovery
- flash the latest ROM from the asus site
That's the right order?
Click to expand...
Click to collapse
The instructions at Droidbasement state that the 4.3 OTA is flashable from CWM. But you have to be on the latest version 6.0.5.1.
Maybe they fixed it. With earlier versions it was not possible to flash Asus firmware in CWM, but these guys know a lot more than I do, so I would trust them.
You do have to be on the 10.26.1.18 bootloader though!
The site states it's a full system/kernel flash so it probably won't replace CWM with stock recovery - don't know.
Check once you flashed the OTA.
And don't forget to wipe /data in CWM before you flash anything.