Related
Looks cuwl but I think it would be better without the beltclip:
http://www.innopocket.com/EShop/Main/product.php?ID=63
If you are looking for a sleeker look check out www.proporta.com, they have a design in development , hence the special offer, but you will have to wait a while for the alu case about a month or so, but hey who's complaing when you get freeby!
roko said:
Looks cuwl but I think it would be better without the beltclip:
http://www.innopocket.com/EShop/Main/product.php?ID=63
Click to expand...
Click to collapse
just got one! its really cool and sleek design... :lol:
I ordered the Proporta about 6 or 7 weeks ago. I received nothing since then (apart from the useless neoprene wallet). Looks like it's going to be a long time before it is finnished. I think the Inno looks far better too. I'm thinking about ordering one instead of the Proporta.
Damoncarl, could you please tell if the beltclip could be removed without to much damage?
Does the case have enough room for the extended battery?? 8) thinking of getting one if the proporta case doesn't have room, by the end of the design reveiws... and it looks like you have to keep removing from the case just to charge or use it.
It looks that neither have room for the XDA+battery.
Both the Inno and the Proporta have their pro's and con's. I think the Proporta is better for daily use, you don't need to remove the XDA from the case before usage. The Inno on the other hand gives far better protection since it completely encloses the XDA.
roko,
judging from the design I can't see how the xda can be used/charged from the case, asking cause that's the way I use mine, and everybody uses their case differently...the Inno case looks to provide better protection, (I have four cases I use depending on my daily use, guys tend to stick to one case, women tend to co-ordinate the cases with their outfits and bags!!) and your right in the respect that the Inno looks good, but as always, looks don't mean a thing if it aint practical (men inclusive in my opinion :twisted: ) and as you already have the case I'd rather pick your brains on it than have a sales person deliberatley trying to sell me something based on looks....
The Proporta has an opening at the bottom so I guess you can sync/charge and replace the smartcard without having to take it out of the case. Here's a better view...
http://www.proporta.com/Zoom.asp?id=XDAcase1.jpg
But still, it is in developement, images of the final product are not online yet (I asked for them but no response so far). The final product could differ. Wait and see
And so my choice is confirmed, da girl goes proporta! spoke to them today they say no to the batttery space but I guess I can't have all
Hopefully you won't get bored waiting for it (like me) :wink:
Did you by any change asked them when the case should be ready for shipping? I keep hearing "probably the next week" :?
roko
Yep, I did ask and was told not for ages as they just rejected the proto-type last week, apparently because you would have to remove the xda from the case for charging etc and that's not what was agreed to design wise....the guy I spoke to was so annoyed he told me not to bother ordering it yet!!! to wait a month but I will... just to have yet another case to co-ordinate.
(as women do :wink: )
Another month
I'll order the Inno so I'll have atleast one case (for the time being) :wink:
I've got one (the innopocket case) and I'm very Impressed with it. Although like anything its not perfect.
Here goes an honest review.
If you think the xda is already too big, dont buy this. If you want to protect your machine while carrying it - its like having an armoured tank protecting it! Imagine your dads old tobacco tin in brushed aluminium with a neoprene 1.5mm lining and there it is.
Its very well built - it does have a serious "no messing about belt clip" that you'd have to have serious impacts hit by a car for it to fall off. I'm a cyclist (during the week ; ) - so you'll have to excuse my practical thinking!
I think the only serious damage you could do would be to the antenna, which is the only potruding part, and even then, if it was on your belt that would never happen.
I did however make one major "mod" when I got it, I got out an electric drill and file and made a headphone socket hole straight away!
Being made of aluminium its very easy to do this, in theory you could do the same for the charger connector.
Street Cred
Although its very practical, to be frank I'm embarrased to carry it in "open view" on my belt, because it is ridiculously large. Under your jumper or jacket it acceptable. Or in your baggy Jeans pocket is another fine alternative.
In use
I even answered a few calls while listening to Mp3s in slough town centre last week, obviously the nice thing is that with the standard handsfree headset you can answer the call with the button on the mic pod, and not have to get the damn thing out of the case. Obviously in normal phone use its a pain to "unholster"
I think the main oversight is a lack of a charging hole, I think a pda on a desk with a charger lead hanging out of it is asking for trouble, one slip and your "preciousss" will go swinging to a clattering smash onto the floor, so I'd love to encase it with the innopocket during charging. (I'm getting the drill & file out now!)
Opening it Up
It did seem too much hassle to change tracks on media player by "getting it out of my pocket, opening it up, changing tracks, and closing it etc. So I just listened to my mp3s on "shuffle mode" it would be great if one was designed with buttons integrated into it, perhaps so it slots into the bottom edge connector in the same way as the clip on keyboard.
At times like that I was glad of the volume control on the headphone kit!
The opening up catch is nice and firm, so its very difficult for it to open accidentally, and as it opens "upwards" in theory as long as you are standing or sitting, it wouldnt fall out.
One of my friends did force it open because he didnt understand the way it opens, but in actual fact its made the case easier to use, because the stress exerted on the aluminium hinges if you do this enable you to open it further, to about a 80 degree angle from the closed position. This means that if opened on your belt the xda delivers at 45degrees or so.
Build Quality
I think in terms of build quality it is excellent, and certainly does protect the machine All edges were finished off smoothly, all neoprene stuck down well, definately a quality product.
Capacity
Havent tried it with the extended battery, as it hasnt arrived yet, I'll let you know if it fits, or if it can be modified.
Advantages
1) serious protection
2) serious beltclip that wont fall off in usage
3) Aluminium, lightweight, tough, and easy to mod!
4) Website order to Delivery time (under a week) and thats delivering it by airmail from suppliers in Hong Kong.
Disadvantages
1) Overall Size (too big and roomy - I'd prefer a snugger fit!)
2) Beltclip: My only criticism is that the belt clip cannot be removed, its riveted on, and being aluminium, if you removed it I guess you'd never get it back on. Otherwise its the best engineered beltclip I've ever used, I wish my old Cooltrax mp3 player's case had such a good one.
3) the only downside of course is removing it from the holder. to use it, its not exactly "quick release"
4) usual packaging problem though, when it arrived it looked like it had been opened a dozen times en route, cardboard box was creased and torn "open", but the product was intact and undamaged - I guess customs at several points opened it up to see what it was. You'd hope they'd stick tape back over it. I'd hate to send anything of a greater value that distance!
Opinions
Buy two. One for "on your belt" (modding it for headphone hole)
The other for in a bag or pocket, with the belt clip removed! and mod it for charging/mp3 playback.
The one thing I like about it is that it doesent spoil the look of the thing itself when you're actually using it. The standard O2 case sucks in that regard, and looks disgusting in my opinion. And lets face it the most dangerous aspect of using a phone/pda is putting it down. e.g. falling asleep with it on your lap or chest, or even charging it up.
When its in your hand you hang on to it for grim death. Putting it into the case is the riskiest part, especially cycling along, but hey, even doing that on a pavement is a big risk! And as I mentioned this was a doddle!
Walking along and holstering it is more of an embarrassment risk than a risk of dropping it because as I mentioned, it opens very sensibly.
Possible Improvements...
1) add a hole for charger
2) add a headphone hole
3) make the belt clip removable
4) make it less "thick" (width wise)
5) slots for memory cards inside the case, although there's plenty of room to just have them "floating around" - that said, would you risk an £80 memory card dropping out while you're walking.
6) add a button for skip track for when in mp3 usage
Conclusions
Protection 98%
Practicality 40%
Style 30%
It does "what it says on the tin" :lol:
"protect your investment"
Can you please provide a cost for the aloy case for the xda & approximate delivery cost to Australia
Thanks Peter
Follow the previous mentioned link http://www.innopocket.com/EShop/Main/product.php?ID=63 and you will see the price.
I fully agree with Derek's review but like to add a couple of disadvantages:
1) The spring mechanism started to wear out in the case I had. I had to bend them back into shape.
2) Although perfectly padded on the inside there is the possibility of having the metal on the inside come into contact with your screen. Maybe it is just me being clumsy but I was nervous every time the XDA went into or out of the case.
I stopped using it and it is lying around somewhere here.
Robert[/list]
Mine's now laying around as well... climber!
Unfortunetely it wont accommodate the extended battery
Update on the Proporta hardcase:
It seems that the first 1000 will be shippped early July. Hopefully I will be one of the lucky bastards because I'm waiting for it since last January.
http://www.proporta.com/Zoom.asp?id=Alu_XDA.jpg
Hmm... Re the Proporta case, it looks like someone else had my idea about holes for connectors!
It looks a bit slimmer than the innopocket. I'm hoping it has a cutout in the back to allow for the extended battery to poke out as well...
Somehow I dont think they will think of that one, otherwise it looks a much better design. Do let us know with a full on review when you get it Roko....
Hi I got the ali case, the thing is almost twice the width, but I really needed to stop the XDA from crashing out of my pocket, so I tried it for a few days, its like an ejector seat, My xda has hit the ground 6 times in one day, I lost my pen & a big card I had in it. Sorry it has gone in the draw.
Hi, i got my proporta ali case this morning - seems quite nice Very light and doesn't bulk up the device too much! Very strong too, no way i'll loose the screen with this baby on. All connectors/buttons can be got to with the case closed.
Will test it over the next few days!
Hello all... I'm new to this forum but have found it quite helpful in my quest to optimize and get every bit of juice out of my HD2. I have looked through so many posts trying to find information on stands as I have just purchased my apple bluetooth keyboard for use as a note taking device at school. I was going to buy another eeepc after I sold mine, but realized that with the keyboard this baby is actually quite powerful enough to be a baby computer at school. A lot of the stands seem really cool but I was wondering if anyone had found or figured out a way to modify a stand that could securely clip onto the space at the top of the apple keyboard.
Attached is a link to an image of the keyboard to give you an idea of what I'm working with. Seems the space at the top is about an inch. As I can't seem to find one I can buy yet, I've been trying to think of ways I could create a clip on from one of the stands like the smart stand but thought I'd throw this out to you guys for some ideas as I'm not getting very far. Sorry if this has been covered before, but I did do a lot of searching and didn't seem to find anything like this in particular so thought I'd post.
And, btw, I'm Elle. Nice to meet you guys.
Cool idea...let us know if you figure something out.
The whole concept just sounds strange to me. Using a small phone with a massive keyboard just to do some notes. Granted both devices are beautiful but working them both together, er no.
However each to their own and all. I can't think of a way to attach them together which wouldn't inherently ruin either the phone or keyoard but what I'd do if I was so inclined to use them both together, would be maybe buy the extended battery with kickstand and then use it like the image below (obviously you wouldn't need to lean your phone against the wall with the kickstand ).
I fail to see why the HD2 needs to be attached to the keyboard in the first place .
Update - my girlfriend has suggested you just use a bit of blu-tac lol.
That's what I've been doing, just without an appropriate stand but a self-created one. It's actually a rather cool setup; this is the smaller version of the keyboard and it decreases the weight I carry around immensely. The keyboard syncs wonderfully, I just thought it might be cool if there was a way to attach it to the keyboard. I'll let you guys know if I figure anything out specifically, there seems to be some interesting ways to manufacture a simple clip on that I'm figuring out the details for at the moment.
Did you ever figure out a simple stand? I just bought one of these keyboards. and it paired perfectly and all the keys work, except the specialized function keys.
Compared to other available bluetooth keyboards (Stowaway, Freedom, etc.), this one is probably overall less space (by volume) and lighter.
Cheers
Capdase stand
hi. Just to let you know that this stand actually works.
Alright, ignoring the iPhone (it sux anyways. ), the translucent stand thats holding the phone actually fits the hd2. Not only that, I have the silicon casing around the hd2 and the stand still fits! Of course, it stretches as the iphone is of a smaller width. How do i know? I tested my bro's stand and it has been with me since. Lets just say that the holder was no longer meant for the iphone due to the bigger hd2. I.e. Its mine!
P.s It goes horizontal and vertical.
There's a couple of threads on make-your-own stands My favourite is the credit-card one, which you then fold out whenever you need it. Keep it in your wallet/as part of your phone case and you're there!
http://forum.xda-developers.com/showthread.php?t=603363
iPhone stand
CCheck out this one: w w w. northsecure. com/iphone-stand/ (remove spaces)
Old thread, but anyway the extended battery with it's kickstand would do this amazingly
Last night I got inspired (by the Netflix app ) to make a functional and nice looking stand. But instead of jumping in blindly with plexiglass or something I built a prototype out of cardboard.
I was thinking of making the final version a bit smaller so it fits nicer when vertical and maybe making a notch in it so the home button is accessible. Something I can't figure out how to fix is that the speaker is inside the stand when vertical. But other than that I'm really happy how this turned out and can't wait to make a final version.
Attached are some pictures of it holding the Nook horizontal and vertical. Any comments, ideas or questions would be appreciated. Thank you.
Not bad though if you are worried about the speaker it would be realy easy to rigup a pair of speakers with a 1/8" stereo jack on your final build
Wouldnt it just be easier/cheaper to buy one of those stands?
Im all about making custom things, but in this case, I dont see the benfit of what you made versus this: http://www.amazon.com/Arkon-Portabl...VOOY/ref=sr_1_2?ie=UTF8&qid=1305477985&sr=8-2
michaelg1030 said:
Wouldnt it just be easier/cheaper to buy one of those stands?
Im all about making custom things, but in this case, I dont see the benfit of what you made versus this: http://www.amazon.com/Arkon-Portabl...VOOY/ref=sr_1_2?ie=UTF8&qid=1305477985&sr=8-2
Click to expand...
Click to collapse
Ah phooey! I see the benefit of DIY. True, sometimes there are cheaper solutions out there. But this user's solution gave "me" many ideas for other devices, my wife's iPad, my Evo, Books! I like the ingenuity involved in the OP's solution. I'm going to make something like this out of plexiglass--the OP's idea. 1 sheet of pl (home depot), my jigsaw, some cement, buff the edges, felt the edges to protect the nook, rubber little feet (Rite Aid), listen to jazz while I'm making it and have a blast! $20. It's going to look a lot better than a little cheap rack holding holding up a nook. Nice going!
I agree, sometimes it's about the journey, not the destination.
michaelg1030 said:
Wouldnt it just be easier/cheaper to buy one of those stands?
Im all about making custom things, but in this case, I dont see the benfit of what you made versus this: http://www.amazon.com/Arkon-Portabl...VOOY/ref=sr_1_2?ie=UTF8&qid=1305477985&sr=8-2
Click to expand...
Click to collapse
I have one of these and, while it's great for my XOOM, it doesn't really fit the NC very well. It's OK for landscape but if you want your NC to stand in portrait while charging you have to put the stand on a book or the edge of a table to allow space for the cable. Actually I found this thread because I was looking for a better stand.
I definitely see the advantages of DIY to satisfy your own requirements. Good luck!
I use this case stand since I got my Nook Color in January. I see that now Amazon for fulfils the orders for it now. I had to wait two weeks back then but it was worth it. No excuses not to get it now.
http://www.amazon.com/rooCASE-Leath...3?s=electronics&ie=UTF8&qid=1306015551&sr=1-3
Get a good Bluetooth keyboard I actually bought the Apple one from Amazon and you're in heaven.
So lately I've been trying to figure out a way to get my tablet mounted at the optimum position for GPS usage without obstructing anything. In my van I have the Arkon seat bolt tablet mount, which is perfect because it keeps the tablet lower in the dash area so it's not blocking my view or baking in the sun, and it's also a solid mount point. I'd have no where else to mount it in the van aside from the window if it wasn't for this mount, and I absolutely don't like window mounting anything bigger than a cell phone. So in that instance, things work out great. Recently I put that Arkon mount in my car, which is a Hyundai Elantra. I thought since the distance from the seat bolt to the mount area would be less, I'd have more (if anything, too much) "neck" to work with. It turned out to be the opposite. My Elantra is stick shift, so when I had the tablet mounted in the most convenient spot that reached, I was all but punching the screen when I went to 3rd/5th gear. The only other alternative was to have it sitting over in the passenger area, which works for me but it adds as a huge inconvenience to any passengers in that seat since their left knee is where the tablet is. As a result I decided to put the Arkon seat bolt mount back in the van and work on something else for the car.
I have an empty space under my head unit for random storage, etc. I began to wonder if I could somehow utilize that space for incorporating a mount there. It would be the perfect height because it's higher up from the gear shift and it would definitely be optimum viewing for GPS usage. Originally I made the perfectly sized wooden block that had a slight slight slope to it so it would wedge itself in place. I then epoxy'd a BluRex Amazon case to it that I wasn't too happy with and was no longer using. This proved to be an awesome 10 minute mount, but it also gave me zero adjustability. I began to think was going to be important since last time we were on a road trip when the road I was on was going to be 3 hours long my wife watched a movie, so I knew I'd want a way to move it around for best viewing in multiple scenarios.
Here's two pictures from that build:
http://i.imgur.com/dsfQx.jpg
http://i.imgur.com/guw86.jpg
I began to give it more thought. I knew that the empty space under my head unit was going to be the mount point, but I just had to figure out how. I searched through multiple mounts, particularly from Arkon. In the end I bought this mount on eBay for about 20 bucks. It came with a suction cup which I knew wouldn't work for my uses. My plan was to cut the arm off, drill a hole into a wooden block, then fill it with epoxy and shove the arm in. The block of wood in question would be a piece that I cut to perfectly fit the open slot under my deck with a slight slant to it, that way as I pushed it in, it wedged itself in place (much like the last mount)
When I got this mount from eBay I began to wonder if I even needed to cut the arm off. Fortunately the height of the suction cup base was ALMOST the height of the opening in my dash. I figured all I had to do was wedge that in place and I wouldn't have to do the whole sha-bang with the wooden block and epoxy. I ended up cutting off the suction cup since it was useless in my case. The bottom of the plastic suction cup area had some flat ridges, so I figured I'd use double sided tape instead of epoxy to adhere it to a flat piece of wood. The flat piece of wood was to bump the thickness up just enough to replace the need for that wooden wedge.
http://i.imgur.com/yHOLR.jpg
http://i.imgur.com/l9mRO.jpg
http://i.imgur.com/O4Gin.jpg
http://i.imgur.com/KFJad.jpg
In the last picture you can see that I flipped things around. Originally I had the arm facing downward, but when I had the tablet mounted, 5th gear was still a problem as the gear shift would nearly hit the tablet. I knew if I flipped it upside down the arm would be facing upward, giving me some height... so I re-did the tape and put it on the other side. Since I mounted it more to the right (to ensure there was a super low chance of the steering wheel ever obstructing view, even if I was leaning far to the left while driving) I sensed a small amount of uneven stability since there was nothing keeping the left side tight against the roof of the opening. A small wooden wedge later and we were golden.
http://i.imgur.com/t7v4P.jpg
I ended up painting that wooden piece black to blend it in a little bit. I also noticed while driving that some roads had a degree of ripple to them, which would cause the tablet to sway back and forth. It didn't obstruct my view-ability of the screen at all, but if I was in an area where the tablet was casting a glare from the screen it became more obvious. On a hunch I pulled out two quarters and slid them under the arm mount, which is where I thought I was seeing a degree of flexing. Surprisingly it helped quite a bit and that area no longer has any flex. Not bad.
http://i.imgur.com/gzcV0.jpg
Final product:
http://i.imgur.com/LoUZT.jpg
Hopefully those of you out there who are finding some tablet mounts are *almost* perfect but not a home run can utilize some sort of DIY ideas like I did to make it work. I now have a solid mount for both vehicles, so no more worries about where the tablet will sit, etc. No complaints there. :good:
Great mod! I too have a compartment like that when I replaced my factory double din to a single din radio. To compensate, I had to put in a CD holder type opening, much like your area. I just have slots for CD cases. In my case, it wouldn't work out too well because my opening is held by epoxy and because of the texas heat, loses it's adhesiveness big time and alas, too weak for N7.
I have since bought a Kropsson Aero, which can hold both my tablet and Sensation. I do wish someone made a mount that can fit like the Aero can. Oh well, sorry to detract, just wanted to give you some kudos in getting a mount that works for you! :good:
I'm curious on how the epoxy is failing you. Is it not gripping like it should? A little side story - I epoxy'd a cracked side skirt in my first car, and when I got tires one day the hydraulic lift bowed the sides out pretty dramatically. (this wasn't a body kit - just lower siding from the factory. Here's a picture of a car nearly identical to what I had). It took the weight of my car for 30 seconds on that lift before the pressure was enough that it broke the epoxy bond. We may not have Texas heat, but here in Pennsylvania we have some crazy cold winters and some pretty muggy summers... I would think the differentiation wouldn't be good for epoxy when it's outdoors and hitting rain/snow/mud/hot/cold throughout the years.
I'm curious if the surface you epoxy'd wasn't really that optimal for epoxy. I say that based on my own experience recently, as I thought for sure epoxy would bond to anything, and for the most part it does, but take a look back at the first pictures of the BluRex/wooden block mod I did. I epoxy'd those two things together. After I took it out of the car and didn't use it, I wanted to see if I could somehow separate the two. I figured if anything the epoxy would separate from the wood and the epoxy would have just stayed gripping to wood particles from the block. But it was the opposite - the epoxy let go of the semi rubberized BluRex case, pretty cleanly too. It took a good amount of force, don't get me wrong, but once done it was a pretty clean break. I'm basing this entirely on assumption as I don't know what you were bonding together, but I wanted to throw out those FYI's as part of my epoxy experience.
So, that Aero can widen itself enough for a Nexus 7? I Googled around and I keep seeing screenshots of it with iPhones and Galaxy 3's... not tablets. That's wild if it does. Does your's mount based on suction cup? Or did you do some sort of additional mod?
JaSauders said:
I'm curious on how the epoxy is failing you. Is it not gripping like it should? A little side story - I epoxy'd a cracked side skirt in my first car, and when I got tires one day the hydraulic lift bowed the sides out pretty dramatically. (this wasn't a body kit - just lower siding from the factory. Here's a picture of a car nearly identical to what I had). It took the weight of my car for 30 seconds on that lift before the pressure was enough that it broke the epoxy bond. We may not have Texas heat, but here in Pennsylvania we have some crazy cold winters and some pretty muggy summers... I would think the differentiation wouldn't be good for epoxy when it's outdoors and hitting rain/snow/mud/hot/cold throughout the years.
I'm curious if the surface you epoxy'd wasn't really that optimal for epoxy. I say that based on my own experience recently, as I thought for sure epoxy would bond to anything, and for the most part it does, but take a look back at the first pictures of the BluRex/wooden block mod I did. I epoxy'd those two things together. After I took it out of the car and didn't use it, I wanted to see if I could somehow separate the two. I figured if anything the epoxy would separate from the wood and the epoxy would have just stayed gripping to wood particles from the block. But it was the opposite - the epoxy let go of the semi rubberized BluRex case, pretty cleanly too. It took a good amount of force, don't get me wrong, but once done it was a pretty clean break. I'm basing this entirely on assumption as I don't know what you were bonding together, but I wanted to throw out those FYI's as part of my epoxy experience.
So, that Aero can widen itself enough for a Nexus 7? I Googled around and I keep seeing screenshots of it with iPhones and Galaxy 3's... not tablets. That's wild if it does. Does your's mount based on suction cup? Or did you do some sort of additional mod?
Click to expand...
Click to collapse
I just got the Aero in actually. It doesn't fit the N7 with my Seidio Case installed. So it's a fail on my end. It fits my Sensation fine, but thats a given lol.
As for the surface areas, I think you are correct that maybe the surface I am trying to apoxy to (on the car) does not play well/adhere with the epoxy I put on. No biggie though. I wanted something off the dash anyways. I may just get the exogear/kropsson mounts eventually...
EDIT: semi DIY modding LOL...
Just getting back, regarding the Kropsson Aero. Because of the Seidio case making the N7 bigger than expected to fit in the Kropsson Aero, I decided to cut down the foam pads on the sides. Now the N7 fits! The said arms are maxed out, but I will try it in the car after work. I took pics, but my work computer is borking at the card reader. But I'll try to upload them at home if I have time ( I have a 4 yr old to contend with lol).
I did almost the same thing, except the empty space is above my stereo instead of below. I just drilled some holes in the top of it and fashioned a plastic mount that bolts in and connects to part of an Arkon mount. If I want to remove the mount, I can just unbolt the Arkon part from the part that's bolted to the double din kit and you barely notice the rest of it.
I did something similar with my GNex car dock so it wasn't on my window. I placed a adapter plate (see link below) so I could use the suction cup on some interior plastic below my stereo. It holds pretty snug, not sure if it would be enough to support a tablet though.
http://www.amazon.com/AP020-Adapter-Circular-Adhesive-Console/dp/B001DAT0XE/ref=pd_sim_cps_10
xxgoosexx said:
I did something similar with my GNex car dock so it wasn't on my window. I placed a adapter plate (see link below) so I could use the suction cup on some interior plastic below my stereo. It holds pretty snug, not sure if it would be enough to support a tablet though.
http://www.amazon.com/AP020-Adapter-Circular-Adhesive-Console/dp/B001DAT0XE/ref=pd_sim_cps_10
Click to expand...
Click to collapse
I have that same disk that came with my tomtom gps that I never used. But it works! I have it installed and holds the arkon mount fine without issues.
ydoucare said:
I did almost the same thing, except the empty space is above my stereo instead of below. I just drilled some holes in the top of it and fashioned a plastic mount that bolts in and connects to part of an Arkon mount. If I want to remove the mount, I can just unbolt the Arkon part from the part that's bolted to the double din kit and you barely notice the rest of it.
Click to expand...
Click to collapse
Nice! Do you have any pictures of the actual mounting point where the bolts are? I'm super curious how you accomplished this. :good:
JaSauders said:
Nice! Do you have any pictures of the actual mounting point where the bolts are? I'm super curious how you accomplished this. :good:
Click to expand...
Click to collapse
I don't, I'll try to grab one and post it here.
I love the gameklip concept. Although, I do not love their "universal" approach. I don't want to have to click in and out of cases every time I want to use it. Also a full case plus the gameklip makes for pretty wide dimensions. I'm trying to find a mount of some sort (vehicle, desk, etc) that I can take a part and use just the part that actually grasps the phone and then glue that to the gameklip rather than a case. One that would work over a case would be excellent. So do any of you have any ideas? Do you have a mount that works with a case that you think could be hacked down to minimal size and then glued to the gameklip? I know I'm technically asking a question but I feel this post fits better in the accessories forum.
I like how Moga executed their phone holding mechanism. Something like that combined with a gameklip would be perfect!
Hi, I'm also interesting in this. so far what i think might work is a car holder having a flat surface in the back of the holder, unfortunately I haven't found one like this.