aa
aa
I believe rotate screen is press and hold power button for 3 seconds
You also have to go into the settings and enable rotation
aa
Rotating the screen for HTC Touch
I've used handcent for quite a long time but don't think there's a way for the messenger to auto rotate at starting. Just hold in power button for 3 seconds (as mentioned above by KralHiPolymer), let go, and wait for the rotate... This works when ever you want your screen to rotate to landscape, and again to rotate back to portrait mode. You might find the the keyboard pops up after this so you'll have to hit the back button (old camera button) once to pop the keyboard back down if you don't need it up, or alternatively hold in power button for just 1 second.
(this happens because if you hold in the same power button for only 1 second and let go it triggers the on-screen keyboard on and off)
Landscape mode is great for getting your keyboard keys a little bit larger for easier txt'ing!
If you search the forums close enough you'll find all kinds of cool button tricks (hard and soft) for your Vogue.
Related
Hello,
I got my device two days ago and all seems to work well. However, the hardware button that launches the camera application does not seem to respond when I click on it. Is anyone else experiencing this too? Is tyour camera application launching fine when you click on the camera hardware button found on the side of the device?
Thanks,
Gilbert
Half press or Full press...
The Camera has a setting that turns it on with either a Half press or a Full press of the side button.
It defaults to FULL so if you're at the Today Screen for example, Press it and then press it in MORE. That's the FULL Press.
Once you're in the camera, you can change the setting to turn it on with a HALF press of the button.
TEC
technillion said:
The Camera has a setting that turns it on with either a Half press or a Full press of the side button.
It defaults to FULL so if you're at the Today Screen for example, Press it and then press it in MORE. That's the FULL Press.
Once you're in the camera, you can change the setting to turn it on with a HALF press of the button.
TEC
Click to expand...
Click to collapse
That is a lovely feature, How many times I take my Hermes out of the puch when I get a phone call and find that teh camera is on...
then, does the camera button of the kaiser work the same way as a shutter button in a photo camera?.... half press for focus, then it's focused, you can move the subject.... then full press for making photo?
Yes, that's exactly how it works. There is a rectangle in the middle of the screen that turns green when the image is in focus. After that rectangle turns green, push the camera button down further to take the picture! Great feature as long as you have a VERY steady hand, otherwise your picture will turn out blurry.
On my Tilt, EVERY BUTTON [except left, right, up, down, and select] will cause it to WAKE-UP from sleep mode.
How can I prevent this???
I would like just the OK button to wake up my device.
Thank you
neely30188 said:
On my Tilt, EVERY BUTTON [except left, right, up, down, and select] will cause it to WAKE-UP from sleep mode.
How can I prevent this???
I would like just the OK button to wake up my device.
Thank you
Click to expand...
Click to collapse
I've never seen anything that allows this.. It's the four hard buttons (2 phone/win/ok) and power, or just the Power button.
It's in the Key Lock preference under System.
Personally I'd like it if I could do something like hit one of the four hard buttons and another button immediately after or it powers off. If I set it where all the hard buttons will turn it on I find it turned on every time I take it out of my horizontal pouch. But if it was set to some very simple key 'combination' it'd be easy to turn on myself (vs the tiny power button) but wouldn't stay on all the time in my pouch.
That is my point, either No buttons wake-up except the hard to get to power button or all buttons wake-up.
I there a registry hack that will allow the power button and one other button, maybe the OK button to wake the device up??
Hi guys, I just got my new replacement Bell Samsung galaxy S and have gotten things running on it again, but the damn thing keeps going into some weird screen capture.
What happens is that when I hit the "back" button it will go dark and the "menu" button will light up. repeatedly hitting the back button will do nothing, and hitting the menu button will do nothing. Pressing the center "home" button will take a picture of what I have displayed on the screen.
I go and check my running applications and it shows this "screen capture service" running. I stop it and then I continue on what I'm doing and it happens again, going back to the running apps and it is back.
The only way it seems I can use my "back" button is if i hit the "volume" button on the side and then both the "back" and "menu" buttons will light up, and then I have to wait until they both go dark before I can hit the "back" button and have it work. if I hit it will they are lit up it goes back into the screen capture "mode"
The phone came in the mail with I9000UGJL2, firmware 2.2.
Any advice on how to permanently kill that damn screen capture thing would be greatly appreciated because it is driving me nuts. I get a way with maybe 2 "back" button pushes where it works and then it goes into that mode
Same problem...
Samsung Galaxy S i9000 (Facinate)
It seems that by pressing the back button too quickly puts you in the Screen Capture mode...Back button dims but the Menu button stays lit. I found that if I push the Home button that take s the screen shot, then wait for both the Menu and Back button to come on and then lowlight, I can then hit the back button and continue on for a while?
Package name: com.sec.android.app.screencapture
Source: /system/app/ScreenCaptureService.apk
Please, I would like to find out more about this app in order to try and control it. It really slows moving back when you have to wait for the Menu and Back buttons to lowlight before you can hit the back button again!
Just after posting the above, I was able to Force Stop the package and I have not had a problem with the phone going into screen capture mode since.
Woohoo!
My i9100 built-in Screen Capture Service default output is png format. How can I change it to jpeg format?
Hi all,
I have got a Tytn II running on AthineOS Lite Rom,
I just wonder if it is possible to set the behaviour of the power button.
As original shipped rom, pressing power button turns into standby mode, which music players continue to work.
However,when I use this rom, whenever I try to turn the screen off + locking the keys by pressing the power button, music player just stops working.
Same to Resco Audio Recorder... When i press the power button to turn my screen off, recording would stop too
I tried Backlight Off programmes, however keys wont lock at the same time.
and I wonder if there is a way, like Reg modification to change how power button works.
Many thanks =]
cn2661 said:
Hi all,
I have got a Tytn II running on AthineOS Lite Rom,
I just wonder if it is possible to set the behaviour of the power button.
As original shipped rom, pressing power button turns into standby mode, which music players continue to work.
However,when I use this rom, whenever I try to turn the screen off + locking the keys by pressing the power button, music player just stops working.
Same to Resco Audio Recorder... When i press the power button to turn my screen off, recording would stop too
I tried Backlight Off programmes, however keys wont lock at the same time.
and I wonder if there is a way, like Reg modification to change how power button works.
Many thanks =]
Click to expand...
Click to collapse
try using AE Button Plus to replace the function button on the device
Thanks for quick responce
I am trying the little tool
however, I just manage to map a key to switch screen turning backlights off,
or lock device,
but I cant figure out how can I turn off the screen at the same time hardware keys are locked (just as how power button acts except keeping programs running while screen off)
Please advice, and thanks again mate =]
Can anybody recommend an app what puts a lock icon widget on the homescreen? My case don't allow to press power button, and button savior is too confusing for my mother.
similar Q
Howdy, pardners!
I on the other hand wonder, whether there is possibility to disable onscreen lock - my back button is hardly reachable so i am not worried that it will get pressed. Sliding the screen everytime i just what to know the time or what ever is however quite annoying. Any chance to disable only touch screen, no screensaver - just Laucher home screen with clock, calendar..., unlocking with back button or quick some combination of others?
Would be magical !
regards
In regards to the first post: have you looked in nook touch tools? There may be a way to set one of the side buttons as the power button, therefore locking it.
Good luck!
I dont know if anyone has it too but:
Go to button savior, check the box that says android recent task.(just bottom of the first page).
And everytime that i press the n button long, it goes to lockscreen. i dont know why. Also long pressing the home button on the button saviour does the same thing too.
The power button and the "n" button go to different electrical sections than the four hard side buttons
The two buttons go to dedicated input pins, the four buttons are part of a scanning matrix.
Although it might be possible to statically enable the whole matrix so that you could detect a button push without scanning (while asleep)
it seems that they would have not handled the buttons separately if that were the case.
In short, any button can be assigned to power and put the Nook to sleep.
Although I'm not sure if any button would be able to wake it?