where can i find the jl2 modem file? - Galaxy S I9000 Q&A, Help & Troubleshooting

i tried searching but no luck, i know is somewhere on this forum.
can anyone plz help? thanks so much.
looking for the JL2 modem file.

I have attached it for you!

htp1498 said:
i tried searching but no luck, i know is somewhere on this forum.
can anyone plz help? thanks so much.
looking for the JL2 modem file.
Click to expand...
Click to collapse
If you have CWM, you can use the following: http://forum.xda-developers.com/showpost.php?p=10188028&postcount=177
If you don't. Check the sticky for the stock JL2 firmware, unzip it and you'll find the JL2 modem in there.

rmanaudio said:
I have attached it for you!
Click to expand...
Click to collapse
thanks already.
just to confirm, this is the cwm zip version or the odin version?

htp1498 said:
thanks already.
just to confirm, this is the cwm zip version or the odin version?
Click to expand...
Click to collapse
He gave you the Odin version. I gave you the CWM version.

just a newbie question.
I want the JL2 modem too, thanks.
I am going the ODIN way. so I guess I just leave the PIT empty, without re-partition and just put the modem file in PHONE seciton and press start? or I need to flash with the PDA i m using right now too? sorry for the question. I am on JPJ now and wanna get back JL2 to get my 850 WCDMA signal back.

Yes, that'll work fine. Just tick modem, choose the file and flash it.
Sent from my GT-I9000 using XDA Premium App

Related

Help Please

I have a Bell Galaxy S running docmod"s rom. All of a sudden my phone shut off and now will only display the white "Galaxy S GT-I9000M" screen in a continuous two second loop. I can get into download mode and have tried using odin to restore Bell's firmware but it doesn't correct the problem. I've also tried searching and haven't come across anything to help. Is there anything I can do or is it bricked?
Thanks
you need a 3 file firmware, add a 512 pit, finish with ticking the re-partition box,
job done !!
Thanks! Do you have a link to the ones I would need? Sorry, I've tried looking but I'm a newb!
Im not sure which comes in a 3 file firmware, im not familiar with the I9000-M << i dont want to tell you to flash the wrong firmware.
http://www.theandroidsoul.com/ezbase-ezrom-for-android-2-2-install-revert-back/ <<< this is the one you want
http://www.samfirmware.com/WEBPROTECT-i9000.htm
http://forum.xda-developers.com/showthread.php?t=846913
you may also want to try this in future
http://forum.xda-developers.com/showthread.php?t=991792
azzledazzle said:
Im not sure which comes in a 3 file firmware, im not familiar with the I9000-M << i dont want to tell you to flash the wrong firmware.
http://www.theandroidsoul.com/ezbase-ezrom-for-android-2-2-install-revert-back/ <<< this is the one you want
http://www.samfirmware.com/WEBPROTECT-i9000.htm
http://forum.xda-developers.com/showthread.php?t=846913
you may also want to try this in future
http://forum.xda-developers.com/showthread.php?t=991792
Click to expand...
Click to collapse
Thanks very much for your help. I'll try those out.
namams said:
Thanks! Do you have a link to the ones I would need? Sorry, I've tried looking but I'm a newb!
Click to expand...
Click to collapse
If you don't found another issue...
Look this post i already this prob i think
http://forum.xda-developers.com/showthread.php?t=881551
[Q] Can't get into Clockworkmod (i9000m)
I explain how i do it with my bell canada
Sent from my GT-I9000M (Bell Mobility - Canada) using XDA Premium App

Call drop issues

I just flashed my captivate the other day to 2.3.3
kernel version 2.6.35.7-I897uckf1-CL273832
build gingerbread.uckf1
baseband I9000UGJL2
for some reason everytime i get a call it rings once then i lose all signal and it sends the caller to vm. I know its a modem issue and i have searched high and low. can someone please give me the steps to fix this issue please.
EDIT: I did a factory reset and it fixed the issue but When I answer calls now or make outgoing I cannot hear anything through the phone and through the speaker. PLEASE HELP
U need to install an i897 modem instead of the i9000 u have. Modems and Kernels have to be matched... i897/i897 and i9000/i9000.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Flash KF1, KE3, or KB1 modem.
See Modem Stickied Thread attatchment paperclip at the Title of the thread to find these.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
im sorry im a newb. can you send me a link to the modem i would need to download and flash with odin? and instructions if possible thank you.
SHIFTY666 said:
im sorry im a newb. can you send me a link to the modem i would need to download and flash with odin? and instructions if possible thank you.
Click to expand...
Click to collapse
Modem Stickied Thread Link U will have to back out to the Title of the Thread to see the modems that are behind the paperclip. Try the cwm3 uckf1. U can download it and extract the "modem.bin" out of it and open Odin3 v1.81 and place the modem.bin in the Phone slot and having already connected ur phone in download mode, hit start. Then u should be good to go.
View attachment 693540
so i found the KF1.zip and the KE3.zip and put them in the root of the phone and tried to do them with CWM and i keep getting an error during insall. any other suggestions or links to get the file so i can use odin to do it or any other trick to get back to stock modem just to get it working again.
sorry posted i guess same time as you lol. i still dont see that file on that page and dont know what paperclip you are talking about?
i see a uckb1 but not the one you said. can you email me the file please im at [email protected] thanks for the help
Paperclip at [Modems] Thread
If u want to go back to Stock i897uckf1 Gingerbread, use the last link below in my signature.
found the paperclip. sorry about that. do you load it under phone in odin the modem. bin file?
SHIFTY666 said:
found the paperclip. sorry about that. do you load it under phone in odin the modem. bin file?
Click to expand...
Click to collapse
Flash using CWM.
^^ yes... and that should get u back to good.
i think i fixed it all now. Thank you for all your help.
all good think its all fixed now!!!! thanks guys
Good deal. And glad to help.
welll new issue now heh. so i restored all my apps from TB and they all went back in fine. but now its doing the ring once and go to VM again. what could be causing this??

[Q] P1000 Brick

Sorry for the long thread but please read and help me !
Sorry moderators i tried looking for my post didnt find where you placed it. so making a new and clear where i'll tell what i ve done to my tablet.
firstly my p1000 was froyo 2.2 and i didnt checked that and tried to upgrade it to jelly bean, that was the first stupidity of my.
while doing that i faced many problems and concluded that it was brick.
how ever i had rooted my phone with super one click root..
later when it was bricked i again rooted it with cwm recovery by help of cmd.
then it was more complex, i then tried to roll it back and installed the firmware but the firmware i installed was wrong region again it went more complex.
then from some thread, i again used odin and pit it and installed some other firmware. that didnt work so i did something with heimdall suite as it was instructed and mess something with zImage thing.. all failed.
now i ve finally came up with no solution and thinking what the mess i ve done.
please help me.
now odin dont recognize the phone.
the phone is booting till the samsung welcome screen i can also listen the sound.
it also goes to cwm recovery screen and also goes to downloading screen.
please tell me a way so that it can go to normal i am happy with 2.2 froyo only.
tell me a way, please give me download links so that i dont mess it again.
remember odin not accepting it, i ve charged the phone fully and also installed the samsung usb drivers but its not helping..
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
yes, i am sure it is because of heimdall suite,..
thanks a lot you are so helping i will be posting here only now
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
AvRS said:
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
Click to expand...
Click to collapse
i am really really sorry for all the inconvenience ,
i was a bit shocked as my tablet got bricked, so made such silly posts and created the problems.
but thanks for understanding my conditions.
priyana said:
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
i would like to give you a big big big thanks for helping me out..
this forum is the best forum over the web as i got my problem solved,
not only helped me to unbrick my tablet but also now its upgraded to 4.1 jelly beans.
Priyana without you my tablet would be ended with a hard brick.
Thanks a lot.
No network !!
after all the hard work and all flashing thing, i upgraded it to Android 4.1.1 Jelly Bean via CyanogenMod 10
but now the problem is i cant find the network ..
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
glussier said:
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
Click to expand...
Click to collapse
i am sorry for not being clear, i was talking about the mobile network.
i searched on forum, and what i understand is i have to copy modem.bin file to data/vendor.
but i dont know which modem file to copy.
You can extract modem.bin from the rom that you have downloaded.
uryv
glussier said:
You can extract modem.bin from the rom that you have downloaded.
Click to expand...
Click to collapse
i did that... but still not able to make any calls. my sim card is working on other phone though.
have tried flashing modem.bin and also tried copy and paste in vendor folder.
but its not working searching all over the forum but i dont know what to do
Settings>about tablet>Status> Service state : out of service / Mobile network state : disconnected / MDN : unknown
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
priyana said:
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
in gb stock safe, it was jpz modem file.. which i used to flash and it was flashed very well and there was no problem in anything.
later on when i upgraded for 4.1.1 it was also installed normally with no problem the only problem i encountered is i cant make any calls from it.
even the imei number is changed of my phone.
i also sticked the file in system/vendor .. i tried with the both file the jpz which i had from gb stock file and another from the firmware.
well now i trying to go for the latest cyanogen 4.1.1 hope everything get normal in it, and try to stick file in radio.
can you tell me particularly which file to copy and where ?
in gb stock jpz worked fine.. should i go for it ?
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
priyana said:
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
Click to expand...
Click to collapse
hmm yea you were right.. and it was stupid of me i was using a old version cyanogen.. it downloaded the latest nightly and it worked fine..
but i think something google apps that.. the apps are limited as earlier i used to keep on scrolling and the apps list was like infinite now it seems as there are just 200 apps in it..
give me a link of latest gapps file plzz
Gapps only a few apps in it.
http://goo.im/gapps
Choose correctly, ics or jb.
Sent from my GT-P1000 using xda app-developers app

[Q] No Display after installing a wrong stock firmware

Good Day
Sorry I know this is stupid of me but I just messed up. I kinda installed the wrong stock firmware on my GT-N7000, recovery mode is still accessible and it still boots (somehow), so as what I have read, I can still fix it by loading the correct firmware for it, and so I managed to install XXLSZ update for GT-N7000 hoping that it would fix the problem (and I did not), recovery can still be accessed (but no display) and I can still switch to download mode (and as what I assume, there is still hope).
I tried to search for correct infos in my case but I just do not know what to do anymore (and these anxiety attacks are really painful).
Sorry for being incompetent but would somebody be able to help me on getting out of my problem?
Thank you very much.
P.S.
I do not know if this is a sort of brick but it might be a software problem
I AM GOING CURAZEH!
Install a JB stock Rom with PC Odin.
Sent from my GT-N7000 using xda premium
ThaiDai said:
Install a JB stock Rom with PC Odin.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sorry but I installed the following:
N7000XXLSZ_N7000XXLSO_N7000ITVLS4_HOME.tar.md5
Twice or thrice but no effect, screen is still black(screen doesnt have a single ray of light in it!)
Can you recommend me any steps or should I download a different stock firmware?
P.S.
Download mode is still responsive.
RYUU23 said:
Sorry but I installed the following:
N7000XXLSZ_N7000XXLSO_N7000ITVLS4_HOME.tar.md5
Twice or thrice but no effect, screen is still black(screen doesnt have a single ray of light in it!)
Can you recommend me any steps or should I download a different stock firmware?
P.S.
Download mode is still responsive.
Click to expand...
Click to collapse
Instead of a JB ROM, try a stock GB ROM.
Instead of using 1 file flashing...
try 5 files flashing method http://forum.xda-developers.com/showthread.php?t=1424997
warfareonly said:
Instead of a JB ROM, try a stock GB ROM.
Click to expand...
Click to collapse
I will try that now
Didn't work
alvinhaw said:
Instead of using 1 file flashing...
try 5 files flashing method http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
I do not specifically understand the purpose of being linked to the thread, it contained the same JB rom i downloaded.
Edit: I think I found out how that works, ill give it a try asap.
Edit2. nope it did not work
How are you flashing these ROM?
Sent from my GT-N7000 using Tapatalk 2
salilpune1 said:
How are you flashing these ROM?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
With ODIN?
Download mode > put file on PDA > start
Am I missing a procedure ?
try a stock rom which has bootloader included like the stock XXLSZ german rom.. check if the rom you flashed earlier has a sbl file in it. open the md5 file using 7z and you can check.
what wrong rom did you flash?
nokiamodeln91 said:
try a stock rom which has bootloader included like the stock XXLSZ german rom.. check if the rom you flashed earlier has a sbl file in it. open the md5 file using 7z and you can check.
what wrong rom did you flash?
Click to expand...
Click to collapse
I flashed I9100XWLSD I9100XXLS8 by mistake, the rom that I flashed dos not hav an sbl file in it too.
try flashing XXLSZ DBT rom with sbl.. also use original PIT file as well while flashing
May I know where can I get a .PIT file?
http://forum.xda-developers.com/showthread.php?t=1424997
It worked!! Thanks a lot!!:crying:
still crying? Your display is back?
nokiamodeln91 said:
still crying? Your display is back?
Click to expand...
Click to collapse
Manly tears of joy, it is back.
Thank you ; problem solved

[Q] Problem on Startup

Hi, ive ran into a problem on the Note n7000 where when i start it up it shows the picture attached. and just keeps flashing that on and off the screen. i cant get into the phone to do anything. download mode works but recovery doesnt. if anyone can help it would be greatly appreciated.
i cant link the picture but its of a android icon (with blue hex shape in center) and blue line below it.
Gooiesc said:
Hi, ive ran into a problem on the Note n7000 where when i start it up it shows the picture attached. and just keeps flashing that on and off the screen. i cant get into the phone to do anything. download mode works but recovery doesnt. if anyone can help it would be greatly appreciated.
i cant link the picture but its of a android icon (with blue hex shape in center) and blue line below it.
Click to expand...
Click to collapse
Which ROM were you on? were you trying to upgrade maybe, give a little history. make sure you put your phone into charging now, as this trip could be long.
treacherous_hawk said:
Which ROM were you on? were you trying to upgrade maybe, give a little history. make sure you put your phone into charging now, as this trip could be long.
Click to expand...
Click to collapse
the phone was stock and a problem similar occured where the startup screen would keep flashing. i then rooted it with odin. im sorry i dont remember the Rom it was just a basic one.
Im wondering if any Rom is out there to just restore it. using Odin PC
also before when it first had the problem if i took the battery out and started it up it would work then freeze and do the same problem. now i cant get into the phone at all.
i believe my brother tried to update it(its is phone.) and thats when this happened.
Gooiesc said:
the phone was stock and a problem similar occured where the startup screen would keep flashing. i then rooted it with odin. im sorry i dont remember the Rom it was just a basic one.
Im wondering if any Rom is out there to just restore it. using Odin PC
also before when it first had the problem if i took the battery out and started it up it would work then freeze and do the same problem. now i cant get into the phone at all.
i believe my brother tried to update it(its is phone.) and thats when this happened.
Click to expand...
Click to collapse
download stock rom for your country or any other country from here:
http://forum.xda-developers.com/showthread.php?t=1424997
only if you do not want to backup anything.
Make sure you phone is charged enough. Put the phone into download mode and flash the downloaded file. Same link also has method for how to flash.
treacherous_hawk said:
download stock rom for your country or any other country from here:
http://forum.xda-developers.com/showthread.php?t=1424997
only if you do not want to backup anything.
Make sure you phone is charged enough. Put the phone into download mode and flash the downloaded file. Same link also has method for how to flash.
Click to expand...
Click to collapse
ok just wondering. there is no ROM here for Canada? what should i use/
Gooiesc said:
ok just wondering. there is no ROM here for Canada? what should i use/
Click to expand...
Click to collapse
is it international N7000 or Carrier locked?
treacherous_hawk said:
is it international N7000 or Carrier locked?
Click to expand...
Click to collapse
its unlocked. i believe(99% sure) otherwise its Bell
Gooiesc said:
its unlocked. i believe(99% sure) otherwise its Bell
Click to expand...
Click to collapse
then you can choose any rom and flash..
treacherous_hawk said:
then you can choose any rom and flash..
Click to expand...
Click to collapse
im a little confused. can you tell me which to download exactly? ssn is N7000GSMH i dont want to mess it up.
Also how do i flash the ROM i cant find a .tar file
Gooiesc said:
im a little confused. can you tell me which to download exactly? ssn is N7000GSMH i dont want to mess it up.
Also how do i flash the ROM i cant find a .tar file
Click to expand...
Click to collapse
download for any country latest being for the month of April. Germany may be or US. and it is a zip file, after you download extract it and there be a tar.md5 or tar file. the whole process is mentioned in the same link i mentioned before.
treacherous_hawk said:
download for any country latest being for the month of April. Germany may be or US. and it is a zip file, after you download extract it and there be a tar.md5 or tar file. the whole process is mentioned in the same link i mentioned before.
Click to expand...
Click to collapse
it says this on the post you sent.
- Download ROM, and extract it to .tar file
do i save the whole archived file as .tar? still downloading the germany file. but i had downloaded other custom roms and none have a .tar file in them. if so how do i do it?
Gooiesc said:
it says this on the post you sent.
- Download ROM, and extract it to .tar file
do i save the whole archived file as .tar? still downloading the germany file. but i had downloaded other custom roms and none have a .tar file in them. if so how do i do it?
Click to expand...
Click to collapse
use winrar or 7 zip. Right click on the zip file, go to extract files and you should have .tar file. Open Odin and click on PDA and browse to the .tar file. The custom roms are CWM Flashable so they are zip files only.
treacherous_hawk said:
use winrar or 7 zip. Right click on the zip file, go to extract files and you should have .tar file. Open Odin and click on PDA and browse to the .tar file. The custom roms are CWM Flashable so they are zip files only.
Click to expand...
Click to collapse
thanks for helping me fix it. its all done now.

Categories

Resources