[Q] Just some newbie questions - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello,
I know, that professionals usually don't like these questions but I really want to know sth:
I recently installed Froyo 2.2.1 with Kies Reg Patcher and it works GREAT! The only thing that matters is the old RFS file System.
So I decided to install the Voodoo lagfix.
I put the update.zip in my root/sdcard and tried the following:
1. I started the DOWNLOAD Mode - but only the yellow shield appeared - nothing happened as expected (maybe nothing to download?)
2. I started the RECOVERY Mode and selected "Apply update.zip". ==> It was telling me after 2 seconds "Error ... unsigned ..."
==> I knew this is caused by the new recovery assistent. After all I rebootet my phone and every thing works like it was before.
Now the questions:
1. Is my system unchanged? I mean has the update.zip file copied some files until it aborded?
2. Is it bad when I turn my phone in Download mode? I mean it didn't flash/download anything - so does it really damage my phone when I press the power key 5 sec and restart my phone (ONLY IN THIS SITUATION - I know that pressing it during an update process/by appearance of the status bar can damage the phone).
Please give me some answears!
PS: By the way, on woodoo-project.org it is written that the update.zip mode "...works with clockworkmod" - what is this for a mod? I googled but I only found variations about it - not a documentation and their website seems o be down.
Has this mod automatically been installed before the "Unsigned Error" came?
LG,
Dennis

In order to have your phone lag fixed, you need to root the phone (root: complete system access of your phone).
1. In download mode the phone wont update anything on its own. You need to use odin for flashing (installing) through the computer.
2. In froyo 2.2.1 you have a 3e recovery (which only updates with signed apk's) - your update.zip file is custom hence its unsigned.
about your q's
1. Your system has not been changed as the process was aborted (no files are copied or changed)
2. Its completely safe to restart you phone in download mode if you aren't flashing anything.
Note: In order to use voodoo lagfix you need to get 2e recovery for flashing custom unsigned apk's. This can be done by using CF root method (this will root your phone and also install ClockWorkMod - CWM). CWM will allow you to install the update.zip.
*For more info. just check the thread about rooting/lagfix etc. to get step by step instructions.

Thank You very much! Now I get it!

Related

G1 - Recovery mode Exclamation Mark Screen

1. I had a rooted phone with CyanogenMod 4.1.9999
2. I downloaded Original System Image (signed-dream_devphone_userdebug-img-14721.zip) from http://developer.htc.com/adp.html
3. I updated the phone with the zip file
Now I'm getting an exclamation screen when I try to get into recovery scree (Pressing Home button during boot)
I tried to downgraded using RC29 Image: http://android-roms.googlecode.com/files/DREAIMG-RC29.zip - Followed first 6 steps from http://forums.tmonews.com/index.php?topic=8970.0
I'm not able to update or do anything with the phone now.
PLEASE HELP!!!!
my guess would 2 be push alt+l and a list of options will come up! Also dont use the system image from htc.com use the recovery image 2 go back 2 whatever version you want it 2... make sure u wipe before you downgrade/upgrade
please move
sorry to be the one to point this out...but please ask these questions in the q&a section as it is not development related
garok89 said:
sorry to be the one to point this out...but please ask these questions in the q&a section as it is not development related
Click to expand...
Click to collapse
I'm sorry for posting it here. I'm not able to move it to Q&A section. If there is an option, please let me know how.
law_ren_ce said:
my guess would 2 be push alt+l and a list of options will come up! Also dont use the system image from htc.com use the recovery image 2 go back 2 whatever version you want it 2... make sure u wipe before you downgrade/upgrade
Click to expand...
Click to collapse
Thanks law_ren.
I get 3 options when i press Alt+L
1. Alt+L Toggle log text display
2. Alt+S apply sdcard:update.zip
3. Alt+W Wipe Data/factory reset
I renamed the android 1.6 system image to update.zip
[snap]
Verifying update package...
E:No signature (5 Files)
E:Verification failed
hifake said:
Thanks law_ren.
I get 3 options when i press Alt+L
1. Alt+L Toggle log text display
2. Alt+S apply sdcard:update.zip
3. Alt+W Wipe Data/factory reset
I renamed the android 1.6 system image to update.zip
[snap]
Verifying update package...
E:No signature (5 Files)
E:Verification failed
Click to expand...
Click to collapse
The same happens with recovery image signed-dream_devphone_userdebug-ota-14721.zip
I say flash another recovery.img via fastboot.
Hi I have a problem like you....my G1 load only in recovery mode(Hold power=recovery, hold home+power=recovery, camera+power=recovery)
Did you fix your G1??? Please help me fix it
EvGeNN2007 said:
Hi I have a problem like you....my G1 load only in recovery mode(Hold power=recovery, hold home+power=recovery, camera+power=recovery)
Did you fix your G1??? Please help me fix it
Click to expand...
Click to collapse
I haven't fixed it yet. Am not able to place the recovery image using fastboot - my phone is not recognized by the computer
Work around I've found for flashing the recovery image if you can't figure out fastboot (I've never got it to work) is like this:
1. Follow the root procedure.
2. Install the most recent CM rom without using the HTC image (reason I do this is he's got some linux commands built into his ROM that aren't installed in the vanilla android build).
3. Download the cm-recovery-1.4.img to your sd card (or whichever recovery image you like)
4. Run terminal commands like so:
$su root (the reason I do this is it gives you higher level access to the system than just su, and I've found it doesn't work with just su for some reason)
#flash recovery /sdcard/cm-recovery-1.4.img
#reboot
5. Hold your home key as it powers up, and you should have the new recovery image installed.
Of course, I'd say do a full wipe, then install the ROM, and go through the fix permissions and clear cache.
JonnyFlash said:
Work around I've found for flashing the recovery image if you can't figure out fastboot (I've never got it to work) is like this:
1. Follow the root procedure.
2. Install the most recent CM rom without using the HTC image (reason I do this is he's got some linux commands built into his ROM that aren't installed in the vanilla android build).
3. Download the cm-recovery-1.4.img to your sd card (or whichever recovery image you like)
4. Run terminal commands like so:
$su root (the reason I do this is it gives you higher level access to the system than just su, and I've found it doesn't work with just su for some reason)
#flash recovery /sdcard/cm-recovery-1.4.img
#reboot
5. Hold your home key as it powers up, and you should have the new recovery image installed.
Of course, I'd say do a full wipe, then install the ROM, and go through the fix permissions and clear cache.
Click to expand...
Click to collapse
Am not even able to access terminal. I get the following 3 options only
1. Alt+L Toggle log text display
2. Alt+S apply sdcard:update.zip
3. Alt+W Wipe Data/factory reset
hifake said:
Am not even able to access terminal. I get the following 3 options only
1. Alt+L Toggle log text display
2. Alt+S apply sdcard:update.zip
3. Alt+W Wipe Data/factory reset
Click to expand...
Click to collapse
You won't be able to use terminal from recovery until you have a thirdparty recovery image installed. The steps I've listed are for a working phone, and I'm sure that's where part of your problem is. I'd suggest doing a wipe (Alt+W) and going through the root process again. When you get the CM Rom, change the name of it to update.zip, then try the steps I mentioned. I'd suggest having a separate SD card with just DREAMIMG.nbh installed on it for emergencies (especially if you're going to partition your main card).
Thanks
2) Install the most recent CM rom without using the HTC image(What is it? Can explane?)
4) Terminal as i understand its Telnet?
Can i do works a boot mode and then downgrade it to RC29?? Because after it i'll know what to do... Thanks!
EvGeNN2007 said:
Thanks
2) Install the most recent CM rom without using the HTC image(What is it? Can explane?)
4) Terminal as i understand its Telnet?
Can i do works a boot mode and then downgrade it to RC29?? Because after it i'll know what to do... Thanks!
Click to expand...
Click to collapse
Basically to get this working you're going to need to downgrade to RC29 first - so follow the root instructions.
CM = CyanogenMod ROM. To get his working fully you need two roms, which are the HTC Developer ROM and the 4.x ROMs he created (reason being legal distribution of software), but for my instructions, on his ROM page, you're going to skip his instructions, just download his ROM, rename it to update.zip and just flash it from the stock recovery, just so you can get to the terminal once the phone boots up and load terminal (it's in the programs tray). When another screen pops up asking if you want to allow it to use SU functions (it will as soon as you type "su") hit allow.
Terminal is a program downloadable from the Market, it's included with the CM ROM.
His instructions for install are not going to work unless you have a thirdparty recovery image, which at this point from the description, the triangle with the exclamation point is the default system recovery image.
CM Rom page
You should be able to find the Root posts and choose a customed recovery image, there's about 4 or 5 really good ones, I use Cyanogen's, thus my instructions on how to flash it.
You're fortunate that you're getting to the stock recovery, means your phone isn't bricked.
JonnyFlash said:
You won't be able to use terminal from recovery until you have a thirdparty recovery image installed. The steps I've listed are for a working phone, and I'm sure that's where part of your problem is. I'd suggest doing a wipe (Alt+W) and going through the root process again. When you get the CM Rom, change the name of it to update.zip, then try the steps I mentioned. I'd suggest having a separate SD card with just DREAMIMG.nbh installed on it for emergencies (especially if you're going to partition your main card).
Click to expand...
Click to collapse
I have successfully installed RC 29
FW 1.0
Baseband 62.33.20.08H_1.22.12.29
Kernel: 2.6.25-01843-gfea26b0
Build: kila-user 1.0 TC4-RC29 115247
But Am not able to download telnet (or any other app) from market. I have tried several times with wifi & Cell data .
hifake said:
I have successfully installed RC 29
FW 1.0
Baseband 62.33.20.08H_1.22.12.29
Kernel: 2.6.25-01843-gfea26b0
Build: kila-user 1.0 TC4-RC29 115247
But Am not able to download telnet (or any other app) from market. I have tried several times with wifi & Cell data .
Click to expand...
Click to collapse
Not sure what you mean? Telnet for these intents and purposes is basically just a command. The page on how to root has become pretty convoluted at this point. The part where it tells you to type 'telnetd' is just running a script which is an exploit in the old releases of android. You won't be messing with Terminal really until you get to the point where you've updated the rom. From this point, I'd suggest downloading this root.apk from your browser, install it, allow it, follow the instructions step by step in the program.
My problem consist of that i can't turn on my phone and i can't get into bootloader...only recovery can you give me a link for RC29 download and then install it from recovery on my g1 from recovery.
Thanks!
EvGeNN2007 said:
My problem consist of that i can't turn on my phone and i can't get into bootloader...only recovery can you give me a link for RC29 download and then install it on my g1 from recovery.
Thanks!
Click to expand...
Click to collapse
You're probably going to need a card reader...here's the instruction for rooting with a download for the RC29.
http://forum.xda-developers.com/showthread.php?t=442480
I know all this steps but i Tell that i CAN'T get into boot mode and in boot downgrade from DREAMIMG.nbh to RC29... In that All my problem...
How can i flash to RC29 from Recovery Mode?
EvGeNN2007 said:
I know all this steps but i Tell that i CAN'T get into boot mode and in boot downgrade from DREAMIMG.nbh to RC29... In that All my problem...
How can i flash to RC29 from Recovery Mode?
Click to expand...
Click to collapse
You don't...with the DREAMIMG.nbh or any .nbh file you start up the phone holding power+camera. The recovery mode looks for an update.img file. You'll make it through, don't get frustrated.
Here's a more updated rooting guide:
http://forum.xda-developers.com/showthread.php?t=553416

[FIXED] [Q] help! Trying to upgrade android 2.1 to 2.2 on Optus SGS

Hi all,
I'm a beginner to this stuff, so please bear with me. I've gotten an SGS from Optus here in Australia, with Android 2.1. I want to upgrade to 2.2, so here I am on these forums
I confirmed that there was no 3-button combo mode on this SGS, and have successfully installed the fix as detailed here: http://forum.xda-developers.com/showthread.php?t=785201 (a much more painful process than I thought, having to get a hold of a Windows computer (wasn't comfortable using Windows in a VM to flash my phone, couldn't figure out how to get the 3-button on my SGS with Hiemdall), get the USB drivers from the Android SDK, install Java, stab self with spoon, etc)
Now I've gotten the 3-button combo on the phone, I have read through the FAQ thread (http://forum.xda-developers.com/showthread.php?t=723596) and the thread on the newest ROM(?) Doc BUJP8 (http://forum.xda-developers.com/showthread.php?t=817703).
Bearing in mind that I have never done this before, what the heck do I do next? I tried putting the BUJP8 file (BUJP8_Doc_V9.zip, renamed to update.zip) on the phone storage in a folder titled 'sdcard', rebooted with ADB and got told that the phone couldn't extract the update.zip file. Is that correct? Do I need any other files to update my phone from 2.1 to 2.2?
Edit: The phone tells me "E:Can't open /sdcard/update.zip (No such file or directory) Installation aborted."
I'm rather frustrated and grumpy I know that I'm missing something, so if you can please let me know what to do next, that would be excellent!
From the threads installation instructions. This rom works fine on Optus (I'm using it as well) with Dark Theme.
BTW, don't rename the Doc ROM to update.zip. You need to use the clockwork file as update.zip (see below)
Good luck
Installation Steps (Read this very carefully!)
01. Download the ROM (which you seem to already have downloaded) and put it on your internal sdcard.
02. Download clockworkmod recovery from here: http://koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.1.2-galaxys.zip
You *need* Clockworkmod, this won’t work with stock recovery.
03. Rename the clockworkmod recovery file to “update.zip” and put it on your internal sdcard.
*SKIP THIS STEP AS YOU'RE COMING FROM AN OFFICIAL OPTUS ROM WITH NO TWEAKS*
04. If you had Voodoo installed prior to installing this ROM (Eclair or Froyo), make sure you still have the "disable lagfix" folder inside "/sdcard/Voodoo". If you’re coming from sztupy’s kernel, make sure you have disabled all Lagfixes from CWM.
05. Shutdown phone, wait for it to power down, then boot the phone into recovery mode (press volume up, keep it pressed, then press home button, keep it pressed, then press power button, keep it pressed until you see the Galaxy S screen. Release all three buttons when you see it).
06. Select “apply sdcard:update.zip” (use volume rocker to move up and down, and home button to select). Clockworkmod recovery will boot now (you may have to do apply update.zip twice for Clockworkmod to show up).
07. Once in Clockworkmod, select “install zip from sdcard” (use volume rocker to move up and down and the back button to select).
08. Select “choose zip from sdcard” and then select the ROM zip package. Then choose yes.
09. The update will start (will take some 5 minutes) and during the flashing you will see some strange big characters on the screen, don’t worry, that’s normal. After the process finishes, you will be dropped back into Clockworkmod recovery. From there, choose go back, and then reboot phone.
10. The first boot will take some time as the ROM will deodex
11. After the phone boots up, shutdown phone again, and then boot into recovery. The phone will boot DIRECTLY into Clockworkmod. From there, select "advanced ULK features", then "Lagfix options". You can select any of the lagfix schemes (description here). I recommend NO-RFS advanced EXT4 (others are known to have issues and may cause loss of data)
Click to expand...
Click to collapse
Woot! All working now The trick I hadn't worked out from all the instructions was to put the update.zip file in the root of the phone storage as seen by Windows, as it wasn't clear if I should have created a folder called 'sdcard' and putting update.zip there or not.
So once I worked out that putting update.zip in the root of the phone storage was the correct thing to do, I could finally get the recovery mode and have the phone successfully see 'update.zip'!
The phone has booted, and I've shut it down and gone back to clockwork, but there isn't a 'NO-RFS advanced EXT4' option for lagfix - the closest is 'NO-RFS advanced (a=e4)' - is this the EXT4 option, just badly rendered?
daehenoc said:
The phone has booted, and I've shut it down and gone back to clockwork, but there isn't a 'NO-RFS advanced EXT4' option for lagfix - the closest is 'NO-RFS advanced (a=e4)' - is this the EXT4 option, just badly rendered?
Click to expand...
Click to collapse
Good to hear you got it sorted.
And yes. That's the right EXT4 option
try this
http://webtrickz.com/how-to-update-...oid-2-2-froyo-via-kies-anywhere-in-the-world/
I did

[A] How to go into recovery mode / Flash rom

I currently have a bell Samsung galaxy s ( I-9000 ) and after I updated to 2.2 JL2 I was unable to root my phone or install programs from recovery but after a long time of fooling around I was able to figure out what works.
------
Disclaimer : This is what worked for me on my SGS, do this at your own risk and make sure you follow the instructions in order
------
******
Before you do ANY of this test that you can get into download mode and recovery mode.
Test recovery:
When the phone is off push Volume up, Home (middle button in the bottom) and then power and the same time when the boot screen comes up, let go.
Test download
When the phone is off push Volume down, Home (middle button in the bottom) and then power and the same time when the boot screen comes up, let go.
If at any time you mess up your phone, enter download mode and flash the old rom back on the phone via odin3 which is at the bottom
*****
1) Turn on USB debugging
Unplug USB -> Settings -> Development -> check USB debugging -> plug in USB
2) Root phone
Download : http://forum.xda-developers.com/showthread.php?t=803682
unzip in a folder -> run SuperOneClick.exe -> click root
3) Install modified 3e recovery (allows unsigned installs)
Download : http://forum.xda-developers.com/showthread.php?t=833423
unzip in a folder -> run install.bat -> reboot phone
------
you can stop here if that is all you want to do on this rom - if you want to install a custom rom feel free to follow along the rest of the steps
------
4) Install Clockworkmod
Go into the market -> search for clockworkmod -> download ROM Manager
5) Install CWM Recovery
Open Rom Manager -> click "Flash CWM Recovery"
6) Download rom
Put the rom you wish to flash and put it in the "internal" SD (the 16GB one, not the microSD one you can put in yourself)
7) Boot into Recovery
Volume up + Home + Power wait till the logo comes up and let go
Select reinstall packages (I believe it is called) and you might have to do it twice and you will boot into CWM recovery
8) CWM Recovery
choose to flash rom from SD and accept it and you are done.
--
Questions
I will try to answer any questions that I had during my search to the best of my knowledge, i might be off the mark a bit but close enough to get the idea.
What is to root?
Rooting gives your phone access to the system files and allows you to make changes to them, meaning the phone can be damaged if something changed something important but also gives you freedom to change things like install custom rom. It is a good idea to unroot the phone if you are not doing any changes to it or don't want to mess stuff up.
What is recovery or 3e recovery?
Recovery is a way of loading certain programs directly into the phone, the file to do this is called "update.zip". Once booted into recovery you can tell the phone to install the file.
The issue is that the old version 2e allowed unsigned programs (meaning any program could be installed) but 3e allowed only signed programs to be installed so it would not let us install programs like CWM to flash a rom.
SOo in short the 3e modification lets us install unsigned programs like 2e did.
What is Rom Manager / ClockworkMod?
It is a program to flash a rom on the phone, the rom manager is booted in via 3e recovery.
Does it matter which Rom version I install?
Not really the last 3 letters ( JYP / JL2 ) are just version numbers and you can flash any rom that in within your product, soo i would just suggest keeping within any the roms in this thread : http://forum.xda-developers.com/forumdisplay.php?f=665
Extra files
Odin3 : http://forum.xda-developers.com/attachment.php?attachmentid=405389&d=1285090568
Samsung firmware : http://www.samfirmware.com/ (can login with Gmail account)

[Q] A problem trying to flash PA

I have an N7000 with stock gb and stock KK2 kernel.
I followed these instructions from Dr. Ketans to root my galaxy note n7000: http://forum.xda-developers.com/showthread.php?t=1329360
Then I verified that it was indeed routed by downloading an app the claimed to check this. All seems ok so far.
Then I downloaded paranoid_note_v04a.zip & gapps-ics-20120511-fixed.zip
I'm pretty sure my download was ok since they will extract without errors.
Then I copied these two files to the note - in the DCIM folder (for lack of a better place to put it). I had to turn off usb debugging first, otherwise I couldn't do the copy of these two files.
Then I turned usb debugging back on again
Then I held the 3 buttons, got into "Android system recovery (3e)" and tried to flash the PA 04a. I quickly get the following error: E:signature verification failed
Do you know what I have done wrong?
I have a sneaking suspicion it's because I don't have something called CWM (although the routing instructions I was following never said I needed it).
If that's the answer, now that I'm routed what is the easiest way to get it.
Thanks
~Paul
if you have rooted your gn then download the cwm recovery in the link and put it in your external sd card go into your stock recovery (holding volume up + home + power buton) from there choose the second option i.e. apply update from sd card and navigate to where you have placed the downloaded cwm recovery and open it now you will be able to use cwm recovery and flash any rom without any error
http://forum.xda-developers.com/attachment.php?attachmentid=1056408&d=1336826886
As above you need cwm recovery to install paranoid.
Sent from my GT-N7000 using xda premium

Boot loop problem

Hello,
I tried installing a custom ROM on my 7310 and it had issues. I have tried installing the original ICS from the sammyfirmware site using ODIN. Now I have a boot loop. I think I need to repartition, but when I click the repartition checkbox in ODIN I get an error.
Do I need to repartition? If so, how do I do it? If not, how do I fix this error?
Thanks.
A few questions:
spazlon said:
I tried installing a custom ROM on my 7310 and it had issues.
Click to expand...
Click to collapse
What did you try to flash and how did you try doing it (CWM, ODIN, ...)?
What 'issues'?
I have tried installing the original ICS from the sammyfirmware site using ODIN. Now I have a boot loop.
Click to expand...
Click to collapse
How far into the boot sequence does it get?
Are you able to get into recovery?
If so, what recovery do you have (Stock vs CWM)?
Have you tried seeing what is causing the boot-loop using adb?
Do I need to repartition? If so, how do I do it? If not, how do I fix this error?
Click to expand...
Click to collapse
This is an action of last resort. Exhaust all other avenues first.
boscorama said:
What did you try to flash and how did you try doing it (CWM, ODIN, ...)?
What 'issues'?
Click to expand...
Click to collapse
I used CWM to flash AOSP 4.1.2. It seemed to work fine for a day or two, but then it needed charging (as normal). I let it charge over night and in the morning it had less battery. I figured the charger or cable were flaky so I tried another set on another outlet and same thing. Then it finally ran out of battery. I let it charge again over night and when I tried to turn it on it was really slow. The boot animation was only 1 frame every couple seconds. It would eventually boot all the way up, but it was still REALLY slow. So I went into CWM and reflashed the same ROM. Then I got a boot loop of the boot animation. I couldn't get into CWM any more, so then I went into download mode and flashed the official firmware and flashed it with ODIN.
boscorama said:
How far into the boot sequence does it get?
Click to expand...
Click to collapse
Now when I turn it on it just says, "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I can flash again with ODIN and it will get to the Samsung boot animation and just pulse SAMSUNG.
boscorama said:
Are you able to get into recovery?
If so, what recovery do you have (Stock vs CWM)?
Click to expand...
Click to collapse
If I hold power and volume down I can get into download mode or Samsung recovery, not CWM, and power with volume up doesn't do anything.
boscorama said:
Have you tried seeing what is causing the boot-loop using adb?
Click to expand...
Click to collapse
I don't know anything about adb and I'm not sure what I would be looking for. Is there a tutorial I can follow somewhere?
Thanks for any help!
This worked for me with similar problem
Hi Spazlon,
Sorry I'm not allowed to post links yet as I am also very fresh. But I've underlined the addresses so you should be able to find them
I just spent the best of 2 days trying to solve a similar issue - my 8.9 P7300 kept running in boot loop. It had been running ICS stable for several weeks, then suddenly started to loop boot for no good reason. Anyway - you need two programs installed on your computer as well as USB drivers for your tablet. The two programs are Odin and SDK developer package. Odin3 v 1,87 and 1.85 are found here: filecrop.com/Odin-1.87 - try some of the links, one of them should work without having to type a password. The SDK is found here: developer.android.com/sdk You can find more about how to use the developer package on that site as well, but I installed as support for Android 2.1 through to 4.1
Also install the USB driver files for your tablet on your PC. For example from here: xpdrivers.com/usb/_1_24.cfm?gclid=CL2iDs7MCFWF7cAodxFYANQ
You also need the following recovery files which you can find by searching the developer forum for galaxy tab 8.9:
ClockworkMod_Recovery_v5.5.0.4.tar
P73xx_Stock_Recovery.tar
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and finally a ROM of your choice, for example the ICS rom cm-9-20121028-NIGHTLY-p5.zip that I just used. You can find the latest official ICS ROM's here get.cm/?device=p5
Now - hold down the volume down button on one of the boot cycles. You should now get into a menu with two choices - Download and Recovery. Default is "Download" - if you press volume down you switch between the two choices. Press volume up to select the choice you want.
First you want to select the "Download" option. Then connect your tablet to your PC. The drivers should now install and your tablet should read that you are connected.
Now start Odin3. Click the PDA button and select your P73xx_Stock_Recovery.tar file. Then press Start.
Once finished the tablet will reboot, and you now need to once again get into the recovery menu. Now select the recovery option, not the download menu. You get into the stock recovery menu where you navigate with the volume buttons and select choices with the power button. Do a full factory reset and wipe the cache. WARNING - you will loose ALL your data, but it'either that or stick to a bricked tablet so.... You will also loose your root access,m which is why the next step is needed.
Now that everything is wiped clean you can use Odin again in "download mode" to install ClockworkMod_Recovery_v5.5.0.4.tar with the same procedure as before. You now have root access.
Reboot again and once again into the recovery mode (not download mode). Once you get into the CWM recovery menu you are ready for the final step, which is to install your new operating system.
Go to your SDK installation folder and find the folder named "platform-tools".
First you want to copy two files into this folder (provided you want to install Cynaogen Mod 9):
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and
Your ROM file of choice
Press shift and right-click in that folder and select "Open command window here". In the command prompt write
adb shell
Note - I had some problems here which was caused by lack of permissions. On your tablet in the CWM menu there should be a choice under the advanced menu for fixing permissions. Use that and you should be able to get into the terminal shell afterwards with the adb shell command
Now write the following command sequence:
• mount /data (don't worry if you get an error message - it means the folder is already mounted)
• cd /data
• mkdir media (if you get an error message saying the folder already exists, that's also OK!)
• exit
• adb push Clockwork_Recovery_6.0.0.8_GT-P7300.zip /data/media
Now you may have to wait a little while until your command prompt is back confirming that the file was uploaded.
Now on your tablet go to the menu point "install zip from sdcard" and find your CWM file that you just uploaded and run that.
Reboot once again into the "recovery mode" - we are now nearly finished.
Run the above push command again from the computer terminal window, this time to upload the ROM file you want to install. (the command is adb push [filename].zip /data/media)
Now on your CWM recovery menu once again run the zip file you just uploaded from the "install zip from sdcard" menu
When completed and you now reboot you should have a completely fresh android installation. Hope this helps.
Remember to mark this thread with solved if it works!
Thanks to kallt_kaffe and all the others who helped me through their various posts (hope that coffee isn't getting too cold again), as well as the following web sites that indirectly helped me resolve this issue googleymind.com/2011/11/guide-so-you-think-you-bricked-your.html#.UJUNN8XAd8G and galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way/
Good luck.
Thanks! I'll give this a try when I get home. I'll let you know how it works out.
Don't ever try to 'repartion unless you really know what you're doing. You're soft bricked. Repartion and you'll hard brick.
I'd go back and get hc from sammobile and flash that with Odin. Ics has had some problems.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Don't ever try to 'repartion unless you really know what you're doing. You're soft bricked. Repartion and you'll hard brick.
I'd go back and get hc from sammobile and flash that with Odin. Ics has had some problems.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Agreed - my procedure avoids manual repartitioning - I tried lots of other procedures but none worked. I think my data partition had become corrupt because I kept getting error messages. My first try was to recover with my cwm recovery file I made originally but I kept getting back to the boot loop .
spazlon said:
Hello,
I tried installing a custom ROM on my 7310 and it had issues. I have tried installing the original ICS from the sammyfirmware site using ODIN. Now I have a boot loop. I think I need to repartition, but when I click the repartition checkbox in ODIN I get an error.
Do I need to repartition? If so, how do I do it? If not, how do I fix this error?
Thanks.
Click to expand...
Click to collapse
I always got something like that ...
After bootloop just go to recrovery mode then factory riset ... its 100% WORK
Sent from my GT-P7300 using xda premium
I followed the steps outlined by mobjunky and was able to get an official Honeycomb ROM installed, boot the official and copy my custom ROM and CWM 6.0.0.8 on it. Then install CWM 5.4.0.4 followed by 6.0.0.8.
Now my problem is that any custom ROM I put on there just does a boot screen loop. I tried CM10 and the latest AOSP. To install the ROMs I just booted into CWM, installed the ROM from zip, then installed the gapps. I've tried with and without formatting the cache, user data, and Dalkiv, same results.
What am I doing wrong? I have loaded tons of ROMs on this before without any issues, then all of a sudden I can't get anything except official loaded.
spazlon said:
I followed the steps outlined by mobjunky and was able to get an official Honeycomb ROM installed, boot the official and copy my custom ROM and CWM 6.0.0.8 on it. Then install CWM 5.4.0.4 followed by 6.0.0.8.
Now my problem is that any custom ROM I put on there just does a boot screen loop. I tried CM10 and the latest AOSP. To install the ROMs I just booted into CWM, installed the ROM from zip, then installed the gapps. I've tried with and without formatting the cache, user data, and Dalkiv, same results.
What am I doing wrong? I have loaded tons of ROMs on this before without any issues, then all of a sudden I can't get anything except official loaded.
Click to expand...
Click to collapse
Sorry - being a newbie myself I'm at a loss. It worked a charm for me.
spazlon said:
I followed the steps outlined by mobjunky and was able to get an official Honeycomb ROM installed, boot the official and copy my custom ROM and CWM 6.0.0.8 on it. Then install CWM 5.4.0.4 followed by 6.0.0.8.
Now my problem is that any custom ROM I put on there just does a boot screen loop. I tried CM10 and the latest AOSP. To install the ROMs I just booted into CWM, installed the ROM from zip, then installed the gapps. I've tried with and without formatting the cache, user data, and Dalkiv, same results.
What am I doing wrong? I have loaded tons of ROMs on this before without any issues, then all of a sudden I can't get anything except official loaded.
Click to expand...
Click to collapse
did a format /system before installing the custom roms? This is an important step.
prince93 said:
did a format /system before installing the custom roms? This is an important step.
Click to expand...
Click to collapse
This fixed it. Never had to do it with any of my other devices. CM10 loaded quickly after that. Loving how fast JB is!
Thanks!
Sent from my GT-P7310 using Tapatalk HD
It worked
mobjunky said:
Hi Spazlon,
Sorry I'm not allowed to post links yet as I am also very fresh. But I've underlined the addresses so you should be able to find them
I just spent the best of 2 days trying to solve a similar issue - my 8.9 P7300 kept running in boot loop. It had been running ICS stable for several weeks, then suddenly started to loop boot for no good reason. Anyway - you need two programs installed on your computer as well as USB drivers for your tablet. The two programs are Odin and SDK developer package. Odin3 v 1,87 and 1.85 are found here: filecrop.com/Odin-1.87 - try some of the links, one of them should work without having to type a password. The SDK is found here: developer.android.com/sdk You can find more about how to use the developer package on that site as well, but I installed as support for Android 2.1 through to 4.1
Also install the USB driver files for your tablet on your PC. For example from here: xpdrivers.com/usb/_1_24.cfm?gclid=CL2iDs7MCFWF7cAodxFYANQ
You also need the following recovery files which you can find by searching the developer forum for galaxy tab 8.9:
ClockworkMod_Recovery_v5.5.0.4.tar
P73xx_Stock_Recovery.tar
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and finally a ROM of your choice, for example the ICS rom cm-9-20121028-NIGHTLY-p5.zip that I just used. You can find the latest official ICS ROM's here get.cm/?device=p5
Now - hold down the volume down button on one of the boot cycles. You should now get into a menu with two choices - Download and Recovery. Default is "Download" - if you press volume down you switch between the two choices. Press volume up to select the choice you want.
First you want to select the "Download" option. Then connect your tablet to your PC. The drivers should now install and your tablet should read that you are connected.
Now start Odin3. Click the PDA button and select your P73xx_Stock_Recovery.tar file. Then press Start.
Once finished the tablet will reboot, and you now need to once again get into the recovery menu. Now select the recovery option, not the download menu. You get into the stock recovery menu where you navigate with the volume buttons and select choices with the power button. Do a full factory reset and wipe the cache. WARNING - you will loose ALL your data, but it'either that or stick to a bricked tablet so.... You will also loose your root access,m which is why the next step is needed.
Now that everything is wiped clean you can use Odin again in "download mode" to install ClockworkMod_Recovery_v5.5.0.4.tar with the same procedure as before. You now have root access.
Reboot again and once again into the recovery mode (not download mode). Once you get into the CWM recovery menu you are ready for the final step, which is to install your new operating system.
Go to your SDK installation folder and find the folder named "platform-tools".
First you want to copy two files into this folder (provided you want to install Cynaogen Mod 9):
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and
Your ROM file of choice
Press shift and right-click in that folder and select "Open command window here". In the command prompt write
adb shell
Note - I had some problems here which was caused by lack of permissions. On your tablet in the CWM menu there should be a choice under the advanced menu for fixing permissions. Use that and you should be able to get into the terminal shell afterwards with the adb shell command
Now write the following command sequence:
• mount /data (don't worry if you get an error message - it means the folder is already mounted)
• cd /data
• mkdir media (if you get an error message saying the folder already exists, that's also OK!)
• exit
• adb push Clockwork_Recovery_6.0.0.8_GT-P7300.zip /data/media
Now you may have to wait a little while until your command prompt is back confirming that the file was uploaded.
Now on your tablet go to the menu point "install zip from sdcard" and find your CWM file that you just uploaded and run that.
Reboot once again into the "recovery mode" - we are now nearly finished.
Run the above push command again from the computer terminal window, this time to upload the ROM file you want to install. (the command is adb push [filename].zip /data/media)
Now on your CWM recovery menu once again run the zip file you just uploaded from the "install zip from sdcard" menu
When completed and you now reboot you should have a completely fresh android installation. Hope this helps.
Remember to mark this thread with solved if it works!
Thanks to kallt_kaffe and all the others who helped me through their various posts (hope that coffee isn't getting too cold again), as well as the following web sites that indirectly helped me resolve this issue googleymind.com/2011/11/guide-so-you-think-you-bricked-your.html#.UJUNN8XAd8G and galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way/
Good luck.
Click to expand...
Click to collapse
WOw! This fixed my Tablet! thank you ever so much!!
mjramos15 said:
WOw! This fixed my Tablet! thank you ever so much!!
Click to expand...
Click to collapse
mobjunky said:
Hi Spazlon,
Sorry I'm not allowed to post links yet as I am also very fresh. But I've underlined the addresses so you should be able to find them
I just spent the best of 2 days trying to solve a similar issue - my 8.9 P7300 kept running in boot loop. It had been running ICS stable for several weeks, then suddenly started to loop boot for no good reason. Anyway - you need two programs installed on your computer as well as USB drivers for your tablet. The two programs are Odin and SDK developer package. Odin3 v 1,87 and 1.85 are found here: filecrop.com/Odin-1.87 - try some of the links, one of them should work without having to type a password. The SDK is found here: developer.android.com/sdk You can find more about how to use the developer package on that site as well, but I installed as support for Android 2.1 through to 4.1
Also install the USB driver files for your tablet on your PC. For example from here: xpdrivers.com/usb/_1_24.cfm?gclid=CL2iDs7MCFWF7cAodxFYANQ
You also need the following recovery files which you can find by searching the developer forum for galaxy tab 8.9:
ClockworkMod_Recovery_v5.5.0.4.tar
P73xx_Stock_Recovery.tar
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and finally a ROM of your choice, for example the ICS rom cm-9-20121028-NIGHTLY-p5.zip that I just used. You can find the latest official ICS ROM's here get.cm/?device=p5
Now - hold down the volume down button on one of the boot cycles. You should now get into a menu with two choices - Download and Recovery. Default is "Download" - if you press volume down you switch between the two choices. Press volume up to select the choice you want.
First you want to select the "Download" option. Then connect your tablet to your PC. The drivers should now install and your tablet should read that you are connected.
Now start Odin3. Click the PDA button and select your P73xx_Stock_Recovery.tar file. Then press Start.
Once finished the tablet will reboot, and you now need to once again get into the recovery menu. Now select the recovery option, not the download menu. You get into the stock recovery menu where you navigate with the volume buttons and select choices with the power button. Do a full factory reset and wipe the cache. WARNING - you will loose ALL your data, but it'either that or stick to a bricked tablet so.... You will also loose your root access,m which is why the next step is needed.
Now that everything is wiped clean you can use Odin again in "download mode" to install ClockworkMod_Recovery_v5.5.0.4.tar with the same procedure as before. You now have root access.
Reboot again and once again into the recovery mode (not download mode). Once you get into the CWM recovery menu you are ready for the final step, which is to install your new operating system.
Go to your SDK installation folder and find the folder named "platform-tools".
First you want to copy two files into this folder (provided you want to install Cynaogen Mod 9):
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
and
Your ROM file of choice
Press shift and right-click in that folder and select "Open command window here". In the command prompt write
adb shell
Note - I had some problems here which was caused by lack of permissions. On your tablet in the CWM menu there should be a choice under the advanced menu for fixing permissions. Use that and you should be able to get into the terminal shell afterwards with the adb shell command
Now write the following command sequence:
• mount /data (don't worry if you get an error message - it means the folder is already mounted)
• cd /data
• mkdir media (if you get an error message saying the folder already exists, that's also OK!)
• exit
• adb push Clockwork_Recovery_6.0.0.8_GT-P7300.zip /data/media
Now you may have to wait a little while until your command prompt is back confirming that the file was uploaded.
Now on your tablet go to the menu point "install zip from sdcard" and find your CWM file that you just uploaded and run that.
Reboot once again into the "recovery mode" - we are now nearly finished.
Run the above push command again from the computer terminal window, this time to upload the ROM file you want to install. (the command is adb push [filename].zip /data/media)
Now on your CWM recovery menu once again run the zip file you just uploaded from the "install zip from sdcard" menu
When completed and you now reboot you should have a completely fresh android installation. Hope this helps.
Remember to mark this thread with solved if it works!
Thanks to kallt_kaffe and all the others who helped me through their various posts (hope that coffee isn't getting too cold again), as well as the following web sites that indirectly helped me resolve this issue googleymind.com/2011/11/guide-so-you-think-you-bricked-your.html#.UJUNN8XAd8G and galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way/
Good luck.
Click to expand...
Click to collapse
Gee thanks. This saved my tab. I'd almost given up on it and then voila.

Categories

Resources