Cm updater q - Nexus One Q&A, Help & Troubleshooting

So i have never been able to use cm updater, but I think something is wrong the newest old update it finds is 5.08 isn't that a bit old?
It is still in use right? I never touched the settings other than to also show the older versions and experimental.
Any suggestions?
Sent from my Nexus One using XDA App

It is no longer in use. Cm releases updates through clockwork recovery now.

Related

CM7 7.0.3 not for Nook?

i keep hearing that CM7 7.0.3 has been released but theirs no download when i go to the link to the nightlies. how come? source: http://pocketnow.com/android/cyanogenmod-703-stable-released
CM 7.0.3 is Android 2.3.3. The latest nightly is n63 which is Android 2.3.4. I'm not sure why a 7.0.3 Stable wasn't released for the Nook, but the latest nightly is based on a more advanced version of Android so you're probably not missing anything.
Hrmmm this is good to know
TJNooker said:
CM 7.0.3 is Android 2.3.3. The latest nightly is n63 which is Android 2.3.4. I'm not sure why a 7.0.3 Stable wasn't released for the Nook, but the latest nightly is based on a more advanced version of Android so you're probably not missing anything.
Click to expand...
Click to collapse
thanks for the info! didnt know this, is live wallpaper enabled in n63?
EverythingNook said:
thanks for the info! didnt know this, is live wallpaper enabled in n63?
Click to expand...
Click to collapse
I'm pretty sure live wallpapers are not enabled in n63. This is an issue that others mentioned on the CM7 General Discussion thread in the Nook Development Forums. I think someone figured out how to add them back in manually. Check the aforementioned CM7 thread if you want to take a crack at it.
What's wrong with life wallpaper? It works fine in 7.0.2 stable.
As a side note, 7.0.3 is built on Android 2.3.3. The latest nightlies have been using Android 2.3.4, but might have the security hole in them as well. For the time being, if you're running a CM7 Nightly, rolling back to 7.0.3 Stable is advised.
UPDATE: 7.0.3 seems to have some problems with adding Google Accounts and trying to do almost anything in the Market, but ONLY if you're coming from an Android 2.3.4 Nightly.
According to Cyanogen: "The 7.0.3 update is *ONLY* for people using 7.0.2* stable builds. You'll hose your system if you install it on a nightly from the last week."
Click to expand...
Click to collapse
Good information in that first link.
Guess I will stay with my nightly!
s52m3 said:
What's wrong with life wallpaper? It works fine in 7.0.2 stable.
Click to expand...
Click to collapse
Yup. I gave it a test drive to see how the nc took to them and immediately went back to plain bgs. I can respect people who like them, I just see it as a battery drain and they tend to be a bit laggy on some "pretty" ones.
Sent from my NookColor using XDA Premium App
s52m3 said:
What's wrong with life wallpaper? It works fine in 7.0.2 stable.
Click to expand...
Click to collapse
There is something specifically done for releases that includes LWP. Why it's not done on every nightly I'm not sure.
Well i just took a visit to cyanogen's site and it looks like this is what they have to say about the 7.0.3 update:
"CyanogenMod 7.0.3 is now available for download. This update contains a bug fix for our update notification system, as well as an important security fix. It is recommended that all users running a version of CyanogenMod prior to 7.0.3 update to this release."
As it says it fixes an important security bug is it not safe to continue running 7.0.2?
The latest nightly (n64) has been posted on cyanogen's site.
Im currently running 7.0.2 and want to update to 7.0.3 but since there is no release of the latest stable update for the nook i'm wondering if i should flash the latest nightly?
dabiddabird said:
Well i just took a visit to cyanogen's site and it looks like this is what they have to say about the 7.0.3 update:
"CyanogenMod 7.0.3 is now available for download. This update contains a bug fix for our update notification system, as well as an important security fix. It is recommended that all users running a version of CyanogenMod prior to 7.0.3 update to this release."
As it says it fixes an important security bug is it not safe to continue running 7.0.2?
The latest nightly (n64) has been posted on cyanogen's site.
Im currently running 7.0.2 and want to update to 7.0.3 but since there is no release of the latest stable update for the nook i'm wondering if i should flash the latest nightly?
Click to expand...
Click to collapse
i would flash the latest nightly but theirs no live wallpapers and i need them for my theme (homescreen hubs)
I have ROM Manager and it says I'm up to date with 7.0.2. Wonder why it can't find .0.3?
Sent from my NookColor using Tapatalk
crea78 said:
I have ROM Manager and it says I'm up to date with 7.0.2. Wonder why it can't find .0.3?
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Thats because there is no 7.0.3 release for the Nook as of now. The latest build is the nightly n64.
Looks like all other supported devices got the 7.0.3 update. I wonder if the security fix is only applicable to phones.
dabiddabird said:
Looks like all other supported devices got the 7.0.3 update. I wonder if the security fix is only applicable to phones.
Click to expand...
Click to collapse
This is what I assumed... Hopefully someone will be able to provide a definitive answer on the issue.
Nook not booting after 7.0.3 upgrade
Today May 9th at 1:00PM CT, I received a notification of the 7.0.3 update on the nook, I proceeded as usual but when the nook tried to reboot it got stuck on the blue "A N D R O I D _" screen. I'ts been there for more than 10 minutes now.
Any ideas on what to do next.
I checked the backup option before proceeding to the upgrade. Unfortunately I don't have here another SD to boot Clockworkrecovery and try to restore.
Thanks
nospamprl said:
Today May 9th at 1:00PM CT, I received a notification of the 7.0.3 update on the nook, I proceeded as usual but when the nook tried to reboot it got stuck on the blue "A N D R O I D _" screen. I'ts been there for more than 10 minutes now.
Any ideas on what to do next.
I checked the backup option before proceeding to the upgrade. Unfortunately I don't have here another SD to boot Clockworkrecovery and try to restore.
Thanks
Click to expand...
Click to collapse
I read that the first .3 was bad, and now there is a Signed .3 version up, is that the one you tried? If so, suggest you go back to nightly as there is a #67 now. I'm not sure why the dev's split off the two builds, 2.3.3 vs 2.3.4 but it was confusing for many, myself included. I'm wondering if the new .3 Signed is 2.3.3 or 2.3.4, how can you tell before installing???
I don't know if I used the signed or not, it was the one that ROM Manager prompted to install.
When I get home I will try to flash the backup made during the process. hope that take me back to where I was.
nospamprl said:
Today May 9th at 1:00PM CT, I received a notification of the 7.0.3 update on the nook, I proceeded as usual but when the nook tried to reboot it got stuck on the blue "A N D R O I D _" screen. I'ts been there for more than 10 minutes now.
Any ideas on what to do next.
I checked the backup option before proceeding to the upgrade. Unfortunately I don't have here another SD to boot Clockworkrecovery and try to restore.
Thanks
Click to expand...
Click to collapse
This has been addressed at least 3 times already........Search
sent from my Ginger-Hero CDMA
***edit*** my phone cut off my message. Search in Q & A that's where the answers are. I forget exactly which thread.

Is your Incredible Stable? or Do you get Force Closes?

I have my Inc running Cm7 7.1 RC1
Radio 2.15.10.05.06
Kernel Chads Incredikernel 7062011
Why the hell is this setup so unstable?
Some days it runs fine.. Other days I get force closes on messaging, Android market, the camera,
Its so annoying..
To everyone else how stable is your phone on an every day basis?
Exact same setup as you, once in awhile FC on startup for a few apps, but no FC otherwise. what's really annoying though is sometimes entire system becomes unresponsive and auto reboots
Sent from my HTC Incredible
Wrong section to post this thread btw
TheLynxy said:
Exact same setup as you, once in awhile FC on startup for a few apps, but no FC otherwise. what's really annoying though is sometimes entire system becomes unresponsive and auto reboots
Sent from my HTC Incredible
Click to expand...
Click to collapse
If you undervolted your kernel then this is a common issue, and it means you should raise the voltages.
--
Also I haven't gotten any FC's running CM7.1 #106 nightly.
If it's bugging you enough and you want to *try* and fix it then I suggest you flash the latest nightly (#136 or 137) - but make sure you do a full wipe and format /system. Also clear all your caches. If you do restores from TIbackup then make sure you don't restore data.
That's all I can suggest, hope your problems with CM gets sorted out eventually.
^ Also try fixing permissions.
Sent from my Droid Incredible running a random CM7 nightly.
im not undervolted... sounds like cm needs a better stable code
Sent from my ADR6300 using XDA App
i fixed permissions
Sent from my ADR6300 using XDA App
I get the force closes and unresponsiveness time to time no matter what rom. Most of the time it's an app but every once in while it is a system app.
A lot of times it is poorly written apps not the rom. Run without any apps and you will see your phone runs great for a long time. Unfortunately theres no way to know if an app is written well without trying it. I wish google had a better way to control this.
I'm on and off CM. Ive been running 7.1.0. for about a week havent had a problem/FC. I have also restored app+data using TBU even though it isn't recommended Do you have this problem with any other roms.
Sent from my ADR6300 using XDA App
Gorilla* said:
im not undervolted... sounds like cm needs a better stable code
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
lol, cm's code is fine...
Usually things like this are user error/app related, and if not, then most likely something wrong with your phone. Otherwise we would see a mass amount of users reporting these problems. Which we don't..
Running CM7, I've had no fc's at all, no app problems, etc when following instructions, other than in the past some of the legitimate bugs that have popped up, and been fixed.
Did you flash RC1 over a nightly or any other previous CM build?, restore apps with Ti-Backup, Over or underclocked the kernel at all, Other various things that could result in fc's? Might wana try just running with no apps like nfiniti9 said, on a fresh install, Default kernel, and then see what happens.
I used the same setup besides the radio. I'm using 2.15.00.11.19 and I found it to be really buggy as well. Right now I'm using nightly 130 and incredikernel 06192011. I found this kernel to be more stable for me.
Sent from my Droid Incredible using XDA App
I have same setup with aggressive undervolt script from chad. Have not had a force close or reboot yet, and I have been using RC1 since it dropped, and nightlies for weeks before that. I am using the new GB leak radio also.
Obvious, but have you done a full clean wipe/flash? Check MD5 sum?
CM7RC3
Latest Incredikernel
Never changed radio
100% stable
OMFGB nightly 7-05
chads beta 2 with usb fast charge
stock radio
800 min voltage and -25 max voltages.
nothing to complain about, stock battery lasts anywhere from 5- 13 hours depending how hard i use it
any issues i was having i think i found out the problem... i was uaing titanium to restore after a full wipe and i was restoring all my settings wbich messed the phone up again after a clean wipe... this time i got smarter and did a clean wipe but i only restored my applications instead of system settings... this seems to have fixed issues for now.
Sent from my ADR6300 using XDA App
Running cyanogenmod 7.0.2.1 and I'm about to switch to 7.0.3 because I'm getting a lot of force closes lately, running the latest incredikernel as well.
1. This doesn't belong in development. Being a QUESTION, it would be much better suited to Q&A.
2. The OP is the fool that was trolling Chad's thread.
Facedown41 - I'd recommend flashing the latest nightly, its perfectly stable with a lot of new features. 7.0.3 is a bit dated.
Mercutio5 said:
CM7RC3
Latest Incredikernel
Never changed radio
100% stable
Click to expand...
Click to collapse
Same here. I just started using CM for about a week or so but so far not 1 fc 100% stable and fast.
Cm7 7.1 RC1 <---- problem right there.
RC = 100% stable.
im still on 7.0.3
The solution to your problem is to run a cache cleaner. This happened to me many times before and if you run it, it clears up a lot of space in the data/data partition so your apps have room in the memory to run w/o force closing!

Goo-inside.me app

So I've read that their probably won't be very many more if any releases for CM9 for a while unless something major needs addressing. So my question is that I found the Goo-inside.me app online that is to support OTA updates of the CM9 nightlys. I have just downloaded the app in the last few minutes and I'm trying to play with it a little but I'm at work so I have not used it much yet
but does anyone see anything about CM9 nightlys? All I can find is a CM folder that seems to contain a list of different devices (touchpad is not one of them)
It's possible that the nightly's are checked for new updates when you go into settings and click "check for updates"...but just wondering if anyone can speak to this?
So just in case anyone needs to know the ROM update feature of this app will only work if you are on nightly's.
In other words, if your just on regular CM9 A2 it won't say a new ROM update is available until the next major update. If your on a nightly, it will pop up every time a new nightly is available for download and flashing.

[Q] Need help going from cm9 nightly to cm9 stable

Im running a cm9 nightly.
When i saw a stable version was available, i downloaded it and attempted to flash
It got the attached pic when i attempted.
Is there any way to do it via cell phone? I do not have a computer, so this is the only option.
It should be noted i only want to move to the stable version because my GPS does not work with this nightly, so if there is a fix for that, it will be good as well.
Thanks.
ryuchi2 said:
Im running a cm9 nightly.
When i saw a stable version was available, i downloaded it and attempted to flash
It got the attached pic when i attempted.
Is there any way to do it via cell phone? I do not have a computer, so this is the only option.
It should be noted i only want to move to the stable version because my GPS does not work with this nightly, so if there is a fix for that, it will be good as well.
Thanks.
Click to expand...
Click to collapse
From your picture it looks like you downloaded a ROM for the wrong phone. The error youre getting is the updater script trying to verify what phone its being installed to. The error is referencing galaxys and i9000 when the captivate is an sgh-i897. On cm's site its also labeled as captivatemtd in the download list.
Verify that the ROM you have downloaded is specifically for the captivate and/or download the one for the captivate and try again.
Sent from my SGH-I897 using XDA
ryuchi2 said:
Im running a cm9 nightly.
When i saw a stable version was available, i downloaded it and attempted to flash
It got the attached pic when i attempted.
Is there any way to do it via cell phone? I do not have a computer, so this is the only option.
It should be noted i only want to move to the stable version because my GPS does not work with this nightly, so if there is a fix for that, it will be good as well.
Thanks.
Click to expand...
Click to collapse
Also, attaching pic of phone information
m1batt1 said:
From your picture it looks like you downloaded a ROM for the wrong phone. The error youre getting is the updater script trying to verify what phone its being installed to. The error is referencing galaxys and i9000 when the captivate is an sgh-i897. On cm's site its also labeled as captivatemtd in the download list.
Verify that the ROM you have downloaded is specifically for the captivate and/or download the one for the captivate and try again.
Sent from my SGH-I897 using XDA
Click to expand...
Click to collapse
Is there a cm9 stable for i897?
ryuchi2 said:
Is there a cm9 stable for i897?
Click to expand...
Click to collapse
http://download.cyanogenmod.com/?type=stable&device=captivatemtd
Go to that link. There are two latest stable one is first on the list.
Sent from my SGH-I897 using XDA
Okay, so I think there is a bigger issue here. I have installed cm7 (7.2, stable), cm9, and cm10, and the GPS does not work on any of them. What is the deal?
ryuchi2 said:
Okay, so I think there is a bigger issue here. I have installed cm7 (7.2, stable), cm9, and cm10, and the GPS does not work on any of them. What is the deal?
Click to expand...
Click to collapse
Depending on the modem you have installed it could be causing your problems. I was messing with modems one day and flashed one that gave me great signal but when I went to use my GPS I couldn't get it to lock onto a single sat.
http://soggycashew.weebly.com/cm7miui--ics-modems.html
That will take you to a rather extensive list of available modems. Use the ones that are located directly at that link. There are other options but they will not install on cm7 and up.
I personally use the ugkg3 and it works great
Sent from my SGH-I897 using XDA
I have only ever used CM, and haven't installed anything else, so I guess it is a stock modem (not even entirely sure what a modem is). The thing is, my GPS used to work on cm7, but once I put on the cm9 nightly, it stopped. I bent the antenna out a bit to make sure it was making contact with the battery cover (saw that on the internet), and when I turned it back on, it caught its location once, but wouldn't do it again. I guess I'll have to make a desperate thread about my GPS not.working. thanks for the help though!
I highly recommend the GPS fix flashable mod. I never had working GPS without it. An xda search will lead you there.
Sent from a jelly bean

Official CM10

I want to know that the official cm10 has any bugs??
On cm website they call it stable.
mujeeb999 said:
I want to know that the official cm10 has any bugs??
On cm website they call it stable.
Click to expand...
Click to collapse
The best way to know would be to read their thread (last few pages and OP) as well as trying it for yourself.
Not entirely sure if it's related to CM, but only on the latest stable (10.0) I've had issues with my WiFi not wanting to stay connected, even on a strong connection.
Everything else works great!
Sent from my SGH-I897 using xda app-developers app
mujeeb999 said:
I want to know that the official cm10 has any bugs??
On cm website they call it stable.
Click to expand...
Click to collapse
I use it right now. It seem stable
Sent from my SGH-I897 using xda app-developers app
I just installed it yesterday. Problem with mine was that the ASOP keyboard not working. Luckily I just dled teh swiftkey.apk a day earlier. Play store wasn't working for me either and the browser just open and close. That's all i tried. I'm going back to CM9 til I know whats wrong and back up some data.
I installed the stable cm10 and the gapps. Hope others dont run in to the same problem as me
Did you restore your apps or app data? That would most likely cause this problem. Or flashing the wrong gapps.
Sent from my SGH-I897 using xda app-developers app
No, once I got cm10 installed. I was trying to change some of the settings and found "keyboard(ASOP) stopped working" or some error message along the line of that when I try to enter wireless password. After installing swiftkey, I tried opening play store and it just have "server error"
So I haven't gotten to getting titanium backup yet to restore apps
I just took the latest gapps (the first link on the list), so I'm not sure if that's the right one. I'll try again during the weekend. I'll let you guys know if it goes well.
I'm on CM 10 latest stable build, 4.1.2. Came from GB kk4 plus corn 7 kernel. with latest gapps. I use touchpal keyboard.
I have TiBU pro, but rather than batch install apps, I went though google play to install apps, then selectively restored data on apps with TiBU as needed. While this took some time with this approach (96 apps), CM10 is flawless, virtually no probs at all. it actually seems more stable than before.
at times a little laggy but not a showstopper.
Sent from my SGH-I897
(edit: added keyboard info)
UPDATE: Just flashed to CM10 stable. I found out that the GAPPS I used last time was actually for CM10.1.0 while the CM10 that is out is only CM10.0.0
Be sure to get the right version of GAPPS. The latest one they have is for CM10.1.0
laughingT said:
I'm on CM 10 latest stable build, 4.1.2. Came from GB kk4 plus corn 7 kernel. with latest gapps. I use touchpal keyboard.
I have TiBU pro, but rather than batch install apps, I went though google play to install apps, then selectively restored data on apps with TiBU as needed. While this took some time with this approach (96 apps), CM10 is flawless, virtually no probs at all. it actually seems more stable than before.
at times a little laggy but not a showstopper.
Sent from my SGH-I897
(edit: added keyboard info)
Click to expand...
Click to collapse
Looks like I'm the unlucky one den. I'm about to try again. I'm using cm's 3.0.8-g2311908 kernel.
Wish me luck.
you are correct, you want the 10.0.0 version from goo, which points to gapps 4.2, backward compatible to 4.1.
http://goo.im/gapps/gapps-jb-20121011-signed.zip
thats what I used. I guess the 4.2 set the 'latest' bit in my brain.
Sent from my SGH-I897

Categories

Resources