Database Develop

Bricked Rogers Samsung Captivate (i896)

silly me decided to install a custom battery icon. In the description for the mod on app planet it said to use with froyo but didnt say it would not work with eclair. I installed the mod without problems and I thought everything was going well, but now my phone is bricked, and wont load past the samsung i896 boot screen even after deleting all user data and wiping my cache in recovery mode. So I guess my only option now is to flash a rom using odin, but id rather prefer not to flash to a stock ATT 2.1 rom, i would like to flash back to my original stock rogers.
Is it possible to flash to an ATT rom, then do a factory reset from the privacy settings of the phone to bring me back to rogers stock rom?

ATT rom =/= Rogers rom
You'll need to search and find a Rogers rom you can stick in Odin and flash with if you want Rogers

I don't think you can easily return to Rogers stock rom using odin. Most people end up having AT&T logo on boot. However, since you're soft bricked anyways, why don't you try using Heimdall, new Open-Source Flashing Software and this dump generated from stock Rogers phone.
I haven't seen any reports of tests on Captivate yet, but it seems to work well on other Galaxies. Check Heimdall thread for more info, and if it works well for you, please report to this thread. Good luck!

thanks, i installed heimdall perfectly fine, it recognizes my device, but i cant download that PIT file from megaupload, its failed to download multiple times. Is there any other links?
I will keep trying

all good to go now,
used this rogers stock rom
http://www.megaupload.com/?d=BD2EF4WF
and flashed it without any problems. Glad to have a working phone again even though i lost everything

Did you use heimdall our some other method?
Sent from my SAMSUNG-SGH-I896 using XDA App

Hi! I just came across the same issue. I've been using the Cognition ROM on my Captivate for some months now and only today decided to switch to Perception 8. I downloaded the latter and rebooted through ROM Manager which, as I've done before, rebooted and backed up all my data. It then proceeded to erase all user data and cache and attempted to install Perception 8 ROM, but was unsuccessful. It provided me with a usual list of options, including 'Reboot', 'Backup' (i think) and others. I chose to Reboot thinking it would just go back to the last best ROM (i.e. Cognition latest, in my case).
Now it just reboots and refuses to go past the at&t World Phone boot screen.
I've tried the button combinations. Up-volume+down-volume+power button, up+power, up+home+power, down+home+power (!). All these seem to reboot the phone and in about 10 seconds after I press them, takes me right back to the same boot screen and not past it.
I'm fairly sure my old data is backed up somewhere inside.
I've tried to read the other forums, but nothing in particular seems to work for me. I run Ubuntu on my laptop, wanted to try Heimdall but its download page is down.
Any suggestions on how to proceed would be greatly appreciated.
1) Any other button combinations?
2) Any other tricks, including ways to using Heimdall (whose source files I can't seem to find), to get into my device?
Apologies for the detail, but I presume there's someone who knows exactly what I'm talking about.
OP, what software did you end up using on your computer to gain access to the device?
Thanks.

sshvetsov said:
Did you use heimdall our some other method?
Sent from my SAMSUNG-SGH-I896 using XDA App
Click to expand...
Click to collapse
yes i used it, installed the drivers on my pc, downloaded the rom i provided in my response and flashed it, worked flawlessly without problems.

nostratispeak said:
Hi! I just came across the same issue. I've been using the Cognition ROM on my Captivate for some months now and only today decided to switch to Perception 8. I downloaded the latter and rebooted through ROM Manager which, as I've done before, rebooted and backed up all my data. It then proceeded to erase all user data and cache and attempted to install Perception 8 ROM, but was unsuccessful. It provided me with a usual list of options, including 'Reboot', 'Backup' (i think) and others. I chose to Reboot thinking it would just go back to the last best ROM (i.e. Cognition latest, in my case).
Now it just reboots and refuses to go past the at&t World Phone boot screen.
I've tried the button combinations. Up-volume+down-volume+power button, up+power, up+home+power, down+home+power (!). All these seem to reboot the phone and in about 10 seconds after I press them, takes me right back to the same boot screen and not past it.
I'm fairly sure my old data is backed up somewhere inside.
I've tried to read the other forums, but nothing in particular seems to work for me. I run Ubuntu on my laptop, wanted to try Heimdall but its download page is down.
Any suggestions on how to proceed would be greatly appreciated.
1) Any other button combinations?
2) Any other tricks, including ways to using Heimdall (whose source files I can't seem to find), to get into my device?
Apologies for the detail, but I presume there's someone who knows exactly what I'm talking about.
OP, what software did you end up using on your computer to gain access to the device?
Thanks.
Click to expand...
Click to collapse
i used heimdall, which was linked above, but I was able to get into download mode through my phone since it was soft bricked. IF you can get back into Download mode, then you are fine... Keep trying until you do, otherwise you might have to use the JIG method.

stavs said:
yes i used it, installed the drivers on my pc, downloaded the rom i provided in my response and flashed it, worked flawlessly without problems.
Click to expand...
Click to collapse
That's great news! I'm sure a lot of rogers captivate users will be very happy to learn that. Just curious, where did the linked rom dump come from?
EDIT: Nevermind, found this thread describing Rogers stock restore procedure using Heimdall and the bundle you used.

@nostratispeak: if you have questions about Heimdall, you might want to check the official thread.

sshvetsov said:
@nostratispeak: if you have questions about Heimdall, you might want to check the official thread.
Click to expand...
Click to collapse
Yup. Just did. The site is back up and working. I've the downloaded the files too. Now, to get my phone to work.

@stavs Thanks.
Just curious. What's the difference between a soft brick and hard one? My Captivate simply refuses to get past the AT&T World Phone logo white boot screen - the very first one when you normally reboot the Captivate. I'm not sure if I'm in the 'Download' mode. And, I don't have access to the material required for the JIG. So, I'm hoping to get this done the software route.
Is there a chance that anything from my last best Cognition ROM is still active in there somewhere?
I'm also afraid that if I keep my phone ON for too long, it will simply die out and refuse to recharge.
Thanks.
EDIT: I followed the instructions from this thread and I have the phone in what I believe, is the Download mode: Droid shoving dirt within a filled yellow triangle, with a message "Downloading" "Do not turn off Target". My device is connected to my laptop. I don't see anything popping up on the screen. I also have Heimdall frontend up and running in Ubuntu.
I've downloaded a few ROMs, including Cognition and some samsung stock firmware. There are conflicting information in different pages. Am not sure what to do next. Help?

nostratispeak said:
@stavs Thanks.
Just curious. What's the difference between a soft brick and hard one? My Captivate simply refuses to get past the AT&T World Phone logo white boot screen - the very first one when you normally reboot the Captivate. I'm not sure if I'm in the 'Download' mode. And, I don't have access to the material required for the JIG. So, I'm hoping to get this done the software route.
Is there a chance that anything from my last best Cognition ROM is still active in there somewhere?
I'm also afraid that if I keep my phone ON for too long, it will simply die out and refuse to recharge.
Thanks.
Click to expand...
Click to collapse
Your device isn't bricked as such, it's caught in a boot-cycle. This is actually worse than a soft brick and in some ways is comparable to a "hard" brick. It's comparable to a hard brick because when you're in a boot cycle you usually can't get into download mode. Presumably the only option is to use a custom JIG, as you've mentioned.
There is no official terminology but a soft brick is generally when your phone displays the "connect phone to pc" screen. A hard brick is a bit more difficult to define, but I'd say it's fairly reasonable to assume that this is when your phone won't turn on or charge. A brick (full brick?) is when your device is absolutely not recoverable by any means.

nostratispeak said:
@stavs Thanks.
Just curious. What's the difference between a soft brick and hard one? My Captivate simply refuses to get past the AT&T World Phone logo white boot screen - the very first one when you normally reboot the Captivate. I'm not sure if I'm in the 'Download' mode. And, I don't have access to the material required for the JIG. So, I'm hoping to get this done the software route.
Is there a chance that anything from my last best Cognition ROM is still active in there somewhere?
I'm also afraid that if I keep my phone ON for too long, it will simply die out and refuse to recharge.
Thanks.
EDIT: I followed the instructions from this thread and I have the phone in what I believe, is the Download mode: Droid shoving dirt within a filled yellow triangle, with a message "Downloading" "Do not turn off Target". My device is connected to my laptop. I don't see anything popping up on the screen. I also have Heimdall frontend up and running in Ubuntu.
I've downloaded a few ROMs, including Cognition and some samsung stock firmware. There are conflicting information in different pages. Am not sure what to do next. Help?
Click to expand...
Click to collapse
thats great news than, now with the one of the downloaded roms you have saved on your computer, take the data (ie Factoryfs.rfs,cache.rfs, modem.bin and Zimage) and link it appropriately in the program. Then just click the start button and it will automatically install the rom within minutes. You shouldnt see anything pop up, i dont remember seeing anything, but during the installation there should be a download bar on your phone to indicate data is being transfered and downloaded to your phone. After your phone should reboot and be back to normal.

stavs said:
all good to go now,
used this rogers stock rom
and flashed it without any problems. Glad to have a working phone again even though i lost everything
Click to expand...
Click to collapse
Does this remove the AT&T boot logo and replace with the Rogers logo as well? Stavs, I'm assuming you went from the Rogers ROM, back to the Rogers ROM, so this probably not apply to you, but have any of you guys been able to get rid of the AT&T logo from a previous flash, and restore the Rogers logo using this method, and ROM?

stavs said:
all good to go now,
used this rogers stock rom
megaup*****com/?d=BD2EF4WF
and flashed it without any problems. Glad to have a working phone again even though i lost everything
Click to expand...
Click to collapse
used the same rom flashed it with odin but didnt load the pit file... made sure re-partitioned was UNchecked and off i went... restored my phone to 2.1 and was finally able to get kies to recognize my phone and upgrade it after 5 days in hell trying various things, flashing different "stock" ROMs... i finally did it tho... running froyo as we speak...

I am not sure if anyone suggested this already but i896 users can flash stock Rogers 2.1 using this method. No AT&T screens. Works great.
http://forum.xda-developers.com/showthread.php?t=979133

[Q] Unrootable Captivate - Please Help

As you are about to see, I'm new to this.
I have been attempting to root my Captivate. I have tried Galaxy One Click Root and Super One Click 1.7, among others.
My phone won't enter recovery mode. I have tried to install z4root, which the phone blocks. I've tried using sideload wonder machine, which doesn't work either.
I downgraded to 2.1....nothing. Reloaded 2.2....nothing.
Any advice would be helpful at this point, and please be specific, as I am slightly retarded.

It its rumored that Odin one click to jf 6 will actually get rid if the recovery/ download modes, maybe try flashing a cognition ROM
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

ryanmahan said:
It its rumored that Odin one click to jf 6 will actually get rid if the recovery/ download modes, maybe try flashing a cognition ROM
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
That's not a rumor, it's a fact. Does not happen with all models.

What about full odin to jf6? I personally like to use odin every so often to master clear.
It would explain why superone click wouldnt root my phone lst time i master cleared, too. Ended up installing cwm and flashing straight to rom(which took care of rooting and 3rd party apps)

mrhaley30705 said:
What about full odin to jf6? I personally like to use odin every so often to master clear.
It would explain why superone click wouldnt root my phone lst time i master cleared, too. Ended up installing cwm and flashing straight to rom(which took care of rooting and 3rd party apps)
Click to expand...
Click to collapse
As I said, I'm slightly retarded. Do you know of a forum with instructions for doing this? Everything else I've tried has just caused a face to appear on my phone's screen laughing at me.

When you use super one click, did you enable usb debugging?
Sent from a place my wife doesn't know about

The captivate is actually an extremely easy root process...
Download this file update.zip
Put it on your internal SD card (internal Memory) not your SD card you can remove
Turn off your phone
Once off hold both volume up and down and hold power until you see the AT&T boot screen then let go of all 3 buttons. You should see recovery mode soon. Select Reinstall Packages, congratulations you are now rooted.

Is that the modded cwm? I think he said he was on 2.2. Regular cwm won't work with froyo(signature verification errors). There is a modded one somewhere on this site that either replaces 3e, our fixed sig on cwm.
Sent from a place my wife doesn't know about

I think he downgraded to 2.1 again which is what you'll need to be on to use the method I described.

jayjr1105 said:
I think he downgraded to 2.1 again which is what you'll need to be on to use the method I described.
Click to expand...
Click to collapse
I'm running 2.2
1-Downloaded and installed file update.zip to internal sd. Turned off phone. Tried to enter recovery mode. Got blank screen, att screen, blank screen, att screen, blank screen, etc etc.
2-Tried to install z4root. Blocked by phone. Tried to use sideload wonder machine, which can't detect the phone (in usb debugging mode and mass storage (tried both))
3-Tried Super One Click, which ran but did nothing.
4-Flashed to 2.1 and factory reset. Tried (2) again. Failed. Tried 1-3. Failed.
5-Flashed to a different version of 2.2. Started over. Failed.
I've been using some of the mobile tech videos, but everytime I get to the "Eureka!" phase, my phone just laughs at me.

use odin full version to flash speedmod kernel on 2.2, i even do this on 2.1, but on 2.1 you need the .zip file on the sdcard before you start because the phone will not boot with a 2.2 kernel, only enter recovery.
once on speed mod kernel you can either root and flash a kernel for att roms or flash a new rom without the need to root, the new rom will be rooted.
if you are on 2.2 you will need a computer one way or another, flashing back to stock can be a pain for those with the 3 button problem and it is way more time consuming than flashing a kernel, i have never used the tools out there but i don't know of an easier way than flashing a kernel via odin, especially if you intend to flash a 3rd party rom. also any time you flash a sbl.bin or boot.bin can be a dangerous situation. bad flashes that break the boot loaders aren't common but it causes enough "omg i bricked" threads to keep me from recommending it. there is a odin one click with a 3 button fix, if you use that once it will be fixed untill you flash a rom with odin that changes the bootloaders again. im not sure if there is a .tar stock rom for odin without the bootloader but that would be a good idea if there isn't.

you must not have the right drivers installed.
2.2 cannot be rooted by using an update.zip....you will need to get your drivers working and adb seeing the device....

sharp1114 said:
I'm running 2.2
1-Downloaded and installed file update.zip to internal sd. Turned off phone. Tried to enter recovery mode. Got blank screen, att screen, blank screen, att screen, blank screen, etc etc.
2-Tried to install z4root. Blocked by phone. Tried to use sideload wonder machine, which can't detect the phone (in usb debugging mode and mass storage (tried both))
3-Tried Super One Click, which ran but did nothing.
4-Flashed to 2.1 and factory reset. Tried (2) again. Failed. Tried 1-3. Failed.
5-Flashed to a different version of 2.2. Started over. Failed.
I've been using some of the mobile tech videos, but everytime I get to the "Eureka!" phase, my phone just laughs at me.
Click to expand...
Click to collapse
sounds like you need the 3button fix first. there is an odin stock rom+3button fix, it should take you to 2.1 but you will get recovery mode. if that fixes the recovery mode 3-button combo and the phone boots you can put the rom of your choice on the sd card, then odin flash speedmod kernel and flash the new rom, warning the phone doesn't boot a 2.1 rom with speedmod kernel, i only do this as a faster way to get into cwm recovery, only do that if you intend to flash a rooted rom from 2.1.

Dani897 said:
use odin full version to flash speedmod kernel on 2.2, i even do this on 2.1, but on 2.1 you need the .zip file on the sdcard before you start because the phone will not boot with a 2.2 kernel, only enter recovery.
once on speed mod kernel you can either root and flash a kernel for att roms or flash a new rom without the need to root, the new rom will be rooted.
if you are on 2.2 you will need a computer one way or another, flashing back to stock can be a pain for those with the 3 button problem and it is way more time consuming than flashing a kernel, i have never used the tools out there but i don't know of an easier way than flashing a kernel via odin, especially if you intend to flash a 3rd party rom. also any time you flash a sbl.bin or boot.bin can be a dangerous situation. bad flashes that break the boot loaders aren't common but it causes enough "omg i bricked" threads to keep me from recommending it. there is a odin one click with a 3 button fix, if you use that once it will be fixed untill you flash a rom with odin that changes the bootloaders again. im not sure if there is a .tar stock rom for odin without the bootloader but that would be a good idea if there isn't.
Click to expand...
Click to collapse
Do you have a suggestion for a stable rom? I don't want to get to the point where I've got it working and throw a terrible third party on it. I'm just looking for device speed and controll over all apps, especially bloatware.

all of the available roms are stable. to be honest TiBu will remove bloat if you want it to.
Try them all and see which one you like. Pretty much all of the custom roms are better than stock. If you like to stay near stock but run more optimized, see Cognition. Otherwise see which one you like more. It's not a hard process if you read up on it.

sharp1114 said:
Do you have a suggestion for a stable rom? I don't want to get to the point where I've got it working and throw a terrible third party on it. I'm just looking for device speed and controll over all apps, especially bloatware.
Click to expand...
Click to collapse
it is hard to go wrong with cognition which is a stock rom with some mods and bloat removed and tethering enabled, that will have the proper kernel and modem for the captivate which for me has great call quality, also the disadvantages of not having hsupa are overblown.
there is also andromeda which is the rom from the armani captivate and is well polished and complete, has some of the more useful samsung apps. this can be used with a 2.2.1 kernel ported from the i9000 for a slight speed boost (shows in benchmarks, may not be detectable in user experience) this has hsupa and is designed for the captivate
i9000 ports are newer 2.2.1 versions and all of the features work now so you may want a newer firmware version from one of those..
there are many 2.2.1 i9000 roms that are fully functional. that is more a matter of feature set and theme preference it is hard to say one is better than the other. id say for stable the speedmod kernel is about the best on an i9000 port, for experimenting with overclock or undervolt i hear that the kernel with paragon is awesome.
now it is odd that you say you flashed a different version of 2.2 but cant get into recovery, was that in odin? can you get download without adb commands?

Dani897 said:
im not sure if there is a .tar stock rom for odin without the bootloader but that would be a good idea if there isn't.
Click to expand...
Click to collapse
Use this method to flash back to stock. Supposed to be much safer that doesn't mess with the bootloader files. I have been using it for about 3 weeks now to flash back to stock. You CAN however still use the one click odin to master clear once you have flashed back to stock.
Back on topic... I would flash back to 2.1 using the above method and master clear to start fresh with this issue. Once that is done look for mobiletechvideo's 3 button fix video on youtube. But even if you have 3 button issues the Galaxy S one click root program should still get you into recovery. It doesn't always succeed in copying the update.zip file to the internal SD card but you can do that manually and just use the program solely to get into recovery. Make sure you have USB debugging on. After the stock flash and master clear it is off by default and samsung kies is on. You might want to invest in a Jig also since you have 3 button issues, it may save you hide someday.
As far as a good rom goes. Really all the 2.2.1 roms are pretty stable and fast. I'm currently using Continuum 4 with the paragon kernel and it floats and sips battery. If you like the stock look you can use cognition. If you like the green themed gingerbread look you can use Phoenix, Serendipity, Firefly, or Paragon which is my personal fav but hasn't been updated in a month.
Anyways good luck. I'm sure you'll figure it out.

oops, got double posted somehow

Thanks for all your advice and help. I finally got it rooted.
I've tried Cognition 4.3 and Paragon, both of which I liked. I like the appearance of Paragon, but the optimization just doesn't seem to be there. Cognition is great for customization, but I the appearance is just to 'stockish' for me, if that makes sense. Something in between would be nice. (Ideas?)
I plan to try Phoenix Unleashed, but i can't get it to download.

The reason why the programs are having a hard time seeing your cappy is because you need the Serial COM driver available only by installing Samsumg's software: Kies Mini... don't run the program just install it. Once you do this Odin and the Wonder Root program can see the phone. I had this issue.

Another bricked phone after oden. 1011. Help!!

I thought I knew what I was doing...
I've read and read and read. Thought I had all my ducks in a row. Thought I had everything figured out. But now I have a bricked phone.
I bought my Captivate refurbished from AT&T about 3 months ago. The mfg date is listed as 1011. It came with Froyo. By the third day I had it rooted and Cognition installed. Loved it. But lately it was starting to freeze up, lag, etc. so I decided to install Serendipity.
I followed the directions in the famous How-To thread here.
Odin reported success, but now my phone is stuck in bootloop. None of the tricks for getting it back into download mode worked.
I went to Radio Shack and bought some resisters and made a jig. Now, I can successfully get back to download mode now, so I'm still holding out hope!
I tried Odin again, but got the same result.
My warranty is up in 3 days. Called warranty place today and they won't do anything unless the phone can get to a recovery screen (probably their way of knowing when people have been doing what I've been doing!). Which it won't. I can put it in download mode with the jig. Otherwise, I just get the boot loop.
I have been stressing over this for the last 15 hours. I can't sleep. I've read countless forum posts. Now I find that Odin with Froyo and phones dated from 1008 and above is tricky. How did I miss that before? I've read so much, seen so many threads with people saying "do this" followed by "no don't do that" followed by "that's always worked for me" but it's not working for ME. At this point I'm confused and scared and just hope somebody can point me to instructions for getting a usable phone again.
EDIT: I see I misspelled "Odin" in the title of the thread... tried to edit it but I can't. Sorry.

That guide has not been updated for 2.3 roms. you should follow the instructions that were written by the rom maker, for the rom your trying to flash
This looks relevant http://forum.xda-developers.com/showthread.php?t=995143
- For unbricking
AdamOutler, is working on a unbrick method. http://forum.xda-developers.com/showthread.php?t=1206216
Or mobiletechvideos they have an unbricking service for 50$
(side-note if you have read and read like you said you should have had come a cross some of this.)

Which Cognition were u on ? And which Odin did u use ?
And since u can still get into Download mode u can relax a little, cause that's a good thing.

Lol relax If the phone shows any signs of life, that means it can be fix (usually). Now if the phone after odin doesn't want to turn on THEN your bricked. Since your phone is a newer build and they have been known to not always like jf6 Odin I suggest you try this KB1 odin. Best of luck

speedy_11 said:
That guide has not been updated for 2.3 roms. you should follow the instructions that were written by the rom maker, for the rom your trying to flash
Click to expand...
Click to collapse
Know that now! lol The instructions for Serendipity indicated I didn't have to go back to stock. But I just wasn't sure. So I figured I'd go ahead back to stock just to "be safe." That worked out well!
speedy_11 said:
(side-note if you have read and read like you said you should have had come a cross some of this.)
Click to expand...
Click to collapse
Yes, you are correct. And I deserve any amount of "stupid newb" criticism you can heap on me.
For2ndtwin said:
Which Cognition were u on ? And which Odin did u use ?
Click to expand...
Click to collapse
Which Cognition? Uhm... I don't recall. Whatever was the newest version when I installed it nearly 3 months ago.
I used the Odin One-Click. The filename is I897UCJF6-final-OCD-REV0. When I run it, the title bar says Odin3Execution_v1.0.
For2ndtwin said:
And since u can still get into Download mode u can relax a little, cause that's a good thing.
Click to expand...
Click to collapse
That's what I keep trying to tell myself...
prbassplayer said:
Lol relax If the phone shows any signs of life, that means it can be fix (usually). Now if the phone after odin doesn't want to turn on THEN your bricked. Since your phone is a newer build and they have been known to not always like jf6 Odin I suggest you try this KB1 odin. Best of luck
Click to expand...
Click to collapse
Thanks! I'm reading through the threads y'all linked to and I'm sure I'll be back with questions. This whole Odin thing, for one, has me confused. There's at least a dozen different versions available from samfirmware.com, there are different versions of the one-click (like the Designgears 2.2 one? Should I try that one?), then different "full" versions with different instructions ("only use the pda button," "use this pit file", "don't use a pit file", etc...) I'm trying my best to make sense of it all. I was in full-blown panic mode yesterday and trying to read through a dozen different threads at once. Maybe today I can slow down a bit, take a breath, and get this figured out.

The one click I linked should get you to stock. Atleast so you have a funtional phone. There is only one true odin with different versions (1.1 1.82 etc) one clicks r simplified odin that will only flash something specific like 2.1 jf6 or 2.3.3 kf1 to name a few. Samfirmware.com uses the actual odin as it supplies packages for it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

prbassplayer said:
The one click I linked should get you to stock. Atleast so you have a funtional phone. There is only one true odin with different versions (1.1 1.82 etc) one clicks r simplified odin that will only flash something specific like 2.1 jf6 or 2.3.3 kf1 to name a few. Samfirmware.com uses the actual odin as it supplies packages for it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Ok, another sucky thing is I'm on satellite internet and already dangerously close to being FAP'd. I've got to run into town this evening and will try to find some free wifi so I can download those things. Until then... it's just reading threads.
One quick question... that's a one-click you linked to? Posts 33 and 34 say to use regular Odin, not one-click. They provide a link to download regular Odin. Is the I897UCKB1-homeBinary.tar file part of the package I download from the link in the first page? The one-clicks I've downloaded have just been an .exe file.

HeathicusF said:
Ok, another sucky thing is I'm on satellite internet and already dangerously close to being FAP'd. I've got to run into town this evening and will try to find some free wifi so I can download those things. Until then... it's just reading threads.
One quick question... that's a one-click you linked to? Posts 33 and 34 say to use regular Odin, not one-click. They provide a link to download regular Odin. Is the I897UCKB1-homeBinary.tar file part of the package I download from the link in the first page? The one-clicks I've downloaded have just been an .exe file.
Click to expand...
Click to collapse
Because I'm a derp and didn't read it well. Regardless its the package files for stock KB1 use regular ODIN for it. Stick it in PDA. It doesn't have bootloaders so the possibilities of hard bricking are very low xD. My mistake for saying it was 1 click sorry xD

Ok, thanks. I'll post an update tonight after I get back home.

SUCCESS!!!
I now have a fully functional phone running what appears to be stock 2.2 firmware!!
THANK YOU!!!!
However... I can't seem to get into recovery mode. When I hold down all three buttons, it looks like I'm stuck in a boot loop again (ATT World Phone screen flashes). If I release the power button keeping the volume buttons held down, the phone just boots as normal. Is there a fix for this?
I still have all the folders for my old apps on the internal memory card. Can I delete these manually? I'd like it to be back to truly stock settings and start all over. Is that what the "Master Clear" in Odin is for? I didn't see that option in "regular" Odin.
I did get it rooted with Super-One-Click.

Ok, this is where I'm at.
Stock Foyo working phone.
Can't boot into recovery using volume & power buttons.
Rooted with Super One Click.
Installed Superuser.
Installed Rom Manager. At least now I can boot into Recovery Mode through the option in Rom Manager.
Flashed Clockworkmod using Rom Manager. Reported success, but Recovery Mode is still stock version 3e, not 2e. So, still can't install a new custom rom.
I'm a little nervous to try anything else at this point, but really want to be running Serendipity. Serendipity says DO NOT use Rom Manager to install it.
What to do from here? I'm researching, but any pointers would be helpful.
If I install Cognition again from Rom Manager (is that possible/safe at this point?), will that replace the Recovery Mode with 2e? Or is that not related at all?

not related at all.
you should really take the 30 seconds to search for that error you get when you try to reinstall packages from 3e recovery.....it would solve your problems.....
or do it the EASY way and just ODIN a freaking kernel on it that has built in CWM.
flash your rom of choice from CWM

HeathicusF said:
Ok, this is where I'm at.
Stock Foyo working phone.
Can't boot into recovery using volume & power buttons.
Rooted with Super One Click.
Installed Superuser.
Installed Rom Manager. At least now I can boot into Recovery Mode through the option in Rom Manager.
Flashed Clockworkmod using Rom Manager. Reported success, but Recovery Mode is still stock version 3e, not 2e. So, still can't install a new custom rom.
I'm a little nervous to try anything else at this point, but really want to be running Serendipity. Serendipity says DO NOT use Rom Manager to install it.
What to do from here? I'm researching, but any pointers would be helpful.
If I install Cognition again from Rom Manager (is that possible/safe at this point?), will that replace the Recovery Mode with 2e? Or is that not related at all?
Click to expand...
Click to collapse
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e. There are other ways but thats the most basic I feel.
Sent from my Samsung Captivate running Cognition 2.2 rom

capocaccia said:
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e.
Click to expand...
Click to collapse
Yeah, trying to flash the stock 2.1 is what got me in this trouble to begin with!
Pirateghost said:
not related at all.
Click to expand...
Click to collapse
Thanks!
Pirateghost said:
you should really take the 30 seconds to search for that error you get when you try to reinstall packages from 3e recovery.....it would solve your problems.....
Click to expand...
Click to collapse
I'm trying... but 1) satellite internet is frustratingly slow - not much better than dial-up at times; and 2) each path of research I take leads to several forks with several different people giving several different solutions to problems, some people saying it worked, some people saying it didn't, which leads to several more alternative solutions, some of which don't work, etc... It gets confusing after a while, but I'm trying my best to read through all the threads I wander through and to make sense of it all. Yeah, I'm a stupid newbie....

capocaccia said:
You are in 3e recovery because you are running froyo. Flash to the stock 2.1 eclair and that will get you back to 2e. There are other ways but thats the most basic I feel.
Sent from my Samsung Captivate running Cognition 2.2 rom
Click to expand...
Click to collapse
If you would have read the beginning og the thread you know that his phone didn't take well to jf6.

prbassplayer said:
If you would have read the beginning og the thread you know that his phone didn't take well to jf6.
Click to expand...
Click to collapse
There are more builds of 2.1 other than jf6...
Op look at the bottom of the first post of the odin one click thread by design gears there are 2 stock firmware packages the first one is an eclair build use the full version of odin (not one click) flash that and you're good.
Or search for the work around of 3e recovery, look in the sticky roll up at the to of the general section...it'll say "e: signature verification error"

HeathicusF said:
I'm trying... but 1) satellite internet is frustratingly slow - not much better than dial-up at times; and 2) each path of research I take leads to several forks with several different people giving several different solutions to problems, some people saying it worked, some people saying it didn't, which leads to several more alternative solutions, some of which don't work, etc... It gets confusing after a while, but I'm trying my best to read through all the threads I wander through and to make sense of it all. Yeah, I'm a stupid newbie....
Click to expand...
Click to collapse
funny thing, that STICKY section we have at the top of the forum....
theres this one called a 'STICKY ROLL-UP', not to be confused with fruit roll-up.
http://forum.xda-developers.com/showthread.php?t=1161102
all the info you need is located within it.....oddly enough

Pirateghost said:
funny thing, that STICKY section we have at the top of the forum....
theres this one called a 'STICKY ROLL-UP', not to be confused with fruit roll-up.
http://forum.xda-developers.com/showthread.php?t=1161102
all the info you need is located within it.....oddly enough
Click to expand...
Click to collapse
Yes, I tend to rely to heavily on the search feature and overlook sticky threads. Thanks for the reminder.
The "Fixing 3e" methods listed in this thread don't seem to be working for me. First method (the script) gives me an error. Tried with Win 7 64bit, and 32bit (two different computers). Yes, phone drivers were installed. Second method (manual copying of the file) doesn't work. When using Terminal Emulator to execute the command I get the message "Operation not permitted." When using ES File Explorer with Mount file System as writable checked in the settings, I get no errors or complaints... but nothing has changed when I boot into recovery.
Still working on it. Thanks for the pointers.

why dont you try one of the ODIN KERNELS that will add CWM for you? why are you wasting your time running in circles for nothing?
put phone in download mode
open ODIN, add the kernel into the PDA slot
connect phone
flash kernel
now you have CWM and can flash any 2.2 rom you want

Pirateghost said:
why dont you try one of the ODIN KERNELS that will add CWM for you? why are you wasting your time running in circles for nothing?
put phone in download mode
open ODIN, add the kernel into the PDA slot
connect phone
flash kernel
now you have CWM and can flash any 2.2 rom you want
Click to expand...
Click to collapse
After softbricking (is that the right term?) my phone with Odin, it makes me a little nervous. (Of course, I also recovered my phone with Odin, so maybe I shouldn't be nervous...).
This running around in circles...? We'll call it "education"!

Voice not working afater flash back to stock using Odin

I have a Captivate (model 1012) and was running Andromeda 3.
I guess the short version of this is as follows.
Wanted to flash back to stock Froyo from Andromeda.
First tried using Heimdall but failed 1/2 way through resulting in the dreaded Phone__!__PC icons.
Was unable to 3 button to download because my phone does not support it, so I used the 100K +1K ohm resistor "fix" which got me back into download mode.
Then used Odin3 One-click to reflash and applied the update.zip that it requested.
I am at the point where I can use Kies-mini to update to 2.2 which I have not done yet.
Everything is working just great except that when I make or receive a phone call, the person calling cannot hear me and I cannot here them.
It rings on an incoming call, I answer but I cant hear them and they cannot hear me.
One thing I do notice, is when I place a call and hit the speaker button, it turns green like the speaker is on, but I cannot hear it dialing like I used to.
After updating via Kies, the firmware version is 2.2 and baseband is I897uckb1.
Should I try to reflash or try a different modem?
Any suggestions?

Try re-downloading Odin 1click, verify the file size, then run it again. At that point, try the phone out to see if it has sound during calls.
I'm not sure why you're using Kies to go to 2.2....and your post is a little confusing. At one point you said you did not update to 2.2, then later you said it was on 2.2.
My bet is you just got a bad flash. Try it again, and you should be good to go. Heck, a factory reset might even do the trick.
Sent from my Cappy using Swype and my finger.

The problem is your modem. Replace it with one that is not an i9000 modem
Sent from my HTC Desire HD

Yes I agree. Sounds more like a modem issue than anything else.
One way to test would be to flash back to Andromeda and see if things start working right.

Wouldn't the Odin1-click put everything on new? PRL, SBL, kernel, modem and ROM?
Sent from my Cappy using Swype and my finger.

OwenW71 said:
Wouldn't the Odin1-click put everything on new? PRL, SBL, kernel, modem and ROM?
Sent from my Cappy using Swype and my finger.
Click to expand...
Click to collapse
yes. but he didnt actually use the real one click, because he indicated that he had to use a .zip file for it.....

Thanks everyone for the help. Was able to flash back to Andromeda 3 and everything works just fine. Not sure what is going on with Odin.
I would like to try it again. Can anyone recomend a good stock modem to try for my I897 just in case I get stuck again? The Odin that I used was I897UCJF6-final-OCD-REV0.exe (the update.zip I think was just for CWM).
Again, thanks for all the input.

Hello.
I'm having almost this same problem, just that I actually can hear the other people talking but they can't hear me. This problem doesn't happen when I go back to stock Eclair, there I can normally make calls and talk, but when I flash any custom ROM (I've tried Serendipity, MIUI and Darky's) this issue appears again :S
Please help me I'm really starting to lose my head
PD: Sorry for my English.

[Q] FASTY III problem/question

HI!
Just recently signed up so I can't seem to post this question in the FASTY III forum....I kind of understand why xda has this policy about new members not being able to post int he developmental forums...but still...
I recently moved from FASTY II to III...ran into a bunch of issues but I managed to resolve most of them by going through the forums. What I am having trouble with is my inability to get to the Recovery menu. I have tried to go there thru the shutdown menu, by doing the button holding trick, and even from ROM Manager... none of those seem to work for me. Very frustrating... All those mentioned attempts only bring up an ATT screen which wont go away until I reboot the phone into a normal start....
So why am I unable to enter Recovery mode?
Any help would be much appreciated. Thank you!

nycmon said:
HI!
Just recently signed up so I can't seem to post this question in the FASTY III forum....I kind of understand why xda has this policy about new members not being able to post int he developmental forums...but still...
I recently moved from FASTY II to III...ran into a bunch of issues but I managed to resolve most of them by going through the forums. What I am having trouble with is my inability to get to the Recovery menu. I have tried to go there thru the shutdown menu, by doing the button holding trick, and even from ROM Manager... none of those seem to work for me. Very frustrating... All those mentioned attempts only bring up an ATT screen which wont go away until I reboot the phone into a normal start....
So why am I unable to enter Recovery mode?
Any help would be much appreciated. Thank you!
Click to expand...
Click to collapse
in terminal emulator type su and then reboot recovery maybe it work
or may be you just flashed unsupported recovery

nycmon said:
HI!
Just recently signed up so I can't seem to post this question in the FASTY III forum....I kind of understand why xda has this policy about new members not being able to post int he developmental forums...but still...
I recently moved from FASTY II to III...ran into a bunch of issues but I managed to resolve most of them by going through the forums. What I am having trouble with is my inability to get to the Recovery menu. I have tried to go there thru the shutdown menu, by doing the button holding trick, and even from ROM Manager... none of those seem to work for me. Very frustrating... All those mentioned attempts only bring up an ATT screen which wont go away until I reboot the phone into a normal start....
So why am I unable to enter Recovery mode?
Any help would be much appreciated. Thank you!
Click to expand...
Click to collapse
I have been having the same problem recently, but not just with this rom. I have flashed many roms to my device, but it appears that almost everytime i try to flash something now, the same exact thing happens as the OP. any information on what is wrong or how to fix this would be greatly appreciated.

When you boot up...do you guys get a scrambled screen that looks like white noise?
that's caused by froyo bootloaders on a gingerbread ROM.
Not all That familiar with fasty though...dunno of the jump from 2 to 3 was froyo to ginger, just a guess.

studacris said:
When you boot up...do you guys get a scrambled screen that looks like white noise?
that's caused by froyo bootloaders on a gingerbread ROM.
Not all That familiar with fasty though...dunno of the jump from 2 to 3 was froyo to ginger, just a guess.
Click to expand...
Click to collapse
Sometimes this happens, but i am usually still able to use the rom after i wait for awhile. Recently it just gets stuck at the ATT logo screen and does nothing else.

HERE is a package containing JUST the ginger boots.
MAKE SURE YOU HAVE A GOOD PHONE/PC CONNECTION, FLASHING BOOTLOADERS IS THE ONLY WAY TO TRULY HARD BRICK

studacris said:
HERE is a package containing JUST the ginger boots.
MAKE SURE YOU HAVE A GOOD PHONE/PC CONNECTION, FLASHING BOOTLOADERS IS THE ONLY WAY TO TRULY HARD BRICK
Click to expand...
Click to collapse
i just tried it with a solid connection and it almost instantly said failed in the red box. now i cant turn it on or get to download mode so im pretty sure it is hard bricked. is there any way you can help me with this?
EDIT: False alarm, i can still get to download mode so i can ODIN back to stock, but i do not know if i should risk it again

Whew that was close.
You can flash to stock using a bootloader less package, that way if it fails it can't hard brick.
Then if that works, find an entire stock gingerbread package with bootloaders included, and flash that instead of just the bootloader one click. this again, will involve risk, but full Odin package seem to work better on some phones than one clicks do.

I tried to flash the bootloader again and it succeeded. i then proceeded to try and flash Fasty KK4 v1.1 and once again i was stuck at the ATT logo. For some reason with every rom i flash, when the logo pops up, it starts dim and then get bright. After it gets bright, it stays that way and it is a real pain not being able to use custom roms anymore.

If you have the GB bls just make sure you follow LL's instructions in the OP for Fasty. I had the same issue, but it was me mistake for not following the istructions properly

studacris said:
When you boot up...do you guys get a scrambled screen that looks like white noise?
that's caused by froyo bootloaders on a gingerbread ROM.
Not all That familiar with fasty though...dunno of the jump from 2 to 3 was froyo to ginger, just a guess.
Click to expand...
Click to collapse
i DO get a very colorful white noise screen whenever it boots up ...the screen goes away once it fully reboots....I wondered about it but just assumed it was a quirk of the FASTY III package...
Is Rom Manager a froyo based app?

No, ROM manager is poop. Not implemented on galaxy devices properly, and won't work past eclair, and even them it was severely limited to just downloading an update.zip to your sdcard...which you could put there manually with out having to root...
FORGET ROM MANAGER EXISTS

studacris said:
No, ROM manager is poop. Not implemented on galaxy devices properly, and won't work past eclair, and even them it was severely limited to just downloading an update.zip to your sdcard...which you could put there manually with out having to root...
FORGET ROM MANAGER EXISTS
Click to expand...
Click to collapse
Really? Rom Manager helped me a lot until this Fasty III installation....even in my previous rom Fasty II it worked fine and did great for backing up and restoring backups....saved my asss a few times with those restores lol....But if this program doesn't work for fasty III what comparable program can I use?
Also I still can't intorecovery mode...nothing works...I even tried using ADB and Droid Explorer....nothing seems to get it into recovery mode...
Am I going to have to flash back to stock ROM and try reinstalling fasty iii again? This seems all so tedious lol...
OR is there a way for me to flash back to Fasty II without having to go back to stock rom? or without having to access the recovery screen?
Thank you^

All that backing up and restoring you did with ROM manager can be done in cwm recovery and that's what you should use from now on. No app needed at all.
Follow the instructions I've already provided in this thread. You'll either need Odin to flash the gingerbread bootloaders,
or to go back to a froyo firmware, first flash a froyo kernel with Odin and THEN the froyo ROM. stock isn't needed.
Recovery in a gingerbread kernel is completely inaccessible with froyo bootloaders.

studacris said:
All that backing up and restoring you did with ROM manager can be done in cwm recovery and that's what you should use from now on. No app needed at all.
Follow the instructions I've already provided in this thread. You'll either need Odin to flash the gingerbread bootloaders,
or to go back to a froyo firmware, first flash a froyo kernel with Odin and THEN the froyo ROM. stock isn't needed.
Recovery in a gingerbread kernel is completely inaccessible with froyo bootloaders.
Click to expand...
Click to collapse
Thank you for the info!
Looks like fasty III is a GB based mod after all...I guess I should read up more on the rom before installing lol....I did not expect the dev to go from froyo to gb -_-
I was thinking of using your previous post for the one click gb bootloaders only....but it seems a little iffy and I can't afford to hardware brick the phone lol...
Makes me wonder tho...is it really THAT risky to flash bootloaders? It would make things simpler if i could just flash the gb bootloaders and go from there....

the whole flash should take less than a minute, where the actual writing takes only a few seconds...but if you were to lose communication in that awful window then it would be bad day.
But that is a small window, and if you have never had connection issues you should be ok if Odin tends to be iffy, you van try heimdall I've heard that works better for some.

Still haven't tried flashing the bootloaders because i'm scared of the possibility of hard bricking my phone... If worst case scenario was to happen and it gets hard bricked....are there any options to restore that phone? or is it just paper weight after?
Also until I flash those bootloaders there is no way to back up my phone or anything?
Thanks for all ur help btw!

another issue i am having is that the phone seems pretty laggy after installing this rom...even with tegra overclock premium and tweaking it up to 1252mhz 1275mv 1100mv setting...it still seems laggy when opening sms etc....is this just the results of a bad rom install? also battery life seems crappy....even after doing the battery recalibration...of course i couldn't wipe the battery stats since i cant get into recovery...

Hard bricks are recoverable by a hardware modification known as unbrickable mod, search for user Adam outler, or go to mobiletechvideos.com they both offer this service if you're not a soldering expert.
Battery recalibration does NOTHING the stats are reset everytime you charge to 100, and besides that they don't calculate your current battery level, just what's been using it, its what's used in settings> about phone> battery use. It has nothing to do with extending battery life.

oh lol...i have been reading all these threads where people are talking about how much their battery life improved after they did the recalibration and stat wipe ....well anyways I am going to attempt the bootloader flashing...I hope everything goes well! after that I want to try reflashing the fasty III ROM...
Do you have any recommendations as far as a good ROM for teh captivate? One that doesn't lag and has good gps & battery life? I would appreciate any help you can give.
Thanks!