All I get is "Searching...", continually. I changed out the antenna, same result, any suggestions? I checked the Comm Manager and phone is turned on. I don't what else to check.
jphuffs said:
All I get is "Searching...", continually. I changed out the antenna, same result, any suggestions? I checked the Comm Manager and phone is turned on. I don't what else to check.
Click to expand...
Click to collapse
try to use [LeSScro] Network Wizard to set up network . if it still doesn't help you should try to upgrade radio
The Network wizard helps you to setup the data connections once you have a connection. It will not do anything for searching the radio coverage.
You either have a broken device (did it work recently)? Or your SIM card is not valid in the networks in reach. Check both with other devices and SIMs at the same place.
tobbbie said:
The Network wizard helps you to setup the data connections once you have a connection. It will not do anything for searching the radio coverage.
You either have a broken device (did it work recently)? Or your SIM card is not valid in the networks in reach. Check both with other devices and SIMs at the same place.
Click to expand...
Click to collapse
I hve used three different MB, two different antennas and two different SIM cards with the same result. What am I missing?
When debugging this, you must exclude potential problems one by one.
Always do a hard-reset before digging deeper. This ensures a stable base for further investigations.
Can you prove that any of the MB works ok? Did they work in other devices? Mind that Hard-Reset has to be done per MB!
Are you sure that the SIMs are still accepted by the operator? Put the SIM cards in any working mobile phone and check if they are OK.
The Antenna assembly is usually very simple I doubt that there is anything broken.
Other options:
You may simply have bad coverage in your area and the Wings may not be able to connect to the network. Try from other places where you have good reception with other devices (with the SAME operator, of course).
The Radio partition has no valid software or the related data parts are corrupted. To solve the software part, upload the latest official ROM on the device.
Related
Hello All,
I have a problem with my kaiser, it started i think 2 weeks ago. I have vodafone (netherlands) with a data connection account (hsdpa). Now is the problem that i can't use umts (3g) or hspda. The only thing i can use is gprs. It looks like the modem or something is broken. But that is a kind of weird because (if i understand correctly) its al the same chip (wifi and so on). When i open internet explorer it begins to connect a gprs, 3g data connection. But it can't connect, than you can see a X by the synchronisation arrows (on the top of the screen). And after a few secconds it comes with a message that with the current settings there can't be a data connection. But if seen other messages as well ( the modem on the other side disconnected the connection) The weird thing is that i tried my sim card in my friends kaiser there it works fine, so it have to be my kaiser.
Ok what i tried:
I have a dutch htc kaiser (not vodafone branded or anything)
I use the latest dutty rom, but i tried the orriginal rom and different roms to see if the problem was the rom or something.
When i let the 3g mode on i can see that the phone finds a 3g connection (to call over umts).
Is there any program or tool or something so i can test the modem?
Or does anyone know a sollution for me, i will be very greatfull!!
Ok i tried a other radio to, maybe this was the problem. But it didn't, at this moment i have the default htc dutch rom (who was on the phone when i got it). I searched the net for the same problems, what i found was that this error could be happening when you have your wifi connection open, but i have wifi disabled. The phone is still receiving a 3G connection, but after a few secconds the 3G icon is gone and the failed synchronisation icon (two arrows with an X) is visible. than you can see that the phone is reconnecting. and then if i want to connect to the internet the same story as above is happening.
When i search internet i couldn't find an tool to test the chip/modem.
Because i have it spl unlocked i can't return it for rma, is it posible to restore the default spl?
Hi,
unfortunately I have the same problem with my Kaiser. I have an unbranded German version and it worked fine with all bands (GPRS, EDGE, UMTS(3G) and HSDPA) but since two weeks ago its only working with GPRS and EDGE mode. I have to change band-selection from AUTO to GSM in order to make or receive any calls.
I didn't do any ROM flashing, everything remains the same as the device was shipped.
I assume, that something is damaged but I have no idea how it could happen or how I can find out exactly what is causing the problem.
Since there is still warranty I'll return my Kaiser soon.
seems to be a widening problem
hi,
it seems many have the same issue, see my other posts for linkage to some other threads on it...no solution yet as far as I can tell.
rich
p.s. moderators any chance to link these threads and make a sticky?
ok, thanks for your reply. I've allready found another thread for that issue. But im still uncertain if its a bug in my device or a combination of a bug with a provider specific (Tmob Germany) problem or if its only the provider to blame for??
Chris
I have a slightly different problem. I don't have 3G in my area but only EDGE. Now the problem is that I cannot get speeds higher than about 80 kbs with EDGE.
Now when I put the same SIM in my Touch I can get speeds upto 200 kbs. So obviously this is not a problem of my service provider but rather something wrong with the device.
I have repeated the trial by swapping SIMs a number of times but with similar results all the time. Really don't know of a solution. Will appreciate any help.
haven't seen the edge problem
hi,
my edge speeds seem to vary more by location...I measure up to 200+kbs but have seen it go much lower too. there is a location where I can still get 3G working and i measured up to 1.7mbs for downloading! At my home location it is sporadic edge only and I can't even always get to speakeasy.com to test it, sometimes the speedtest says its not licensed..switching to wifi and it works. My guess is some needed ports are getting blocked by at&t at times..because sometimes it works. I brought all this up with at&t..they are taking some charges off this month and switched me to a cheaper plan too...so they at least seem to care even if they can't quite fix things yet.
rich
Hello all,
I have searched these forums high and low, but could not find a solution to my problem. I have a Kaiser which I use on the Canadian provider Fido. Since late 2004, Fido is a wholly owned subsidiary of Rogers, another Canadian wireless provider. Fido and Rogers now share one same network: Rogers'. My problem is that my Kaiser, having a Fido SIM in it, seems to always think it is roaming because it is connecting to the Rogers network. This causes me a problem since I cannot tell my phone to only download when on my home network, otherwise I would never be able to download anything (since I am always roaming). If I tell my phone to download even when roaming, I cannot control my usage when I actually am roaming in another country. I know there must be some kind of setting somewhere that I can adjust to make my phone think it is not roaming while connected to Rogers' network, I just don't know what it is. No matter what ROM I try, I can't get rid of that pesky "roaming triangle"! My gf's phone, a Samsung Jack, does not think it is forever roaming, so I know it is possible.
Does anyone have any insight on this?
Thanks in advance!
Dom
Hello there.
I have used my kaiser with Saudi Sim card, Lebanese Sim card, Jordanian Sim card and now FIDO sim card. Ive always had this triangle and has never affected my data plan.
bteljuice said:
Hello there.
I have used my kaiser with Saudi Sim card, Lebanese Sim card, Jordanian Sim card and now FIDO sim card. Ive always had this triangle and has never affected my data plan.
Click to expand...
Click to collapse
Me too, I even had my roaming turned off by Fido for some time and the triangle was still there.
Thanks for the input, guys. I know that the roaming icon will not prevent me from accessing 3G data. What it does prevent me from doing, though, is differentiating between "real" roaming (i.e. in another country) and "fake" roaming (i.e. on the Rogers network). As it stands, all settings which can be set to "use 3G data only when not roaming" are ineffective as I would never be able to download anything if they were enabled.
I hope that clears things up. And I hope that someone smarter than I am has a solution for this problem.
Thanks again!
Hello, I have the exact same phone on the exact same fido network and have the roaming triangle as well. It does not affect your data/voice plan at all. (ie. if you are in the Canada, you will not be charged for roaming). This is all explained in the following link:
http://howardforums.com/showthread.php?t=837503
Essentially the gist of it is that you are "roaming" on the rogers network, but since they are the same company, it doesn't matter or affect any of your plans. I have used my 6GB data plan from Fido with no extra charges.
It does effect some programs that do provide options for disabling web traffic when roaming (ie. hotmail push e-mail from windows live) as these programs will always think you are on another network.
What I have done is, predominantly, I use my wifi connection where available and have turned off all the "disabling traffic when roaming" options in various apps. Then in the fido internet (3G;GPRS) settings, I did not include the password. What this does is that when I connect to the internet without wifi it asks me for my password which I then enter to connect. Definitely mildly inconvenient, but prevents me from 'accidentally' connecting to the internet when in the US.
Thanks ibhimani.
I have taken similar measures to prevent roaming fees, but I use MoDaCo's NODATA app, instead. Basically, it allows me to completely turn off all cellular data connections (WiFi remains intact) while I am away.
Still, I don't think this is a real solution; it is a workaround at best. I know there is a way to force the phone to recognize the Rogers network as a "Home" network since my gf's Samsung Jack does not claim to be roaming at all times. I will try to look through the registry on the Jack to see if there is some setting I can tweak to achieve the desired effect. I'll let you all know if I find something.
That would be great. Thanks in advance.
No luck!
Hi all,
After a little research in the registry of my gf's Samsung Jack, I've found that the way the network is handled on it is different than on our HTC. The Samsung uses something called MITSMan.exe (Mobile Intelligent Terminal by Samsung Manager) which can identify the network correctly on her phone, but not on ours. Unfortunately, this is not reusable for us. The search continues. Hopefully, a WinMo HTC device will launch on Fido sometime soon so I can reuse something from it.
If I find anything else, I'll post it here.
I have a Nokia e62 and the Samsung Jack from Fido. Both these phones do not show the roaming icon. Must be some sort of custom firmware brewed for Fido by the manufacturers.
BTW - I am now using a Samsung Omnia II. This shows roaming too.
hameedx said:
I have a Nokia e62 and the Samsung Jack from Fido. Both these phones do not show the roaming icon. Must be some sort of custom firmware brewed for Fido by the manufacturers.
BTW - I am now using a Samsung Omnia II. This shows roaming too.
Click to expand...
Click to collapse
Hi hameedx,
With a Samsung Omnia II, you may be able to make a change to the registry to make it think you're on the home network, if it works like the Samsung Jack. On your Jack, search through the registry for something called MITSman. There should be a value corresponding to Fido's carrier code (MNC-MCC), which is 302-370 (or 302-720, which is Rogers'). It may actually be easier to search for these values. If the Omnia also uses MITSman, then you might be able to make the registry entries on it look like the ones on the Jack. If you need more detail about the registry entries, I could get them when I have access to a Jack again.
I searched the Jack's registry for anything with 302 720 370 72 37. Couldn't find any meaningful entry. Perhaps it is a DLL that we need to replace?
I believe that the Fido Samsung Jack has roaming indicator disabled completely. I used a Telus SIM in the Jack and does not show roaming. The Telus SIM shows roaming when I put it in other unlocked phones.
Hi,
I would like to be able to modify my AT&T radio and change the default Mobile Network Code for my carier, is there any software to make easy to modify the ROM file ?
Thank
I'm not quite sure I understand what you're asking, but a radio will work on various different networks, depending on which SIM card you have in the phone. So I'm not sure that it's in the radio that you need to look.
What is it that you're trying to achive exactly, why do you want to change this code ?
Well, here is my problem;
I bought a Tilt 2 on ebay, and I also get an Unlock code for it. I have inserted my Bell SIM and the phone work correctly. I have configured the APN setting correctly and now I have internet without any problem.
The only bad thing is that the phone always think i'm in roaming, but that's not true. I have to deactivate all setting about roaming check, it's not a big thing but If I got to USA I will be charged for real roaming. and another downside is that many application pup info about roaming and data charge.
I'm searching since couple days to found a solution, and I'm pretty there is one but I have not enough knowledge on programming stuff. I've look all every registry in my phone and no one can't correct this ''roaming'' situation.
That's why im turning to Radio, since this phone is an AT&T, it's propbably seaching to compare SIM network provided and ROM network. I've found an interesting site about MMC/MNC http://en.wikipedia.org/wiki/Mobile_Network_Code
and found that the default network for AT&T is 310-410. Here in Canada We have bell and telus that use same technology then AT&T (UMTS 850 / UMTS 1900).
I would like to change the default ''home'' network code to 302-880. because my Sim Provided IMSI is 302-610 (Bell).
So to make it short. I want to change the default ''HOME'' network 310-410 to 302-880 so the phone will not be in a roaming profile.
Hope that someone can help me, and I'm pretty sure many people will appreciate this fix.
Thank You.
I don't know much about this, but surely it's your SIM card that is providing this code ? Since I could buy an unlocked Tilt 2 and put my own SIM card in it, and use it fine here in the UK on a UK network.
I can't believe that your phone thinks it's roaming just because it's a Tilt 2.
Yes, I found in my registry ProvidedIMSI="302610" that is the SIM registred network 302610 Bell HSPA network. So my SIM is telling the phone to use this network, but there is something in the phone that say it's roaming and not a home network. and I need to find and change this.
I'm not the only one in this situation and i would like to find a fix.
i have no knowledge about this only thing i can think of at the moment is just change the current radio version and flash a new rom. the latest version for radio is
4.49.25.95
and is found here ------> http://forum.xda-developers.com/showthread.php?t=549939
follow the right steps. [:d]
best of luck
Yes, I've updated the Radio to the latest version and still have the problem of ROAMING. i've try 2 old radio and always got the roaming icon.
Any other input will be accepted!!
Thanks
BiOs2k said:
Yes, I've updated the Radio to the latest version and still have the problem of ROAMING. i've try 2 old radio and always got the roaming icon.
Any other input will be accepted!!
Thanks
Click to expand...
Click to collapse
I read somewhere that roaming starts when you are out of your area code range.
But you can try this too
go to ------> setting ---> personal ------> phone -------> Network (in the bottom tabs)
In the network tab click Find Network and make sure it is the same network you are using.
Network selection should be "Automatic".
Now in next tab BAND
select network type to "GSM" and GSM/UMTS band to "Auto".
Try this and let me know if this work else i will ask somebody knowledgeable like Sir Phunkee
the show stopper said:
I read somewhere that roaming starts when you are out of your area code range.
But you can try this too
go to ------> setting ---> personal ------> phone -------> Network (in the bottom tabs)
In the network tab click Find Network and make sure it is the same network you are using.
Network selection should be "Automatic".
Now in next tab BAND
select network type to "GSM" and GSM/UMTS band to "Auto".
Try this and let me know if this work else i will ask somebody knowledgeable like Sir Phunkee
Click to expand...
Click to collapse
I've play with these setting and nothing seem to work.
But maybe I found something interesting.
I've just test the phone with a ROGERS SIM card and I get 3G signal and i'm NOT in roaming mode..
Now, What that mean ? Rogers 3G is UMTS/HSPA 850/1900MHz same as BELL.
Why it say Roaming when phone is connected to BELL with BELL Sim and not on ROGERS SIM??
Could someone help me with that ? fix, cab, anything ?
Thanks
rooming
Hi
I do not know think you want to do with your tilt 2
Why you don't do a hard SPL and install a cocked rom !! as energy
I am using a tilt purchased from AT&T without contract
I get a unlock cod from the internet then I do a hard SPL it and install the energy rom in, is work like a charm with Rogers, without any problem( only the gps wish I never try
Perhaps this is can resolve your problem you should try
thanks
Already done Cjoco My Tilt 2 is Unlocked and Hard-SPL with latest EnergyROM.
Like I said before, SIM ROGERS work like a charm in my phone, No roaming warning. but with BELL and TELUS SIM I get the Roaming notif but it's not true, Im connected to BELL and VOICE,DATA,etc. work #1.
People say that it work with ROGERS because this carrier have a fallback signal if 3G is not available, with BELL if I lose 3G signal my phone doesn't work.
BiOs2k said:
I've play with these setting and nothing seem to work.
But maybe I found something interesting.
I've just test the phone with a ROGERS SIM card and I get 3G signal and i'm NOT in roaming mode..
Now, What that mean ? Rogers 3G is UMTS/HSPA 850/1900MHz same as BELL.
Why it say Roaming when phone is connected to BELL with BELL Sim and not on ROGERS SIM??
Could someone help me with that ? fix, cab, anything ?
Thanks
Click to expand...
Click to collapse
then i think problem is with your sim card not with your phone. Just get your sim card replaced and i am sure the problem would be resolved.
the problem may be with his sim card, but im not sure replacing it will fix anythibng. im also with bell and have the same problem on my fuze.
bios2k, how old is your sim card?
bobzero My SIM card is 2 Week Old. so, i'm not sure it because my SIM is old.
I'll give a call at tech support @ BELL to see if they know why it doing this. I'm not sure if they will be enough good to explain this situation.
I've read last night on many forums the RILPHONE.DLL could be a possible cause of our problem.
In my config I can select GSM(850,1700) + UMTS(850,1700) but there is no option to select UMTS only. so maybe the phone is searching for GSM first (rogers) that's why when I insert a ROGERS SIM my phone is not roaming.
Is there a way I can extract RILPHONE.DLL for our EnergyROM or Stock Tilt 2 rom. Maybe I can ask a Programmer to take a look at this DLL to see the code.
I'll let you know.
I've just talk with BELL technical support and they have no idea why I'm the phone say it's in ROAMING. I've talk to the billing department and they say I don't have any ROAMING fees, so nothing to worry about..
Now, I'm still at the same state = no solution
Same here.
I was checking around and found many got this problem, including BBs. Now, some claimed that after upgrading the O/S for his BB, it went away. Another person with different device upgraded his O/S and started having that problem, and it wasn't there with stock ROM.
Make me think it has to do with the software side of thing and nothing to do with SIM or radios. To pinpoint what is causing it, can be a tough task though.
scooper True, Hard task for people that don't know much about programming ROM and files, but maybe we can have help from other that wanna look at our problem.
I'm available to test if someone want to Help us .
BiOs2k said:
scooper True, Hard task for people that don't know much about programming ROM and files, but maybe we can have help from other that wanna look at our problem.
I'm available to test if someone want to Help us .
Click to expand...
Click to collapse
You should try to change the radio and rom of your phone. Make sure to Task 29 b4 flashing. Another thing to make sure is you use the right radio, i mean the specific radio for telus, t-mobile or att.....
Wrong radio can also cause such problems.
I have the same issue with my Unlocked Tilt2 on Telus. I found a lot of people with unlocked winmo devices on bell/telus complaining of this problem and never have seen a solution. People say that a Fido sim will do the same thing. Only Rogers sims seem to not show roaming. PLEASE post if you find the solution or even cause of this.
I just did task29 and reflash ROM. I soon as I have the main menu Roaming Icon appear on top just beside or 3G.
Damn!! still stock with this roaming issue
anyone have Q's ?
Hello.
Having problems with my I8190N. About 2-3 days a go it suddenly lost ability to connect into internet. I can switch data connection on or off, it doesnt make any difference. I have tried to reflash various ROMs and it's all the same, no internet. I get the usual signal bars but no H/G/E marks.
It did not happen after flashing, had CM11 on it for days and I could connect Internet just fine. No carrier limitations either, I can make calls out and same SIM in my old phone can go to internet.
Should I flash the stock ROM/bootloader back and RMA it? Or is there something else I can do? (perhaps known issue and solvable on my own)
Phone is fairly new, bought it in August as brand new.
i suppose APN settings are correct?
you can try to flash another baseband to try with it, what is yours current baseband?
basebands you can find here for N version, XXAMJ ist newest and working for me...
I had the same problem a couple of days ago. It turns out that my problem was the simcard, have you tried to put another simcard in your phone and see if it works?
I have this problem, same with two phones and two SIM cards, both phones are ZTE, both problem SIM cards are on Vodafone, both phones have no problem connecting to data via t mobile sim? This leads me to believe that voda data does not work on zte phones, apn details are correct. Does anyone knowa fix?
finally sorted it........... f'd around with a few different apn's and even phoned up talktalk(same as vodafone network) who confirmed I had the right settings which I hadnt!
Found the correct settings on the geeksquad website. seems i didnt need to bother filling out some of the fields and then wham internet connection straight away!
Sent from my ZTE V967S using xda app-developers app
For the last weeks.. I have been trying to get this phone working with T-Mobile..I had unlock the sim card and now running badboyz 4.3 rom. 1.3
After unlocking the sim card and setting up the apn, selected T-Mobile from the available networks and it will connect. But when I go to work, I will lose signal every few block, and need to search for available network again and wait to select t mobile again.
I had try to use the t mobile sim card on my old phone and everything will works fine with no signal lost.
Can anyone please HELP!... I been searching and looking for an answer for more than 2 weeks..but no resolve.....
Thanks
Sim Unlock
lazybozz said:
For the last weeks.. I have been trying to get this phone working with T-Mobile..I had unlock the sim card and now running badboyz 4.3 rom. 1.3
After unlocking the sim card and setting up the apn, selected T-Mobile from the available networks and it will connect. But when I go to work, I will lose signal every few block, and need to search for available network again and wait to select t mobile again.
I had try to use the t mobile sim card on my old phone and everything will works fine with no signal lost.
Can anyone please HELP!... I been searching and looking for an answer for more than 2 weeks..but no resolve.....
Thanks
Click to expand...
Click to collapse
How did you get the SIM unlocked in the first place?
lazybozz said:
For the last weeks.. I have been trying to get this phone working with T-Mobile..I had unlock the sim card and now running badboyz 4.3 rom. 1.3
After unlocking the sim card and setting up the apn, selected T-Mobile from the available networks and it will connect. But when I go to work, I will lose signal every few block, and need to search for available network again and wait to select t mobile again.
I had try to use the t mobile sim card on my old phone and everything will works fine with no signal lost.
Can anyone please HELP!... I been searching and looking for an answer for more than 2 weeks..but no resolve.....
Thanks
Click to expand...
Click to collapse
This is probably because T-mob covers only particular places the frequencies this phone uses http://theunlockr.com/2013/07/05/htc-one-sprint-specs/ vs t-mob https://t-mobile.jive-mobile.com/#jive-document?content=/api/core/v2/documents/4988
Sent from my HTCONE using Tapatalk
Is there any solution for this problem ?
Is there anything I can do to fix this problem ? (different rom or radio...etc..) Or I have to give up the phone... Cause it is too much headache to "searching for network" all the time and miss all the call with no service on the phone without knowing..
Thanks
lazybozz said:
Is there anything I can do to fix this problem ? (different rom or radio...etc..) Or I have to give up the phone... Cause it is too much headache to "searching for network" all the time and miss all the call with no service on the phone without knowing..
Thanks
Click to expand...
Click to collapse
well, I am not an expert on the tmobiles network, but going by what lazybozz, said, I seem to remember tmobile using different bands than the other carriers, so what you may be experiencing, is the phone being in the vicinity of multiple towers, but not all of them are within the band that the phone supports. So its like the phone doesnt even see those towers. On a side note, this issue caused alot of chaos for those who unlocked iphones about 3 years ago, they could use EDGE on tmobiles network but not 3G, so i assume this is a similar situation. So long story short, yeah you probably cant fix the problem, unless you get a quad band phone. I could be wrong, but it does sound like a logical reason for the issue you are having.
as elvisypi said above, Its the freq that T-mobile operates on in that area. If your getting T-mobile at all in the states then you have already flashed a radio. However flashing any other radio is not going to give you the freq that tmobile uses, Its not a software limitation its a physical hardware limitation.
Thanks for your reply, do you know any app out there that monitor and alarm you when the network or signal is lost ? That works with 4.3 ?That way at least you know the phone is offline ... some of the apps I tried is anything at all ...
Thanks
Have you tried an app like tasker? Its essentially an automation app. It isnt jist for your use. Its for many different functions. Jist look on the app store for tasker. That might help
Sent from my HTC Butterfly s using Tapatalk