Database Develop

[Q] odin successful but stuck on boot

hi XDA members ..
am kinda new on this stuff "noob".
i bought my sgs (GT I9000) from KSA with (and am not sure) I9000JPJG8 frimware.
the whole story is that i tried to upgrade to froyo but the process didn't when well and odin was stuck. so i ignorantly pulled the usb out, and had that phone->attention-> pc sign. but i was able to get to download mode. later i noticed that i used a I9000M froyo firmware.
anyway, i read through threads about semi-bricked sgs and found that i must reflash again my stock firmware, and that's what i did.
the odin flash is successful and the phone shows the galaxy s startup screen and then that loading sign and the loop starts ( loading sign appears - disappears -appear again ..etc) i pulled out the battery and powered it on to have a Galaxy s startup screen loop also.
i can't get to recovery mode, and here the names of the firmware i used to flash:
I9000JPJG8
I9000JPJPG
I9000JVJPF
I9000UGJH2
i need the firmware to have arabic support so that's why those above where my choices, but i wouldn't mind losing arabic for z sake of my new sgs
sorry if my english is bad
suggestions???!! and thanx in advance

have you been flashing these firmwares with PIT file ??
i think thats whats needed,
try to flash stock eclair 2.2 or froyo 2.2.1 with all 3 files and 512 pit.

i tried all .pit files to no avail...
and what do u mean by eclair 2.2 , isn't it 2.1 ??! and do u mean pit512 , 513 , 803 by the 3 files or what?
thx for replying
edit:
do u recommend certain odin version because i don't know which to use exactly ?

yea sorry i mean eclair 2.1
whenever i have trouble like you, i flash JM1 in all 3 files (phone pda csc ) and 512 pit, with the repartition box in odin checked.
works a treat everytime

i tried it but it stopped in z middle and odin said (FAIL)

have you made sure KIES is closed, even in the icon tray ??
Are you using odin 1.7 ??
also try to connect your phone direct to the motherboard
if it still fails, post me a screenshot of what odin looks like before you press start

oh my .. kies was closed in icon tray but there were some kies related stuff running when i opened the tasked manager. but unfortnately nothing happened , same things are still there.
here z pic , doing the method u mentioned before
h*tp://imageshack.us/photo/my-images/696/odink.png/

right the problem is you are using a firmware compressed into 1 .tar file
remove the pit file - uncheck re partition
remove phone
remove CSC
all you want is OJP_JG9.tar loaded into PDA.

A MAJOR UPDATE ..
while waiting for replies i tried this method in this post using eugene froyo :
http://forum.xda-developers.com/showpost.php?p=10498057&postcount=14
suprisingly my phone now changed to vibrant on start-up and has z following :
froyo 2.2
baseband T959UVJK2
kernel 2.6.32.9
now that it is alive .. can i shift to z froyo 2.2 with arabic support or do u suggest that i stick to it ?

i think i'll change since everything is messed up ..
vol. buttons are reversed .. music is not played through speaker unless head-phones are used .. numerous apps crashing ..
man am soo confused

you have flashed samsung vibrant on your samsung galaxy
that is why you have these problems !
did you download a GALAXY I9000 ROM ?? if not do so now.
Flash it in odin.
If it comes in 3 files (PDA, Phone, CSC) add 512 PIT and select re-partition
If it comes in 1 .tar file. Load it into PDA and DO NOT USE PIT OR REPARTITION
hit start and done, its so simple.
you really ought to read instructions before you go flashing ROMs.

i really did but it looks like i didn't pay attention to GT I9000/M thing ..
ok thanx for z help and i'll reply back when done with z ROM

i hate to be demanding but can u give me links cause am sick of downloading wrong files ((

www.samfirmware.com
http://forum.xda-developers.com/showthread.php?t=846913

so now my phone powers off when connected with usb ... what shall i do ????

can you boot into recovery ? if so do a full factory reset and try again. and try to flash a rom in recovery (if you have 2e)
i have no idea why the phone powers off with usb.
does it do this in download mode too ??
did you flash a stock rom ?? if so what rom did you choose

i flashed eugene froyo
should i use I9000 method or vibrant method for recovery ??
i got into recovery when i flshed the vibrant rom back then .. :s
edit: a question , have i lost z root thing when i flashed the vibrant or not ?

first of all enter download mode . Try this method ( press home and volume down and insert the usb conected at pc ) , and flash darky resurection 9.2 or ezrom 2.2.1 , i think both have bootloaders , I prefer ezrom ( saved my phone after CM7 or miui )

[Q] rooted with cf no sim card detected

hey
i rooted my galaxy S I9000 with odin an the cf kernel: CF-Root-XW_DBT_JVI-v3.7-CWM3RFS.tar.
the flash worked fine, but after the reboot I get no connection to my mobile network. When I want to see the options in Mobile Network I get the message: Insert SIM card to access network services" but it is insertet correctly.
thanks for your help
I think I now know what I did wrong. I used the phone field in Odin to flash. Now with *#1234# in Phone there is written down: UNKNOWN. Is there a way to reset this to the normal version?

if you flashed the kernel as phone, then you probably didn't get it rooted successfully either.
Flash the phone file that you were using originally and it should be fixed. I think you can probably try to flash a kernel with CWM under PDA, and use cwm to get a new modem file (search around, there are a lot).
A definite solution is to just flash the entire firmware again - though if you're going that route might as well update to the latest jvu firmware or something.

rallisch said:
I think I now know what I did wrong. I used the phone field in Odin to flash. Now with *#1234# in Phone there is written down: UNKNOWN. Is there a way to reset this to the normal version?
Click to expand...
Click to collapse
Just flash back to stock ROM first using ODIN, then root it again keeping the cfroot file under the right tab!!

[Q] help me, my mini not open :(

sorry for bad english.
i tried to upgrade my mini via odin 4, i think i did somethink wrong now my phone problem is, odin is not see (adding) my mini except odin 3 vxxx, i tried to install europe rom (phone,pda,csc) but not worked, i tried to install recovery on odin 3 but not wroked again what can i do ??
by the way when i try to enter download mode on my phone at the screen writes ;
odin mode
product name gt-s5570i
custom bin down : no (0 counts)
current bin : samsung official
and when i try to enter recovery mode at the screen writes; appling multi csc and when i try to wipe data reset;
e:format volume: rfs format failed on /dev/stl11
please some one help me...

bager13 said:
sorry for bad english.
i tried to upgrade my mini via odin 4, i think i did somethink wrong now my phone problem is, odin is not see (adding) my mini except odin 3 vxxx, i tried to install europe rom (phone,pda,csc) but not worked, i tried to install recovery on odin 3 but not wroked again what can i do ??
by the way when i try to enter download mode on my phone at the screen writes ;
odin mode
product name gt-s5570i
custom bin down : no (0 counts)
current bin : samsung official
and when i try to enter recovery mode at the screen writes; appling multi csc and when i try to wipe data reset;
e:format volume: rfs format failed on /dev/stl11
please some one help me...
Click to expand...
Click to collapse
anyone ?

which rom did you flash? also if you can enter download mode then reflash stock rom and one thing make sure the rom you downloaded was for s5570i not s5570.i think you might have installed a rom for s5570 on your s5570i.

darkshadow1997 said:
which rom did you flash? also if you can enter download mode then reflash stock rom and one thing make sure the rom you downloaded was for s5570i not s5570.i think you might have installed a rom for s5570 on your s5570i.
Click to expand...
Click to collapse
i tried a lot of rom until friday, now when i try to install stock rom vith odin 3 vxxx , odin stops at writing start screen. i wan t to know this, why odin 4 can t see my phone, maybe it works with one package.
i installed via 307 but when odin finished and i started the phone at the screen writes can t mount data, rebooting and phone is stuck at opening screen.

bager13 said:
i tried a lot of rom until friday, now when i try to install stock rom vith odin 3 vxxx , odin stops at writing start screen. i wan t to know this, why odin 4 can t see my phone, maybe it works with one package.
i installed via 307 but when odin finished and i started the phone at the screen writes can t mount data, rebooting and phone is stuck at opening screen.
Click to expand...
Click to collapse
Hmmmh... try reflashing stock ROM, then go to recovery mode. Then wipe data.

[Q]Bootloop & No recovery Mode

Hello everyone ! I have a samsung galaxy s3 mini i8190
I flash CM , but i didn't like it so i tried to install with odin the original firmware.
Problem: Bootloop (logo Samsung Galaxy S3 Mini reboot infinite loop)
I can't enter in Recovery Mode, only i can enter in Download Mode
I use ODIN to try to install CWM , but still don't work..
And i have another problem. When I click start (in odin) it stops at SetupConnection, but if I disconnect & reconnect (usb) it starts flashing.
Please, help me.

Try to flash stock recovery instead of CWM.

tys0n said:
Try to flash stock recovery instead of CWM.
Click to expand...
Click to collapse
"I use ODIN to try to install CWM , but still don't work.."
I said this in the thread. If i'm wrong, please correct me.

Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.

Vladdyak47 said:
"I use ODIN to try to install CWM , but still don't work.."
I said this in the thread. If i'm wrong, please correct me.
Click to expand...
Click to collapse
Yes you did, but I asked you to try with STOCK RECOVERY instead.
It's not always a part of the official firmware package.

stenc55 said:
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Click to expand...
Click to collapse
Can you help me with the link? Flash with PDA, right? (select PDA files, connect the device and click start)
Which one is good? http://forum.xda-developers.com/showthread.php?t=2187295
P.S. : I resolved the problem with connection
P.S.2: In Download Mode i have "CUSTOM BINARY DOWNLOAD: YES (3 counts) :|
P.S.3: When i try to flash a original firmware, after device restart it's an android charging something
EDIT: Now i have a new problem: FIRMWARE UPDRAGE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN

Vladdyak47 said:
Can you help me with the link? Flash with PDA, right? (select PDA files, connect the device and click start)
Which one is good? http://forum.xda-developers.com/showthread.php?t=2187295
P.S. : I resolved the problem with connection
P.S.2: In Download Mode i have "CUSTOM BINARY DOWNLOAD: YES (3 counts) :|
P.S.3: When i try to flash a original firmware, after device restart it's an android charging something
EDIT: Now i have a new problem: FIRMWARE UPDRAGE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN
Click to expand...
Click to collapse
Download service firmware and solve all your problems
Then just flash whatever rom you'd like.

Thanks a lot tys0n ! My Phone works now!

Mine has the same problem! I flashed kernels and params as well!

stenc55 said:
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Click to expand...
Click to collapse
Solved !!! Thank you very very much, for all of u.. Worked ... Finally i can enter recovery mode and turn on my s3 mini.. . thanks XDA n really sorry for my english

stenc55 said:
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Click to expand...
Click to collapse
What if my device cant be recognised by my pc. Ive tried every pc/laptop I own with different OS. So basically I have a bootloop stuck phone with no recovery mode available and it doesnt connect to the pc. Is there any way to fix that? Or is the phone completely bricked and I cant do anything about it.
PS: I have tried installing latest samsung drivers on my pc but it still cant recognise the phone.
Have had this phone for 6 years and it was ****ing amazing. I missed this little guy and want to fix him just as a "souvenir" since it was my first ever smartphone.

recovery bootloop with N910T

Hello all developers
the problem start when my friend ask me to fix his mobile
the first look to the mobile is
when i click power on it's show Samsung logo with this word at the left top( recovery booting ... )then reboot after 2 seconds at-least
i have download the latest official Rom 5.1.1 from sammobile
N910TUVU2DOK2_N910TTMB2DOK2_N910TUVU2DOK2_HOME
after flash with odin i remember that is must complete the installation after first reboot with android logo but there is nothing happened !! its always reboot with the same word ( recovery rebooting )
I have tired to flash many Roms
Many BL
Many Modem
try to flash PIT File and the same
try Emergency with Kies and nothing changed
Kies give me this information when i put the model
PDA : OK2 / CSC : OK2 / PHONE : OK2 (TMB)
the all info about this mobile :
Model : SM-N910T
S/N : RF8FC131QYY 14.12
IMEI : 356095064430028
when i enter Odin Mode thats appear
ODIN MODE (HIGH SPEED)
PRODUCT NAME : SM-910t
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUS : CUSTOM
REACTIVATION LOCK : OFF
KNOX WARRANTY VOID : 0x1 (4)
QUALCOMM SECUREBOOT : ENABLE (CBS)
RP SWREV : S1, T1 , R1 , A2 , P1
SECURE DOWNLOAD : ENABLE
UDC START
please help me to fix it with any rom ... I can't go recovery mode but i can go download mode with ODIN

Any help please

i have the same issue but im on verizon. Also kies doesnt recognize my phone and I can't get to recovery. Any help would be appreciated. otherwise i just have an expensive paperweight.

Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0

Had the same issue i tried all kinds of roms stock and custom nothing seemed to work bought a new battery didnt make a diff now my phone is dead

noob4598 said:
Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Click to expand...
Click to collapse
Can you share PIT file for 910t? My phone is just keep bootcycle no matter what I do with ODIN, and try to flash ROM after ODIN, it bombs out, and boot cycle...
Thanks.

I am stuck with the same thing
any help would be great I am some what of a noob to this

Anyone had luck solving this problem?

noob4598 said:
Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Click to expand...
Click to collapse
Link plz

waleedy said:
Link plz
Click to expand...
Click to collapse
I'm having the same problem. I'm not getting any errors, and I found and flashed the PIT file with the stock firmware. Still no boot. It just sits on the boot up screen. No recovery, no battery icon...no nothing.