Just took my LCD density from 160 to 220 (just messing with it) and when i get past the boot screen i get a black screen, the backlights on but no display. Any ideas how to fix this? I just rooted and installed 1.1 and dont wanna lose everything!
You used LCDDensity from the Market I imagine? Just do a full reboot. On a reboot the setting is lost, so it'll be set back to normal.
I've held power down and rebooted, is there a more official method?
Related
I have 2 issues and they are as follows: issue 1- how can I get my tab to start on landscape mode and keep it locked in at all times, everytime I start my tab it always boots up in portrait mode even if i lock it on landscape before shutting down or rebooting. Issue 2- I purchaced LCD density changer and I cant get it to start on 200 it always boots up on default 240, then I have to reboot it to display at 200. Hope you guys can help me out with these annoying issues. Thanks.
PS. I am running overcome Jupiter on a T-Mobile tab if that helps.
Sent from my GT-P1000 using XDA App
Hey all. I just installed V21a, and i can't STAND the DPI at 240. i tried setting it to 180, and reboot. when it starts back up, the lock screen loads, and when i go to unlock it, the phone restarts...
I've tried using different launchers, using different DPI numbers, and i haven't had any luck. anyone else have any similar problems?
Hello folks, I just replaced my LCD screen on my GT-P1000 galaxy tab, since the old one cracked but now there are weird lines on the streen, if i go into boot mode pressing volume and power the streen is white with lines all over I took an image but can't post it. My sytem isn't bricked as I can hear it loading and I know the screen slide works because it still has the alarm set from before I took the screen out.
I've checked all of the threads I could before coming here and I'm surprised I can't find anything. long story short and sorry if I didn't find it i know i'm a n00b but please HELP!!!!
No ideas at all? could it be a hardware issue, I'm hoping not because I just bought it.
Check if you have replaced the lcd correctly. and i hope you have not set some impossible lcd density like 2000. however, then bootloops should occur.
gogol1996 said:
Check if you have replaced the lcd correctly. and i hope you have not set some impossible lcd density like 2000. however, then bootloops should occur.
Click to expand...
Click to collapse
Thank you for the reply! I put it in correctly as far as i can tell and had no boot loops when i did the power + volume thing it still had lines all over I'm hoping at worse it's a problem with the lcd motherboard strip.
So I have an XT1064 that I just updated to lollipop 5.0.1 (22.21.25 build ). Phone is completely stock,. Anyways I was messing around with the settings and I was adjusting the screen brightness. I lowered it to the lowest setting and the screen turned completely black. Can't see anything. I already tried rebooting the phone but as soon as it boots the screen turns black. Any ideas on how to fix it.
ImperiousRex89 said:
So I have an XT1064 that I just updated to lollipop 5.0.1 (22.21.25 build ). Phone is completely stock,. Anyways I was messing around with the settings and I was adjusting the screen brightness. I lowered it to the lowest setting and the screen turned completely black. Can't see anything. I already tried rebooting the phone but as soon as it boots the screen turns black. Any ideas on how to fix it.
Click to expand...
Click to collapse
Factory reset
Hi, anyone who tryed changing dpi. I did it before, worked OK for a while then screen started to get crazy so I came back as default.
tried changing the dpi, found out somewhere at 700 dpi is the most you can change it while still seeing the rest of the settings. don't know why, but beyond that 700 mark my settings turn invisible. like invisible and unresponsive. you have to repeat the procedure every time you power on your tablet.