Related
I searched all over the place to remap the PTT Button on my AT&T Tilt without altering the ROM. I don't use or want to use Push To Talk services which made the PTT Button useless, Remappers weren't working and the PTT settings screen kept poping up every time I hit the button.
So I tried the following solutions:
1: How to assign a shortcut to EndKey, SendKey, Power Button, PTT Button!!
+ This allowed me to assign another program to the key (Voice Command, Short_PTT.lnk). And it worked fine.
- However, the PTT Settings kept popping up also, though it would go away if I just ignored it.
2: Cingular ROM users: PTT function hacked!
+ Though this is not really for the Tilt/Kaiser, and it would not accept any remap in accordance with its directions, it did disable the PTT Settings program from rearing its ugly head.
++ Combined with solution 1 above, this button does exactly what I want it to do!
Thanks to the 2 contributors, HMA4 and SLEUTH255, Cheers!
NiteStalker said:
I searched all over the place to remap the PTT Button on my AT&T Tilt without altering the ROM. I don't use or want to use Push To Talk services which made the PTT Button useless, Remappers weren't working and the PTT settings screen kept poping up every time I hit the button.
Click to expand...
Click to collapse
Did you delete the PTT registry entry? Otherwise, your remap won't stick.
What I did was
1) delete the PTT registry entry
2) remaps the button using SPB Pocket Plus.
I searched but could not find the registry entry, and I have pocket plus, remapping wasn't working, probly due to the registry (and I'm not very comfortable editing that anyway). This has stuck through several resets, and can be uninstalled if i wish, maybe you could elaborate because I may not understand any negative implications in this method.
I'm pretty new at pocket PC's.
Thanks.
Here ya go!
NiteStalker said:
I searched all over the place to remap the PTT Button on my AT&T Tilt without altering the ROM. I don't use or want to use Push To Talk services which made the PTT Button useless, Remappers weren't working and the PTT settings screen kept poping up every time I hit the button.
So I tried the following solutions:
1: How to assign a shortcut to EndKey, SendKey, Power Button, PTT Button!!
+ This allowed me to assign another program to the key (Voice Command, Short_PTT.lnk). And it worked fine.
- However, the PTT Settings kept popping up also, though it would go away if I just ignored it.
2: Cingular ROM users: PTT function hacked!
+ Though this is not really for the Tilt/Kaiser, and it would not accept any remap in accordance with its directions, it did disable the PTT Settings program from rearing its ugly head.
++ Combined with solution 1 above, this button does exactly what I want it to do!
Thanks to the 2 contributors, HMA4 and SLEUTH255, Cheers!
Click to expand...
Click to collapse
Here's mine,
1)Disable PTT (Credit to vpoet)
2)In the registry navigate to the hklm\services\ptt
Back it up and delete it (yes the entire key)
3) Install cab
It'll map a new button 6; (two functions-button 6 press and button 6 hold) and also allow you to change whatever is on the button using the button menu in settings.
(It's default icon for button 6 is Voice Speed Dial, and button 6 (hold) is record, but you can change either key to what you want.)
Alemaker
Thanks, I didn't know that I could remap it with SBP Pocket Plus, but it works like a charm.
actually, i found this to be the absolute simplest solution available (no programs, just three registry tweaks):
http://tiltsite.com/2008/02/remap-that-ptt-button/
is there a way to remove PTT from 'Programs' also?
I have tried searching for a long time on this because I know I've seen it before, but I can't find it anywhere.
Where is the mapping of the right soft key in the registry? I'm using itje's Touch-IT v3.01 and can't find it anywhere. I don't want the right soft key to be the "Today" screen, but any changes in settings do not "stick."
Hi
Use Advanced_Configuration_Tool_v3.3
Remap softkeys
Dinesh
ADC doesn't change the TF3d right key very well..
It's better to change the registry keys.
Use a decent regeditor (I use fdc taskmanager)
go to HLKM/software/htc/manila
the right and left softkeys are there.
You need to put the complete path to whatever file you want to access and enclose it in ""
HtH
Ok, so I got there, but I really don't want to map it to a path. I just want it to function like the left soft key, but on the right. I looked at the values of the LSKpath, but it is blank too.
If I changed the registry value to "<Right Softkey>" like it is called in settings-buttons-left key, would it still work? I'm a rookie with the registry although I am trying.
And I have the fdc task manager now.
try this little app, works perfect
http://forum.xda-developers.com/showthread.php?t=452505
Yeah, that tweak app lets me assign something else, but I want the right soft key to be context with what I'm running on the screen.
... but still good work! I love your ROM.
do you mean the right Hardware key then?
Yes. Sorry for any confusion... I am talking about the hardware key.
In that case again there's a reg key that you can change,
but have you tried it in the button settings control app? as I've just tried it and it works here using Itje's rom.
<Right Softkey> is one of the options and it sets it fine. Not tested to see if it sticks after soft reset but it works.
anyway reg key is HKLM/software/Microsoft/Shell/Keys/40C3
using the buttons settings control panel changes
Flags to 14 (decimal)
Default (blank as in nothing there)
HtH
Hi there!
Anyone know of a way to map the panels button to the start menu, without the use of software like AE Button? Perhaps a registry change? Because AE Button comes also with a task manager and stuff which I don't want. And the panels button becomes available when using a "lite" ROM from one of the cooks.
Thanks!
Its easy to map it to any .exe, I have it mapped to Launch Manager http://www.fantasticbytes.com/downloads/launchmanager.
Instructions can be found from here http://forum.xda-developers.com/showthread.php?t=448067&highlight=remap+panel+button.
Start menu can be a problem without programs.
Thanks for the answer!
I can't seem to assign it to an Executable though.
With a registry editor I went to HKLM\Software\SonyEricsson\PanelManager\
added a string value with name: Launcher, and string: \..\Program Files\WkTASK\WkTaskCmd.exe
It doens't seem to work (yes, I've soft resetted the device).
Any idea? Thanks!
It works 100%. You made some mistake.
This is what many touch pro/fuze owners want to have - ability to get full control over their keyboards.
This is for Raphael only! Do not try to install this on other devices!
Do not ask me to make a version for other device since my remappers are driver dependent and this can be very and very complicated without real device (if possible at all).
So, what is it ? It's a modified keyboard driver with configurator application for keys setup. Any key (yeah, i mean ANY, including Home and Back keys) can be reassigned to perform desired actions. Keys on a QWERTY keyboard are not an exception, they might be remapped too.
If any key has an action configured and is defined to be processed by my driver extension, it wouldn't go into the system. That is to say no one program even like AEButton will see key events processed by my driver.
Driver extension also can vibrate on any key press.
Modified drivers were tested on many ROMs based on different OEMs, so they would work in most cases.
Thanks dcd1182 for CDMA version testing.
Features:
Different event types supported: single, double and triple clicks, long presses
Two modes of key mapping: three actions per key or direct key mapping
Key repeats in direct key mapping mode
Actions sequence repeats in actions mode
Key combinations using FN modifier
Default key behaviour action - you won't loose key's default behaviour if you just want to add double click or long press to it
Different key behaviour depending on foreground process/window class/window text
Multiple rules for each key to provide different behaviour for each application you want
Multiple actions for each event
Different predefined actions:
Run program
Key press emulation
Send symbol/text to active window
Close active window
Switch to window by class/text
Terminate data connection
Wi-Fi toggle
BT toggle
Screen rotation
Power management (screen power toggle, suspend, reset)
Exceptions lists which are used to deny key remapping depending on foreground process/window class/window text
Configurable long press and double click duration
Configuration import/export in configurator
Changelog is located here.
Configurator UI localization support information is located here.
Requirements:
- .NET CF 2.0 (for configurator app)
- WM 6.1/6.5 compatible
Usage:
- Install SdkCerts.cab
- Install RaphKbdControl_XXX.cab
- Soft reset
- Check if keyboard works by pressing hardware buttons and seeing if they do their work, if not - uninstall cab, this wouldn't work on your current ROM
- If it works - go to the control panel and find "Keyboard Config" on a System page
How to define key processing:
- Run configurator (Control Panel -> System -> Keyboard Config)
- Press Menu -> Add key
- When dialog asking you to press key appears press and release desired key
- Set up needed options in key setup dialog and press OK (left softkey)
- In configurator's main window press left softkey "Update settings" to let new configuration take place (reboot is not needed, coz new settings will work immediately after saving)
What to do if keyboard doesn't work after uninstallation of this software:
- in any way stop device "KBD1:"
- for example, you can use Dotfred's TaskManager - navigate to Devices tab and find the KBD1: string, then press Stop
- delete files \Windows\keypad.dll and \Windows\kbdcntrl.dll
- soft reset
How to add new button to Buttons applet and get it working:
- add or copy existing key [HKLM\Software\Microsoft\Shell\Keys\40CX], where X is 1-6
- under this key add next values:
* Name - display name of the button in list (doesn't matter what you write here, it's only for you)
* Icon - path to icon for this button
- goto configurator and define an 'emulate key press' action for any button you want and set these values here: key code - 'App X' and check 'Win' checkbox - only in this case button will work
- save settings and enjoy newly created button
TODO:
- optimization
- Shift+?? key combinations support (if there would be requests on this)
- more actions
- other useful things
- your suggestions ?
Backup before installing of modified driver is strongly recommended.
Be careful when downloading the cab, make sure you choose the correct version suitable for your device.
Also, here is small collection of AltTab programs attached.
You can use any of them assigned as 'run program' action to desired key to switch between running programs.
well im going to try this right now, thanks
tested and works great.
side note: under the todo list adding different key behaviours depending on active window would be great
thanks
Push!
What a great app ! Couold you try to add something like multi-pressd ?
Glad to see something like this come along.
Curious, any plans to integrate with the Buttons applet found in Settings?
Cheers,
Again, excellent work!
luciusz said:
Couold you try to add something like multi-pressd ?
Click to expand...
Click to collapse
Do you mean key combinations ? I will think about it.
hilaireg said:
Curious, any plans to integrate with the Buttons applet found in Settings?
Click to expand...
Click to collapse
No. Although buttons applet and my extension do similar work, they work in different ways, so it's not possible to integrate them at this moment.
It is very cool program.
But it is not work with russian keyboard on official Rom
Or it's my mistake?
after uninstall app and soft reset do not work hardware keyboard,
and keys: on/off device (on the top side) and loudness (on left side)
What can I do?
Cool tool!!! If you implement to configure different behaviour for different programs that would be really nice!
Wow; this really does sound like the tool I was hoping for. (The hardware keyboard and the home/back etc keys? Perfect!)
Sadly, seems like the rom I am using (MightyROM5, for CDMA and Sprint) wasn't one of them... oh, well. If anyone else with CDMA has a ROM and tries this successfully, though, I'd love to know so I can try a different one.
For me, the hardware keys worked again after an uninstall and soft reset. (To turn the screen back on after it fell asleep while I was doing this, I had to hold the power key down as if I was going to force it to turn off, only longer than normal -- just a FYI if someone else has the same issue.)
ldrn said:
Sadly, seems like the rom I am using (MightyROM5, for CDMA and Sprint) wasn't one of them... oh, well.
Click to expand...
Click to collapse
Could you send me keypad.dll (hope CDMA version has the same name as for GSM) file from your ROM ?
is there a way to make a tab key ? i really would like one . i hate having to touch the screen to change entry feilds on the internet ,usually when i log into xda or myspace or anywhere that has a forums ..... i use it tons on my computer and thats pretty much my only complaint about the fuze keyboard ...NO TAB !
tarkim said:
Could you send me keypad.dll (hope CDMA version has the same name as for GSM) file from your ROM ?
Click to expand...
Click to collapse
This is the keypad.dll from MightyRom 4.16 (CDMA):
Two requests:
1.
Please let me execute .lnk files also, not only .exe files
2.
I cannot use arguments when calling exe files. Please support arguments when calling exe files in the next version.
Thanks for listening!
Oliver
gmanfuzing said:
is there a way to make a tab key ? i really would like one . ....
Click to expand...
Click to collapse
owilsky said:
Two requests:
1. Please let me execute .lnk files also, not only .exe files
2. I cannot use arguments when calling exe files. Please support arguments when calling exe files in the next version.
Click to expand...
Click to collapse
All these would be implemented in new version which I'm currently working on. Wait a few days and you'll get it
mcw
tnx for driver, will se what I can do
Nice!
Will this app let me remap the Volume Up/Down to Scroll Up/Down?
tarkim said:
mcw
tnx for driver, will se what I can do
Click to expand...
Click to collapse
Wow, thank you for taking a look at this! (And thanks Mcw for posting it.)
kusbainian said:
Will this app let me remap the Volume Up/Down to Scroll Up/Down?
Click to expand...
Click to collapse
yes
ldrn
i've analyzed CDMA keypad driver that mcw posted here, it's 90% similar to GSM version
i will patch it in a free time like my one, but i haven't a CDMA device to test it so you will need to test patched driver
Amazing app, exactly what I dream about, thanks!
I would also like to propose some more functions than just running app with keypress, like for example closing window, closing app, opening start menu, etc...
And, if anybody knows standalone symbols keypad replacement, with your superb program we can get rid of this problem: http://forum.xda-developers.com/showthread.php?p=3911050
I have an issue with this app, dunno why but only my storage card is available to search exe from, I'm unable to search exe from main memory, how comes?
Thanks
Hello,
i'm looking for a replacement for AEBplus
I only need a few simple things:
left and right button - should rotate my screen, like it does when i open the keypad
ok button - task manager (or today screen from where i could start the taskmanager)
ok button (long press) - start an application
end call (long press) - lock the device (the you need to enter your password kind of lock)
What program other that AEB can do that and wont use as much CPU resources as AEB does?
you can just go to settings>buttons and assign either keft or right soft key to screen rotate, easiest way IMO
No i cant..there is only the left and right softkey button. Nothing else..and i could not setup a long press this way.
nurps said:
No i cant..there is only the left and right softkey button. Nothing else..and i could not setup a long press this way.
Click to expand...
Click to collapse
x1ButtonMapper, already tried that?
cheers
I use AEButon Plus on my X1a and I am thrilled with it. It doesn't have much (if any) negative effect on performance on mine.
Have you tried it on the X1?
Also for End Key there is a program called "Long Press End Key" I think. It is nice, and cooked into a lot of ROMs.
Hannigan174 said:
I use AEButon Plus on my X1a ...
Have you tried it on the X1?
Click to expand...
Click to collapse
hi m8, he's trying to replace it with an alternative app...as stated in #1
DrakenKorin said:
x1ButtonMapper, already tried that?
cheers
Click to expand...
Click to collapse
Havent tried that yet, can it do what i want?
I guess i could use mortscript for rotation, long press is obviously possible.
But what do i use as fast taskmanager? Can i start the built in taskmanager as application? And what can i use to password lock my device?
Edit: seems i loose the TAB key with X1ButtonMapper and the EndCall button isnt inclueded...thats bad
Is there a way to change some of the keys directly in the registry?
nurps said:
Havent tried that yet, can it do what i want?
I guess i could use mortscript for rotation, long press is obviously possible.
But what do i use as fast taskmanager? Can i start the built in taskmanager as application? And what can i use to password lock my device?
Edit: seems i loose the TAB key with X1ButtonMapper and the EndCall button isnt inclueded...thats bad
Click to expand...
Click to collapse
have a look here, didn't check, just searched (doing your homework btw...)
nurps said:
Is there a way to change some of the keys directly in the registry?
Click to expand...
Click to collapse
advanced config - menu (button) - more settings - key mappings
Mobile Magic doenst support the buttons i need. No longpress for End and no support for the OK button at all..that was the first program i tried.
To bad the options for the End key are grey in Advanced Conifg.
X1BC should allow for a lot more options than mx X1ButtonMapper. I think there is also a second application from the same author called X1BH or something. Check that out.
X1ButtonMapper is pretty lightweight actually. The most overhead involved will be by calling the script functionality but that is done asynchronous, meaning that X1ButtonMapper doesn't wait for the called application or script to finish - it just launches it.
I didn't remap the red and green phone buttons because they can't be easily remapped and I think they are central buttons which should keep their original functionality. I think remapping them will cause more bugs than you will gain functionality. With X1ButtonMapper you already gain enough options for the remaining keys (each with short and long press) which should be enough for most applications. You can also reassign the missing FN+key combos on the keyboard.
I did use the Tab key as Ctrl substitude because I think Tab is not important for Windows Mobile. It is substituted in most dialogs with the right/left keys so use these. You can get the original Tab function when pressing FN+Tab for the few situations where you really need it.
I am using X1ButtonMapper for a long time now and havn't had any stability issues - maybe that's the trade off for having less features.
X1Button manager somehow didnt react to my OK key. I allready have a standalone taskmanager mortscript could run but Ok didnt do anythink. Longpress of the softkeys to rotate the screen worked nicely though.
Longpress delay is a little longer than im used to but that not a big problem.
The longpress of the End key has allready a keylock function as standard setting (wich i find totally stupid because i turn the device of with the switch on top). There must be a registry setting that i could alter so it would run the password lock instead.
I will check into X1BC...
X1BC works thank you...and i like it much more than X1BM because i can setup everything to my likings, longpress timing, vibration on/off and wether i want a Control key replacement.
I could even use the panel key to lock my device if reprogramming of the end key button is not possible.
Does anyone know wich program i have to run to password lock my device? Maybe its possbile with mortscript..i should check that...