Related
Hello i have a HTC G1 with Android 1.6 i downloaded SetCpu 2.10(newest)
but it becomes not higher ?
I tried also custom frequence it still not work
Kernel Version:
2.6.29-00479-g3c7df37
Build Number:
DRC92
Did you bother to stop and consider that maybe 528 is that chip's maximum frequency?
dhkr123 said:
Did you bother to stop and consider that maybe 528 is that chip's maximum frequency?
Click to expand...
Click to collapse
i saw in youtube many people who get the g1 to 650 MHZ
and there is a video he got his g1 to 850 MHZ wow but i cant do it why?
the kernel.
you're using a kernel with a max freq of 528.
don't be tempted and believe everything you see on youtube. ;-) an 850 kernel isn't likely to run stable enough and get you decent uptime.
---
Powered by Android
pl4sMa said:
the kernel.
you're using a kernel with a max freq of 528.
don't be tempted and believe everything you see on youtube. ;-) an 850 kernel isn't likely to run stable enough and get you decent uptime.
---
Powered by Android
Click to expand...
Click to collapse
what is a kernel ?(sorry im a noob
how can i flash my kernel..?
The kernel is core part of any operating system. You will need to find an android build (read: ROM) that incorporated a kernel that will allow you to crank your MHz up to the desired level.
I also recommend that you be careful when overclocking. I am sure you already know you run the risk of frying your phone.
The maximum stable overclock I've been able to get is 614Mhz (with the ocassional random reboot) and 592Mhz completely stable. How high you can clock your processor is completely dependent on what kernel you're running. I'm using CM6.1 right now and the kernel limits the clock to 614Mhz max. I think about 640Mhz is the highest you can go without making it unusable, but you might have a hard time finding a current kernel that lets you overclock that high.
And anyways if you're looking for more performance the CPU isn't the bottleneck. It's the RAM. You should look into swap or compcache to get more performance out of your G1.
592 has been my best stable speed as well with Froyo and now with GingerYoshi 595 is fastest stable for me. Can clock higher but then random reboots and fc's
A few weeks ago when I still had my HTC Hero it was overclocked to 672Mhz (standard = 528Mhz). It gave me a little boost in performance on Froyo, also the batterylife wasn't decreased too much.
But with our N1 running on 1Ghz, will it give much difference when clocked to 1113/1152Mhz? And what about batterylife?
If SetCPU is used what are your settings then? Mine is currently running on stock speed, no SetCPU.
ZeppeMan said:
A few weeks ago when I still had my HTC Hero it was overclocked to 672Mhz (standard = 528Mhz). It gave me a little boost in performance on Froyo, also the batterylife wasn't decreased too much.
But with our N1 running on 1Ghz, will it give much difference when clocked to 1113/1152Mhz? And what about batterylife?
If SetCPU is used what are your settings then? Mine is currently running on stock speed, no SetCPU.
Click to expand...
Click to collapse
I have my nexus one rooted and flashed to MIUI Rom and clock @ 690mhz I get way better battery power. Before I would only get 6hr to 8hr if lucky now I get from 9hr to 13hr depending how much I use it.
set to 1.13 ghz
then screen off to minimum 245mhz
josemedina1983 said:
I have my nexus one rooted and flashed to MIUI Rom and clock @ 690mhz I get way better battery power. Before I would only get 6hr to 8hr if lucky now I get from 9hr to 13hr depending how much I use it.
Click to expand...
Click to collapse
So you underclocked it, what about the speed? It's not to laggy?
Nexus one can run reasonably smooth @ 600mhz and above. It might not open applications as fast as it will be @ 1GHz though.
i think 1Ghz is enough for n1
why do u want an overclock?
Sent from my Nexus One using XDA App
shreyas1122 said:
i think 1Ghz is enough for n1
why do u want an overclock?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I didn't said I want an overclock. It's allready very fast on 1Ghz (compared to my old Hero ), just wanted to know your thoughts about overclocking the N1.
im overclocked at 1152 mhz and profiles set for 245 max with screen off. Overclocking is nice because i like the snappiness but most people cant tell the difference between 998 mhz and 1152. its not needed to overclock but i think profiles help alot. just my two cents
Ok thx, I will try 1150Mhz and see (if it's stable and) what batterylife does. I'm also going to try underclocking.
I have my N1 only for a couple of weeks now and I must say, this phone is awesome. It's VERY fast compared to my old Hero. I remember when I was installing apps on my Hero it became very slow and couldn't do anything untill installing was finished. With the N1 you still can do things while installing apps without lag. The responsiveness and smoothness is also a lot faster. I loved my Hero Because it never let me down, ok it was all a bit slower, but it was getting there. Now with the release of Gingerbread (custom ROM) it became to slow for me and that's why I sold my Hero and bought the N1. It was very difficult to find one, because of the EOL (end of life). But eventually I found one and i'm very happy with it. The N1 is allready more 1 year old, but it still competes with the best phones out there.
I generally run overclocked at 1075MHz, which gives a good balance between battery power usage and processor power. My understanding is that a different voltage scaling method is generally used above 1075MHz, so power consumption will increase above that point.
Didn't knew the voltage would increase above 1075Mhz, will keep that in mind
ZeppeMan said:
Didn't knew the voltage would increase above 1075Mhz, will keep that in mind
Click to expand...
Click to collapse
This is, of course, dependent upon how the kernel is constructed, but this is what I have generally found to be true.
Give us some feedback
I overclocked it too 1075Mhz when screen is on (screen off 245Mhz). Will give my thoughts in a day or 2.
Just report that my battery drain is almost the same as on stock settings. I think it drains a tiny bit faster on 1075Mhz, but nothing major. On the other hand, I don't feel it's faster on 1075Mhz then on stock speed. Only benchmarks give me performance increase.
I'm now on CM6.1.1 with stock kernel (cyanogen), I tried other kernels like Wilmonks kernel,.. Although it was more responsive, battery was going down even faster. I get best battery results with stock kernel.
Hard to choose
more speed = more battery drain
less speed = longer battery
I think I stay with the last option (less speed = longer battery), because Wildmonks kernel doesn't give me enough performance increase over the stock kernel on stock speed.
I have mine at 998mhz, but overclocked 1152 while plugged into power.
Either way, its so easy to play with the clock settings, i'd just have a play with a bunch of different settings if i were you.
liam.lah said:
I have mine at 998mhz, but overclocked 1152 while plugged into power.
Click to expand...
Click to collapse
I'd love a how-to fire that..
mind sharing the app?
Sent from my Nexus One
ZeppeMan said:
wanted to know your thoughts about overclocking the N1.
Click to expand...
Click to collapse
well my thoughts: underclock!
so you can watch movies on it all night!
Sent from my Nexus One
shreyas1122 said:
I'd love a how-to fire that..
mind sharing the app?
Sent from my Nexus One
Click to expand...
Click to collapse
You can use SetCPU to create profiles based on different circumstances.
Me, I have mine clocked to a max of 1075 and min of 245 with the screen on, 576 max / 128 min screen off, 998/128 charging (to reduce heat - overclocking while power is applied can make it silly hot), and a failsafe to clock down to 576/128 if the temperature gets over 50*C.
Fabulous app.
Correct me if I am wrong. When you use setcpu to "ondemand", the CPU speed can ramp up to max whenever necessary, otherwise the speed will tune down to min especially in standby mode. In that way, you can enjoy the advantages of overclocking and underclocking the CPU speed i.e. increasing performance when needed and saving power when not in use, right? When I loaded Rod's MIUI and Wildmonk's kernel, I can underclock down to 128Mhz and overclock up to 1.152Ghz. At the end of the day, I still have over 60% of power left after not so heavily use (some web browsing, checking email and listen some music). Overall, setcpu is a great app for me.
i am fairly new to rooting phones. i just installed cyanogen 7 on my htc hero. works much faster than the stock. had heard that you can overclock the cpu. i downloaded CPUmaster free and lets me clock cpu to 768MHz. have been doing some research on this and have come across a few things. so really just one question; 1) what is the fastest you can clock the cpu with it still being stable?
help with this would be very much appreciated!
Depends on a variety of factors and every Hero is different. Depends on the ROM your running, kernel, etc. You can play around with capped and uncapped kernels but no one can really give you an exact # but you..u'll just have to try tinkering with the settings. If your wise you will just select one of the governors located in Cyanogenmod Settings. I prefer SmartassV2,min. 362 max 691 its efficient and takes care of everything while prolonging the life of your battery. Also remember that overclocking for an extended period of time will overheat your phone and could cause damage, so keep an eye on the core temp while playing with ur cpu settings.
1big_bear said:
i am fairly new to rooting phones. i just installed cyanogen 7 on my htc hero. works much faster than the stock. had heard that you can overclock the cpu. i downloaded CPUmaster free and lets me clock cpu to 768MHz. have been doing some research on this and have come across a few things. so really just one question; 1) what is the fastest you can clock the cpu with it still being stable?
help with this would be very much appreciated!
Click to expand...
Click to collapse
Some phones can't take more than 691, some can handle 768. I have found, for my phone, that 245/710 works great for me. I can see a marked improvement in snappiness at 710 over 691, but not really much at higher frequencies.
I used to use OnDemand as my scheduler, but with the newer .35 kernel I have liked the SmartassV2; I don't have any issues with music cutting out like i would with smartass or interactive. CM7, or most any of the roms built off of that, have the option in CM Settings to adjust both the frequency and governor so you don't need to install a 3rd party app to do so (it's under the "performance" heading). I also like to go into the spare parts app and set my animations to fast; that's just me though. I think the new CM7 builds have Jaybob's .35 kernel now instead of the .29. I have not seen an uncapped kernel that goes beyond 768 in a long time. There was one that jasonmaloney compiled that did 806 (I think) but that was pulled by him as it isn't good for the phone. just test it out and see what you like with what you have installed on your phone. Every phone is different even though they are the same.
Hi!
I've struggled with my Incredible S for a long while now. Asked questions here and so on but haven't really got any answers.
Things went something like this: My mate rooted his and my IncS same time with Revolutionary. We both installed ARHD and overcloked to 1920mhz just for the lulz. Everything went just fine for a while for both of us, but then I decided to restore my apps sms etc from the stock rom with MyBackup (or what ever its called). Restore failed at some point and I needed to flash ARHD again.
Ever since my CPU hasn't been able to reach 1920mhz or anywhere close ever again. I've been flashing dozens for ROMs now and only few of them could be O/C to 1600mhz. Some freeze at 1152mhz instantly, others can be stable for few minutes and then crash.
My mate is running CM7 with enki-v0 kernel at max O/C without any problem. I tried CM7. It started to become unstable with default O/C after few days and I had to siwtch back to some Sense Rom that worked at normal O/C.
Why some kernels (forexmpl Quattro beta 6) allow me to O/C at 1.6Ghz and others freeze just at 1.1Ghz? (Affinity,Unity,Niks trinity, Quattro betas 7- Rc3)
And why my CPU can't reach the 1.9Ghz anymore? Could I **** something up and the CPU is broken now or is there something wrong with my rooting?
TL;DR Only few Roms and kernels allow O/C and with them its a pain in the ass cuz of unstability, why?
- And I'm not looking for solutions like "Flash to stock". I know how to get it stable, but then again 1Ghz stock ain't that cool.
How are you overclocking? I've never used CM7 before, but I do use SetCPU. Every time you flash a ROM you need to go into SetCPU and Device Selection and then Autodetect Speeds Recommended. Either that or you can try selecting Show Other Frequency Sets and pick your processor from there.
Basically the only thing I can think of is that your processor is not being recognised correctly.
BTW When you say "Everything went just fine for a while" how long is a 'while'? The only reason I ask is, how sure are you that running your processor smoothly at 1920mhz for that period wasn't just a fluke, and your phone (for whatever reason) cannot normally run at that speed? From what I understand, even phones of the same model can differ as to the speeds at which they can be overclocked. Maybe you just got lucky the first time, and now that lucks run out?
Dont you think that 1.9 ghz is a bit dumb... You might (have) damage(d) your cpu by doing that. If i would oc my 3ghz pc to 5ghz without cooling modification i would fry it in half an hour.
I mean cmmon use your brain. Oc it to smth logical like 30% (1.3 ghz) and you will not have such problems .... Sorry, but that just sounded plain stupid to me
Sent from my HTC Incredible S using xda premium
CyanideJack said:
How are you overclocking? I've never used CM7 before, but I do use SetCPU. Every time you flash a ROM you need to go into SetCPU and Device Selection and then Autodetect Speeds Recommended. Either that or you can try selecting Show Other Frequency Sets and pick your processor from there.
Basically the only thing I can think of is that your processor is not being recognised correctly.
BTW When you say "Everything went just fine for a while" how long is a 'while'? The only reason I ask is, how sure are you that running your processor smoothly at 1920mhz for that period wasn't just a fluke, and your phone (for whatever reason) cannot normally run at that speed? From what I understand, even phones of the same model can differ as to the speeds at which they can be overclocked. Maybe you just got lucky the first time, and now that lucks run out?
Click to expand...
Click to collapse
I use SetCpu and every time it recognizes automaticly some speeds and I use them. The manual setup is bit beyond my knowledge.
The while was something like 3 days or so. Hard to remember. But still wayy more than like few minutes. I will try to set SetCPU manually, thx!
Psyloid said:
Dont you think that 1.9 ghz is a bit dumb... You might (have) damage(d) your cpu by doing that. If i would oc my 3ghz pc to 5ghz without cooling modification i would fry it in half an hour.
I mean cmmon use your brain. Oc it to smth logical like 30% (1.3 ghz) and you will not have such problems .... Sorry, but that just sounded plain stupid to me
Sent from my HTC Incredible S using xda premium
Click to expand...
Click to collapse
I know 1.9ghz is dumb. I used it back then only in short bursts. Usually scaling "interactive" between 245mhz - 1.5Ghz. Now even that is too much for most kernels. I thought that the freeze is caused by the CPU protecting itself from getting damaged or something, but not sure.
Still if the CPU was damaged, why would Quattro beta 6 kernel run at 1.6ghz without overheat or anything and RC3 kernel freezes at 1.1Ghz when try to load something more than homescreen..
I would use beta 6 kernel for quattro, but it does not support wifi in RC3.. Virtuous team made some changes to kernel at beta 7 and I would love to know what changes..
inSaN1Ty_X said:
I use SetCpu and every time it recognizes automaticly some speeds and I use them. The manual setup is bit beyond my knowledge.
The while was something like 3 days or so. Hard to remember. But still wayy more than like few minutes. I will try to set SetCPU manually, thx!
I know 1.9ghz is dumb. I used it back then only in short bursts. Usually scaling "interactive" between 245mhz - 1.5Ghz. Now even that is too much for most kernels. I thought that the freeze is caused by the CPU protecting itself from getting damaged or something, but not sure.
Still if the CPU was damaged, why would Quattro beta 6 kernel run at 1.6ghz without overheat or anything and RC3 kernel freezes at 1.1Ghz when try to load something more than homescreen..
I would use beta 6 kernel for quattro, but it does not support wifi in RC3.. Virtuous team made some changes to kernel at beta 7 and I would love to know what changes..
Click to expand...
Click to collapse
have a look at the changelog and the source code, both in the thread.
Nonverbose said:
have a look at the changelog and the source code, both in the thread.
Click to expand...
Click to collapse
From the source code I don't understand a single thing
and...
"New kernel V5 (new acpu table, updated GPU drivers)"
What is acpu table? GPU thing I get, but hardly it can prevent from O/C?
Hey guys
I know their probably another thread out there with this in it but... Yeah. But go ahead troll me lol, im still a bit of a noob.:silly:
Anyways, i have a Galaxy Ace s5830. I have Beats with smooth sense ROM. I had it upto 883MHz Yesterday but after i turned it off then back on ROM Toolbox reverted it to 806MHZ. 883MHz seemed a lot faster even though some people get theirs close to 1GHZ
My phone afterwards rebooting had issues such as the phone becoming un-responsive when i was even doing nothing (maybe the overclock to 883MHz had some short term effect?) But the phone seemed fine after safely turning it off then back on several times. Still works perfectly i got scared when it started to become un-responsive. But it works well now i have also used pimp my ROM, and the scripts work like a charm. Especially the call quality one (it uses bravia engine or something?). But with pimp my ROM wi-fi and network tweaks it completely broke wi-fi saying wi-fi connecting... Then saying under the network name 'Error'. Dam it took so long to get the IP address then said error like i said lol
At the frequency 883MHZ the phone seemed stable and faster than ever before, i did change it in small increments
So just wondering, what is the safe and most reliable frequencies to set it at? I currently use 225Min and 806 Max. With the userspace governer.
I know the terms of ' Safe ' and overclock don't mix (sorta like water and my dads S2 :crying: ).
Im also considering buying a 2450MAH battery from ebay for about 5.99 AUD. Any suggestions on should it be okay and better? But i mainly would like to knwo about the overclcoking lol.
So yeah, basically what is a good frequency to set it at? Is 883MHZ okay? Am i going to fry it out or completely brick or damage the phone or cpu if i set it at 883MHZ? Would love to buy a new phone but i need to save im only 14
So yeah please help me and you could help others too. Please be welcomed to troll me
I plan on having this phone another 3-4 Months before i consider buying the S2 or Galaxy note when their cheap (like really cheap)...
Like i said please help, and feel welcomed to troll me when you do help :highfive:
Man i feel like a Rebel when i overclock
That battery is a fake and has been confirmed as such. If you want a higher cap. battery get a 1500mAh or 1600mAh. I don't like messing with the clocking, good luck to you.
Thanks
Narwhal73 said:
That battery is a fake and has been confirmed as such. If you want a higher cap. battery get a 1500mAh or 1600mAh. I don't like messing with the clocking, good luck to you.
Click to expand...
Click to collapse
Thank you for informing me that the battery is a fake ... But the seller has like 96%/100% seller rate or something?
Thanks for all your help, i hited like
Sorry for my 'Noobiness'.
What battery do you reccomend? or should i consider getting a AA battery to USB power charger?
i'm pretty comfortable with 825 or 844 mhz
It's pretty good with 614 MHz lol
Sent from my GT-S5830 using Tapatalk 2
Running smooth even on 614 Mhz.
Moderate usage.
King Android said:
Thank you for informing me that the battery is a fake ... But the seller has like 96%/100% seller rate or something?
Thanks for all your help, i hited like
Sorry for my 'Noobiness'.
What battery do you reccomend? or should i consider getting a AA battery to USB power charger?
Click to expand...
Click to collapse
Right now I am just using the stock one. I personally wouldn't change my battery to anything other than stock, but people have reported that 1500mAh or 1600mAh work well. I wouldn't use anything that has a higher capacity than that though. Also, if it's very inexpensive it's probably not real.
Clocking actually goes on the rom. I've seen people having OC over 1gHz & still stable with the mad kernel but I gave up clocking as I didn't see much of a difference & also underclocking started giving me FCs on some heavy apps while it was all fair in the unclocked state. And again, there's no such thing as a best frequency. You find your own values. What works well for him might mess up your phone rebooting all by itself. Stock batteries are always fine & they also keep you under warranty. Anyone ever wondered why the phone manufacturers didn't implement clocking as a part of it ? Stability is the word. I've seen here, I've seen there. East or west, stock is the best ! Try keeping as close to stock as possible, just to have that extra touch of safety & stability
Sent from my GT-S5830 using xda premium
Hello all.
I was reading this thread and became interested in overclocking. In my case my device is:
Samsung Galaxy Ace GT-S5830L (labeled as GT-S5830 by CyanogenMod)
CyanogenMod-7.2.0-cooper stable (Android version 2.3.7)
Kernel 2.6.35.7-perf-CL882825 ([email protected] #21)
I was checking in CM settings -> Performance -> CPU settings that I could adjust min and max clockspeed, but in max frequency the maximum one is the same processor's speed, 800 MHz. So my kernel doesn't support overclocking.
After a search in the forums I found there are plenty of custom kernels for this legacy device. But I'm relatively new to the kernel world, so I wanted to ask you for advise. What custom kernel could I try for my device for overclocking? Or King Android, what custom kernel are you using?
It'd the first time I do the overclocking stuff, I'd like to try it to see if some higher quality mp4 videos (which are run by MX Player only in software acceleration) can run better, as well as some games and emulators.
I'm also kind of a noob as you can see. If you want to troll/scold me...
Thank you all.
ctcx said:
Hello all.
I was reading this thread and [...]
Click to expand...
Click to collapse
Hi you can try FireKernel or BlackHawk kernel. Use the search function to find them easily. Both supports Overclocking and are made for CM7. [MAKE SURE THEY SUPPORT YOUR S5830L]
At the moment I'm with Democracy ROM which is based on unofficial CM7 and I don't really feel the need of overclocking. It is all smooth with firekernel at
Min 245
Max 806
Governor smartassv2
Sent from my... oh wait, who cares?
I did my search.
Maybe I forgot to mention I haven't installed a custom kernel before... Does the kernel come as a file itself, or along a CM7 custom rom? And if it comes as a file itself, how can I install it? I already mentioned what CM7 I have installed. It's the "official" stable one.
Would OCing help to improve videos and games performance? i.e, faster, no lag...
You can set it to whatever your phone can handle. Mine can't go past 844Mhz otherwise apps start force closing and such. If your phone is completely stable at 883Mhz then you're good.
As for the battery, no. It's a fake. Buy a 1500mAh like I did. Works like a charm and it brought 3. Lasts a little longer and it's really amazing. Had it for a while now. Still have one in the pack, only been using 2 when I don't get to charge my phone. Really handy.
---------- Post added at 03:07 AM ---------- Previous post was at 03:03 AM ----------
ctcx said:
I did my search.
Maybe I forgot to mention I haven't installed a custom kernel before... Does the kernel come as a file itself, or along a CM7 custom rom? And if it comes as a file itself, how can I install it? I already mentioned what CM7 I have installed. It's the "official" stable one.
Would OCing help to improve videos and games performance? i.e, faster, no lag...
Click to expand...
Click to collapse
OCing helps the phone over all. But remember, without much free ram, OC won't really change much. You need a balance of ram and CPU. Like me, I use swap and OC to 844Mhz. Even if it's a low OC, it's still better than nothing.
1. @SuperAce609: I have 104 Mb free RAM out of 278 Mb total RAM. Mine is Galaxy Ace S5830L with CM 7.2. Would OC work for me? Up to what frequency?
And how can you have 600 Mb of RAM? Is your device really an Ace?
2. There's still a doubt I haven't been able to find out myself: does the kernel come as a file itself, or along a CM7 custom rom? And if it comes as a file itself, how can I install it? I was suggested FireKernel or BlackHawk ones...
Any help?
ctcx said:
1. @SuperAce609: I have 104 Mb free RAM out of 278 Mb total RAM. Mine is Galaxy Ace S5830L...
And how can you have 600 Mb of RAM...
2. There's still a doubt I haven't been able to find out myself: does the kernel come as a file itself, or along a CM7 custom rom? And if it comes as a file itself, how can I install it? I was suggested FireKernel or BlackHawk ones...
Click to expand...
Click to collapse
1.- Every Ace is diferent..some Ace's can go up to 960 Mhz while other just 844 Mhz, the thing is: try it yourself overclocking in small jumps. Swap is a small amount of memory of your SD card, that Android use it like if where RAM, but decreases SD card life...
2.- Some Kernel came Built in on Some particullary ROM's but generally cames on a CWM Flashable zip; FireKernel & BlackHawk are specially for CM7; In my opinion FireKernel is the best... And there are others like Battery Extender Kernel or NimsKernel but these Kernel are only for Stock ROM's...
I hope you find useful my info...
Thank you, Blake2893.
Then there's just 2 doubts left, if you don't mind.
There's a fair number of custom CM7.2 roms with FireKernel in the developer forum. Is there one you or someone else could say is the best in terms of stability and least number of bugs? Or is that something I should test myself in the S5830L?
The Ace S5830/S5830L has 278 Mb total RAM by default. If I understand well, you're implying I could modify SWAP partition in order to increase RAM and, probably if lucky, with this make OC work better. How can I do that? Do I also need a custom kernel/rom for that?
The best stable Roms so far are the stock GingerBread based ones... but if you aks me about CM7 there a few like Apocalypse rom(ICS styled ROM) with the FireKernel that suports swap I think...
and for Swap you only need a Kernel with Swap enabled and a SWAP Partition on your Sd card...
lets see im fine and stable with 979 mhz without reboot for 9 hours
overclock is depend on your hardware
best over clock freq.
King Android said:
Hey guys
I know their probably another thread out there with this in it but... Yeah. But go ahead troll me lol, im still a bit of a noob.:silly:
Anyways, i have a Galaxy Ace s5830. I have Beats with smooth sense ROM. I had it upto 883MHz Yesterday but after i turned it off then back on ROM Toolbox reverted it to 806MHZ. 883MHz seemed a lot faster even though some people get theirs close to 1GHZ
My phone afterwards rebooting had issues such as the phone becoming un-responsive when i was even doing nothing (maybe the overclock to 883MHz had some short term effect?) But the phone seemed fine after safely turning it off then back on several times. Still works perfectly i got scared when it started to become un-responsive. But it works well now i have also used pimp my ROM, and the scripts work like a charm. Especially the call quality one (it uses bravia engine or something?). But with pimp my ROM wi-fi and network tweaks it completely broke wi-fi saying wi-fi connecting... Then saying under the network name 'Error'. Dam it took so long to get the IP address then said error like i said lol
At the frequency 883MHZ the phone seemed stable and faster than ever before, i did change it in small increments
So just wondering, what is the safe and most reliable frequencies to set it at? I currently use 225Min and 806 Max. With the userspace governer.
I know the terms of ' Safe ' and overclock don't mix (sorta like water and my dads S2 :crying: ).
Im also considering buying a 2450MAH battery from ebay for about 5.99 AUD. Any suggestions on should it be okay and better? But i mainly would like to knwo about the overclcoking lol.
So yeah, basically what is a good frequency to set it at? Is 883MHZ okay? Am i going to fry it out or completely brick or damage the phone or cpu if i set it at 883MHZ? Would love to buy a new phone but i need to save im only 14
So yeah please help me and you could help others too. Please be welcomed to troll me
I plan on having this phone another 3-4 Months before i consider buying the S2 or Galaxy note when their cheap (like really cheap)...
Like i said please help, and feel welcomed to troll me when you do help :highfive:
Man i feel like a Rebel when i overclock
Click to expand...
Click to collapse
The best and most stable overclock freq. is actually 906mhz-864mhz. It works like a charm mate! Try it.
Cyb3rVect0r said:
The best and most stable overclock freq. is actually 906mhz-864mhz. It works like a charm mate! Try it.
Click to expand...
Click to collapse
Using CPU high frequencies is not recommended, your device's life will be reduced considerably