Related
im trying to set up a adb so i can use my g1 as a webcam:
http://forum.xda-developers.com/showpost.php?p=4975656&postcount=17
however when i plug in my g1 it says everything was installed except the adb.
Do you have ADB setup on your computer in the first place? If not, http://forum.xda-developers.com/showthread.php?t=532719.
I installed the adb with the sdk as it was mentioned and my computer still doesnt show my phone as an adb device
Did you install the drivers for adb?
i cant find out how!
85Mario85 said:
i cant find out how!
Click to expand...
Click to collapse
a little search and VOILA!!!
http://forum.xda-developers.com/showthread.php?t=446274&highlight=64bit+usb
this works if you are running windoze 7 x64
i dont get how im supposed to put windows 7 on test mode =S
im getting this aswel "When running the command prompt adb install I receive an error dialog stating:
"This application has failed to start because AdbWinApi.dll was not found. Re-installing the application may fix this problem.""
im getting so frustrrated with thiss
bump! i dont get this =[
Search for pdanet and install it. That's how I set up adb for Windows. (Btw - get rid of Windows. Finally did my switch to ubuntu today - ahahahahahahaha I'm sad I ever even used Windows.)
Yea, but adb is kind of a ***** about permissions and such on ubuntu. But each has its quarks.
@85mario85 - You have to cd to the adb.exe in the tools folder ie. c:\sdk\tools\ then run adb. Or add it to the paths part, but I can't remember at the moment.
evilkorn said:
Yea, but adb is kind of a ***** about permissions and such on ubuntu. But each has its quarks.
@85mario85 - You have to cd to the adb.exe in the tools folder ie. c:\sdk\tools\ then run adb. Or add it to the paths part, but I can't remember at the moment.
Click to expand...
Click to collapse
adding it to the path just saves time. instead of having to cd all the time you can just run adb. i highly suggest it. and i agree - ubuntu is a ***** about permissions all the time. i love it, but i have to learn to use it. however, i'll probably always have a copy of windows in case i can't find out how to do something and have to have it done. better safe than sorry. =]
ok... i am a little confused to what "adb" is and how to get "su" (superuser) via a Terminal app that i downloaded for my phone.
I type "su" and and I get "su: not found" same with "adb"
what am i not understanding?
trying to follow http://forum.xda-developers.com/showthread.php?t=797397 but the commands are not working..
i am a little new to my captivate here, so help me out. I install 2.2 and i would like to root it..
thanks in advance, and forgive my ignorance.
ADB is the Android Debug Bridge. You can read what it is here Android Debug Bridge
To use this you must first install the Android Software Development Kit found here Download the Android SDK
Read up a bit on those and search the forums to find more help. Good luck.
I was / am in the same boat.
I spent 4 hours last night getting it figured out, I sure wish I could find an Android for dummies book.
Anyway, here is what cha do....
once you dowload the adb package unzip it to the root of your c drive, you may want to rename it to some thing shorter, I just called it android.
next download the root package from the root thread here and unzip the files and copy or cut them into the tools folder of the ADB folder you placed on the root of C:
navigate to the tools folder and copy adb.exe and adbwinapi.dll to the system32 directory in windows, you will need to reboot. This will allow you to use the windows cmd line.
now I am on window 7 64 so I ran the commond line as administrator to be safe. to do this click start all prograns accessorires right click cmd and select run as admin.
change directory to the tools folder, for me "cd c:\android\tools"
Connect phone be sure usb debugging is on in the phone, (settings, application, development. it will install drivers. (I manually installed the samsung 64 bit drivers I had downloaded from samsung)
from the command promt type adb devices and hope fully it will see your phone and return with the serial number and them you are good to go with following the instructions to root from there.
I hope this helps...
Cappy
the information on how to use this is really not in one place, I spent 4 hours last night searching all over to figure it out, just so I would not ask and be belittled because there is NOT good information.
I have even been searching for any books I can find on Android so I can understand how this system works, but have found no good ones yet.
I need a nice Android for dummies type thing.
I spent an hour just to figure out it still won't run right unless you change directory to the tools folder where everything is at. ( it's been like 15 years since I messed with dos).
Some where in the wiki or bibles or all the other how toos being posted we really need better information on how to use the tools and what they are.
Cheers
Jeff
http://www.google.com/search?sourceid=chrome&ie=UTF-8&q=android+for+dummies
WOOT looks like they have one now...
Quick Tip: Once you get the Android SDK installed, you can add the location of the Tools directory to the Windows path variable and be able to call the programs from anywhere on your computer.
Masacrk said:
Cappy
the information on how to use this is really not in one place, I spent 4 hours last night searching all over to figure it out, just so I would not ask and be belittled because there is NOT good information.
Click to expand...
Click to collapse
Sorry you feel I was trying to belittle you. I was trying to be helpful by pointing you to the proper information. You know the old saying, "You'll never learn by letting others do it for you."
Sent from my SAMSUNG-SGH-I897 using XDA App
it's all good man I did not mean you.
I was taught along time ago that there are no dumb questions but it don't seem to hold true around here I have noticed.
Quess the new generation are not as patient or willing to help as mine was.
Ha ha ha. Guess I should have picked a better screen name.
Sent from my SAMSUNG-SGH-I897 using XDA App
ugg.. I dont get it.. I finaly got it to connect to the phone, but even in windows when i type in SU I get invalid command..
uggg..
i dont get it.. please help!
go to this thread
http://forum.xda-developers.com/showthread.php?t=797397
at the bottom of the first post you will see a link to Captivate2.2rootpack.zip.
http://forum.xda-developers.com/attachment.php?attachmentid=411708&d=1285997559
download , unzip, copy contents to the tools folder of the sdk package.
Also this thread was a help,
http://forum.xda-developers.com/showthread.php?t=502010
Cheers
Jeff
Masacrk said:
go to this thread
http://forum.xda-developers.com/showthread.php?t=797397
at the bottom of the first post you will see a link to Captivate2.2rootpack.zip.
http://forum.xda-developers.com/attachment.php?attachmentid=411708&d=1285997559
download , unzip, copy contents to the tools folder of the sdk package.
Also this thread was a help,
http://forum.xda-developers.com/showthread.php?t=502010
Cheers
Jeff
Click to expand...
Click to collapse
thanks.. i think i got that far,.. I copied the files into the tools folder and I still get
Code:
$ su,busybox,sqlite3
su,busybox,sqlite3
su,busybox,sqlite3: not found
$
i even copied the files to the android, and ran it from that folder.. still no luck
what am i doing wrong?!? gosh.. i never felt soo dumb about things like this before
eatonjb said:
thanks.. i think i got that far,.. I copied the files into the tools folder and I still get
Code:
$ su,busybox,sqlite3
su,busybox,sqlite3
su,busybox,sqlite3: not found
$
i even copied the files to the android, and ran it from that folder.. still no luck
what am i doing wrong?!? gosh.. i never felt soo dumb about things like this before
Click to expand...
Click to collapse
OK. took me a little while to figure this out, too. Not sure of your level of knowledge of the terminal. If I over-simplified please forgive me.
"Extract RootPack zip file" Did you do this? I think you did from you post. Make sure you've copied the files to your "tools" subfolder in the android sdk folder.
Click the start button, click run, type "cmd", press enter.
When that window opens type "cd.." and press Enter. Keep typing "cd.." and pressing Enter until the only thing you see at the prompt is "c:\"
Now navigate to the Tools folder where ever it is you put the android sdk.
I put mine at "c:\android_sdk" so I would type "cd c:\android_sdk\tools"
Plug your phone into your computer.
Go to home screen>menu>settings>applications>development and select "USB debugging".
At the command prompt type "adb devices" and your phone should return a value (the serial number).
If that works you should be able to follow the directions below.
It's been mention that you should be able to copy the commands from the web page and right click the terminal window and select "Paste". Makes everything faster, easier and more accurate. One other thing to mention: after you perform these steps and you want to do something else through adb where you're instructed to type "su" you'll need to open the SuperUser application on your phone and press "approve" after typing "su".
adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin
adb shell
cd /data/local/tmp
chmod 0755 rageagainstthecage-arm5.bin
./rageagainstthecage-arm5.bin
(wait for you to get kicked from adb)
adb shell
mount -o rw,remount /dev/block/stl9 /system
exit
adb push su /system/bin/su
adb push busybox /system/bin/busybox
adb push sqlite3 /system/bin/sqlite3
adb push superuser.apk /system/app/superuser.apk
adb shell
cd /system/bin
chmod 4755 su
chmod 4755 busybox
chmod 4755 sqlite3
reboot
eatonjb said:
thanks.. i think i got that far,.. I copied the files into the tools folder and I still get
Code:
$ su,busybox,sqlite3
su,busybox,sqlite3
su,busybox,sqlite3: not found
$
i even copied the files to the android, and ran it from that folder.. still no luck
what am i doing wrong?!? gosh.. i never felt soo dumb about things like this before
Click to expand...
Click to collapse
those arent even commands. just random words you put into the terminal....
follow the instructions exactly like PersonOfKnownOrigin has posted. it works
I too was having trouble, turns out the files were extracted and were in a sub folder in the Tools folder so I copied and pasted them directly into the tools folder one by one, that worked great for me. Also, I find it easier to open command shell and use the Android Tools by holding the shift key and right clicking on the Tools folder and choose open command window here. I hope this helps.
I have a stupid path becaue my laptop messed up when I first got it and I haven't been able to fix it because DOS is difficult to me. It works fine but I am too lazy to type such a long path and if you are off at all it dosen't work.
just copy and paste the commands so you don't get them wrong, worked for me. The command is su then hit enter then enter the next command line and hit enter, works like a charm.
ok, I got it.. I misinturpted that the first line (the 3 commands in one line) was a command that I was supposed to run..
it was not..
dohh.. thanks guys for all the help... i felt kinda dumb, but now I think I am kinda smrt. I mean Smart!! (Simpsons Humor)
thanks again for the paitence.
Eaton
I have been trying to make this whole adb think work for about twenty hours strait and I still have not gotten very far. I own a mac and no pc and updated to froyo with my buddies pc. I have followed all the directions to a T over and over using terminal on the mac and I can get to the ADB commands and even to where I can see my phone by clicking devices but I must be missing something important. ANY HELP WOULD BE REALLY APPRECIATED I AM ABOUT TO PULL MY FREAKING HAIR OUT!!!
Ok, so if you can see your phone through adb, then you are definitely on the right track. Unfortunately, I'm not really familiar with OS X anymore so I'm not quite sure how to do it. Just sit tight for now until someone who does use a Mac, or has more of a clue then I do can help you out.
But seriously, don't pull your hair out. It won't stay on your head forever ya know...
Edit: oops, just saw this is JI6 (Froyo) not JF6, so I can't help you, but here is a general overview:
from terminal inside Android sdk main directory:
tools/adb devices -> list all devices connected that ADB can see
tools/adb shell -> gets a normal user shell on your phone
tools/adb reboot recovery -> reboots into recovery mode, suitable for update.zip root method
--------------------------------
Place the root update.zip on internal sdcard.
from terminal inside Android sdk directory:
tools/adb reboot recovery
Select the update software option, and you will be done.
laxwillsch said:
I have been trying to make this whole adb think work for about twenty hours strait and I still have not gotten very far. I own a mac and no pc and updated to froyo with my buddies pc. I have followed all the directions to a T over and over using terminal on the mac and I can get to the ADB commands and even to where I can see my phone by clicking devices but I must be missing something important. ANY HELP WOULD BE REALLY APPRECIATED I AM ABOUT TO PULL MY FREAKING HAIR OUT!!!
Click to expand...
Click to collapse
Start simple:
If you open a terminal on the mac, and go to your android SDK tools folder; what happens when you type ADB shell?
Or if you type any of the ADB push commands?
You need to give more detail around what you are seeing for us to help you.
Ok so if I am in terminal and i type in my /android-sdk-mac_x86/tools nothing happens and it just says /android-sdk-mac_x86/tools is a directory. But if I type the same but with /tools/abd it opens the abd command lines, like how to write code. Then when I try to "adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin"
it says "-bash: adb: command not found"
however when I type laxwillsch$ /android-sdk-mac_x86/tools/adb shell
it does give me the drop down $
but when I then try to write the next line of code "chmod 0755 rageagainstthecage-arm5.bin"
it says "chmod: rageagainstthecage-arm5.bin: No such file or directory"
I am stumped I am beginning to think i need to buy a pc as I am very interested in android development and want to learn more, but it seems all the tutorials are run assuming you are on a PC
EDIT** I have downloaded the android SDK started pack, and the 2.2 root pack and they are all in my /android-sdk-mac_x86/tools folder that is directly on my Macintosh HD for simplicity
Do you know how to change directories (cd command)?
The problem is that you are trying to work in one directory, but all your tools are in another.
So change directories to the tools directory:
cd /android-sdk-mac_x86/tools/
now run your adb commands - you may have to type ./adb to tell your mac to look in the current directory for the adb command (that is what ./ means "start here")
Also, try to understand what is happening so you can more easily troubleshoot: chmod is a command to change permissions, and you are running it on the phone. If you can't push the file to the phone, then you can change it's permisssions. I guess you never got rageagainstthecage on the phone, so there is no way to chmod it.
If you can't do this on a mac, a PC is not easier. I use both, and like both, but you need to learn basic commands first - they apply to the mac terminal and the windows cmd prompt.
Getting root means moving in and out of the phone - adb shell - puts you in a terminal on the phone. So you really need to understand cd (change directory); pwd (present working directory - shows you where you are); cp (copy); and know your current path - what the ./ does.
I hope this helps, not trying to sound condescending - maybe practice a linux terminal tutorial would help
Thanks so much, I am at school right now and cant test out all that but you are really helping me understand all this! I will post tonight and let you know how it goes. again thank you
ok so i dont have my usb cable with me but I was playing around with the commands that you suggested and ureka! i finally got to a point where it says "h70-33-65-19:tools laxwillsch$" thats a first! and when i type pwd it shows "/android-sdk-mac_x86/tools" so that means I am working out of the right directory right? and from here I enable usb debugging connect my phone then just copy and paste the codes from the thread correct?
yes, it sounds like you are on the right track. But take it nice and slow when you follow the steps. It is very important that the commands are entered exactly as you see them.
Also, one step tells you to wait for something to run and kick you out of ADB - wait just like it says - takes about 45 seconds but feels like forever.
If you are in the tools directory - just by typing "adb" no quotes will give you whole page of adb commands - if you get a "command not found", then you need to add the ./ and make it ./adb
Hope this helps and again, read the commands step by step a couple times first so you understand what is happening.
In a nutsell, you push the rage file;
change its permissions, run it;
get kicked out of ADB and then open a new ADB shell;
you are now root;
remount the system partition to give you write access when it reboots;
reboot;
push over some files;
change permissions on files you pushed;
reboot;
Some things to know - SU is a command for gaining root access; when you use SU your prompt changes (in adb shell) from $ to #
If you are succesful you should see the SuperUser app listed in your apps.
Done and Done just rooted successfully couldnt have done it without you! thanks so much
ok, so i wrote a program in C# that will open a process CMD.exe and send adb Commands from a Working directory i setup previously that includes Adb and all the other goodies i need for automating the process of rooting and such.
here's my issue, the program will work perfectly in Win 7, but when i run in XP,
i run ADB shell reboot. the phone will reboot. but never reconnect until i end the my program process. ive tried adb kill-server. tried closing the process within my program. i do notice in XP adb will open two adb.exe processes. even when running outside of my program in the command prompt.
i am using a backgroundworker thread to send the commands.
any help is appreciated.
let me know if you want me to post some code. though i don't think its the programming.
Don't think its the programming either. XP has all sorts of weird bugs and why I jumped ship immediately when 7 came out and have been quite happy since. Don't know much about programming but I've read alot of issues with XP and adb. Stick with 7 if you can.
ok, so still haven't found out why adb doesn't like Win XP. the way i got around it was to drop C# for the ADB commands. i made a batch script to run my adb commands. and a C# console app to send the Serial Modem Commands(for PRL and NV item writing) that i call in my Batch file.
but if anyone has any tips to try ill for sure try them.
more detailed description.
i create a new thread that will create a Process of cmd.exe then do a process.StandardInput("ADB Commands");
the current running thread will finish before the next can be started so no prob with multiple threads running.
all my adb commands ie. adb push recovery.img /wherever/recovery.img
work just fine and does what its 'spose to.
until i get to adb shell reboot.
the phone will reboot but the adb driver is never reconnected after the reboot. like it normally would when running the command from the terminal.
i will have to close my C# program before it will connect and recognize the driver again.
again all this works just fine in Win 7.
i also tried to do a "Scan new Hardware" in device manager after reboot and both programs will just go unresponsive at that point.
next, i will attempt to make my own ADB in C#. if im not mistaken adb uses a TCP connection to communicate with the device. default port 5037 me thinks.
@TronofTroy
Hey do you mind sharing a couple of commands with me in C# on how to write the prl n nv items please.
Also I have been trying to send commands from a windows based form in C# but I can figure out how to do it properly.
Thank You very much!
I just use batch scripts and run them.
filmaker said:
I just use batch scripts and run them.
Click to expand...
Click to collapse
U mean u can write prl, nam, and Evdo with a batch script?
Slinged from my iPhone 4 On Straight Talk using Tapatalk
Trying to be charitable and cautious, I'm trying to back up my EFS folder before I go messing around and it is consistently failing. I'm using:
SGS Tools Vz 0.5.7
Busy Box Vz1.17.2
On my previous captivate this works just fine. Now I get
"could not create backup folder /sdcard/SGSToolbox/backup (date string)" and then the bluebox saying creating backup. This never goes away and to clear I have to reboot.
Any helpful hints?
I tried to download the latest and greatest SGS Tools but Google knows I have it installed and won't let me get the newest one. Haven't figure out how to get around that unless I just have to un-install my current one.
Rooted 2.2, KB2, running existz KB1 kernel.
Knowing there are no successful backups... just successful restores.
If you're willing to use your computer and can get the Android SDK and ADB going, just get into a command prompt in the ADB directory and type "adb pull /efs". That will back it up to your computer.
Or you could open a file explorer and copy the directory from there to your sd card
You could use an app called nitrality
Sent from my SGH-I897 using XDA App
Try to update your su binary, the simpliest way is use Root Explorer to backup whatever u want
Well just to be daring, I tried to install the ADB tools. Had to install the Java development software first. After I installed what I thought was the ADB suite, I can't seem to find the place to type in commands, dumb as that sounds. I may not have gotten the right package. Going to tinker with it though.
My SU is up to date.
I can see the folder with Super Manager so I guess I'll just copy with that. Interesting though I can't see anything in the /efs directory. Probably just something else I don't understand.
Still curious though as to why SGS Tools is failing... part of my nature.
Thanks to all that replied.
Make a note of where adb is installed (e.g. c:\users\person\Android-sdk-windows\platform-tools). Then hit the windows key and R, and type cmd. Once in the prompt, type CD (directory from before, no parentheses) and hit enter. From there, type your adb commands.
Ahhhh.... I get it. Was expecting something a bit more elegant. Gotta love DOS commands.
Well..there are a couple more elegant ways to do it.
Open up a new note in NotePad, just type:
Cmd
Exit
And save, but instead of a .txt file extension save it as a .bat, now drop that into your adb directoty, then just double click on that to open a prompt in that directory, so you don't have to do the cd command every time.
Or..the most elegant way is to add adb to your environmental variables so you can enter adb commands from anywhere
That's a good solution. I've got a set of files put into my C:\Users\(my username) folder called "adb", "adbr" (adb reboot), "adbrd" (adb reboot download), and "adbrr" (adb reboot recovery).
Each of these is a .bat file with a version of this text in it:
@ echo off
cd "C:\Users\(me)\Other\tools\android-sdk-windows\platform-tools"
adb reboot
That way, all I have to do is hit Win-R and type one of those file names and it does that command for me. Or, I can type cmd, then adb, and automatically be where adb is installed without cd'ing through a long file list.
My suggestion is Root Explorer. I was able to backup the EFS directory without problems also create a .tar file.
I used root explorer to do my backups, another option is the explorer inside the rom tollbox aplication its also very good
Now I have another adb question...
First off, now I'm just trying to learn and get better. I've built my bat files and I can get adb working. Thanks to those that helped with that. When I tried to pull the /efs folder it said there was no device recognized. I was in "mass storage" mode at the time.
Whenever I've seen people talk about using adb, I don't recall anything being said about if it should be in Download, debug or what. One of those assumed knowledge things.
So what do I have to do to the phone to let adb recognize it?
gnawing on the bone....
I'm also thinking of pulling a logcat or something when SGS tools fails... just to see. That's my next step.
Enable usb debugging in settings> applications> development
SGS Toolbox doesn't work with efs backups. Are there easier ways to do the backup?
Adb or root explorer.
I did both... just to say I did it and finally got adb working.