I edited some icons, like battery indicator and icons for wireless, network, ..
packed them into the framework-res.pk and pshed them to the phone.
Only battery icons show up, network icons and such do not show.
did hard reset, cleared cache, everything
Please help me?
anyone????
after reflashing the phone, i pushed the apk again, now its working..
Related
Hey everyone, how's it going.
Lately I've been having some problems with metamorph installed on my mytouch 3G running cyanogen mod 6.1.0. For some odd reason it says that everything has been applied but nothing is ever applied, any reason why it's doing this?
Bumpppppppppppp.
Androidfanatic2 said:
Hey everyone, how's it going.
Lately I've been having some problems with metamorph installed on my mytouch 3G running cyanogen mod 6.1.0. For some odd reason it says that everything has been applied but nothing is ever applied, any reason why it's doing this?
Click to expand...
Click to collapse
it could be a few reasons.. if your phone is utilizing the drawable-mdpi folder instead of the HDPI (low/high res) then it will think it's been applied but it won't change.. also if the cm version on that phone isn't deodexed then some mm themes won't change anything...or if that cm has options for custom stuff, you might have to enable/disable those settings.... what are you trying to theme anyway?
I'm having the same problem on my N1 with CM6.1.1
Metamorph goes though everything and prompts me to restart to apply the changes but nothing is changed. I am trying to change icons in the status bar, on one occasion the battery icon changed but then changed its self back a few seconds later.
I am new to metamorph and already have a custom theme installed by flashing in recovery... could this be causing this problem?
Cheers people
Depending on where you got the icons for the top statusbar, some phones use the drawable-hdpi folder and some use the drawable-mdpi one... if you got an icon set meant for one, but your phone uses the other, it won't change anything..even if mm says all themes applied... typically already having a custom theme won't affect metamorph tho.. if you can't figure it out, link the icon set you are trying to apply and I'll look at it for ya.. on the battery issue, some roms read in 1%, 10% or even just 20% increments so if you have a battery icon you apply that is only set up for 20% readings but your ROM reads in 10%, the battery will switch back and forth as those increments are hit...
Yep your right, i had a batt icon that went up in 1% and the new one only in 20% so i at the 20% increments i have the new icon and for every other percent i have the old one! I've tried changing the wifi and signal icons and these have both been fine! Thanx alot mate!
You dont happen to know where i can get loads of different icons from do ya? I wanna try loads out now! haha.
Edit* Also if i want to keep a battery icon that only goes up in 20% increments how do i stop the other icon coming through for the other percentages? Cheers!
Okay I have the EVO 4g now, and the HTC hero cdma before this, with the same setup...
My issue is more of an annoyance rather than an actual problem...
After installing UOT Kitchens Battery, Color Icon Pack v7, Font, and Overscroll Mods and flashing( even cleared dalvik and cache immediately after flashing UOT) on reboot I opened theme Chooser and selected the new theme created by UOT..upon selecting I received an error popup saying something to the effect of not everything was compiled correctly or something like that, and offered to cancel or apply anyway... I hit apply anyway, and the theme works greats
But my annoyance is this... within the preview of the status bar icon mod on UOT Kitchen.. the Color Icon Pack v7 has several different signal icons.. some showing the 'G' ...some showing 'C' ...some showing the triangle roam idicator..
My phone is CDMA not GSM.. so why does my signal Icon show a 'G' above the signal bars signifying that I am on GSM when in fact im CDMA
Is there anyway to modify this to show the 'C' or no letter indicator at all perhaps... it just bugs me that its show a G for GSM rather than being correct...
any help is appreciated!
Oh I forgot to to add, that this started after adding the UOT mod... so maybe it's in the framework-res.apk?!
I'm Stumped...
I have a T-Mobile Tab and it was running Jupiter and used UOT kitchen to change the icons everything worked perfectly. I then updated via no wipe to Kratos and wanted to change to different lock-screen, signal bar icons and battery icon with UOT kitchen, everything changed except signal bar icons. I figured it was Kratos and went back to Jupiter and now it is doing the same thing signal bars staying the same(blue Kratos bars) when at the beginning everything worked. Any ideas whats going on?
TheHypebeast said:
I have a T-Mobile Tab and it was running Jupiter and used UOT kitchen to change the icons everything worked perfectly. I then updated via no wipe to Kratos and wanted to change to different lock-screen, signal bar icons and battery icon with UOT kitchen, everything changed except signal bar icons. I figured it was Kratos and went back to Jupiter and now it is doing the same thing signal bars staying the same(blue Kratos bars) when at the beginning everything worked. Any ideas whats going on?
Click to expand...
Click to collapse
Me too, me too! Loving the kitchen, but not all features are working. Had to manually extract and move the settings apk into the data folder to get bits like the pull down bar to mod. But the status bar icons won't change. I'm on kratos too. This is most frustrating! Any ideas anyone?
Found Solution?
Well I posted this and waited some time and got no responses, I figured it had to be something simple and remembered that on the overcome website there is a tweaks section. I ran the GPS lock tweak, once it finished applied my UOT folder and everything worked the signal bars changed! Hope this works for you.
biffroy said:
Me too, me too! Loving the kitchen, but not all features are working. Had to manually extract and move the settings apk into the data folder to get bits like the pull down bar to mod. But the status bar icons won't change. I'm on kratos too. This is most frustrating! Any ideas anyone?
Click to expand...
Click to collapse
Hello all,
Here's my question/problem:
After applying a UOT Kitchen file containing only a battery mod, then subsequently restoring from a nandroid back-up because I didn't like the style, the status/notification bar will remain black and not transparent after rebooting the phone.
I do not have my home screen set as the "Blink Feed" but a standard panel, and as such the status bar should be transparent (which I am quite fond of). However, since applying the battery mod and restoring from a nandroid backup, when rebooting the phone and first going through the lock-screen, the status bar will remain black. I can "fix" this problem simply by pressing the power button, locking the phone, then going through the lock-screen again, and now the bar will be transparent. But another problem presents itself after that, when opening any application that changes the status bar from transparent to black, then going back to the home-screen, there will be a one second delay between the status bar changing its transparency, I don't remember this happening before I applied the battery mod etc.. Also, when going through the lock-screen (after the initial boot/first lock-screen) the status bar will change from being transparent, then going black for about one second, then becoming transparent again.
Though this isn't a major problem, it's not something I can live with.
I have tried fully wiping my phone, removing all system data and then just applying a custom ROM. This didn't help.
I have also tried replacing the "framework-res.apk" & "SystemUI.apk" files with the originals from a back up (before the battery mod was applied). Again, did not work.
If anyone has had a similar problem or knows a solution, please help me!
Thanks in advance.
Oh, and here's my phones details:
Stock ROM + Root.
TeamSeven Kernel - Performance Edition - v4. (the kernel was applied before this problem occurred, so I don't believe this is the source of my trouble.)
UPDATE: After hours of searching and attempting several "solutions" I decided to flash a different kernel, so now I'm running the ElementalX 1.0 kernel and the problem has been fixed. I believe it was an issue with the Aroma installer rather than teaMSeven's kernel. Anyway, all's well that ends well, I suppose...
I want to hide sim card and WiFi icon from status bar so that i can view other app icons which r more important than these obvious icons
Sorry but you cant
Sent from my COR-AL00 using Tapatalk
Check this, it works for me
https://forum.xda-developers.com/huawei-p20-pro/how-to/guide-hiding-status-bar-icons-t3853258
You can also use SystemUI Tuner from the Play Store. Works pretty well.
Both of these solutions can only disable WiFi, trying to disable other icons resets the whole thing. Same deal with opening the SystemUI Demo using activity launcher.
I'm on COR-L29 8.2.0.131
I removed nfc, eye protection, wifi and not disturb icons by adb method. Do you tried this?
Grizmo123 said:
I removed nfc, eye protection, wifi and not disturb icons by adb method. Do you tried this?
Click to expand...
Click to collapse
Based on the link what is the command for do not disturb icon ?
I have managed to turn off all the ones I wanted to turn off except the do no disturb icon.....
I tried do_not_disturb , but that did not seem to work.
Also is there a command to reset the status bar icons, incase I want to bring back some icons ?
I dont know how to reset it, but not disturb is "zen"
Brilliant Ty, only one I wish I had not removed is WiFi, do you know the command to put it back on?
Okay, great news, I had taken off various icons a couple of days ago, great , but I had taken one off one I wish I had kept, but also needed to remove another one.........anyway I used the ADB command and only entered the one icon in the list I wanted to remove and then ADB rebooted.....to my surprise all my icons came back on, all except the one I had added to my remove list, so basically the line of code written changed to only remove one icon as opposed to remove all previous icons and then one icon I had just added........SO if you are not happy with your choices, simply re do the process and add the icons you would like to be removed and reboot, the Icons removed will be just the ones on the list you just made and any you wish you had not removed will be returned.......