Related
hi all ... am facing a BIG problem ... was using a tm G1 from Europe (RC7) version which i bought from the local market .. it was probably used by someone in UK but now its here and we could use it with any local sim. ...
i tried to gain root access to the phone by following instructions from the site
http://coolpstuts.blogspot.com/2009/07/how-to-mod-root-jailbreak-your-g1.html
now once the phone restarted after the innitial updation the phone naturally wanted me to sign into my google account (which im assuming is the regular gmail account) but all the access points are from TMobile operators and even if i try to change the access points to the ones of my local carrier it wont connect... as if there is no internet connection.
now the situation is that iam stuck while everytime i restart the phone it asks me to signin to my gmail account and i cant do that since i have a different operator. I need to UnLock the phone to other operators i believe so that it can read my SIM ....
Please HELP !!!
so do you have root access or not? if you do have root access then you can either flash a rom that is ADP based which will allow you to skip the initial setup or, go to this thread and
download file from the second post
remove .zip extension
place file on the root of you sdcard (the upmost folder)
boot into recovery (home and power)
go to the recovery console
press enter
type mount /system
then type mount /sdcard
then type cp /sdcard/apns-conf.xml /system/etc if the cp command will not work substitute it with mv
finally type reboot
if this method doesn't work then just flash an ADP based rom.
if you do not have root then look at this thread.
shoeibyarsheikh said:
now once the phone restarted after the innitial updation the phone naturally wanted me to sign into my google account (which im assuming is the regular gmail account) but all the access points are from TMobile operators and even if i try to change the access points to the ones of my local carrier it wont connect... as if there is no internet connection.
now the situation is that iam stuck while everytime i restart the phone it asks me to signin to my gmail account and i cant do that since i have a different operator. I need to UnLock the phone to other operators i believe so that it can read my SIM ....
Please HELP !!!
Click to expand...
Click to collapse
If you insert a non-T-Mobile SIM into a locked G1, it will present a lock screen before it shows anything else. So I am guessing your G1 is already unlocked? You just need to press menu at the Google sign-in screen and enter a new APN. Remember to open the menu and tap save when you are done entering the APN info.
shoeibyarsheikh said:
now the situation is that iam stuck while everytime i restart the phone it asks me to signin to my gmail account and i cant do that since i have a different operator. I need to UnLock the phone to other operators i believe so that it can read my SIM ....
Please HELP !!!
Click to expand...
Click to collapse
You only have to sign in to Gmail once after the initial flashing of the rom. Now, you phone HAS to be unlocked in order for you to even get to the sign-in screen with non-T-mobile SIM. Sounds like all you need is APN Settings from your provider. Once you have those, hit menu button at the sign in screen and put them in. You should be good to go.
Good luck, let us know how it turns out.
wow guyz it worked.... cant thank you much !! i just threw in the correct settings and it went all good
my current situation is that i added "DREAIMG.NBH" and updated the phone with the file. ..
the second portion of the update was to reboot and than do the telnet thingy which i didnt do as of the moment .... this i was doing to gain ROOT access to the phone ... do you think that i should complete the TELNET portion of the update as well and than continue with anything or is there any way to upgrade to cupcake 1.5 (my ultimate goal) without gaining the root access ?
shoeibyarsheikh said:
wow guyz it worked.... cant thank you much !! i just threw in the correct settings and it went all good
my current situation is that i added "DREAIMG.NBH" and updated the phone with the file. ..
the second portion of the update was to reboot and than do the telnet thingy which i didnt do as of the moment .... this i was doing to gain ROOT access to the phone ... do you think that i should complete the TELNET portion of the update as well and than continue with anything or is there any way to upgrade to cupcake 1.5 (my ultimate goal) without gaining the root access ?
Click to expand...
Click to collapse
If you just want to update to 1.5 without gaining root, find a T-Mo EU update.zip file and run it in the recovery.
although the phone is unlocked (as per the experience) but if (lets say) i do update the phone to 1.5 without the root gain ... will it lock the phone again or something (asking me to enter only T-Mob SIM only) ??
shoeibyarsheikh said:
although the phone is unlocked (as per the experience) but if (lets say) i do update the phone to 1.5 without the root gain ... will it lock the phone again or something (asking me to enter only T-Mob SIM only) ??
Click to expand...
Click to collapse
No, there is probably no way to re-simlock a phone once it has been unlocked. Remember that the state of the simlock is stored internally in the baseband processor and is not affected at all by what you do on the main processor or in the accessible memory spaces.
thanks alot jashsu and others ... will bug u guyz laterz for other stuff ...
I just bought a HTC G1 from an ebay user from USA.(I'm from Romania)
I did a hard reset on the phone and now when I put a sim I need to enter the unlock code and can`t turn wireless on if I chose not to enter the unlock code.
Are there any option on how to unlock the phone without the code, or to get past the 'fresh start' screen?
Two things you can do:
1st, contact the user back that sold you the G1. Ask them to obtain the unlock code from T-Mobile (USA) to send to you.
2nd, you can obtain the unlock code yourself by purchasing the unlock code from one of the site.
There are no option to unlock the phone without the unlock code. (as far as I know)
And what about the activation screen? how can i get past it?
Once you get the unlock code and put it in. You can activate your google account with your data plan. You might have to setup your APN setting thou.
Another thing you might or have to do is downgrade and root your phone. Then flash the custom ROM of your choice.
Done unlocking & activating, now it keeps restarting, what can I do? Also the battery lasts 1 day max
// also the screen remains black when I try to unlock (sometimes)
tachemario said:
Done unlocking & activating, now it keeps restarting, what can I do? Also the battery lasts 1 day max
// also the screen remains black when I try to unlock (sometimes)
Click to expand...
Click to collapse
First you want to find out if you are still on stock or you have a custom ROM on your G1.
If you have stock, then you have to root your G1 first.
If you phone has a custom ROM then you G1 has already been rooted. You can load other ROM that you want.
I tried to update to 1.6 but it says error line 1 etc. all the time.
Please help
I`m on stock & when I try to root it says to force close app
Also, i`m running android 1.5 & marketplace is beta & I can`t see all the stuff
Ohh! Boy here we go. You'll need to downgrade to RC29 (since your G1 is from US). Don't worry about the unlock. Once unlocked it stay unlock.
First you want to get ADB setup on your PC and have it setup with your G1.
http://forum.xda-developers.com/showthread.php?t=532719
Once you have that going then you can start with the downgrading to RC29. After you have downgraded, you will have to go through the activation screen again.
Once the activation screen is done, then you can do the rooting process.
http://theunlockr.com/2010/04/26/how-to-root-the-htc-g1dream/
After you have rooted, then you can flash the custom ROM.
Done, the phone is rooted but now I have some other issues with it.
First, my earpiece dosen`t work
Second, my screen sometimes dosen`t come 'back to life' when I try to unlock it
http://www.youtube.com/watch?v=0qk3FIs3Q-s&feature=related
this problem
Can anyone help me?
hi,
I bought a X8 by mail delivery from the internet and got a bricked phone (so it seems)!
Symptom is phone doesn't connect to GSM network, and although i can scan for networks i can't connect to them. Tried several networks, same result. Everything else seems to work fine.
I'm completely newbie to Android phones, and only bought this one to try to avoid to stay behind, but this was a lousy way to start. I've been browsing through the forum, but there's too much info which only makes it more confusing to me.
I tried connecting the phone to S1tool and msm7227setool but i can't find the SEMC flash drivers, and although i browsed through the forum stickies for them i didn't find them.
So, my questions are:
1- Can someone provide a link to the drivers?
2- Is the following link the best way to solve my problem?
http://forum.xda-developers.com/showthread.php?t=1304258&highlight=no+network
3- I also want to debrand the phone, from the 360 apps i assume the phone is from vodafone. Can you recommend a fast ROM with full features support? And a good noob proof flash tutorial..
4- Will any of the above operations remove my SP unlock?
Sorry if most (or all) of this questions are a repetition of past threads, but starting with a phone this way, i honestly feel like a donkey looking at a palace! (Portuguese proverb, not sure you'll understand)
Thanks, Regards!
madz78 said:
hi,
I bought a X8 by mail delivery from the internet and got a bricked phone (so it seems)!
Symptom is phone doesn't connect to GSM network, and although i can scan for networks i can't connect to them. Tried several networks, same result. Everything else seems to work fine.
I'm completely newbie to Android phones, and only bought this one to try to avoid to stay behind, but this was a lousy way to start. I've been browsing through the forum, but there's too much info which only makes it more confusing to me.
I tried connecting the phone to S1tool and msm7227setool but i can't find the SEMC flash drivers, and although i browsed through the forum stickies for them i didn't find them.
So, my questions are:
1- Can someone provide a link to the drivers?
2- Is the following link the best way to solve my problem?
http://forum.xda-developers.com/showthread.php?t=1304258&highlight=no+network
3- I also want to debrand the phone, from the 360 apps i assume the phone is from vodafone. Can you recommend a fast ROM with full features support? And a good noob proof flash tutorial..
4- Will any of the above operations remove my SP unlock?
Sorry if most (or all) of this questions are a repetition of past threads, but starting with a phone this way, i honestly feel like a donkey looking at a palace! (Portuguese proverb, not sure you'll understand)
Thanks, Regards!
Click to expand...
Click to collapse
I have a X8 on Vodafone, and when I repairded my X8 in PCC it removed the vodafone apps and icon from Settings :-D
Sent from my tablet running Honeycomb
IrishStuff09 said:
I have a X8 on Vodafone, and when I repairded my X8 in PCC it removed the vodafone apps and icon from Settings :-D
Sent from my tablet running Honeycomb
Click to expand...
Click to collapse
Just 4 curiosity how to make the vodafone icons appear again??just4fun
Sorry for off-topic thing
As irishstuff said u should try to update your phone with pc companion(google it) and try to update the software.After that if u want to root your phone and install recovery search in xda for x8toolbox , is the most noob-friendly thing u will find
X8invisible13 said:
Just 4 curiosity how to make the vodafone icons appear again??just4fun
Sorry for off-topic thing
As irishstuff said u should try to update your phone with pc companion(google it) and try to update the software.After that if u want to root your phone and install recovery search in xda for x8toolbox , is the most noob-friendly thing u will find
Click to expand...
Click to collapse
Thanx for clarifying that.
But, if i update the phone via PCC, won't i lose the sp unlock? I'm saying this cuz i read that the no network problem is due to sim lock protection.
madz78 said:
Thanx for clarifying that.
But, if i update the phone via PCC, won't i lose the sp unlock? I'm saying this cuz i read that the no network problem is due to sim lock protection.
Click to expand...
Click to collapse
sp unlock? You mean "SIM unlocked"?
No, you won't lose the unlocked SIM by simply flashing back to Stock through PC Companion (in case PCC tells you that there's no update available you need to resort to the Flashtool method).
As for the drivers ... best method would be to install PC Companion. However, if you don't want that crapware on your system I can upload you the drivers (out of PCC) in a ZIP - then you have to point Windows manually to the directory so it can find the appropriate driver (EDIT: shouldn't be much of a trouble if you're familiar with installing drivers by pointing Windows to the directory or the INF file).
The only situation where you might lose your SIM unlock is at unlocking the boot loader to enable installation of custom kernels, but before you head into that you better check the manufacturing date of your phone (sticker below the battery) and then look through this forum to work out if it's a candidate for hard bricking or not.
B.Jay said:
sp unlock? You mean "SIM unlocked"?
No, you won't lose the unlocked SIM by simply flashing back to Stock through PC Companion (in case PCC tells you that there's no update available you need to resort to the Flashtool method).
As for the drivers ... best method would be to install PC Companion. However, if you don't want that crapware on your system I can upload you the drivers (out of PCC) in a ZIP - then you have to point Windows manually to the directory so it can find the appropriate driver (EDIT: shouldn't be much of a trouble if you're familiar with installing drivers by pointing Windows to the directory or the INF file).
The only situation where you might lose your SIM unlock is at unlocking the boot loader to enable installation of custom kernels, but before you head into that you better check the manufacturing date of your phone (sticker below the battery) and then look through this forum to work out if it's a candidate for hard bricking or not.
Click to expand...
Click to collapse
Yup, it says up to date, just clicked repair to see if it works. crapware.. lol, yeah i'd appreciate that zip file, thanks.
I think the issue is exactly that, a bad boot loader unlock, at least all symptoms point to that.. all i see in no network threads seems to be pointing there.
Thanx!
P.S.- SP (service provider) Unlocked.
madz78 said:
yeah i'd appreciate that zip file, thanks.
Click to expand...
Click to collapse
Download here
The Sony Ericsson X8 (and possibly other SE phones) Android drivers (ADB / Smartphone / USB Flash Device) for Windows (incl. x64 Editions) out of the latest and greatest PC Companion crapware.
madz78 said:
I think the issue is exactly that, a bad boot loader unlock, at least all symptoms point to that.. all i see in no network threads seems to be pointing there.
Click to expand...
Click to collapse
Errr... no. A "unsuccessful" boot loader unlock would turn your device into a hard brick (no lights, no vibration, no screen). As you're able to boot up into Android the bootloader and kernel seems to be intact.
IF the previous owner (in case you bought it used) tinkered around with boot loader unlocking ...
Use the s1tool to verify if the boot loader is locked or not. If it's unlocked simply follow the tutorial in the Development section to relock the boot loader or try the trick deedii posted about first (she had the same problem that GSM radio went dead after unlocking the boot loader).
---------- Post added at 12:40 AM ---------- Previous post was at 12:36 AM ----------
*ping* driver ZIP download link inserted
Holy crap!
Thanx for the zip btw..
I hit Repair in PCC and it re-flashed the phone. Now, instead of no network, the phone doesn't recognize ANY SIM card!!
I checked boot loader with S1tool, and the phone is locked (i see R).
I'm starting to think maybe it's a hardware problem and not from ROM.
Any ideas? Thanks.
madz78 said:
Thanx for the zip btw..
Click to expand...
Click to collapse
No problem, you're welcome.
madz78 said:
I hit Repair in PCC and it re-flashed the phone. Now, instead of no network, the phone doesn't recognize ANY SIM card!!
I checked boot loader with S1tool, and the phone is locked (i see R).
I'm starting to think maybe it's a hardware problem and not from ROM.
Any ideas? Thanks.
Click to expand...
Click to collapse
Yes, the "R" means the boot loader is locked.
As for the mSD card ... here's where we enter "trouble reloaded":
- What card? Class? Size? Brand?
- Does the card hold any important data? If not try to reformat the card (FAT32!!!). If Android refuses to format the mSD simply use a card reader and re-format the mSD in Windows.
EDIT: Also, just to make sure everything's vanilla: could you please take a look into Settings -> About phone to confirm you're running the genuine SE baseband/kernel and not some custom kernel?
EDIT 2: Errrrrrrrr.... never mind ... I somehow misread "SIM card" as "SD card". My fault!
X8invisible13 said:
Just 4 curiosity how to make the vodafone icons appear again??just4fun
Sorry for off-topic thing
As irishstuff said u should try to update your phone with pc companion(google it) and try to update the software.After that if u want to root your phone and install recovery search in xda for x8toolbox , is the most noob-friendly thing u will find
Click to expand...
Click to collapse
I actually don't have a clue, but I was glad when thety went
I dont like operators branding the phone with the software
The only apps i had by the operator (vodafone IE) were
Gold Rush, Vodafone Music Store, SIM Settings and SIM Toolkit <- I have GDX and i still have toolkit. XD
I had the 'vodafone 360' option in Settings
Sent from my tablet running Honeycomb
B.B.- M76XX-TSNCJOLYM-53404015
kernel- 2.6.29 [email protected] #1
Thanks again.
madz78 said:
B.B.- M76XX-TSNCJOLYM-53404015
kernel- 2.6.29 [email protected] #1
Click to expand...
Click to collapse
Yes, that's definitely the genuine baseband and kernel.
However, no matter how hard I think it through I don't see a good reason why it won't accept ANY SIM card, as a SIM unlock (or carrier/operator unlock if you want to put it that way) is as good as permanent unless you play around with unlocking the bootloader and either do something wrong or face the problem that it suddenly reverts back to the original SIM lock (in case it got unlocked and didn't ship unlocked by default).
The only problem I know about is ... if you live in a region where you would actually need a E15a baseband but happen to have the E15i baseband (you know, has to do with the frequencies that get used to transmit between your phone and the tower) flashed - or the other way around - you won't be able to connect to the GSM/3G network - but even then the phone won't reject the SIM card but simply fail to find any network.
In that case the problem resolve would be as easy as swapping out the baseband through flashing by Flashtool.
Good morning,
This keeps getting more and more confusing... thank god you've been such a valuable help BJ!
Dunno if it's "don't accept SIM" as much as don't recognize them.. I usually remove PIN codes from all my SIM's but today i've popped a new one to see if anything different happened.. The phone asked me for pin and validated it, but after this it doesn't recognize it anymore, i get a SIM with a red "!" on top of it in the upper right corner of the screen (same icon you get without SIM in phone).
As for all the other cards, it doesn't appear such icon, the phone starts normally and then asks for language and after asks to "insert SIM and restart phone"..
I don't think baseband is the problem, i think it's definitely related to SIM card reading.
NOTE: Before seemed irrelevant but now seems important to say, before, when i scanned for networks and tried to connect to one (same from SIM), phone gave me a message saying something like "your SIM card doesn't allow connecting to this network".
The problem seems to be definitely SIM card reader, the big doubt is if it's HW or SW.
My best guess is SW, because he can read PIN's but then just locks.. Where is the SIM card reader "driver"? baseband, kernel, ROM? should i try to update all those?
Thanks again!
hello again,
i found this in SETool forum which seems to be exactly my problem.
E15i - (x8) it doesn't read sim card and hangs during unlocking
I've had a problem with XPERIA X8 (E15i) for a long time now and I can't fix it.
I was trying to unlock it. I updated Android to v. 2.1. I have credits, I turn on debugg mode, I installed drivers. I push 1,2,5 and press Unlock/Repair.
Unfortunately it didn't finish, the program froze and switched off (on Vista). It took 5 credits. After turning it back on it wouldn't log to the network, even though it saw the network. But it shows that the phone is unlocked. By Setool I installed the version form after the update. After that it stopped detecting the sim card.
In hosting I read that I should repeat the unlock. I reinstalled the drivers, downloaded setool's previous version (v1.1106), but the program hangs every time in the same place and it doesn't go to the end (see screen below). With v1.1107 there's the same problem. I tried on Vista and XP – no difference. I installed setool on my other computer, where there are no boxes, drivers or antiviruses and still I couldn't succeed.
Does anyone have some expirience with the x8?
Thx in advance for help.
---------------
Reply
1.
reflash phone with generic 2.1 firmware, repeat unlock procedure.
2.
to restore phone to original state, write as script most earlier secunits backup from backup\%imei% folder
Click to expand...
Click to collapse
Could this be a bad unlock problem?
Thanx.
IrishStuff09 said:
I actually don't have a clue, but I was glad when thety went
I dont like operators branding the phone with the software
The only apps i had by the operator (vodafone IE) were
Gold Rush, Vodafone Music Store, SIM Settings and SIM Toolkit <- I have GDX and i still have toolkit. XD
I had the 'vodafone 360' option in Settings
Sent from my tablet running Honeycomb
Click to expand...
Click to collapse
Sim toolkit is on every phone,not only on vodafone
Been reading more and more, and this seem to be a very common issue in SETool SIM unlocking. can anyone suggest a solution?
Thanks.
Hello again,
I've been trying to run msm7227 setool2 and semc, but seem to be getting nowhere.. enters debugging mode and nothing else. What am i doing wrong?
Also, i've read in the following thread that sometimes boot is unlocked and S1tool says it's locked, but i can't find SEUS to download anywhere in the forum..
http://forum.xda-developers.com/showthread.php?t=1404148&highlight=sim+card
HEEELLP!!!
Thanks.
Hi, madz ...
To pull it together:
- The "SIM reader" is a software that comes as a part of Android in the form of a system app (inside /system/app). You can't exchange the related parts as they are specific to the Android version, in case your thoughts are running into this direction.
- The problem with "SEtool" is more like this ...
Let us assume the phone was originally SIM locked (bound to only allow SIMs of a specific operator/carrier) and then got SIM unlocked. The original SIM lock will jump back into place once the the boot loader got unlocked.
My observation is that this problem should actually go away once the boot loader got re-locked again. That being said I also read various threads where the SIM lock didn't vanish and the phone had to be unlocked anew.
On another note, it also depends on how the phone got unlocked ... there's a difference if it got SIM unlocked through SEtool or through Omious (<-- I hope it's spelled right)
The one fact that remains: simply querying the boot loader status ("R" vs "r") does not make the SIM lock to fire.
- SEUS ... well ...
I found Update Service (SEUS) 2.11.10.7 in the depths of my hard drive. Going to slap it on MultiUpload for you in a minute - though I can't guarantee that it still works; all I know is that SEUS got discontinued (or something along that line). Wait for the edit of the download!
EDIT: MultiUpload swallowed the file --> Download link
---------- Post added at 01:07 AM ---------- Previous post was at 12:59 AM ----------
Missed this one ...
madz78 said:
I've been trying to run msm7227 setool2 and semc, but seem to be getting nowhere.. enters debugging mode and nothing else. What am i doing wrong?
Click to expand...
Click to collapse
Shouldn't you connect the phone in flash mode instead of USB-Debugging mode?
Flash Mode means:
- Pull the USB cable out of your computer but leave it attached to the phone
- Turn the phone OFF
- Start the software
- Press the Back button and connect the USB cable to the computer
KEEP THE BACK BUTTON PRESSED UNTIL THE PHONE IS RECOGNIZED!
(Note: Windows may want to install the "SEMC Flash Device" driver)
Hi BJ,
The phone is not locked! it accepts pin from all networks, but after this, simply doesn't read the cards anymore. I only talked about this because the thread i found in SETOOL forum explains in detail what's happening to me.
I dunno if what happens to people who have no network or sim locked due to bad boot loader unlock is the same or not. It would be nice to know, but in my thread no one except you steps up.
If unlocked, i believe it's SETool and not Omnius because i only see threads with this issue in SETool support (dozens of complains) and found nothing in Omnius.
I still believe that maybe there's a solution other than unlocking it again, but due to inexperience i fail to see it.
about msm7227: i'm sorry, i meant flash mode, and it detects the phone, sometimes.. but always hangs in 2nd line (can't remember what said, but i'll try it again in a while and post here).
Where exactly is the phone unlocked? ROM, kernel, baseband? Do you think re-flashing it could solve the problem?
Thanks again friend!
Regards.
madz78 said:
The phone is not locked! it accepts pin from all networks, but after this, simply doesn't read the cards anymore. [...]
I dunno if what happens to people who have no network or sim locked due to bad boot loader unlock is the same or not. It would be nice to know, but in my thread no one except you steps up.
Click to expand...
Click to collapse
My X8 came SIM unlocked by default. Since it's old enough, and therefore safe for boot loader unlocking, I gave it a try (even been as daring as to unlock while having GDX v021 flashed).
Connected and checked with s1tool that it's suited for unlocking: Pass
Unlocked the boot loader: Pass
Booted up (SIM does not have PIN1 set)...
Connecting to the GSM Network: Pass
Connecting to the APN for 3G Internet access: Pass
Reboot (to make sure it didn't brick): Pass
Re-locked boot loader: Pass
Checked with s1tool that boot loader is locked: Pass
Device still able to connect to GSM/3G: Pass
I didn't try to flash a custom kernel but just stayed with the stock kernel. During the whole testing scenario - from unlocking to re-locking - I didn't have any problems with GSM/3G network connectivity or troubles reading the SIM.
Like I wrote above the PIN1 check was disabled because sometimes GingerDX shows the "Network unlock" screen after inputting the PIN ... that's more-or-less a bug workaround.
madz78 said:
If unlocked, i believe it's SETool and not Omnius
Click to expand...
Click to collapse
Thank you for correcting the spelling of "Omnius" ... I was typing it from the top of my head and failed to recall how it's spelled.
madz78 said:
Where exactly is the phone unlocked? ROM, kernel, baseband? Do you think re-flashing it could solve the problem?
Click to expand...
Click to collapse
If you refer to "how is the SIM lock lifted" then I think the best persons to answer this question are the guys who cracked the boot loader. I don't know enough about how the low-level init of the phone really works ... the boot loader guys aren't very chatty about telling us how the low-level boot of the X8 works.
Since, in my case, the SIM unlock prevails when flashing a custom ROM on top of the stock kernel (keep in mind I never flashed a custom kernel, so I never altered the "baseband" partition) the unlock can't reside in the ROM partitions.
But ... as the problem only arises when tinkering around with the boot loader but didn't affect my phone during boot loader unlock / re-lock ... and this is now purely guessing ...
The boot loader unlock only replaces the boot loader binary with a altered one. So if the thing that tells the phone that it's SIM unlocked resides in the part of the NAND where the boot loader / kernel / baseband is located it can only be a digital certificate or some sort of a binary that gets loaded through "Stage 1" init (during which the boot loader and kernel gets loaded and all the security checking stuff happens). It can't be in the higher init routines where the initialized kernel is boot strapping the ROM as that would disable the SIM unlock when flashing a custom ROM.
If blagus or the kernel devs have some ideas it would be great to read a few lines from a source knowing about the low-level init routines (to actually understand how the X8 comes to life once the power button is pressed).
On another thought ... the msm7227 CPU also must have some kind of firmware (think of it similar to a BIOS like a PC has) to init itself and the hardware ... maybe the SIM unlock is somewhere in there?
EDIT: On a third thought ... it would seem almost logical that the SIM unlock stuff is stored somewhere in the "security" related part of the NAND (somewhere deep down at the low-level init). If the phone came locked and got unlocked at some point the original SIM lock will most likely spring back into place at boot loader unlocking - so the SIM locked/unlocked thingy has to be somewhere in the low-level boot init; otherwise it wouldn't disable a "soft unlock" once the boot loader got unlocked and replaced past the cracked one which bypasses a whole lot of the security checks so unsigned boot binaries (kernel) can be loaded and executed.
Hey guys,
So I need to unlock my Focus S and went to fastgsm.com, and there are two methods, one by USB and one via IMEI. Can anyone tell me what the difference is? I'm in the USA btw. Thanks!
tonynojutsu said:
Hey guys,
So I need to unlock my Focus S and went to fastgsm.com, and there are two methods, one by USB and one via IMEI. Can anyone tell me what the difference is? I'm in the USA btw. Thanks!
Click to expand...
Click to collapse
USB can be quicker and cheaper but more trouble sum to get working if it is possible at all (not all models work)
IMEI can take a while to come through and generally costs more, but is a lot easier to get working.
My phones yet to arrive so I cant say for sure what does and doesn't work, but after spending an hour or so researching unlocking via cable. it doesn't appear to be possible, in that the i937 isn't on any of the supported cable unlock lists..
I unlocked via USB and it worked fine. It's not working in Windows 8 though!
Also, in the event that the USB unlock doesn't work, the network unlock tool is actually displayed within the app, that you can then enter in the phone manually.
64GUNSHIP said:
I unlocked via USB and it worked fine. It's not working in Windows 8 though!
Also, in the event that the USB unlock doesn't work, the network unlock tool is actually displayed within the app, that you can then enter in the phone manually.
Click to expand...
Click to collapse
could you drop some details of where you did it?
still cant find any cable unlock sites that say they support the i937
FastGSM.com worked fine for me.
Sent from my SGH-i937 using XDA Windows Phone 7 App
Just tried to unlock my Focus S (updated via Zune to the latest 8773 version with Samsung drivers) using the USB method from FastGSM and the program failed to unlock my phone. Also tried using the program to unlock after restoring to a 7720 backup but usb unlock still failed - thinking it is the bootloader as its version number didn't revert to an earlier number even after restoration. Currently waiting for support from FastGSM to respond...
armodons said:
Just tried to unlock my Focus S (updated via Zune to the latest 8773 version with Samsung drivers) using the USB method from FastGSM and the program failed to unlock my phone. Also tried using the program to unlock after restoring to a 7720 backup but usb unlock still failed - thinking it is the bootloader as its version number didn't revert to an earlier number even after restoration. Currently waiting for support from FastGSM to respond...
Click to expand...
Click to collapse
Are you using Windows 8 by chance? It didn't work on W8 for me. The program actually displays the unlock code during the process. It's like "network code" or something in the dialog. You can simply enter that into your phone.
64GUNSHIP said:
Are you using Windows 8 by chance? It didn't work on W8 for me. The program actually displays the unlock code during the process. It's like "network code" or something in the dialog. You can simply enter that into your phone.
Click to expand...
Click to collapse
I am using Windows 7 Pro 64-bit. Hm...nothing like that comes up in the dialogue box of the FastGSM program. Here is the log (replace the IMEI and serial with X's):
7/4/2012 1:54:44 PM
1. Please ensure that battery of your phone is fully charged
2. Turn on your phone without simcard.
3. On keypad of your phone type ##634# and click "Call" button to show Diagnosis screen.
4. Type *#7284# onto Diagnosis screen, select "Modem, USB Diag." and confirm selection.
5. After the phone restarts please connect USB cable to your computer and to the phone
6. Wait until all drivers are installed.
7. Click "Next" button.
OPENING COM5 : [OK]
PDA VERSION : I937UCKJ1
CSC VERSION : I937ATTKJ1
PHONE VERSION : I937UCLE2
HARDWARE VERSION : REV1.0
BUILD VERSION : M7630A-AAEQMWZM-1.6.002407
PHONE IMEI : XXXXXX-XX-XXXXXX-X
PHONE SERIAL NUMBER : XXXXXXXXXX
PHONE MODEL : SGH-I937
PHONE PLATFORM : WP7_YUKON
BYPASSING MSL PROTECTION : [FAIL]
Log was created using FastGSM Client 1.0.0.65
Unfortunately no network code seems to be displayed
just to give an update, the fastgsm client is unable to unlock phones that have applied the new LE2 firmware update from samsung. they refunded my cost (rather than unlock it with IMEI for me :crying
if they won't.. try SAMSUNGimeiUnlock.com
i got mine there for my focus s
Can you guys tell me how much are they charging for unlocking Samsung focus s on http://www.samsungimeiunlock.com ?
and we are talking about network unlock right? could somone confirm if the below phone can be unlocked?
http://www.ebay.com/itm/AT-T-SAMSUN...0941959080?pt=Cell_Phones&hash=item4ab9a1a7a8
lsguntu said:
Can you guys tell me how much are they charging for unlocking Samsung focus s on http://www.samsungimeiunlock.com ?
and we are talking about network unlock right? could somone confirm if the below phone can be unlocked?
http://www.ebay.com/itm/AT-T-SAMSUN...0941959080?pt=Cell_Phones&hash=item4ab9a1a7a8
Click to expand...
Click to collapse
yeah it can be SIM unlocked via IMEI and if you don't update it (apparently) via USB cable as well.
One more question . Any other specific advantage on buying a unlocked device apart from price?
lsguntu said:
One more question . Any other specific advantage on buying a unlocked device apart from price?
Click to expand...
Click to collapse
Even being unlocked the chances are with the Focus S it will still be branded so the only difference buying unlocked against locked, is that its usually more expensive to buy an unlocked device, however unless you fail do to your research you will find that the price is usually about the same anyway, sometimes marginally more expensive, I suppose you could call it the "hassle tax"
My Experience with UNLOCKing Samsung Focus S i937
...this is is the worst to unlock. I went through 3 ebay sellers (range .99 to $25). No one could find a unlock code (but refunded my money...after complaining). I went to local 3rd party mobile phone shop...they couldn't find a unlock code.
I then went to FastGSM and selected USB unlock...since IMEI way hasn't worked. I paid, downloaded client...client connected..but didn't do anything.. I left it there for 30 mins. Contacted FastGSM, they referred me to online tutorial..which i followed to the "T". Still didn't work. So I deiced to hard reset my phone...still didn't work...i decided to update it to the latest version through Zune( DON'T DO THIS! without making a Backup first!! http://forum.xda-developers.com/showthread.php?t=13795711).. Then I found this thread...member "64GUNSHIP" stated that usb client doesn't work with Windows 8 ( which is what I was using). So I used another computer with Windows 7. The usb client works!!! I got unlock code...but somehow the "SIM Unlock Screen" didn't show up any more with or without a SIM card. [Unaware to me, the client somehow unlocked my phone without me entering the code]
So the entire time I was trying to figure out did the Zune update kill the Sim unlock menu, I tried the #7465625*638*CODE#. I even restored to a previous ROM Backup. The issue is that I was using an OLD OLD OLD Sim card from a different carrier that the phone didn't recognize. Once I put in a working Tmobile SIM ...everything worked great!
Hi to everybody.
After soft bricking my sim-unlocked X8 due to install attempt of the lates tGingerbread v23 rom with alfadons and overclock-module, I had to use SEUS to flash an OEM rom and baseband.
Now I tried to re-root and unlock the bootloader several times but unfortunately the last string in cmd window is: not recognized simlock... or something similar.
After doing a lot of forum search there are plenty of hints telling that there's nothing to do. no possibility to install custom rom.
I tried it anyway and still soft brick (SE logo appears and nothing else..)..
So I decided to re-flash the OEM Rom and use the phone this way BUT......it works fine only WITHOUT a sim card inserted. If the sim card is inserter no icons appear, no button working. The only thing you see is the background immage...
Can anybody help me??????
sputnik81 said:
Hi to everybody.
After soft bricking my sim-unlocked X8 due to install attempt of the lates tGingerbread v23 rom with alfadons and overclock-module, I had to use SEUS to flash an OEM rom and baseband.
Now I tried to re-root and unlock the bootloader several times but unfortunately the last string in cmd window is: not recognized simlock... or something similar.
After doing a lot of forum search there are plenty of hints telling that there's nothing to do. no possibility to install custom rom.
I tried it anyway and still soft brick (SE logo appears and nothing else..)..
So I decided to re-flash the OEM Rom and use the phone this way BUT......it works fine only WITHOUT a sim card inserted. If the sim card is inserter no icons appear, no button working. The only thing you see is the background immage...
Can anybody help me??????
Click to expand...
Click to collapse
Visit this link and read every step carefully..
It might help u...
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
sputnik81 said:
Hi to everybody.
After soft bricking my sim-unlocked X8 due to install attempt of the lates tGingerbread v23 rom with alfadons and overclock-module, I had to use SEUS to flash an OEM rom and baseband.
Now I tried to re-root and unlock the bootloader several times but unfortunately the last string in cmd window is: not recognized simlock... or something similar.
After doing a lot of forum search there are plenty of hints telling that there's nothing to do. no possibility to install custom rom.
I tried it anyway and still soft brick (SE logo appears and nothing else..)..
So I decided to re-flash the OEM Rom and use the phone this way BUT......it works fine only WITHOUT a sim card inserted. If the sim card is inserter no icons appear, no button working. The only thing you see is the background immage...
Can anybody help me??????
Click to expand...
Click to collapse
did u flash/downgrade to stock rom before unlock bootloader?
if not u should unlock bootloader with stock rom but not custom rom
According to that threat you linked me....I permanently bricked the phone as my phone was sim-unlocked with a tool different from semc or setc2 tool and I tried to unlock to bootloader....
No I'm really pi...ed off....
If I'm right I have to buy a new phone....
sputnik81 said:
According to that threat you linked me....I permanently bricked the phone as my phone was sim-unlocked with a tool different from semc or setc2 tool and I tried to unlock to bootloader....
No I'm really pi...ed off....
If I'm right I have to buy a new phone....
Click to expand...
Click to collapse
No, you dont have to buy a new phone.
Just go to the store and say that this happened when im updated my phone with pccompanion.
My buddy did that twice and they did believe him, and hes phone got repaired for free.
Skickat från min ST18i via Tapatalk 2
Unfotunately that's not possible as yhe phoen is an "3 italia" sim-locked phone bougth in italy obviously and I moved to germany now..... The bill is still at home in Italy....
3 Italy would immediately notice the phone has been sim-unlocked...and I would have to pay the whole listing proce of the period when I bought the phone and would have to pay a high penality too...
That woudl be more than 400 euro in sum.....not worth....
Thanks to everybody who tried to help me
sputnik81 said:
Unfotunately that's not possible as yhe phoen is an "3 italia" sim-locked phone bougth in italy obviously and I moved to germany now..... The bill is still at home in Italy....
3 Italy would immediately notice the phone has been sim-unlocked...and I would have to pay the whole listing proce of the period when I bought the phone and would have to pay a high penality too...
That woudl be more than 400 euro in sum.....not worth....
Thanks to everybody who tried to help me
Click to expand...
Click to collapse
Have you tried re-locking your phone? ONLY IN STOCK ROM, PLS!
How can I sim-lock it again?
sputnik81 said:
Unfotunately that's not possible as yhe phoen is an "3 italia" sim-locked phone bougth in italy obviously and I moved to germany now..... The bill is still at home in Italy....
3 Italy would immediately notice the phone has been sim-unlocked...and I would have to pay the whole listing proce of the period when I bought the phone and would have to pay a high penality too...
That woudl be more than 400 euro in sum.....not worth....
Thanks to everybody who tried to help me
Click to expand...
Click to collapse
Don't take it to the 3 store. Take it so the Sony Ericsson store and tell them what DevStaffAndroid said. You will need to have warranty though.
Sent from my X8 using xda premium
sputnik81 said:
How can I sim-lock it again?
Click to expand...
Click to collapse
1) Download the original stock rom. run flash tool to flash the stock rom.
2) Run S1 tool, press " RESTORE" button!
At the stage, no harm trying!