[Q] Few problems after flashing 1.1.0 on rooted NC... - Nook Color General

Ok, so I've had a rooted NC for a while with no problems. I even flashed the quickie screamer overclock mod. Well, after I flashed the 1.1.0 update (using Decad3nce's method on the Development Forum), I started having a few problems:
1) My overclock seems to have disappeared. I was stably running up to 900 Mhz on overclock before the update, but after the update, I noticed the browser to be more sluggish. When I ran SetCPU, it reverted back to stock 300-800 Mhz. Can I safely reflash the overclock rom?
2) My Market seems screwed up. When I checked out the new 2.2 market, I noticed that 2 of my apps required updates (Kindle and Titanium Backup). I tried to update, but the apps didn't seem to want to update. In fact, when I looked at the My Apps section in the Market, I could see them on the list as "FREE" instead of "Installed" even though they were, in fact, installed (just the unupdated versions). I managed to even run these apps successfully. I decided to uninstall and redownload. However, when I tried downloading again from the Market, it would appear to try to download but it never does. In fact, when I tried to download other apps that I never had on my NC (Tweet Deck), it would not download at all (but it would also appear in My Apps list as "FREE").
Help please.

1) Yes, it is infact safe to flash the oc kernel again, I recommend the 1100mhz kernel as I have been stable on it for some time.
2) Try clearing the data for the google framework aswell as the cache for the market.
Sent from my rooted Nook Color.

WiFi frequently disconnects on rooted NC (1.1)
I updated my autonootered NC from 1.0.1 to 1.1.0 using the Clockworks mod.
Everything seems to be working well except often when I wake the Nook up, there's no WiFi connection and it doesn't find the connection unless I turn WiFi off and then back on (in which case it'll find it and connect).
Any suggestions?
Thanks.

BarryR1 said:
I updated my autonootered NC from 1.0.1 to 1.1.0 using the Clockworks mod.
Everything seems to be working well except often when I wake the Nook up, there's no WiFi connection and it doesn't find the connection unless I turn WiFi off and then back on (in which case it'll find it and connect).
Any suggestions?
Thanks.
Click to expand...
Click to collapse
The 'wifi sleep bug' is reported by many and seems to be unresolved by most ... it is the primary reason many are staying on 1.01 until a really stable root comes around .. the advantages of 1.1 aren't really of much use to me, but YMMV .. the devs here are great!! but be sure you read the whole thread on something before you go for it and be sure if you are one of the first to try someone's work to realize that there is a risk ...

Related

[Q] Nook Randomly Rebooted into older firmware

Weird problem here, not sure if anyone else has seen this issue. I was running the rooted firmware 1.1 (and a 950Mhz UV/OC kernal) for the better part of the day today. After rebooting a couple of times to 'fix compatibility' with Spare Parts, I accidentally hit the 'Lend Book' app. It started to load the app, gave some kind of Barnes authentication error, and the Nook just shut down. When it rebooted, it started in the recovery screen for a few seconds, and then it loaded up the old 1.0.1 software, with no custom apps other than Market and Rom Manager. Luckily I had a backup from earlier in the day, but what gives? Is there something I did wrong to cause the nook to default to an older software?
This is being discussed in the 1.1 Flash ROM thread as well:
http://forum.xda-developers.com/showthread.php?t=932145&page=38
A temp fix I figured out is the "freeze" the program "DeviceManager" in Titanium Backup. That will prevent it from rebooting and resetting. I dont know what else it affects but you definitely cant use the B&N shop.
I guess I will have to use this method until someone finds a real fix as the ones on this forum dont block the authorization error.

market canno't run after upgrade to 1.1.0 with

nookcolor 1.0.0 with official update to 1.0.1 then with autoroot, that enable android market, and run smoothly
after update to 1.1.0 use the following rom [ROM] Nook Color V1.1.0_r2, market won't run anymore, I tried to
use http://market.android.com to install new apps, but it doesn't work too. does anyone have the clue?
[ROM] Nook Color V1.1.0_r2
http://forum.xda-developers.com/showthread.php?t=932145
tried to restore to origianl 1.0.0 rom, but it boot to Clockwork Recovery everytime
what do you mean market wont run? if you are getting the server error message just wait eventually it will work. it seems like with the new market, google is changing settings on peoples accounts which will block your device from accessing the market. i had the same problem but the next day it was gone.
if you tried to put your nook back to stock and now its only booting into CWR go to the developers thread and they have multiple ways to recover your nook
here
and here
To restore to stock you need to remove the SD card and then press and hold the power button until it powers off and then press to turn on, wait until the N appears and press and hold power until it turns off and then repeat this process for like 8 times or so and it will then update the firmware to stock.
Im seeing the same thing.. Ver 1.1.0 and get the Market Server error everytime i try to launch the Market.
I updated to 1.1 and then booted with Autonooter 3.0 image. The Market works fine setup wizard was all I needed and all my apps are there. So, it's not definitely not the B&N 1.1 update causing the problem.
Also couldn't get the market to run after upgrading to 1.1.0
Press the icon and it would flash a white screen then back to the app folder. Youtube was doing this as well and I was able to fix it by removing and reinstalling, but I can't do this with the market apparently (just keeps running the install then saying market not installed)
I tried to make anflashable evrsion of the vending.qpk but it didn't even run because I have no clue how to make flashable packages for CWR.
Any ideas? Kinda sux not having the market
Sent from my Nookcolor using tapatalk.
fwdixon said:
Any ideas? Kinda sux not having the market
Click to expand...
Click to collapse
Don't use CWN and that ROM then (not that there's anything wrong with it).
Backup anything you don't want to lose by copying it your computer in any way you can / want.
Instead try going back to stock like described here...
http://www.nookdevs.com/Flash_back_to_clean_stock_ROM
Then update to 1.1 from official B&N update found here...
http://www.barnesandnoble.com/u/nookcolor-support-software-update/379002520/?cds2Pid=35758
Then boot with AutoNooter 3.0 from here...
http://forum.xda-developers.com/showthread.php?t=942424
Connect to WiFi and then just follow the setup wizard.
After that...run the market, agree to market terms and you're done!
FYI, I didn't have to use Youtube to get the Market to work. The Setup Wizard worked all on it's own.
Ok, let me rephrase. Any ideas on why I can't instal the market. Tips to get it reinstalled? I did this once on my phone and I had to remove all traces of the market first, hurt I can't remember where all the files and folders were located.
I like using CWR as it is what I am familiar with
Sent from my Nookcolor using tapatalk.
Market runs -but not well...?
Total newbie - seamlessly rooted NC 1.1 yesterday - (so grateful to developers!)
One of the only problems I have encountered is with Market -- I've searched and searched these forums to see if anyone else is having a similar problem -- but have yet to find anything.
I am able to access Market, and download apps with no problem. The only issue is when I view anything in the Market, it only shows roughly 10 results in any list I view. If I do a search, it may indicate that there are 754 results but will only list 10-12 of the results. Not a dealbreaker of course but if there's a work around, or fix, I'd love to know.
TIA
frillitup said:
Total newbie - seamlessly rooted NC 1.1 yesterday - (so grateful to developers!)
One of the only problems I have encountered is with Market -- I've searched and searched these forums to see if anyone else is having a similar problem -- but have yet to find anything.
I am able to access Market, and download apps with no problem. The only issue is when I view anything in the Market, it only shows roughly 10 results in any list I view. If I do a search, it may indicate that there are 754 results but will only list 10-12 of the results. Not a dealbreaker of course but if there's a work around, or fix, I'd love to know.
TIA
Click to expand...
Click to collapse
Use AppBrain app. You're on older android market.
Took the gapps zip from the Monster package and removed all files except the contents of META-INF and the vending.apk and flashed in CWR, market back .
frillitup said:
Total newbie - seamlessly rooted NC 1.1 yesterday - (so grateful to developers!)
One of the only problems I have encountered is with Market -- I've searched and searched these forums to see if anyone else is having a similar problem -- but have yet to find anything.
I am able to access Market, and download apps with no problem. The only issue is when I view anything in the Market, it only shows roughly 10 results in any list I view. If I do a search, it may indicate that there are 754 results but will only list 10-12 of the results. Not a dealbreaker of course but if there's a work around, or fix, I'd love to know.
TIA
Click to expand...
Click to collapse
Turn your NC to landscape.

Issues with the update 1.2

I rooted my nook using MN 4.5.6 after I updated to 1.2
My device failed to reboot after I updated the flash player to 10.3, I suggest that no one does that.
Flash only works with built-in browser, for example if you install Dolphin browser it won't work on it.
I'm unable to update the market app like i have done in the past, thus the problem with tilting the device sideways to load more apps still remains.
Anyone has a solution to any of these issues?
bump bump bump
I wish I could be of some help, but at least I can reply as to whether I'm having the same issue.
My (well it's technically my wife's) NC came with 1.1
I updated that to 1.2 from the barnes & noble site, then rooted it with the latest manual nooter (4.5.18 I think.)
I did not update flash however, and flash works just fine in Dolphin HD.
The easiest thing to do would probably be to just flash to stock and then re-root it. You'll end up losing stuff, but it's probably the most sure-fire way to get back to a working state.
Edit: I have no idea what can be done about the market issue. I'm having that as well and it's kinda irritating.

[How To] rooted B&N (1.3) with market access working .... no really.....it's working.

[How To] rooted B&N (1.3) with market access working .... no really.....it's working.
My goal - a rooted 1.3 stock device that had full market access back the way 1.2 worked w/ market prior to the update.
I'll preface this by saying I've tried nearly everything from almost every post in XDA in the last month, but I still had no market access and had to side-load all my apks. I get the feeling that there are quite a few of us that tried manulNooter and various forms of tweaks but are still w/out market access so it is for us that I write this.
I read this today and with a slight tweaking of the steps, I now have ROCK SOLID full market access on the first try.
I'll flat out say that all of the work can be chalked up to other people's time and effort, it's only the steps that worked for me I'm outlining here.
Beforehand:
Make sure you have a bootable CWM card (linky)
Make sure you have updates 4.6.18 and 4.6.16a.
Get the B&N 1.3 update here since you're going to revert your NC back to stock
START:
1) Before updating to 1.3 firmware you are required to do a complete wipe (which requires an aborted power-up [simply hold power button down during the launch process] 8 times in a row - or MUCH easier: the following command using adbWirless ).
adb shell
echo -n -e "\x08\x00\x00\x00" > /rom/devconf/BootCnt
reboot
Click to expand...
Click to collapse
2) I waited for the whole B&N setup after the wipe and I went through the steps of registering the device to my B&N account, then I did a factory reset at the "Erase and Deregister the device". It relaunches B&N one more time. After restarting I simply shut down the device before registering it again.
3) I then plugged in my Nook via. USB cable to my PC. I copied the 1.3 update to the root folder of the NC via. the USB cable. You can obtain the 1.3 update here if you didn't earlier.
4) I unplugged the USB. After 2 min. the NC recognized the update, and it did it automatically. It went through a full boot and I then shut down the NC.
5) I put in my CMW SD card with 4.6.18 and 4.6.16a on it. I then plugged in my USB cable into my Nook again to force the launch of CMW
6) In the CMW backup menu, I launched from zip file the 4.6.18, then right afterwards, the 4.6.16a nooters.
7) I shut down the NC, removed the CMW card, and did a regular launch.
8) I chose ZEAM launcher as default
9) I went into ROM manager and fixed permissions.
10) I went into the Market, signed in, and accepted the info, and saw the full, beautiful market populate and I'm good to go.
Hopefully this is a fix that works for everybody.....
(and yes - I know there's a separate thread on how to re-root after 1.3, but it's more of a troubleshooting thread at this point and frankly there's SO much conflicting info. in there I thought it prudent to start a new thread)
jnmoriginpoint said:
My goal - a rooted 1.3 stock device that had full market access back the way 1.2 worked w/ market prior to the update.
I'll preface this by saying I've tried nearly everything from almost every post in XDA in the last month, but I still had no market access and had to side-load all my apks. I get the feeling that there are quite a few of us that tried manulNooter and various forms of tweaks but are still w/out market access so it is for us that I write this.
I read this today and with a slight tweaking of the steps, I now have ROCK SOLID full market access on the first try.
I'll flat out say that all of the work can be chalked up to other people's time and effort, it's only the steps that worked for me I'm outlining here.
Beforehand:
Make sure you have a bootable CWM card (linky)
Make sure you have updates 4.6.18 and 4.6.16a.
Get the B&N 1.3 update here since you're going to revert your NC back to stock
START:
1) Before updating to 1.3 firmware you are required to do a complete wipe (which requires an aborted power-up [simply hold power button down during the launch process] 8 times in a row - or MUCH easier: the following command using adbWirless ).
2) I waited for the whole B&N setup after the wipe and I went through the steps of registering the device to my B&N account, then I did a factory reset at the "Erase and Deregister the device". It relaunches B&N one more time. After restarting I simply shut down the device before registering it again.
3) I then plugged in my Nook via. USB cable to my PC. I copied the 1.3 update to the root folder of the NC via. the USB cable. You can obtain the 1.3 update here if you didn't earlier.
4) I unplugged the USB. After 2 min. the NC recognized the update, and it did it automatically. It went through a full boot and I then shut down the NC.
5) I put in my CMW SD card with 4.6.18 and 4.6.16a on it. I then plugged in my USB cable into my Nook again to force the launch of CMW
6) In the CMW backup menu, I launched from zip file the 4.6.18, then right afterwards, the 4.6.16a nooters.
7) I shut down the NC, removed the CMW card, and did a regular launch.
8) I chose ZEAM launcher as default
9) I went into ROM manager and fixed permissions.
10) I went into the Market, signed in, and accepted the info, and saw the full, beautiful market populate and I'm good to go.
Hopefully this is a fix that works for everybody.....
(and yes - I know there's a separate thread on how to re-root after 1.3, but it's more of a troubleshooting thread at this point and frankly there's SO much conflicting info. in there I thought it prudent to start a new thread)
Click to expand...
Click to collapse
There is no 4.6.18 update - did you mean 4.518?????
Haven't tried this as I am using CM7 nightly builds ... but
Files that you need are here:
http://forum.xda-developers.com/showpost.php?p=17235819&postcount=1
Best regards,
-boggsie
docfreed said:
There is no 4.6.18 update - did you mean 4.518?????
Click to expand...
Click to collapse
Thks - yes - 4.5.18 - and fwiw, while I was super-happy about the progress - I turned off the NC last night and on launch this morning I'm stuck in a boot loop at the NC logo. Looks like I'm moving to CM7 and use the LCD density method to get market access. SO disappointing.
jnmoriginpoint said:
Thks - yes - 4.5.18 - and fwiw, while I was super-happy about the progress - I turned off the NC last night and on launch this morning I'm stuck in a boot loop at the NC logo. Looks like I'm moving to CM7 and use the LCD density method to get market access. SO disappointing.
Click to expand...
Click to collapse
Thanks for giving this a shot and posting your experience. I am hoping that one of the smart developer types will work on a Manualnooter (let's say 4.7.0) that will take us from stock 1.3 to root with a fully functional Market. Please, I know you are out there.
By the way, if you load CM7 with a -200 nightly or later then you will not need the LCD density fix as it has already been incorporated. Happy hunting!
jnmoriginpoint said:
Thks - yes - 4.5.18 - and fwiw, while I was super-happy about the progress - I turned off the NC last night and on launch this morning I'm stuck in a boot loop at the NC logo. Looks like I'm moving to CM7 and use the LCD density method to get market access. SO disappointing.
Click to expand...
Click to collapse
Did you update flash? Thats what causes the loop, I had the same thing happen to me and had to start again from scratch. Make sure you don't update flash through the market or this will happen again.
bobzdar said:
Did you update flash? Thats what causes the loop, I had the same thing happen to me and had to start again from scratch. Make sure you don't update flash through the market or this will happen again.
Click to expand...
Click to collapse
THANK YOU SWEET JESUS
I decided to revert to stock and every time I turned my nook off, there was no return. Every time I reflashed, after I nootered I updated everything from the market. I spent 2 hours trying to find the reason as to why I kept getting bootloops.
This fixed it.
turdferguson92 said:
THANK YOU SWEET JESUS
I decided to revert to stock and every time I turned my nook off, there was no return. Every time I reflashed, after I nootered I updated everything from the market. I spent 2 hours trying to find the reason as to why I kept getting bootloops.
This fixed it.
Click to expand...
Click to collapse
There is a fix to allow updated flash, can't remember which thread but after going through it I have updated to flash v11 without issue. I also got the (latest) market working by going into titanium backup and doing a data wipe of the market app.
Well, I followed all the given instructions, even bobzdar's method after reflashing for the 5th time. I still cannot get full market access. Even amazon market cuts me off. I've come to the conclusion that my only solution will be to move on to cm7. Honestly though, I prefer the stock rom over cm7.
All I want is cut the rope, and boat browser. Is that too much to ask for? lol
turdferguson92 said:
Well, I followed all the given instructions, even bobzdar's method after reflashing for the 5th time. I still cannot get full market access. Even amazon market cuts me off. I've come to the conclusion that my only solution will be to move on to cm7. Honestly though, I prefer the stock rom over cm7.
All I want is cut the rope, and boat browser. Is that too much to ask for? lol
Click to expand...
Click to collapse
For whatever reason, the market took a while to load the first time, but now it works whenever I go into it. Try opening it up and doing a search for something and see what happens. I did a search for flash after running the flash fix to go right to the updated v11 and it took 30 seconds to a minute for the search to go through, but once it did the market has worked normally since. It was odd, but what kicked the whole thing off was doing the data wipe in titanium backup and all of a sudden it auto updated flash and a few other things (indicating market was working), which necessitated doing the flash fix through CWM etc. Now everything is working properly, hopefully it's just working slowly like it was for me and you just have to kind of kick start it by doing a search.
Thanks for the detailed steps, and to bobzdar for his tips. I too was having the "Nook Col" problem even after having done the flash trick, so I started all over and all is working...
EXCEPT, now I can't download my B&N books. I get this error: "Unable to Download: Internal error: Exception executing the command".
I did update superuser among other things, not sure if that made any difference. It won't let me install the Nook app thru the Market, either.
Any suggestions? I'd like to read my books and would prefer NOT to do this all over again LOL.
zogg44 said:
Thanks for the detailed steps, and to bobzdar for his tips. I too was having the "Nook Col" problem even after having done the flash trick, so I started all over and all is working...
EXCEPT, now I can't download my B&N books. I get this error: "Unable to Download: Internal error: Exception executing the command".
I did update superuser among other things, not sure if that made any difference. It won't let me install the Nook app thru the Market, either.
Any suggestions? I'd like to read my books and would prefer NOT to do this all over again LOL.
Click to expand...
Click to collapse
New book or one already in your library? I just downloaded a book from my library without issue but I don't know if I've tried to download a new book since getting the market working again.
bobzdar said:
For whatever reason, the market took a while to load the first time, but now it works whenever I go into it. Try opening it up and doing a search for something and see what happens. I did a search for flash after running the flash fix to go right to the updated v11 and it took 30 seconds to a minute for the search to go through, but once it did the market has worked normally since. It was odd, but what kicked the whole thing off was doing the data wipe in titanium backup and all of a sudden it auto updated flash and a few other things (indicating market was working), which necessitated doing the flash fix through CWM etc. Now everything is working properly, hopefully it's just working slowly like it was for me and you just have to kind of kick start it by doing a search.
Click to expand...
Click to collapse
Well, evry time I did those steps, the market homepage/top apps or whatever seemed to show up blank, saying "No items found" or something like that.
I just decided to go back to 1.2. I like the new market better anyway.
bobzdar said:
New book or one already in your library? I just downloaded a book from my library without issue but I don't know if I've tried to download a new book since getting the market working again.
Click to expand...
Click to collapse
Already in the library. I have about 12 and can't dl any of them. Haven't tried to buy a new book yet, but I doubt that will work either.
It's frustrating because I was w/o the Nook for several days, did all this stuff and it works well other than this and limited market apps which I can live with.
I may have to go thru the whole process again and make sure I dl everything before I apply the hacks.

[Q] Rooted Nook HD+ boot problem

A question for any intellectual Android/Nook-addicts out there...
Basically, I've rooted my Nook HD+ (Numberous times now) and have experience rooting android devices in the past and have had no problems. I used the CWM method - installed universal root on factory stock (And afterwards, 2.1.0 stock just to see if it fixed the problem... it didn't) and extras (Tried not installing extras twice also, didn't make a difference)
Basically, I've learnt the hard way that eight resets on boot and the device hard-resets to factory stock. The first Root Bootup is fine (The bootup after removing the CWM sdc) and, after turning it off and on again, so is the second bootup... But the third one is where the problem occurs. I power on as normal, and the standard 'Nook' screen appears as it begins to boot...
It then proceeds to resetting itself eight times - never getting past the 'Nook' screen that appears at the start of every bootup, therefore causing a hard factory reset.
I've tried using the CWM recover method to the OS I used before rooting the nook originally, and there doesn't seem to be any problems if the device isn't rooted. I've also just let it update itself from factory version to current version - and it works fine with that also.
Perhaps this is common and I'm just a plain idiot. I honestly can't find any answers - so if it is common, sorry for wasting your time!
Thanks for your time!
- P
Do you have some apps being automatically installed by Play Store? Sometime people have their settings set so that happens. Then a root app gets installed and makes some changes to /system and causes a reset. Go to Play Store and tell it not to automatically install or upgrade apps.`
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Do you have some apps being automatically installed by Play Store? Sometime people have their settings set so that happens. Then a root app gets installed and makes some changes to /system and causes a reset. Go to Play Store and tell it not to automatically install or upgrade apps.`
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
No apps that automatically download that i can see. But you're likely onto something - I do install all the apps manually (No matter how menial) (Going through the list, hitting install for each of them) before manually logging into each one afterwards. I do use a few root apps - no ad-versions to avoid those annoying popups, Ultrabox, Superuser, Pimp my Android and Root Browser to name most, if not all of them.
I'm going to have to do things the awkward way now, installing each app, setting them to the setting I want for them, and seeing what happens. I have a mild suspicion it's a setting on Pimp my Android...
I'll let you know if I sort it. Thanks for the suggestion :cyclops:
P Complex said:
No apps that automatically download that i can see. But you're likely onto something - I do install all the apps manually (No matter how menial) (Going through the list, hitting install for each of them) before manually logging into each one afterwards. I do use a few root apps - no ad-versions to avoid those annoying popups, Ultrabox, Superuser, Pimp my Android and Root Browser to name most, if not all of them.
I'm going to have to do things the awkward way now, installing each app, setting them to the setting I want for them, and seeing what happens. I have a mild suspicion it's a setting on Pimp my Android...
I'll let you know if I sort it. Thanks for the suggestion :cyclops:
Click to expand...
Click to collapse
Why are you installing superuser? It is already installed with the universal root. That may be it too.
Edit: And some of the apps I put on there are old on purpose. Like Root Browser. I have it set so that the free version is ad free. If you update it, the ad free goes away.
Sent from my Nook HD+ running CM10.1 on emmc.
I am VERY sorry it's taken me so long to reply! Even though I've only just joined, I should have done it long before now.
I found the problem - it was 'Pimp my Android' app. I was experiencing something called 'boot loop' - so much for my research skills for such a common problem. I fiddled about with my usual settings - and found some that cause it to get stuck like that, even when they're set not to activate on startup!
Tis' all working now. Everything else seems to be just peachy! You were right, thanks for your help

Categories

Resources