I purchased the NC last week and it came with 1.0 software. I have rooted with the 1.0 software and everything is awesome.
I have been reading feverishly on here but am a little confused. Can someone point me to the steps to go from rooted 1.0 to rooted 1.1. I am looking forward to bringing nook to BN store and use the free in store reading for an hour.
I have been searching on here and just a little confused and how to get to this next rooted software.
Thanks,
Mike
EDIT: IGNORE! I see you want 1.1. Sorry, this can be deleted by mod. This is why they don't let new posters, post links.
you can flash 1.1 right over 1.0 apparently. It didn't work well for me. If I were you, I'd go to 1.0.1 first and then to to 1.1.
mjc8870 said:
I purchased the NC last week and it came with 1.0 software. I have rooted with the 1.0 software and everything is awesome.
I have been reading feverishly on here but am a little confused. Can someone point me to the steps to go from rooted 1.0 to rooted 1.1. I am looking forward to bringing nook to BN store and use the free in store reading for an hour.
I have been searching on here and just a little confused and how to get to this next rooted software.
Thanks,
Mike
Click to expand...
Click to collapse
From what I understand, you need to first update to 1.0.1. Then, auto-nooter. After that's done, you can apply Decadence's 1.1.0 pre-rooted update. You need to be on 1.0.1 to auto-nooter before you update to 1.1.0.
Hope that helps!
So it has to be a specific 1.1 right? I have a 1.0.1 rooted and tried to install the 1.1 from the B&N site, but nothing happened. My nook just restarted and deleted the zip file from the nook's root directory with no update taking place.
If you want 1.1 AND be rooted, then you'll need to start with a rooted NC that is on 1.0.1 or 1.0.0. Then flash 1.1 with the file provided in the thread below.
http://forum.xda-developers.com/showthread.php?t=932145
Rooting 1.1 nook color
I just got my Nookcolor (with 1.0.1) and was planning on rooting it, when a couple days ago I turned it on and it upgraded itself to 1.1. I just tried to use the instructions to root it using the SD card img (for 1.0.1), and no huge surprise that it did not seem to work.
I am assuming the procedure at this point (until someone comes out with a 1.1 .img) that I need to downgrade back to 1.0.1 before I have can root it.
Is this possible? Is there a procedure for it?
I also have seen very touchy typing on the virtual keyboard, and would like to use instructions I have seen to recal the touchscreen (but it requires root, of course). If I don't have a way to do this I might just return it to B&N.
I do like it a lot better than my eInk nook.
Tonkabot
Yes. You have to revert back to 1.0.1 first. Lots of threads that tell you how. I'm about to turn in for the night so don't feel like searching. But go to the development forum and find the 1.0.1 recovery and then use that to revert back. PM me if you need help.
Sent from my LogicPD Zoom2 using XDA App
Thanks to all. I will give this a try and report back.
Can I do this process with 2 gb micro sd
mjc8870 said:
Can I do this process with 2 gb micro sd
Click to expand...
Click to collapse
That is exactly what I did.
UPDATE: IIRC the pre-requisite is to be on 1.0.1.
Homer
1.0.1? I thought I could use this from rooted 1.0? If not, how do I get to 1.01?
mjc8870 said:
1.0.1? I thought I could use this from rooted 1.0? If not, how do I get to 1.01?
Click to expand...
Click to collapse
See this thread for a couple different approaches
Just looking to confirm I can go from 1.0 to 1.1 . I thought I have read some posts indicating that. If anyone has done this, please let me know if I am on right track.
Thanks,
Mike
I am sorta lost also, I have read a few threads and each one says a different thing. I have a stock 1.0.0, what would be the absolute easiest of doing this, also do I need to leave the SD card in the nook? (borrowed it from my Verizon fascinate)
To go from stock 1.0.0 to 1.1:
Download 1.0.0 to 1.0.1 patch http://images.barnesandnoble.com/presources/download/nookcolor/v1.0.1/Sideload_update.zip Source: http://nookdevs.com/NookColor_Rooting
To use patch, follow directions here: http://www.barnesandnoble.com/u/noo...igLink-_-k244266-_-j12871747k244266-_-Primary It says 1.1.0 but it's the exact same steps
You now have 1.0.1 no root.
Download Automooter 2.12.25 and follow directions here: http://forum.xda-developers.com/showthread.php?t=872490 THIS WILL DELETE EVERYTHING ON THE SD CARD
You now have 1.0.1 rooted NC.
To go from 1.0.1 to 1.1.0 go here: http://forum.xda-developers.com/showthread.php?t=932145
There may be better ways, do everything at your own risk, hopefully it won't cause a natural disaster, etc.
Note: I only have experience going from 1.0.1 to 1.1.0. But going from 1.0.0 to 1.0.1 seems trivial.
After you do all that download "ROM Manager" from the Market. Open it. First option is Flash ClockworkMod Recovery, click it if you don't have a current recovery (Can't remember if one of the above steps installs it...). ClockworkMod makes it easy to backup and restore your setup. Click on Backup Rom, it will reboot and backup the rom to the sd card. If you ever mess something up, you can recover that rom so you won't have to go through 1.0.0 to 1.1 again.
I tried updating to 1.01 per directions and nothing happened. I then tried to install zip through clockwork recovery and it started but said installation aborted.
I am having a tough time upgrading from 1.0 root to 1.01 root. I have followed directions and struggling. The update zip say's installation aborted when tried thorough rom manager sd card. Nothing happened when I transferred to nook drive via usb cable. I am at a complete loss now.
Are you sure the NC is 1.0.0? Look under Settings > Device Info > About Your NookColor
The file is exactly named as above? Not Sideload_update-1.zip? It's in the root (not in any subfolder) of the NC, not on the sd card?
Try rebooting, then poking around the menus to see if it updates. Reboot as in hold power button down till it says "Do you want to turn your device off?", hit yes, it's off, then turn back on.
Probably a dumb question, but I've looked and looked on the threads and haven't found the answer. I have an Auto-nootered NC 1.01. I have been avoiding the auto update to 1.1 like the plague (until the AN for 1.1 was ready ). Now that it's here, what do I need to do before running AN 3? Can I head to B&N and force the update to 1.1 - then run AN 3?
Do I have to fall back to 1.0, go to 1.01, then to 1.1, then AN3?
One other quickie - if I use Astro to back up all my glorious apps now, can I just save that micro SD and restore them from that after I reroot using AN3 and reinstall Astro? Thank you!!!
You need to look more carefully, then. There are tons of posts about this. You can us AN 3 if you are already on 1.1. so you can let your device update or you can update it manually. Then you can use AN 3. Shouldn't need to fall back to 1.0 or 1.0.1. Don't know about Astro. Don't use it.
I prefer using the clockwork/Rom download way of getting to rooted 1.1.0
It was very simple and I don't believe my device needed to reinstall anything.
Hi wonderful people of XDA!
I just got my Nook Color used on craigslist and now I'm just wondering what to do next. I did a lot of reading up on these forums (and the android development part of the forums) and found out that I could root it with autonooter 3.0 and monster rootpack.
However, is there a benefit of keeping the firmware at 1.0.1 (the way I got it) and rooting it VS updating it to 1.1.0 and rooting it?
What are the pros and cons if any? I see that 1.1 adds a bit of new features to the NC, but I also heard that Clockworkmod Recovery doesn't like 1.1, or something. I remember briefly reading that somewhere on these forums but it could have been old news, or outdated and recently fixed. Regardless, I'm just sort of confused.
And after rooting, what should I do? Is Froyo completely stable and smooth yet?
TIA!
The 1.0.1 version has more support right now but the 1.1.0 support will certainly improve over time. For now i would recommend running nookie froyo off of a bootable sd card and leaving your nook stock. Then if you want to take the next step, do an emmc flash of froyo and never look back...
With that said, the 1.1 version rooted with the scripts on it works really smoothly.
The best thing about the nook color is how easily it can be put back completely stock, so you don't have to worry much about messing it up.
Enjoy
Nice. Thanks for the quick reply!
So I'll update to the 1.1.0 firmware and root. Do you recommend autonooter or monster rootpack? And what scripts are you talking about?
TIA, once again, haha...
I think the autonooter is easier for your first mod. The monster rootpack is a great recovery tool and highly recommended to have on an extra sd card.
Get a few 2-4gb sd cards, class 4 is fine. Should be pretty cheap and easy to find. Then you can make a bunch of bootable cards to play with like honeycomb and froyo.
Alright cool,
autonooter it is. Will I still be able to get CWMRecovery? I still want to overclock and the only way I know how to flash is through cwmrecovery.
Sorry for all these questions!
I've read some folks are having issues getting stuck in CWM on 1.1 but don't remember why. Poke around in the devl threads and see.
Sent from my nootered Nook Color.
I hear the best is to:
run oobe.
turn off wifi
update to 1.0.1 if not already on it (NOT 1.1)
run autonooter 2.3.x
install CWM (or does autonooter do that?)
nandroid restore stock rooted 1.1
then you have working CWM and 1.1 if i am not mistaken? This is my plan, mine is in the box, waiting to open it on my bday!
bandroidx said:
I hear the best is to:
run oobe.
turn off wifi
update to 1.0.1 if not already on it (NOT 1.1)
run autonooter 2.3.x
install CWM (or does autonooter do that?)
nandroid restore stock rooted 1.1
then you have working CWM and 1.1 if i am not mistaken? This is my plan, mine is in the box, waiting to open it on my bday!
Click to expand...
Click to collapse
No, Autonooter does not install CWM. You need to download ROM Manager from Market and install CWM from within ROM Manager. Good luck and happy birthday!
I restored my NC after much fun with rooting etc. Seems totally stock now with the original B&N software. Trouble is, it went back to the 1.0 version and for some reason won't let me upgrade to 1.1.
I downloaded the 1.1 upgrade from the B&N site and placed it in the myNookcolor drive. Followed the instructions carefully, but not only does the NC ignore the update, but somehow erases the file.
I wonder if I have to be at 1.0.1 in order for the upgrade to work. Or am I missing something else.
Thanks.
I may have made a huge mistake.
I just purchased a Nook Color version 1.2, and successfully rooted it using ManualNooter 4.5.2. Everything was working pretty much, and I didn't think to check, but went into ROM Mananger, downloaded CM Mod 7.0.2 I believe, and installed it.
It rebooted, installed, and now is stuck at the boot screen (where the word color is rainbow flashing).
No backup (yeah I know...)
Where should I go from here?
Is there a way to flash the Stock 1.2 via CMW? I can get to that screen, but I need a way to install a .zip that will work...
For now I am going to flash to 1.0.1. I can just upgrade over wifi to 1.2 and then re-root, correct?
Figured it out. Flashed to 1.0.1, and then upgraded to 1.2. Now to re-root again haha. What a process!
If you just want to play with CM7, you don't need to root. You can install to SD without touching the 1.2 installation: http://forum.xda-developers.com/showthread.php?t=1000957
If you want a little simpler, step-by-step version of those instructions, google "anamardoll nook cm7."
The bootable SD you make can also flash CMW to your NC without rooting or otherwise disturbing the 1.2 install. Just make sure you get a suitable SD if you're planning to run CM7 off of it--this thread breaks down what to look for:
http://forum.xda-developers.com/showthread.php?t=1005633