First of all I would like to say hi to everybody, this is my first post on this awesome forum I found just today. I would also like to say that I bought my first smartphone a few days ago(HTC Wildfire of course) and when browsing on the internet trying to find out stuff I could do with the new found device I found a lot of people reffering to something called 'rooting' and 'flashing' and 'ROMs' and that doing this enables your phone to have a lot more new functions and stuff like that.
Therefore I have some questions to ask you nice people, so here they are:
- What is 'rooting', 'flashing' and what are 'ROMs' in the first place?
- I found a lot of abbrevations when people described 'rooting' their phones which I did not understand so I'm kindly asking if anyone could please explain the process clearly? (is this the correct process? -> forum.xda-developers.com/showpost.php?p=7895908&postcount=127 , if it is what is the OTA update?)
- If someone could please explain the process of 'flashing' to me?
- Are there any recommendable 'ROMs' I could try?
I truly thank anyone who would be able to explain this to me and take their precious time to do so. I'm sorry if my questions seem silly but I'm extremely new to the smartphone android thing and therefore I don't understand everything.
Thank you again for your replies, ciroman
- What is 'rooting', 'flashing' and what are 'ROMs' in the first place?
Rooting = gives you/apps on the phone acess to root acount in android wich gives you acess to do things wich you can not do normally. read more about root and superuser(su) here: http://en.wikipedia.org/wiki/Superuser
ROM = is sort of the operating system wich most often comes in zip files and is possible to flash to the phone with a custom recovery. this often include apps and modifications wich is made of the person who makes the ROM. also includes superuser acess (root) not allways but often.
custom recovery = a recovery mode wich allows you to do backup of your current settings and evrything else you have on the phone. also makes it possible to flash ROMs wich you have saved on the SD-card
Flashing = this is when the recovery takes your zip file and exctract it to your phone. when this is done you have a new "operating system" on the phone
- I found a lot of abbrevations when people described 'rooting' their phones which I did not understand so I'm kindly asking if anyone could please explain the process clearly? (is this the correct process? -> forum.xda-developers.com/showpost.php?p=7895908&postcount=127 , if it is what is the OTA update?)
Yes this looks like the process of rooting/installing a recovery.
OTA = Over The Air
- If someone could please explain the process of 'flashing' to me?
wont explain this.. it should be explained somewhere else..
- Are there any recommendable 'ROMs' I could try?
There are only a few ROMs out at the moment..
The only one I can recomend for you rigth now is wildpuzzle ROM by danne_jo there is more ROMs out but I dont know how stable theese are.
Click to expand...
Click to collapse
I dont garantue that this info is 100% correct and anyone who feels like please correct me if im wrong.
I also take no responsibility for any damage made to your phone by following any of the above information.
Thank you so much for your quick explanation. I must say though that searching for how to flash and root this phone was quite painful for a newcomer like me-took me hours to find the first part and then some to find the second.
I hope following these two guides will get me there
shinelt said:
Prep
Before beginning the process, I would recommend doing the following to your phone:
(1) If you have the original unrevoked root installed, uninstall it by using "Menu", "Settings", "Applications", "Manage Applications" and scrolling to "Unrevoked" at the bottom. Tap it, click "Force Stop" at the bottom and then "Uninstall", "OK" to uninstall it. Then power off/on your phone just to be sure.
(2) If you haven't already installed the OTA 1.47 update, do it now: "Menu", "Settings", "System Updates", and "HTC software update" at the bottom, then click "Check Now" to get the 1.47 update. If you do this update, it takes up to 10 minutes so be patient and let the phone reboot (a few times) until it is done. Then once the update is done, power off/on one last time to get a clean start.
(3) Set your phone to "Charge Only": "Menu", "Settings", "Connect to PC", tap "Default connection type" and select "Charge Only".
(4) Enable USB debugging: "Menu", "Settings", "Applications", "Development", and put a check in "USB debugging".
The root process
(1) Go to Control Panel on your system and uninstall any "HTC" software such as "HTC Sync".
(2) Download the unrevoked3 install package: Go to
unrevoked3 recovery reflash tool, v3.0 and click "Download for Windows". Save the "Reflash-bundle.exe" file somewhere that you can find it on your system.
(3) Using Explorer, run the "Reflash-bundle.exe" file you just downloaded. It'll ask where to install it. Don't just accept the default: change the install location to a folder you can remember: it's just going to unzip some files there: it isn't really a software installer.
(4) Once the files have unzipped, go to the folder you chose in the above step. You should find an "hboot driver.htm" file in that folder: double click on that to open the html instructions on how to install the drivers. Follow the instructions in the html file starting with downloading the actual driver files at the very top. When you download those driver files and unzip those, those are the files (the folder) you'll point to in subsequent steps in those instructions. When done with the html instructions, you should have drivers installed and shouldn't have to come back to this step.
(5) At this point, if you needed to install the drivers, you are probably still sitting at a boot menu on your phone. UNPLUG the phone from USB and select "Fastboot" and then "Reboot" to reboot the phone to restart it. Before the next step, your phone should be on and booted up in its normal operating state (not some boot menu).
(6) If you are running anti-virus software, turn it OFF or disable it now.
(7) Now go to the folder where you unzipped the reflash bundle (step 3 above). In XP or older systems, just double click the "Reflash.exe" file. On Vista and Win7 systems, I'd recommend right clicking on "Reflash.exe" and selecting "Run as Administrator". While this may not be necessary, I know that some USB drivers get really mad if you try to access the USB port without admin privileges (sorry, I'm a coder so I run into that stuff and warn you so you don't have to) so I did it as a precaution.
(8) You should get a window with "Unrevoked 3" on it (on the computer of course). Just follow the instructions in smaller font below "Unrevoked 3" to finish rooting. Note that when it says "Waiting for device", it wants you to plug your phone into the computer via the USB cable. Note that it wants the wildfire to be fully booted normally (not in the Hboot or recovery menus). The prompts at this point are very specific so no need to repeat them. If all works as it is supposed to, the only thing you really have to do is scroll to an item on the phone and select it when instructed. The rest is automated and should result in a "Done" message. The whole thing at this point took maybe one minute so it isn't something you have to wait for or stare at for a long time so if something gets "stuck" for a while... there's likely a problem.
(9) Don't forget to turn your anti-virus software back ON.
Now, when I followed these steps on my Win7 x64 system, reflash.exe detected the phone and started working (we're in step 8 here) but about 4 messages into the process I got the "communications lost... try again" message that unrevoked refers to on today's Twitter. Some say that (contrary to step 1) installing HTC sync actually solves the problem. I didn't try that. After about 6 tries on my Win7 system and even pulling some "tricks" to try to pause reflash.exe at certain points, I gave up and simply booted my old XP laptop and repeated the above steps and it worked perfectly the first time. At the point of the failure, you hear the two tone usb-device-disconnected sound followed by a use-device-connected sound about 20 seconds later. Somewhere in between is where the "communications lost" message appears so it looks like some sort of USB ack/nack issue. Hopefully it'll be resolved soon. My best advice if you get that error: try a new machine. The XP machine that worked perfectly for me had never seen any HTC software. Maybe that helped. And maybe after I uninstalled the HTC software on my Win7 x64 system (the one that didn't work) I should have rebooted before continuing: I didn't because it didn't prompt for a restart and I couldn't find anything "HTC" running in task manager.
do wipe data/factory reset
put all files to sd from puzzle rom. ( go to partitions menu > mount usb storage)
(put those 01 , 10 , 52 ,300 , 400)
go to nandroid> backup
go to install zip from sdcard
and install files from 01 to 400.
go back and press reboot system now.
Click to expand...
Click to collapse
fireplayer said:
I'm just as n00b as you on this. But I'll help you out...
1. After using unrevoked once - reboot your Wildfire.
2. Go to first page on this thread that you read right now.
3. Download the things you want to flash - all links are in the 1st post. - put them on your SD-Card - start with flashing 0001_WildPuzzleROM_v2.zip first - to do this - download that file and save it - anywhere on your SD-card (somewhere you'll remember where you put it). Download and save all you want from 1st post on this thread - to your SD-card...do NOT open the zip files - just copy them to the SD-card.
4. Turn off your Wildfire
5. Turn on your Wildfire while holding Volume Down button - you have to have your SD-card with all the files you want - inside your phone now.
6. This get's you to the boot screen. Wait for HBOOT to say no image...blabla..
7. Push Volume Down to get to option "Recovery" - press Power button.
8. Phone will Reboot to a white HTC screen - and from there go to ClockworkMod Recovery screen - if you did everything correct.
9. Press Volume Down several times - until you get to option "nandroid"
10. Press the round button at the bottom of your Wildfire - the one you use to take pictures when using Camera functions, let's call it the Camera button.
11. You see "Backup". Press Camera button, and wait until it's done backing up your system. Do NOT turn off your phone! Wait until it's done. It will say Backup complete!
12. Next if you want. But only if you want - you don't have to - you can Wipe / Factory Reset your phone, saves a lot of ROM space and Memory. Phone WILL be slightly faster if you choose to do this - but all your programs and settings will be gone - Your choice.
IF you do NOT want to Factory Reset your phone, skip steps 12 & 13.
IF you want to do this then push Volume Down until you get to option "wipe data/factory re" (probably reset, but only show until re on my phone) and then press the Camera button.
13. As to make sure you really want to do this, you need to confirm... push Volume Down until you reach option "Yes -- delete all u" - then press Camera button and wait.
14. Now you can start flashing. Push Volume Down until you reach option "install zip from sdcard" Press Camera button.
15. Push Volume Down until you reach option "choose zip from sdcard". Press Camera button.
16. Find where you put the files you downloaded from post 1 on this thread. Choose 0001_WildPuzzleROM_v2.zip. Press Camera Button.
17. Push Volume Down until you reach option "Yes - Install 0001_W". Press Camera button. Wait for it to be done.
18. Repeat steps 14-17 with the other files you want to flash. IF you want to Flash files that are 0900 or higher. Reboot and change Wallpapers before you do.
To reboot Press Power button to go back and Press Camera button on option "reboot system now". Then repeat steps 5-7. If you need help changing wallpapers too let me know and I'll try to explain that too.
When done flashing the files you want. Reboot. And you're done.
First reboot after flashing Wild Puzzle Rom takes a very long time. Be patient.
I hope this guide made sense. If there's anything unclear let me know and I'll be happy to clarify. Thanks and Good Luck!
*EDIT* Just saw that someone else made a guide too, well at least there are people wanting to help us n00bs. Thanks. and I think both guides should work. Hopefully you'll make some sense of them *ENDS EDIT*
Click to expand...
Click to collapse
Thanks again!
My kids received Nook Color readers for Christmas, and like everything, they look to Dad to optimize them.
I was going to try rooting, but a couple of things remain unclear:
- Do I have to 'auto-noot' to root the Noot, or are there other options (other tools, manual rooting, etc.)
- Should I upgrade the software to 1.0.1 prior to rooting or not?
I tried to give auto-noot for 1.0.0 a quick run, but I couldn't get the SD card to boot (and a check revealed that I had two FAT16 partitions, one with the appropriate images and the other with the files needed). I'm assuming it's because the card I have might be too slow (portal recommends Class 6 or greater, and the card I'm using is a cheapo card I got with an earlier phone that I'm not too sure of).
Thoughts? Tips?
I upgraded mine to 1.0.1 first then rooted.
What OS is on your PC?
If Windows, did you use Win32DiskImager to write the image to microSD card?
Take a look at here for different ways of rooting here http://www.nookdevs.com/Portal:NookColor#Rooting
The easiest and the way I rooted is below which I borrowed from http://blogkindle.com/2010/12/read-kindle-books-on-nook-color/
Here’s what you need to do:
1. Before rooting make sure that you’ve registered the device with B&N as it might not work after rooting.
2. Download nooter that corresponds to you Nook version. You can check your Nook version by pressing Nook button, selecting “Settings” >> “Device Info” >> “About your NOOKcolor” >> Software version:
--- for 1.0.0 – GabrialDestruir’s auto nooter 2.12.15 file 15 Dec 2010
--- for 1.0.1 – GabrialDestruir’s auto nooter 2.12.25 file 25 Dec 2010
3. Unpack the file
4. On Windows use Win32DiskImager to write the image to microSD card (please note that all data on the card will be lost). For Linux or Mac, check out NookDevs.com for detailed microSD imaging instructions.
5. Completely power off NOOKcolor by holding the power button until the screen blurs and “Power off NOOKColor” dialog appears. Select “Power Off” and wait for the device to shut down completely.
6. Turn device face down and open the microSD card container in the lower right corner. Push the card in with metal contacts facing down.
7. Connect the device to your computer via USB cable. The device will power up and book from the SD card but the screen will not turn on. This is normal.
8. After about a minute your computer show detect the new device. This means that the rooting is complete. Your Windows computer will complain about missing drivers. This is normal.
9. Disconnect the USB cable and remove the card from the reader.
10. Power cycle it by holding the power button for 20 seconds and then releasing it. The press the power button briefly to power the reader on.
11. As the reader boots you will see a red splash screen.
12. Once the reader boots, you will be prompted for you Gmail account (as usually with Android) and some initial settings. This will only happen once.
13. As you open the extras folder you will see that it now contains Android market icon and some extras (Youtube, Gmail, etc)
14. You can now start the market app and download other apps that you like. You will need to reboot the device for apps to appear on the extras page. The apps themselves can be used right away just as with usual Android apps.
I would look for the thread in the android development section for auto nook 1.01. Update the OS to 1.01, then do the nook-ing process. Its all laid out there in the opening post.
I would definitely root your nooks to get the most out of them.
I'm guessing he meant Auto-Nooter 2.12.25 (1.0.1 Only), which the thread can be found here
I was looking for a manual method because I didn't have my card reader at work yesterday, and I couldn't get the card I wrote in my Incredible to boot Auto-Noot in 1.0.0.
Oddly enough, after deciding to upgrade to 1.0.1 first, when I tried to root the second time it worked just fine. I did the second one after upgrading, also went without a hitch. Think it just makes sense to upgrade first, seeing as they're both exploitable.
giantcrazy said:
I was looking for a manual method because I didn't have my card reader at work yesterday, and I couldn't get the card I wrote in my Incredible to boot Auto-Noot in 1.0.0.
Oddly enough, after deciding to upgrade to 1.0.1 first, when I tried to root the second time it worked just fine. I did the second one after upgrading, also went without a hitch. Think it just makes sense to upgrade first, seeing as they're both exploitable.
Click to expand...
Click to collapse
How can you write an image from your Incredible? You need to use a computer to write the "image" not just the files to the sdcard, to make it bootable.
-CC
clockcycle said:
How can you write an image from your Incredible? You need to use a computer to write the "image" not just the files to the sdcard, to make it bootable.
-CC
Click to expand...
Click to collapse
I spent some time re-inventing the wheel before I realized someone had documented the method on XDA (my fault for being search lazy):
http://forum.xda-developers.com/showthread.php?t=889001
You use the Linux DD command to write the image to the SD card, which renders it with the correct partitions and files needed to complete root. I did it yesterday, and assumed that I had either too slow a card or it didn't work, until I upgraded to 1.0.1 first and it worked at first crack. Just take care to write the card with the correct device name, mmcblk1.
I used GParted on Linux to double-check after doing my fdisk, everything looked kosher to me and it worked flawlessly.
giantcrazy said:
I spent some time re-inventing the wheel before I realized someone had documented the method on XDA (my fault for being search lazy):
http://forum.xda-developers.com/showthread.php?t=889001
You use the Linux DD command to write the image to the SD card, which renders it with the correct partitions and files needed to complete root. I did it yesterday, and assumed that I had either too slow a card or it didn't work, until I upgraded to 1.0.1 first and it worked at first crack. Just take care to write the card with the correct device name, mmcblk1.
I used GParted on Linux to double-check after doing my fdisk, everything looked kosher to me and it worked flawlessly.
Click to expand...
Click to collapse
Ah, totally forgot about that.. Well glad you got it sorted.
-CC
I'm new to the Nook scene, but I've read the someone/leapinlear threads on rooting/putting google apps on the device.
Now that 2.0.5 is out, that seems to break the above.
One of my confusions is the talk of OOBE ( a new acronym for me to learn. )
Is it possible for me to open the Nook HD+ on xmas morning, and play with it without registering/updating?
Does the Nook force you to connect to wifi? What if I had no wifi?
If I can play with it without registering/updating, then use the current rooting methods later in the afternoon ... will that stop 2.0.5?
Do I need to read more?
curiousmike said:
I'm new to the Nook scene, but I've read the someone/leapinlear threads on rooting/putting google apps on the device.
Now that 2.0.5 is out, that seems to break the above.
One of my confusions is the talk of OOBE ( a new acronym for me to learn. )
Is it possible for me to open the Nook HD+ on xmas morning, and play with it without registering/updating?
Does the Nook force you to connect to wifi? What if I had no wifi?
If I can play with it without registering/updating, then use the current rooting methods later in the afternoon ... will that stop 2.0.5?
Do I need to read more?
Click to expand...
Click to collapse
You said you read my thread. Yes you can do the xmas thing by skipping OOBE ( look in my thread for how to do it). Which basically means skipping registration. And you don't have to turn on wifi so that it updates itself. But you do have to turn on wifi to register and you can do nothing with it without either registering or skipping OOBE. But it may be kind of not much fun without apps, books and wifi. I also just posted a new way to have an old version and still register. But you might want to wait to see if other users do ok with it.
Sent from my HD+ rooted stock using Tapatalk
leapinlar said:
Yes you can do the xmas thing by skipping OOBE ( look in my thread for how to do it).
Click to expand...
Click to collapse
Found it and read it. Great.
leapinlar said:
But it may be kind of not much fun without apps, books and wifi
Click to expand...
Click to collapse
Agreed.
But I also don't want to do the update and risk never being able to root it and get Google App Store on it; I have a large array of apps/games for my phone that I'm hoping will work on the HD+.
You can immediately boot straight to CM10 without registering if you'd like. That's exactly what I did, and it has worked flawlessly.
OOBE, known as Out-of-Box-Experience. Basically after registering, you get the experience you should. Skipping OOBE is basically not registering the product, and entering a development/test mode. OOBE is associated with not registering the device.
The Nook HD+ requires a WiFi connection to register the product, and what if the end-user doesn't have WiFi? I guess that's tough on them, they can't register. To be honest, I can't believe it either. To use the HD+ if you do not have WiFi, is to skip OOBE (which is the same procedure as the Nook Color's).
If you skip OOBE, then there is nothing to play with on the tablet; other than familiarising yourself with the interface. That's it. Not even the browser works; actually it has no apps at all. If you later root the tablet [and install GAPPs], whilst not registering the tablet, you will eventually get a lot more features; and pretty much use it like any other Android tablet. However, a lot of features will be disabled, such as the stock Android Browser (it will not load, as it will not be installed). A lot of other apps may then cause problems, due to the default browser not being present (i.e. BBC iPlayer). With the All in One root, developed by someone0, it will disable automatic OTA updates, so you will not update any further than your current factory version. However, some users (including myself) have been forced the update, so you cannot be certain that you will remain on the factory version (those prior to 2.0.5).
However, I would recommend you reconsider your options. If you want a better experience, I would recommend that you register the device (do NOT register now, please read the rest of my post). Important, remember the credentials you register the device with. If there are any future updates for the Nook, you will need to input the same e-mail address and password (unless password changed). If you create another B&N account at this stage, your Nook will constantly output an error; I contacted B&N today, and they couldn't solve it either. I found the solution, you have to remember the exact e-mail address you used to register. So, remember the e-mail address you use to register; and absolutely the password too, or the security question. Without them, you will not be able to register your device again.
Continuing on, I stated I would recommend you to register the device. However, before you do so, please make sure you have a minimum 4GB microSD card present (I used a SanDisk 4GB class 4). When you register your device, your Nook will check for updates. It will find 2.0.5 and update to it. Just so you know, someone0 and leapinlar have worked together to bring a "Universal Root" for the Nook HD+ and that universal root even roots version 2.0.5 (thank you someone0 and leapinlar; I'm currently using it). After registering your device, you will be introduced to your Nook interface. It's empty, even the apps are pretty much useless (except for Browser, only positive); you can't even spend more than 10 minutes on it, without enjoying what your doing. So I would recommend the root + GAPPs to unlock most of the "Android" features. To use the universal root, you'll need to boot into CWM (ClockWorkMod) via SD card (minimum of 4GB, anything less won't be detected/viable). Before registering and continuing with what I say, please make sure you are able to write onto your SD card using your computer. Although we are using CWM, we are NOT going to flash any ROMs (unless you want to of course, but the following "guide" below won't detail so).
First, you'll need to insert your SD card into your computer; where you're in a position where you can write on the card. (Files links/sources/information was sourced from http://forum.xda-developers.com/showthread.php?t=2062613)
Write the CWM .img (NookHD+bootable-CWM-6023-for-emmc-stock-4GB.zip) onto the SD Card using "Win32diskimager in Windows or use the dd command in Linux or OSX".
Download NookHD+Universal-Root.zip and place it within the SD Card. Also do this for the GAPPS + EXTRAS (including ManualOTA and Unknown Sources) .zip file, which you can download here (put together by leapinlar). DO NOT extract the .zip, just place them into the SD card.
At this point, make sure you have registered your Nook HD+, updated and installed version 2.0.5. Also make sure you have launched the stock ROM at least once (i.e. turned on the device into the Nook software/modified Android OS).
Now, turn off your device (hold the power button until a message is displayed on screen, and press shut down, or similar on screen). At the bottom of the Nook, on the left of the charging port, there is a cover protecting the SD card slot. Take it out (not all the way, it's attached to the body), and place in your SD card (with the CWM and universal root, as well optionally the GAPPS; although recommend installed on the SD card).
With the SD card in, turn your Nook on. After a few seconds, you should load into CWM. Select the option "install .zip from SD card" (use volume up/down to move across the list, "n" button below screen to select, and power button to move up one menu).
Firstly, install "NookHD+Universal-Root.zip". Wait for it to fully install, then install the GAPPS + Extras.
After the last step, reboot your device and take out the SD card before reboot. You should now load into your stock OS, whilst being rooted and and GAPPs installed on version 2.0.5. Success!
After the above guide, I would personally recommend Nova Launcher Prime; it unleashes the full experience of Android for me anyway. Haha, from now it's all yours.
That should be all from me, and the best of luck. I support you either way, whether you register or not. Merry Christmas too by the way.
HiddenG said:
OOBE, known as Out-of-Box-Experience.
That should be all from me, and the best of luck. I support you either way, whether you register or not. Merry Christmas too by the way.
Click to expand...
Click to collapse
Fantastic; I happen to have a 4GB card and I'm writing out the .img as I type.
Merry Christmas to you.
Yea, I probably taking a day off from xda forum tomorrow, so enjoy guys.
leapinlar deserves most of the credits since he is doing all the scripting and testing. All I did was giving him ideas(good and bad).
Ahh.. CuriousMike, from BARF, right?
Small world. Let me reemphasize that if you immediately throw in the CM10 install, you can totally skip the registration step. You essentially boot around it, and the next time the device boots without the CM10 SD card plugged in, if you so choose, it will be like opening it up fresh out of the box, with the nook asking you to register and so on.
If you *just* want a full android tablet, the CM10 SD is by far the way to go. Odds are your Xmas wrapped nook doesn't yet have 2.0.5 installed. You should be able to jump straight into CM10 and avoid the current mess of trying to preserve root, avoiding updates, working around the B & N interface and so on. It doesn't mean you can't do that at a later date, but right now CM10 seems to be a much better option than trying to deal with the B&N interface. Best part is that you can continually boot right off that SD card and never have to worry about dodging updates.
I'd recommend it above the current alternative of trying to root and apply fixes to have a usable tablet.
KestrelYI said:
Ahh.. CuriousMike, from BARF, right?
Small world. Let me reemphasize that if you immediately throw in the CM10 install, you can totally skip the registration step. You essentially boot around it, and the next time the device boots without the CM10 SD card plugged in, if you so choose, it will be like opening it up fresh out of the box, with the nook asking you to register and so on.
If you *just* want a full android tablet, the CM10 SD is by far the way to go. Odds are your Xmas wrapped nook doesn't yet have 2.0.5 installed. You should be able to jump straight into CM10 and avoid the current mess of trying to preserve root, avoiding updates, working around the B & N interface and so on. It doesn't mean you can't do that at a later date, but right now CM10 seems to be a much better option than trying to deal with the B&N interface. Best part is that you can continually boot right off that SD card and never have to worry about dodging updates.
I'd recommend it above the current alternative of trying to root and apply fixes to have a usable tablet.
Click to expand...
Click to collapse
I guess we can disagree on that. The way I see it, doing Skip OOBE and then root it would be more stable than CM10. A lot of things still not working yet on CM10. So, I decided to stick w/ stock for my personal use. Considering there is universal root for 2.0.5 now also, it's possible to be on 2.0.5 and still get root+gapps. I guess it could just end up being what do you need it for.
my nook is up
posting this from the nook, using firefox! surprising that chrome comes up as not-compatible.
i've got a few of my play store apps already installed... looking good.
i bought nova-launcher for 0.25$ during googles last big sale, so i'm using that. the experience is androidy-enough.
word-hero is also incompatible... that will push me to "cm10" when it's compatibler-er.
My Nook HD+ came out of the box with 2.0.2 and hasn't updated to 2.0.5 after a couple hours of use. Tried a couple times to do a manual update and says no updates available. ??
Will this work, on my registered device? I have it all setup and working on205, but want gapps too.
Thanks,
Steve
piperman7 said:
Will this work, on my registered device? I have it all setup and working on205, but want gapps too.
Thanks,
Steve
Click to expand...
Click to collapse
It worked for me, just as described.
That sounds good, I just picked up a 8gb class 10 to use.
Thanks again,
Steve
HiddenG said:
OOBE, known as Out-of-Box-Experience. Basically after registering, you get the experience you should. Skipping OOBE is basically not registering the product, and entering a development/test mode. OOBE is associated with not registering the device.
The Nook HD+ requires a WiFi connection to register the product, and what if the end-user doesn't have WiFi? I guess that's tough on them, they can't register. To be honest, I can't believe it either. To use the HD+ if you do not have WiFi, is to skip OOBE (which is the same procedure as the Nook Color's).
If you skip OOBE, then there is nothing to play with on the tablet; other than familiarising yourself with the interface. That's it. Not even the browser works; actually it has no apps at all. If you later root the tablet [and install GAPPs], whilst not registering the tablet, you will eventually get a lot more features; and pretty much use it like any other Android tablet. However, a lot of features will be disabled, such as the stock Android Browser (it will not load, as it will not be installed). A lot of other apps may then cause problems, due to the default browser not being present (i.e. BBC iPlayer). With the All in One root, developed by someone0, it will disable automatic OTA updates, so you will not update any further than your current factory version. However, some users (including myself) have been forced the update, so you cannot be certain that you will remain on the factory version (those prior to 2.0.5).
However, I would recommend you reconsider your options. If you want a better experience, I would recommend that you register the device (do NOT register now, please read the rest of my post). Important, remember the credentials you register the device with. If there are any future updates for the Nook, you will need to input the same e-mail address and password (unless password changed). If you create another B&N account at this stage, your Nook will constantly output an error; I contacted B&N today, and they couldn't solve it either. I found the solution, you have to remember the exact e-mail address you used to register. So, remember the e-mail address you use to register; and absolutely the password too, or the security question. Without them, you will not be able to register your device again.
Continuing on, I stated I would recommend you to register the device. However, before you do so, please make sure you have a minimum 4GB microSD card present (I used a SanDisk 4GB class 4). When you register your device, your Nook will check for updates. It will find 2.0.5 and update to it. Just so you know, someone0 and leapinlar have worked together to bring a "Universal Root" for the Nook HD+ and that universal root even roots version 2.0.5 (thank you someone0 and leapinlar; I'm currently using it). After registering your device, you will be introduced to your Nook interface. It's empty, even the apps are pretty much useless (except for Browser, only positive); you can't even spend more than 10 minutes on it, without enjoying what your doing. So I would recommend the root + GAPPs to unlock most of the "Android" features. To use the universal root, you'll need to boot into CWM (ClockWorkMod) via SD card (minimum of 4GB, anything less won't be detected/viable). Before registering and continuing with what I say, please make sure you are able to write onto your SD card using your computer. Although we are using CWM, we are NOT going to flash any ROMs (unless you want to of course, but the following "guide" below won't detail so).
First, you'll need to insert your SD card into your computer; where you're in a position where you can write on the card. (Files links/sources/information was sourced from http://forum.xda-developers.com/showthread.php?t=2062613)
Write the CWM .img (NookHD+bootable-CWM-6023-for-emmc-stock-4GB.zip) onto the SD Card using "Win32diskimager in Windows or use the dd command in Linux or OSX".
Download NookHD+Universal-Root.zip and place it within the SD Card. Also do this for the GAPPS + EXTRAS (including ManualOTA and Unknown Sources) .zip file, which you can download here (put together by leapinlar). DO NOT extract the .zip, just place them into the SD card.
At this point, make sure you have registered your Nook HD+, updated and installed version 2.0.5. Also make sure you have launched the stock ROM at least once (i.e. turned on the device into the Nook software/modified Android OS).
Now, turn off your device (hold the power button until a message is displayed on screen, and press shut down, or similar on screen). At the bottom of the Nook, on the left of the charging port, there is a cover protecting the SD card slot. Take it out (not all the way, it's attached to the body), and place in your SD card (with the CWM and universal root, as well optionally the GAPPS; although recommend installed on the SD card).
With the SD card in, turn your Nook on. After a few seconds, you should load into CWM. Select the option "install .zip from SD card" (use volume up/down to move across the list, "n" button below screen to select, and power button to move up one menu).
Firstly, install "NookHD+Universal-Root.zip". Wait for it to fully install, then install the GAPPS + Extras.
After the last step, reboot your device and take out the SD card before reboot. You should now load into your stock OS, whilst being rooted and and GAPPs installed on version 2.0.5. Success!
After the above guide, I would personally recommend Nova Launcher Prime; it unleashes the full experience of Android for me anyway. Haha, from now it's all yours.
That should be all from me, and the best of luck. I support you either way, whether you register or not. Merry Christmas too by the way.
Click to expand...
Click to collapse
Just got my Nook HD+ for Christmas, 1st Android device. I followed the above instructions to root it, after reboot it is just sitting at the first nook screen. It's been about 15 minutes or so, should I manually reboot the device or wait longer? Is it possible it just needs to be redone? The only odd thing I can across was after selecting reboot it said "ROM may flash stock recovery on reboot", should i have selected Yes/No, Should I backup the stock ROM?
Thanks for all the Help
curiousmike said:
posting this from the nook, using firefox! surprising that chrome comes up as not-compatible.
i've got a few of my play store apps already installed... looking good.
i bought nova-launcher for 0.25$ during googles last big sale, so i'm using that. the experience is androidy-enough.
word-hero is also incompatible... that will push me to "cm10" when it's compatibler-er.
Click to expand...
Click to collapse
Glad you got your tablet working with GAPPs! Hope it's all good; of course it's much better than sticking to B&N's book reader, haha. Indeed yes, I can't believe that a few apps in Google Play are not compatible either; although as suggested, sideloading them often work fine. :laugh:
mzjc said:
My Nook HD+ came out of the box with 2.0.2 and hasn't updated to 2.0.5 after a couple hours of use. Tried a couple times to do a manual update and says no updates available. ??
Click to expand...
Click to collapse
Did you skip the OOBE? The registration process of the device? If so, this problem could occur. If not, and you're registered then no problem either. If you're truly stuck on 2.0.2, that could be seen as a benefit; as your roots would never be broken, due to no future updates. If you'd like to root and place GAPPs on your tablet, I'd recommend you follow someone0's all-in-one guide. someone0's allinone will root your Nook HD+, install GAPPs, manual OTA and installation from Unknown Sources; provided your HD+ is on version 2.0.0 to 2.0.4, where you are eligible. This rooting method provides the exact same end-result as the 2.0.5 root, and is no different in performance or usability; they're exactly the same, just different installation process.
I've not tested it, but you may use the same rooting process as I've described on the last page; since the rooting method is universal. However, I have not tested it, other than on version 2.0.5. You'll also need a microSD card for this process, so I'd just recommend the adb-allinone method by someone0.
Best of luck.
ifdwolf2008 said:
Just got my Nook HD+ for Christmas, 1st Android device. I followed the above instructions to root it, after reboot it is just sitting at the first nook screen. It's been about 15 minutes or so, should I manually reboot the device or wait longer? Is it possible it just needs to be redone? The only odd thing I can across was after selecting reboot it said "ROM may flash stock recovery on reboot", should i have selected Yes/No, Should I backup the stock ROM?
Thanks for all the Help
Click to expand...
Click to collapse
First Android device? Haha, hopefully it'll make a good impression after rooting and GAPPS. Sorry about the wait. Once you've loaded/rebooted into the Nook HD+ after CWM/rooting/GAPPS etc, press the "n" button below the screen. You should be given the option to select a launcher; temporarily select ZeamLauncher and set it as default action. After that, you should be good to go. Personally, I would recommend Nova Launcher Prime instead of ZeamLauncher. If you'd like, you can download the free version of Nova Launcher from Google Play (I would recommend it strongly over ZeamLauncher). It should provide you a better "Android-experience".
If pressing the 'n' button below the screen did nothing, then you can try the rooting process again. Also selecting yes, or no shouldn't make a difference during reboot; "ROM may flash stock recovery on reboot". You may backup your stock ROM if you feel necessary, but it's not absolutely essential (if you ever run into problems, you can force the tablet to fail booting 8 times, and the tablet will automatically restore to factory defaults). If you have further problems, please reply.
Best of luck.
Boom, thanks for the help, working like a champ now! Does the mic feature in nova require chrome? Gonna side load it now. Device is much better rooted, big thanks all to all envolved!
Sent from my BNTV600 using xda app-developers app
Hey folks. I'm having some issues with the "Root your device with a bootable microSD card" method. I followed the instructions precisely.. wrote the image to a 32 GB microSD (I don't own any 4 GB cards).. and my nook REFUSES to even see the card nor boot from it for that matter.. just goes straight to the registration screen every time. Is there something that I could perhaps be missing here...? or is it that I MUST have a 4 GB card (and no bigger)?? (the microSD is the cream of the crop Sandisk 32 GB class 10 model. I couldn't resist picking one up, as they were on sale for only $26 at the time.
My HD+ is a pretty paperweight at the moment, and I'd love to get it back up and running. I really don't want to do the "all in one" method, as it keeps you in "TEST" mode.. which bugs the crap outta me.
What am I missing?!
HiddenG said:
OOBE, known as Out-of-Box-Experience. Basically after registering, you get the experience you should. Skipping OOBE is basically not registering the product, and entering a development/test mode. OOBE is associated with not registering the device.
The Nook HD+ requires a WiFi connection to register the product, and what if the end-user doesn't have WiFi? I guess that's tough on them, they can't register. To be honest, I can't believe it either. To use the HD+ if you do not have WiFi, is to skip OOBE (which is the same procedure as the Nook Color's).
If you skip OOBE, then there is nothing to play with on the tablet; other than familiarising yourself with the interface. That's it. Not even the browser works; actually it has no apps at all. If you later root the tablet [and install GAPPs], whilst not registering the tablet, you will eventually get a lot more features; and pretty much use it like any other Android tablet. However, a lot of features will be disabled, such as the stock Android Browser (it will not load, as it will not be installed). A lot of other apps may then cause problems, due to the default browser not being present (i.e. BBC iPlayer). With the All in One root, developed by someone0, it will disable automatic OTA updates, so you will not update any further than your current factory version. However, some users (including myself) have been forced the update, so you cannot be certain that you will remain on the factory version (those prior to 2.0.5).
However, I would recommend you reconsider your options. If you want a better experience, I would recommend that you register the device (do NOT register now, please read the rest of my post). Important, remember the credentials you register the device with. If there are any future updates for the Nook, you will need to input the same e-mail address and password (unless password changed). If you create another B&N account at this stage, your Nook will constantly output an error; I contacted B&N today, and they couldn't solve it either. I found the solution, you have to remember the exact e-mail address you used to register. So, remember the e-mail address you use to register; and absolutely the password too, or the security question. Without them, you will not be able to register your device again.
Continuing on, I stated I would recommend you to register the device. However, before you do so, please make sure you have a minimum 4GB microSD card present (I used a SanDisk 4GB class 4). When you register your device, your Nook will check for updates. It will find 2.0.5 and update to it. Just so you know, someone0 and leapinlar have worked together to bring a "Universal Root" for the Nook HD+ and that universal root even roots version 2.0.5 (thank you someone0 and leapinlar; I'm currently using it). After registering your device, you will be introduced to your Nook interface. It's empty, even the apps are pretty much useless (except for Browser, only positive); you can't even spend more than 10 minutes on it, without enjoying what your doing. So I would recommend the root + GAPPs to unlock most of the "Android" features. To use the universal root, you'll need to boot into CWM (ClockWorkMod) via SD card (minimum of 4GB, anything less won't be detected/viable). Before registering and continuing with what I say, please make sure you are able to write onto your SD card using your computer. Although we are using CWM, we are NOT going to flash any ROMs (unless you want to of course, but the following "guide" below won't detail so).
First, you'll need to insert your SD card into your computer; where you're in a position where you can write on the card. (Files links/sources/information was sourced from http://forum.xda-developers.com/showthread.php?t=2062613)
Write the CWM .img (NookHD+bootable-CWM-6023-for-emmc-stock-4GB.zip) onto the SD Card using "Win32diskimager in Windows or use the dd command in Linux or OSX".
Download NookHD+Universal-Root.zip and place it within the SD Card. Also do this for the GAPPS + EXTRAS (including ManualOTA and Unknown Sources) .zip file, which you can download here (put together by leapinlar). DO NOT extract the .zip, just place them into the SD card.
At this point, make sure you have registered your Nook HD+, updated and installed version 2.0.5. Also make sure you have launched the stock ROM at least once (i.e. turned on the device into the Nook software/modified Android OS).
Now, turn off your device (hold the power button until a message is displayed on screen, and press shut down, or similar on screen). At the bottom of the Nook, on the left of the charging port, there is a cover protecting the SD card slot. Take it out (not all the way, it's attached to the body), and place in your SD card (with the CWM and universal root, as well optionally the GAPPS; although recommend installed on the SD card).
With the SD card in, turn your Nook on. After a few seconds, you should load into CWM. Select the option "install .zip from SD card" (use volume up/down to move across the list, "n" button below screen to select, and power button to move up one menu).
Firstly, install "NookHD+Universal-Root.zip". Wait for it to fully install, then install the GAPPS + Extras.
After the last step, reboot your device and take out the SD card before reboot. You should now load into your stock OS, whilst being rooted and and GAPPs installed on version 2.0.5. Success!
After the above guide, I would personally recommend Nova Launcher Prime; it unleashes the full experience of Android for me anyway. Haha, from now it's all yours.
That should be all from me, and the best of luck. I support you either way, whether you register or not. Merry Christmas too by the way.
Click to expand...
Click to collapse
Hey there. I followed your directions EXACTLY as posted. I didn't have a 4 GB microSD, but I DID have a 32 GB class 4. I used that. Long story short, the nook will NOT "see" nor boot from said microSD no matter what I do. Is there some sort of button combo I need to be doing while the nook HD+ is turning on to see the sd card? I'm totally lost on this.
Thanks in advance for your help!!
If you'd like to PM me, that way my email will notify me when a response has been received, I'd REALLY appreciate it! Thanks for all your hard work!
The one difference might be that I did the whole oobe; I registered the nook... I rebooted twice to the stock Os (somewhere I read that you had to reboot once after setting up bn account.) I don't know if that's your issue, but it's what I did and I'm running gapps.
Sent from my SPH-L710 using Tapatalk 2
HTC Incredible S Rooting Guide
What we will do?
1. Install HTC Sync
2. Downgrade the HBOOT to 1.13
3. Create a GoldCard
4. Run the RUU update
5. S-OFF through Revolutionary
6. Gain root access using SuperUser
7. Install custom rom (Lacoste Mod V5)
What we need?
1. HTC Incredible S
2. MicroSD card (2GB, 4GB, 8GB)
3. USB Cable
4. Windows PC (XP, 7, 8)
5. HTC Sync
6. Downgrade
7. Goldcard
8. RUU
9. Revolutionary w/ BETA Key
10. SuperUser
11. Custom Rom (Lacoste Mod V5 is the best and has the least bug from all the custom rom I have tried, it has a
working camera, video playback, youtube, fast performance, latest 3.0 kernel, volume wake,
included Sweep2Wake to use the capacitive buttons to wake the phone.)
Notes:
1. BACKUP any data on your phone that is very important
2. It's best to factory reset your phone and format your SD card to ensure 99.9% success.
3. Don't attempt to run any registry cleaner like CCleaner or ACS until we finished rooting your phone, OK?
4. This method worked flawlessly on my HTC Incredible S GB-2.3.5 Sense-3.0 HBOOT-2.00.0000, if your phone is
Gingerbread (not Froyo or ICS), Sense 3.0 and below, HBOOT 2.0 and above, then it should work... As I have
said, all HTC Incredible S that have upgraded to Ice Cream Sandwich must DOWNGRADE it first to Gingerbread
before continuing to this tutorial... Look on threads on XDA on how to downgrade your ICS phone.
Let's Start...
1. Make sure you have Admin account on your Windows PC or else we can't proceed. It is also advisable to use a
fully charged laptop (not a slow netbook or tablet) connected through a charger so if the power supply fails
while we're in the rooting process, your phone will not be bricked... And also use a fast performance PC or
laptop to avoid hanging ar freezing computer.
2. Install the HTC Sync included, Restart PC, Uninstall the "HTC Sync" ONLY on control panel and leave all other
drivers, and please don't attempt to run any registry cleaner like CCleaner or ACS unless we finished rooting
your phone, OK?
3. Place the folder "HTC Incredible S Rooting Guide" on Desktop for easy access.
4. Open this folder, open "2 - Downgrade" folder, click "runme.cmd"
5. Now it will ask question based on your phone
a. Do you have UNLOCKED ICS?
n - if you are not running the OFFICIAL ICS rom from HTC and has the stock gingerbread rom (2.3.5)
b. Do you have root?
n - if your device is stock and never been rooted before
c. Do you want to create goldcard?
y - best choice to avoid CUSTOM ID ERROR while running RUU
d. Do you unlocked on HTCDev?
y - IF THE MAIN-VERSION 2-3 steps above tells 2.00.000 (look on the output texts above the question!)
n - IF IT DOES NOT STATE 2.00.000 or if you have an unlocked bootloader from HTCDev.
6. You may receive this error during the script operation "rm failed for /data/data/recovery/log, No such file or directory"
This error can be disregarded. NOTE: If your device shows HTC with red triangle!, press VOL+,VOL-,POWER at the same time
and choose reboot, then run the runme.cmd again...
7. Read the script and make sure there is no error, if it has, close the cmd and click "runme.cmd" again...
8. NOTE: if the script write to many "The file specified was not found," disconnect the phone and connect it
again and click "runme.cmd" again...until you succeed. If it still shows "The file specified was not found"
disconnect, restart pc and phone, and follow again the procedure.
9. If all run successfully without error, proceed with the RUU.
10. This stage is very CRITICAL, if the RUU update proceeds, do not attempt to remove the usb of turn off the PC
or else you will brick your device.
11. Click "RUU_Vivo_Gingerbread_S_HTC_WWE_2.30.405.1_Radio_20.2808.30.085AU_3805.06.03.03_M_release_199308_signed.exe"
12. Next, Next, Next...
13. If it shows CUSTOM ID ERROR, you need to create a goldcard because the downgrade kit might not succeded in
creating goldcard in step 5. Search threads on xda on how to
14. If it seems to proceed without error, do not attempt to remove the usb of turn off the PC
or else you will brick your device. Close any open application on your PC to ensure it won't hang...
15. The RUU will run less than 10 minutes, if it's 20 minutes or so, there might be a problem (slow pc, faulty usb cord, etc)
16. When its finished running, you can verify if you have 1.13.0000 hboot by entering hboot (power on phone + vol down).
17. Then you can run revolutionary to get your s-off. FIRST, press windows + R, type cmd. Open the "Revolutionay folder"
click the address bar and copy. NEXT, on the cmd, type "cd(space here) then right-click paste. NEXT, type revolutionary.exe ENTER NOW!!!
input the beta key and wait...Download recovery? y- if you have internet...
18. Power OFF, press power + vol down, and see if it says
****Revolutionary****
S-OFF
6.13
19. Reboot, connect your device through mass storage. Copy the files "Superuser-3.0.7-efghi-signed",
"Lacoste_ModV5Incredible S_03.05", and "gapps-jb-20121212-signed" on the root of your SD card (not on any folder, just on the card itself)
20. Power OFF, press power + vol down, now go into RECOVERY, Install zip on SD card and choose "Superuser-3.0.7-efghi-signed". Wait. Choose Reboot Now...
21. Power OFF, press power + vol down, now go into RECOVERY, Install zip on SD card and choose "Lacoste_ModV5Incredible S_03.05". Wait. Choose Reboot Now...
22. Now it will load for less than 5 minutes, it it stays into a bootloop for more than 10 minutes, power it off by pressing the power button for 10 seconds or
remove the battery. Press power + vol down, now go into RECOVERY, Install zip on SD card and choose "Lacoste_ModV5Incredible S_03.05". Wait. Choose Reboot Now...
It should work now...
23. After it successfully booted into the homescreen, reboot the phone twice to ensure that the Home button will still work before flashing the Google Apps because it is a bug.
Google Apps will install some Google applications like a working Play Store and Google Now (like Siri on iPhone).
24. Power OFF, press power + vol down, now go into RECOVERY, Install zip on SD card and choose "gapps-jb-20121212-signed". Wait. Choose Reboot Now...
25. Now, everything should work fine. You are now using a Jelly Bean rom and can install limited apps to Gingerbread before like Google Chrome, Google Keep,etc.
It is advisable to download these apps available only on rooted phones
Cerberus - the best anti-theft app
Game Killer - cheating games
Lucky Patcher - removing license verification and Google adds on applications.
Root Explorer - remove the old chinese app using titanium backup and replace with the official RE app.
SetCPU - overclock your phone up to 1.2 Ghz-1.3 Ghz only to avoid overheating and battery drain.
Startup Manager - remove uneccesary startup, enable all system apps to ensure a working phone.
Sweep2Wake - included, use the capacitive buttons to wake the phone.
Titanium Backup - Freeze bloatwares, uninstall system apps.
CONGRATS!!!
Now you have a rooted device, I hope you enjoy my tutorial and don't hesitate to donate to my
account because I have spend so much time writing this tutorial and I would really appreciate it.
You can email me at [email protected] so I can give you my PayPal account or answer some of
your questions...
Nickson T. Delos Reyes
Bulacan, Philippines
UPDATE: I will post some of the links of all the downloads, just wait because our internet here in the Philippines is just 512KBPS...