Related
Hey guys, hope someone can help me
Actually I have Android on my PPC, I think that was Froyo version, but I would like to change flash an edited KAISimg.nbh. When copy it to my main folder of sd card pressing power + camera -> reset nothing happens, my android just normally boots up.
If any of suggestions about that will not work, another question is how to boot windows mobile instead android. Following guide I changed RUU_Signed.nbh with WP7 to KAISimg.nbh, I've put it on sd card, agian power + camera -> reset, and android just normally boots up.
Any ideas how I can solve that?
Thanks, emriv
emriv said:
Hey guys, hope someone can help me
Actually I have Android on my PPC, I think that was Froyo version, but I would like to change flash an edited KAISimg.nbh. When copy it to my main folder of sd card pressing power + camera -> reset nothing happens, my android just normally boots up.
If any of suggestions about that will not work, another question is how to boot windows mobile instead android. Following guide I changed RUU_Signed.nbh with WP7 to KAISimg.nbh, I've put it on sd card, agian power + camera -> reset, and android just normally boots up.
Any ideas how I can solve that?
Thanks, emriv
Click to expand...
Click to collapse
Remove sd card?. Remember that android runs over WM through sd card.
I tried that, Android just normally loads up. Asks for SD card, but after few seconds it keeps booting up. I think It's just because I've installed it on NAND.
Cannot install on SD card because I get error like 'can't umount /data'
emriv said:
I tried that, Android just normally loads up. Asks for SD card, but after few seconds it keeps booting up. I think It's just because I've installed it on NAND.
Cannot install on SD card because I get error like 'can't umount /data'
Click to expand...
Click to collapse
Flash your stock rom then, via sd card or usb . Remember to format FAT32 your sd card first, if you do it from there.
That is the message I get when I try to mount an SD card in my Gtab. When I power up, I get about a half dozen force closes, including Clockwork and Titanium. It lets me unmount the card, but when I try to mount it it sticks on the "unmount in progress. None of the apps that I installed or that came w/ the rom show up when I look at the SD card on my pc or at the internal one through a file manager. Almost everything FCs or crashes. Someone please help !!!
Thanks
BTW- I am using the latest version of Vegan and have been since it's release w/ no problems
Hi!
I have a problem a Nook of a friend which is stuck on Read Forever screen
I had install the rom of CM on it. and after I went to rom manager to make an update of the recovery i tried to reboot the device.
after of that the nook is stuck in this screen,
I tried to make a bootable SD recovery card but it does not boot from the SD either.
Any solution.
Is CM7 installed on the card or the internal memory?
sorry guys I had made a bad copy of my sd card recovey.
everything is ok now.
please Mods delete my thread if possible!
Thanks in advance!
merry x-mas guys
Got a problem,
Step-son got a nook color from his grams, intended to put CM7 on it so he has some halfway decent tablet, so he can play his flash games on it.
- after setup of the Nook color, it downloaded version 1.4.1 of it's own B&N OS
- did the uNooter from an 8 GB SD card (according to these instructions http://wiki.cyanogen...ll_Update_Guide), worked almost like a charm, at reboot i got a popup reading "default action: Home OR [that special menu-loader from the uNooter on the SD card]. after tapping the special menu-loader i was able to go into ROM MANAGER, did FLASH CLOCKWORK MOD RECOVERY, 5 minutes later gave SUPER USER/ROOT permissions, reboot, worked fine.
- tried to put the CM 7.1 on said 8 GB SD card, noticing that the uNooter image only has a ~70 MB partition and the rest of the 8GB is unused, so the 100MB "update.zip" doesn't fit (obviously).
- DOWNLOADING Roms via ROM MANGER directly is obviously a no-go, because it has no premium license, and loading it from the 8GB SD-card isnt working because the partition was only ~70 MB small.
- ASSUMING that the uNooter is NEEDED EVERYTIME to get into that special menu-loader for the Color Nook, I selected in ROM MANGER the option PARTITION SD CARD, thinking it will lead me into a menu where i can make another partition, beside the uNooters, to dump the CM 7.1 update.zip to flash the Nook Color's Rom with CM 7.1
- next thing I know, it reboots, and its stuck at the "Read Forever"-boot screen.
I PRESUME that ROM MANAGER's "partition SD card" screwed with the internal/virtual 'SD-card partition' and not my actual microSD chip loaded into the Nook Color's microSD-slot.
Is there a way to restore the device and/or load CM 7.1 on it, and if so, how; or am i ****ed ?
cheers
@
PS: is there a way to force-reboot the Nook Color? like as it's on phones often the case, by force-crashing it by holding down a combo of keys ? if so, which ones?
Atlana, same question answered here, as well as over on CM forum.
forum.xda-developers.com/showthread.php?p=20677328#post20677328
Hold power button for 20 seconds or so to force power off. Do it twice until you see it start to boot.
I have done everything as told but ADB will not run. I dont know what to do. I jsut want to get Android Market on my Nook with Adroid 3.0 so I can them download stuff. Is ther an easier way than this ADB stuff?!?
I have gotten this far but now I'm lost... I keep trying to install nookcolor-easyADB but it keeps saying "cant find install.vbs" and fails...
Touch-ee said:
. I jsut want to get Android Market on my Nook with Adroid 3.0 so I can them download stuff.
Click to expand...
Click to collapse
Android 3.0? Are you talking about Honeycomb? In most cases you don't need ADB to get the Android Market on to your Nook. You should be able to flash it using the Clockwork Recovery.
What version of Android do you have installed? Where to you have it installed to? Exactly what is your end goal?
I have android 3.0 Honeycomb installed on a 32GB Micro-SD. It works fine. My end goal is to just use the nook as much like I do my phone as possible. So i want to download Gmail, Kindle, Facebook, Google+, Music, etc.
I do have a 2 gig clockwork recovery SD already setup and did a backup of the Nook before I started. How can I use it to get Google Market and Amazon Market installed?
Using Honeycomb on the Nook isn't recommended, it is far from completely functional and there is no on going development on it, the devs are waiting for Ice Cream Sandwich.
I recommend using CM7, the nightlies seem to be the most functional and stable and are actively developed and supported.
That said if you are intent on using it anyway I would recommend going with the latest effort by Divine_madcat, from what I understand it is the most up to date and functional of the ports, here, it installs on the internal memory and comes preinstalled with the Market.
joenathane said:
Using Honeycomb on the Nook isn't recommended, it is far from completely functional and there is no on going development on it, the devs are wait for Ice Cream Sandwich.
That said if you are intent on using it anyway I would recommend going with the latest effort by Divine_madcat, from what I understand it is the most up to date and functional of the ports, here ,it installs on the internal memory and comes preinstalled with the Market.
Click to expand...
Click to collapse
I would be happy to just use Android 2.2 like what is on my Thunderbolt. Can you point me to a guid that would walk me through how to get it installed as easily as possible?
The reason I went with Honycome was that it was so easy, I just wrote the image to the 32GB SD and turned it on.
I would like to install to the internal mem but the first one i tried using my 2GB Clockwork SD didnt work...
Oh and my Nook is V1.2.
Burn the CWR image here to your SD card, once you've done that you can grab the latest nightly here , throw it on your SD card and flash it by booting up the Nook with the SD card inserted and choosing "install zip from sd card". Remove the SD card from your Nook and boot it up, then open the Rom Manager app and go to "download rom" then download and flash gapps. once you've done that you'll be all up and running, you can then use a program like mini tool to repartition your SD card.
Touch-ee said:
Oh and my Nook is V1.2.
Click to expand...
Click to collapse
Clean format ur SD card.
Download this.
Unpack it.
Write it to the SD card.
Download the latest stable release or nightly build of CM.
Put the downloaded ROM to the "boot" partition of ur SD card.
Boot the NC.
Let it install and reboot.
Connect wifi on successful boot and turn off the NC.
Download Gapps here.
Reboot it to the recovery by pressing "N + power" keys at the startup
It will install Gapps and reboot thats it.
Hit thanks if it helps
Ok that worked great!! Thank you!
But I dont understand what "Flash Gapps" is and I dont see it... I have a 2nd SD card so I dont care about repartitioning the one I used to get the image on...
It wont let me mount the SD card that has the GAPS on it. And it keeps saying "only premium user can mount..." etc.
So I reboot and install GAPS the same way I did the image??
I'm confused again
Touch-ee said:
It wont let me mount the SD card that has the GAPS on it. And it keeps saying "only premium user can mount..." etc.
So I reboot and install GAPS the same way I did the image??
I'm confused again
Click to expand...
Click to collapse
Copy ur Gapps to the "boot" partition of ur SD card having CM7 and power it on holding the "power and N" keys together till it says "loading recovery" it will install the same way like it installed CM7 ROM.
Thats all.
If this doesn't work let the CM7 power on and hold power off and check the option "Reboot into recovery".
Hit thanks and raise my thanks meter.
So I got GAPPS installed but now it’s just riddled with errors. Every time it tries to download something from the market it says it was "stopped unexpectedly"... I cant even get Gmail to install.
wht did u download? the latest nightly build or the stable release?
I turned on Dbug.... now I think its working!!
Sweet!! Thanks guys!
Touch-ee said:
So I got GAPPS installed but now it’s just riddled with errors. Every time it tries to download something from the market it says it was "stopped unexpectedly"... I cant even get Gmail to install.
Click to expand...
Click to collapse
Reboot in to recovery and run fix permissions and then try again.
siddhantfriends said:
wht did u download? the latest nightly build or the stable release?
Click to expand...
Click to collapse
Latest nightly
Touch-ee said:
I turned on Dbug.... now I think its working!!
Sweet!! Thanks guys!
Click to expand...
Click to collapse
Good glad you've made it.
Spoke too soon. Its all F'ed up. Thing is error city and I cant download anything from the market.
"This process android.process.media has stopped unexpectedly. Please try again. "Force Close""
That error comes up as soon as it gets passed the cyanogen screen and then comes up when you try to do almost anything...
I have a really strange problem that started all of a sudden today.
When I used UMS to transfer stuff into my 8GB Sandisk micro SD everything was fine but when I unmounted and tried to access the card using the Documents file manager that comes in AOSP the app kept crashing. "Unfortunately, Documents has stopped working"
I tried all kinds of things like formatting the card with exFAT but it is still persisting. Sometimes the SD card wouldnt mount.
I tried the "Scan Fix" that comes when you plug it in a windows 7 pc but now even that option won't show up as sometimes the card just doesnt get mounted. Sometimes it did but sometimes it didnt
So i thought maybe that was the end of my card's life so I tried another SD card (1 GB) but the same thing is happening. It is mounting fine with UMS and i can copy stuff into / from it but the Documents app is still crashing. Have tested the same with two different ROMs and it crashes on both
I don't understand what the problem is. Surely both cards havent gone bad because the 2nd one works with another phone I have. I will have to check the 8GB one as well.
Anyhow, would anyone have any idea what is going wrong or what might be a possible solution for this?
Help :crying:
Quick update.
I flashed back stock and the card seems to be working (both of them)
What the hell?
What could have happened?
Update. Its somehow fixed after I have installed stock and re-rooted and flashed custom ROM :good:
EDIT: THE PROBLEM SEEMS TO BE BACK WTF?
EDIT: Documents is crashing but ES file manager works