I've rooted my phone and used many Cyanogen roms.. but ever since the last one (4.1.11.1) I can not read my SD card when I mount it to my PC. It says it needs formatting when it really doesn't as I'm using the phone as normal, saving pics.. backups etc.
Can anyone help me with this as there is no way I can get Cyanogen's latest mod without access to my SD Card.
Thanks!
Have you tried to access it in Ubuntu?
Also can you mount it in adb and push an update to the card?
I haven't tried either of those but I will and get back to you..
Thanks!
amandora said:
I haven't tried either of those but I will and get back to you..
Thanks!
Click to expand...
Click to collapse
No problem. Let us know how it goes.
no luck so far with linux. what's the procedure for connecting via adb? i have the sdk installed with eclipse.
got it to boot up in ubuntu.. is this a known problem?
I have had my g1 for about a year now and I rooted it a few months ago. I've been trying to update the rom but everytime I try to format the sd card on my pc it says no disk found in drive F. I have tried it on other computers. I tried it via usb and a card reader. When I put update.zip into the root folder it says it cant find it. Please someone help! I need my phone to be amazing again!
Is the card formatted in Fat32?
Yeah its formatted to Fat32
you have to assign the a sd card a drive letter.
assign the sd card a drive letter.
How do I do this?
Well I just assigned it a letter and the same thing happens. I really am stuck.
What are you trying to update from? What update are you trying to apply? What recovery are you using? Do you have a file manager on your phone like androzip? If you can answer some questions, you may have a few workarounds....
xxwigglesxx said:
I have had my g1 for about a year now and I rooted it a few months ago. I've been trying to update the rom but everytime I try to format the sd card on my pc it says no disk found in drive F. I have tried it on other computers. I tried it via usb and a card reader. When I put update.zip into the root folder it says it cant find it. Please someone help! I need my phone to be amazing again!
Click to expand...
Click to collapse
You could try doin it with your phone (since you said you're rooted) using recovery
If you're using Cyanogen's recovery there's a good guide on androidandme.com
http://bit.ly/61CXFo
If you're using Amon_Ra's recovery I think it's automated, I've never used it before but from what I understand the you have the option to do it from the recovery menu
I'm currently running cyanogen mod 4.1.11.1 I'm not sure of the recovery image and I am trying to update to the next version of cyanogen. I think it might be a problem with my phone :S I really dont know. I have looked online and nothing seems to work I can put any update onto the sd card but when I try to update on my phone it says the file doesnt exist
it should say what recovery you are using in the recovery screen.
connect to wifi spot, download the new amon ra recovery, and move it from the download folder to the root of the sdcard using androzip (from the market).
follow the steps to flash the new recovery in the amon thread.
the next steps from there are up to you.....you can try to repartion your card using the menu option in recovery and then try to mount your g1 to your computer in the recovery menu. the recovery will allow you to choose what size partitions you want (fat32, ext, and swap) and do all of it for you. very handy.
once you get it to mount to your computer, you're in business.
if you think your card is ok as is, you could always download the htc file and cm4.2.6 directly to your g1, move them from download folder to sd root, wipe everything and flash.
either way, if you run into problems with your card, you maybe without phone until you get a good card.
good luck
Hey thanks for the great replies. Still no luck though I downloaded the amon ra recovery image and did what it said but when on the terminal emulator I type mount -a and it says 'mounting /dev/block/mmcb1k0p2 om /system/sd failed: no such file or directory'
Bump! PLEASE HELP ME
I was reading this thread [RECOVERY] Monster RootPack 0.7 / Clockwork Recovery 3.0.0.5 SD (1.1 Compatible!). But, since I am new to this forum I couldn't post there. I hope this is the right place to ask for help.
I upgraded my NC to 1.1.0 successfully. I put Autonooter 3.0.0 on a MicroSD card. With my NC off, I inserted the card and then plugged the NC into my PC. I got a black screen for over 5 minutes. It looked like nothing was happening, so, I disconnected the NC, removed the SD card and tired to turn the NC on. No joy, it won't turn on and won't boot at all. I think my Nook is bricked. Any ideas what went wrong?
I've read some other threads about similar problems. It seems there is a fix to get it back to stock (1.1.0). I hope the Recovery thread I mentioned above is where the answer lies. But, I'm a bit confused and don't want to make any more mistakes. I only have one 4GB SD card at my disposal right now.
My questions are as follows:
1. Is my NC bricked beyond hope of recovery?
2. If I follow the procedures in this post can I get it to boot from the sd card even though it won't turn on at all?
3. What is the difference between the Rootpack and the Clockwork Recovery Image?
4. This is the confusing part. Should I download the RootPack? Or, should I download a bootable Clockwork SD card (128mb, 1gb, 2gb, 4gb, 8gb)
5. Since I only have a 4GB card, what should I choose?
6. Should I opt for 1.0.1, or 1.1.0 where it was still working.
7. Can I get all of this on one 4GB card?
8. Is there anything else I should be weary of before starting this procedure?
If i have posted this in the wrong place, I am sorry. But, I hope someone can clear things up for me. Thanks.
This is the right place to ask general questions.
1. Most certainly not.
2. Yes, using a bootable CWR SD is the way to go.
3. Totally different. The Rootpack is the name given to a package that helps you root your Nook. CWR image is a recovery image. That means you can boot to this recovery utility and apply changes to you NC (like repairing stuff, making backups, etc.).
4. An image will adapt to the drive. If you have a 4GB SD and burn (dd) a 1GB image to it, your SD will suddenly present itself as a 1GB SD. If you format it with the right tool, your SD will be 4GB again. So don't panick, if it says 1GB after burning, it's jut "adapted to the image". You haven't lost any disk space.
5. 1GB would be enough, but you can go up to 4GB image with a 4GB.. It could sometimes be a problem to apply an image which is the exact same size as the drive. I would use th 1GB, which is plenty for what you are going to do.
6. That's up to you. Both should work.
7. Yes.
8. Just read threads exhaustively before attempting anything..
So what you need to do is read threads about this CWR Bootable img to learn how to burn it to your SD.
Then, find the appropriate .zip files to flash (apply) (1.1 recovery and 1.0.1 are available in dev section.
Copy them to root of SD.
Boot with the SD Card and apply zip files from SD.
If your NC should still have problems booting, you can also apply a boot repair zip file, that you will find on my Nook Color restore to stock tread in dev..
Sam
His Rootpack wont work on 1.1.0 You should have seen that in his instructions. It will only block 1.1.0 and fake it. You need to see this thread to fix your nook. It is 100% NOT bricked, just messed up atm. You can fix it tho. Read here:
http://forum.xda-developers.com/showthread.php?t=949699
Thanks for thr quick reponse Sam. I'm at work now, but will be able to use your suggestions later this afternoon\tonight. So, if I get a 1gb CWR image on my 4gb sd card, plus the 1.1.0 zip file and put it in the root of the sd card, the Nook should boot up even though I can't turn it on now? How long typacally will it take to boot up? What should I expect to see?
I will post results after I try the procedure. Thanks again!!
Thanks Thiboi69. I have printed out the instructions from the link you sent and will follow them to the T. I'll post results later.
It will work. I have never heard of a 100%bricked NookColor to date. And I have read 1,000's of posts here over the past 4 months. IT is just your boot partition that is messed up and B&N made it check the sdcard first for a Boot partition, then fall back to eMMC. Thank you B&N !!!
I downloaded all the files, wrote them to my sd card, and put it in the Nook. When I connected the Nook to my pc, I got a messaage the the battery was too low to turn on. So, I took the sd card out, and put the Nook on charge. After a while, it turned on, booted up and when I checked my OS, I found that I had
version 1.1.0. Apparently, my attempt to root with autonooter 3, never got installed, partially or completely. And, my battery probably got to low to turn the nook on. So, I didn't need to use CWR after all. I apologize to all who have tried to help me. But, all replies were good and contained useful info.
Now, my question is: Should I try to use Autonooter 3 again, or is there an easier
(more foolproof) way to root v1.1.0?
I just got a nook last night with the sole intention of hacking it - and did so in a matter of minutes. Autonooter couldnt be easier! When you get to the part of putting the SD card in the nook and connecting it to USB to make it boot, just plug it in and go get a cup of coffee. Don't unplug or touch anything until it boots up by itself. At 1st I thought it wasn't doing anything as I didn't see a clockwork mod screen come up or anything, but just be patient and it'll tell you when it's done. Just make sure it's pretty well charged when you do it - mine was about 80% or so.
Honestly after less than a day of the rooted stock 2.1 Eclair OS, I'm ready to drop a fully customized Froyo or Gingerbread image on this thing. Autonooter it 1st and run it for a few days 1st and see what you think. I'm still learning the ins and outs of tinkering with this thing, but so far it seems much easier than the Epic and Moment I've been beating on. Seems pretty well unbrickable too thanks to the boot to SD 1st option B&N baked into this puppy.
jostarr said:
I was reading this thread [RECOVERY] Monster RootPack 0.7 / Clockwork Recovery 3.0.0.5 SD (1.1 Compatible!). But, since I am new to this forum I couldn't post there. I hope this is the right place to ask for help.
I upgraded my NC to 1.1.0 successfully. I put Autonooter 3.0.0 on a MicroSD card. With my NC off, I inserted the card and then plugged the NC into my PC. I got a black screen for over 5 minutes. It looked like nothing was happening, so, I disconnected the NC, removed the SD card and tired to turn the NC on. No joy, it won't turn on and won't boot at all. I think my Nook is bricked. Any ideas what went wrong?
I've read some other threads about similar problems. It seems there is a fix to get it back to stock (1.1.0). I hope the Recovery thread I mentioned above is where the answer lies. But, I'm a bit confused and don't want to make any more mistakes. I only have one 4GB SD card at my disposal right now.
My questions are as follows:
1. Is my NC bricked beyond hope of recovery?
2. If I follow the procedures in this post can I get it to boot from the sd card even though it won't turn on at all?
3. What is the difference between the Rootpack and the Clockwork Recovery Image?
4. This is the confusing part. Should I download the RootPack? Or, should I download a bootable Clockwork SD card (128mb, 1gb, 2gb, 4gb, 8gb)
5. Since I only have a 4GB card, what should I choose?
6. Should I opt for 1.0.1, or 1.1.0 where it was still working.
7. Can I get all of this on one 4GB card?
8. Is there anything else I should be weary of before starting this procedure?
If i have posted this in the wrong place, I am sorry. But, I hope someone can clear things up for me. Thanks.
Click to expand...
Click to collapse
Joe, I would recommend downloading the 1gb rootpack image and a restore to stock file. Make your bootable clockwork recovery image, place the resotre to stock file on the sdcard, turn your nook off, insert the sdcard, power on and flash the file. All this info and more can be found in my thread here:
http://forum.xda-developers.com/showthread.php?t=949699
Thanks for your suggestion Riley, please take a look at my post # 7 above. Seemd my NC
had a low battery. When I charged it, all was ok. It booted up and I was back in 1.1.0.
But, I just now tried autonooter 3.0.0 again. When I pluged thr NC inyo my PC, I got some sort or warning message. I hit cancel and waited a few minutes. The message came up again. It said the device was not recognized. I unplugged, removed the card, and my fully charged NV won't turn on. And, windows explorer can not read the sd card. This is basically what happened yesterday to cause my panic. The sd card had all the files befor I inserted it into the NC. Now, it's unreadable and I can't turn on or boot the NC again.
Is it autonooter 3.0.0, or the card, or the Nook, or me?????
One correction to post # 10. I can read the sd card in windows explorer. But my NC won't turn on.
With sd card out of the Nook, I get a "Welcome to the Found New Hardware Wizzard"
What does this tell anyone about the condition of my Nook?
I am having a problem and don't really know what to do. When I start my NC its stops at the N screen and goes no further. I've tried a lot of the different ways to get it back to stock with no luck. When I try to write CWM to my SD card with win32 it either doesn't have enough room to put the stock file on the zip with it or when I open the SD card it says the card needs to be formatted. The file is a tr.gz or something like that is there a step between that I am missing or just download the CWM and write to SD using win32? I also tried adb with no luck. I am very new to rooting so any super dumbed down instructions would be greatly appreciated.
Sent from my ADR6300 using XDA App
You can put the rom image to a separate SD card. Just swap it after you boot up from cwr. I did it before for flashing froyo to emmc.
Sent from my PC36100 using XDA App
72chevy2k2 said:
I am having a problem and don't really know what to do. When I start my NC its stops at the N screen and goes no further. I've tried a lot of the different ways to get it back to stock with no luck. When I try to write CWM to my SD card with win32 it either doesn't have enough room to put the stock file on the zip with it or when I open the SD card it says the card needs to be formatted. The file is a tr.gz or something like that is there a step between that I am missing or just download the CWM and write to SD using win32? I also tried adb with no luck. I am very new to rooting so any super dumbed down instructions would be greatly appreciated.
Click to expand...
Click to collapse
Have you followed the restore-to-stock procedure outlined in this thread?
http://forum.xda-developers.com/showthread.php?t=914690
Just a noobish advise!
After configure everything and become accustomed to some of the NC behaviors this should not matter, but I remember at my first attempts at rooting the NC, using a Win7 PC was much easier than using Win XP or iOS devices. Might fix your 'not recognized' problems, sd card recognition and formatting problems etc.
It has CWM on it. I can get it to recovery but it will not recognize the SD or not mount it and I go to mount it in the menu and it says something like can not mount SD card so I have been trying to do the CWM SD burn but I keep getting the above errors I am on a vista computer so I will try it on my windows 7 one and see how that goes. And the different SD card one I will try that as well after work thank you for the help.
Sent from my ADR6300 using XDA App
RickOSidhe said:
Have you followed the restore-to-stock procedure outlined in this thread?
http://forum.xda-developers.com/showthread.php?t=914690
Click to expand...
Click to collapse
Yes I did try that one I put the nookie froyo on the SD and put it I'm my turned off NC and plugged it in to my computer and it sat at the N screen forever and after a while I took it off and it was still in the same state could the CWM be the problem?
Sent from my ADR6300 using XDA App
I'm not sure what posts 13 thru 18 have to do with my problem???
Just didn't feel like starting a new thread for the couple of questions I had along the same line as yours.
Sent from my ADR6300 using XDA App
I'm cleaning up my N1 and going from Enoms to Cyans and decided to start fresh. So I formatted (had a couple partitions for A2SD) but now I'm stuck. I don't know if I accidentally partitioned something I wasn't supposed to, or what.
Here's my current situation...
- Right now I've Clockwork's recovery and cannot boot android
- I cannot mount SD card to throw anything on it
Is there a way to mount it, remove all partitions so there's just the one (I dont want A2SD anymore) and throw Cyan's update.zip on there?
I'll gladly answer any questions, but right now I don't know what I don't know so if you've any suggestions on directions I should be going that'd be great too. It'd give me a starting point to find the answer at least.
Which recovery are you using? Clockwork 3.x by any chance?
Sent from my Nexus One using XDA Premium App
Not sure. I don't have it with me right now. I'll find out later today.
Take the sdcard out of the phone, find usb adapter to use it directly on your computer and reset the partitions to original with some partitioning program and try it in your phone again after that.
I'm running clockwork 2.5.1.0.
I don't have a card reader. I suppose I could get one but is there a way to do it without one? I usually use my phone as a reader but I've even put the card in my thunderbolt but no dice.
Figured it out... I put cyan on the sd of my thunderbolt and put it into my N1 and installed cyan 7 on my N1. From there I was able to use rom manager to re-partition the card. Appears to be working fine now.
I use the SD card method to have the nook boot into CM7 and when the SD card is pulled, the nook would be stock to be used by my kids. But I think I messed things up and can't restore. Here is what I have done:
1- I tried to update the stock version to 1.3 manually from B&N website but soon realized I could not. It seems like when in CM7, I had tried to flash CWM recovery (which was not needed and is pretty buggy in SD card method for nook). Now the recovery in emmc appears to be CWM.
2-for some stupid reason when I got into CMM recovery, I formatted boot, system,data and cache (not sure if I did boot also or not). My thinking was to flash a stock image and be fixed. But I am now stuck.
Is there a way to go back to stock on the nook? I am still able to boot into SD card and CM7 nightly. Oh ya, I use Linux Ubuntu not windows. TIA
Sounds like you should get the system back to stock before proceeding any further.
Follow the instruction here: http://www.nookdevs.com/NookColor_UnRooting
The problem is that I get into the CWM recovery and not given the reset option following the options on that page. Any idea?
I think my problem is that I'm not really rooted in true sense since I was running off the SD card. Maybe I shoudl root properly, then unroot?
I did kind of the same thing once. I made an Sd card image with CWM on another sd card -- basically as if you are going to install CM7 to emmc. However, once you get to the point where you would flash Cm7, use the stock zip ROM. It will install that to emmc so it will be back to normal. You should then be good to go.
loveubuntu said:
The problem is that I get into the CWM recovery and not given the reset option following the options on that page. Any idea?
I think my problem is that I'm not really rooted in true sense since I was running off the SD card. Maybe I shoudl root properly, then unroot?
Click to expand...
Click to collapse
If you follow the instructions you should be left with an unrooted initialized stock Nook Color. Register your account. Then you can wait for the NC to download the 1.3 update, or side load it. Once that is installed you have an unrooted 1.3 stock system.
From there you can try your CM7 card. Don't forget to remove your SD card at the very beginning since like a PC the NC will try to boot off the SD card if it is present.
jerrykur said:
If you follow the instructions you should be left with an unrooted initialized stock Nook Color. Register your account. Then you can wait for the NC to download the 1.3 update, or side load it. Once that is installed you have an unrooted 1.3 stock system.
From there you can try your CM7 card. Don't forget to remove your SD card at the very beginning since like a PC the NC will try to boot off the SD card if it is present.
Click to expand...
Click to collapse
when I follow the instruction, I am not given the factory reset option. I am stuck at the n screen. It flashed the read forever but then stuck at the n screen. Do I have to wait longer than 5 minutes?
None of this is mine, I owe it ALL to the threads mentioned below.
So as in many posts on XDA say, it's almost impossible to brick the Nook. What a great device. I had to format my SD card to use it to "un-brick" my nook but it was done. I Mainly used the info here http://forum.xda-developers.com/showthread.php?t=949699
Burnt a bootable CWM image onto my SD card. It took a while doing it with dd in Linux. I'm sure it's the same in Windows or Mac. It took about 20-30 minutes. It also took a while to unzip/extract the img file from the downloaded file. Be patient
Then used the CWM recovery remover file from http://forum.xda-developers.com/showthread.php?t=914690 to remove my CWM recovery and used the 1.0.1 file from same thread to flash the stock image onto the nook.
Once the SD card is ready, just drop those files in the root of the sd card. It should have 4 other files in it to boot into CWM recovery from the sd card and let you use the menus to flash those two zip files. It took a while but it's all in those threads. Thanks to the members. Now lets see if I can go up to 1.3 and then root it again.
you also need to do this
http://forum.xda-developers.com/showthread.php?t=1094371
and here is the ver 1.2 stock flashable with an clockwork bootable sd card
http://forum.xda-developers.com/showthread.php?t=1050520