I was reading this forum for couple of days, and by now i know that i can install Windows Mobile 6.5 on my HTC Tytn 2 (curently having Windows Mobile 6.1). And i can install android (while still having Windows Mobile 6.1)...
1. But can i install Windows Mobile 6.5 and then install Android (preferably froyo 2.2), so that at the end i have both of those sistems?
2. And if something goes wrong, or i simply dont like one of those, can i remove one of them?
3. Or can i even remove both of them and go back to my wm 6.1?
badboys3 said:
1. But can i install Windows Mobile 6.5 and then install Android (preferably froyo 2.2), so that at the end i have both of those sistems?
2. And if something goes wrong, or i simply dont like one of those, can i remove one of them?
3. Or can i even remove both of them and go back to my wm 6.1?
Click to expand...
Click to collapse
Hello and welcome to the forum
The answer for all of your question above is :
Yes you can
first you have to realize that only one system can be flashed on your device whether it is Android or Windows Mobile. So, if you want to try both on your kaiser you could flash WM 6.5 to your ROM and install run android on your SD card by using Haret.
and if you want to revert back to WM 6.1, you can always flash your stock WM 6.1 ROM.
Here is some guide that might help you
1. How to flash
[Resources] Flashing Your First Kaiser Rom (For Noobs)
2. How to install android on your SD card
how to install with atools and haret
you can download atools and its requirement here :
Atools: all android tool you need
3. Where you can find stock WM 6.1 ROM
- download from official HTC website
- or search here http://shipped-roms.com/shipped/Kaiser/
follow all the steps on each guide carefully and good luck
Than you very much.
hie,
my friend have HTC Kaiser he also want to install android on his kaiser any one tell me that android on kaiser run perfectly means all functions work perfectly or not? & he can install android on kaisers device memory?
Related
just download and use this program:
http://www.megaupload.com/?d=8UHY6PRP
and follow the instructions
Tried it?
Hoi
I upgraded to M 6.5 and want to go back to 6.0 will this work for me?
Jurgen
wm 6.5
THIS IS THE UPGRADE TO WM6.5 from veisen !!!!
Jurgen
yes but it has wm 5.0 rom inside so it actually installs windows mobile 5
Call me Noob, but the zip file downloaded contains four different executable programs with no instructions (e.g. readme.txt, etc.).
In what order are these to be run?
sorry,
run the romupgradeutility.exe only don't run the others
I am new with HTC mobile and windows os, i am using HTC touch viva with windows 6.1 which came with it..
I want to flash it with windows mobile 6.5 LInK posted in the opel form, can some one give step by step tutorial how to flash my HTC touch viva..
If possible can u guyzz post pic tutorial for it...
Thanks in advance guyzzz...
Note: Running Windows 7 without internet
If possible can u give me a the best Win 6.5 stable ROm for me....
Thanks in advance...
I ram Hard spl and then wat should i do and how should i install the coustom rom after it
Easy
I had the exact same problem when i first started to flash htc opal... didn't know how to do it, and didn't know what rom to use... maybe someone should create a complete, step by step guide (flashing opal for dummies) and post it as sticky...
ok, here it goes...
Flashing:
0.- if you'll be using a cooked rom (a modified Rom), you'll need to do a hardSPL. check here: http://forum.xda-developers.com/showthread.php?t=446446
1.- Make sure that you have activesync if you are using windows xp or windows device manager if you are using windows vista and the latest version of .net framework installed on your pc.
2.- unzip the new rom files on a folder somewhere accesible (desktop for example)
3.- connect the device as an activesync conection, make sure the battery is charged 50% or more
4.- just run the RUU installer (Rom Update Utility), sometimes named CustomRUU.
5.- Follow the onscreen instructions.
YOU ARE DONE.
that's it... no complications, no special drivers, no weird commands or files to copy and paste. so simple. Just one thing: make sure you don't disconect usb during rom update.
so, resumed: Download Rom, Connect activesync, run RUU, done.
About what's the best 6.5 rom: PhamQuang. check for the latest on the rom development section. but different users will recommend different roms, so i'll recommend to try several before sticking to a particular one.
Ran Hard spl and then wat should i do to install the custom Rom
I have a Topaz T5353 with Android installed only, but Android is with many problems, is to install Windows 6.5 on it? I can not install the methods of the forum because the pc does not recognize him, only the contents of the SD Card.
How do I become root? I wanted to upgrade at least the new version for Android.
Any help appreciate.
Thanks
kinda newbie here in terms of custom ROMs or flashing but could somebody give me a step by step procedure for me to be able to upgrade my xperia x1 6.1 to 6.5? just don't want to brick my phone.
i know that there are lots of tutorial here but i can't find which is the best & stable.
every one is quite stable, if you charge your phone 100% and don't plug your cable out of the phone nothing will go wrong.
After hardspl use SD-Methode to put your 6.5 rom on your phone it's the simpliest way, there you cannot damage your phone with putting a x1 rom on your x1 (with roms from other phones it could damage your phone but i am not sure)
1-unlock yr phone with spl 0.78
2-connect phone with full charge(20% is enough)
note: DON'T use task 29 if u don't flash yr device everyday!
3-try romes to find yr best choice
there is nothing in a simple regular flashing to brick the device
thanks for the replies, im trying to consider this ROM but when i read the thread i found that there are some bugs.
is it possible to revert to 6.1 if you're not satisfied with 6.5? could a simple hard reset do the job?
Wakatsik said:
thanks for the replies, im trying to consider this ROM but when i read the thread i found that there are some bugs.
is it possible to revert to 6.1 if you're not satisfied with 6.5? could a simple hard reset do the job?
Click to expand...
Click to collapse
it's good rom but I suggest this one....It's stable & up to date.don't use htc rom just download GTX 2.2.0 & enjoy!
about the question.no the rom is not a program,It's the os of device.like your pc.it's like that you install windows 7 instead of XP so if you Decide to go back to XP you neet to install it.
if you want to go back to WM 6.1 you need to flash the stock rom again(that is simple).but I think you'll never go back to 6.1
the link for rom I proposed
Dynamics 2.2.0
manishabanzadeh said:
it's good rom but I suggest this one....It's stable & up to date.don't use htc rom just download GTX 2.2.0 & enjoy!
about the question.no the rom is not a program,It's the os of device.like your pc.it's like that you install windows 7 instead of XP so if you Decide to go back to XP you neet to install it.
if you want to go back to WM 6.1 you need to flash the stock rom again(that is simple).but I think you'll never go back to 6.1
Click to expand...
Click to collapse
thanks, will try that & give you feedback
another set of questions....
these are the instructions in flashing x1 to 6.5 but don't understand most of it, sorry for the stupidity =)
-----------------------------------------------------------------------------
Installing:
0) Make a system backup!
Useful apps: SPB Backup, PPC Pim Backup, Sprite Backup
1) Install Hard-SPL 0.78 by OliNex!
2) Put needed cabs to \Storage Card\autocfg\.
Supported formats: *.cab, *.provxml, *.reg, *.rgu.
*.CAB: by default they will be installed to internal memory. Cabs with "_ui" in their names will have an opportunity to be
installed to storage card.
*.EXE: AlphaUC can install *.EXEs from \Storage Card\autocfg\exe\. If you add "_nowait" to filename, customizer won't wait
until it finishes
3) Use task29. !!! Put kovsimg.nbh to storage card !!!
Link: http://forum.xda-developers.com/showthread.php?t=649230
4) Then flash needed ROM as always (via storage card or via CustomRUU). Make a Hard-Reset.
5) Wait for the end of customization. You will see message about it on the second launch.
After that make a soft-reset.
-----------------------------------------------------------------------------
help, the link for task29 is missing, how can i continue?
for number 4, how will i do that?
android froyo 2.2 for xperia x1
hello, guys i'm kinda newbie. how do i get the android froyo 2.2 for my xperia x1. pls help. thanks
hello, my friend has bought used htc tytn ii and didn't know that there is android installed (and locked). He also doesn't speak english so he needs czech OS. I don't have experience with flashing smartphones, I quit flashing while I was using old SE. If there is anyone who could help me with flashing back to WM from android, please do. I have RUU rom WM 6.1 I'd like to use, but android phone won't connect via activesync.
Thanks.
Xaverek said:
hello, my friend has bought used htc tytn ii and didn't know that there is android installed (and locked). He also doesn't speak english so he needs czech OS. I don't have experience with flashing smartphones, I quit flashing while I was using old SE. If there is anyone who could help me with flashing back to WM from android, please do. I have RUU rom WM 6.1 I'd like to use, but android phone won't connect via activesync.
Thanks.
Click to expand...
Click to collapse
Try using the sd card method. copy Kaiser CustomRUU.exe and RUU rom WM6.1 on the formatted FAT32 sd card and put in TRI color mode and see whether it works or not.
Or, install czech language pack for android? afaik if your android is stable, it's far more usefull then winmo 6.1 could ever be.